Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is
to allow to move defrag specific code out of ctree.c and into defrag.c in
one of the next patches.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
The recently submitted fix-commit revealed a problem in the iDMA 32-bit
platform code. Even though the controller supported only a single master
the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs
0 and 1. As a result the sanity check implemented in the commit b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
got incorrect interface data width and thus prevented the client drivers
from configuring the DMA-channel with the EINVAL error returned. E.g.,
the next error was printed for the PXA2xx SPI controller driver trying
to configure the requested channels:
> [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed
> [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor
> [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16
The problem would have been spotted much earlier if the iDMA 32-bit
controller supported more than one master interfaces. But since it
supports just a single master and the iDMA 32-bit specific code just
ignores the master IDs in the CTLLO preparation method, the issue has
been gone unnoticed so far.
Fix the problem by specifying the default master ID for both memory
and peripheral devices in the driver data. Thus the issue noticed for
the iDMA 32-bit controllers will be eliminated and the ACPI-probed
DW DMA controllers will be configured with the correct master ID by
default.
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
Move the declaration of the 'ib_sge list' variable outside the
'always_invalidate' block to ensure it remains accessible for use
throughout the function.
Previously, 'ib_sge list' was declared within the 'always_invalidate'
block, limiting its accessibility, then caused a
'BUG: kernel NULL pointer dereference'[1].
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2d0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? memcpy_orig+0xd5/0x140
rxe_mr_copy+0x1c3/0x200 [rdma_rxe]
? rxe_pool_get_index+0x4b/0x80 [rdma_rxe]
copy_data+0xa5/0x230 [rdma_rxe]
rxe_requester+0xd9b/0xf70 [rdma_rxe]
? finish_task_switch.isra.0+0x99/0x2e0
rxe_sender+0x13/0x40 [rdma_rxe]
do_task+0x68/0x1e0 [rdma_rxe]
process_one_work+0x177/0x330
worker_thread+0x252/0x390
? __pfx_worker_thread+0x10/0x10
This change ensures the variable is available for subsequent operations
that require it.
Check the return value of clk_prepare_enable to ensure that priv->clk has
been successfully enabled.
If priv->clk was not enabled during bcm_sysport_probe, bcm_sysport_resume,
or bcm_sysport_open, it must not be disabled in any subsequent execution
paths.
Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241227123007.2333397-1-mordan@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Initialize meter_urb array before use in mixer_us16x08.c.
CID 1410197: (#1 of 1): Uninitialized scalar variable (UNINIT)
uninit_use_in_call: Using uninitialized value *meter_urb when
calling get_meter_levels_from_urb.
802.2+LLC+SNAP frames received by napi_complete_done with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. As snap_rcv expects transport_header
to point to SNAP header (OID:PID) after LLC processing advances offset
over LLC header (llc_rcv & llc_fixup_skb), code doesn't find a match
and packet is dropped.
Between napi_complete_done and snap_rcv, transport_header is not used
until __netif_receive_skb_core, where originally it was being reset.
Commit fda55eca5a33 ("net: introduce skb_transport_header_was_set()")
only does so if not set, on the assumption the value was set correctly
by GRO (and also on assumption that "network stacks usually reset the
transport header anyway"). Afterwards it is moved forward by
llc_fixup_skb.
Locally generated traffic shows up at __netif_receive_skb_core with no
transport_header set and is processed without issue. On a setup with
GRO but no DSA, transport_header and network_header are both set to
point to skb->data which is also correct.
As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on previous code change,
llc_fixup_skb to reset the offset after skb pull. llc_fixup_skb
assumes the LLC header is at skb->data, and by definition SNAP header
immediately follows.
Fixes: fda55eca5a33 ("net: introduce skb_transport_header_was_set()") Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241225010723.2830290-1-antonio.pastor@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================
This issue occurs because the skb buffer is too small, and it's actual
allocation is aligned. This hides an actual issue, which is that nr_route_frame
does not validate the buffer size before using it.
Fix this issue by checking skb->len before accessing any fields in skb->data.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
QP table handling is synchronized with destroy QP and Async
event from the HW. The same needs to be synchronized
during create_qp also. Use the same lock in create_qp also.
Fixes: 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array") Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error") Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/20241217102649.1377704-6-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While creating qps, the driver adds one extra entry to the sq size passed
by the ULPs in order to avoid queue full condition. When ULPs creates QPs
with max_qp_wr reported, driver creates QP with 1 more than the max_wqes
supported by HW. Create QP fails in this case. To avoid this error, reduce
1 entry in max_qp_wqes and report it to the stack.
When RDMA app configures path MTU, add a check in modify_qp verb
to make sure that it doesn't go beyond interface MTU. If this
check fails, driver will fail the modify_qp verb.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Different core device types such as PFs and VFs shouldn't be affiliated
together since they have different capabilities, fix that by enforcing
type check before doing the affiliation.
Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Subsequent patch implements helper API which has mlx5_core_dev
as const pointer, make its caller API too const *.
Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: e05feab22fd7 ("RDMA/mlx5: Enforce same type port association for multiport RoCE") Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as
Intel Meteor Lake with some small differences in the host router (it has
3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the
driver list of supported devices.
Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P") Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P") Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel Meteor Lake has the same integrated Thunderbolt/USB4 controller as
Intel Alder Lake. Add the Intel Meteor Lake PCI IDs to the driver list
of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P") Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel Raptor Lake has the same integrated Thunderbolt/USB4 controller as
Intel Alder Lake. By default it is still using firmware based connection
manager so we can use most of the Alder Lake flows.
Signed-off-by: George D Sworo <george.d.sworo@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P") Signed-off-by: Sasha Levin <sashal@kernel.org>
Alder Lake has the same integrated Thunderbolt/USB4 controller as
Intel Tiger Lake. By default it is still using firmware based connection
manager so we can use most of the Tiger Lake flows.
Add the Alder Lake PCI IDs to the driver list of supported devices.
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P") Signed-off-by: Sasha Levin <sashal@kernel.org>
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels.
Cc: stable@vger.kernel.org Fixes: fa1aa143ac4a ("selinux: extended permissions for ioctls") Signed-off-by: Thiébaud Weksteen <tweek@google.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Paasch reports [1] about incorrect skb->truesize
after skb_expand_head() call in ip6_xmit.
This may happen because of two reasons:
- skb_set_owner_w() for newly cloned skb is called too early,
before pskb_expand_head() where truesize is adjusted for (!skb-sk) case.
- pskb_expand_head() does not adjust truesize in (skb->sk) case.
In this case sk->sk_wmem_alloc should be adjusted too.
[1] https://lkml.org/lkml/2021/8/20/1082
Fixes: f1260ff15a71 ("skbuff: introduce skb_expand_head()") Fixes: 2d85a1b31dde ("ipv6: ip6_finish_output2: set sk into newly allocated nskb") Reported-by: Christoph Paasch <christoph.paasch@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/644330dd-477e-0462-83bf-9f514c41edd1@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the
function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will
release all resources related to the hashed `nfs4_client`. If the
`nfsd_client_shrinker` is running concurrently, the `expire_client`
function will first unhash this client and then destroy it. This can
lead to the following warning. Additionally, numerous use-after-free
errors may occur as well.
====================================================================
BUG nfsd_file_mark (Tainted: G B W ): Objects remaining
nfsd_file_mark on __kmem_cache_shutdown()
--------------------------------------------------------------------
To resolve this issue, cancel `nfsd_shrinker_work` using synchronous
mode in nfs4_state_shutdown_net.
Fixes: 7c24fa225081 ("NFSD: replace delayed_work with work_struct for nfsd_client_shrinker") Signed-off-by: Yang Erkun <yangerkun@huaweicloud.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory.
Linux currently sets the TCR_EL1.AS bit unconditionally during CPU
bring-up. On an 8-bit ASID CPU, this is RES0 and ignored, otherwise
16-bit ASIDs are enabled. However, if running in a VM and the hypervisor
reports 8-bit ASIDs (ID_AA64MMFR0_EL1.ASIDBits == 0) on a 16-bit ASIDs
CPU, Linux uses bits 8 to 63 as a generation number for tracking old
process ASIDs. The bottom 8 bits of this generation end up being written
to TTBR1_EL1 and also used for the ASID-based TLBI operations as the
upper 8 bits of the ASID. Following an ASID roll-over event we can have
threads of the same application with the same 8-bit ASID but different
generation numbers running on separate CPUs. Both TLB caching and the
TLBI operations will end up using different actual 16-bit ASIDs for the
same process.
A similar scenario can happen in a big.LITTLE configuration if the boot
CPU only uses 8-bit ASIDs while secondary CPUs have 16-bit ASIDs.
Ensure that the ASID generation is only tracked by bits 16 and up,
leaving bits 15:8 as 0 if the kernel uses 8-bit ASIDs. Note that
clearing TCR_EL1.AS is not sufficient since the architecture requires
that the top 8 bits of the ASID passed to TLBI instructions are 0 rather
than ignored in such configuration.
Cc: stable@vger.kernel.org Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241203151941.353796-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 0c8ea531b774 ("arm64: mm: Allocate ASIDs in pairs") introduce
the asid2idx and idx2asid macro, but these macros are not really useful
after the commit f88f42f853a8 ("arm64: context: Free up kernel ASIDs if
KPTI is not in use").
The code "(asid & ~ASID_MASK)" can be instead by a macro, which is the
same code with asid2idx(). So rename it to ctxid2asid() for a better
understanding.
Also we add asid2ctxid() macro, the contextid can be generated based on
the asid and generation through this macro.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/r/c31516eb-6d15-94e0-421c-305fc010ea79@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: c0900d15d31c ("arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs") Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
When the stream_verdict program returns SK_PASS, it places the received skb
into its own receive queue, but a recursive lock eventually occurs, leading
to an operating system deadlock. This issue has been present since v6.9.
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
[ shung-hsi.yu: break up existing seq_printf() call since commit 68b04864ca42
("bpf: Create links for BPF struct_ops maps.") is not present ] Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Like skb_realloc_headroom(), new helper increases headroom of specified skb.
Unlike skb_realloc_headroom(), it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case
of failures.
This helps to simplify ip[6]_finish_output2() and a few other similar cases.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit f1260ff15a71b8fc122b2c9abd8a7abffb6e0168) Signed-off-by: Harshvardhan Jha <harshvardhan.j.jha@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.
Cc: Yi Sun <yi.sun@unisoc.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux.dev Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
This partially reverts commit 812fe6420a6e ("scsi: storvsc: Handle
additional SRB status values").
HyperV does not support MAINTENANCE_IN resulting in FC passthrough
returning the SRB_STATUS_DATA_OVERRUN value. Now that
SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go
into a faulty state as multipath ALUA submits RTPG commands via
MAINTENANCE_IN.
When Z60MR100 startup, speaker will output a pop. To fix this issue,
we mute codec by init verbs in bios when system startup, and set GPIO
to low to unmute codec in codec driver when it loaded .
[ white space fixes and compile warning fix by tiwai ]
Fix the hardware revision numbering for Qlogic ISP1020/1040 boards. HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free.
The at_xdmac_memset_create_desc may return NULL, which will lead to a
null pointer dereference. For example, the len input is error, or the
atchan->free_descs_list is empty and memory is exhausted. Therefore, add
check to avoid this.
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Cc: stable@vger.kernel.org Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There may be a potential integer overflow issue in inftl_partscan().
parts[0].size is defined as "uint64_t" while mtd->erasesize and
ip->firstUnit are defined as 32-bit unsigned integer. The result of
the calculation will be limited to 32 bits without correct casting.
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62df8 ("bpf: add bpf_skb_change_tail helper") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Now, the epoll only use wake_up() interface to wake up task.
However, sometimes, there are epoll users which want to use
the synchronous wakeup flag to hint the scheduler, such as
Android binder driver.
So add a wake_up_sync() define, and use the wake_up_sync()
when the sync is true in ep_poll_callback().
Co-developed-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> Link: https://lore.kernel.org/r/20240426080548.8203-1-xuewen.yan@unisoc.com Tested-by: Brian Geffon <bgeffon@google.com> Reviewed-by: Brian Geffon <bgeffon@google.com> Reported-by: Benoit Lize <lizeb@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It becomes a path component, so it shouldn't exceed NAME_MAX
characters. This was hardened in commit c152737be22b ("ceph: Use
strscpy() instead of strcpy() in __get_snap_name()"), but no actual
check was put in place.
__of_get_dma_parent() returns OF device node @args.np, but the node's
refcount is increased twice, by both of_parse_phandle_with_args() and
of_node_get(), so causes refcount leakage for the node.
Fix by directly returning the node got by of_parse_phandle_with_args().
Fixes: f83a6e5dea6c ("of: address: Add support for the parent DMA bus") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241206-of_core_fix-v1-4-dc28ed56bec3@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code uses some 'goto put;' to cancel the parsing operation
and can lead to a return code value of 0 even on error cases.
Indeed, some goto calls are done from a loop without setting the ret
value explicitly before the goto call and so the ret value can be set to
0 due to operation done in previous loop iteration. For instance match
can be set to 0 in the previous loop iteration (leading to a new
iteration) but ret can also be set to 0 it the of_property_read_u32()
call succeed. In that case if no match are found or if an error is
detected the new iteration, the return value can be wrongly 0.
Avoid those cases setting the ret value explicitly before the goto
calls.
Fixes: bd6f2fd5a1d5 ("of: Support parsing phandle argument lists through a nexus node") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20241202165819.158681-1-herve.codina@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When F_SEAL_FUTURE_WRITE was introduced, it was overlooked that udmabuf
must reject memfds with this flag, just like ones with F_SEAL_WRITE.
Fix it by adding F_SEAL_FUTURE_WRITE to SEALS_DENIED.
Fixes: ab3948f58ff8 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Cc: stable@vger.kernel.org Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204-udmabuf-fixes-v2-2-23887289de1c@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because the inode bitmap is corrupted, an inode with an inode number that
should exist as a ".nilfs" file was reassigned by nilfs_mkdir for "file0",
causing an inode duplication during execution. And this causes an
underflow of i_nlink in rmdir operations.
The inode is used twice by the same task to unmount and remove directories
".nilfs" and "file0", it trigger warning in nilfs_rmdir.
Avoid to this issue, check i_nlink in nilfs_iget(), if it is 0, it means
that this inode has been deleted, and iput is executed to reclaim it.
When the server is recalling a layout, we should ignore the count of
outstanding layoutget calls, since the server is expected to return
either NFS4ERR_RECALLCONFLICT or NFS4ERR_RETURNCONFLICT for as long as
the recall is outstanding.
Currently, we may end up livelocking, causing the layout to eventually
be forcibly revoked.
Fixes: bf0291dd2267 ("pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can happen because the KVP/VSS channel callback can be invoked
even before the channel is fully opened:
1) as soon as hv_kvp_init() -> hvutil_transport_init() creates
/dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and
register itself to the driver by writing a message KVP_OP_REGISTER1 to the
file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and
reading the file for the driver's response, which is handled by
hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done().
2) the problem with kvp_register_done() is that it can cause the
channel callback to be called even before the channel is fully opened,
and when the channel callback is starting to run, util_probe()->
vmbus_open() may have not initialized the ringbuffer yet, so the
callback can hit the panic of NULL pointer dereference.
To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in
__vmbus_open(), just before the first hv_ringbuffer_init(), and then we
unload and reload the driver hv_utils, and run the daemon manually within
the 10 seconds.
Fix the panic by reordering the steps in util_probe() so the char dev
entry used by the KVP or VSS daemon is not created until after
vmbus_open() has completed. This reordering prevents the race condition
from happening.
Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241106154247.2271-3-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes 2113536.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+ Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/ Reported-by: Frankie Fisher <frankie@terrorise.me.uk> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "zram: fix backing device setup issue", v2.
This series fixes two bugs of backing device setting:
- ZRAM should reject using a zero sized (or the uninitialized ZRAM
device itself) as the backing device.
- Fix backing device leaking when removing a uninitialized ZRAM
device.
This patch (of 2):
Setting a zero sized block device as backing device is pointless, and one
can easily create a recursive loop by setting the uninitialized ZRAM
device itself as its own backing device by (zram0 is uninitialized):
echo /dev/zram0 > /sys/block/zram0/backing_dev
It's definitely a wrong config, and the module will pin itself, kernel
should refuse doing so in the first place.
By refusing to use zero sized device we avoided misuse cases including
this one above.
On SH, devm_clk_get_optional_enabled() fails with -EINVAL if the clock
is not found. This happens because __devm_clk_get() assumes it can pass
a NULL clock pointer (as returned by clk_get_optional()) to the init()
function (clk_prepare_enable() in this case), while the SH
implementation of clk_enable() considers that an error.
Fix this by making the SH clk_enable() implementation return zero
instead, like the Common Clock Framework does.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/b53e6b557b4240579933b3359dda335ff94ed5af.1675354849.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The values returned by the driver after processing the contents of the
Temperature Result and the Temperature Limit Registers do not correspond to
the TMP512/TMP513 specifications. A raw register value is converted to a
signed integer value by a sign extension in accordance with the algorithm
provided in the specification, but due to the off-by-one error in the sign
bit index, the result is incorrect.
According to the TMP512 and TMP513 datasheets, the Temperature Result (08h
to 0Bh) and Limit (11h to 14h) Registers are 13-bit two's complement
integer values, shifted left by 3 bits. The value is scaled by 0.0625
degrees Celsius per bit. E.g., if regval = 1 1110 0111 0000 000, the
output should be -25 degrees, but the driver will return +487 degrees.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Murad Masimov <m.masimov@maxima.ru> Link: https://lore.kernel.org/r/20241216173648.526-4-m.masimov@maxima.ru
[groeck: fixed description line length] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-------------------------------
| If Number | Function |
-------------------------------
| 2 | USB AP Log Port |
-------------------------------
| 3 | USB AP GNSS Port|
-------------------------------
| 4 | USB AP META Port|
-------------------------------
| 5 | ADB port |
-------------------------------
| 6 | USB MD AT Port |
------------------------------
| 7 | USB MD META Port|
-------------------------------
| 8 | USB NTZ Port |
-------------------------------
| 9 | USB Debug port |
-------------------------------
Signed-off-by: Jack Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested successfully connecting to the Internet via rndis interface after
dialing via AT commands on If#=3 or If#=4.
Not sure of the purpose of the other serial interfaces.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When looking up a non-existent file, efivarfs returns -EINVAL if the
file does not conform to the NAME-GUID format and -ENOENT if it does.
This is caused by efivars_d_hash() returning -EINVAL if the name is not
formatted correctly. This error is returned before simple_lookup()
returns a negative dentry, and is the error value that the user sees.
Fix by removing this check. If the file does not exist, simple_lookup()
will return a negative dentry leading to -ENOENT and efivarfs_create()
already has a validity check before it creates an entry (and will
correctly return -EINVAL)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org>
[ardb: make efivarfs_valid_name() static] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the RIIC driver may run the I2C bus faster than requested,
which may cause subtle failures. E.g. Biju reported a measured bus
speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L.
The initial calculation of the bus period uses DIV_ROUND_UP(), to make
sure the actual bus speed never becomes faster than the requested bus
speed. However, the subsequent division-by-two steps do not use
round-up, which may lead to a too-small period, hence a too-fast and
possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed
of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806
resp. 403226 Hz instead of 97656 resp. 390625 Hz.
Fix this by using DIV_ROUND_UP() in the subsequent divisions, too.
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Value 0 in ADMA length descriptor is interpreted as 65536 on new Tegra
chips, remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk to make sure max
ADMA2 length is 65536.
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding
it to a set of type list:set and populating it from iptables SET target
triggers a kernel warning:
| WARNING: possible recursive locking detected
| 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted
| --------------------------------------------
| ping/4018 is trying to acquire lock:
| ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
|
| but task is already holding lock:
| ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set]
This is a false alarm: ipset does not allow nested list:set type, so the
loop in list_set_kadd() can never encounter the outer set itself. No
other set type supports embedded sets, so this is the only case to
consider.
To avoid the false report, create a distinct lock class for list:set
type ipset locks.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b03 ("net-next/hinic: Add logical Txq and Rxq") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use memdup_user_nul() helper instead of open-coding to
simplify the code.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: ee76746387f6 ("netdevsim: prevent bad user input in nsim_dev_health_break_write()") Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them.
Fixes: e7b7a64a8493 ("smc: support variable CLC proposal messages") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When application sending data more than sndbuf_space, there have chances
application will sleep in epoll_wait, and will never be wakeup again. This
is caused by a race between smc_poll and smc_cdc_tx_handler.
application tasklet
smc_tx_sendmsg(len > sndbuf_space) |
epoll_wait for EPOLL_OUT,timeout=0 |
smc_poll |
if (!smc->conn.sndbuf_space) |
| smc_cdc_tx_handler
| atomic_add sndbuf_space
| smc_tx_sndbuf_nonfull
| if (!test_bit SOCK_NOSPACE)
| do not sk_write_space;
set_bit SOCK_NOSPACE; |
return mask=0; |
Application will sleep in epoll_wait as smc_poll returns 0. And
smc_cdc_tx_handler will not call sk_write_space because the SOCK_NOSPACE
has not be set. If there is no inflight cdc msg, sk_write_space will not be
called any more, and application will sleep in epoll_wait forever.
So check sndbuf_space again after NOSPACE flag is set to break the race.
Fixes: 8dce2786a290 ("net/smc: smc_poll improvements") Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fast symlink can be used if the on-disk symlink data is stored
in the same block as the on-disk inode, so we don’t need to trigger
another I/O for symlink data. However, currently fs correction could be
reported _incorrectly_ if inode xattrs are too large.
In fact, these should be valid images although they cannot be handled as
fast symlinks.
projects / thirdparty / kernel / stable.git / log
