If the function validate_user_input() returns an error, the error path
attempts to unlock an unacquired mutex.
Acquire the mutex before calling validate_user_input(). This is not
strictly necessary but simplifies the code.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The input argument `sla_in` is a pointer to a structure that contains
the parameters of the SLA which is being added or updated.
If this pointer is NULL, the function should return an error as
the data required for the algorithm is not available.
By mistake, the logic jumps to the error path which dereferences
the pointer.
This results in a warnings reported by the static analyzer Smatch when
executed without a database:
drivers/crypto/intel/qat/qat_common/adf_rl.c:871 add_update_sla()
error: we previously assumed 'sla_in' could be null (see line 812)
This issue was not found in internal testing as the pointer cannot be
NULL. The function add_update_sla() is only called (indirectly) by
the rate limiting sysfs interface implementation in adf_sysfs_rl.c
which ensures that the data structure is allocated and valid. This is
also proven by the fact that Smatch executed with a database does not
report such error.
Fix it by returning with error if the pointer `sla_in` is NULL.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Having multiple in-flight AIO requests results in unpredictable
output because they all share the same IV. Fix this by only allowing
one request at a time.
Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to algif_aead") Fixes: a596999b7ddf ("crypto: algif - change algif_skcipher to be asynchronous") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When dma_map_single() fails, wa->address is supposed to be freed
by the callers of ccp_init_dm_workarea() through ccp_dm_free().
However, many of the call spots don't expect to have to call
ccp_dm_free() on failure of ccp_init_dm_workarea(), which may
lead to a memleak. Let's free wa->address in ccp_init_dm_workarea()
when dma_map_single() fails.
Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x2d/0x50
adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
adf_rl_stop+0x2d/0xb0 [intel_qat]
adf_dev_stop+0x33/0x1d0 [intel_qat]
adf_dev_down+0xf1/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
The qat_ras sysfs attribute group is registered within the
adf_dev_start() function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_ras attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_ras' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x29/0x50
adf_sysfs_stop_ras+0x4b/0x80 [intel_qat]
adf_dev_stop+0x43/0x1d0 [intel_qat]
adf_dev_down+0x4b/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.
This fixes list_add corruption error when the driver is returned
with -EPROBE_DEFER. It is also required to roll back the previous
probe sequences in case of deferred_probe. So, this removes
'err_probe_defer" goto label and just use err_dma_init instead.
Fixes: 42ef0e944b01 ("crypto: starfive - Add crypto engine support") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "ring" variable has an upper bounds check but nothing checks for
negatives. This code uses kstrtouint() already and it was obviously
intended to be declared as unsigned int. Make it so.
Fixes: dbc8876dd873 ("crypto: qat - add rp2svc sysfs attribute") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Static checkers insist that the mpi_alloc() allocation can fail so add
a check to prevent a NULL dereference. Small allocations like this
can't actually fail in current kernels, but adding a check is very
simple and makes the static checkers happy.
Fixes: 6637e11e4ad2 ("crypto: rsa - allow only odd e and restrict value in FIPS mode") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The IPv6 network stack first checks the sockaddr length (-EINVAL error)
before checking the family (-EAFNOSUPPORT error).
This was discovered thanks to commit a549d055a22e ("selftests/landlock:
Add network tests").
Cc: Eric Paris <eparis@parisplace.org> Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com Fixes: 0f8db8cc73df ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()") Signed-off-by: Mickaël Salaün <mic@digikod.net> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Detailed reproduction information available at the Link [1],
In the normal case, obtain gluebi->desc in the gluebi_get_device(),
and access gluebi->desc in the gluebi_read(). However,
gluebi_get_device() is not executed in advance in the
ftl_add_mtd() process, which leads to NULL pointer dereference.
The solution for the gluebi module is to run jffs2 on the UBI
volume without considering working with ftl or mtdblock [2].
Therefore, this problem can be avoided by preventing gluebi from
creating the mtdblock device after creating mtd partition of the
type MTD_UBIVOLUME.
In kunit_debugfs_create_suite() give up and skip creating the debugfs
file if any of the alloc_string_stream() calls return an error or NULL.
Only put a value in the log pointer of kunit_suite and kunit_test if it
is a valid pointer to a log.
This prevents the potential invalid dereference reported by smatch:
lib/kunit/debugfs.c:115 kunit_debugfs_create_suite() error: 'suite->log'
dereferencing possible ERR_PTR()
lib/kunit/debugfs.c:119 kunit_debugfs_create_suite() error: 'test_case->log'
dereferencing possible ERR_PTR()
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 05e2006ce493 ("kunit: Use string_stream for test log") Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device_register() in thermal_zone_device_register_with_trips()
returns an error, the tz variable is set to NULL and subsequently
dereferenced in kfree(tz->tzp).
Commit adc8749b150c ("thermal/drivers/core: Use put_device() if
device_register() fails") added the tz = NULL assignment in question to
avoid a possible double-free after dropping the reference to the zone
device. However, after commit 4649620d9404 ("thermal: core: Make
thermal_zone_device_unregister() return after freeing the zone"), that
assignment has become redundant, because dropping the reference to the
zone device does not cause the zone object to be freed any more.
Drop it to address the NULL pointer dereference.
Fixes: 3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal zone parameters structure") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When both CONFIG_RAS_CEC and CONFIG_ACPI_EXTLOG are enabled, Linux does
not clear the status word of the BIOS supplied error record for corrected
errors. This may prevent logging of subsequent uncorrected errors.
Fix by clearing the status.
Fixes: 23ba710a0864 ("x86/mce: Fix all mce notifiers to update the mce->kflags bitmask") Reported-by: Erwin Tsaur <erwin.tsaur@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.
Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag") Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If SetVariable at runtime is not supported by the firmware we never assign
a callback for that function. At the same time mount the efivarfs as
RO so no one can call that. However, we never check the permission flags
when someone remounts the filesystem as RW. As a result this leads to a
crash looking like this:
$ mount -o remount,rw /sys/firmware/efi/efivars
$ efi-updatevar -f PK.auth PK
Fix this by adding a .reconfigure() function to the fs operations which
we can use to check the requested flags and deny anything that's not RO
if the firmware doesn't implement SetVariable at runtime.
If IPv6 support is disabled at boot (ipv6.disable=1),
the calipso_init() -> netlbl_calipso_ops_register() function isn't called,
and the netlbl_calipso_ops_get() function always returns NULL.
In this case, the netlbl_calipso_add_pass() function allocates memory
for the doi_def variable but doesn't free it with the calipso_doi_free().
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller
Fixes: cb72d38211ea ("netlabel: Initial support for the CALIPSO netlink protocol.") Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
[PM: merged via the LSM tree at Jakub Kicinski request] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak. Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.
Fixes: 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com
[hdegoede@redhat.com: Add missing xa_erase() on error-exit Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If acpi_get_parent() called in acpi_video_dev_register_backlight()
fails, for example, because acpi_ut_acquire_mutex() fails inside
acpi_get_parent), this can lead to incorrect (uninitialized)
acpi_parent handle being passed to acpi_get_pci_dev() for detecting
the parent pci device.
Check acpi_get_parent() result and set parent device only in case of success.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9661e92c10a9 ("acpi: tie ACPI backlight devices to PCI devices if possible") Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Under heavy load it is likely that the controller is done
with its own task but the thread unlocking the wait is not
scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the
controller to respond within allowable timeslice of 1 sec.
fsl,ifc-nand 7e800000.nand: Controller is not responding
[<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a)
[<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c)
[<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c)
[<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0)
Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
ZynqMP GQSPI driver no longer uses spi-master framework. It had been
converted to use spi-mem framework. So remove driver dependency from
spi-master and replace it with spi-mem.
Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1699282435-884917-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Get logical socket id instead of physical id in discover_upi_topology()
to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line
that leads to NULL pointer dereference in upi_fill_topology()
Fixes: f680b6e6062e ("perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server") Reported-by: Kyle Meyer <kyle.meyer@hpe.com> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Kyle Meyer <kyle.meyer@hpe.com> Link: https://lore.kernel.org/r/20231127185246.2371939-2-alexander.antonov@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks.
Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction") Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
rtas_token_to_function() WARNs when passed an invalid token; it's
meant to catch bugs in kernel-based users of RTAS functions. However,
user space controls the token value passed to rtas_token_to_function()
by block_rtas_call(), so user space with sufficient privilege to use
sys_rtas() can trigger the warnings at will:
unexpected failed lookup for token 2048
WARNING: CPU: 20 PID: 2247 at arch/powerpc/kernel/rtas.c:556
rtas_token_to_function+0xfc/0x110
...
NIP rtas_token_to_function+0xfc/0x110
LR rtas_token_to_function+0xf8/0x110
Call Trace:
rtas_token_to_function+0xf8/0x110 (unreliable)
sys_rtas+0x188/0x880
system_call_exception+0x268/0x530
system_call_common+0x160/0x2c4
It's desirable to continue warning on bogus tokens in
rtas_token_to_function(). Currently it is used to look up RTAS
function descriptors when tracing, where we know there has to have
been a successful descriptor lookup by different means already, and it
would be a serious inconsistency for the reverse lookup to fail.
So instead of weakening rtas_token_to_function()'s contract by
removing the warnings, introduce rtas_token_to_function_untrusted(),
which has no opinion on failed lookups. Convert block_rtas_call() and
rtas_token_to_function() to use it.
To access hv-gpci kernel interface files data, the
"Enable Performance Information Collection" option has to be set
in hmc. Incase that option is not set and user try to read
the interface files, it should give error message as
operation not permitted.
Result of accessing added interface files with disabled
performance collection option:
[command]# cat processor_bus_topology
cat: processor_bus_topology: Operation not permitted
[command]# cat processor_config
cat: processor_config: Operation not permitted
[command]# cat affinity_domain_via_domain
cat: affinity_domain_via_domain: Operation not permitted
[command]# cat affinity_domain_via_virtual_processor
cat: affinity_domain_via_virtual_processor: Operation not permitted
[command]# cat affinity_domain_via_partition
Based on above result there is no error message when reading
affinity_domain_via_partition file because of missing
check for failed hcall. Fix this issue by adding
a check in the start of affinity_domain_via_partition_show
function, to return error incase hcall fails, with error type
other then H_PARAMETER.
Fixes: a15e0d6a6929 ("powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via partition information") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231116122033.160964-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The FPU & VMX preemption tests do not check for errors returned by the
low-level asm routines, preempt_fpu() / preempt_vsx() respectively.
That means any register corruption detected by the asm routines does not
result in a test failure.
Fix it by returning the return value of the asm routines from the
pthread child routines.
Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 026728dc5d41 ("KVM: PPC: Book3S HV P9: Inject pending xive
interrupts at guest entry") changed guest entry so that if external
interrupts are enabled, BOOK3S_IRQPRIO_EXTERNAL is not tested for. Test
for this regardless of MSR_EE.
For an L1 host, do not inject an interrupt, but always
use LPCR_MER. If the L0 desires it can inject an interrupt.
Fixes: 026728dc5d41 ("KVM: PPC: Book3S HV P9: Inject pending xive interrupts at guest entry") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[jpn: use kvmpcc_get_msr(), write commit message] Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201132618.555031-7-vaibhav@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
A subtle copy-paste error managed to slip through the reorganisation
of these patches in development, and not only give some HN-F events
the wrong type, but use that wrong type before the subsequent patch
defined it. Too late to fix history, but we can at least fix the bug.
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is
not set). Fixes these build errors:
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system':
ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data'
powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe':
ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver'
Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
intel_idle_irq() re-enables IRQs very early. As a result, an interrupt
may fire before mwait() is eventually called. If such an interrupt queues
a timer, it may go unnoticed until mwait returns and the idle loop
handles the tick re-evaluation. And monitoring TIF_NEED_RESCHED doesn't
help because a local timer enqueue doesn't set that flag.
The issue is mitigated by the fact that this idle handler is only invoked
for shallow C-states when, presumably, the next tick is supposed to be
close enough. There may still be rare cases though when the next tick
is far away and the selected C-state is shallow, resulting in a timer
getting ignored for a while.
Fix this with using sti_mwait() whose IRQ-reenablement only triggers
upon calling mwait(), dealing with the race while keeping the interrupt
latency within acceptable bounds.
Fixes: c227233ad64c (intel_idle: enable interrupts before C1 on Xeons) Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lkml.kernel.org/r/20231115151325.6262-3-frederic@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
When you try to splice between a normal pipe and a notification pipe,
get_pipe_info(..., true) fails, so splice() falls back to treating the
notification pipe like a normal pipe - so we end up in
iter_file_splice_write(), which first locks the input pipe, then calls
vfs_iter_write(), which locks the output pipe.
Lockdep complains about that, because we're taking a pipe lock while
already holding another pipe lock.
I think this probably (?) can't actually lead to deadlocks, since you'd
need another way to nest locking a normal pipe into locking a
watch_queue pipe, but the lockdep annotations don't make that clear.
Bail out earlier in pipe_write() for notification pipes, before taking
the pipe lock.
crtsavres.o is linked to modules. However, as explained in commit d0e628cd817f ("kbuild: doc: clarify the difference between extra-y
and always-y"), 'make modules' does not build extra-y.
For example, the following command fails:
$ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules
[snip]
LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko
ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory
make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1
make[2]: *** [Makefile:1844: modules] Error 2
make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux") Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Apparently the author of this driver expected strncat() to behave the
way that strlcat() does, which uses the size of the destination buffer
as its third argument rather than the length of the source buffer. The
result is that there is no check on the size of the allocated buffer.
Change it to strlcat().
[ bp: Trim compiler output, fixup commit message. ]
AMD systems generally allow MCA "simulation" where MCA registers can be
written with valid data and the full MCA handling flow can be tested by
software.
However, the platform on Scalable MCA systems, can prevent software from
writing data to the MCA registers. There is no architectural way to
determine this configuration. Therefore, the MCE injection module will
check for this behavior by writing and reading back a test status value.
This is done during module init, and the check can run on any CPU with
any valid MCA bank.
If MCA_STATUS writes are ignored by the platform, then there are no side
effects on the hardware state.
If the writes are not ignored, then the test status value will remain in
the hardware MCA_STATUS register. It is likely that the value will not
be overwritten by hardware or software, since the tested CPU and bank
are arbitrary. Therefore, the user may see a spurious, synthetic MCA
error reported whenever MCA is polled for this CPU.
Clear the test value immediately after writing it. It is very unlikely
that a valid MCA error is logged by hardware during the test. Errors
that cause an #MC won't be affected.
tl;dr: The num_digits() function has a theoretical overflow issue.
But it doesn't affect any actual in-tree users. Fix it by using
a larger type for one of the local variables.
Long version:
There is an overflow in variable m in function num_digits when val
is >= 1410065408 which leads to the digit calculation loop to
iterate more times than required. This results in either more
digits being counted or in some cases (for example where val is 1932683193) the value of m eventually overflows to zero and the
while loop spins forever).
Currently the function num_digits is currently only being used for
small values of val in the SMP boot stage for digit counting on the
number of cpus and NUMA nodes, so the overflow is never encountered.
However it is useful to fix the overflow issue in case the function
is used for other purposes in the future. (The issue was discovered
while investigating the digit counting performance in various
kernel helper functions rather than any real-world use-case).
The simplest fix is to make m a long long, the overhead in
multiplication speed for a long long is very minor for small values
of val less than 10000 on modern processors. The alternative
fix is to replace the multiplication with a constant division
by 10 loop (this compiles down to an multiplication and shift)
without needing to make m a long long, but this is slightly slower
than the fix in this commit when measured on a range of x86
processors).
[ dhansen: subject and changelog tweaks ]
Fixes: 646e29a1789a ("x86: Improve the printout of the SMP bootup CPU table") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/20240110140127.241451-1-sumanthk@linux.ibm.com Fixes: 2d1f649c7c08 ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel-feat directive passes its argument straight to the shell.
This is unfortunate and unnecessary.
Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).
This also makes the code shorter.
This is analogous to commit 3231dd586277 ("docs: kernel_abi.py: fix
command injection") where we did exactly the same thing for
kernel_abi.py, somehow I completely missed this one.
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
CCITMIN is a 12 bit field and doesn't fit in a u8, so extend it to u16.
This probably wasn't an issue previously because values higher than 255
never occurred.
But since commit 4aff040bcc8d ("coresight: etm: Override TRCIDR3.CCITMIN
on errata affected cpus"), a comparison with 256 was done to enable the
errata, generating the following W=1 build error:
coresight-etm4x-core.c:1188:24: error: result of comparison of
constant 256 with expression of type 'u8' (aka 'unsigned char') is
always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (drvdata->ccitmin == 256)
Cc: stable@vger.kernel.org Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310302043.as36UFED-lkp@intel.com/ Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20231101115206.70810-1-james.clark@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ttyname buffer for the ledtrig_tty_data struct is allocated in the
sysfs ttyname_store() function. This buffer must be released on trigger
deactivation. This was missing and is thus a memory leak.
While we are at it, the TTY handler in the ledtrig_tty_data struct should
also be returned in case of the trigger deactivation call.
Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.
In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
freed.
To address this issue, we can get idev atomic & inc idev reference with
minor_lock.
Fixes: 57c5f4df0a5a ("uio: fix crash after the device is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmap read lock is used during the shrinker's callback, which means
that using alloc->vma pointer isn't safe as it can race with munmap().
As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap") the mmap lock is downgraded after the vma has been isolated.
I was able to reproduce this issue by manually adding some delays and
triggering page reclaiming through the shrinker's debug sysfs. The
following KASAN report confirms the UAF:
==================================================================
BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8
Read of size 8 at addr ffff356ed50e50f0 by task bash/478
Freed by task 491:
kmem_cache_free+0x17c/0x3c8
vm_area_free_rcu_cb+0x74/0x98
rcu_core+0xa38/0x26d4
rcu_core_si+0x10/0x1c
__do_softirq+0x2fc/0xd24
Last potentially related work creation:
__call_rcu_common.constprop.0+0x6c/0xba0
call_rcu+0x10/0x1c
vm_area_free+0x18/0x24
remove_vma+0xe4/0x118
do_vmi_align_munmap.isra.0+0x718/0xb5c
do_vmi_munmap+0xdc/0x1fc
__vm_munmap+0x10c/0x278
__arm64_sys_munmap+0x58/0x7c
Fix this issue by performing instead a vma_lookup() which will fail to
find the vma that was isolated before the mmap lock downgrade. Note that
this option has better performance than upgrading to a mmap write lock
which would increase contention. Plus, mmap_write_trylock() has been
recently removed anyway.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Cc: stable@vger.kernel.org Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use EPOLLERR instead of POLLERR to make sure it is cast to the correct
__poll_t type. This fixes the following sparse issue:
drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types)
drivers/android/binder.c:5030:24: expected restricted __poll_t
drivers/android/binder.c:5030:24: got int
Fixes: f88982679f54 ("binder: check for binder_thread allocation failure in binder_poll()") Cc: stable@vger.kernel.org Cc: Eric Biggers <ebiggers@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That commit introduced the following race and can cause system hung.
md_write_start: raid5d:
// mddev->in_sync == 1
set "MD_SB_CHANGE_PENDING"
// running before md_write_start wakeup it
waiting "MD_SB_CHANGE_PENDING" cleared
>>>>>>>>> hung
wakeup mddev->thread
...
waiting "MD_SB_CHANGE_PENDING" cleared
>>>> hung, raid5d should clear this flag
but get hung by same flag.
The issue reverted commit fixing is fixed by last patch in a new way.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ppace array is not freed if one of the init_acl_state() calls inside
parse_dacl() fails. At the moment the function may fail only due to the
memory allocation errors so it's highly unlikely in this case but
nevertheless a fix is needed.
Move ppace allocation after the init_acl_state() calls with proper error
handling.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When file is changed using notepad on read-only share(read_only = yes in
ksmbd.conf), There is a problem where existing data is truncated.
notepad in windows try to O_TRUNC open(FILE_OVERWRITE_IF) and all data
in file is truncated. This patch don't allow O_TRUNC open on read-only
share and add KSMBD_TREE_CONN_FLAG_WRITABLE check in smb2_set_info().
Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work,
is also sold as the Eluktronics RP-15 which does not use the standard
TongFang GMxXGxx DMI board_name.
Add an entry for this laptop to the irq1_edge_low_force_override[] DMI
table to make the internal keyboard functional.
Reported-by: Luis Acuna <ldacuna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds overrides for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
This enables the mute and mic-mute LEDs on the HP Envy X360 13-ay0xxx
convertibles.
The quirk 'ALC245_FIXUP_HP_X360_MUTE_LEDS' already exists and is now
enabled for this device.
Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip
on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are
16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids).
Some laptops without _DSD have the SPI speed set very low in the BIOS.
Since the SPI controller uses this speed as its max speed, the SPI
transactions are very slow. Firmware download writes to many registers,
and if the SPI speed is too slow, it can take a long time to download.
For this reason, disable firmware loading if the maximum SPI speed is
too low. Without Firmware, audio playback will work, but the volume
will be low to ensure safe operation of the CS35L41.
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Linus Torvalds [Sat, 6 Jan 2024 19:35:37 +0000 (11:35 -0800)]
Merge tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Improve the detection when to run atomic transfer handlers for kernels
with preemption disabled. This removes some false positive splats a
number of users were seeing if their driver didn't have support for
atomic transfers.
Also, fix a typo in the docs while we are here"
* tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Fix atomic xfer check for non-preempt config
Documentation/i2c: fix spelling error in i2c-address-translators
Benjamin Bara [Thu, 4 Jan 2024 08:17:08 +0000 (09:17 +0100)]
i2c: core: Fix atomic xfer check for non-preempt config
Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.
During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:
[ 12.687169] No atomic I2C transfer handler for 'i2c-0'
[ 12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...
Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.
Linus Torvalds [Fri, 5 Jan 2024 21:46:18 +0000 (13:46 -0800)]
Merge tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
Linus Torvalds [Fri, 5 Jan 2024 20:26:26 +0000 (12:26 -0800)]
Merge tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to suppress unexpected system reboot in AMD Ryzen
machines with PCIe card consisting of Asmedia ASM1083/1085 and
VT6306/6307/6308.
When the 1394 OHCI driver for the card accesses a specific register
in PCI memory space, the system reboot often occurs.
The issue affects all versions of Linux kernel as long as the 1394
OHCI driver is included. The mechanism of unexpected system reboot is
not clear, so the driver is changed to avoid the access itself when
detecting the combination of hardware"
* tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
Linus Torvalds [Fri, 5 Jan 2024 20:02:20 +0000 (12:02 -0800)]
Merge tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"The amdgpu ones are fairly normal, the one that is a bit large is a
fix for a newly introduced IP in 6.7 so unlikely to cause regressions.
The nouveau ones are mostly memory leaks and debugging cleanups from
the GSP (new nvidia firmware) enablement. There are some GSP changes
to the message passing code and a subsequent fix for eDP panel turn
on, that means my laptop can turn on the panel in GSP mode. These are
fairly low chance of disrupting things since GSP is new in 6.7. The
final not all in GSP fix is a deadlock seen with i915/nouveau when GSP
is used where the the fence and irq paths have locking inversions,
I've pushed some irq enablement out to a workqueue, and this has seen
some fairly decent testing.
amdgpu:
- DP MST fix
- SMU 13.0.6 fixes
- fix displays on macbooks using vega12
- fix VSC and colorimetry on DP/eDP
nouveau:
- fix deadlock between fence signalling and irq paths
- fix GSP memory leaks
- fix GSP leftover debug
- hide some GSP callback messages
- fix GSP display disable path
- fix GSP ACPI interaction
- handle errors in ctrl messages
- use errors info to fix DP link training"
* tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/dp: Honor GSP link training retry timeouts
nouveau: push event block/allowing out of the fence context
nouveau/gsp: always free the alloc messages on r535
nouveau/gsp: don't free ctrl messages on errors
nouveau/gsp: convert gsp errors to generic errors
drm/nouveau/gsp: Fix ACPI MXDM/MXDS method invocations
nouveau/gsp: free userd allocation.
nouveau/gsp: free acpi object after use
nouveau: fix disp disabling with GSP
nouveau/gsp: drop some acpi related debug
nouveau/gsp: add three notifier callbacks that we see in normal operation (v2)
drm/amd/pm: Use gpu_metrics_v1_5 for SMUv13.0.6
drm/amd/pm: Add gpu_metrics_v1_5
drm/amd/pm: Add mem_busy_percent for GCv9.4.3 apu
drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR
drm/amdgpu: skip gpu_info fw loading on navi12
drm/amd/display: add nv12 bounding box
drm/amd/pm: Update metric table for jpeg/vcn data
drm/amd/pm: Use separate metric table for APU
drm/amd/display: pbn_div need be updated for hotplug event
Tetsuo Handa [Wed, 3 Jan 2024 01:52:22 +0000 (10:52 +0900)]
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
syzbot is reporting uninit-value at shrinker_alloc(), for commit 307bececcd12 ("mm: shrinker: add a secondary array for
shrinker_info::{map, nr_deferred}") which assumed that the ->unit was
allocated with __GFP_ZERO forgot to replace kvmalloc_node() in
expand_one_shrinker_info() with kvzalloc_node().
Link: https://lkml.kernel.org/r/9226cc0a-10e0-4489-80c5-58c3b5b4359c@I-love.SAKURA.ne.jp Reported-by: syzbot <syzbot+1e0ed05798af62917464@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=1e0ed05798af62917464 Fixes: 307bececcd12 ("mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Fri, 5 Jan 2024 17:07:59 +0000 (09:07 -0800)]
Merge tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes/x86 fix from Masami Hiramatsu:
- Fix to emulate indirect call which size is not 5 byte.
Current code expects the indirect call instructions are 5 bytes, but
that is incorrect. Usually indirect call based on register is shorter
than that, thus the emulation causes a kernel crash by accessing
wrong instruction boundary. This uses the instruction size to
calculate the return address correctly.
* tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect
Linus Torvalds [Fri, 5 Jan 2024 16:52:25 +0000 (08:52 -0800)]
Merge tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three important multichannel smb3 client fixes found in recent
testing:
- fix oops due to incorrect refcounting of interfaces after
disabling multichannel
- fix possible unrecoverable session state after disabling
multichannel with active sessions
- fix two places that were missing use of chan_lock"
* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not depend on release_iface for maintaining iface_list
cifs: cifs_chan_is_iface_active should be called with chan_lock held
cifs: after disabling multichannel, mark tcon for reconnect
firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards
VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).
The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.
This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.
Jeff Layton [Wed, 3 Jan 2024 13:36:52 +0000 (08:36 -0500)]
nfsd: drop the nfsd_put helper
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()") Reported-by: Zhi Li <yieli@redhat.com> Cc: NeilBrown <neilb@suse.de> Signed-off-by: Jeffrey Layton <jlayton@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Lyude Paul [Fri, 22 Dec 2023 04:32:00 +0000 (14:32 +1000)]
drm/nouveau/dp: Honor GSP link training retry timeouts
Turns out that one of the ways that Nvidia's driver handles the pre-LT
timeout for eDP panels is by providing a retry timeout in their link
training callbacks that we're expected to wait for. Up until now we didn't
pay any attention to this parameter.
So, start honoring the timeout if link training fails - and retry up to 3
times. The "3 times" bit comes from OpenRM's link training code.
[airlied: this fixes the panel on one of my laptops]
projects / thirdparty / kernel / stable.git / log
