Jonas Gorski [Sun, 2 Nov 2025 10:07:56 +0000 (11:07 +0100)]
net: dsa: b53: fix enabling ip multicast
In the New Control register bit 1 is either reserved, or has a different
function:
Out of Range Error Discard
When enabled, the ingress port discards any frames
if the Length field is between 1500 and 1536
(excluding 1500 and 1536) and with good CRC.
The actual bit for enabling IP multicast is bit 0, which was only
explicitly enabled for BCM5325 so far.
For older switch chips, this bit defaults to 0, so we want to enable it
as well, while newer switch chips default to 1, and their documentation
says "It is illegal to set this bit to zero."
So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit
also for other switch chips. While at it, rename it to (B53_)IP_MC as
that is how it is called in Broadcom code.
====================
net: dsa: b53: fix bcm63xx rgmii user ports with speed < 1g
It seems that the integrated switch in bcm63xx does not support polling
external PHYs for link configuration. While the appropriate registers
seem to exist with expected content, changing them does nothing.
This results in user ports with external PHYs only working in 1000/fd,
and not in other modes, despite linking up.
Fix this by writing the link result into the port state override
register, like we already do for fixed links.
With this, ports with lower speeds can successfully transmit and receive
packets.
This also aligns the behaviour with the old bcm63xx_enetsw driver for
those ports.
====================
Jonas Gorski [Sat, 1 Nov 2025 13:28:06 +0000 (14:28 +0100)]
net: dsa: b53: fix resetting speed and pause on forced link
There is no guarantee that the port state override registers have their
default values, as not all switches support being reset via register or
have a reset GPIO.
So when forcing port config, we need to make sure to clear all fields,
which we currently do not do for the speed and flow control
configuration. This can cause flow control stay enabled, or in the case
of speed becoming an illegal value, e.g. configured for 1G (0x2), then
setting 100M (0x1), results in 0x3 which is invalid.
For PORT_OVERRIDE_SPEED_2000M we need to make sure to only clear it on
supported chips, as the bit can have different meanings on other chips,
e.g. for BCM5389 this controls scanning PHYs for link/speed
configuration.
Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20251101132807.50419-2-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alok Tiwari [Fri, 31 Oct 2025 16:15:53 +0000 (09:15 -0700)]
net: mdio: Check regmap pointer returned by device_node_to_regmap()
The call to device_node_to_regmap() in airoha_mdio_probe() can return
an ERR_PTR() if regmap initialization fails. Currently, the driver
stores the pointer without validation, which could lead to a crash
if it is later dereferenced.
Add an IS_ERR() check and return the corresponding error code to make
the probe path more robust.
Fixes: 67e3ba978361 ("net: mdio: Add MDIO bus controller for Airoha AN7583") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251031161607.58581-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netconsole: Acquire su_mutex before navigating configs hierarchy
There is a race between operations that iterate over the userdata
cg_children list and concurrent add/remove of userdata items through
configfs. The update_userdata() function iterates over the
nt->userdata_group.cg_children list, and count_extradata_entries() also
iterates over this same list to count nodes.
Quoting from Documentation/filesystems/configfs.rst:
> A subsystem can navigate the cg_children list and the ci_parent pointer
> to see the tree created by the subsystem. This can race with configfs'
> management of the hierarchy, so configfs uses the subsystem mutex to
> protect modifications. Whenever a subsystem wants to navigate the
> hierarchy, it must do so under the protection of the subsystem
> mutex.
Without proper locking, if a userdata item is added or removed
concurrently while these functions are iterating, the list can be
accessed in an inconsistent state. For example, the list_for_each() loop
can reach a node that is being removed from the list by list_del_init()
which sets the nodes' .next pointer to point to itself, so the loop will
never end (or reach the WARN_ON_ONCE in update_userdata() ).
Fix this by holding the configfs subsystem mutex (su_mutex) during all
operations that iterate over cg_children.
This includes:
- userdatum_value_store() which calls update_userdata() to iterate over
cg_children
- All sysdata_*_enabled_store() functions which call
count_extradata_entries() to iterate over cg_children
The su_mutex must be acquired before dynamic_netconsole_mutex to avoid
potential lock ordering issues, as configfs operations may already hold
su_mutex when calling into our code.
Hangbin Liu [Thu, 30 Oct 2025 07:35:39 +0000 (07:35 +0000)]
net: vlan: sync VLAN features with lower device
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Wang Liang [Thu, 30 Oct 2025 04:03:40 +0000 (12:03 +0800)]
selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Abdun Nihaal [Thu, 30 Oct 2025 04:25:22 +0000 (09:55 +0530)]
isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe()
In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when
setup_instance() fails with an error code. Fix that by freeing the urb
before freeing the hw structure. Also change the error paths to use the
goto ladder style.
Compile tested only. Issue found using a prototype static analysis tool.
Anubhav Singh [Thu, 30 Oct 2025 06:04:36 +0000 (06:04 +0000)]
selftests/net: use destination options instead of hop-by-hop
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Anubhav Singh [Thu, 30 Oct 2025 06:28:18 +0000 (06:28 +0000)]
selftests/net: fix out-of-order delivery of FIN in gro:tcp test
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Jonas Gorski [Mon, 27 Oct 2025 19:46:21 +0000 (20:46 +0100)]
net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bbaa5 ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Carolina Jubran [Wed, 29 Oct 2025 08:38:13 +0000 (10:38 +0200)]
ptp: Allow exposing cycles only for clocks with free-running counter
The PTP core falls back to gettimex64 and getcrosststamp when
getcycles64 or getcyclesx64 are not implemented. This causes the CYCLES
ioctls to retrieve PHC real time instead of free-running cycles.
Reject PTP_SYS_OFFSET_{PRECISE,EXTENDED}_CYCLES for clocks without
free-running counter support since the result would represent PHC real
time and system time rather than cycles and system time.
====================
gve: Fix NULL dereferencing with PTP clock
This patch series fixes NULL dereferences that are possible with gve's
PTP clock due to not stubbing certain ptp_clock_info callbacks.
====================
Tim Hostetler [Wed, 29 Oct 2025 18:45:39 +0000 (11:45 -0700)]
gve: Implement gettimex64 with -EOPNOTSUPP
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing.
Jakub Kicinski [Fri, 31 Oct 2025 19:33:07 +0000 (12:33 -0700)]
Merge tag 'for-net-2025-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
- MGMT: Fix OOB access in parse_adv_monitor_pattern()
- hci_event: validate skb length for unknown CC opcode
* tag 'for-net-2025-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern()
Bluetooth: btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
Bluetooth: hci_event: validate skb length for unknown CC opcode
====================
Jakub Kicinski [Fri, 31 Oct 2025 19:30:32 +0000 (12:30 -0700)]
Merge tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of new fixes:
- ath10k: revert a patch that had caused issues on some devices
- cfg80211/mac80211: use hrtimers for some things where the
precise timing matters
- zd1211rw: fix a long-standing potential leak
* tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: zd1211rw: fix potential memory leak in __zd_usb_enable_rx()
wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work
wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work
wifi: mac80211: use wiphy_hrtimer_work for ttlm_work
wifi: cfg80211: add an hrtimer based delayed work item
Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
====================
Ilia Gavrilov [Mon, 20 Oct 2025 15:12:55 +0000 (15:12 +0000)]
Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern()
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7d4 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_event: validate skb length for unknown CC opcode
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24 Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com Fixes: afcb3369f46ed ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling") Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ranganath V N [Sun, 26 Oct 2025 16:33:12 +0000 (22:03 +0530)]
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
Fix an issue detected by syzbot:
KMSAN reported an uninitialized-value access in sctp_inq_pop
BUG: KMSAN: uninit-value in sctp_inq_pop
The issue is actually caused by skb trimming via sk_filter() in sctp_rcv().
In the reproducer, skb->len becomes 1 after sk_filter(), which bypassed the
original check:
if (skb->len < sizeof(struct sctphdr) + sizeof(struct sctp_chunkhdr) +
skb_transport_offset(skb))
To handle this safely, a new check should be performed after sk_filter().
Reported-by: syzbot+d101e12bccd4095460e7@syzkaller.appspotmail.com Tested-by: syzbot+d101e12bccd4095460e7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d101e12bccd4095460e7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Ranganath V N <vnranganath.20@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251026-kmsan_fix-v3-1-2634a409fa5f@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shivaji Kant [Wed, 29 Oct 2025 06:54:19 +0000 (06:54 +0000)]
net: devmem: refresh devmem TX dst in case of route invalidation
The zero-copy Device Memory (Devmem) transmit path
relies on the socket's route cache (`dst_entry`) to
validate that the packet is being sent via the network
device to which the DMA buffer was bound.
However, this check incorrectly fails and returns `-ENODEV`
if the socket's route cache entry (`dst`) is merely missing
or expired (`dst == NULL`). This scenario is observed during
network events, such as when flow steering rules are deleted,
leading to a temporary route cache invalidation.
This patch fixes -ENODEV error for `net_devmem_get_binding()`
by doing the following:
1. It attempts to rebuild the route via `rebuild_header()`
if the route is initially missing (`dst == NULL`). This
allows the TCP/IP stack to recover from transient route
cache misses.
2. It uses `rcu_read_lock()` and `dst_dev_rcu()` to safely
access the network device pointer (`dst_dev`) from the
route, preventing use-after-free conditions if the
device is concurrently removed.
3. It maintains the critical safety check by validating
that the retrieved destination device (`dst_dev`) is
exactly the device registered in the Devmem binding
(`binding->dev`).
These changes prevent unnecessary ENODEV failures while
maintaining the critical safety requirement that the
Devmem resources are only used on the bound network device.
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: Vedant Mathur <vedantmathur@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Shivaji Kant <shivajikant@google.com> Link: https://patch.msgid.link/20251029065420.3489943-1-shivajikant@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: stmmac: Fixes for stmmac Tx VLAN insert and EST
This patchset includes following fixes for stmmac Tx VLAN insert and
EST implementations:
1. Disable STAG insertion offloading, as DWMAC IPs doesn't support
offload of STAG for double VLAN packets and CTAG for single VLAN
packets when using the same register configuration. The current
configuration in the driver is undocumented and is adding an
additional 802.1Q tag with VLAN ID 0 for double VLAN packets.
2. Consider Tx VLAN offload tag length for maxSDU estimation.
3. Fix GCL bounds check
====================
Rohan G Thomas [Tue, 28 Oct 2025 03:18:45 +0000 (11:18 +0800)]
net: stmmac: est: Fix GCL bounds checks
Fix the bounds checks for the hw supported maximum GCL entry
count and gate interval time.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-3-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rohan G Thomas [Tue, 28 Oct 2025 03:18:44 +0000 (11:18 +0800)]
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
Queue maxSDU requirement of 802.1 Qbv standard requires mac to drop
packets that exceeds maxSDU length and maxSDU doesn't include
preamble, destination and source address, or FCS but includes
ethernet type and VLAN header.
On hardware with Tx VLAN offload enabled, VLAN header length is not
included in the skb->len, when Tx VLAN offload is requested. This
leads to incorrect length checks and allows transmission of
oversized packets. Add the VLAN_HLEN to the skb->len before checking
the Qbv maxSDU if Tx VLAN offload is requested for the packet.
Fixes: c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-2-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rohan G Thomas [Tue, 28 Oct 2025 03:18:43 +0000 (11:18 +0800)]
net: stmmac: vlan: Disable 802.1AD tag insertion offload
The DWMAC IP's VLAN tag insertion offload does not support inserting
STAG (802.1AD) and CTAG (802.1Q) types in bytes 13 and 14 using the
same MAC_VLAN_Incl and MAC_VLAN_Inner_Incl register configurations.
Currently, MAC_VLAN_Incl is configured to offload only STAG type
insertion. However, the DWMAC IP inserts a CTAG type when the inner
VLAN ID field of the descriptor is not configured, and a STAG type
when it is configured. This behavior is not documented and leads to
inconsistent double VLAN tagging.
Additionally, an unexpected CTAG with VLAN ID 0 is inserted, resulting
in frames like:
Frame 1: 110 bytes on wire (880 bits), 110 bytes captured (880 bits)
Ethernet II, Src: <src> (<src>), Dst: <dst> (<dst>)
IEEE 802.1ad, ID: 100
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 0 (unexpected)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
Internet Protocol Version 4, Src: 192.168.4.10, Dst: 192.168.4.11
Internet Control Message Protocol
To avoid this undocumented and incorrect behavior, disable 802.1AD tag
insertion offload. Also, don't set CSVL bit. As per the data book,
when this bit is set, S-VLAN type (0x88A8) is inserted in the 13th and
14th bytes of transmitted packets and when this bit is reset, C-VLAN
type (0x8100) is inserted in the 13th and 14th bytes of transmitted
packets.
Fixes: 30d932279dc2 ("net: stmmac: Add support for VLAN Insertion Offload") Fixes: e94e3f3b51ce ("net: stmmac: Add support for VLAN Insertion Offload in GMAC4+") Fixes: 1d2c7a5fee31 ("net: stmmac: Refactor VLAN implementation") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Boon Khai Ng <boon.khai.ng@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-1-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
tls: Introduce and use RX async resync request cancel function
This series by Shahar introduces RX async resync request cancel function
in tls module, and uses it in mlx5e driver.
For a device-offloaded TLS RX connection, the TLS module increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request. In the meanwhile, the device is
queried and is expected to respond, asynchronously.
However, if the device response is delayed or fails (e.g due to unstable
connection and device getting out of tracking, hardware errors, resource
exhaustion etc.), the TLS module keeps logging and incrementing
rcd_delta, which can lead to a WARN() when rcd_delta exceeds the
threshold.
This series improves this code area by canceling the resync request when
spotting an issue with the device response.
====================
Shahar Shitrit [Sun, 26 Oct 2025 20:03:03 +0000 (22:03 +0200)]
net/mlx5e: kTLS, Cancel RX async resync request in error flows
When device loses track of TLS records, it attempts to resync by
monitoring records and requests an asynchronous resynchronization
from software for this TLS connection.
The TLS module handles such device RX resync requests by logging record
headers and comparing them with the record tcp_sn when provided by the
device. It also increments rcd_delta to track how far the current
record tcp_sn is from the tcp_sn of the original resync request.
If the device later responds with a matching tcp_sn, the TLS module
approves the tcp_sn for resync.
However, the device response may be delayed or never arrive,
particularly due to traffic-related issues such as packet drops or
reordering. In such cases, the TLS module remains unaware that resync
will not complete, and continues performing unnecessary work by logging
headers and incrementing rcd_delta, which can eventually exceed the
threshold and trigger a WARN(). For example, this was observed when the
device got out of tracking, causing
mlx5e_ktls_handle_get_psv_completion() to fail and ultimately leading
to the rcd_delta warning.
To address this, call tls_offload_rx_resync_async_request_cancel()
to cancel the resync request and stop resync tracking in such error
cases. Also, increment the tls_resync_req_skip counter to track these
cancellations.
Shahar Shitrit [Sun, 26 Oct 2025 20:03:02 +0000 (22:03 +0200)]
net: tls: Cancel RX async resync request on rcd_delta overflow
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Shahar Shitrit [Sun, 26 Oct 2025 20:03:01 +0000 (22:03 +0200)]
net: tls: Change async resync helpers argument
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Jakub Kicinski [Thu, 30 Oct 2025 01:25:12 +0000 (18:25 -0700)]
Merge tag 'nf-25-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) its not possible to attach conntrack labels via ctnetlink
unless one creates a dummy 'ct labels set' rule in nftables.
This is an oversight, the 'ruleset tests presence, userspace
(netlink) sets' use-case is valid and should 'just work'.
Always broken since this got added in Linux 4.7.
2) nft_connlimit reads count value without holding the relevant
lock, add a READ_ONCE annotation. From Fernando Fernandez Mancera.
3) There is a long-standing bug (since 4.12) in nftables helper infra
when NAT is in use: if the helper gets assigned after the nat binding
was set up, we fail to initialise the 'seqadj' extension, which is
needed in case NAT payload rewrites need to add (or remove) from the
packet payload. Fix from Andrii Melnychenko.
* tag 'nf-25-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: add seqadj extension for natted connections
netfilter: nft_connlimit: fix possible data race on connection count
netfilter: nft_ct: enable labels for get case too
====================
Thanh Quan [Mon, 27 Oct 2025 14:02:43 +0000 (15:02 +0100)]
net: phy: dp83869: fix STRAP_OPMODE bitmask
According to the TI DP83869HM datasheet Revision D (June 2025), section
7.6.1.41 STRAP_STS Register, the STRAP_OPMODE bitmask is bit [11:9].
Fix this.
In case the PHY is auto-detected via PHY ID registers, or not described
in DT, or, in case the PHY is described in DT but the optional DT property
"ti,op-mode" is not present, then the driver reads out the PHY functional
mode (RGMII, SGMII, ...) from hardware straps.
Currently, all upstream users of this PHY specify both DT compatible string
"ethernet-phy-id2000.a0f1" and ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>
property, therefore it seems no upstream users are affected by this bug.
The driver currently interprets bits [2:0] of STRAP_STS register as PHY
functional mode. Those bits are controlled by ANEG_DIS, ANEGSEL_0 straps
and an always-zero reserved bit. Systems that use RGMII-to-Copper functional
mode are unlikely to disable auto-negotiation via ANEG_DIS strap, or change
auto-negotiation behavior via ANEGSEL_0 strap. Therefore, even with this bug
in place, the STRAP_STS register content is likely going to be interpreted
by the driver as RGMII-to-Copper mode.
However, for a system with PHY functional mode strapping set to other mode
than RGMII-to-Copper, the driver is likely to misinterpret the strapping
as RGMII-to-Copper and misconfigure the PHY.
For example, on a system with SGMII-to-Copper strapping, the STRAP_STS
register reads as 0x0c20, but the PHY ends up being configured for
incompatible RGMII-to-Copper mode.
Fixes: 0eaf8ccf2047 ("net: phy: dp83869: Set opmode from straps") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Port from U-Boot to Linux Link: https://patch.msgid.link/20251027140320.8996-1-marek.vasut+renesas@mailbox.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Po-Hsu Lin [Mon, 27 Oct 2025 09:57:10 +0000 (17:57 +0800)]
selftests: net: use BASH for bareudp testing
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Jinliang Wang [Mon, 27 Oct 2025 06:55:30 +0000 (23:55 -0700)]
net: mctp: Fix tx queue stall
The tx queue can become permanently stuck in a stopped state due to a
race condition between the URB submission path and its completion
callback.
The URB completion callback can run immediately after usb_submit_urb()
returns, before the submitting function calls netif_stop_queue(). If
this occurs, the queue state management becomes desynchronized, leading
to a stall where the queue is never woken.
Fix this by moving the netif_stop_queue() call to before submitting the
URB. This closes the race window by ensuring the network stack is aware
the queue is stopped before the URB completion can possibly run.
Fixes: 0791c0327a6e ("net: mctp: Add MCTP USB transport driver") Signed-off-by: Jinliang Wang <jinliangw@google.com> Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://patch.msgid.link/20251027065530.2045724-1-jinliangw@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cosmin Ratiu [Sun, 26 Oct 2025 20:20:19 +0000 (22:20 +0200)]
net/mlx5: Don't zero user_count when destroying FDB tables
esw->user_count tracks how many TC rules are added on an esw via
mlx5e_configure_flower -> mlx5_esw_get -> atomic64_inc(&esw->user_count)
esw.user_count was unconditionally set to 0 in
esw_destroy_legacy_fdb_table and esw_destroy_offloads_fdb_tables.
These two together can lead to the following sequence of events:
1. echo 1 > /sys/class/net/eth2/device/sriov_numvfs
- mlx5_core_sriov_configure -...-> esw_create_legacy_table ->
atomic64_set(&esw->user_count, 0)
2. tc qdisc add dev eth2 ingress && \
tc filter replace dev eth2 pref 1 protocol ip chain 0 ingress \
handle 1 flower action ct nat zone 64000 pipe
- mlx5e_configure_flower -> mlx5_esw_get ->
atomic64_inc(&esw->user_count)
3. echo 0 > /sys/class/net/eth2/device/sriov_numvfs
- mlx5_core_sriov_configure -..-> esw_destroy_legacy_fdb_table
-> atomic64_set(&esw->user_count, 0)
4. devlink dev eswitch set pci/0000:08:00.0 mode switchdev
- mlx5_devlink_eswitch_mode_set -> mlx5_esw_try_lock ->
atomic64_read(&esw->user_count) == 0
- then proceed to a WARN_ON in:
esw_offloads_start -> mlx5_eswitch_enable_locke -> esw_offloads_enable
-> mlx5_esw_offloads_rep_load -> mlx5e_vport_rep_load ->
mlx5e_netdev_change_profile -> mlx5e_detach_netdev ->
mlx5e_cleanup_nic_rx -> mlx5e_tc_nic_cleanup ->
mlx5e_mod_hdr_tbl_destroy
Fix this by not clearing out the user_count when destroying FDB tables,
so that the check in mlx5_esw_try_lock can prevent the mode change when
there are TC rules configured, as originally intended.
Miaoqian Lin [Sun, 26 Oct 2025 16:43:16 +0000 (00:43 +0800)]
net: usb: asix_devices: Check return value of usbnet_get_endpoints
The code did not check the return value of usbnet_get_endpoints.
Add checks and return the error if it fails to transfer the error.
Found via static anlaysis and this is similar to
commit 07161b2416f7 ("sr9800: Add check for usbnet_get_endpoints").
Fixes: 933a27d39e0e ("USB: asix - Add AX88178 support and many other changes") Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 30 Oct 2025 00:44:30 +0000 (17:44 -0700)]
Merge branch 'mptcp-various-rare-sending-issues'
Matthieu Baerts says:
====================
mptcp: various rare sending issues
Here are various fixes from Paolo, addressing very occasional issues on
the sending side:
- Patch 1: drop an optimisation that could lead to timeout in case of
race conditions. A fix for up to v5.11.
- Patch 2: fix stream corruption under very specific conditions.
A fix for up to v5.13.
- Patch 3: restore MPTCP-level zero window probe after a recent fix.
A fix for up to v5.16.
- Patch 4: new MIB counter to track MPTCP-level zero windows probe to
help catching issues similar to the one fixed by the previous patch.
====================
Paolo Abeni [Tue, 28 Oct 2025 08:16:54 +0000 (09:16 +0100)]
mptcp: restore window probe
Since commit 72377ab2d671 ("mptcp: more conservative check for zero
probes") the MPTCP-level zero window probe check is always disabled, as
the TCP-level write queue always contains at least the newly allocated
skb.
Refine the relevant check tacking in account that the above condition
and that such skb can have zero length.
Fixes: 72377ab2d671 ("mptcp: more conservative check for zero probes") Cc: stable@vger.kernel.org Reported-by: Geliang Tang <geliang@kernel.org> Closes: https://lore.kernel.org/d0a814c364e744ca6b836ccd5b6e9146882e8d42.camel@kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-3-38ffff5a9ec8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Oct 2025 08:16:53 +0000 (09:16 +0100)]
mptcp: fix MSG_PEEK stream corruption
If a MSG_PEEK | MSG_WAITALL read operation consumes all the bytes in the
receive queue and recvmsg() need to waits for more data - i.e. it's a
blocking one - upon arrival of the next packet the MPTCP protocol will
start again copying the oldest data present in the receive queue,
corrupting the data stream.
Address the issue explicitly tracking the peeked sequence number,
restarting from the last peeked byte.
Paolo Abeni [Tue, 28 Oct 2025 08:16:52 +0000 (09:16 +0100)]
mptcp: drop bogus optimization in __mptcp_check_push()
Accessing the transmit queue without owning the msk socket lock is
inherently racy, hence __mptcp_check_push() could actually quit early
even when there is pending data.
That in turn could cause unexpected tx lock and timeout.
Dropping the early check avoids the race, implicitly relaying on later
tests under the relevant lock. With such change, all the other
mptcp_send_head() call sites are now under the msk socket lock and we
can additionally drop the now unneeded annotation on the transmit head
pointer accesses.
Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Geliang Tang <geliang@kernel.org> Tested-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-1-38ffff5a9ec8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netconsole: Fix race condition in between reader and writer of userdata
The update_userdata() function constructs the complete userdata string
in nt->extradata_complete and updates nt->userdata_length. This data
is then read by write_msg() and write_ext_msg() when sending netconsole
messages. However, update_userdata() was not holding target_list_lock
during this process, allowing concurrent message transmission to read
partially updated userdata.
This race condition could result in netconsole messages containing
incomplete or inconsistent userdata - for example, reading the old
userdata_length with new extradata_complete content, or vice versa,
leading to truncated or corrupted output.
Fix this by acquiring target_list_lock with spin_lock_irqsave() before
updating extradata_complete and userdata_length, and releasing it after
both fields are fully updated. This ensures that readers see a
consistent view of the userdata, preventing corruption during concurrent
access.
The fix aligns with the existing locking pattern used throughout the
netconsole code, where target_list_lock protects access to target
fields including buf[] and msgcounter that are accessed during message
transmission.
Also get rid of the unnecessary variable complete_idx, which makes it
easier to bail out of update_userdata().
Bagas Sanjaya [Tue, 28 Oct 2025 13:20:27 +0000 (20:20 +0700)]
Documentation: netconsole: Remove obsolete contact people
Breno Leitao has been listed in MAINTAINERS as netconsole maintainer
since 7c938e438c56db ("MAINTAINERS: make Breno the netconsole
maintainer"), but the documentation says otherwise that bug reports
should be sent to original netconsole authors.
Remove obsolate contact info.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20251028132027.48102-1-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abdun Nihaal [Tue, 28 Oct 2025 16:08:41 +0000 (21:38 +0530)]
nfp: xsk: fix memory leak in nfp_net_alloc()
In nfp_net_alloc(), the memory allocated for xsk_pools is not freed in
the subsequent error paths, leading to a memory leak. Fix that by
freeing it in the error path.
Jakub Kicinski [Thu, 30 Oct 2025 00:30:45 +0000 (17:30 -0700)]
Merge branch 'tcp-fix-receive-autotune-again'
Matthieu Baerts says:
====================
tcp: fix receive autotune again
Neal Cardwell found that recent kernels were having RWIN limited
issues, even when net.ipv4.tcp_rmem[2] was set to a very big value like
512MB.
He suspected that tcp_stream default buffer size (64KB) was triggering
heuristic added in ea33537d8292 ("tcp: add receive queue awareness
in tcp_rcv_space_adjust()").
After more testing, it turns out the bug was added earlier
with commit 65c5287892e9 ("tcp: fix sk_rcvbuf overshoot").
I forgot once again that DRS has one RTT latency.
MPTCP also got the same issue.
This series :
- Prevents calling tcp_rcvbuf_grow() on some MPTCP subflows.
- adds rcv_ssthresh, window_clamp and rcv_wnd to trace_tcp_rcvbuf_grow().
- Refactors code in a patch with no functional changes.
- Fixes the issue in the final patch.
====================
Eric Dumazet [Tue, 28 Oct 2025 11:58:01 +0000 (12:58 +0100)]
tcp: add newval parameter to tcp_rcvbuf_grow()
This patch has no functional change, and prepares the following one.
tcp_rcvbuf_grow() will need to have access to tp->rcvq_space.space
old and new values.
Change mptcp_rcvbuf_grow() in a similar way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
[ Moved 'oldval' declaration to the next patch to avoid warnings at
build time. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Neal Cardwell <ncardwell@google.com> Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-3-74b43ba4c84c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Oct 2025 11:57:59 +0000 (12:57 +0100)]
mptcp: fix subflow rcvbuf adjust
The mptcp PM can add subflow to the conn_list before tcp_init_transfer().
Calling tcp_rcvbuf_grow() on such subflow is not correct as later
init will overwrite the update.
Fix the issue calling tcp_rcvbuf_grow() only after init buffer
initialization.
For ice, Grzegorz fixes setting of PHY lane number and logical PF ID for
E82x devices. He also corrects access of CGU (Clock Generation Unit) on
dual complex devices.
Kohei Enju resolves issues with error path cleanup for probe when in
recovery mode on ixgbe and ensures PHY is powered on for link testing
on igc. Lastly, he converts incorrect use of -ENOTSUPP to -EOPNOTSUPP
on igb, igc, and ixgbe.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: use EOPNOTSUPP instead of ENOTSUPP in ixgbe_ptp_feature_enable()
igc: use EOPNOTSUPP instead of ENOTSUPP in igc_ethtool_get_sset_count()
igb: use EOPNOTSUPP instead of ENOTSUPP in igb_get_sset_count()
igc: power up the PHY before the link test
ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
ice: fix usage of logical PF id
ice: fix destination CGU for dual complex E825
ice: fix lane number calculation
====================
netfilter: nft_ct: add seqadj extension for natted connections
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
netfilter: nft_connlimit: fix possible data race on connection count
nft_connlimit_eval() reads priv->list->count to check if the connection
limit has been exceeded. This value is being read without a lock and can
be modified by a different process. Use READ_ONCE() for correctness.
Fixes: df4a90250976 ("netfilter: nf_conncount: merge lookup and add functions") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Wed, 22 Oct 2025 15:18:10 +0000 (17:18 +0200)]
netfilter: nft_ct: enable labels for get case too
conntrack labels can only be set when the conntrack has been created
with the "ctlabel" extension.
For older iptables (connlabel match), adding an "-m connlabel" rule
turns on the ctlabel extension allocation for all future conntrack
entries.
For nftables, its only enabled for 'ct label set foo', but not for
'ct label foo' (i.e. check).
But users could have a ruleset that only checks for presence, and rely
on userspace to set a label bit via ctnetlink infrastructure.
This doesn't work without adding a dummy 'ct label set' rule.
We could also enable extension infra for the first (failing) ctnetlink
request, but unlike ruleset we would not be able to disable the
extension again.
Therefore turn on ctlabel extension allocation if an nftables ruleset
checks for a connlabel too.
Fixes: 1ad8f48df6f6 ("netfilter: nftables: add connlabel set support") Reported-by: Antonio Ojea <aojea@google.com> Closes: https://lore.kernel.org/netfilter-devel/aPi_VdZpVjWujZ29@strlen.de/ Signed-off-by: Florian Westphal <fw@strlen.de>
====================
bug fixes for the hibmcge ethernet driver
This patch set is intended to fix several issues for hibmcge driver:
1. Patch1 fixes the issue where buf avl irq is disabled after irq_handle.
2. Patch2 eliminates the error logs in scenarios without phy.
3. Patch3 fixes the issue where the network port becomes unusable
after a PCIe RAS event.
====================
Jijie Shao [Sat, 25 Oct 2025 01:46:42 +0000 (09:46 +0800)]
net: hibmcge: fix the inappropriate netif_device_detach()
current, driver will call netif_device_detach() in
pci_error_handlers.error_detected() and do reset in
pci_error_handlers.slot_reset().
However, if pci_error_handlers.slot_reset() is not called
after pci_error_handlers.error_detected(),
driver will be detached and unable to recover.
drivers/pci/pcie/err.c/report_error_detected() says:
If any device in the subtree does not have an error_detected
callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
error callbacks of any device in the subtree, and will
exit in the disconnected error state.
Therefore, when the hibmcge device and other devices that do not
support the error_detected callback are under the same subtree,
hibmcge will be unable to do slot_reset even for non-fatal errors.
This path move netif_device_detach() from error_detected() to slot_reset(),
ensuring that detach and reset are always executed together.
Jijie Shao [Sat, 25 Oct 2025 01:46:41 +0000 (09:46 +0800)]
net: hibmcge: remove unnecessary check for np_link_fail in scenarios without phy.
hibmcge driver uses fixed_phy to configure scenarios without PHY,
where the driver is always in a linked state. However,
there might be no link in hardware, so the np_link error
is detected in hbg_hw_adjust_link(), which can cause abnormal logs.
Therefore, in scenarios without a PHY, the driver no longer
checks the np_link status.
Jijie Shao [Sat, 25 Oct 2025 01:46:40 +0000 (09:46 +0800)]
net: hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
irq initialized with the macro HBG_ERR_IRQ_I will automatically
be re-enabled, whereas those initialized with the macro HBG_IRQ_I
will not be re-enabled.
Since the rx buf avl irq is initialized using the macro HBG_IRQ_I,
it needs to be actively re-enabled;
otherwise priv->stats.rx_fifo_less_empty_thrsld_cnt cannot be
correctly incremented.
Fixes: fd394a334b1c ("net: hibmcge: Add support for abnormal irq handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251025014642.265259-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Mon, 27 Oct 2025 14:09:12 +0000 (15:09 +0100)]
dpll: zl3073x: Fix output pin registration
Currently, the signal format of an associated output is not considered
during output pin registration. As a result, the driver registers output
pins that are disabled by the signal format configuration.
Fix this by calling zl3073x_output_pin_is_enabled() to check whether
a given output pin should be registered or not.
Pavel Zhigulin [Fri, 24 Oct 2025 16:13:02 +0000 (19:13 +0300)]
net: cxgb4/ch_ipsec: fix potential use-after-free in ch_ipsec_xfrm_add_state() callback
In ch_ipsec_xfrm_add_state() there is not check of try_module_get
return value. It is very unlikely, but try_module_get() could return
false value, which could cause use-after-free error.
Conditions: The module count must be zero, and a module unload in
progress. The thread doing the unload is blocked somewhere.
Another thread makes a callback into the module for some request
that (for instance) would need to create a kernel thread.
It tries to get a reference for the thread.
So try_module_get(THIS_MODULE) is the right call - and will fail here.
This fix adds checking the result of try_module_get call
Linus Torvalds [Wed, 29 Oct 2025 01:00:40 +0000 (18:00 -0700)]
Merge tag 'v6.18-rc3-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Improve check for malformed payload
- Fix free transport smbdirect potential race
- Fix potential race in credit allocation during smbdirect negotiation
* tag 'v6.18-rc3-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let smb_direct_cm_handler() call ib_drain_qp() after smb_direct_disconnect_rdma_work()
smb: server: call smb_direct_post_recv_credits() when the negotiation is done
ksmbd: transport_ipc: validate payload size before reading handle
Petr Oros [Fri, 24 Oct 2025 19:07:33 +0000 (21:07 +0200)]
dpll: fix device-id-get and pin-id-get to return errors properly
The device-id-get and pin-id-get handlers were ignoring errors from
the find functions and sending empty replies instead of returning
error codes to userspace.
When dpll_device_find_from_nlattr() or dpll_pin_find_from_nlattr()
returned an error (e.g., -EINVAL for "multiple matches" or -ENODEV
for "not found"), the handlers checked `if (!IS_ERR(ptr))` and
skipped adding the device/pin handle to the message, but then still
sent the empty message as a successful reply.
This caused userspace tools to receive empty responses with id=0
instead of proper netlink errors with extack messages like
"multiple matches".
The bug is visible via strace, which shows the kernel sending TWO
netlink messages in response to a single request:
1. Empty reply (20 bytes, just header, no attributes):
recvfrom(3, [{nlmsg_len=20, nlmsg_type=dpll, nlmsg_flags=0, ...},
{cmd=0x7, version=1}], ...)
2. NLMSG_ERROR ACK with extack (because of NLM_F_ACK flag):
recvfrom(3, [{nlmsg_len=60, nlmsg_type=NLMSG_ERROR,
nlmsg_flags=NLM_F_CAPPED|NLM_F_ACK_TLVS, ...},
[{error=0, msg={...}},
[{nla_type=NLMSGERR_ATTR_MSG}, "multiple matches"]]], ...)
The C YNL library parses the first message, sees an empty response,
and creates a result object with calloc() which zero-initializes all
fields, resulting in id=0.
The Python YNL library parses both messages and displays the extack
from the second NLMSG_ERROR message.
Fix by checking `if (IS_ERR(ptr))` first and returning the error
code immediately, so that netlink properly sends only NLMSG_ERROR with
the extack message to userspace. After this fix, both C and Python
YNL tools receive only the NLMSG_ERROR and behave consistently.
This affects:
- DPLL_CMD_DEVICE_ID_GET: now properly returns error when multiple
devices match the criteria (e.g., same module-name + clock-id)
- DPLL_CMD_PIN_ID_GET: now properly returns error when multiple pins
match the criteria (e.g., same module-name)
Before fix:
$ dpll pin id-get module-name ice
0 (wrong - should be error, there are 17 pins with module-name "ice")
After fix:
$ dpll pin id-get module-name ice
Error: multiple matches
(correct - kernel reports the ambiguity via extack)
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20251024190733.364101-1-poros@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kohei Enju [Mon, 6 Oct 2025 12:35:22 +0000 (21:35 +0900)]
igc: use EOPNOTSUPP instead of ENOTSUPP in igc_ethtool_get_sset_count()
igc_ethtool_get_sset_count() returns -ENOTSUPP when a given stringset is
not supported, causing userland programs to get "Unknown error 524".
Since EOPNOTSUPP should be used when error is propagated to userland,
return -EOPNOTSUPP instead of -ENOTSUPP.
Fixes: 36b9fea60961 ("igc: Add support for statistics") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current implementation of the igc driver doesn't power up the PHY
before the link test in igc_ethtool_diag_test(), causing the link test
to always report FAIL when admin state is down and the PHY is
consequently powered down.
To test the link state regardless of admin state, power up the PHY
before the link test in the offline test path. After the link test, the
original PHY state is restored by igc_reset(), so additional code which
explicitly restores the original state is not necessary.
Note that this change is applied only for the offline test path. This is
because in the online path we shouldn't interrupt normal networking
operation and powering up the PHY and restoring the original state would
interrupt that.
This implementation also uses igc_power_up_phy_copper() without checking
the media type, since igc devices are currently only copper devices and
the function is called in other places without checking the media type.
Furthermore, the powering up is on a best-effort basis, that is, we
don't handle failures of powering up (e.g. bus error) and just let the
test report FAIL.
Tested on Intel Corporation Ethernet Controller I226-V (rev 04) with
cable connected and link available.
Set device down and do ethtool test.
# ip link set dev enp0s5 down
Without patch:
# ethtool --test enp0s5
The test result is FAIL
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 1
With patch:
# ethtool --test enp0s5
The test result is PASS
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 0
Fixes: f026d8ca2904 ("igc: add support to eeprom, registers and link self-tests") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kohei Enju [Sun, 31 Aug 2025 20:33:11 +0000 (05:33 +0900)]
ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
The error path of ixgbe_recovery_probe() has two memory bugs.
For non-E610 adapters, the function jumps to clean_up_probe without
calling devlink_free(), leaking the devlink instance and its embedded
adapter structure.
For E610 adapters, devlink_free() is called at shutdown_aci, but
clean_up_probe then accesses adapter->state, sometimes triggering
use-after-free because adapter is embedded in devlink. This UAF is
similar to the one recently reported in ixgbe_remove(). (Link)
Fix both issues by moving devlink_free() after adapter->state access,
aligning with the cleanup order in ixgbe_probe().
Link: https://lore.kernel.org/intel-wired-lan/20250828020558.1450422-1-den@valinux.co.jp/ Fixes: 29cb3b8d95c7 ("ixgbe: add E610 implementation of FW recovery mode") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When distributing RSS and FDIR masks, which are global resources across
the active devices, it is required to have a contiguous PF id, which can
be described as a logical PF id. In the case above, function 0 would
have a logical PF id of 0, function 1 would have a logical PF id
of 1, and functions 4 and 5 would have a logical PF ids 2 and 3
respectively.
Using logical PF id can properly describe which slice of resources can
be used by a particular PF.
The 'function id' to 'logical id' mapping has been introduced with the
commit 015307754a19 ("ice: Support VF queue rate limit and quanta size
configuration"). However, the usage of 'logical_pf_id' field was
unintentionally skipped for profile mask configuration.
Fix it by using 'logical_pf_id' instead of 'pf_id' value when configuring
masks.
Without that patch, wrong indexes, i.e. out of range for given PF, can
be used while configuring resources masks, which might lead to memory
corruption and undefined driver behavior.
The call trace below is one of the examples of such error:
Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Suggested-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Nitka [Mon, 29 Sep 2025 15:29:05 +0000 (17:29 +0200)]
ice: fix destination CGU for dual complex E825
On dual complex E825, only complex 0 has functional CGU (Clock
Generation Unit), powering all the PHYs.
SBQ (Side Band Queue) destination device 'cgu' in current implementation
points to CGU on current complex and, in order to access primary CGU
from the secondary complex, the driver should use 'cgu_peer' as
a destination device in read/write CGU registers operations.
Define new 'cgu_peer' (15) as RDA (Remote Device Access) client over
SB-IOSF interface and use it as device target when accessing CGU from
secondary complex.
This problem has been identified when working on recovery clock
enablement [1]. In existing implementation for E825 devices, only PF0,
which is clock owner, is involved in CGU configuration, thus the
problem was not exposed to the user.
Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Nitka [Fri, 21 Feb 2025 09:39:49 +0000 (10:39 +0100)]
ice: fix lane number calculation
E82X adapters do not have sequential IDs, lane number is PF ID.
Add check for ICE_MAC_GENERIC and skip checking port options.
Also, adjust logical port number for specific E825 device with external
PHY support (PCI device id 0x579F). For this particular device,
with 2x25G (PHY0) and 2x10G (PHY1) port configuration, modification of
pf_id -> lane_number mapping is required. PF IDs on the 2nd PHY start
from 4 in such scenario. Otherwise, the lane number cannot be
determined correctly, leading to PTP init errors during PF initialization.
Fixes: 258f5f9058159 ("ice: Add correct PHY lane assignment") Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 28 Oct 2025 19:13:20 +0000 (12:13 -0700)]
Merge tag 'nfsd-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Regression fixes:
- Revert the patch that removed the cap on MAX_OPS_PER_COMPOUND
- Address a kernel build issue
Stable fixes:
- Fix crash when a client queries new attributes on forechannel
- Fix rare NFSD crash when tracing is enabled"
* tag 'nfsd-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
nfsd: Avoid strlen conflict in nfsd4_encode_components_esc()
NFSD: Fix crash in nfsd4_read_release()
NFSD: Define actions for the new time_deleg FATTR4 attributes
Benjamin Berg [Tue, 28 Oct 2025 10:58:40 +0000 (12:58 +0200)]
wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient. To
make this work, use the same clock to store the timestamp.
CC: stable@vger.kernel.org Fixes: ec3252bff7b6 ("wifi: mac80211: use wiphy work for channel switch") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251028125710.68258c7e4ac4.I4ff2b2cdffbbf858bf5f08baccc7a88c4f9efe6f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Benjamin Berg [Tue, 28 Oct 2025 10:58:39 +0000 (12:58 +0200)]
wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient.
CC: stable@vger.kernel.org Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251028125710.24a7b54e9e37.I063c5c15bf7672f94cea75f83e486a3ca52d098f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Benjamin Berg [Tue, 28 Oct 2025 10:58:38 +0000 (12:58 +0200)]
wifi: mac80211: use wiphy_hrtimer_work for ttlm_work
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient.
CC: stable@vger.kernel.org Fixes: 702e80470a33 ("wifi: mac80211: support handling of advertised TID-to-link mapping") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251028125710.83c2c611545e.I35498a6d883ea24b0dc4910cf521aa768d2a0e90@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Benjamin Berg [Tue, 28 Oct 2025 10:58:37 +0000 (12:58 +0200)]
wifi: cfg80211: add an hrtimer based delayed work item
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
dt-bindings: net: sparx5: Narrow properly LAN969x register space windows
Commit 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register space windows") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Oros [Fri, 24 Oct 2025 18:55:12 +0000 (20:55 +0200)]
dpll: spec: add missing module-name and clock-id to pin-get reply
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Fri, 24 Oct 2025 12:58:53 +0000 (12:58 +0000)]
tools: ynl: avoid print_field when there is no reply
When request a none support device operation, there will be no reply.
In this case, the len(desc) check will always be true, causing print_field
to enter an infinite loop and crash the program. Example reproducer:
# ethtool.py -c veth0
To fix this, return immediately if there is no reply.
Jakub Kicinski [Tue, 28 Oct 2025 01:00:53 +0000 (18:00 -0700)]
Merge tag 'batadv-net-pullrequest-20251024' of https://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- release references to inactive interfaces, by Sven Eckelmann
* tag 'batadv-net-pullrequest-20251024' of https://git.open-mesh.org/linux-merge:
batman-adv: Release references to inactive interfaces
====================
Abdun Nihaal [Thu, 23 Oct 2025 14:18:42 +0000 (19:48 +0530)]
sfc: fix potential memory leak in efx_mae_process_mport()
In efx_mae_enumerate_mports(), memory allocated for mae_mport_desc is
passed as a argument to efx_mae_process_mport(), but when the error path
in efx_mae_process_mport() gets executed, the memory allocated for desc
gets leaked.
Fix that by freeing the memory allocation before returning error.
Fixes: a6a15aca4207 ("sfc: enumerate mports in ef100") Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Link: https://patch.msgid.link/20251023141844.25847-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bagas Sanjaya [Thu, 23 Oct 2025 09:24:06 +0000 (16:24 +0700)]
MAINTAINERS: mark ISDN subsystem as orphan
We have not heard any activities from Karsten in years:
- Last review tag was nine years ago in commit a921e9bd4e22a7
("isdn: i4l: move active-isdn drivers to staging")
- Last message on lore was in October 2020 [1].
Furthermore, messages to isdn mailing list bounce.
Jakub Kicinski [Tue, 28 Oct 2025 00:44:35 +0000 (17:44 -0700)]
Merge tag 'for-net-2025-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- fix corruption in h4_recv_buf() after cleanupCen Zhang (1):
- hci_sync: fix race in hci_cmd_sync_dequeue_once
- btmtksdio: Add pmctrl handling for BT closed state during reset
- Revert "Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()"
- rfcomm: fix modem control handling
- btintel_pcie: Fix event packet loss issue
- ISO: Fix BIS connection dst_type handling
- HCI: Fix tracking of advertisement set/instance 0x00
- ISO: Fix another instance of dst_type handling
- hci_conn: Fix connection cleanup with BIG with 2 or more BIS
- hci_core: Fix tracking of periodic advertisement
- MGMT: fix crash in set_mesh_sync and set_mesh_complete
* tag 'for-net-2025-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: rfcomm: fix modem control handling
Bluetooth: hci_core: Fix tracking of periodic advertisement
Bluetooth: hci_conn: Fix connection cleanup with BIG with 2 or more BIS
Bluetooth: fix corruption in h4_recv_buf() after cleanup
Bluetooth: btintel_pcie: Fix event packet loss issue
Bluetooth: ISO: Fix another instance of dst_type handling
Revert "Bluetooth: L2CAP: convert timeouts to secs_to_jiffies()"
Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_complete
Bluetooth: HCI: Fix tracking of advertisement set/instance 0x00
Bluetooth: btmtksdio: Add pmctrl handling for BT closed state during reset
Bluetooth: ISO: Fix BIS connection dst_type handling
Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once
====================
Petr Oros [Fri, 24 Oct 2025 13:24:38 +0000 (15:24 +0200)]
tools: ynl: fix string attribute length to include null terminator
The ynl_attr_put_str() function was not including the null terminator
in the attribute length calculation. This caused kernel to reject
CTRL_CMD_GETFAMILY requests with EINVAL:
"Attribute failed policy validation".
For a 4-character family name like "dpll":
- Sent: nla_len=8 (4 byte header + 4 byte string without null)
- Expected: nla_len=9 (4 byte header + 5 byte string with null)
The bug was introduced in commit 15d2540e0d62 ("tools: ynl: check for
overflow of constructed messages") when refactoring from stpcpy() to
strlen(). The original code correctly included the null terminator:
Since stpcpy() returns a pointer past the null terminator, the length
included it. The refactored version using strlen() omitted the +1.
The fix also removes NLA_ALIGN() from nla_len calculation, since
nla_len should contain actual attribute length, not aligned length.
Alignment is only for calculating next attribute position. This makes
the code consistent with ynl_attr_put().
CTRL_ATTR_FAMILY_NAME uses NLA_NUL_STRING policy which requires
null terminator. Kernel validates with memchr() and rejects if not
found.
Linus Torvalds [Mon, 27 Oct 2025 17:52:18 +0000 (10:52 -0700)]
Merge tag 'sched_ext-for-6.18-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix scx_kick_pseqs corruption when multiple schedulers are loaded
concurrently
- Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc() to handle
systems with large CPU counts
- Defer queue_balance_callback() until after ops.dispatch to fix
callback ordering issues
- Sync error_irq_work before freeing scx_sched to prevent
use-after-free
- Mark scx_bpf_dsq_move_set_[slice|vtime]() with KF_RCU for proper RCU
protection
- Fix flag check for deferred callbacks
* tag 'sched_ext-for-6.18-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix flag check for deferred callbacks
sched_ext: Fix scx_kick_pseqs corruption on concurrent scheduler loads
sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc()
sched_ext: defer queue_balance_callback() until after ops.dispatch
sched_ext: Sync error_irq_work before freeing scx_sched
sched_ext: Mark scx_bpf_dsq_move_set_[slice|vtime]() with KF_RCU
Although this commit benefits QCA6174, it breaks QCA988x and
QCA9984 [1][2]. Since it is not likely to root cause/fix this
issue in a short time, revert it to get those chips back.
smb: server: let smb_direct_cm_handler() call ib_drain_qp() after smb_direct_disconnect_rdma_work()
All handlers triggered by ib_drain_qp() should already see the
broken connection.
smb_direct_cm_handler() is called under a mutex of the rdma_cm,
we should make sure ib_drain_qp() and all rdma layer logic completes
and unlocks the mutex.
It means free_transport() will also already see the connection
as SMBDIRECT_SOCKET_DISCONNECTED, so we need to call
crdma_[un]lock_handler(sc->rdma.cm_id) around
ib_drain_qp(), rdma_destroy_qp(), ib_free_cq() and ib_dealloc_pd().
Otherwise we free resources while the ib_drain_qp() within
smb_direct_cm_handler() is still running.
We have to unlock before rdma_destroy_id() as it locks again.
Fixes: 141fa9824c0f ("ksmbd: call ib_drain_qp when disconnected") Fixes: 4c564f03e23b ("smb: server: make use of common smbdirect_socket") Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: call smb_direct_post_recv_credits() when the negotiation is done
We now activate sc->recv_io.posted.refill_work and sc->idle.immediate_work
only after a successful negotiation, before sending the negotiation
response.
It means the queue_work(sc->workqueue, &sc->recv_io.posted.refill_work)
in put_recvmsg() of the negotiate request, is a no-op now.
It also means our explicit smb_direct_post_recv_credits() will
have queue_work(sc->workqueue, &sc->idle.immediate_work) as no-op.
This should make sure we don't have races and post any immediate
data_transfer message that tries to grant credits to the peer,
before we send the negotiation response, as that will grant
the initial credits to the peer.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Fixes: 1cde0a74a7a8 ("smb: server: don't use delayed_work for post_recv_credits_work") Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Qianchang Zhao [Wed, 22 Oct 2025 06:27:47 +0000 (15:27 +0900)]
ksmbd: transport_ipc: validate payload size before reading handle
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Reported-by: Qianchang Zhao <pioooooooooip@gmail.com> Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sun, 26 Oct 2025 17:33:46 +0000 (10:33 -0700)]
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Linus Torvalds [Sun, 26 Oct 2025 17:29:45 +0000 (10:29 -0700)]
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Linus Torvalds [Sun, 26 Oct 2025 17:24:39 +0000 (10:24 -0700)]
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Linus Torvalds [Sun, 26 Oct 2025 16:57:18 +0000 (09:57 -0700)]
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
Linus Torvalds [Sun, 26 Oct 2025 16:54:36 +0000 (09:54 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
projects / thirdparty / kernel / linux.git / log
