After a recent change in clang to expose uninitialized warnings from
const variables [1], there is a warning in cxacru_heavy_init():
drivers/usb/atm/cxacru.c:1104:6: error: variable 'bp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1113:39: note: uninitialized use occurs here
1113 | cxacru_upload_firmware(instance, fw, bp);
| ^~
drivers/usb/atm/cxacru.c:1104:2: note: remove the 'if' if its condition is always true
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1095:32: note: initialize the variable 'bp' to silence this warning
1095 | const struct firmware *fw, *bp;
| ^
| = NULL
While the warning is technically correct that bp is conditionally passed
uninitialized to cxacru_upload_firmware(), it is ultimately a false
positive warning on the uninitialized use of bp because the same
condition that initializes bp, instance->modem_type->boot_rom_patch, is
the same one that gates the use of bp within cxacru_upload_firmware().
As this warning occurs in clang's frontend before inlining occurs, it
cannot know that these conditions are indentical to avoid the warning.
Manually inline cxacru_upload_firmware() into cxacru_heavy_init(), as
that is its only callsite, so that clang can see that bp is initialized
and used under the same condition, clearing up the warning without any
functional changes to the code (LLVM was already doing this inlining
later).
Move the cursor position rightward after rendering the character,
not before. This avoids complications that arise when the recursive
console_putc call has to wrap the line and/or scroll the display.
This also fixes the linewrap bug that crops off the rightmost column.
When the cursor is at the bottom of the display, a linefeed will not
move the cursor position further downward. Instead, the display scrolls
upward. Avoid the repeated add/subtract sequence by way of a single
subtraction at the initialization of console_struct_num_rows.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/9d4e8c68a456d5f2bc254ac6f87a472d066ebd5e.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The freq_tables[] array has num_possible_cpus() elements so, to avoid an
out of bounds access, this loop should be capped at "< nb_cpus" instead
of "<= nb_cpus". The freq_tables[] array is allocated in
armada_8k_cpufreq_init().
Cc: stable@vger.kernel.org Fixes: f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.
In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.
When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().
Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.
Currently, the driver performs a length check of the metadata buffer
before the actual metadata size is known and before the metadata is
decided to be copied. This results in valid metadata buffers being
incorrectly marked as invalid.
Move the length check to occur after the metadata size is determined and
is decided to be copied.
Cc: stable@vger.kernel.org Fixes: 088ead255245 ("media: uvcvideo: Add a metadata device node") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-1-ed17f8b1218b@chromium.org Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer length check before calling uvc_parse_format() only ensured
that the buffer has at least 3 bytes (buflen > 2), buf the function
accesses buffer[3], requiring at least 4 bytes.
This can lead to an out-of-bounds read if the buffer has exactly 3 bytes.
Fix it by checking that the buffer has at least 4 bytes in
uvc_parse_format().
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Cc: stable@vger.kernel.org Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250610124107.37360-1-yjjuny.lee@samsung.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup.
Link: https://lkml.kernel.org/r/20250728190248.605750-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection") Cc: stable@vger.kernel.org Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
Some chip types in the ds1307 driver already have OSF handling to
determine whether .read_time provides valid RTC data or returns -EINVAL.
This change removes the clear of the OSF in .probe as the OSF needs to
be preserved to expand the OSF handling to the ds1341 chip type (note
that DS1341 and DS1342 share a datasheet).
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-2-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there are too many block extents for a layoutcommit, they may not
all fit into the maximum-sized RPC. This patch allows the generic pnfs
code to properly handle -ENOSPC returned by the block/scsi layout driver
and trigger additional layoutcommits if necessary.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-5-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At the end of the isect translation, disc_addr represents the physical
disk offset. Thus, end calculated from disk_addr is also a physical disk
offset. Therefore, range checking should be done using map->disk_offset,
not map->start.
Because of integer division, we need to carefully calculate the
disk offset. Consider the example below for a stripe of 6 volumes,
a chunk size of 4096, and an offset of 70000.
According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware
reset is required after power-on, and the reference clock (REF_CLK) must be
established before asserting reset.
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/ Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
'I3C_BCR_HDR_CAP' is still spec v1.0 and has been renamed to 'advanced
capabilities' in v1.1 onwards. The ST pressure sensor LPS22DF does not
have HDR, but has the 'advanced cap' bit set. The core still wants to
get additional information using the CCC 'GETHDRCAP' (or GETCAPS in v1.1
onwards). Not all controllers support this CCC and will notify the upper
layers about it. For instantiating the device, we can ignore this
unsupported CCC as standard communication will work. Without this patch,
the device will not be instantiated at all.
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
LKP found a random config which failed to build because IO accessors
were not defined:
In file included from drivers/i3c/master.c:21:
drivers/i3c/internals.h: In function 'i3c_writel_fifo':
>> drivers/i3c/internals.h:35:9: error: implicit declaration of function 'writesl' [-Werror=implicit-function-declaration]
Add the proper header to where the IO accessors are used.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507150208.BZDzzJ5E-lkp@intel.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250717120046.9022-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing fixed value of 16 worked for UYVY 720P60 over
2 lanes at 594MHz, or UYVY 1080P60 over 4 lanes. (RGB888
1080P60 needs 6 lanes at 594MHz).
It doesn't allow for lower resolutions to work as the FIFO
underflows.
374 is required for 1080P24 or 1080P30 UYVY over 2 lanes @
972Mbit/s, but >374 means that the FIFO underflows on 1080P50
UYVY over 2 lanes @ 972Mbit/s.
Whilst it would be nice to compute it, the required information
isn't published by Toshiba.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling tc358743_set_fmt, the code was calling tc358743_get_fmt
to choose a valid format. However that sets the colorspace
based on information read back from the chip, not the colour
format requested.
The result was that if you called try or set format for UYVY
when the current format was RGB3 then you would get told SRGB,
and try RGB3 when current was UYVY and you would get told
SMPTE170M.
The value programmed in the VI_REP register for the colorspace
is always set by this driver, therefore there is no need to read
back the value, and never set to REC709.
Return the colorspace based on the format set/tried instead.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe for the TC358743 reads the CHIPID register from
the device and compares it to the expected value of 0.
If the I2C request fails then that also returns 0, so
the driver loads thinking that the device is there.
Generally I2C communications are reliable so there is
limited need to check the return value on every transfer,
therefore only amend the one read during probe to check
for I2C errors.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org Tested-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
The function divides number of online CPUs by num_core_siblings, and
later checks the divider by zero. This implies a possibility to get
and divide-by-zero runtime error. Fix it by moving the check prior to
division. This also helps to save one indentation level.
Not all tasks have an ABI associated or vDSO mapped,
for example kthreads never do.
If such a task ever ends up calling stack_top(), it will derefence the
NULL ABI pointer and crash.
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted.
The reproducer builds a corrupted file on disk with a negative i_size value.
Add a check when opening this file to avoid subsequent operation failures.
Reported-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=630f6d40b3ccabc8e96e Tested-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fileset value of the inode copy from the disk by the reproducer is
AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its
inode pages are not truncated. This causes the bugon to be triggered when
executing clear_inode() because nrpages is greater than 0.
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
These functions are exported but their prototypes are not defined.
This patch adds the missing function prototypes to fix the following
compilation warnings:
arch/mips/kernel/vpe-mt.c:180:7: error: no previous prototype for 'vpe_alloc' [-Werror=missing-prototypes]
180 | void *vpe_alloc(void)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:198:5: error: no previous prototype for 'vpe_start' [-Werror=missing-prototypes]
198 | int vpe_start(void *vpe, unsigned long start)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:208:5: error: no previous prototype for 'vpe_stop' [-Werror=missing-prototypes]
208 | int vpe_stop(void *vpe)
| ^~~~~~~~
arch/mips/kernel/vpe-mt.c:229:5: error: no previous prototype for 'vpe_free' [-Werror=missing-prototypes]
229 | int vpe_free(void *vpe)
| ^~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Synopsys Watchdog driver sets the default timeout to 30 seconds,
but on some devices this is not a valid timeout. E.g. on RK3588 the
actual timeout being used is 44 seconds instead.
Once the watchdog is started the value is updated accordingly, but
it would be better to expose a sensible timeout to userspace without
the need to first start the watchdog.
sprintf() is discouraged for use with bounded destination buffers
as it does not prevent buffer overflows when the formatted output
exceeds the destination buffer size. snprintf() is a safer
alternative as it limits the number of bytes written and ensures
NUL-termination.
Replace sprintf() with snprintf() for copying the debug string
into a temporary buffer, using ORANGEFS_MAX_DEBUG_STRING_LEN as
the maximum size to ensure safe formatting and prevent memory
corruption in edge cases.
EDIT: After this patch sat on linux-next for a few days, Dan
Carpenter saw it and suggested that I use scnprintf instead of
snprintf. I made the change and retested.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Signed-off-by: Showrya M N <showrya@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().
To query root path (without msearch wildcard) it is needed to
send pattern '\' instead of '' (empty string).
This allows to use CIFSFindFirst() to query information about root path
which is being used in followup changes.
This change fixes the stat() syscall called on the root path on the mount.
It is because stat() syscall uses the cifs_query_path_info() function and
it can fallback to the CIFSFindFirst() usage with msearch=false.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fails vhost_add_used_n() early when __vhost_add_used()
fails to make sure used idx is not updated with stale used ring
information.
Reported-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A decade ago commit 6d08acd2d32e ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde22d ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function `_rtl_pci_init_one_rxdesc()` can fail even when the new
`skb` is passed because of a DMA mapping error. If it fails, the `skb`
is not saved in the rx ringbuffer and thus lost.
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
When an stp sync check is handled on a system with multiple
cpus each cpu gets a machine check but only the first one
actually handles the sync operation. All other CPUs spin
waiting for the first one to finish with a short udelay().
But udelay can't be used here as the first CPU modifies tod_clock_base
before performing the sync op. During this timeframe
get_tod_clock_monotonic() might return a non-monotonic time.
The time spent waiting should be very short and udelay is a busy loop
anyways, therefore simply remove the udelay.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Currently, __mkroute_output overrules the MTU value configured for
broadcast routes.
This buggy behaviour can be reproduced with:
ip link set dev eth1 mtu 9000
ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2
ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500
The maximum packet size should be 1500, but it is actually 8000:
ping -b 192.168.0.255 -s 8000
Fix __mkroute_output to allow MTU values to be configured for
for broadcast routes (to support a mixed-MTU local-area-network).
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Management frames sent by userspace should never have the
order/HTC bit set, reject that. It could also cause some
confusion with the length of the buffer and the header so
the validation might end up wrong.
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Xinxin Wan <xinxin.wan@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'sprintf' call in 'add_tuning_control' may exceed the 44-byte
buffer if either string argument is too long. This triggers a compiler
warning.
Replaced 'sprintf' with 'snprintf' to limit string lengths to prevent
overflow.
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
In the function mperf_start(), mperf_monitor snapshots the time, tsc
and finally the aperf,mperf MSRs. However, this order of snapshotting
in is reversed in mperf_stop(). As a result, the C0 residency (which
is computed as delta_mperf * 100 / delta_tsc) is under-reported on
CPUs that is 100% busy.
Fix this by snapshotting time, tsc and then aperf,mperf in
mperf_stop() in the same order as in mperf_start().
Checking for the endpoint type is no reason for a WARN, as that can
cause a reboot. A driver not checking the endpoint type must not cause a
reboot, as there is just no point in this. We cannot prevent a device
from doing something incorrect as a reaction to a transfer. Hence
warning for a mere assumption being wrong is not sensible.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250612122149.2559724-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
code mistakenly used a hardcoded index (codec[1]) instead of
iterating, over the codec array using the loop variable i.
Use codec[i] instead of codec[1] to match the loop iteration.
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
In the error path of sd_set_power_mode() we don't update host->power_mode,
which could lead to an imbalance of the runtime PM usage count. Fix this by
always updating host->power_mode.
When a GHES (Generic Hardware Error Source) triggers a panic, add the
TAINT_MACHINE_CHECK taint flag to the kernel. This explicitly marks the
kernel as tainted due to a machine check event, improving diagnostics
and post-mortem analysis. The taint is set with LOCKDEP_STILL_OK to
indicate lockdep remains valid.
At large scale deployment, this helps to quickly determine panics that
are coming due to hardware failures.
Initialization of the local acpi_object in acpi_processor_get_info()
only sets the first 4 bytes to zero and is thus incomplete. This is
indicated by messages like:
acpi ACPI0007:be: Invalid PBLK length [166288104]
Fix this by initializing all 16 bytes of the processor member of that
union.
When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).
If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.
To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.
If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).
This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Since commit c5b6ababd21a ("locking/mutex: implement
mutex_trylock_nested") makes mutex_trylock() as an inlined
function if CONFIG_DEBUG_LOCK_ALLOC=y, we can not use
mutex_trylock() for testing the glob filter of ftrace.
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4
projects / thirdparty / kernel / stable.git / log
