In case OOB write is requested during a data write, ECC is currently
lost. Avoid this issue by only writing in the free spare area.
This issue has been seen with a YAFFS2 file system.
ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the
extent list of this running mmap executable. The user supplied buffer to
hold the fiemap information page faults calling ocfs2_page_mkwrite() which
will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same
semaphore. This recursive semaphore will hold filesystem locks and causes
a hang of the fileystem.
The ip_alloc_sem protects the inode extent list and size. Release the
read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap()
and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock
on the last extent but simplifies the error path.
Link: https://lkml.kernel.org/r/61d1a62b-2631-4f12-81e2-cd689914360b@oracle.com Fixes: 00dc417fa3e7 ("ocfs2: fiemap support") Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Reported-by: syzbot+541dcc6ee768f77103e7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=541dcc6ee768f77103e7 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang 22 recently added support for defining __SANITIZE__ macros similar
to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e)
with the existing defines that the kernel creates to emulate this behavior
with existing clang versions.
In file included from <built-in>:3:
In file included from include/linux/compiler_types.h:171:
include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined]
37 | #define __SANITIZE_THREAD__
| ^
<built-in>:352:9: note: previous definition is here
352 | #define __SANITIZE_THREAD__ 1
| ^
Refactor compiler-clang.h to only define the sanitizer macros when they
are undefined and adjust the rest of the code to use these macros for
checking if the sanitizers are enabled, clearing up the warnings and
allowing the kernel to easily drop these defines when the minimum
supported version of LLVM for building the kernel becomes 22.0.0 or newer.
dma_free_coherent() must only be called if the corresponding
dma_alloc_coherent() call has succeeded. Calling it when the allocation fails
leads to undefined behavior.
When the check_[op]_overflow() helpers were introduced, all arguments
were required to be the same type to make the fallback macros simpler.
However, now that the fallback macros have been removed[1], it is fine
to allow mixed types, which makes using the helpers much more useful,
as they can be used to test for type-based overflows (e.g. adding two
large ints but storing into a u8), as would be handy in the drm core[2].
Remove the restriction, and add additional self-tests that exercise
some of the mixed-type overflow cases, and double-check for accidental
macro side-effects.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-hardening@vger.kernel.org Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
[ dropped the test portion of the commit as that doesn't apply to
5.15.y - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
Typo in ff_lseg_match_mirrors makes the diff ineffective. This results
in merge happening all the time. Merge happening all the time is
problematic because it marks lsegs invalid. Marking lsegs invalid
causes all outstanding IO to get restarted with EAGAIN and connections
to get closed.
Closing connections constantly triggers race conditions in the RDMA
implementation...
Fixes: 660d1eb22301c ("pNFS/flexfile: Don't merge layout segments if the mirrors don't match") Signed-off-by: Jonathan Curley <jcurley@purestorage.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both tracing_mark_write and tracing_mark_raw_write call
__copy_from_user_inatomic during preempt_disable. But in some case,
__copy_from_user_inatomic may trigger page fault, and will call schedule()
subtly. And if a task is migrated to other cpu, the following warning will
be trigger:
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
An example can illustrate this issue:
process flow CPU
---------------------------------------------------------------------
Don't clear the capabilities that are not going to get reset by the call
to _nfs4_server_capabilities().
Reported-by: Scott Haiden <scott.b.haiden@gmail.com> Fixes: b01f21cacde9 ("NFS: Fix the setting of capabilities when automounting a new filesystem") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent commit f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS
errors") has changed the error return type of ff_layout_choose_ds_for_read() from
NULL to an error pointer. However, not all code paths have been updated
to match the change. Thus, some non-NULL checks will accept error pointers
as a valid return value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors") Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
The driver defines IMX214_DEFAULT_LINK_FREQ 480000000, and then
IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10),
which works out as 384MPix/s. (The 8 is 4 lanes and DDR.)
Parsing the PLL registers with the defined 24MHz input. We're in single
PLL mode, so MIPI frequency is directly linked to pixel rate. VTCK ends
up being 1200MHz, and VTPXCK and OPPXCK both are 120MHz. Section 5.3
"Frame rate calculation formula" says "Pixel rate
[pixels/s] = VTPXCK [MHz] * 4", so 120 * 4 = 480MPix/s, which basically
agrees with my number above.
3.1.4. MIPI global timing setting says "Output bitrate = OPPXCK * reg
0x113[7:0]", so 120MHz * 10, or 1200Mbit/s. That would be a link
frequency of 600MHz due to DDR.
That also matches to 480MPix/s * 10bpp / 4 lanes / 2 for DDR.
Keep the previous link frequency for backward compatibility.
Acked-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: André Apitzsch <git@apitzsch.eu> Fixes: 436190596241 ("media: imx214: Add imx214 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[ changed dev_err() to dev_err_probe() for the final error case ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reported-by: Thomas Dreibholz <dreibh@simula.no> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[adjusted patch by removing WRITE_ONCE to take into account the missing
commit 72603d207d59 ("mptcp: use WRITE_ONCE for the pernet *_max")] Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cross-thread attacks are generally harder as they require the victim to be
co-located on a core. However, with VMSCAPE the adversary targets belong to
the same guest execution, that are more likely to get co-located. In
particular, a thread that is currently executing userspace hypervisor
(after the IBPB) may still be targeted by a guest execution from a sibling
thread.
Issue a warning about the potential risk, except when:
- SMT is disabled
- STIBP is enabled system-wide
- Intel eIBRS is enabled (which implies STIBP protection)
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Amit Shah <amit.shah@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpu_bugs_smt_update() uses global variables from different mitigations. For
SMT updates it can't currently use vmscape_mitigation that is defined after
it.
Since cpu_bugs_smt_update() depends on many other mitigations, move it
after all mitigations are defined. With that, it can use vmscape_mitigation
in a moment.
No functional change.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Amit Shah <amit.shah@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Sean Christopherson <seanjc@google.com>
[Amit: Use CPUID word 22 instead of 21 for the 5.10 backport] Signed-off-by: Amit Shah <amit.shah@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
[Amit:
* Drop unsupported Intel families: ARROWLAKE, LUNARLAKE, METEORLAKE,
GRANITERAPIDS_X, EMERALDRAPIDS_X, ATOM_CRESTMONT_X; and unlisted ATOM
types for RAPTORLAKE and ALDERLAKE
* s/ATOM_GRACEMONT/ALDERLAKE_N/
* Drop unsupported AMD family: 0x1a] Signed-off-by: Amit Shah <amit.shah@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The echo_interval is not limited in any way during mounting,
which makes it possible to write a large number to it. This can
cause an overflow when multiplying ctx->echo_interval by HZ in
match_server().
Add constraints for echo_interval to smb3_fs_context_parse_param().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: adfeb3e00e8e1 ("cifs: Make echo interval tunable") Cc: stable@vger.kernel.org Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Signed-off-by: Steve French <stfrench@microsoft.com>
[ Adapted to older CIFS filesystem structure and mount option parsing ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com> Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300 Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
[ Changed error path ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657fa ("spi: lpspi: Fix CLK pin becomes low before one transfer") Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver currently supports multiple chip-selects, but only sets the
polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for
the desired chip-select.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT") Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the do_validate_mem(), the call to add_interval() does not
handle errors. If kmalloc() fails in add_interval(), it could
result in a null pointer being inserted into the linked list,
leading to illegal memory access when sub_interval() is called
next.
This patch adds an error handling for the add_interval(). If
add_interval() returns an error, the function will return early
with the error code.
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
With lan88xx based devices the lan78xx driver can get stuck in an
interrupt loop while bringing the device up, flooding the kernel log
with messages like the following:
lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped
Removing interrupt support from the lan88xx PHY driver forces the
driver to use polling instead, which avoids the problem.
The issue has been observed with Raspberry Pi devices at least since
4.14 (see [1], bug report for their downstream kernel), as well as
with Nvidia devices [2] in 2020, where disabling interrupts was the
vendor-suggested workaround (together with the claim that phylib
changes in 4.9 made the interrupt handling in lan78xx incompatible).
Iperf reports well over 900Mbits/sec per direction with client in
--dualtest mode, so there does not seem to be a significant impact on
throughput (lan88xx device connected via switch to the peer).
In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.
This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Based on changes in the 2021 public version of the randstruct
out-of-tree GCC plugin[1], more carefully update the attributes on
resulting decls, to avoid tripping checks in GCC 15's
comptypes_check_enum_int() when it has been configured with
"--enable-checking=misc":
arch/arm64/kernel/kexec_image.c:132:14: internal compiler error: in comptypes_check_enum_int, at c/c-typeck.cc:1519
132 | const struct kexec_file_ops kexec_image_ops = {
| ^~~~~~~~~~~~~~
internal_error(char const*, ...), at gcc/gcc/diagnostic-global-context.cc:517
fancy_abort(char const*, int, char const*), at gcc/gcc/diagnostic.cc:1803
comptypes_check_enum_int(tree_node*, tree_node*, bool*), at gcc/gcc/c/c-typeck.cc:1519
...
When building the randomized replacement tree of struct members, the
randstruct GCC plugin would insert, as the first member, a 0-sized void
member. This appears as though it was done to catch non-designated
("unnamed") static initializers, which wouldn't be stable since they
depend on the original struct layout order.
This was accomplished by having the side-effect of the "void member"
tripping an assert in GCC internals (count_type_elements) if the member
list ever needed to be counted (e.g. for figuring out the order of members
during a non-designated initialization), which would catch impossible type
(void) in the struct:
security/landlock/fs.c: In function ‘hook_file_ioctl_common’:
security/landlock/fs.c:1745:61: internal compiler error: in count_type_elements, at expr.cc:7075
1745 | .u.op = &(struct lsm_ioctlop_audit) {
| ^
However this is a redundant safety measure since randstruct uses the
__designated_initializer attribute both internally and within the
__randomized_layout attribute macro so that this would be enforced
by the compiler directly even when randstruct was not enabled (via
-Wdesignated-init).
A recent change in Landlock ended up tripping the same member counting
routine when using a full-struct copy initializer as part of an anonymous
initializer. This, however, is a false positive as the initializer is
copying between identical structs (and hence identical layouts). The
"path" member is "struct path", a randomized struct, and is being copied
to from another "struct path", the "f_path" member:
As can be seen with the coming randstruct KUnit test, there appears to
be no behavioral problems with this kind of initialization when the void
member is removed from the randstruct GCC plugin, so remove it.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org> Closes: https://lore.kernel.org/lkml/Z_PRaKx7q70MKgCA@gallifrey/ Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/ Reported-by: WangYuli <wangyuli@uniontech.com> Closes: https://lore.kernel.org/lkml/337D5D4887277B27+3c677db3-a8b9-47f0-93a4-7809355f1381@uniontech.com/ Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin") Signed-off-by: Kees Cook <kees@kernel.org>
Stable-dep-of: f39f18f3c353 ("randstruct: gcc-plugin: Fix attribute addition") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
[ Applied to .dts instead of .dtsi ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com> Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ no WRITE_ONCE() in older trees ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer arithmentic for accessing the tail tag only works
for linear skbs.
For nonlinear skbs, it reads uninitialized memory inside the
skb headroom, essentially randomizing the tag. I have observed
it gets set to 6 most of the time.
Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6
(which does not exist for the ksz9896 that's in use), dropping the packet.
Debug prints added by me (not included in this patch):
Call skb_linearize before trying to access the tag.
This patch fixes ksz9477_rcv which is used by the ksz9896 I have at
hand, and also applies the same fix to ksz8795_rcv which seems to have
the same problem.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de> CC: stable@vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cherry.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ linux/unaligned.h => asm/unaligned.h ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change") Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
[ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata.
If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires
it to be locked.
Page table traversal is allowed under any one of the mmap lock, the
anon_vma lock (if the VMA is associated with an anon_vma), and the
mapping lock (if the VMA is associated with a mapping); and so to be
able to remove page tables, we must hold all three of them.
retract_page_tables() bails out if an ->anon_vma is attached, but does
this check before holding the mmap lock (as the comment above the check
explains).
If we racily merged an existing ->anon_vma (shared with a child
process) from a neighboring VMA, subsequent rmap traversals on pages
belonging to the child will be able to see the page tables that we are
concurrently removing while assuming that nothing else can access them.
Repeat the ->anon_vma check once we hold the mmap lock to ensure that
there really is no concurrent page table access.
Hitting this bug causes a lockdep warning in collapse_and_free_pmd(),
in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)".
It can also lead to use-after-free access.
Link: https://lore.kernel.org/linux-mm/CAG48ez3434wZBKFFbdx4M9j6eUwSUVPd4dxhzW_k_POneSDF+A@mail.gmail.com/ Link: https://lkml.kernel.org/r/20230111133351.807024-1-jannh@google.com Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Jann Horn <jannh@google.com> Reported-by: Zach O'Keefe <zokeefe@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@intel.linux.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[doebel@amazon.de: Kernel 5.10 uses different control flow pattern,
context adjustments] Signed-off-by: Bjoern Doebel <doebel@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Co-developed-by: Mikael Wessel <post@mikaelkw.online> Signed-off-by: Mikael Wessel <post@mikaelkw.online> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b0267 ("batman-adv: network coding - receive coded packets and decode them") Cc: stable@vger.kernel.org Reported-by: Stanislav Fort <disclosure@aisle.com> Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall") Cc: stable@vger.kernel.org Signed-off-by: John Evans <evans1210144@gmail.com> Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The adapter->chan_stats[] array is initialized in
mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out
memory. The array is filled in mwifiex_update_chan_statistics()
and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls
mwifiex_cfg80211_dump_survey() before the data has been filled in.
Also the mwifiex_update_chan_statistics() function doesn't necessarily
initialize the whole array. Since the array was not initialized at
the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's
more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
Cc: stable@vger.kernel.org Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails.
Fixes: b3f9b92a6ec1 ("[PPP]: add PPP MPPE encryption module") Signed-off-by: Qingfang Deng <dqfext@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Yue Haibing <yuehaibing@huawei.com> Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When device_register() return error in atm_register_sysfs(), which can be
triggered by kzalloc fail in device_private_init() or other reasons,
kmemleak reports the following memory leaks:
The inetdev_init() function never returns NULL. Check for error
pointers instead.
Fixes: 22600596b675 ("ipv4: give an IPv4 dev to blackhole_netdev") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/aLaQWL9NguWmeM1i@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
All paths in probe that call goto defer do so before assigning phydev
and thus it makes sense to cleanup the prior index. It also fixes a bug
where index 0 does not get cleaned up.
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver") Signed-off-by: Zhen Ni <zhen.ni@easystack.cn> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Fabian Bläse <fabian@blaese.de> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dsp_hwec_enable() allocates dup pointer by kstrdup(arg),
but then it updates dup variable by strsep(&dup, ",").
As a result when it calls kfree(dup), the dup variable may be
a modified pointer that no longer points to the original allocated
memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c22999
("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a4381618262 ("mISDN: Remove VLAs") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250828081457.36061-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as
the register address to GetByte(), instead of fetching the register
value and OR-ing it with FullDuplex. This results in an invalid
register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex
before writing it back.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250827192645.658496-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The helper registration return value is passed-through by module_init
callbacks which modprobe confuses with the harmless -EEXIST returned
when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been
registered and won't work.
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer.
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Cc: stable@vger.kernel.org # v5.9+ Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context: removed metadata health tracking calls ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default codec for speaker amp's DAI Link is max98373 and will be
overwritten in probe function if the board id is sof_da7219_mx98360a.
However, the probe function does not do it because the board id is
changed in earlier commit.
Fixes: 1cc04d195dc2 ("ASoC: Intel: sof_da7219_max98373: shrink platform_id below 20 characters") Signed-off-by: Brent Lu <brent.lu@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210726094525.5748-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upstream commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f ("drm/dp:
Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") the
reverted commit backported causes a regression, on one eDP panel at
least resulting in display flickering, described in detail at the Link:
below. The issue fixed by the upstream commit will need a different
solution, revert the backport for now.
When a user requests more than 60 bytes of data the MCP2221 must chunk
the data in chunks up to 60 bytes long (see command/response code 0x40
in the datasheet).
In order to signal that the device has more data the (undocumented) byte
at byte index 2 of the Get I2C Data response uses the value 0x54. This
contrasts with the case for the final data chunk where the value
returned is 0x55 (MCP2221_I2C_READ_COMPL). The fact that 0x55 was not
returned in the response was interpreted by the driver as a failure
meaning that all reads of more than 60 bytes would fail.
Add support for reads that are split over multiple chunks by looking for
the response code indicating that more data is expected and continuing
the read as the code intended. Some timing delays are required to ensure
the chip has time to refill its FIFO as data is read in from the I2C
bus. This timing has been tested in my system when configured for bus
speeds of 50KHz, 100KHz, and 400KHz and operates well.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Fixes: 67a95c21463d0 ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag] Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the initial commit of this driver the I2C bus speed has been
reconfigured for every single transfer. This is despite the fact that we
never change the speed and it is never "lost" by the chip.
Upon investigation we find that what was really happening was that the
setting of the bus speed had the side effect of cancelling a previous
failed command if there was one, thereby freeing the bus. This is the
part that was actually required to keep the bus operational in the face
of failed commands.
Instead of always setting the speed, we now correctly cancel any failed
commands as they are detected. This means we can just set the bus speed
at probe time and remove the previous speed sets on each transfer.
This has the effect of improving performance and reducing the number of
commands required to complete transfers.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Fixes: 67a95c21463d ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag] Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp") Signed-off-by: James Jones <jajones@nvidia.com> Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DMA_DIRECT_REMAP is enabled, atomic pool pages are
remapped via dma_common_contiguous_remap() using the supplied
pgprot. Currently, the mapping uses
pgprot_dmacoherent(PAGE_KERNEL), which leaves the memory encrypted
on systems with memory encryption enabled (e.g., ARM CCA Realms).
This can cause the DMA layer to fail or crash when accessing the
memory, as the underlying physical pages are not configured as
expected.
Fix this by requesting a decrypted mapping in the vmap() call:
pgprot_decrypted(pgprot_dmacoherent(PAGE_KERNEL))
This ensures that atomic pool memory is consistently mapped
unencrypted.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels.
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive") Signed-off-by: Li Nan <linan122@huawei.com> Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
