arm64: dts: qcom: move data-lanes to the DP-out endpoint
Support for the data-lanes declaration in the DP node is deprecated.
Move them to the corresponding endpoint as recommended by the current DP
bindings.
Follow the example of other DP controllers and also eDP controller on
SC7280 and move mdss_dp3_out endpoint declaration to the SoC
DTSI. This slightly reduces the boilerplate in the platform DT files and
also reduces the difference between DP and eDP controllers.
Follow the example of other DP controllers and also eDP controller on
SC7280 and move all mdss[01]_dp[0123]_out endpoints declaration to the
SoC DTSI. This slightly reduces the boilerplate in the platform DT files
and also reduces the difference between DP and eDP controllers.
Follow the example of other DP controllers and also eDP controller on
SC7280 and move mdss_edp_out endpoint declaration to the SoC DTSI. This
slightly reduces the boilerplate in the platform DT files and also
reduces the difference between DP and eDP controllers.
arm64: dts: qcom: sa8775p: remove aux clock from pcie phy
The gcc_aux_clk is used by the PCIe Root Complex (RC) and is not required
by the PHY. The correct clock for the PHY is gcc_phy_aux_clk, which this
patch uses to replace the incorrect reference.
The distinction between AUX_CLK and PHY_AUX_CLK is important: AUX_CLK is
typically used by the controller, while PHY_AUX_CLK is required by certain
PHYs—particularly Gen4 QMP PHYs—for internal operations such as clock
gating and power management. Some non-Gen4 Qualcomm PHYs also use
PHY_AUX_CLK, but they do not require AUX_CLK.
This change ensures proper clock configuration and avoids unnecessary
dependencies.
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250725102231.3608298-3-ziyue.zhang@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
sc7280.dtsi already includes the very same definition (bar 'memory@'
vs 'video@', which doesn't matter). Remove the duplicate to fix a lot
of dtbs W=1 warning instances (unique_unit_address_if_enabled).
Allow configuration of download mode via qcom_scm driver via specifying
download mode register address in the TCSR space. It is especially useful
for a clean watchdog reset without entry into download mode.
The problem remained un-noticed until now since error reporting for
missing download mode configuration feature was explicitly suppressed.
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: Enable HBR3 on external DPs
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
arm64: dts: qcom: x1-crd: Enable HBR3 on external DPs
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Replace clock-frequency in camera sensor node
The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. Replace it in
the device tree.
Stephan Gerhold [Mon, 14 Jul 2025 11:48:15 +0000 (13:48 +0200)]
arm64: dts: qcom: x1e80100-crd: Add USB multiport fingerprint reader
The X1E80100 CRD has a Goodix fingerprint reader connected to the USB
multiport controller on eUSB6. All other ports (including USB super-speed
pins) are unused.
Set it up in the device tree together with the NXP PTN3222 repeater.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250714-x1e80100-crd-fp-v2-1-3246eb02b679@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Notably, the one related to cluster0 requires that it's mapped with
the nE memory attribute. This is specific to a single instance, on this
platform only and should not be mimicked elsewhere.
dt-bindings: arm: qcom-soc: Document new Milos and Glymur SoCs
Extend the schema enforcing correct SoC-block naming to cover Milos
(compatibles already accepted by some maintainers for next release) and
Glymur (posted on mailing lists [1]) SoCs.
arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang
On certain platforms (e.g., QCS615), consumers of LDO12A—such as PCIe,
UFS, and eMMC—may draw more than 10mA of current during boot. This can
exceed the regulator's limit in Low Power Mode (LPM), triggering current
limit protection and causing the system to hang.
To address this, there are two possible approaches:
a) Set the regulator's initial mode to High Performance Mode (HPM) in
the device tree.
b) Keep the default LPM setting and have each consumer driver explicitly
set its current load.
Since some regulators are shared among multiple consumers, and setting
the current must be coordinated across all of them, we will initially
adopt option a by setting the regulator to HPM. We can later migrate to
option b when the timing is appropriate and all consumer drivers are
ready.
Add the missing clkreq pinctrl entry to the PCIe1 node. This ensures proper
configuration of the CLKREQ# signal, which is needed for proper functioning
of PCIe ASPM.
George Moussalem [Mon, 21 Jul 2025 06:04:36 +0000 (10:04 +0400)]
arm64: dts: qcom: Update IPQ5018 xo_board_clk to use fixed factor clock
The xo_board_clk is fixed to 24 MHZ, which is routed from WiFi output
clock 96 MHZ (also being the reference clock of CMN PLL) divided by 4
to the analog block routing channel. Update the xo_board_clk nodes in
the board DTS files to use clock-div/clock-mult accordingly.
George Moussalem [Mon, 21 Jul 2025 06:04:35 +0000 (10:04 +0400)]
arm64: dts: ipq5018: Add CMN PLL node
Add CMN PLL node for enabling output clocks to the networking
hardware blocks on IPQ5018 devices.
The reference clock of CMN PLL is routed from XO to the CMN PLL
through the internal WiFi block.
.XO (48 MHZ) --> WiFi (multiplier/divider)--> 96 MHZ to CMN PLL.
arm64: dts: qcom: qcs8300: Add EPSS l3 interconnect provider node and CPUCP OPP tables to scale DDR/L3
Add Epoch Subsystem (EPSS) L3 interconnect provider node and OPP tables
required to scale DDR and L3 per freq-domain on QCS8300 platform.
As QCS8300 and SA8775P SoCs have same EPSS hardware, added SA8775P
compatible as fallback for QCS8300 EPSS device node.
arm64: dts: qcom: x1e80100-qcp: enable pcie3 x8 slot for X1E80100-QCP
Add perst, wake and clkreq sideband signals and required regulators in
PCIe3 controller and PHY device tree node. Describe the voltage rails of
the x8 PCI slots for PCIe3 port.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250722091151.1423332-4-quic_wenbyao@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dt-bindings: arm: qcom: Drop redundant free-form SoC list
The schema and Devicetree specification defines how list of top-level
compatibles should be created, thus first paragraph explaining this is
completely redundant.
The list of SoCs is redundant as well, because the schema lists them.
On the other hand, Linux kernel should not be place to store marketing
names of some company products, so such list is irrelevant here.
arm64: dts: qcom: sdm845-samsung-starqltechn: fix GPIO lookup flags for i2c SDA and SCL
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
arm64: dts: qcom: qrb4210-rb2: fix GPIO lookup flags for i2c SDA and SCL
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
arm64: dts: qcom: qrb2210-rb1: fix GPIO lookup flags for i2c SDA and SCL
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
George Moussalem [Mon, 30 Jun 2025 12:35:02 +0000 (16:35 +0400)]
arm64: dts: qcom: ipq5018: Add GE PHY to internal mdio bus
The IPQ5018 SoC contains an internal GE PHY, always at phy address 7.
As such, let's add the GE PHY node to the SoC dtsi.
The LDO controller found in the SoC must be enabled to provide constant
low voltages to the PHY. The mdio-ipq4019 driver already has support
for this, so adding the appropriate TCSR register offset.
In addition, the GE PHY outputs both the RX and TX clocks to the GCC
which gate controls them and routes them back to the PHY itself.
So let's create two DT fixed clocks and register them in the GCC node.
George Moussalem [Mon, 30 Jun 2025 12:35:01 +0000 (16:35 +0400)]
arm64: dts: qcom: ipq5018: Add MDIO buses
IPQ5018 contains two mdio buses of which one bus is used to control the
SoC's internal GE PHY, while the other bus is connected to external PHYs
or switches.
There's already support for IPQ5018 in the mdio-ipq4019 driver, so let's
simply add the mdio nodes for them.
Luo Jie [Tue, 10 Jun 2025 10:35:21 +0000 (18:35 +0800)]
arm64: dts: qcom: Update IPQ5424 xo_board to use fixed factor clock
xo_board is fixed to 24 MHZ, which is routed from WiFi output clock
48 MHZ (also being the reference clock of CMN PLL) divided 2 by
analog block routing channel.
Luo Jie [Tue, 10 Jun 2025 10:35:20 +0000 (18:35 +0800)]
arm64: dts: qcom: ipq5424: Add CMN PLL node
Add CMN PLL node for enabling output clocks to the networking
hardware blocks on IPQ5424 devices.
The reference clock of CMN PLL is routed from XO to the CMN PLL
through the internal WiFi block.
.XO (48 MHZ or 96 MHZ or 192 MHZ)-->WiFi (multiplier/divider)-->
48 MHZ to CMN PLL.
Luca Weiss [Thu, 1 May 2025 06:48:50 +0000 (08:48 +0200)]
arm64: dts: qcom: sm6350: Add q6usbdai node
Add a node for q6usb which handles USB audio offloading, allowing to
play audio via a USB-C headset with lower power consumption and enabling
some other features.
We also need to set num-hc-interrupters for the dwc3 for the q6usb to be
able to use its sideband interrupter.
Jens Glathe [Tue, 24 Jun 2025 06:46:00 +0000 (08:46 +0200)]
arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add Bluetooth support
To enable Bluetooth pwrseq appears to be required for the WCN7850.
Add the nodes from QCP, add the TODO hint for vreg_wcn_0p95 and
vreg_wcn_1p9
Add uart14 for the BT interface.
Akhil P Oommen [Mon, 23 Jun 2025 14:12:09 +0000 (19:42 +0530)]
arm64: dts: qcom: x1p42100: Add GPU support
X1P42100 SoC has a new GPU called Adreno X1-45 which is a smaller
version of Adreno X1-85 GPU. Describe this new GPU and also add
the secure gpu firmware path that should used for X1P42100 CRD.
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> # x1-26-100 Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250623-x1p-adreno-v4-4-d2575c839cbb@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: rename qcs615.dtsi to sm6150.dtsi
The established practice is to have the base DTSI file named after the
base SoC name (see examples of qrb5165-rb5.dts vs sm8250.dtsi,
qrb2210-rb1.dts vs qcm2290.dtsi, qrb4210-rb2.dts vs sm4250.dtsi vs
sm6115.dtsi). Rename the SoC dtsi file accordingly and add "qcom,sm6150"
as a fallback compat string.
arm64: dts: qcom: sdm850-lenovo-yoga-c630: add routing for second USB connector
On Lenovo Yoga C630 second (left) Type-C port is not connected to the
SoC directly. Instead it has a USB hub, which also powers on the onboard
USB camera. Describe these signal lines properly.
IPQ5018 has tsens V1.0 IP with 5 sensors, though 4 are in use.
There is no RPM, so tsens has to be manually enabled. Adding the tsens
and nvmem nodes and adding 4 thermal sensors (zones). The critical trip
temperature is set to 120'C with an action to reboot.
In addition, adding a cooling device to the CPU thermal zone which uses
CPU frequency scaling.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: George Moussalem <george.moussalem@outlook.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[bjorn: Added tsens-v1 fallback compatible, per binding] Link: https://lore.kernel.org/r/20250612-ipq5018-tsens-v13-2-a210f3683240@outlook.com
Neil Armstrong [Mon, 11 Aug 2025 12:25:18 +0000 (14:25 +0200)]
arm64: dts: qcom: sm8650: Flatten the USB nodes
Transition the USB controllers found in the SM8650 SoC to the newly
introduced, flattened representation of the Qualcomm USB block.
The reg and interrupts properties from the usb child node are merged
with their counterpart in the outer node, remaining properties and child
nodes are simply moved.
Neil Armstrong [Mon, 11 Aug 2025 12:25:17 +0000 (14:25 +0200)]
arm64: dts: qcom: sm8550: Flatten the USB nodes
Transition the USB controllers found in the SM8550 SoC to the newly
introduced, flattened representation of the Qualcomm USB block.
The reg and interrupts properties from the usb child node are merged
with their counterpart in the outer node, remaining properties and child
nodes are simply moved.
Wasim Nazir [Sun, 3 Aug 2025 11:01:10 +0000 (16:31 +0530)]
arm64: dts: qcom: lemans: Fix dts inclusion for IoT boards and update memory map
IoT boards currently inherit the automotive memory map, which is not
suitable for their configuration. This leads to incorrect memory layout
and inclusion of unnecessary carveouts.
Use lemans.dtsi as the base for IoT boards to apply the correct memory
map. Include additional DTSI files as needed to complete the board
configuration.
Update 'model' string to represent these boards as 'lemans'.
Wasim Nazir [Sun, 3 Aug 2025 11:01:09 +0000 (16:31 +0530)]
arm64: dts: qcom: lemans: Rename sa8775p-pmics.dtsi to lemans-pmics.dtsi
The existing PMIC DTSI file is named sa8775p-pmics.dtsi, which does not
align with the updated naming convention for Lemans platform components.
This inconsistency can lead to confusion and misalignment with other
platform-specific files.
Rename the file to lemans-pmics.dtsi to reflect the platform naming
convention and improve clarity.
Wasim Nazir [Sun, 3 Aug 2025 11:01:08 +0000 (16:31 +0530)]
arm64: dts: qcom: lemans: Refactor ride/ride-r3 boards based on daughter cards
Ride/Ride-r3 boards used with lemans and derivatives:
- Are composed of multiple daughter cards (SoC-card, display, camera,
ethernet, pcie, sensor, front & backplane, WLAN & BT).
- Across lemans & its derivatives, SoM is changing.
- Across Ride & Ride-r3 board, ethernet card is changing.
Excluding the differences all other cards i.e SoC-card, display,
camera, PCIe, sensor, front & backplane are same across Ride/Ride-r3
boards used with lemans and derivatives.
Describe all the common cards in lemans-ride-common so that it can be
reused for all the variants of ride & ride-r3 platforms in lemans and
derivatives.
Wasim Nazir [Sun, 3 Aug 2025 11:01:07 +0000 (16:31 +0530)]
arm64: dts: qcom: lemans: Separate out ethernet card for ride & ride-r3
Ride & Ride-r3 in lemans/lemans-auto uses different ethernet cards
with different phy capabilities. Separate out the ethernet card
information from main board so that it can be reused for all the
variants of ride & ride-r3 platforms in lemans/lemans-auto.
Wasim Nazir [Sun, 3 Aug 2025 11:01:06 +0000 (16:31 +0530)]
arm64: dts: qcom: lemans: Update memory-map for IoT platforms
The "automotive" memory map is the special case for the Lemans
configuration described by this dtsi, move it aside and use the IoT
memory map as the baseline.
Introduce "lemans-auto" as a derivative of "lemans" that retains the
old automotive memory map to support legacy use cases.
As part of the IoT memory map updates:
- Introduce new carveouts for gunyah_md and pil_dtb. Adjust the size and
base address of the PIL carveout to accommodate these changes.
- Increase the size of the video/camera PIL carveout without affecting
existing functionality.
- Reduce the size of the trusted apps carveout to meet IoT-specific
requirements.
- Remove audio_mdf_mem, tz_ffi_mem, and their corresponding SCM references,
as they are not required for IoT platforms.
Wasim Nazir [Sun, 3 Aug 2025 11:01:05 +0000 (16:31 +0530)]
arm64: dts: qcom: Rename sa8775p SoC to "lemans"
SA8775P, QCS9100 and QCS9075 are all variants of the same die,
collectively referred to as lemans. Most notably, the last of them
has the SAIL (Safety Island) fused off, but remains identical
otherwise.
In an effort to streamline the codebase, rename the SoC DTSI, moving
away from less meaningful numerical model identifiers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Nacked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250803110113.401927-2-wasim.nazir@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: sm8550: stop using SoC-specific genpd indices
The SM8550 has switched to RPMHPD_* indices for RPMh power domains,
however commit e271b59e39a6 ("arm64: dts: qcom: sm8550: Add camera clock
controller") brought some more old-style indices. Convert all of them to
use common RPMh PD indices.
arm64: dts: qcom: sm8250: stop using SoC-specific genpd indices
The SM8250 has switched to RPMHPD_* indices for RPMh power domains,
however commit 86a9264b6c56 ("arm64: dts: qcom: sm8250: Add
interconnects and power-domains to QUPs") brought some more old-style
indices. Convert all of them to use common RPMh PD indices.
Fixes: 86a9264b6c56 ("arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250718-fix-rpmhpd-abi-v2-3-0059edb9ddb3@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: sm8150: use correct PD for DisplayPort controller
Commit 5dd110c90a50 ("arm64: dts: qcom: sm8150: add DisplayPort
controller") specified SM8250_MMCX (= 6) for the DisplayPort power
domain, however on SM8150 this indices maps to SM8150_MX_AO (= 6). Use
correct indice instead (SM8150_MMCX = 9).
arm64: dts: qcom: sa8775p: fix RPMh power domain indices
On SA8775P power domains device doesn't use unufied (RPMHPD_foo) ABI,
but it uses SoC-specific indices (SA8775P_foo). Consequently, all DSP on
that platform are referencing random PDs instead of the expected ones.
Linus Torvalds [Sun, 10 Aug 2025 05:51:37 +0000 (08:51 +0300)]
Merge tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Linus Torvalds [Sun, 10 Aug 2025 05:46:47 +0000 (08:46 +0300)]
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Linus Torvalds [Sun, 10 Aug 2025 05:15:32 +0000 (08:15 +0300)]
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Len Brown [Sun, 10 Aug 2025 01:08:26 +0000 (21:08 -0400)]
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 11 Jun 2025 06:50:26 +0000 (14:50 +0800)]
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
projects / thirdparty / kernel / linux.git / log
