Evaluating the requirement to use a limited RGB quantization range
involves a verification of the output format, among others, but this is
currently performed before actually computing the format, hence relying
on the old connector state.
Move the call to hdmi_is_limited_range() after hdmi_compute_config() to
ensure the verification is done on the updated output format.
Fixes: 027d43590649 ("drm/connector: hdmi: Add RGB Quantization Range to the connector state") Reviewed-by: Dmitry Baryshkov <lumag@kernel.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-1-74c9c4a8ac0c@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When moving the Sitronix DRM drivers and renaming their Kconfig symbols,
the old symbols were kept, aiming to provide a seamless migration path
when running "make olddefconfig" or "make oldconfig".
However, the old compatibility symbols are not visible. Hence unless
they are selected by another symbol (which they are not), they can never
be enabled, and no backwards compatibility is provided.
Drop the broken mechanism and the old symbols.
Fixes: 9b8f32002cddf792 ("drm/sitronix: move tiny Sitronix drivers to their own subdir") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20395b14effe5e2e05a4f0856fdcda51c410329d.1747751592.git.geert+renesas@glider.be Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We cannot use vmap_pfn() in vmap_udmabuf() as it would fail the pfn_valid()
check in vmap_pfn_apply(). This is because vmap_pfn() is intended to be
used for mapping non-struct-page memory such as PCIe BARs. Since, udmabuf
mostly works with pages/folios backed by shmem/hugetlbfs/THP, vmap_pfn()
is not the right tool or API to invoke for implementing vmap.
Previous commit missed two other places that need converting, it only
came out in tests on autobuilders now. Convert the rest of the driver.
Fixes: 68bdc4dc1130 ("MIPS: alchemy: gpio: use new line value setter callbacks") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20250727082442.13182-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Turns out that the AMD variant of the G1 uses different EC registers
than the Intel variant. Differentiate them and apply the correct ones
to the AMD variant.
Fixes: b369395c895b ("platform/x86: oxpec: Add support for the OneXPlayer G1") Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250718163305.159232-1-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The intel_vsec_header information for the crashlog feature is
incorrect.
Update the VSEC header with correct sizing and count.
Since the crashlog entries are "merged" (num_entries = 2), the
separate capabilities entries must be merged as well.
Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-4-michael.j.ruhl@intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
By definition, the Designated Vendor Specific Extended Capability
(DVSEC) revision should be 1.
Add the rev value to be correct.
Fixes: 0c45e76fcc62 ("drm/xe/vsec: Support BMG devices") Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250713172943.7335-3-michael.j.ruhl@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
gbphy_dev_match_id() should be taking a const pointer, as the pointer
passed to it from the container_of() call was const to start with (it
was accidentally cast away with the call.) Fix this all up by correctly
marking the pointer types.
Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *") Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/2025070115-reoccupy-showy-e2ad@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current SDCA Control parsing only checks the deferrable flag for
Read/Write and Dual Ranked controls. However, reads can defer as well as
writes so Read Only controls should also check for the deferrable flag.
Add the handling for this into find_sdca_entity_control().
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250707124155.2596744-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dpm_suspend_start() fails, dpm_resume_end() must be called to
recover devices whose suspend callbacks have been called, but this
does not happen in the KEXEC_JUMP flow's error path due to a confused
goto target label.
Address this by using the correct target label in the goto statement in
question and drop the Resume_console label that is not used any more.
Fixes: 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/2396879.ElGaqSPkdT@rjwysocki.net
[ rjw: Drop unused label and amend the changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com> Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name.
Following warnings can be observed with CHECK_DTBS=y for the RK3528:
rk3528-pinctrl.dtsi:101.36-105.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:108.38-112.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:115.36-119.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:122.36-126.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:129.38-133.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:136.36-140.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:782.32-790.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:793.32-801.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-tx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:804.36-810.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_clk: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:813.36-823.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_bus: Character '_' not recommended in node name
Rename the affected nodes to fix these warnings.
Fixes: a31fad19ae39 ("arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250621113859.2146400-1-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MUX which either outputs DSI or 2nd channel LVDS signals is part of
the SoM. Move the pinmuxing of the GPIO used for controlling the MUX
to the SoM dtsi file.
The reference manual for the i.MX8MN states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
The step_after_suspend_test verifies that the system successfully
suspended and resumed by setting a timerfd and checking whether the
timer fully expired. However, this method is unreliable due to timing
races.
In practice, the system may take time to enter suspend, during which the
timer may expire just before or during the transition. As a result,
the remaining time after resume may show non-zero nanoseconds, even if
suspend/resume completed successfully. This leads to false test failures.
Replace the timer-based check with a read from
/sys/power/suspend_stats/success. This counter is incremented only
after a full suspend/resume cycle, providing a reliable and race-free
indicator.
Also remove the unused file descriptor for /sys/power/state, which
remained after switching to a system() call to trigger suspend [1].
Old revisions of the ROCK 4D board have a dedicated crystal to
supply the RTL8211F PHY's 25MHz clock input. At least some newer
revisions instead use REFCLKO25M_GMAC0_OUT. The DT already has
this half-prepared, but there are some issues:
1. The DT relies on auto-selecting the right PHY driver, which
requires that it works good enough to read the ID registers.
This does not work without the clock, which is handled by
the PHY driver. By updating the compatible to contain the
RTL8211F IDs, so that the operating system can choose the
right PHY driver without relying on a pre-powered PHY.
2. Despite the name REFCLKO25M_GMAC0_OUT could also provide a
different frequency, so ensure it is explicitly set to 25
MHz as expected by the PHY.
3. While at it switch from deprecated "enable-gpio" to standard
"enable-gpios".
When error is injected with the ERR_FORCE register, then this register
is not auto cleared on clearing the ERR_STATUS register. This causes
repeated interrupts on error injection. To fix, set the ERR_FORCE to
zero along with clearing the ERR_STATUS register after handling error.
PWM_3_DSI is used as the HDMI Hot-Plug Detect (HPD) GPIO for the Verdin
DSI-to-HDMI adapter. After the commit 33bab9d84e52 ("arm64: dts: ti:
k3-am62p: fix pinctrl settings"), the pin was incorrectly set as output
without RXACTIVE, breaking HPD detection and display functionality.
The issue was previously hidden and worked by chance before the mentioned
pinctrl fix.
Fix the pinmux configuration to correctly set PWM_3_DSI GPIO as an input.
This commit fixes a typo introduced in commit ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
The compiler does not know that waitid() will only ever return 0 or -1.
If waitid() would return a positive value than waitpid() would return that
same value and *status would not be initialized.
However users calling waitpid() know that the only possible return values
of it are 0 or -1. They therefore might check for errors with
'ret == -1' or 'ret < 0' and use *status otherwise. The compiler will then
warn about the usage of a potentially uninitialized variable.
$ gcc -Wall -Os -Werror -nostdlib -nostdinc -static -Iusr/include -Itools/include/nolibc/ -o /dev/null test.c
test.c: In function ‘main’:
test.c:12:9: error: ‘status’ may be used uninitialized [-Werror=maybe-uninitialized]
12 | printf("status %x\n", status);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
test.c:6:18: note: ‘status’ was declared here
6 | int ret, status;
| ^~~~~~
cc1: all warnings being treated as errors
Avoid the warning by normalizing waitid() errors to '-1' in waitpid().
Fixes: 0c89abf5ab3f ("tools/nolibc: implement waitpid() in terms of waitid()") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20250707-nolibc-waitpid-uninitialized-v1-1-dcd4e70bcd8f@linutronix.de Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The get_pd_power_uw() function can crash with a NULL pointer dereference
when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible
during runtime, causing get_cpu_device() to return NULL, which propagates
through em_cpu_get() and leads to a crash when em_span_cpus() dereferences
the NULL pointer.
Add a NULL check after em_cpu_get() and return 0 if unavailable,
matching the existing fallback behavior in __dtpm_cpu_setup().
Fixes: eb82bace8931 ("powercap/drivers/dtpm: Scale the power with the load") Signed-off-by: Sivan Zohar-Kotzer <sivany32@gmail.com> Link: https://patch.msgid.link/20250701221355.96916-1-sivany32@gmail.com
[ rjw: Drop an excess empty code line ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While the code "looks" correct, the compiler has no way to know that
doing "fun" pointer math like this really isn't a write off the end of
the structure as there is no hint anywhere that the structure has data
at the end of it.
This causes the following build warning:
In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So revert it for now and it can come back in the future in a "sane" way
that either correctly makes the structure know that there is trailing
data, OR just the payload structure is properly referenced and zeroed
out.
Fixes: bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lizhi Xu <lizhi.xu@windriver.com> Link: https://lore.kernel.org/r/20250703171021.0aee1482@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data
ready-to-read response. As a result the intended use to wait until next
data becomes ready does not work.
User space snippet:
struct pollfd pollfd = {
.fd = open("/dev/pps0", O_RDONLY),
.events = POLLIN|POLLERR,
.revents = 0 };
while(1) {
poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
if(revents & EPOLLIN) { // always true
struct pps_fdata fdata;
memset(&fdata, 0, sizeof(memdata));
ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
}
}
Lets remember the last fetch event counter and compare this value
in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
Reword and expand the invariant documentation for `MiscDeviceRegistration`
to clarify what it means for the inner device to be "registered".
It expands to explain:
- `inner` points to a `miscdevice` registered via `misc_register`.
- This registration stays valid for the entire lifetime of the object.
- Deregistration is guaranteed on `Drop`, via `misc_deregister`.
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250623220958.280424-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code should be safe as the PDE widget only registers for the
two events handled in the switch statement. However, it is causing a
smatch warning and also is a little fragile to future code changes, add
a default case to avoid the warning and make the code more robust.
Fixes: 2c8b3a8e6aa8 ("ASoC: SDCA: Create DAPM widgets and routes from DisCo") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250624122844.2761627-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The binary attribute const changes recently for the sram driver were
made in a way that hid the fact that we would be casting a const pointer
to a non-const one. So explicitly make the cast so that it is obvious
and preserve the const pointer in the sram_reserve_cmp() function.
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/ Fixes: fee681646fc8 ("spi: stm32: disable device mode with st,stm32f4-spi compatible") Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root-cause of this is the IRQF_NO_THREAD flag used by the intel-pinctrl
code. Setting IRQF_NO_THREAD requires all interrupt handlers for GPIO ISRs
to use raw-spinlocks only since normal spinlocks can sleep in PREEMPT-RT
kernels and with IRQF_NO_THREAD the interrupt handlers will always run in
an atomic context [1].
vsc_tp_isr() calls wake_up(&tp->xfer_wait), which uses a regular spinlock,
breaking the raw-spinlocks only rule for Intel GPIO ISRs.
Make vsc_tp_isr() run as threaded ISR instead of as hard ISR to fix this.
The event_notify callback in some cases calls vsc_tp_xfer(), which checks
tp->assert_cnt and waits for it through the tp->xfer_wait wait-queue.
And tp->assert_cnt is increased and the tp->xfer_wait queue is woken o
from the interrupt handler.
So the interrupt handler which is running the event callback is waiting for
itself to signal that it can continue.
This happens to work because the event callback runs from the threaded
ISR handler and while that is running the hard ISR handler will still
get called a second / third time for further interrupts and it is the hard
ISR handler which does the atomic_inc() and wake_up() calls.
But having the threaded ISR handler wait for its own interrupt to trigger
again is not how a threaded ISR handler is supposed to be used.
Move the running of the event callback from a threaded interrupt handler
to a workqueue since a threaded ISR should not wait for events from its
own interrupt.
This is a preparation patch for moving the atomic_inc() and wake_up() calls
to the threaded ISR handler, which is necessary to fix a locking issue.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250623085052.12347-9-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make mei_vsc_remove() properly unset the callback to avoid a dead callback
sticking around after probe errors or unbinding of the platform driver.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250623085052.12347-8-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mei_vsc_hw_reset() gets called from mei_start() and mei_stop() in
the latter case we do not need to re-init the VSC by calling vsc_tp_init().
mei_stop() only happens on shutdown and driver unbind. On shutdown we
don't need to load + boot the firmware and if the driver later is
bound to the device again then mei_start() will do another reset.
The intr_enable flag is true when called from mei_start() and false on
mei_stop(). Skip vsc_tp_init() when intr_enable is false.
This avoids unnecessarily uploading the firmware, which takes 11 seconds.
This change reduces the poweroff/reboot time by 11 seconds.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250623085052.12347-3-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix memory leak and call ucsi_destroy() from the driver's remove
function and probe's error path in order to remove debugfs files and
free the memory. Also call yoga_c630_ec_unregister_notify() in the
probe's error path.
After a recent restructuring of the ITS mitigation, RSB stuffing can no longer
be enabled in eIBRS+Retpoline mode. Before ITS, retbleed mitigation only
allowed stuffing when eIBRS was not enabled. This was perfectly fine since
eIBRS mitigates retbleed.
However, RSB stuffing mitigation for ITS is still needed with eIBRS. The
restructuring solely relies on retbleed to deploy stuffing, and does not allow
it when eIBRS is enabled. This behavior is different from what was before the
restructuring. Fix it by allowing stuffing in eIBRS+retpoline mode also.
The retbleed select function leaves the mitigation to AUTO in some cases.
Moreover, the update function can also set the mitigation to AUTO. This
is inconsistent with other mitigations and requires explicit handling of
AUTO at the end of update step.
Make sure a mitigation gets selected in the select step, and do not change
it to AUTO in the update step. When no mitigation can be selected leave it
to NONE, which is what AUTO was getting changed to in the end.
Sustained frequency when greater than or equal to 4Ghz on 64-bit devices
currently result in marking all frequencies as turbo. Address the turbo
frequency selection bug by fixing the truncation.
Fixes: a897575e79d7 ("firmware: arm_scmi: Add support for marking certain frequencies as turbo") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Message-Id: <20250514214719.203607-1-quic_sibis@quicinc.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An earlier patch marked one of the two CPU masks as 'static' to reduce stack
usage, but if CONFIG_NR_CPUS is large enough, the function still produces
a warning for compile testing:
drivers/cpufreq/armada-8k-cpufreq.c: In function 'armada_8k_cpufreq_init':
drivers/cpufreq/armada-8k-cpufreq.c:203:1: error: the frame size of 1416 bytes is larger than 1408 bytes [-Werror=frame-larger-than=]
Normally this should be done using alloc_cpumask_var(), but since the
driver already has a static mask and the probe function is not called
concurrently, use the same trick for both.
Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.
For the ICSSG PHYs to operate correctly, a 25 MHz reference clock must
be supplied on CLKOUT0. Previously, our bootloader configured this
clock, which is why the PRU Ethernet ports appeared to work, but the
change never made it into the device tree.
Add clock properties to make EXT_REFCLK1.CLKOUT0 output a 25MHz clock.
dtc complains with the following message for DTSes which use the ISP:
arch/arm64/boot/dts/rockchip/px30.dtsi:1272.19-1276.6: Warning (graph_child_address): /isp@ff4a0000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Typically, it is expected from the device DTS(I) to update the SoC DTSI
nodes if they have more than one endpoint, so let's assume there's only
one endpoint in port@0 by default, instead of forcing board DTS(I)s to
/delete-property/ address-cells and size-cells to make dtc happy.
Because PX30 PP1516/EVB's endpoint@0 is the only endpoint and
considering its parent node now has no address-cells property, dtc
complains (same messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#size-cells' is -1, must be 0
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (graph_child_address): Failed prerequisite 'graph_endpoint'
so we fix that by removing the reg property. dtc still complains (same
messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-450.6: Warning (unit_address_vs_reg): /isp@ff4a0000/ports/port@0/endpoint@0: node has a unit name, but no reg or ranges property
so we also remove the @0 suffix off the node name.
Fixes: 8df7b4537dfb ("arm64: dts: rockchip: add isp node for px30") Fixes: 474a77395be2 ("arm64: dts: rockchip: hook up camera on px30-evb") Fixes: 56198acdbf0d ("arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants") Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-1-de1bf87e0732@cherry.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When multiple Apple devices are connected concurrently, the
apple-mfi-fastcharge driver fails to probe the subsequent devices with
the following error:
sysfs: cannot create duplicate filename '/class/power_supply/apple_mfi_fastcharge'
apple-mfi-fastcharge 5-2.4.3.3: probe of 5-2.4.3.3 failed with error -17
This happens because the driver uses a fixed power supply name
("apple_mfi_fastcharge") for all devices, causing a sysfs name
conflict when a second device is connected.
Fix this by generating unique names using the USB bus and device
number (e.g., "apple_mfi_fastcharge_5-12"). This ensures each
connected device gets a unique power supply entry in sysfs.
The change requires storing a copy of the power_supply_desc structure
in the per-device mfi_device struct, since the name pointer needs to
remain valid for the lifetime of the power supply registration.
The variable `of_match` was incorrectly declared as a `bool`.
It is assigned the return value of of_match_device(), which is a pointer of
type `const struct of_device_id *`.
Address and size-cells are 1 and the ftm timer node takes two address
spaces in "reg" property, so this should be in two <> tuples. Change
has no functional impact, but original code is confusing/less readable.
After the commit 0014f65e3df0 ("pm: cpupower: remove hard-coded
topology depth values"), "cpupower monitor" output ceased to print the
CORE and the CPU fields on a multi-socket platform.
The reason for this is that the patch changed the behaviour to break
out of the switch-case after printing the PKG details, while prior to
the patch, the CORE and the CPU details would also get printed since
the "if" condition check would pass for any level whose topology depth
was lesser than that of a package.
Fix this ensuring all the details below a desired topology depth are
printed in the cpupower monitor output.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 and qcom,sps-dma@7ac4000 [1] so adding
"qcom,controlled-remotely" upstream matches the behavior of the
downstream/vendor kernel.
In preparation for switching to the architected timer as the primary
clockevents device, mark the cpuidle nodes with the 'local-timer-stop'
property to indicate that an alternative clockevents device must be
used for waking up from the "c2" idle state.
Signed-off-by: Will Deacon <willdeacon@google.com>
[Original commit from https://android.googlesource.com/kernel/gs/+/a896fd98638047989513d05556faebd28a62b27c] Signed-off-by: Will McVicker <willmcvicker@google.com> Reviewed-by: Youngmin Nam <youngmin.nam@samsung.com> Tested-by: Youngmin Nam <youngmin.nam@samsung.com> Fixes: ea89fdf24fd9 ("arm64: dts: exynos: google: Add initial Google gs101 SoC support") Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20250611-gs101-cpuidle-v2-1-4fa811ec404d@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Disable the CTI device of the camera block to prevent potential NoC errors
during AMBA bus device matching.
The clocks for the Qualcomm Debug Subsystem (QDSS) are managed by aoss_qmp
through a mailbox. However, the camera block resides outside the AP domain,
meaning its QDSS clock cannot be controlled via aoss_qmp.
Fixes: bf469630552a ("arm64: dts: qcom: qcs615: Add coresight nodes") Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250611030003.3801-1-jie.gan@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
An infinite loop has been created by the Coresight devices. When only a
source device is enabled, the coresight_find_activated_sysfs_sink function
is recursively invoked in an attempt to locate an active sink device,
ultimately leading to a stack overflow and system crash. Therefore, disable
the replicator1 to break the infinite loop and prevent a potential stack
overflow.
The QMI_DATA_LEN type may have different sizes. Taking the element's
address of that type and interpret it as a smaller sized ones works fine
for little endian platforms but not for big endian ones. Instead use
temporary variables of smaller sized types and cast them correctly to
support big endian platforms.
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
The AFE DMA hardware supports up to 34 bits for DMA addresses. This is
missing from the driver and prevents reserved memory regions from
working properly when the allocated region is above the 4GB line.
Fill in the related register offsets for each DAI, and also set the
DMA mask. Also fill in the LSB end register offsets for completeness.
Fixes: a94aec035a12 ("ASoC: mediatek: mt8183: add platform driver") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20250612074901.4023253-8-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit 32c9c06adb5b ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb5b ("ASoC: mediatek: disable buffer pre-allocation") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the function to dynamically allocate it instead.
There is probably a better way to do it since only two integer fields
inside of that structure are actually used, but this is the simplest
rework for the moment.
Fixes: 783db6851c18 ("ASoC: ops: Enforce platform maximum on initial value") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250610093057.2643233-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
