list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver") Signed-off-by: Zhen Ni <zhen.ni@easystack.cn> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b6066 ("icmp: introduce helper for nat'd source address in network device context") Signed-off-by: Fabian Bläse <fabian@blaese.de> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dsp_hwec_enable() allocates dup pointer by kstrdup(arg),
but then it updates dup variable by strsep(&dup, ",").
As a result when it calls kfree(dup), the dup variable may be
a modified pointer that no longer points to the original allocated
memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c22999
("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a4381618262 ("mISDN: Remove VLAs") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250828081457.36061-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as
the register address to GetByte(), instead of fetching the register
value and OR-ing it with FullDuplex. This results in an invalid
register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex
before writing it back.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250827192645.658496-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The helper registration return value is passed-through by module_init
callbacks which modprobe confuses with the harmless -EEXIST returned
when trying to load an already loaded module.
Make sure modprobe fails so users notice their helper has not been
registered and won't work.
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer.
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Cc: stable@vger.kernel.org # v5.9+ Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context: removed metadata health tracking calls ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default codec for speaker amp's DAI Link is max98373 and will be
overwritten in probe function if the board id is sof_da7219_mx98360a.
However, the probe function does not do it because the board id is
changed in earlier commit.
Fixes: 1cc04d195dc2 ("ASoC: Intel: sof_da7219_max98373: shrink platform_id below 20 characters") Signed-off-by: Brent Lu <brent.lu@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210726094525.5748-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The upstream commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f ("drm/dp:
Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") the
reverted commit backported causes a regression, on one eDP panel at
least resulting in display flickering, described in detail at the Link:
below. The issue fixed by the upstream commit will need a different
solution, revert the backport for now.
When a user requests more than 60 bytes of data the MCP2221 must chunk
the data in chunks up to 60 bytes long (see command/response code 0x40
in the datasheet).
In order to signal that the device has more data the (undocumented) byte
at byte index 2 of the Get I2C Data response uses the value 0x54. This
contrasts with the case for the final data chunk where the value
returned is 0x55 (MCP2221_I2C_READ_COMPL). The fact that 0x55 was not
returned in the response was interpreted by the driver as a failure
meaning that all reads of more than 60 bytes would fail.
Add support for reads that are split over multiple chunks by looking for
the response code indicating that more data is expected and continuing
the read as the code intended. Some timing delays are required to ensure
the chip has time to refill its FIFO as data is read in from the I2C
bus. This timing has been tested in my system when configured for bus
speeds of 50KHz, 100KHz, and 400KHz and operates well.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Fixes: 67a95c21463d0 ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag] Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the initial commit of this driver the I2C bus speed has been
reconfigured for every single transfer. This is despite the fact that we
never change the speed and it is never "lost" by the chip.
Upon investigation we find that what was really happening was that the
setting of the bus speed had the side effect of cancelling a previous
failed command if there was one, thereby freeing the bus. This is the
part that was actually required to keep the bus operational in the face
of failed commands.
Instead of always setting the speed, we now correctly cancel any failed
commands as they are detected. This means we can just set the bus speed
at probe time and remove the previous speed sets on each transfer.
This has the effect of improving performance and reducing the number of
commands required to complete transfers.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Fixes: 67a95c21463d ("HID: mcp2221: add usb to i2c-smbus host bridge")
[romain.sioen@microchip.com: backport to stable, up to 6.8. Add "Fixes" tag] Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org Fixes: c586f30bf74c ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp") Signed-off-by: James Jones <jajones@nvidia.com> Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DMA_DIRECT_REMAP is enabled, atomic pool pages are
remapped via dma_common_contiguous_remap() using the supplied
pgprot. Currently, the mapping uses
pgprot_dmacoherent(PAGE_KERNEL), which leaves the memory encrypted
on systems with memory encryption enabled (e.g., ARM CCA Realms).
This can cause the DMA layer to fail or crash when accessing the
memory, as the underlying physical pages are not configured as
expected.
Fix this by requesting a decrypted mapping in the vmap() call:
pgprot_decrypted(pgprot_dmacoherent(PAGE_KERNEL))
This ensures that atomic pool memory is consistently mapped
unencrypted.
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev()
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels.
If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become
negative, leadings to oob. The issue can be triggered by parallel
lookups using invalid filename:
T1 T2
lookup_open
->lookup
simple_lookup
d_add
// invalid dentry is added to hash list
lookup_open
d_alloc_parallel
__d_lookup_rcu
__d_lookup_rcu_op_compare
hlist_bl_for_each_entry_rcu
// invalid dentry can be retrieved
->d_compare
efivarfs_d_compare
// oob
Fix it by checking 'guid' before cmp.
Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive") Signed-off-by: Li Nan <linan122@huawei.com> Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
`McstFramesRcvdOk` counts the number of received multicast packets, and
it reports the value correctly.
However, reading `McstFramesRcvdOk` clears the register to zero. As a
result, the driver was reporting only the packets since the last read,
instead of the accumulated total.
Fix this by updating the multicast statistics accumulatively instaed of
instantaneously.
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f42809185896 ("Bluetooth: Simplify num_comp_pkts_evt function") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Commit 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes")
introduced a regression where local-broadcast packets would have their
gateway set in __mkroute_output, which was caused by fi = NULL being
removed.
Fix this by resetting the fib_info for local-broadcast packets. This
preserves the intended changes for directed-broadcast packets.
Cc: stable@vger.kernel.org Fixes: 9e30ecf23b1b ("net: ipv4: fix incorrect MTU in broadcast routes") Reported-by: Brett A C Sheffield <bacs@librecast.net> Closes: https://lore.kernel.org/regressions/20250822165231.4353-4-bacs@librecast.net Signed-off-by: Oscar Maes <oscmaes92@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250827062322.4807-1-oscmaes92@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When operating on struct vhost_net_ubuf_ref, the following execution
sequence is theoretically possible:
CPU0 is finalizing DMA operation CPU1 is doing VHOST_NET_SET_BACKEND
// ubufs->refcount == 2
vhost_net_ubuf_put() vhost_net_ubuf_put_wait_and_free(oldubufs)
vhost_net_ubuf_put_and_wait()
vhost_net_ubuf_put()
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 1
int r = atomic_sub_return(1, &ubufs->refcount);
// r = 0
wait_event(ubufs->wait, !atomic_read(&ubufs->refcount));
// no wait occurs here because condition is already true
kfree(ubufs);
if (unlikely(!r))
wake_up(&ubufs->wait); // use-after-free
This leads to use-after-free on ubufs access. This happens because CPU1
skips waiting for wake_up() when refcount is already zero.
To prevent that use a read-side RCU critical section in vhost_net_ubuf_put(),
as suggested by Hillf Danton. For this lock to take effect, free ubufs with
kfree_rcu().
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request().
Reported-by: Jeff Layton <jlayton@kernel.org> Tested-by: Joe Quanaim <jdq@meta.com> Tested-by: Andrew Steffen <aksteffen@meta.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Fixes: bd37d6fce184 ("NFSv4: Convert nfs_lock_and_join_requests() to use nfs_page_find_head_request()") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests to
prepare for future changes to this code, and move the helpers to write.c
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot")
resctrl_cpu_detect() has been moved from common CPU initialization code to
the vendor-specific BSP init helper, while Hygon didn't put that call in their
code.
This triggers a division by zero fault during early booting stage on our
machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries
to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale.
Add the missing resctrl_cpu_detect() in the Hygon BSP init helper.
The SCSI sysfs attributes "supported_mode" and "active_mode" do not
define a store method and thus cannot be modified. Correct the
DEVICE_ATTR() call for these two attributes to not include S_IWUSR to
allow write access as they are read-only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
When building on ARCH=um (which does not set HAS_IOMEM), kconfig
reports an unmet dependency caused by PINCTRL_STMFX. It selects
MFD_STMFX, which depends on HAS_IOMEM. To stop this warning,
PINCTRL_STMFX should also depend on HAS_IOMEM.
kconfig warning:
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y]
First of all, tell it how many slots do we want, not which slot
is wanted. It makes one caller (dup_fd()) more straightforward
and doesn't harm another (expand_fdtable()).
Furthermore, make it return ERR_PTR() on failure rather than
returning NULL. Simplifies the callers.
Simplify the size calculation, while we are at it - note that we
always have slots_wanted greater than BITS_PER_LONG. What the
rules boil down to is
* use the smallest power of two large enough to give us
that many slots
* on 32bit skip 64 and 128 - the minimal capacity we want
there is 256 slots (i.e. 1Kb fd array).
* on 64bit don't skip anything, the minimal capacity is
128 - and we'll never be asked for 64 or less. 128 slots means
1Kb fd array, again.
* on 128bit, if that ever happens, don't skip anything -
we'll never be asked for 128 or less, so the fd array allocation
will be at least 2Kb.
Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enhance validation to support for reject from inet ingress chains.
Note that, reject from inet ingress and netdev ingress differ.
Reject packets from inet ingress are sent through ip_local_out() since
inet reject emulates the IP layer receive path. So the reject packet
follows to classic IP output and postrouting paths.
The reject action from netdev ingress assumes the packet not yet entered
the IP layer, so the reject packet is sent through dev_queue_xmit().
Therefore, reject packets from netdev ingress do not follow the classic
IP output and postrouting paths.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 91a79b792204 ("netfilter: nf_reject: don't leak dst refcount for loopback packets") Signed-off-by: Sasha Levin <sashal@kernel.org>
Bridge family is using the same static init and dump function as inet.
This patch removes duplicate code unifying these functions body into
nft_reject.c so they can be reused in the rest of families supporting
reject verdict.
Signed-off-by: Jose M. Guisado Gomez <guigom@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 91a79b792204 ("netfilter: nf_reject: don't leak dst refcount for loopback packets") Signed-off-by: Sasha Levin <sashal@kernel.org>
When kernel lockdown is active, debugfs_locked_down() blocks access to
hypfs files that register ioctl callbacks, even if the ioctl interface
is not required for a function. This unnecessarily breaks userspace
tools that only rely on read operations.
Resolve this by registering a minimal set of file operations during
lockdown, avoiding ioctl registration and preserving access for affected
tooling.
Note that this change restores hypfs functionality when lockdown is
active from early boot (e.g. via lockdown=integrity kernel parameter),
but does not apply to scenarios where lockdown is enabled dynamically
while Linux is running.
Tested-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down") Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, hypfs registers ioctl callbacks for all debugfs files,
despite only one file requiring them. This leads to unintended exposure
of unused interfaces to user space and can trigger side effects such as
restricted access when kernel lockdown is enabled.
Restrict ioctl registration to only those files that implement ioctl
functionality to avoid interface clutter and unnecessary access
restrictions.
Tested-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down") Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
The following setup can trigger a WARNING in htb_activate due to
the condition: !cl->leaf.q->q.qlen
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 \
htb rate 64bit
tc qdisc add dev lo parent 1:1 handle f: \
cake memlimit 1b
ping -I lo -f -c1 -s64 -W0.001 127.0.0.1
This is because the low memlimit leads to a low buffer_limit, which
causes packet dropping. However, cake_enqueue still returns
NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an
empty child qdisc. We should return NET_XMIT_CN when packets are
dropped from the same tin and flow.
I do not believe return value of NET_XMIT_CN is necessary for packet
drops in the case of ack filtering, as that is meant to optimize
performance, not to signal congestion.
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: William Liu <will@willsroot.io> Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250819033601.579821-1-will@willsroot.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Resolve the budget negative overflow which leads to returning true in
ixgbe_xmit_zc even when the budget of descs are thoroughly consumed.
Before this patch, when the budget is decreased to zero and finishes
sending the last allowed desc in ixgbe_xmit_zc, it will always turn back
and enter into the while() statement to see if it should keep processing
packets, but in the meantime it unexpectedly decreases the value again to
'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns
true, showing 'we complete cleaning the budget'. That also means
'clean_complete = true' in ixgbe_poll.
The true theory behind this is if that budget number of descs are consumed,
it implies that we might have more descs to be done. So we should return
false in ixgbe_xmit_zc to tell napi poll to find another chance to start
polling to handle the rest of descs. On the contrary, returning true here
means job done and we know we finish all the possible descs this time and
we don't intend to start a new napi poll.
It is apparently against our expectations. Please also see how
ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement
to make sure the budget can be decreased to zero at most and the negative
overflow never happens.
The patch adds 'likely' because we rarely would not hit the loop condition
since the standard budget is 256.
Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Priya Singh <priyax.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250819222000.3504873-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c9c ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: Minhong He <heminhong@kylinos.cn> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
By default, the device does not forward IPv4 packets with a link-local
source IP (i.e., 169.254.0.0/16). This behavior does not align with the
kernel which does forward them.
Fix by instructing the device to forward such packets instead of
dropping them.
Fixes: ca360db4b825 ("mlxsw: spectrum: Disable DIP_LINK_LOCAL check in hardware pipeline") Reported-by: Zoey Mertes <zoey@cloudflare.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/6721e6b2c96feb80269e72ce8d0b426e2f32d99c.1755174341.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length.
Reported-by: Simcha Kosman <simcha.kosman@cyberark.com> Closes: https://lore.kernel.org/all/AS8P193MB2271C4B24BCEDA31830F37AE84A52@AS8P193MB2271.EURP193.PROD.OUTLOOK.COM Fixes: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Ankit Soni <Ankit.Soni@amd.com> Link: https://lore.kernel.org/r/20250804154023.work.970-kees@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem
and hotplug lock order"), the ordering of cpu hotplug lock
and cpuset_mutex had been reversed. That patch correctly
used the cpuslocked version of the static branch API to enable
cpusets_pre_enable_key and cpusets_enabled_key, but it didn't do the
same for cpusets_insane_config_key.
The cpusets_insane_config_key can be enabled in the
check_insane_mems_config() which is called from update_nodemask()
or cpuset_hotplug_update_tasks() with both cpu hotplug lock and
cpuset_mutex held. Deadlock can happen with a pending hotplug event that
tries to acquire the cpu hotplug write lock which will block further
cpus_read_lock() attempt from check_insane_mems_config(). Fix that by
switching to use static_branch_enable_cpuslocked().
Fixes: d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock order") Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There was a report that starting an Ubuntu in docker while using cpuset
to bind it to movable nodes (a node only has movable zone, like a node
for hotplug or a Persistent Memory node in normal usage) will fail due
to memory allocation failure, and then OOM is involved and many other
innocent processes got killed.
oom-kill:constraint=CONSTRAINT_CPUSET,nodemask=(null),cpuset=docker-9976a269caec812c134fa317f27487ee36e1129beba7278a463dd53e5fb9997b.scope,mems_allowed=4,global_oom,task_memcg=/system.slice/containerd.service,task=containerd,pid=4100,uid=0
Out of memory: Killed process 4100 (containerd) total-vm:4077036kB, anon-rss:51184kB, file-rss:26016kB, shmem-rss:0kB, UID:0 pgtables:676kB oom_score_adj:0
oom_reaper: reaped process 8248 (docker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
oom_reaper: reaped process 2054 (node_exporter), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
oom_reaper: reaped process 1452 (systemd-journal), now anon-rss:0kB, file-rss:8564kB, shmem-rss:4kB
oom_reaper: reaped process 2146 (munin-node), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
oom_reaper: reaped process 8291 (runc:[2:INIT]), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
The reason is that in this case, the target cpuset nodes only have
movable zone, while the creation of an OS in docker sometimes needs to
allocate memory in non-movable zones (dma/dma32/normal) like
GFP_HIGHUSER, and the cpuset limit forbids the allocation, then
out-of-memory killing is involved even when normal nodes and movable
nodes both have many free memory.
The OOM killer cannot help to resolve the situation as there is no
usable memory for the request in the cpuset scope. The only reasonable
measure to take is to fail the allocation right away and have the caller
to deal with it.
So add a check for cases like this in the slowpath of allocation, and
bail out early returning NULL for the allocation.
As page allocation is one of the hottest path in kernel, this check will
hurt all users with sane cpuset configuration, add a static branch check
and detect the abnormal config in cpuset memory binding setup so that
the extra check cost in page allocation is not paid by everyone.
[thanks to Micho Hocko and David Rientjes for suggesting not handling
it inside OOM code, adding cpuset check, refining comments]
Link: https://lkml.kernel.org/r/1632481657-68112-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 65f97cc81b0a ("cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key") Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com Fixes: 8c9af478c06b ("ftrace: Handle commands when closing set_ftrace_filter file") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several places in the trace.c file there's a goto out where the out is
simply a return. There's no reason to jump to the out label if it's not
doing any more logic but simply returning from the function.
Replace the goto outs with a return and remove the out labels.
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
__ADDRESSABLE_ASM_STR() is where the necessary stringification happens.
As long as "sym" doesn't contain any odd characters, no quoting is
required for its use with .quad / .long. In fact the quotation gets in
the way with gas 2.25; it's only from 2.26 onwards that quoted symbols
are half-way properly supported.
However, assembly being different from C anyway, drop
__ADDRESSABLE_ASM_STR() and its helper macro altogether. A simple
.global directive will suffice to get the symbol "declared", i.e. into
the symbol table. While there also stop open-coding STATIC_CALL_TRAMP()
and STATIC_CALL_KEY().
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <609d2c74-de13-4fae-ab1a-1ec44afb948d@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.sh, because some refactoring have been done
later on: commit 3188309c8ceb ("selftests: mptcp: netlink:
add 'limits' helpers") and commit c99d57d0007a ("selftests: mptcp: use
pm_nl endpoint ops") are not in this version. The same operation can
still be done at the same place, without using the new helper. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
When config CONFIG_USB_DWC3_DUAL_ROLE is selected, and trigger system
to enter suspend status with below command:
echo mem > /sys/power/state
There will be a deadlock issue occurring. Detailed invoking path as
below:
dwc3_suspend_common()
spin_lock_irqsave(&dwc->lock, flags); <-- 1st
dwc3_gadget_suspend(dwc);
dwc3_gadget_soft_disconnect(dwc);
spin_lock_irqsave(&dwc->lock, flags); <-- 2nd
This issue is exposed by commit c7ebd8149ee5 ("usb: dwc3: gadget: Fix
NULL pointer dereference in dwc3_gadget_suspend") that removes the code
of checking whether dwc->gadget_driver is NULL or not. It causes the
following code is executed and deadlock occurs when trying to get the
spinlock. In fact, the root cause is the commit 5265397f9442("usb: dwc3:
Remove DWC3 locking during gadget suspend/resume") that forgot to remove
the lock of otg mode. So, remove the redundant lock of otg mode during
gadget suspend/resume.
Remove the need for making dwc3_gadget_suspend() and dwc3_gadget_resume()
to be called in a spinlock, as dwc3_gadget_run_stop() could potentially
take some time to complete.
DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue.
But blk-mq's unquiesce may come from outside events, such as elevator
switch, updating nr_requests or others, and request may come during
suspend, so simply ask for blk-mq to requeue it.
Fixes one kernel panic issue when running updating nr_requests and
dm-mpath suspend/resume stress test.
Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the definitions of struct dm_target_io, struct dm_io and the bits
of the flags field of struct mapped_device from dm.c to dm-core.h to
make them usable from dm-zone.c. For the same reason, declare
dec_pending() in dm-core.h after renaming it to dm_io_dec_pending().
And for symmetry of the function names, introduce the inline helper
dm_io_inc_pending() instead of directly using atomic_inc() calls.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[Shivani: Modified to apply on 5.10.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.
Clamp the value if the user provides a param that will result in an invalid
fps.
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data().
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
[ call to drm_dp_dpcd_access() instead of drm_dp_dpcd_probe() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 6 which
is already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 6 display clock.
Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris") Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408) Cc: stable@vger.kernel.org
[ `MIN` => `min` ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure the interrupt handler is initialized before the interrupt is
registered.
If the IRQ is registered before hfi_create(), it's possible that an
interrupt fires before the handler setup is complete, leading to a NULL
dereference.
This error condition has been observed during system boot on Rb3Gen2.
Smatch is warning that:
drivers/media/platform/qcom/venus/hfi_venus.c:1100 venus_isr() warn: variable dereferenced before check 'hdev' (see line 1097)
The logic basically does:
hdev = to_hfi_priv(core);
with is translated to:
hdev = core->priv;
If the IRQ code can receive a NULL pointer for hdev, there's
a bug there, as it will first try to de-reference the pointer,
and then check if it is null.
After looking at the code, it seems that this indeed can happen:
Basically, the venus IRQ thread is started with:
devm_request_threaded_irq()
So, it will only be freed after the driver unbinds.
In order to prevent the IRQ code to work with freed data,
the logic at venus_hfi_destroy() sets core->priv to NULL,
which would make the IRQ code to ignore any pending IRQs.
There is, however a race condition, as core->priv is set
to NULL only after being freed. So, we need also to move the
core->priv = NULL to happen earlier.
It's a common pattern in drivers to free the control handler's resources
and then return the handler's error code on drivers' error handling paths.
Alas, the v4l2_ctrl_handler_free() function also zeroes the error field,
effectively indicating successful return to the caller.
There's no apparent need to touch the error field while releasing the
control handler's resources and cleaning up stale pointers. Not touching
the handler's error field is a more certain way to address this problem
than changing all the users, in which case the pattern would be likely to
re-emerge in new drivers.
Do just that, don't touch the control handler's error field in
v4l2_ctrl_handler_free().
Fixes: 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[ v4l2-ctrls.c => v4l2-ctrls-core.c ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When v4l2_ctrl_request_complete() is called and there is no control
handler object found in the request, then create such an object so
that all controls at completion state can be stored and are available
to userspace.
Otherwise any attempt by userspace to read the completed request data
will fail.
If allocating the control handler object failed, then indicate that
by returning ENOMEM when attempting to get the controls from the
completed request instead of returning ENOENT.
Add the missing memory barriers to make sure that destination ring
descriptors are read before updating the tail pointer (and passing
ownership to the device) to avoid memory corruption on weakly ordered
architectures like aarch64 when the ring is full.
The memory barrier dma_mb() is introduced by commit a76a37777f2c
("iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer"),
which is used to ensure that prior (both reads and writes) accesses
to memory by a CPU are ordered w.r.t. a subsequent MMIO write.
Reviewed-by: Arnd Bergmann <arnd@arndb.de> # for asm-generic Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20220523113126.171714-2-wangkefeng.wang@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: aa6956150f82 ("wifi: ath11k: fix dest ring-buffer corruption when ring is full") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thus far only smp_*() barriers had been defined by asm-generic/barrier.h
based on __smp_*() barriers, because the !SMP case is usually generic.
With the introduction of instrumentation, it also makes sense to have
asm-generic/barrier.h assist in the definition of instrumented versions
of mb(), rmb(), wmb(), dma_rmb(), and dma_wmb().
Because there is no requirement to distinguish the !SMP case, the
definition can be simpler: we can avoid also providing fallbacks for the
__ prefixed cases, and only check if `defined(__<barrier>)`, to finally
define the KCSAN-instrumented versions.
This also allows for the compiler to complain if an architecture
accidentally defines both the normal and __ prefixed variant.
Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: aa6956150f82 ("wifi: ath11k: fix dest ring-buffer corruption when ring is full") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
according to my tests with a signal analyser and also the documentation.
The current algorithm doesn't consider the `+ 1` part and so configures
slightly too high periods. The same issue exists for the duty cycle
setting. So subtract 1 from both the register values for period and
duty cycle. If period is 0, bail out, if duty_cycle is 0, just disable
the PWM which results in a constant low output.
Stop handling the clocks in pwm_mediatek_enable() and
pwm_mediatek_disable(). This is a preparing change for the next commit
that requires that clocks and the enable bit are handled separately.
Also move these two functions a bit further up in the source file to
make them usable in pwm_mediatek_config(), which is needed in the next
commit, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/55c94fe2917ece152ee1e998f4675642a7716f13.1753717973.git.u.kleine-koenig@baylibre.com Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Stable-dep-of: f21d136caf81 ("pwm: mediatek: Fix duty and period setting") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: f21d136caf81 ("pwm: mediatek: Fix duty and period setting") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
