uros [Thu, 5 May 2016 22:48:29 +0000 (22:48 +0000)]
PR target/70873
* config/i386/i386-protos.h (ix86_standard_x87sse_constant_load_p):
New prototype.
* config/i386/i386.c (ix86_standard_x87sse_constant_load_p): New.
* config/i386/i386.md (push mem splitter): Use find_constant_src in
the splitter condition.
(FP load splitter): Use ix86_standard_x87sse_constant_load_p in
the splitter condition.
(FP float_extend load splitter): Ditto.
uros [Thu, 5 May 2016 20:33:42 +0000 (20:33 +0000)]
* config/i386/i386.md (peehole2 patterns): Change true_regnum
to REGNUM in all peephole2 patterns.
(post-reload splitters): Change true_regnum to REGNUM in
post-reload splitters.
(zero_extend splitters): Use general_reg_operand and
nonimmediate_gr_operand predicates.
jakub [Thu, 5 May 2016 13:31:02 +0000 (13:31 +0000)]
* openmp.c (gfc_match_omp_clauses): Restructuralize, so that clause
parsing is done in a big switch based on gfc_peek_ascii_char and
individual clauses under their first letters are sorted too.
jakub [Thu, 5 May 2016 13:26:59 +0000 (13:26 +0000)]
* c-parser.c (c_parser_switch_statement): Add IF_P argument,
parse it through to c_parser_c99_block_statement.
(c_parser_statement_after_labels): Adjust c_parser_switch_statement
caller.
* parser.c (cp_parser_selection_statement): For RID_SWITCH,
pass if_p instead of NULL to cp_parser_implicitly_scoped_statement.
amodra [Thu, 5 May 2016 00:07:27 +0000 (00:07 +0000)]
[RS6000] TARGET_RELOCATABLE
For ABI_V4, -mrelocatable and -fPIC both generate position independent
code, with some extra "fixup" output for -mrelocatable. The
similarity of these two options has led to the situation where the
sysv4.h SUBTARGET_OVERRIDE_OPTIONS sets flag_pic on seeing
-mrelocatable, and sets TARGET_RELOCATABLE on seeing -fPIC. That
prevents LTO from properly optimizing position dependent executables,
because the mutual dependence of the flags and the fact that LTO
streaming records the state of rs6000_isa_flags, result in flag_pic
being set when it shouldn't be.
So, don't set TARGET_RELOCATABLE when -fPIC. Places that currently
test TARGET_RELOCATABLE can instead test
TARGET_RELOCATABLE || (DEFAULT_ABI == ABI_V4 && flag_pic > 1)
or since TARGET_RELOCATABLE can only be enabled when ABI_V4,
DEFAULT_ABI == ABI_V4 && (TARGET_RELOCATABLE || flag_pic > 1).
Also, since flag_pic is set by -mrelocatable, a number of places that
currently test TARGET_RELOCATABLE can be simplified. I also made
-mrelocatable set TARGET_NO_FP_IN_TOC, allowing TARGET_RELOCATABLE to
be removed from ASM_OUTPUT_SPECIAL_POOL_ENTRY_P. Reducing occurrences
of TARGET_RELOCATABLE is a good thing.
uros [Wed, 4 May 2016 21:13:13 +0000 (21:13 +0000)]
PR target/70873
* config/i386/i386.md
(TARGET_SSE_PARTIAL_REG_DEPENDENCY float_extend sf->df peephole2):
Change to post-epilogue_completed late splitter. Use sse_reg_operand
as operand 0 predicate.
(TARGET_SSE_PARTIAL_REG_DEPENDENCY float_truncate df->sf peephole2):
Ditto.
(TARGET_SSE_PARTIAL_REG_DEPENDENCY float {si,di}->{sf,df} peephole2):
Ditto. Emit the pattern using RTX.
(TARGET_USE_VECTOR_FP_CONVERTS float_extend sf->df splitter):
Use sse_reg_opreand as operand 0 predicate. Do not use true_regnum in
the post-reload splitter. Use lowpart_subreg instead of gen_rtx_REG.
(TARGET_USE_VECTOR_FP_CONVERTS float_truncate df->sf splitter):
Ditto.
(TARGET_USE_VECTOR_CONVERTS float si->{sf,df} splitter): Use
sse_reg_operand as operand 0 predicate.
(TARGET_SPLIT_MEM_OPND_FOR_FP_CONVERTS float_extend sf->df peephole2):
Use sse_reg_opreand as operand 0 predicate. Use lowpart_subreg
instead of gen_rtx_REG.
(TARGET_SPLIT_MEM_OPND_FOR_FP_CONVERTS float_truncate sf->df peephole2):
Ditto.
segher [Wed, 4 May 2016 20:54:47 +0000 (20:54 +0000)]
cfgcleanup: Fold jumps and conditional branches with returns
This patch makes cfgcleanup optimize jumps to returns. There are three
cases this handles:
-- A jump to a return; this is simplified to just that return.
-- A conditional branch to a return; simplified to a conditional return.
-- A conditional branch that falls through to a return. This is simplified
to a conditional return (with the condition inverted), falling through
to a jump to the original destination. That jump can then be optimized
further, as usual.
This handles all cases the current function.c does, and a few it misses.
* cfgcleanup.c (bb_is_just_return): New function.
(try_optimize_cfg): Simplify jumps to return, branches to return,
and branches around return.
jakub [Wed, 4 May 2016 20:44:40 +0000 (20:44 +0000)]
PR c++/70906
PR c++/70933
* tree-core.h (enum operand_equal_flag): Add OEP_HASH_CHECK.
* tree.c (inchash::add_expr): If !IS_EXPR_CODE_CLASS (tclass),
assert flags & OEP_HASH_CHECK, instead of asserting it
never happens. Handle TARGET_EXPR.
* fold-const.c (operand_equal_p): For hash verification,
or in OEP_HASH_CHECK into flags.
* g++.dg/opt/pr70906.C: New test.
* g++.dg/opt/pr70933.C: New test.
amodra [Wed, 4 May 2016 13:23:58 +0000 (13:23 +0000)]
[RS6000] Correct PIC_OFFSET_TABLE_REGNUM
Leaving this as r30 results in pic_offset_table_rtx of (reg 30)
for -m64, which is completely bogus. Various rtl analysis predicate
functions treat pic_offset_table_rtx specially..
amodra [Wed, 4 May 2016 13:21:01 +0000 (13:21 +0000)]
[RS6000] Simplify sysv4.h TARGET_TOC
We can use the TARGET_* defines here. There isn't any reason to use
the underlying variable and masks. Also, TARGET_RELOCATABLE implies
TARGET_MINIMAL_TOC, so there is no need to test TARGET_RELOCATABLE.
amodra [Wed, 4 May 2016 13:17:51 +0000 (13:17 +0000)]
[RS6000] Align .toc section
Lack of any .toc section alignment causes kexec and kdump failure
when linking without the usual linker script. This of course is
really a kexec-tools error, but it is also true that .toc ought to
always be word aligned.
amodra [Wed, 4 May 2016 00:11:32 +0000 (00:11 +0000)]
Combine simplify_set WORD_REGISTER_OPERATIONS
The comment says this test is supposed to prevent "a narrower
operation than requested", but it actually only allows a larger
subreg not one the same size. Fix that.
gcc/
PR target/70866
* config/rs6000/rs6000.c (rs6000_stack_info): Don't set cr_save_p
when cr2,3,4 are all fixed regs.
gcc/testsuite/
* gcc.target/powerpc/pr70866.c: New.
msebor [Tue, 3 May 2016 21:15:28 +0000 (21:15 +0000)]
PR c++/66561 - __builtin_LINE at al. should yield constant expressions
PR c++/66639 - declare __func__, __FUNCTION__ & __PRETTY_FUNCTION__ constexpr
gcc/testsuite/ChangeLog:
2016-05-03 Martin Sebor <msebor@redhat.com>
PR c++/66561
* c-c++-common/builtin_location.c: New test.
* g++.dg/cpp1y/builtin_location.C: New test.
gcc/cp/ChangeLog:
2016-05-03 Martin Sebor <msebor@redhat.com>
PR c++/66561
* tree.c (builtin_valid_in_constant_expr_p): Treat BUILT_IN_FILE,
BUILT_IN_FUNCTION, and BUILT_IN_LINE as constant expressions.
gcc/ChangeLog:
2016-05-03 Martin Sebor <msebor@redhat.com>
PR c++/66561
* builtins.c (fold_builtin_FILE): New function.
(fold_builtin_FUNCTION, fold_builtin_LINE): New functions.
(fold_builtin_0): Call them.
* gimplify.c (gimplify_call_expr): Remove the handling of
BUILT_IN_FILE, BUILT_IN_FUNCTION, and BUILT_IN_LINE.
PR c++/66561
* doc/extend.texi (Other Builtins): Update __builtin_FILE,
__builtin_FUNCTION, and __builtin_LINE to reflect they yield
constants.
PR c++/66639
* doc/extend.texi (Function Names as Strings): Update __func__,
__FUNCTION__, __PRETTY_FUNCTION__ to reflect they evaluate to
constants.
jakub [Tue, 3 May 2016 19:30:22 +0000 (19:30 +0000)]
PR tree-optimization/70916
* tree-if-conv.c: Include cfganal.h.
(pass_if_conversion::execute): Call connect_infinite_loops_to_exit
and remove_fake_exit_edges around the optimization pass.
hubicka [Tue, 3 May 2016 19:05:31 +0000 (19:05 +0000)]
* cgraph.c (symbol_table::create_edge): Set inline_failed.
(cgraph_edge::make_direct): Likewise.
(cgraph_edge::dump_edge_flags): Dump call_stmt_cannot_inline_p.
* cgraphclones.c (duplicate_thunk_for_node): Set inline_failed.
* cif-code.def (CIF_LTO_MISMATCHED_DECLARATIONS): New code
(CIF_THUNK): New code.
* ipa-inline-analysis.c (initialize_inline_failed): Preserve
CIF_FINAL_ERROR codes; do not deal with call_stmt_cannot_inline_p.
(compute_inline_parameters): Set inline_failed for thunks.
(inline_analyze_function): Cleanup.
* ipa-inline.c (can_inline_edge_p): Do not deal with
call_stmt_cannot_inline_p.
(can_early_inline_edge_p): Likewise.
(early_inliner): Initialize inline_failed.
* lto-cgraph.c (lto_output_edge): Sanity check inline_failed.
uros [Tue, 3 May 2016 18:48:18 +0000 (18:48 +0000)]
* config/i386/predicates.md (x87nonimm_ssenomem_operand): Rename
from nonimm_ssenomem_operand.
(nonimm_ssenomem_operand): New predicate.
* config/i386/i386.md (extendsfdf2): Use nonimm_ssenomem_operand
as operand 0 predicate.
(*extendsfdf2): Merge from *extendsfdf2_mixed and *extendsfdf2_i387.
Disable unsupported alternatives using "enabled" attribute.
Use register_ssemem_operand as operand 0 predicate.
(*fop_<mode>_1): Use x87nonimm_ssenomem_operand as operand 1 predicate.
pmderodat [Tue, 3 May 2016 16:21:14 +0000 (16:21 +0000)]
Fix a typo in dwarf2out.c:resolve_args_picking_1
Under specific circumstances for Ada programs, such as in the testcase
this change adds, the DWARF back-end currently crashes because of
inconsistent internal state. This is due to a typo: a local variable is
called frame_offset_ but resolve_args_picking_1 wrongly modifies
emit-rtl.h's frame_offset instead.
This change fixes this typo.
gcc/
* dwarf2out.c (resolve_args_picking_1): Replace the frame_offset
occurence with frame_offset_ ones.
gcc/testsuite/
* gnat.dg/debug5.adb: New testcase.
krebbel [Tue, 3 May 2016 13:30:33 +0000 (13:30 +0000)]
S/390: Add patterns for r<nox>sbg instructions.
gcc/ChangeLog:
2016-05-03 Dominik Vogt <vogt@linux.vnet.ibm.com>
* config/s390/s390.md ("*r<noxa>sbg_<mode>_sll")
("*r<noxa>sbg_<mode>_srl"): New define_insns.
("*r<noxa>sbg_<mode>_srl_bitmask"): Rename by adding "_bitmask".
("*r<noxa>sbg_<mode>_sll_bitmask"): Likewise.
gcc/testsuite/ChangeLog:
2016-05-03 Dominik Vogt <vogt@linux.vnet.ibm.com>
* gcc.target/s390/md/rXsbg_mode_sXl.c: New test.
* gcc.target/s390/s390.exp (check_effective_target_z10_instructions):
Procedure to check for z10 instruction set.
amodra [Tue, 3 May 2016 12:38:32 +0000 (12:38 +0000)]
[RS6000] Fix ICE caused by rs6000_savres_strategy thinko
rev 235672 (git cffc0b35) changed the condition for SAVE_MULTIPLE/
STORE_MULTIPLE, wrongly allowing a single reg.
gcc/
* config/rs6000/rs6000.c (rs6000_savres_strategy): Correct condition
for SAVE_MULTIPLE/STORE_MULTIPLE.
gcc/testsuite/
* gcc.target/powerpc/savres.c: Add func using a single gpr.
rguenth [Tue, 3 May 2016 12:06:19 +0000 (12:06 +0000)]
2016-05-03 Richard Biener <rguenther@suse.de>
* gimplify.h (get_initialized_tmp_var): Add allow_ssa parameter
default true.
(gimplify_arg): Likewise.
* gimplify.c (gimplify_expr): Add overload with allow_ssa parameter,
re-writing the result to a decl if required.
(internal_get_tmp_var): Add allow_ssa parameter
and override into_ssa with it.
(get_formal_tmp_var): Adjust.
(get_initialized_tmp_var): Add allow_ssa parameter.
(gimplify_arg): Add allow_ssa parameter and avoid generating
SSA names for the result false.
(gimplify_call_expr): If the call may return twice do not
gimplify parameters into SSA.
(prepare_gimple_addressable): Do not allow an SSA name as
temporary.
(gimplify_modify_expr): Adjust assert. For noreturn calls
with a SSA name LHS adjust its def.
(gimplify_save_expr): Do not allow an SSA name as save-expr
result.
(gimplify_one_sizepos): Do not allow an SSA name as a sizepos.
(gimplify_body): Init GIMPLE SSA data structures and gimplify
into-SSA.
(gimplify_scan_omp_clauses): Make sure OMP_CLAUSE_SIZE is not
an SSA name. Likewise for OMP_CLAUSE_REDUCTION operands.
(gimplify_omp_for): Likewise for OMP_CLAUSE_DECL. Likewise
for OMP_FOR_COND, OMP_FOR_INCR and OMP_CLAUSE_LINEAR_STEP.
(optimize_target_teams): Do not allow SSA names for clause operands.
(gimplify_expr): Likewise for where we mark the result addressable.
* passes.def (pass_init_datastructures): Remove.
* tree-into-ssa.c (mark_def_sites): Ignore existing SSA names.
(rewrite_stmt): Likewise.
* tree-inline.c (initialize_cfun): Properly transfer SSA state.
(replace_locals_op): Replace SSA names.
(copy_gimple_seq_and_replace_locals): Init src_cfun.
* gimple-low.c (lower_builtin_setjmp): Deal with SSA.
* cgraph.c (release_function_body): Free CFG annotations only
when we have a CFG. Simplify.
* gimple-fold.c (gimplify_and_update_call_from_tree): Use
force_gimple_operand instead of get_initialized_tmp_var.
* tree-pass.h (make_pass_init_datastructures): Remove.
* tree-ssa.c (execute_init_datastructures): Remove.
(pass_data_init_datastructures): Likewise.
(class pass_init_datastructures): Likewise.
(make_pass_init_datastructures): Likewise.
* omp-low.c (create_omp_child_function): Init SSA data structures.
(grid_expand_target_grid_body): Likewise.
* tree-cfg.c (move_block_to_fn): Double-check the DEF is an SSA
name before adding it to names_to_release.
(remove_bb): Always release SSA defs.
* tree-ssa-ccp.c (get_default_value): Check SSA_NAME_VAR
before dereferencing it.
* cgraphunit.c (init_lowered_empty_function): Always
int SSA data structures.
* tree-ssanames.c (release_defs): Remove assert that we are in
SSA form.
* trans-mem.c (diagnose_tm_1): Handle SSA name function.
c-family/
* cilk.c (cilk_gimplify_call_params_in_spawned_fn): Do not
allow call args to gimplify to SSA names.
jakub [Tue, 3 May 2016 11:45:04 +0000 (11:45 +0000)]
PR rtl-optimization/70467
* config/i386/predicates.md (x86_64_hilo_int_operand,
x86_64_hilo_general_operand): New predicates.
* config/i386/constraints.md (Wd): New constraint.
* config/i386/i386.md (mode attr di): Use Wd instead of e.
(general_hilo_operand): New mode attr.
(add<mode>3, sub<mode>3): Use <general_hilo_operand>
instead of <general_operand>.
(*add<dwi>3_doubleword, *sub<dwi>3_doubleword): Use
x86_64_hilo_general_operand instead of <general_operand>.
* gcc.target/i386/pr70467-3.c: New test.
* gcc.target/i386/pr70467-4.c: New test.
jakub [Tue, 3 May 2016 11:38:38 +0000 (11:38 +0000)]
PR tree-optimization/70916
* tree-vect-patterns.c (vect_recog_mask_conversion_pattern): Give up
if COND_EXPR rhs1 is neither SSA_NAME nor COMPARISON_CLASS_P.
rsandifo [Tue, 3 May 2016 10:29:55 +0000 (10:29 +0000)]
PR 70687: Use wide_int in combine.c:change_zero_ext
PR 70687 reports a case where combine.c mishandles integer modes
wider than unsigned HOST_WIDE_INT. I don't have a testcase since
the PR is just pointing out the hole.
Also, I think a ZERO_EXTEND of a vector mode could in principle satisfy
the subreg condition but wouldn't be equivalent to an AND. E.g.:
(zero_extend:V4DI (subreg:V4SI (reg:V4DI R) 0))
Tested on x86_64-linux-gnu.
gcc/
PR rtl-optimization/70687
* combine.c (change_zero_ext): Check for scalar modes. Use wide_int
instead of unsigned HOST_WIDE_INT.
bernds [Tue, 3 May 2016 09:35:42 +0000 (09:35 +0000)]
Fix PR44281, bad RA with global regs.
PR rtl-optimization/44281
* hard-reg-set.h (struct target_hard_regs): New field
x_fixed_nonglobal_reg_set.
(fixed_nonglobal_reg_set): New macro.
* reginfo.c (init_reg_sets_1): Initialize it.
* ira.c (setup_alloc_regs): Use fixed_nonglobal_reg_set instead
of fixed_reg_set.
* df-scan.c (df_insn_refs_collect): Asms may reference global regs.
testsuite/
PR rtl-optimization/44281
* gcc.target/i386/pr44281.c: New test.
amker [Tue, 3 May 2016 09:04:46 +0000 (09:04 +0000)]
PR tree-optimization/56541
* doc/invoke.texi (@item max-tree-if-conversion-phi-args): New item.
* params.def (PARAM_MAX_TREE_IF_CONVERSION_PHI_ARGS): new param.
* tree-if-conv.c (MAX_PHI_ARG_NUM): new macro.
(any_complicated_phi): new static variable.
(aggressive_if_conv): delete.
(if_convertible_phi_p): support phis with more than two arguments.
(if_convertible_bb_p): remvoe check on aggressive_if_conv and
critical pred edges.
(ifcvt_split_critical_edges): support phis with more than two
arguments by checking new parameter. only split critical edges
if needed.
(tree_if_conversion): handle simd pragma marked loop using new
local variable aggressive_if_conv. check any_complicated_phi.
gcc/testsuite
PR tree-optimization/56541
* gcc.dg/tree-ssa/ifc-pr56541.c: new test.
* gcc.dg/vect/pr56541.c: new test.
meissner [Mon, 2 May 2016 23:23:45 +0000 (23:23 +0000)]
[gcc]
2016-05-02 Michael Meissner <meissner@linux.vnet.ibm.com>
* machmode.h (mode_complex): Add support to give the complex mode
for a given mode.
(GET_MODE_COMPLEX_MODE): Likewise.
* stor-layout.c (layout_type): For COMPLEX_TYPE, use the mode
stored by build_complex_type and gfc_build_complex_type instead of
trying to figure out the appropriate mode based on the size. Raise
an assertion error, if the type was not set.
* genmodes.c (struct mode_data): Add field for the complex type of
the given type.
(blank_mode): Likewise.
(make_complex_modes): Remember the complex mode created in the
base type.
(emit_mode_complex): Write out the mode_complex array to map a
type mode to the complex version.
(emit_insn_modes_c): Likewise.
* tree.c (build_complex_type): Set the complex type to use before
calling layout_type.
* config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Add
support for __float128 complex datatypes.
(rs6000_hard_regno_mode_ok): Likewise.
(rs6000_setup_reg_addr_masks): Likewise.
(rs6000_complex_function_value): Likewise.
* config/rs6000/rs6000.h (FLOAT128_IEEE_P): Likewise.
__float128 and __ibm128 complex.
(FLOAT128_IBM_P): Likewise.
(ALTIVEC_ARG_MAX_RETURN): Likewise.
* doc/extend.texi (Additional Floating Types): Document that
-mfloat128 must be used to enable __float128. Document complex
__float128 and __ibm128 support.
[gcc/fortran]
2016-05-02 Michael Meissner <meissner@linux.vnet.ibm.com>
* trans-types.c (gfc_build_complex_type):
[gcc/testsuite]
2016-05-02 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/float128-complex-1.c: New tests for complex
__float128.
* gcc.target/powerpc/float128-complex-2.c: Likewise.
dmalcolm [Mon, 2 May 2016 19:09:30 +0000 (19:09 +0000)]
PR c++/62314: C++: add fixit hint to misspelled member names
When we emit a hint about a misspelled member name, it will slightly
aid readability if we use a fixit-hint to show the proposed
name in context within the source code (and in the future this
might support some kind of auto-apply in an IDE).
This patch adds such a hint to the C++ frontend, taking us from:
test.cc:10:15: error: 'struct foo' has no member named 'colour'; did you mean 'color'?
return ptr->colour;
^~~~~~
to:
test.cc:10:15: error: 'struct foo' has no member named 'colour'; did you mean 'color'?
return ptr->colour;
^~~~~~
color
gcc/cp/ChangeLog:
PR c++/62314
* typeck.c (finish_class_member_access_expr): When
giving a hint about a possibly-misspelled member name,
add a fix-it replacement hint.
gcc/testsuite/ChangeLog:
PR c++/62314
* g++.dg/spellcheck-fields-2.C: New test case.
uros [Mon, 2 May 2016 18:52:33 +0000 (18:52 +0000)]
* config/i386/predicates.md (register_ssemem_operand): New predicate.
* config/i386/i386.md (*cmpi<FPCMP:unord><MODEF:mode>): Merge from
*cmpi<FPCMP:unord><MODEF:mode>_mixed and
*cmpi<FPCMP:unord><X87MODEF:mode>_i387. Disable unsupported
alternatives using "enabled" attribute. Use register_ssemem_operand
as operand 1 predicate.
(*cmpi<unord>xf_i387): Split XFmode pattern from
*cmpi<FPCMP:unord><X87MODEF:mode>_i387.
(*absneg<mode>2): Merge from *absneg<mode>2_mixed and
*absneg<mode>2_i387. Disable unsupported alternatives using
"enabled" attribute.
dmalcolm [Mon, 2 May 2016 18:36:40 +0000 (18:36 +0000)]
PR c++/62314: add fixit hint for missing "template <> " in explicit specialization
gcc/cp/ChangeLog:
PR c++/62314
* parser.c (cp_parser_class_head): Capture the start location;
use it to emit a fix-it insertion hint when complaining
about missing "template <> " in explicit specializations.
gcc/testsuite/ChangeLog:
PR c++/62314
* g++.dg/pr62314.C: New test case.
bernds [Mon, 2 May 2016 17:06:40 +0000 (17:06 +0000)]
Demangler integer overflow fixes from Marcel Böhme.
PR c++/70498
* cp-demangle.c: Parse numbers as integer instead of long to avoid
overflow after sanity checks. Include <limits.h> if available.
(INT_MAX): Define if necessary.
(d_make_template_param): Takes integer argument instead of long.
(d_make_function_param): Likewise.
(d_append_num): Likewise.
(d_identifier): Likewise.
(d_number): Parse as and return integer.
(d_compact_number): Handle overflow.
(d_source_name): Change variable type to integer for parsed number.
(d_java_resource): Likewise.
(d_special_name): Likewise.
(d_discriminator): Likewise.
(d_unnamed_type): Likewise.
* testsuite/demangle-expected: Add regression test cases.
hubicka [Mon, 2 May 2016 16:55:56 +0000 (16:55 +0000)]
* ipa-inline-analysis.c (reset_inline_summary): Clear fp_expressions
(dump_inline_summary): Dump it.
(fp_expression_p): New predicate.
(estimate_function_body_sizes): Use it.
(inline_merge_summary): Merge fp_expressions.
(inline_read_section): Read fp_expressions.
(inline_write_summary): Write fp_expressions.
* ipa-inline.c (can_inline_edge_p): Permit inlining across fp math
codegen boundary if either caller or callee is !fp_expressions.
* ipa-inline.h (inline_summary): Add fp_expressions.
* ipa-inline-transform.c (inline_call): When inlining !fp_expressions
to fp_expressions be sure the fp generation flags are updated.
nathan [Mon, 2 May 2016 13:16:22 +0000 (13:16 +0000)]
gcc/
* omp-low.c (struct oacc_loop): Add 'inner' field.
(new_oacc_loop_raw): Initialize it to zero.
(oacc_loop_fixed_partitions): Initialize it.
(oacc_loop_auto_partitions): Partition outermost loop to outermost
available partitioning.
projects / thirdparty / gcc.git / log
