A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com> Cc: Vishnu Dasa <vishnu.dasa@broadcom.com> Cc: Broadcom internal kernel review list Cc: Stefano Garzarella <sgarzare@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cmos_interrupt() can be called in a non-interrupt context, such as in
an ACPI event handler (which runs in an interrupt thread). Therefore,
usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() /
spin_unlock_irqrestore() instead.
Before a misguided
commit 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
the cmos_interrupt() function used spin_lock_irqsave(). That commit
changed it to spin_lock() and broke locking, which was partially fixed in
commit 13be2efc390a ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()")
That second commit did not take account of the ACPI fixed event handler
pathway, however. It introduced local_irq_disable() workarounds in
cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels
and are now unnecessary.
Add an explicit comment so that this change will not be reverted by
mistake.
Cc: stable@vger.kernel.org Fixes: 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/all/aDtJ92foPUYmGheF@debian.local/ Link: https://lore.kernel.org/r/20250607210608.14835-1-mat.jonczyk@o2.pl Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()") Cc: stable@vger.kernel.org Reported-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Currently when the pci-hyperv driver finishes probing and initializing the
PCI device, it sets the PCI_COMMAND_MEMORY bit; later when the PCI device
is registered to the core PCI subsystem, the core PCI driver's BAR detection
and initialization code toggles the bit multiple times, and each toggling of
the bit causes the hypervisor to unmap/map the virtual BARs from/to the
physical BARs, which can be slow if the BAR sizes are huge, e.g., a Linux VM
with 14 GPU devices has to spend more than 3 minutes on BAR detection and
initialization, causing a long boot time.
Reduce the boot time by not setting the PCI_COMMAND_MEMORY bit when we
register the PCI device (there is no need to have it set in the first place).
The bit stays off till the PCI device driver calls pci_enable_device().
With this change, the boot time of such a 14-GPU VM is reduced by almost
3 minutes.
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae450 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Cc: stable@vger.kernel.org Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com> Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support") Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Blamed commit missed that vcc_destroy_socket() calls
clip_push() with a NULL skb.
If clip_devs is NULL, clip_push() then crashes when reading
skb->truesize.
Fixes: 93a2014afbac ("atm: fix a UAF in lec_arp_clear_vccs()") Reported-by: syzbot+1316233c4c6803382a8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68556f59.a00a0220.137b3.004e.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v2.6.22+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 3ef5d16f50f8 ("PCI: cadence: Add MSI-X support to Endpoint driver") Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Query the ring buffer size from pre defined table per device
and use that value for allocating the ring buffer for that
device. Keep the size as current default which is 2 MB if
the device doesn't have any preferred ring size.
Add a function to query for the preferred ring buffer size of VMBus
device. This will allow the drivers (eg. UIO) to allocate the most
optimized ring buffer size for devices.
The vmbus module uses a rotational algorithm to assign target CPUs to
a device's channels. Depending on the timing of different device's channel
offers, different channels of a device may be assigned to the same CPU.
For example on a VM with 2 CPUs, if NIC A and B's channels are offered
in the following order, NIC A will have both channels on CPU0, and
NIC B will have both channels on CPU1 -- see below. This kind of
assignment causes RSS load that is spreading across different channels
to end up on the same CPU.
Timing of channel offers:
NIC A channel 0
NIC B channel 0
NIC A channel 1
NIC B channel 1
Update the vmbus CPU assignment algorithm to avoid duplicate CPU
assignments within a device.
The new algorithm iterates num_online_cpus + 1 times.
The existing rotational algorithm to find "next NUMA & CPU" is still here.
But if the resulting CPU is already used by the same device, it will try
the next CPU.
In the last iteration, it assigns the channel to the next available CPU
like the existing algorithm. This is not normally expected, because
during device probe, we limit the number of channels of a device to
be <= number of online CPUs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1626459673-17420-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Stable-dep-of: 0315fef2aff9 ("uio_hv_generic: Align ring size to system page") Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a minor cleanup for the management of the private object of this
driver. The allocation can be tied to the life-time of the hv_device
object.
This cleans up a bit the exit & error paths, since the object doesn't need
to be explicitly free'd anymore.
The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last
deref") simplified cm_id resource management by freeing cm_id once all
references to the cm_id were removed. The references are removed either
upon completion of iw_cm event handlers or when the application destroys
the cm_id. This commit introduced the use-after-free condition where
cm_id_private object could still be in use by event handler works during
the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a
use-after-free related to destroying CM IDs") addressed this use-after-
free by flushing all pending works at the cm_id destruction.
However, still another use-after-free possibility remained. It happens
with the work objects allocated for each cm_id_priv within
alloc_work_entries() during cm_id creation, and subsequently freed in
dealloc_work_entries() once all references to the cm_id are removed.
If the cm_id's last reference is decremented in the event handler work,
the work object for the work itself gets removed, and causes the use-
after-free BUG below:
BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250
Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091
Last potentially related work creation:
kasan_save_stack+0x2c/0x50
kasan_record_aux_stack+0xa3/0xb0
__queue_work+0x2ff/0x1390
queue_work_on+0x67/0xc0
cm_event_handler+0x46a/0x820 [iw_cm]
siw_cm_upcall+0x330/0x650 [siw]
siw_cm_work_handler+0x6b9/0x2b20 [siw]
process_one_work+0x84f/0x1460
worker_thread+0x5ef/0xfd0
kthread+0x3b0/0x770
ret_from_fork+0x30/0x70
ret_from_fork_asm+0x1a/0x30
This BUG is reproducible by repeating the blktests test case nvme/061
for the rdma transport and the siw driver.
To avoid the use-after-free of cm_id_private work objects, ensure that
the last reference to the cm_id is decremented not in the event handler
works, but in the cm_id destruction context. For that purpose, move
iwcm_deref_id() call from destroy_cm_id() to the callers of
destroy_cm_id(). In iw_destroy_cm_id(), call iwcm_deref_id() after
flushing the pending works.
During the fix work, I noticed that iw_destroy_cm_id() is called from
cm_work_handler() and process_event() context. However, the comment of
iw_destroy_cm_id() notes that the function "cannot be called by the
event thread". Drop the false comment.
Closes: https://lore.kernel.org/linux-rdma/r5676e754sv35aq7cdsqrlnvyhiq5zktteaurl7vmfih35efko@z6lay7uypy3c/ Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") Cc: stable@vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://patch.msgid.link/20250510101036.1756439-1-shinichiro.kawasaki@wdc.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes an analogus bug that was fixed in modern filesystems:
a) xfs in commit 4b8d867ca6e2 ("xfs: don't over-report free space or
inodes in statvfs")
b) ext4 in commit f87d3af74193 ("ext4: don't over-report free space
or inodes in statvfs")
where statfs can report misleading / incorrect information where
project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests
for this bug.
generic/762 - output mismatch (see /share/git/fstests/results//generic/762.out.bad)
# --- tests/generic/762.out 2025-04-15 10:21:53.371067071 +0800
# +++ /share/git/fstests/results//generic/762.out.bad 2025-05-13 16:13:37.000000000 +0800
# @@ -6,8 +6,10 @@
# root blocks2 is in range
# dir blocks2 is in range
# root bavail2 is in range
# -dir bavail2 is in range
# +dir bavail2 has value of 1539066
# +dir bavail2 is NOT in range 304734.87 .. 310891.13
# root blocks3 is in range
# ...
# (Run 'diff -u /share/git/fstests/tests/generic/762.out /share/git/fstests/results//generic/762.out.bad' to see the entire diff)
HINT: You _MAY_ be missing kernel fix:
XXXXXXXXXXXXXX xfs: don't over-report free space or inodes in statvfs
Fixes the power regulator retrieval in tcan4x5x_can_probe() by ensuring
the regulator pointer is not set to NULL in the successful return from
devm_regulator_get_optional().
Fixes: 3814ca3a10be ("can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config") Signed-off-by: Brett Werling <brett.werling@garmin.com> Link: https://patch.msgid.link/20250612191825.3646364-1-brett.werling@garmin.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: d33186d0be18 ("[media] omap3isp: ccdc: Use the DMA API for LSC") Fixes: 0e24e90f2ca7 ("[media] omap3isp: stat: Use the DMA API") CC: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
Sanity checks have been added to dbMount as individual if clauses with
identical error handling. Move these all into one clause.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Stable-dep-of: 37bfb464ddca ("jfs: validate AG parameters in dbMount() to prevent crashes") Signed-off-by: Sasha Levin <sashal@kernel.org>
Register read of TCPC_RX_BYTE_CNT returns the total size consisting of:
PD message (pending read) size + 1 Byte for Frame Type (SOP*)
This is validated against the max PD message (`struct pd_message`) size
without accounting for the extra byte for the frame type. Note that the
struct pd_message does not contain a field for the frame_type. This
results in false negatives when the "PD message (pending read)" is equal
to the max PD message size.
New smatch warnings:
drivers/usb/typec/tcpm/tcpci_maxim.c:324 max_tcpci_irq() error: uninitialized symbol 'irq_return'.
drivers/usb/typec/tcpm/tcpci_maxim.c:407 max_tcpci_probe() warn: passing zero to 'PTR_ERR'
The change fixes the above warnings by initializing irq_return
and replacing IS_ERR_OR_NULL with IS_ERR.
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.
general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1bd6406fb5f3 ("VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify") Signed-off-by: Sasha Levin <sashal@kernel.org>
In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is
possible for OVL_E() to return NULL (which implies that d_inode(dentry)
may be NULL). This would result in out of bounds reads via container_of(),
seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example:
In file included from arch/x86/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:339,
from include/linux/export.h:5,
from include/linux/linkage.h:7,
from include/linux/fs.h:5,
from fs/overlayfs/util.c:7:
In function 'ovl_upperdentry_dereference',
inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9,
inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6:
include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=]
44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE'
50 | __READ_ONCE(x); \
| ^~~~~~~~~~~
fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE'
195 | return READ_ONCE(oi->__upperdentry);
| ^~~~~~~~~
'ovl_path_type': event 1
185 | return inode ? OVL_I(inode)->oe : NULL;
'ovl_path_type': event 2
Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is
NULL, as that means the problematic dereferencing can never be reached.
Note that this fixes the over-eager compiler warning in an effort to
being able to enable -Warray-bounds globally. There is no known
behavioral bug here.
For the classic snd_hda_intel driver, codec->card and bus->card point to
the exact same thing. When snd_card_diconnect() fires, bus->shutdown is
set thanks to azx_dev_disconnect(). card->shutdown is already set when
that happens but both provide basically the same functionality.
For the DSP snd_soc_avs driver where multiple codecs are located on
multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec
card may be unregistered while other codecs are still operational.
Proper check in form of card->shutdown must be used to verify whether
the codec's card is being shut down.
Although some Type-C DRD devices that do not support the DP Sink
function (such as Huawei Mate 40Pro), the Source Port initiates
Enter Mode CMD, but the device responds to Enter Mode ACK, the
Source port then initiates DP Status Update CMD, and the device
responds to DP Status Update NAK.
As PD2.0 spec ("6.4.4.3.4 Enter Mode Command")，A DR_Swap Message
Shall Not be sent during Modal Operation between the Port Partners.
At this time, the source port initiates DR_Swap message through the
"echo device > /sys/class/typec/port0/data_role" command to switch
the data role from host to device. The device will initiate a Hard
Reset for recovery, resulting in the failure of data role swap.
Therefore, when DP Status Update NAK is received, Exit Mode CMD is
initiated to exit the currently entered DP altmode.
Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250209071926.69625-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't set WDM_READ flag in wdm_in_callback() for ZLP-s, otherwise when
userspace tries to poll for available data, it might - incorrectly -
believe there is something available, and when it tries to non-blocking
read it, it might get stuck in the read loop.
For example this is what glib does for non-blocking read (briefly):
1. poll()
2. if poll returns with non-zero, starts a read data loop:
a. loop on poll() (EINTR disabled)
b. if revents was set, reads data
I. if read returns with EINTR or EAGAIN, goto 2.a.
II. otherwise return with data
So if ZLP sets WDM_READ (#1), we expect data, and try to read it (#2).
But as that was a ZLP, and we are doing non-blocking read, wdm_read()
returns with EAGAIN (#2.b.I), so loop again, and try to read again
(#2.a.).
With glib, we might stuck in this loop forever, as EINTR is disabled
(#2.a).
When creating a device path in the driver the snprintf() takes
up to 16 characters long argument along with the additional up to
12 characters for the signed integer (as it can't see the actual limits)
and tries to pack this into 16 bytes array. GCC complains about that
when build with `make W=1`:
drivers/usb/core/usb.c:705:25: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16
Since everything works until now, let's just check for the potential
buffer overflow and bail out. It is most likely a never happen situation,
but at least it makes GCC happy.
The current implementation of the usb-conn-gpio driver uses a fixed
"usb-charger" name for all USB connector devices. This causes conflicts
in the power supply subsystem when multiple USB connectors are present,
as duplicate names are not allowed.
Use IDA to manage unique IDs for naming usb connectors (e.g.,
usb-charger-0, usb-charger-1).
The variable tpgt in usbg_make_tpg() is defined as unsigned long and is
assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an
integer overflow when tpgt is greater than USHRT_MAX (65535). I
haven't tried to trigger it myself, but it is possible to trigger it
by calling usbg_make_tpg() with a large value for tpgt.
I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the
relevant code accordingly.
This patch is similar to commit 59c816c1f24d ("vhost/scsi: potential
memory corruption").
With CONFIG_GENDWARFKSYMS, um builds fail due to missing prototypes
in asm/asm-prototypes.h. Add declarations for cmpxchg8b_emu and the
exported checksum functions, including csum_partial_copy_generic as
it's also exported.
Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: linux-kbuild@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503251216.lE4t9Ikj-lkp@intel.com/ Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Link: https://patch.msgid.link/20250326190500.847236-2-samitolvanen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
Coalesce the direction bits from the enabled TX and/or RX channels into
the directions bit mask of dma_device. Without this mask set,
dma_get_slave_caps() in the DMAEngine fails, which prevents the driver
from being used with an IIO DMAEngine buffer.
The max344** family has an issue with some PMBUS address being switched.
This includes max34451 however version MAX34451-NA6 and later has this
issue fixed and this commit supports that update.
When writing to the multi_intensity file, don't unconditionally call
led_set_brightness. By only doing this if blinking is inactive we
prevent blinking from stopping if the blinking is in its off phase while
the file is written.
Instead, if blinking is active, the changed intensity values are applied
upon the next blink. This is consistent with changing the brightness on
monochrome LEDs with active blinking.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Tobias Deiminger <tobias.deiminger@linutronix.de> Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Link: https://lore.kernel.org/r/20250404184043.227116-1-sven@svenschwermer.de Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
&chan->lock is not supposed to protect 'chan->mbox'.
And in __mbox_bind_client, try_module_get is also not protected
by &chan->lock. So move module_put out of the lock protected
region.
Currently, when NFS is queried for all the labels present on the
file via a command example "getfattr -d -m . /mnt/testfile", it
does not return the security label. Yet when asked specifically for
the label (getfattr -n security.selinux) it will be returned.
Include the security label when all attributes are queried.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For TRANS2 QUERY_PATH_INFO request when the path does not exist, the
Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND
or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it
returns STATUS_DELETE_PENDING when the file is being deleted. And looks
like that any error response from TRANS2 QUERY_PATH_INFO does not have
SMBFLG_RESPONSE flag set.
So relax check in check_smb_hdr() for detecting if the packet is response
for this special case.
This change fixes stat() operation against Windows NT SMB servers and also
all operations which depends on -ENOENT result from stat like creat() or
mkdir().
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
Fix an edge case in __mark_chain_precision() which prematurely stops
backtracking instructions in a state if it happens that state's first
and last instruction indexes are the same. This situations doesn't
necessarily mean that there were no instructions simulated in a state,
but rather that we starting from the instruction, jumped around a bit,
and then ended up at the same instruction before checkpointing or
marking precision.
To distinguish between these two possible situations, we need to consult
jump history. If it's empty or contain a single record "bridging" parent
state and first instruction of processed state, then we indeed
backtracked all instructions in this state. But if history is not empty,
we are definitely not done yet.
Move this logic inside get_prev_insn_idx() to contain it more nicely.
Use -ENOENT return code to denote "we are out of instructions"
situation.
This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once
the next fix in this patch set is applied.
This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:
commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.
Fixes: 0a8ea52c3eb1 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature") Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem.
Fixes: c5ebcedb566e ("perf: Add ability to attach user stack dump to sample") Reported-by: Baisheng Gao <baisheng.gao@unisoc.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20250605110815.GQ39944@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Use "a" constraint for the shift operand of the __pcilg_mio_inuser() inline
assembly. The used "d" constraint allows the compiler to use any general
purpose register for the shift operand, including register zero.
If register zero is used this my result in incorrect code generation:
If register zero is selected to contain the shift value, the srlg
instruction ignores the contents of the register and always shifts zero
bits. Therefore use the "a" constraint which does not permit to select
register zero.
The P10 (temp sensor version 0x10) doesn't do the same VRM status
reporting that was used on P9. It just reports the temperature, so
drop the check for VRM fru type in the sysfs show function, and don't
set the name to "alarm".
Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210929153604.14968-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below. To prevent this invalid access, it is necessary to
check the PMD migration entry and return early. In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio. Since the PMD migration entry is locked, it
cannot be served as the target.
Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."
BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.
Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/ Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/ Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Gavin Guo <gavinguo@igalia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Florent Revest <revest@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[gavin: backport the migration checking logic to __split_huge_pmd] Signed-off-by: Gavin Guo <gavinguo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access.
Conversion of dates before 1970 is still relevant today because these
dates are reused on some hardwares to store dates bigger than the
maximal date that is representable in the device's native format.
This prominently and very soon affects the hardware covered by the
rtc-mt6397 driver that can only natively store dates in the interval
1900-01-01 up to 2027-12-31. So to store the date 2028-01-01 00:00:00
to such a device, rtc_time64_to_tm() must do the right thing for
time=-2208988800.
The current implementation of rtc_time64_to_tm() contains unnecessary
loops, branches and look-up tables. The new one uses an arithmetic-based
algorithm appeared in [1] and is approximately 4.3 times faster (YMMV).
The drawback is that the new code isn't intuitive and contains many 'magic
numbers' (not unusual for this type of algorithm). However, [1] justifies
all those numbers and, given this function's history, the code is unlikely
to need much maintenance, if any at all.
Add a KUnit test case that checks every day in a 160,000 years interval
starting on 1970-01-01 against the expected result. Add a new config
RTC_LIB_KUNIT_TEST symbol to give the option to run this test suite.
[1] Neri, Schneider, "Euclidean Affine Functions and Applications to
Calendar Algorithms". https://arxiv.org/abs/2102.06959
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Note: Fixed conflict due to unrelated comment change. ] Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Fixed conflict due to unrelated change in inet_proto_csum_replace_by_diff. ] Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliav Farber [Mon, 9 Jun 2025 04:32:59 +0000 (04:32 +0000)]
net/ipv4: fix type mismatch in inet_ehash_locks_alloc() causing build failure
Fix compilation warning:
In file included from ./include/linux/kernel.h:15,
from ./include/linux/list.h:9,
from ./include/linux/module.h:12,
from net/ipv4/inet_hashtables.c:12:
net/ipv4/inet_hashtables.c: In function ‘inet_ehash_locks_alloc’:
./include/linux/minmax.h:20:35: warning: comparison of distinct pointer types lacks a cast
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck’
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp’
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:52:25: note: in expansion of macro ‘__careful_cmp’
52 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
net/ipv4/inet_hashtables.c:946:19: note: in expansion of macro ‘max’
946 | nblocks = max(nblocks, num_online_nodes() * PAGE_SIZE / locksz);
| ^~~
CC block/badblocks.o
When warnings are treated as errors, this causes the build to fail.
The issue is a type mismatch between the operands passed to the max()
macro. Here, nblocks is an unsigned int, while the expression
num_online_nodes() * PAGE_SIZE / locksz is promoted to unsigned long.
This happens because:
- num_online_nodes() returns int
- PAGE_SIZE is typically defined as an unsigned long (depending on the
architecture)
- locksz is unsigned int
The resulting arithmetic expression is promoted to unsigned long.
Thus, the max() macro compares values of different types: unsigned int
vs unsigned long.
This issue was introduced in commit f8ece40786c9 ("tcp: bring back NUMA
dispersion in inet_ehash_locks_alloc()") during the update from kernel
v5.10.237 to v5.10.238.
It does not exist in newer kernel branches (e.g., v5.15.185 and all 6.x
branches), because they include commit d03eba99f5bf ("minmax: allow
min()/max()/clamp() if the arguments have the same signedness.")
Fix the issue by using max_t(unsigned int, ...) to explicitly cast both
operands to the same type, avoiding the type mismatch and ensuring
correctness.
Fixes: f8ece40786c9 ("tcp: bring back NUMA dispersion in inet_ehash_locks_alloc()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless.
Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In our environment, it was found that the mitigation BHB has a great
impact on the benchmark performance. For example, in the lmbench test,
the "process fork && exit" test performance drops by 20%.
So it is necessary to have the ability to turn off the mitigation
individually through cmdline, thus avoiding having to compile the
kernel by adjusting the config.
Signed-off-by: Liu Song <liusong@linux.alibaba.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1661514050-22263-1-git-send-email-liusong@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
