In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The name of the module for the NVIDIA alt-mode is incorrect as it
looks to be a copy-paste error from the entry above, update it to
the correct typec_nvidia module name.
When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some
requests at rsp_wait_list. In case a disconnect occurs at this
state, no one will empty this list and will return the requests to
free_rsps list. Normally nvmet_rdma_queue_established() free those
requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in
this case __nvmet_rdma_queue_disconnect() is called before. The
crash happens at nvmet_rdma_free_rsps() when calling
list_del(&rsp->free_list), because the request exists only at
the wait list. To fix the issue, simply clear rsp_wait_list when
destroying the queue.
Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.
Therefore the kselftest framework will report this case is OK.
Check and return the exit status of each test to make it easier to
spot real failures.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE()
into error") the ppc32_allmodconfig build fails with:
ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o
ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o
Add the missing MODULE_LICENSEs to fix the build. Both files include a
copyright header indicating they are GPL v2.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables':
(.text+0x30c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
fs/dax.c uses copy_user_page() but ARC does not provide that interface,
resulting in a build error.
Provide copy_user_page() in <asm/page.h>.
../fs/dax.c: In function 'copy_cow_page_dax':
../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com>
#Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org
#Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
BFQ computes number of tags it allows to be allocated for each request type
based on tag bitmap. However it uses 1 << bitmap.shift as number of
available tags which is wrong. 'shift' is just an internal bitmap value
containing logarithm of how many bits bitmap uses in each bitmap word.
Thus number of tags allowed for some request types can be far to low.
Use proper bitmap.depth which has the number of tags instead.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Older versions of BSD awk are fussy about the order of '-v' and '-f'
flags, and require a space after the flag name. This causes build
failures on platforms with an old awk, such as macOS and NetBSD.
Since GNU awk and modern versions of BSD awk (distributed with
FreeBSD/OpenBSD) are fine with either form, the definition of
'cmd_unroll' can be trivially tweaked to let the lib/raid6 Makefile
work with both old and new awk flag dialects.
unsigned long period;
...
period = ctx->pwm->args.period;
state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
calculates a too small value for duty_cycle if the configured period is
big (either by discarding the 64 bit value ctx->pwm->args.period or by
overflowing the multiplication). As this results in a too slow fan and
so maybe an overheating machine better be safe than sorry and error out
in .probe.
Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text
Base Address of the Global Transmitter Parameter RAM Page. [...]
The user needs to allocate 128 bytes for this page. The address must
be aligned to the page size.
I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).
Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).
I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.
Use the typical startup times from the data sheet so boards get a
reasonable default. Not setting any enable time can lead to board hangs
when e.g. clocks are enabled too soon afterwards.
This fixes gpu power domain resume on the Librem 5.
[Moved #defines into driver, seems to be general agreement and avoids any
cross tree issues -- broonie]
If we remount a filesystem in RO mode while the qgroup rescan worker is
running, we can end up having it still running after the remount is done,
and at unmount time we may end up with an open transaction that ends up
never getting committed. If that happens we end up with several memory
leaks and can crash when hardware acceleration is unavailable for crc32c.
Possibly it can lead to other nasty surprises too, due to use-after-free
issues.
The following steps explain how the problem happens.
1) We have a filesystem mounted in RW mode and the qgroup rescan worker is
running;
2) We remount the filesystem in RO mode, and never stop/pause the rescan
worker, so after the remount the rescan worker is still running. The
important detail here is that the rescan task is still running after
the remount operation committed any ongoing transaction through its
call to btrfs_commit_super();
3) The rescan is still running, and after the remount completed, the
rescan worker started a transaction, after it finished iterating all
leaves of the extent tree, to update the qgroup status item in the
quotas tree. It does not commit the transaction, it only releases its
handle on the transaction;
4) A filesystem unmount operation starts shortly after;
5) The unmount task, at close_ctree(), stops the transaction kthread,
which had not had a chance to commit the open transaction since it was
sleeping and the commit interval (default of 30 seconds) has not yet
elapsed since the last time it committed a transaction;
6) So after stopping the transaction kthread we still have the transaction
used to update the qgroup status item open. At close_ctree(), when the
filesystem is in RO mode and no transaction abort happened (or the
filesystem is in error mode), we do not expect to have any transaction
open, so we do not call btrfs_commit_super();
7) We then proceed to destroy the work queues, free the roots and block
groups, etc. After that we drop the last reference on the btree inode
by calling iput() on it. Since there are dirty pages for the btree
inode, corresponding to the COWed extent buffer for the quotas btree,
btree_write_cache_pages() is invoked to flush those dirty pages. This
results in creating a bio and submitting it, which makes us end up at
btrfs_submit_metadata_bio();
8) At btrfs_submit_metadata_bio() we end up at the if-then-else branch
that calls btrfs_wq_submit_bio(), because check_async_write() returned
a value of 1. This value of 1 is because we did not have hardware
acceleration available for crc32c, so BTRFS_FS_CSUM_IMPL_FAST was not
set in fs_info->flags;
9) Then at btrfs_wq_submit_bio() we call btrfs_queue_work() against the
workqueue at fs_info->workers, which was already freed before by the
call to btrfs_stop_all_workers() at close_ctree(). This results in an
invalid memory access due to a use-after-free, leading to a crash.
When this happens, before the crash there are several warnings triggered,
since we have reserved metadata space in a block group, the delayed refs
reservation, etc:
Finally when we remove the btrfs module (rmmod btrfs), there are several
warnings about objects that were allocated from our slabs but were never
freed, consequence of the transaction that was never committed and got
leaked:
=============================================================================
BUG btrfs_delayed_ref_head (Tainted: G B W ): Objects remaining in btrfs_delayed_ref_head on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Fix this issue by having the remount path stop the qgroup rescan worker
when we are remounting RO and teach the rescan worker to stop when a
remount is in progress. If later a remount in RW mode happens, we are
already resuming the qgroup rescan worker through the call to
btrfs_qgroup_rescan_resume(), so we do not need to worry about that.
Tested-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
t = ip_set_alloc(htable_size(htable_bits));
if (!t) {
ret = -ENOMEM;
goto out;
}
t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));
Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.
If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.
This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.
Please notice the same log is displayed twice in the following steps:
$ export CROSS_COMPILE=<your-arc-compiler-prefix>
$ make -s ARCH=arc defconfig
$ make -j$(nproc) ARCH=arc uImage uImage.gz
[ snip ]
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
OBJCOPY arch/arc/boot/vmlinux.bin
OBJCOPY arch/arc/boot/vmlinux.bin
GZIP arch/arc/boot/vmlinux.bin.gz
GZIP arch/arc/boot/vmlinux.bin.gz
UIMAGE arch/arc/boot/uImage.gz
UIMAGE arch/arc/boot/uImage.gz
Image Name: Linux-5.10.0-rc4-00003-g62f23044
Created: Sun Nov 22 02:52:26 2020
Image Type: ARC Linux Kernel Image (gzip compressed)
Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB
Load Address: 80000000
Entry Point: 80004000
Image arch/arc/boot/uImage is ready
Image Name: Linux-5.10.0-rc4-00003-g62f23044
Created: Sun Nov 22 02:52:26 2020
Image Type: ARC Linux Kernel Image (gzip compressed)
Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB
Load Address: 80000000
Entry Point: 80004000
This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.
I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").
I highly recommend to avoid such build rules that cause a race condition.
Move the uImage rule to arch/arc/Makefile.
Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:
The top-level boot_targets (uImage and uImage.*) should be phony
targets. They just let Kbuild descend into arch/arc/boot/ and create
files there.
If a file exists in the top directory with the same name, the boot
image will not be created.
You can confirm it by the following steps:
$ export CROSS_COMPILE=<your-arc-compiler-prefix>
$ make -s ARCH=arc defconfig all # vmlinux will be built
$ touch uImage.gz
$ make ARCH=arc uImage.gz
CALL scripts/atomic/check-atomics.sh
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
# arch/arc/boot/uImage.gz is not created
arch/arc/boot/Makefile supports uImage.lzma, but you cannot do
'make uImage.lzma' because the corresponding target is missing
in arch/arc/Makefile. Add it.
I also changed the assignment operator '+=' to ':=' since this is the
only place where we expect this variable to be set.
$ export CROSS_COMPILE=<your-arc-compiler-prefix>
$ make -s ARCH=arc defconfig
$ make ARCH=arc bindeb-pkg
SORTTAB vmlinux
SYSMAP System.map
MODPOST Module.symvers
make KERNELRELEASE=5.10.0-rc4 ARCH=arc KBUILD_BUILD_VERSION=2 -f ./Makefile intdeb-pkg
sh ./scripts/package/builddeb
cp: cannot stat 'arch/arc/boot/bootpImage': No such file or directory
make[4]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
make[3]: *** [Makefile:1527: intdeb-pkg] Error 2
make[2]: *** [debian/rules:13: binary-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[1]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
make: *** [Makefile:1527: bindeb-pkg] Error 2
The reason is obvious; arch/arc/Makefile sets $(boot)/bootpImage as
the default image, but there is no rule to build it.
Remove the meaningless KBUILD_IMAGE assignment so it will fallback
to the default vmlinux. With this change, you can build the deb package.
I removed the 'bootpImage' target as well. At best, it provides
'make bootpImage' as an alias of 'make vmlinux', but I do not see
much sense in doing so.
With external metadata device, flush requests are not passed down to the
data device.
Fix this by submitting the flush request in dm_integrity_flush_buffers. In
order to not degrade performance, we overlap the data device flush with
the metadata device flush.
Retry close command if it gets interrupted to not leak open handles on
the server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reported-by: Duncan Findlay <duncf@duncf.ca> Suggested-by: Pavel Shilovsky <pshilov@microsoft.com> Fixes: 6988a619f5b7 ("cifs: allow syscalls to be restarted in __smb_send_rqst()") Cc: stable@vger.kernel.org Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
close was relayered to allow passing in an async flag which
is no longer needed in this path. Remove the unneeded parameter
"flags" passed in on close.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block. It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched. If the mount point before had a longer
path than the current one, it can be reconstructed.
Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/". The super block buffer then contains
"/\x00edia/johnjdeveloper".
This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...
Fix this by using strncpy() instead of strlcpy(). The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h. The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.
We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:
cd /dev/shm
mkdir test/
fallocate -l 128M img
mkfs.ext4 -b 1024 img
mount img test/
dd if=/dev/zero of=test/foo bs=1M count=128
mkdir test/dir/ && cd test/dir/
for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
/dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
ext4_rename will return ENOSPC!!
cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
We will get the output:
"ls: cannot access 'test/dir/file1': Structure needs cleaning"
and the dmesg show:
"EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
deleted inode referenced: 139"
ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.
Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Fixes: cd808deced43 ("ext4: support RENAME_WHITEOUT") Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.
The CPU mode takeover code added in commit 5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".
This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.
Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
(cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows.
EEXIST was caught by insert_state() because of the duplicate end and
extent_io_tree_panic() was called.
Add overflow check of chunk item end to tree checker so it can be
detected early at mount time.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.
Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.
Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the origin device has a volatile write-back cache and the following
events occur:
1: After finishing merge operation of one set of exceptions,
merge_callback() is invoked.
2: Update the metadata in COW device tracking the merge completion.
This update to COW device is flushed cleanly.
3: System crashes and the origin device's cache where the recent
merge was completed has not been flushed.
During the next cycle when we read the metadata from the COW device,
we will skip reading those metadata whose merge was completed in
step (1). This will lead to data loss/corruption.
To address this, flush the origin device post merge IO before
updating the metadata.
Block core warned that discard_granularity was 0 for dm-raid with
personality of raid1. Reason is that raid_io_hints() was incorrectly
special-casing raid1 rather than raid0.
Fix raid_io_hints() by removing discard limits settings for
raid1. Check for raid0 instead.
Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Stephan Bärwolf <stephan@matrixstorm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is because of the recent buffer overflow detection in the
commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in
fortified string functions")
Here acpi_device_bus_id->bus_id can only hold 14 characters, while the
the acpi_device_hid(device) returns a 22-char string
"HYPER_V_GEN_COUNTER_V1".
Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a
string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8
chars.
The field bus_id in struct acpi_device_bus_id was originally defined as
char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the
commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI
devices")
Fix the issue by changing the field bus_id to const char *, and use
kstrdup_const() to initialize it.
Signed-off-by: Dexuan Cui <decui@microsoft.com> Tested-By: Jethro Beekman <jethro@fortanix.com>
[ rjw: Subject change, whitespace adjustment ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().
Reorder the free using the variable pd.
Cc: stable@vger.kernel.org Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LLVM-built Linux triggered a boot hangup with KASLR enabled.
arch/mips/kernel/relocate.c:get_random_boot() uses linux_banner,
which is a string constant, as a random seed, but accesses it
as an array of unsigned long (in rotate_xor()).
When the address of linux_banner is not aligned to sizeof(long),
such access emits unaligned access exception and hangs the kernel.
Use PTR_ALIGN() to align input address to sizeof(long) and also
align down the input length to prevent possible access-beyond-end.
The compressed payload is not necesarily 4-byte aligned, at least when
compiling with Clang. In that case, the 4-byte value appended to the
compressed payload that corresponds to the uncompressed kernel image
size must be read using get_unaligned_le32().
This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic
JZ4770 board).
Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel") Cc: <stable@vger.kernel.org> # v4.7 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building mips tinyconfig with clang the following warning show up:
arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
register long sp __asm__("$sp");
^
= 0
1 warning generated.
Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:
"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]
"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::). [...]".
[1] https://docs.w3cub.com/gcc~10/local-register-variables Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building mips tinyconfig with clang the following error show up:
WARNING: modpost: vmlinux.o(.text+0x1940c): Section mismatch in reference from the function r4k_cache_init() to the function .init.text:loongson3_sc_init()
The function r4k_cache_init() references
the function __init loongson3_sc_init().
This is often because r4k_cache_init lacks a __init
annotation or the annotation of loongson3_sc_init is wrong.
Remove marked __init from function loongson3_sc_init(),
mips_sc_probe_cm3(), and mips_sc_probe().
Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
We've observed crashes due to an empty cpu mask in
hyperv_flush_tlb_others. Obviously the cpu mask in question is changed
between the cpumask_empty call at the beginning of the function and when
it is actually used later.
One theory is that an interrupt comes in between and a code path ends up
changing the mask. Move the check after interrupt has been disabled to
see if it fixes the issue.
A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.
I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.
Fixes: db432b414e20 ("ASoC: Do DAPM power checks only for widgets changed since last run") Cc: stable@vger.kernel.org Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some extent io trees are initialized with NULL private member (e.g.
btrfs_device::alloc_state and btrfs_fs_info::excluded_extents).
Dereference of a NULL tree->private as inode pointer will cause panic.
Pass tree->fs_info as it's known to be valid in all cases.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 Fixes: 05912a3c04eb ("btrfs: drop extent_io_ops::tree_fs_info callback") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL. In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.
Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:
To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.
We reset the guest's view of PMCR_EL0 unconditionally, based on
the host's view of this register. It is however legal for an
implementation not to provide any PMU, resulting in an UNDEF.
The obvious fix is to skip the reset of this shadow register
when no PMU is available, sidestepping the issue entirely.
If no PMU is available, the guest is not able to request
a virtual PMU anyway, so not doing nothing is the right thing
to do!
It is unlikely that this bug can hit any HW implementation
though, as they all provide a PMU. It has been found using nested
virt with the host KVM not implementing the PMU itself.
Fixes: ab9468340d2bc ("arm64: KVM: Add access handler for PMCR register") Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201210083059.1277162-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'
Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again
Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mlx5e_create_ttc_table_groups() frees ft->g on failure of
kvzalloc(), but such failure will be caught by its caller
in mlx5e_create_ttc_table() and ft->g will be freed again
in mlx5e_destroy_flow_table(). The same issue also occurs
in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after
kfree() to avoid double free.
Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets") Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When mlx5_create_flow_group() fails, ft->g should be
freed just like when kvzalloc() fails. The caller of
mlx5e_create_l2_table_groups() does not catch this
issue on failure, which leads to memleak.
Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:
CC net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
IFF_UP = 1<<0, /* sysfs */
^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
IFF_UP = 0x1, /* Interface is up. */
The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.
Dropping #include <linux/if.h> resolves the issue and it is
not needed for compilation anyhow.
When irq_domain_get_irq_data() or irqd_cfg() fails
at i == 0, data allocated by kzalloc() has not been
freed before returning, which leads to memleak.
Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init':
pblk-init.c:(.text+0x2654): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit':
pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow
Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow
Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.
dma_async_device_register() can return non-zero error code. Add
condition to check the return value of dma_async_device_register
function and handle the error path.
'mtk_hsdma_hw_deinit()' should be called in the error handling path of the
probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already
done in the remove function.
gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to
it to be terminated with a zero-ed out entry.
So we need to allocate one more entry then we will use.
Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and
SPI registers content may have been lost.
* If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit,
better to select FTHLV = 2, 4, 6 etc
* If SPI data register is accessed as a 32-bit register and DSIZE > 8bit,
better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit,
better to select FTHLV = 4, 8, 12 etc
Signed-off-by: Roman Guskov <rguskov@dh-electronics.com> Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there is an unlikely case where cpufreq_cpu_get() returns a
NULL policy and this will cause a NULL pointer dereference later on.
Fix this by passing the policy to transition_frequency_fidvid() from
the caller and hence eliminating the need for the cpufreq_cpu_get()
and cpufreq_cpu_put().
Thanks to Viresh Kumar for suggesting the fix.
Addresses-Coverity: ("Dereference null return") Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()") Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.
The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: Dan Murphy <dmurphy@ti.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the dw_edma_alloc_burst() function fails then we free "chunk" but
it's still on the "desc->chunk->list" list so it will lead to a use
after free. Also the "->chunks_alloc" count is incremented when it
shouldn't be.
In current kernels small allocations are guaranteed to succeed and
dw_edma_alloc_burst() can't fail so this will not actually affect
runtime.
If the i2c device SCL bus being pulled up due to some exception before
message transfer done, the system cannot receive the completing interrupt
signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT
jiffies eclipse, that would make the system seemed hang up. To avoid that
happen, this patch adds a specific timeout for message transfer.
On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.
It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.
This came apparent after commit 21b2cec61c04 ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this
oops:
omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
...
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)
Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer") Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
[tony@atomide.com: left out extra parens, trimmed description stack trace] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As reported by syzbot below, kfifo_alloc'd memory would not be freed
if a non-zero return value is triggered in wacom_probe. This patch
creates and uses devm_kfifo_alloc to allocate and free itself.
If we are using edge IRQs, new samples can arrive while processing
current interrupt since there are no hw guarantees the irq line
stays "low" long enough to properly detect the new interrupt.
In this case the new sample will be missed.
Polling FIFO status register in st_lsm6dsx_handler_thread routine
allow us to read new samples even if the interrupt arrives while
processing previous data and the timeslot where the line is "low"
is too short to be properly detected.
Fixes: 89ca88a7cdf2 ("iio: imu: st_lsm6dsx: support active-low interrupts") Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: manual backport to old irq handler path] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Basically, consider .text.{hot|unlikely|unknown}.* part of .text, too.
When compiling with profiling information (collected via PGO
instrumentations or AutoFDO sampling), Clang will separate code into
.text.hot, .text.unlikely, or .text.unknown sections based on profiling
information. After D79600 (clang-11), these sections will have a
trailing `.` suffix, ie. .text.hot., .text.unlikely., .text.unknown..
When using -ffunction-sections together with profiling infomation,
either explicitly (FGKASLR) or implicitly (LTO), code may be placed in
sections following the convention:
.text.hot.<foo>, .text.unlikely.<bar>, .text.unknown.<baz>
where <foo>, <bar>, and <baz> are functions. (This produces one section
per function; we generally try to merge these all back via linker script
so that we don't have 50k sections).
For the above cases, we need to teach our linker scripts that such
sections might exist and that we'd explicitly like them grouped
together, otherwise we can wind up with code outside of the
_stext/_etext boundaries that might not be mapped properly for some
architectures, resulting in boot failures.
If the linker script is not told about possible input sections, then
where the section is placed as output is a heuristic-laiden mess that's
non-portable between linkers (ie. BFD and LLD), and has resulted in many
hard to debug bugs. Kees Cook is working on cleaning this up by adding
--orphan-handling=warn linker flag used in ARCH=powerpc to additional
architectures. In the case of linker scripts, borrowing from the Zen of
Python: explicit is better than implicit.
Also, ld.bfd's internal linker script considers .text.hot AND
.text.hot.* to be part of .text, as well as .text.unlikely and
.text.unlikely.*. I didn't see support for .text.unknown.*, and didn't
see Clang producing such code in our kernel builds, but I see code in
LLVM that can produce such section names if profiling information is
missing. That may point to a larger issue with generating or collecting
profiles, but I would much rather be safe and explicit than have to
debug yet another issue related to orphan section placement.
Shakeel Butt reported in [1] that a user can request a task to be moved
to a resource group even if the task is already in the group. It just
wastes time to do the move operation which could be costly to send IPI
to a different CPU.
Add a sanity check to ensure that the move operation only happens when
the task is not already in the resource group.
Currently, when moving a task to a resource group the PQR_ASSOC MSR is
updated with the new closid and rmid in an added task callback. If the
task is running, the work is run as soon as possible. If the task is not
running, the work is executed later in the kernel exit path when the
kernel returns to the task again.
Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task
is running is the right thing to do. Queueing work for a task that is
not running is unnecessary (the PQR_ASSOC MSR is already updated when
the task is scheduled in) and causing system resource waste with the way
in which it is implemented: Work to update the PQR_ASSOC register is
queued every time the user writes a task id to the "tasks" file, even if
the task already belongs to the resource group.
This could result in multiple pending work items associated with a
single task even if they are all identical and even though only a single
update with most recent values is needed. Specifically, even if a task
is moved between different resource groups while it is sleeping then it
is only the last move that is relevant but yet a work item is queued
during each move.
This unnecessary queueing of work items could result in significant
system resource waste, especially on tasks sleeping for a long time.
For example, as demonstrated by Shakeel Butt in [1] writing the same
task id to the "tasks" file can quickly consume significant memory. The
same problem (wasted system resources) occurs when moving a task between
different resource groups.
As pointed out by Valentin Schneider in [2] there is an additional issue
with the way in which the queueing of work is done in that the task_struct
update is currently done after the work is queued, resulting in a race with
the register update possibly done before the data needed by the update is
available.
To solve these issues, update the PQR_ASSOC MSR in a synchronous way
right after the new closid and rmid are ready during the task movement,
only if the task is running. If a moved task is not running nothing
is done since the PQR_ASSOC MSR will be updated next time the task is
scheduled. This is the same way used to update the register when tasks
are moved as part of resource group removal.
CPL_ABORT_RPL is sent after releasing the resources by calling
chtls_release_resources(sk); and chtls_conn_done(sk);
eventually causing kernel panic. Fixing it by calling release
in appropriate order.
The skb is unlinked twice, one in __skb_dequeue in function
chtls_reset_synq() and another in cleanup_syn_rcv_conn().
So in this patch using skb_peek() instead of __skb_dequeue(),
so that unlink will be handled only in cleanup_syn_rcv_conn().
At the time of SYN_RECV, connection information is not
initialized at FW, updating tcb flag over uninitialized
connection causes adapter crash. We don't need to
update the flag during SYN_RECV state, so avoid this.
send_abort_rpl() is not calculating cpl_abort_req_rss offset and
ends up sending wrong TID with abort_rpl WR causng tid leaks.
Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is
redundant.
Prior to this patch, configuring speed to 50G with autoneg off over
devices supporting 50G per lane failed.
Support for 50G per lane introduced a new set of link-modes, on which
driver always performed a speed validation as if only legacy link-modes
were configured. Fix driver speed validation to force setting autoneg
over 56G only if in legacy link-mode.
Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().
Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.
Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the error return paths don't kfree lmac and lmac->name
leading to some memory leaks. Fix this by adding two error return
paths that kfree these objects
Addresses-Coverity: ("Resource leak") Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conntrack reassembly records the largest fragment size seen in IPCB.
However, when this gets forwarded/transmitted, fragmentation will only
be forced if one of the fragmented packets had the DF bit set.
In that case, a flag in IPCB will force fragmentation even if the
MTU is large enough.
This should work fine, but this breaks with ip tunnels.
Consider client that sends a UDP datagram of size X to another host.
The client fragments the datagram, so two packets, of size y and z, are
sent. DF bit is not set on any of these packets.
Middlebox netfilter reassembles those packets back to single size-X
packet, before routing decision.
packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit
isn't set. At output time, ip refragmentation is skipped as well
because x is still smaller than the mtu of the output device.
If ttransmit device is an ip tunnel, the packet size increases to
x+overhead.
Also, tunnel might be configured to force DF bit on outer header.
In this case, packet will be dropped (exceeds MTU) and an ICMP error is
generated back to sender.
But sender already respects the announced MTU, all the packets that
it sent did fit the announced mtu.
Force refragmentation as per original sizes unconditionally so ip tunnel
will encapsulate the fragments instead.
The only other solution I see is to place ip refragmentation in
the ip_tunnel code to handle this case.
Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet") Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason ip_tunnel insist on setting the DF bit anyway when the
inner header has the DF bit set, EVEN if the tunnel was configured with
'nopmtudisc'.
This means that the script added in the previous commit
cannot be made to work by adding the 'nopmtudisc' flag to the
ip tunnel configuration. Doing so breaks connectivity even for the
without-conntrack/netfilter scenario.
When nopmtudisc is set, the tunnel will skip the mtu check, so no
icmp error is sent to client. Then, because inner header has DF set,
the outer header gets added with DF bit set as well.
IP stack then sends an error to itself because the packet exceeds
the device MTU.
Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.") Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change.
These tests explicitly test for a recently discovered problem in the
IPv6 routing framework where PMTU exceptions were not properly released
when replacing a route via "ip route change ...".
After creating PMTU exceptions, the route from the device A to R1 will be
replaced with a new route, then device A will be deleted. If the PMTU
exceptions were properly cleaned up by the kernel, this device deletion
will succeed. Otherwise, the unregistration of the device will stall, and
messages such as the following will be logged in dmesg:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4
projects / thirdparty / kernel / stable.git / log
