Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.
Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.
Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.
Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two patches listed below removed ctnetlink_dump_helpinfo call from under
rcu_read_lock. Now its rcu_dereference generates following warning:
=============================
WARNING: suspicious RCU usage
5.13.0+ #5 Not tainted
-----------------------------
net/netfilter/nf_conntrack_netlink.c:221 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
stack backtrace:
CPU: 1 PID: 2251 Comm: conntrack Not tainted 5.13.0+ #5
Call Trace:
dump_stack+0x7f/0xa1
ctnetlink_dump_helpinfo+0x134/0x150 [nf_conntrack_netlink]
ctnetlink_fill_info+0x2c2/0x390 [nf_conntrack_netlink]
ctnetlink_dump_table+0x13f/0x370 [nf_conntrack_netlink]
netlink_dump+0x10c/0x370
__netlink_dump_start+0x1a7/0x260
ctnetlink_get_conntrack+0x1e5/0x250 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x613/0x993 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x55/0x120 [nfnetlink]
netlink_unicast+0x181/0x260
netlink_sendmsg+0x23f/0x460
sock_sendmsg+0x5b/0x60
__sys_sendto+0xf1/0x160
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x36/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.
Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op")
introduced .rmu_disable() method with implementation for several models,
but forgot to add Topaz, which can use the Peridot implementation.
Use the Peridot implementation of .rmu_disable() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
introduced .port_set_policy() method with implementation for several
models, but forgot to add Topaz, which can use the 6352 implementation.
Use the 6352 implementation of .port_set_policy() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Nanyong Sun [Tue, 20 Jul 2021 08:20:48 +0000 (16:20 +0800)]
mm: slab: fix kmem_cache_create failed when sysfs node not destroyed
The commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root
kmem_cache destroy") introduced a problem: If one thread destroy a
kmem_cache A and another thread concurrently create a kmem_cache B,
which is mergeable with A and has same size with A, the B may fail to
create due to the duplicate sysfs node.
The scenario in detail:
1) Thread 1 uses kmem_cache_destroy() to destroy kmem_cache A which is
mergeable, it decreases A's refcount and if refcount is 0, then call
memcg_set_kmem_cache_dying() which set A->memcg_params.dying = true,
then unlock the slab_mutex and call flush_memcg_workqueue(), it may cost
a while.
Note: now the sysfs node(like '/kernel/slab/:0000248') of A is still
present, it will be deleted in shutdown_cache() which will be called
after flush_memcg_workqueue() is done and lock the slab_mutex again.
2) Now if thread 2 is coming, it use kmem_cache_create() to create B, which
is mergeable with A(their size is same), it gain the lock of slab_mutex,
then call __kmem_cache_alias() trying to find a mergeable node, because
of the below added code in commit d38a2b7a9c93 ("mm: memcg/slab: fix
memory leak at non-root kmem_cache destroy"), B is not mergeable with
A whose memcg_params.dying is true.
int slab_unmergeable(struct kmem_cache *s)
if (s->refcount < 0)
return 1;
/*
* Skip the dying kmem_cache.
*/
if (s->memcg_params.dying)
return 1;
return 0;
}
So B has to create its own sysfs node by calling:
create_cache->
__kmem_cache_create->
sysfs_slab_add->
kobject_init_and_add
Because B is mergeable itself, its filename of sysfs node is based on its size,
like '/kernel/slab/:0000248', which is duplicate with A, and the sysfs
node of A is still present now, so kobject_init_and_add() will return
fail and result in kmem_cache_create() fail.
Concurrently modprobe and rmmod the two modules below can reproduce the issue
quickly: nf_conntrack_expect, se_sess_cache. See call trace in the end.
LTS versions of v4.19.y and v5.4.y have this problem, whereas linux versions after
v5.9 do not have this problem because the patchset: ("The new cgroup slab memory
controller") almost refactored memcg slab.
A potential solution(this patch belongs): Just let the dying kmem_cache be mergeable,
the slab_mutex lock can prevent the race between alias kmem_cache creating thread
and root kmem_cache destroying thread. In the destroying thread, after
flush_memcg_workqueue() is done, judge the refcount again, if someone
reference it again during un-lock time, we don't need to destroy the kmem_cache
completely, we can reuse it.
Another potential solution: revert the commit d38a2b7a9c93 ("mm: memcg/slab:
fix memory leak at non-root kmem_cache destroy"), compare to the fail of
kmem_cache_create, the memory leak in special scenario seems less harmful.
Call trace:
sysfs: cannot create duplicate filename '/kernel/slab/:0000248'
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x24/0x30
dump_stack+0xb0/0x100
sysfs_warn_dup+0x6c/0x88
sysfs_create_dir_ns+0x104/0x120
kobject_add_internal+0xd0/0x378
kobject_init_and_add+0x90/0xd8
sysfs_slab_add+0x16c/0x2d0
__kmem_cache_create+0x16c/0x1d8
create_cache+0xbc/0x1f8
kmem_cache_create_usercopy+0x1a0/0x230
kmem_cache_create+0x50/0x68
init_se_kmem_caches+0x38/0x258 [target_core_mod]
target_core_init_configfs+0x8c/0x390 [target_core_mod]
do_one_initcall+0x54/0x230
do_init_module+0x64/0x1ec
load_module+0x150c/0x16f0
__se_sys_finit_module+0xf0/0x108
__arm64_sys_finit_module+0x24/0x30
el0_svc_common+0x80/0x1c0
el0_svc_handler+0x78/0xe0
el0_svc+0x10/0x260
kobject_add_internal failed for :0000248 with -EEXIST, don't try to register things with the same name in the same directory.
kmem_cache_create(se_sess_cache) failed with error -17
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x24/0x30
dump_stack+0xb0/0x100
kmem_cache_create_usercopy+0xa8/0x230
kmem_cache_create+0x50/0x68
init_se_kmem_caches+0x38/0x258 [target_core_mod]
target_core_init_configfs+0x8c/0x390 [target_core_mod]
do_one_initcall+0x54/0x230
do_init_module+0x64/0x1ec
load_module+0x150c/0x16f0
__se_sys_finit_module+0xf0/0x108
__arm64_sys_finit_module+0x24/0x30
el0_svc_common+0x80/0x1c0
el0_svc_handler+0x78/0xe0
el0_svc+0x10/0x260
The casefolding feature is only supported when CONFIG_UNICODE is set.
This modifies the feature list f2fs presents under sysfs accordingly.
Fixes: 5aba54302a46 ("f2fs: include charset encoding information in the superblock") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the turris-mox-rwtm firmware node from Turris MOX' device tree into
the generic armada-37xx.dtsi file and use the generic compatible string
'marvell,armada-3700-rwtm-firmware' instead of the current one.
Turris MOX DTS file contains also old compatible string for backward
compatibility.
The Turris MOX rWTM firmware can be used on any Armada 37xx device,
giving them access to the rWTM hardware random number generator, which
is otherwise unavailable.
This change allows Linux to load the turris-mox-rwtm.ko module on these
boards.
Tested on ESPRESSObin v5 with both default Marvell WTMI firmware and
CZ.NIC's firmware. With default WTMI firmware the turris-mox-rwtm fails
to probe, while with CZ.NIC's firmware it registers the HW random number
generator.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing CALL_ON_STACK() macro allows for subtle bugs:
- There is no type checking of the function that is being called. That
is: missing or too many arguments do not cause any compile error or
warning. The same is true if the return type of the called function
changes. This can lead to quite random bugs.
- Sign and zero extension of arguments is missing. Given that the s390
C ABI requires that the caller of a function performs proper sign
and zero extension this can also lead to subtle bugs.
- If arguments to the CALL_ON_STACK() macros contain functions calls
register corruption can happen due to register asm constructs being
used.
Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.
The time remaining until expiry of the refresh_timer can be negative.
Casting the type to an unsigned 64-bit value will cause integer
underflow, making the runtime_refresh_within return false instead of
true. These situations are rare, but they do happen.
This does not cause user-facing issues or errors; other than
possibly unthrottling cfs_rq's using runtime from the previous period(s),
making the CFS bandwidth enforcement less strict in those (special)
situations.
Signed-off-by: Odin Ugedal <odin@uged.al> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Link: https://lore.kernel.org/r/20210629121452.18429-1-odin@uged.al Signed-off-by: Sasha Levin <sashal@kernel.org>
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com Reported-by: Wu Bo <wubo40@huawei.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.
[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]
Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension") Signed-off-by: Sasha Levin <sashal@kernel.org>
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races. With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.
To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.
If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.
Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.
drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this
clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe
refclock is not fed in via the refclock pads. While this mode is not
supported (yet) in the driver it doesn't hurt to make sure we are
providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So
the current setup, which drives it straight from the 25MHz oscillator is
actually overclocking the AUX input.
On LS2088A-RDB board, if the spi-fsl-dspi driver is built as module
then its probe fails with the following warning:
[ 10.471363] couldn't get idr
[ 10.471381] WARNING: CPU: 4 PID: 488 at drivers/spi/spi.c:2689 spi_register_controller+0x73c/0x8d0
...
[ 10.471651] fsl-dspi 2100000.spi: Problem registering DSPI ctlr
[ 10.471708] fsl-dspi: probe of 2100000.spi failed with error -16
Reason for the failure is that bus-num property is set for dspi node.
However, bus-num property is not set for the qspi node. If probe for
spi-fsl-qspi happens first then id 0 is dynamically allocated to it.
Call to spi_register_controller() from spi-fsl-dspi driver then fails.
Since commit 29d2daf2c33c ("spi: spi-fsl-dspi: Make bus-num property
optional") bus-num property is optional. Remove bus-num property from
dspi node to fix the issue.
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
The ti,no-reset-on-init flag need to be at the interconnect target module
level for the modules that have it defined.
The ti-sysc driver handles this case, but produces warning, not a critical
issue.
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.
Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.
This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.
Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 3ce3e45cc333 ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge") Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value") Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()") Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fixed value of 157 used in the calculations are only correct for
M3-W, on other Gen3 SoC it should be 167. The constant can be derived
correctly from the static TJ_3 constant and the SoC specific TJ_1 value.
Update the calculation be correct on all Gen3 SoCs.
The i2c bus can freeze at the end of transaction so the bus can no longer work.
This scenario is improved by adding scl/sda gpios definitions to implement the
i2c bus recovery mechanism.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To make the ethernet cable plugin detection reliable the
power detection of the smsc phy has been disabled.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix ethernet reset time properties as described in
Documentation/devicetree/bindings/net/ethernet-phy.yaml
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.
Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When call irq_get_irq_data() to get the IRQ's irq_data failed, an
appropriate error code -ENOENT should be returned. However, we directly
return 'err', which records the IRQ number instead of the error code.
Fixes: 139251fc2208 ("firmware: tegra: add bpmp driver for Tegra210") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected
Change the first clock name to match the DT bindings.
This has no effect on actual operation, as the Display Unit driver in
Linux does not use the first clock name on R-Car H1, but just grabs the
first clock.
The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator). Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code. Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".
Fixes: 92589c986b33 ("rtc-proc: permit the /proc/driver/rtc device to use other devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
When no child nodes are matched, an appropriate error code -ENODEV should
be returned. However, we currently do not explicitly assign this error
code to 'err'. As a result, 0 was incorrectly returned.
Fixes: fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210515040004.6983-1-thunder.leizhen@huawei.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver") Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620789283-15048-1-git-send-email-zou_wei@huawei.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Two ethernet node was added by
commit 95220046a62c ("ARM: dts: Add ethernet to a bunch of platforms")
and commit d6d0cef55e5b ("ARM: dts: Add the FOTG210 USB host to Gemini boards")
This patch removes the duplicate one.
Fixes: d6d0cef55e5b ("ARM: dts: Add the FOTG210 USB host to Gemini boards") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ld.lld warns that the '.modinfo' section is not currently handled:
ld.lld: warning: kernel/built-in.a(workqueue.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(printk/printk.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(irq/spurious.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(rcu/update.o):(.modinfo) is being placed in '.modinfo'
The '.modinfo' section was added in commit 898490c010b5 ("moduleparam:
Save information about built-in modules in separate file") to the DISCARDS
macro but Hexagon has never used that macro. The unification of DISCARDS
happened in commit 023bf6f1b8bf ("linker script: unify usage of discard
definition") in 2009, prior to Hexagon being added in 2011.
Switch Hexagon over to the DISCARDS macro so that anything that is
expected to be discarded gets discarded.
Link: https://lkml.kernel.org/r/20210521011239.1332345-3-nathan@kernel.org Fixes: e95bf452a9e2 ("Hexagon: Add configuration and makefiles for the Hexagon architecture.") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Brian Cain <bcain@codeaurora.org> Cc: David Rientjes <rientjes@google.com> Cc: Oliver Glitta <glittao@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for
whether or not ds->ds_clp has already been initialised, so we can end up
adding the same transports multiple times.
Fixes: fc821d59209d ("pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When 'SB_HW_16' check fails, the error code -ENODEV instead of 0 should be
returned, which is the same as that returned when 'WSS_HW_CMI8330' check
fails.
Fixes: 43bcd973d6d0 ("[ALSA] Add snd_card_set_generic_dev() call to ISA drivers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210707074051.2663-1-thunder.leizhen@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sk_user_data pointer is supposed to be modified only while
holding the write_lock "sk_callback_lock", otherwise
we could race with other threads and crash the kernel.
we can't take the write_lock in nvmet_tcp_state_change()
because it would cause a deadlock, but the release_work queue
will set the pointer to NULL later so we can simply remove
the assignment.
Fixes: b5332a9f3f3d ("nvmet-tcp: fix incorrect locking in state_change sk callback") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's unsafe to operate a vq from multiple threads.
Unfortunately this is exactly what we do when invoking
clean tx poll from rx napi.
Same happens with napi-tx even without the
opportunistic cleaning from the receive interrupt: that races
with processing the vq in start_xmit.
As a fix move everything that deals with the vq to under tx lock.
Fixes: b92f1e6751a6 ("virtio-net: transmit napi") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The .remove() callback disables clocks that were not enabled in
.probe(). So just probing and then unbinding the driver results in a clk
enable imbalance.
So just drop the call to disable the clocks. (Which BTW was also in the
wrong order because the call makes the PWM unfunctional and so should
have come only after pwmchip_remove()).
projects / thirdparty / kernel / stable.git / log
