The bq27xxx i2c-client may not have an IRQ, in which case
client->irq will be 0. bq27xxx_battery_i2c_probe() already has
an if (client->irq) check wrapping the request_threaded_irq().
But bq27xxx_battery_i2c_remove() unconditionally calls
free_irq(client->irq) leading to:
[ 190.310742] ------------[ cut here ]------------
[ 190.310843] Trying to free already-free IRQ 0
[ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310
Followed by a backtrace when unbinding the driver. Add
an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring
probe() to fix this.
Fixes: 444ff00734f3 ("power: supply: bq27xxx: Fix I2C IRQ race on remove") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240215155133.70537-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures
is not enough for a 64-bit phys_addr_t:
drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open':
drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size]
295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL);
| ^
In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.
While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.
As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):
After d0009effa886 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.
Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.
Changes in v3:
* clarify that upstream nft will not display such configuration properly and
that the output was generated with a patched nft tool
* remove example program from commit description and link to it instead
* no code changes otherwise
Changes in v2:
* restrict nft_(match/target)_validate() to classic iptables hooks
* rewrite example program to use unmodified libnftnl
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]
That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.
So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.
If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.
hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.
Fixes: 2f20216c1d6f ("Bluetooth: Emit controller suspend and resume events") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.
Here's the call trace observed on a ChromeOS device with Intel AX201:
queue_work_on+0x3e/0x6c
__hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
? init_wait_entry+0x31/0x31
__hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
process_one_work+0x1d8/0x33f
worker_thread+0x21b/0x373
kthread+0x13a/0x152
? pr_cont_work+0x54/0x54
? kthread_blkcg+0x31/0x31
ret_from_fork+0x1f/0x30
This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.
Fixes: c7741d16a57c ("Bluetooth: Perform a power cycle when receiving hardware error event") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.
Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.
Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.
Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
__skb_pull(skb, skb_network_offset(skb));
... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value.
The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.
The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.
The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel. The ipip encapsulation finds gre0 as next output device.
This results in the following pattern:
1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.
2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).
3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).
4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.
tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.
This repeats for every future packet:
gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.
For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.
Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.
After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.
The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.
v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.
Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ Fixes: 243aad830e8a ("ip_gre: include route header_len in max_headroom calculation") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported the following uninit-value access issue [1]:
netlink_to_full_skb() creates a new `skb` and puts the `skb->data`
passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data
size is specified as `len` and passed to skb_put_data(). This `len`
is based on `skb->end` that is not data offset but buffer offset. The
`skb->end` contains data and tailroom. Since the tailroom is not
initialized when the new `skb` created, KMSAN detects uninitialized
memory area when copying the data.
This patch resolved this issue by correct the len from `skb->end` to
`skb->len`, which is the actual data offset.
Some GigaDevice ecc_get_status functions use on-stack buffer for
spi_mem_op causes spi_mem_check_op failing, fix the issue by using
spinand scratchbuf.
Fixes: c40c7a990a46 ("mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG") Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231108150701.593912-1-han.xu@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The relevant changes to the already existing GD5F1GQ4UExxG support has
been determined by consulting the GigaDevice product change notice
AN-0392-10, version 1.0 from November 30, 2020.
As the overlaps are huge, variable names have been generalized
accordingly.
Apart from the lowered ECC strength (4 instead of 8 bits per 512 bytes),
the new device ID, and the extra quad IO dummy byte, no changes had to
be taken into account.
New hardware features are not supported, namely:
- Power on reset
- Unique ID
- Double transfer rate (DTR)
- Parameter page
- Random data quad IO
The inverted semantic of the "driver strength" register bits, defaulting
to 100% instead of 50% for the Q5 devices, got ignored as the driver has
never touched them anyway.
The no longer supported "read from cache during block erase"
functionality is not reflected as the current SPI NAND core does not
support it anyway.
Implementation has been tested on MediaTek MT7688 based GARDENA smart
Gateways using both, GigaDevice GD5F1GQ5UEYIG and GD5F1GQ4UBYIG.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210211113619.3502-1-code@reto-schneider.ch
Stable-dep-of: 59950610c0c0 ("mtd: spinand: gigadevice: Fix the get ecc status issue") Signed-off-by: Sasha Levin <sashal@kernel.org>
sizeof(struct virtio_crypto_akcipher_session_para) is less than
sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from
stack variable leads stack overflow. Clang reports this issue by
commands:
make -j CC=clang-14 mrproper >/dev/null 2>&1
make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1
make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/
virtio_crypto_akcipher_algs.o
Fixes: 59ca6c93387d ("virtio-crypto: implement RSA algorithm") Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.net/ Cc: <stable@vger.kernel.org> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: stable@vger.kernel.org Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour
entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so
the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field,
arp_flags. We initialise the field just after the memcpy(), so it's
not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN),
arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL)
in arp_ioctl() before calling arp_req_get().
To avoid the overflow, let's limit the max length of memcpy().
Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible
array in struct sockaddr") just silenced syzkaller.
As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.
Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).
Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.
Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.
After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT can't be used when we hold locks
since we are basically waiting for userspace to do something.
Holding a lock while doing so can trivial deadlock with page faults
etc...
So make lockdep complain when a driver tries to do this.
v2: Add lockdep_assert_none_held() macro.
v3: Add might_sleep() and also use lockdep_assert_none_held() in the
IOCTL path.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patchwork.freedesktop.org/patch/414944/
Stable-dep-of: 3c43177ffb54 ("drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set") Signed-off-by: Sasha Levin <sashal@kernel.org>
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Pointless else branch after goto makes the code harder to refactor
down the line.
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA") Signed-off-by: Sasha Levin <sashal@kernel.org>
'recv_end:' checks num_async and decrypted, and is then followed
by the 'end' label. Since we know that decrypted and num_async
are 0 at the start we can jump to 'end'.
Move the init of decrypted and num_async to let the compiler
catch if I'm wrong.
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA") Signed-off-by: Sasha Levin <sashal@kernel.org>
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn") Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Petr Machata <petrm@nvidia.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7d6027790ac ("arp: Prevent overflow in arp_req_get().") Signed-off-by: Sasha Levin <sashal@kernel.org>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.
JAZZ_ESP is a bool kconfig symbol that selects SCSI_SPI_ATTRS. When
CONFIG_SCSI=m, this results in SCSI_SPI_ATTRS=m while JAZZ_ESP=y, which
causes many undefined symbol linker errors.
Fix this by only offering to build this driver when CONFIG_SCSI=y.
[mkp: JAZZ_ESP is unique in that it does not support being compiled as a
module unlike the remaining SPI SCSI HBA drivers]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240214055953.9612-1-rdunlap@infradead.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402112222.Gl0udKyU-lkp@intel.com/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation") Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net Signed-off-by: Sasha Levin <sashal@kernel.org>
The px30 has two spi controllers with two chip-selects each.
The num-cs property is specified as the total number of chip
selects a controllers has and is used since 2020 to find uses
of chipselects outside that range in the Rockchip spi driver.
Without the property set, the default is 1, so spi devices
using the second chipselect will not be created.
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:
When dma_alloc_coherent fails to allocate dd->cr_base[i].va,
init_credit_return should deallocate dd->cr_base and
dd->cr_base[i] that allocated before. Or those resources
would be never freed and a memleak is triggered.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Link: https://lore.kernel.org/r/20240112085523.3731720-1-alexious@zju.edu.cn Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility that usb_role_switch device is unregistered before
the user put usb_role_switch. In this case, the user may still want to
get/set_role() since the user can't sense the changes of usb_role_switch.
This will add a flag to show if usb_role_switch is already registered and
avoid unwanted behaviors.
Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches")
cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current design, usb role class driver will get usb_role_switch parent's
module reference after the user get usb_role_switch device and put the
reference after the user put the usb_role_switch device. However, the
parent device of usb_role_switch may be removed before the user put the
usb_role_switch. If so, then, NULL pointer issue will be met when the user
put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then,
we don't need to find module by iterating long relations.
Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting")
cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is observed sometimes when tethering is used over NCM with Windows 11
as host, at some instances, the gadget_giveback has one byte appended at
the end of a proper NTB. When the NTB is parsed, unwrap call looks for
any leftover bytes in SKB provided by u_ether and if there are any pending
bytes, it treats them as a separate NTB and parses it. But in case the
second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that
were parsed properly in the first NTB and saved in rx_list are dropped.
In this case, the giveback is of 1025 bytes and block length is 1024.
The rest 1 byte (which is 0x00) won't be parsed resulting in drop of
all datagrams in rx_list.
Same is case with packets of size 2048:
[002] d..1 7828.557948: dwc3_gadget_giveback: ep1out:
req 0000000011dfd96e length 2049/16384 zsI ==> 0
[002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming
in from PC:
According to Windows driver, no ZLP is needed if wBlockLength is non-zero,
because the non-zero wBlockLength has already told the function side the
size of transfer to be expected. However, there are in-market NCM devices
that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize.
To deal with such devices, it pads an extra 0 at end so the transfer is no
longer multiple of wMaxPacketSize.
Driver append an additional zero packet request when queue a packet, which
length mod max packet size is 0. When transfer complete, run to line 831,
usb_gadget_giveback_request() will free this requestion. 836 condition is
true, so cdns3_gadget_ep_free_request() free this request again.
Add check at line 829, skip call usb_gadget_giveback_request() if it is
additional zero length packet request. Needn't call
usb_gadget_giveback_request() because it is allocated in this driver.
Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is infrastructure to rewrite return thunks to point to any
random thunk one desires, unwrap that from CALL_THUNKS, which up to
now was the sole user of that.
[ bp: Make the thunks visible on 32-bit and add ifdeffery for the
32-bit builds. ]
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tom Parkin <tparkin@katalix.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
Unfortunately the commit `fd8958efe877` introduced another error
causing the `descs` array to overflow. This reults in further crashes
easily reproducible by `sendmsg` system call.
If an SDMA send consists of exactly 6 descriptors and requires dword
padding (in the 7th descriptor), the sdma_txreq descriptor array is not
properly expanded and the packet will overflow into the container
structure. This results in a panic when the send completion runs. The
exact panic varies depending on what elements of the container structure
get corrupted. The fix is to use the correct expression in
_pad_sdma_tx_descs() to test the need to expand the descriptor array.
With this patch the crashes are no longer reproducible and the machine is
stable.
Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.
However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
__________________________________________________________
|_ direction of decompression --> ____ |_ compressed data _|
Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue. Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".
Let's strictly use the decompressed buffer for lz4 inplace
decompression for now. Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order.
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215a2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses") Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
P1 wb_workfn
jbd2_log_do_checkpoint
if (buffer_locked(bh)) // false
__block_write_full_page
trylock_buffer(bh)
test_clear_buffer_dirty(bh)
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
if (buffer_write_io_error(bh)) // false
>> bh IO error occurs <<
jbd2_cleanup_journal_tail
__jbd2_update_log_tail
jbd2_write_superblock
// The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].
Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X
//buffer A is dirty and not belones to any transaction
__buffer_relink_io() //move it to the IO list
__flush_batch()
write_dirty_buffer()
do_get_write_access()
clear_buffer_dirty
__jbd2_journal_file_buffer()
//add buffer A to a new transaction Y
lock_buffer(bh)
//doesn't write out
__jbd2_journal_remove_checkpoint()
//finish checkpoint except buffer A
//filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: e34c8dd238d0 ("jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint") Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that __jbd2_journal_remove_checkpoint() can detect buffer io error
and mark journal checkpoint error, then we abort the journal later
before updating log tail to ensure the filesystem works consistently.
So we could remove other redundant buffer io error checkes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210610112440.3438139-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: e34c8dd238d0 ("jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint") Signed-off-by: Sasha Levin <sashal@kernel.org>
We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.
We're currently doing accounting on the queue sync with an
atomic variable that counts down the number of remaining
notifications that we still need.
As we've been hitting issues in this area, modify this to
track a bitmap of queues, not just the number of queues,
and print out the remaining bitmap in the warning.
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Previous versions can be found at:
v1:
initial version
https://lkml.org/lkml/2020/10/28/921
v2:
do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip
the call of phy_ethtool_set_wol() instead.
https://lkml.org/lkml/2020/10/31/380
v3:
in function lan743x_ethtool_set_wol:
use ternary operator instead of if-else sentence (review by Markus Elfring)
return -ENETDOWN insted of -EIO (review by Andrew Lunn)
During renames we pin the logs of the roots a bit too early, before the
calls to btrfs_insert_inode_ref(). We can pin the logs after those calls,
since those will not change anything in a log tree.
In a scenario where we have multiple and diverse filesystem operations
running in parallel, those calls can take a significant amount of time,
due to lock contention on extent buffers, and delay log commits from other
tasks for longer than necessary.
So just pin logs after calls to btrfs_insert_inode_ref() and right before
the first operation that can update a log tree.
The following script that uses dbench was used for testing:
$ cat dbench-test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.
However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.
Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).
CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
btrfs_search_slot is called in multiple places in dir-item.c to search
for a dir entry, and then calling btrfs_match_dir_name to return a
btrfs_dir_item.
In order to reduce the number of callers of btrfs_search_slot, create a
common function that looks for the dir key, and if found call
btrfs_match_dir_item_name.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8dcbc26194eb ("btrfs: unify lookup return value when dir entry is missing") Signed-off-by: Sasha Levin <sashal@kernel.org>
We're seeing a weird problem in production where we have overlapping
extent items in the extent tree. It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem. Add a check to the tree-checker to make sure
that the extents do not overlap each other.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 02c0a3b3047f ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210813151116.23931-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 721858823d7c ("ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use") Signed-off-by: Sasha Levin <sashal@kernel.org>
In current ACPI-based devices, the DSDT does not include any of the
properties required by the codec driver. This is not an ACPI
limitation proper since the _DSD method could be used, as done for
Camera and SoundWire in newer platforms. For legacy devices, there is
unfortunately no other option than using a work-around: we add
properties to the codec device from the machine driver.
To avoid any issues with the codec driver being unbound, we need to
keep a reference to the codec device until the card is removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210813151116.23931-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 721858823d7c ("ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use") Signed-off-by: Sasha Levin <sashal@kernel.org>
The Macronix MX35LF2GE4AD / MX35LF4GE4AD are 3V, 2G / 4Gbit serial
SLC NAND flash device (with on-die ECC).
Validated by read, erase, read back, write, read back and nandtest
on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host
(drivers/spi/spi-mxic.c).
We've seen the in-flight count go into negative with some
internal stress testing in Microsoft.
Adding a WARN when this happens, in hope of understanding
why this happens when it happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
POWER10 DD1 has an issue where it generates watchpoint exceptions when
it shouldn't. The conditions where this occur are:
- octword op
- ending address of DAWR range is less than starting address of op
- those addresses need to be in the same or in two consecutive 512B
blocks
- 'op address + 64B' generates an address that has a carry into bit
52 (crosses 2K boundary)
Handle such spurious exception by considering them as extraneous and
emulating/single-steeping instruction without generating an event.
[ravi: Fixed build warning reported by lkp@intel.com] Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201106045650.278987-1-ravi.bangoria@linux.ibm.com
Stable-dep-of: 27646b2e02b0 ("powerpc/watchpoints: Annotate atomic context in more places") Signed-off-by: Sasha Levin <sashal@kernel.org>
Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:
finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).
When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.
Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.
While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.
If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.
Add support for CMPXCHG loops on userspace addresses. Provide both an
"unsafe" version for tight loops that do their own uaccess begin/end, as
well as a "safe" version for use cases where the CMPXCHG is not buried in
a loop, e.g. KVM will resume the guest instead of looping when emulation
of a guest atomic accesses fails the CMPXCHG.
Provide 8-byte versions for 32-bit kernels so that KVM can do CMPXCHG on
guest PAE PTEs, which are accessed via userspace addresses.
Guard the asm_volatile_goto() variation with CC_HAS_ASM_GOTO_TIED_OUTPUT,
the "+m" constraint fails on some compilers that otherwise support
CC_HAS_ASM_GOTO_OUTPUT.
Cc: stable@vger.kernel.org Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to the hashed-MAC optimisation one problem become visible:
hsr_handle_sup_frame() walks over the list of available nodes and merges
two node entries into one if based on the information in the supervision
both MAC addresses belong to one node. The list-walk happens on a RCU
protected list and delete operation happens under a lock.
If the supervision arrives on both slave interfaces at the same time
then this delete operation can occur simultaneously on two CPUs. The
result is the first-CPU deletes the from the list and the second CPUs
BUGs while attempting to dereference a poisoned list-entry. This happens
more likely with the optimisation because a new node for the mac_B entry
is created once a packet has been received and removed (merged) once the
supervision frame has been received.
Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field
which is set to true after the removal and checked before the removal.
Fixes: f266a683a4804 ("net/hsr: Better frame dispatch") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.
Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.
Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.
Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
When a GIC local interrupt is not routable, it's vl_map will be used
to control some internal states for core (providing IPTI, IPPCI, IPFDC
input signal for core). Overriding it will interfere core's intetrupt
controller.
Do not touch vl_map if a local interrupt is not routable, we are not
going to remap it.
Before dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on
irq_cpu_online()"), if a local interrupt is not routable, then it won't
be requested from GIC Local domain, and thus gic_all_vpes_irq_cpu_online
won't be called for that particular interrupt.
Fixes: dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230424103156.66753-2-jiaxun.yang@flygoat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
The power domain containing the Cortex-R7 CPU core on the R-Car V3H SoC
must always be in power-on state, unlike on other SoCs in the R-Car Gen3
family. See Table 9.4 "Power domains" in the R-Car Series, 3rd
Generation Hardware User’s Manual Rev.1.00 and later.
Fix this by marking the domain as a CPU domain without control
registers, so the driver will not touch it.
projects / thirdparty / kernel / stable.git / log
