A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case.
Correct some left shifts of the signed integer constant 1 by some
unsigned number less than 32. Change the constant to 1U to avoid
shifting a 1 into the sign bit.
The corrected functions are comedi_dio_insn_config(),
comedi_dio_update_state(), and __comedi_device_postconfig().
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test.
Reported-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c52293513298e0fd9a94 Fixes: 729988507680 ("staging: comedi: das16m1: tidy up the irq support in das16m1_attach()") Tested-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com Suggested-by: "Enju, Kohei" <enjuk@amazon.co.jp> Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20250707130908.70758-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: ad7a370c8be4 ("staging: comedi: aio_iiro_16: add command support for change of state detection") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20250707134622.75403-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().
Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IIO core issues warnings when a scan mask is a subset of a previous
entry in the available_scan_masks array.
On a board using a MAX11601, the following warning is observed:
max1363 1-0064: available_scan_mask 7 subset of 6. Never used
This occurs because the entries in the max11607_mode_list[] array are not
ordered correctly. To fix this, reorder the entries so that no scan mask is
a subset of an earlier one.
While at it, reorder the mode_list[] arrays for other supported chips as
well, to prevent similar warnings on different variants.
Note fixes tag dropped as these were introduced over many commits a long
time back and the side effect until recently was a reduction in sampling
rate due to reading too many channels when only a few were desired.
Now we have a sanity check that reports this error but that is not
where the issue was introduced.
Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"),
booting a board populated with a MAX11601 results in a flood of warnings:
max1363 1-0064: available_scan_mask 8 subset of 0. Never used
max1363 1-0064: available_scan_mask 9 subset of 0. Never used
max1363 1-0064: available_scan_mask 10 subset of 0. Never used
max1363 1-0064: available_scan_mask 11 subset of 0. Never used
max1363 1-0064: available_scan_mask 12 subset of 0. Never used
max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...
These warnings are caused by incorrect offsets used for differential
channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.
The max1363_mode_table[] defines the differential channel mappings as
follows:
Free the kfifo after unregistering the miscdev in
aspeed_lpc_disable_snoop() as the kfifo is initialised before the
miscdev in aspeed_lpc_enable_snoop().
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Cc: stable@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-1-3cdd59c934d3@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errata i2312 [0] for K3 silicon mentions the maximum obtainable
timeout through MMC host controller is 700ms. And for commands taking
longer than 700ms, hardware timeout should be disabled and software
timeout should be used.
The workaround for Errata i2312 can be achieved by adding
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci_am654.
Disable command queuing on Intel GLK-based Positivo models.
Without this quirk, CQE (Command Queuing Engine) causes instability
or I/O errors during operation. Disabling it ensures stable
operation on affected devices.
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result.
Cc: stable@vger.kernel.org Fixes: b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/b13c5225-7eff-448c-badc-a2c98e9bcaca@sabinyo.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes: 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET") Cc: stable@kernel.org Suggested-by: LongJun Tang <tanglongjun@kylinos.cn> Signed-off-by: Yun Lu <luyun@kylinos.cn> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the changes in commit 581073f626e3 ("af_packet: do not call
packet_read_pending() from tpacket_destruct_skb()"), every time
tpacket_destruct_skb() is executed, the skb_completion is marked as
completed. When wait_for_completion_interruptible_timeout() returns
completed, the pending_refcnt has not yet been reduced to zero.
Therefore, when ph is NULL, the wait function may need to be called
multiple times until packet_read_pending() finally returns zero.
We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO
constraint could be way off.
Fixes: 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()") Cc: stable@kernel.org Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yun Lu <luyun@kylinos.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new warning in clang [1] points out a place in pep_sock_accept() where
dst is uninitialized then passed as a const pointer to pep_find_pipe():
net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
829 | newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
| ^~~:
Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to
before the call to pep_find_pipe(), so that dst is consistently used
initialized throughout the function.
hid_hw_raw_request() is actually useful to ensure the provided buffer
and length are valid. Directly calling in the low level transport driver
function bypassed those checks and allowed invalid paramto be used.
Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250710-report-size-null-v2-3-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
When the report ID is not used, the low level transport drivers expect
the first byte to be 0. However, currently the allocated buffer not
account for that extra byte, meaning that instead of having 8 guaranteed
bytes for implement to be working, we only have 7.
Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Suggested-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20250710-report-size-null-v2-1-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma_sync_sg_for_device() functions should be called with the same
nents as the dma_map_sg(), not the value the map function returned
according to the documentation in Documentation/core-api/dma-api.rst:450:
With the sync_sg API, all the parameters must be the same
as those passed into the sg mapping API.
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec") Cc: stable@vger.kernel.org Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately.
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode.
Fixes: 49d46e3c7e59 ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
Synthesize the TSA CPUID feature bits for guests. Set TSA_{SQ,L1}_NO on
unaffected machines.
[ backporting notes: 5.10 doesn't have the KVM-only CPUID leafs so
allocate a separate capability leaf for CPUID_8000_0021_ECX to avoid
backporting the world and more. ]
Only select ARCH_WANT_HUGE_PMD_SHARE on 64-bit x86.
Page table sharing requires at least three levels because it involves
shared references to PMD tables; 32-bit x86 has either two-level paging
(without PAE) or three-level paging (with PAE), but even with
three-level paging, having a dedicated PGD entry for hugetlb is only
barely possible (because the PGD only has four entries), and it seems
unlikely anyone's actually using PMD sharing on 32-bit.
Having ARCH_WANT_HUGE_PMD_SHARE enabled on non-PAE 32-bit X86 (which
has 2-level paging) became particularly problematic after commit 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count"),
since that changes `struct ptdesc` such that the `pt_mm` (for PGDs) and
the `pt_share_count` (for PMDs) share the same union storage - and with
2-level paging, PMDs are PGDs.
(For comparison, arm64 also gates ARCH_WANT_HUGE_PMD_SHARE on the
configuration of page tables such that it is never enabled with 2-level
paging.)
Closes: https://lore.kernel.org/r/srhpjxlqfna67blvma5frmy3aa@altlinux.org Fixes: cfe28c5d63d8 ("x86: mm: Remove x86 version of huge_pmd_share.") Reported-by: Vitaly Chikunov <vt@altlinux.org> Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Vitaly Chikunov <vt@altlinux.org>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250702-x86-2level-hugetlb-v2-1-1a98096edf92%40google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-2-dongli.zhang@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[ Resolved conflicts in drivers/vhost/scsi.c
bacause vhost_scsi_complete_cmd_work() has been refactored. ] Signed-off-by: Xinyu Zheng <zhengxinyu6@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").
Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.
[ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
Ignore HID interface. The device is working properly.
When compiling with clang (19.1.7), initializing *vp using a compound
literal may result in excessive stack usage. Fix it by initializing the
required fields of *vp individually.
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When updating an existing route entry in atrtr_create(), the old device
reference was not being released before assigning the new device,
leading to a device refcount leak. Fix this by calling dev_put() to
release the old device reference before holding the new one.
In the raid1_reshape function, newpool is
allocated on the stack and assigned to conf->r1bio_pool.
This results in conf->r1bio_pool.wait.head pointing
to a stack address.
Accessing this address later can lead to a kernel panic.
Example access path:
raid1_reshape()
{
// newpool is on the stack
mempool_t newpool, oldpool;
// initialize newpool.wait.head to stack address
mempool_init(&newpool, ...);
conf->r1bio_pool = newpool;
}
raid1_read_request() or raid1_write_request()
{
alloc_r1bio()
{
mempool_alloc()
{
// if pool->alloc fails
remove_element()
{
--pool->curr_nr;
}
}
}
}
mempool_free()
{
if (pool->curr_nr < pool->min_nr) {
// pool->wait.head is a stack address
// wake_up() will try to access this invalid address
// which leads to a kernel panic
return;
wake_up(&pool->wait);
}
}
Fix:
reinit conf->r1bio_pool.wait after assigning newpool.
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 459c51ad6e1f ("zd1211rw: port to mac80211") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Link: https://patch.msgid.link/20250626114619.172631-1-d.dulov@aladdin.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Even the kerneldoc says that with a zero timeout the function should not
wait for anything, but still return 1 to indicate that the fences are
signaled now.
Unfortunately that isn't what was implemented, instead of only returning
1 we also waited for at least one jiffies.
Fix that by adjusting the handling to what the function is actually
documented to do.
v2: improve code readability
Reported-by: Marek Olšák <marek.olsak@amd.com> Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20250129105841.1806-1-christian.koenig@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
As the documentation states, "The exact license information can only be
determined via the license information in the corresponding source files."
and the SPDX identifier has the proper information.
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Revert commit 234f71555019 ("ACPI: battery: negate current when
discharging") breaks not one but several userspace implementations
of battery monitoring: Steam and MangoHud. Perhaps it breaks more,
but those are the two that have been tested.
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Closes: https://lore.kernel.org/linux-acpi/87C1B2AF-D430-4568-B620-14B941A8ABA4@linux.dev/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case.
Fixes: 1b1f42d8fde4 ("drm: move amd_gpu_scheduler into common location") Fixes: 27105db6c63a ("drm/amdgpu: Add SPSC queue to scheduler.") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://lore.kernel.org/r/20250613212013.719312-1-matthew.brost@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this.
CMCI banks are not cleared during shutdown on Intel CPUs. As a side effect,
when a kexec is performed, CPUs coming back online are unable to
rediscover/claim these occupied banks which breaks MCE reporting.
Clear the CPU ownership during shutdown via cmci_clear() so the banks can
be reclaimed and MCE reporting will become functional once more.
Currently, the MCE subsystem sysfs interface will be removed if the
thresholding sysfs interface fails to be created. A common failure is due to
new MCA bank types that are not recognized and don't have a short name set.
The MCA thresholding feature is optional and should not break the common MCE
sysfs interface. Also, new MCA bank types are occasionally introduced, and
updates will be needed to recognize them. But likewise, this should not break
the common sysfs interface.
Keep the MCE sysfs interface regardless of the status of the thresholding
sysfs interface.
The MCA threshold limit must be reset after servicing the interrupt.
Currently, the restart function doesn't have an explicit check for this. It
makes some assumptions based on the current limit and what's in the registers.
These assumptions don't always hold, so the limit won't be reset in some
cases.
Make the reset condition explicit. Either an interrupt/overflow has occurred
or the bank is being initialized.
FineIBT-paranoid was using the retpoline bytes for the paranoid check,
disabling retpolines, because all parts that have IBT also have eIBRS
and thus don't need no stinking retpolines.
Except... ITS needs the retpolines for indirect calls must not be in
the first half of a cacheline :-/
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b f0 lea -0x10(%r11), %r11
e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11
Where the paranoid_thunk looks like:
1d: <ea> (bad)
__x86_indirect_paranoid_thunk_r11:
1e: 75 fd jne 1d
__x86_indirect_its_thunk_r11:
20: 41 ff eb jmp *%r11
23: cc int3
[ dhansen: remove initialization to false ]
[ pawan: move the its_static_thunk() definition to alternative.c. This is
done to avoid a build failure due to circular dependency between
kernel.h(asm-generic/bug.h) and asm/alternative.h which is
needed for WARN_ONCE(). ]
[ Just a portion of the original commit, in order to fix a build issue
in stable kernels due to backports ]
ITS mitigation moves the unsafe indirect branches to a safe thunk. This
could degrade the prediction accuracy as the source address of indirect
branches becomes same for different execution paths.
To improve the predictions, and hence the performance, assign a separate
thunk for each indirect callsite. This is also a defense-in-depth measure
to avoid indirect branches aliasing with each other.
As an example, 5000 dynamic thunks would utilize around 16 bits of the
address space, thereby gaining entropy. For a BTB that uses
32 bits for indexing, dynamic thunks could provide better prediction
accuracy over fixed thunks.
Have ITS thunks be variable sized and use EXECMEM_MODULE_TEXT such that
they are both more flexible (got to extend them later) and live in 2M TLBs,
just like kernel code, avoiding undue TLB pressure.
[ pawan: CONFIG_EXECMEM and CONFIG_EXECMEM_ROX are not supported on
backport kernel, made changes to use module_alloc() and
set_memory_*() for dynamic thunks. ]
Instead of resetting permissions all over the place when freeing module
memory tell the vmalloc code to do so. Avoids the exercise for the next
upcoming user.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220915111143.406703869@infradead.org Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
RETs in the lower half of cacheline may be affected by ITS bug,
specifically when the RSB-underflows. Use ITS-safe return thunk for such
RETs.
RETs that are not patched:
- RET in retpoline sequence does not need to be patched, because the
sequence itself fills an RSB before RET.
- RETs in .init section are not reachable after init.
- RETs that are explicitly marked safe with ANNOTATE_UNRET_SAFE.
095b8303f383 ("x86/alternative: Make custom return thunk unconditional")
made '__x86_return_thunk' a placeholder value. All code setting
X86_FEATURE_RETHUNK also changes the value of 'x86_return_thunk'. So
the optimization at the beginning of apply_returns() is dead code.
Also, before the above-mentioned commit, the optimization actually had a
bug It bypassed __static_call_fixup(), causing some raw returns to
remain unpatched in static call trampolines. Thus the 'Fixes' tag.
Instead of decoding each instruction in the return sites range only to
realize that that return site is a jump to the default return thunk
which is needed - X86_FEATURE_RETHUNK is enabled - lift that check
before the loop and get rid of that loop overhead.
Add comments about what gets patched, while at it.
Due to ITS, indirect branches in the lower half of a cacheline may be
vulnerable to branch target injection attack.
Introduce ITS-safe thunks to patch indirect branches in the lower half of
cacheline with the thunk. Also thunk any eBPF generated indirect branches
in emit_indirect_jump().
Below category of indirect branches are not mitigated:
- Indirect branches in the .init section are not mitigated because they are
discarded after boot.
- Indirect branches that are explicitly marked retpoline-safe.
Note that retpoline also mitigates the indirect branches against ITS. This
is because the retpoline sequence fills an RSB entry before RET, and it
does not suffer from RSB-underflow part of the ITS.
In order to re-write Jcc.d32 instructions text_poke_bp() needs to be
taught about them.
The biggest hurdle is that the whole machinery is currently made for 5
byte instructions and extending this would grow struct text_poke_loc
which is currently a nice 16 bytes and used in an array.
However, since text_poke_loc contains a full copy of the (s32)
displacement, it is possible to map the Jcc.d32 2 byte opcodes to
Jcc.d8 1 byte opcode for the int3 emulation.
This then leaves the replacement bytes; fudge that by only storing the
last 5 bytes and adding the rule that 'length == 6' instruction will
be prefixed with a 0x0f byte.
Change-Id: Ie3f72c6b92f865d287c8940e5a87e59d41cfaa27 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20230123210607.115718513@infradead.org
[cascardo: there is no emit_call_track_retpoline] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the
first half of a cache line get predicted to a target of a branch located in
the second half of the cache line.
Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits.
Newer processors supports a hardware control BHI_DIS_S to mitigate
Branch History Injection (BHI). Setting BHI_DIS_S protects the kernel
from userspace BHI attacks without having to manually overwrite the
branch history.
Define MSR_SPEC_CTRL bit BHI_DIS_S and its enumeration CPUID.BHI_CTRL.
Mitigation is enabled later.
If an AF_RXRPC service socket is opened and bound, but calls are
preallocated, then rxrpc_alloc_incoming_call() will oops because the
rxrpc_backlog struct doesn't get allocated until the first preallocation is
made.
Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no
backlog struct. This will cause the incoming call to be aborted.
Lion's patch [1] revealed an ancient bug in the qdisc API.
Whenever a user creates/modifies a qdisc specifying as a parent another
qdisc, the qdisc API will, during grafting, detect that the user is
not trying to attach to a class and reject. However grafting is
performed after qdisc_create (and thus the qdiscs' init callback) is
executed. In qdiscs that eventually call qdisc_tree_reduce_backlog
during init or change (such as fq, hhf, choke, etc), an issue
arises. For example, executing the following commands:
sudo tc qdisc add dev lo root handle a: htb default 2
sudo tc qdisc add dev lo parent a: handle beef fq
Qdiscs such as fq, hhf, choke, etc unconditionally invoke
qdisc_tree_reduce_backlog() in their control path init() or change() which
then causes a failure to find the child class; however, that does not stop
the unconditional invocation of the assumed child qdisc's qlen_notify with
a null class. All these qdiscs make the assumption that class is non-null.
The solution is ensure that qdisc_leaf() which looks up the parent
class, and is invoked prior to qdisc_create(), should return failure on
not finding the class.
In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the
parentid doesn't correspond to a class, so that we can detect it
earlier on and abort before qdisc_create is called.
This happens if we call ioctl(ATMARP_MKIP) more than once.
During the first call, clip_mkip() sets clip_push() to vcc->push(),
and the second call copies it to clip_vcc->old_push().
Later, when the socket is close()d, vcc_destroy_socket() passes
NULL skb to clip_push(), which calls clip_vcc->old_push(),
triggering the infinite recursion.
Let's prevent the second ioctl(ATMARP_MKIP) by checking
vcc->user_back, which is allocated by the first call as clip_vcc.
Note also that we use lock_sock() to prevent racy calls.
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
