Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3ee70591d6c4 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com> Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR") Cc: stable@vger.kernel.org Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com> Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/ Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T99W709 is designed based on MTK T300(5G redcap) chip. There are
7 serial ports to be enumerated: AP_LOG, GNSS, AP_META, AT,
MD_META, NPT, DBG. RSVD(5) for ADB port.
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250801175423.2970334-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf/core: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should call put_receive_buffer() before waking up the callers.
For the internal error case of response->type being unexpected,
we now also call smbd_disconnect_rdma_connection() instead
of not waking up the callers at all.
Note that the SMBD_TRANSFER_DATA case still has problems,
which will be addressed in the next commit in order to make
it easier to review this one.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When sending a packet with virtio_net_hdr to tun device, if the gso_type
in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr
size, below crash may happen.
To trigger gso segment in udp_queue_rcv_skb(), we should also set option
UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv
hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try
to pull udphdr, but the skb size has been segmented to gso size, which
leads to this crash.
Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
introduces segmentation in UDP receive path only for GRO, which was never
intended to be used for UFO, so drop UFO packets in udp_rcv_segment().
According to the 1588 standard, it is possible to use both unicast and
multicast frames to send the PTP information. It was noticed that if the
frames were unicast they were not processed by the analyzer meaning that
they were not timestamped. Therefore fix this to match also these
unicast frames.
Paolo spotted hangs in NIPA running driver tests against virtio.
The tests hang in virtnet_close() -> virtnet_napi_tx_disable().
The problem is only reproducible if running multiple of our tests
in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is
a simple case of double-disable of NAPI, but instrumenting the
code reveals:
Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64
The NAPI was not in fact disabled, owner is 0 (rather than -1),
so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed
(!list_empty(&n->poll_list) => false). It seems odd that normal NAPI
processing would wedge itself like this.
Better suspicion is that netpoll gets enabled while NAPI is polling,
and also grabs the NAPI instance. This confuses napi_complete_done():
[netpoll] [normal NAPI]
napi_poll()
have = netpoll_poll_lock()
rcu_access_pointer(dev->npinfo)
return NULL # no netpoll
__napi_poll()
->poll(->weight)
poll_napi()
cmpxchg(->poll_owner, -1, cpu)
poll_one_napi()
set_bit(NAPI_STATE_NPSVC, ->state)
napi_complete_done()
if (NAPIF_STATE_NPSVC)
return false
# exit without clearing SCHED
This feels very unlikely, but perhaps virtio has some interactions
with the hypervisor in the NAPI ->poll that makes the race window
larger?
Best I could to to prove the theory was to add and trigger this
warning in napi_poll (just before netpoll_poll_unlock()):
If this warning hits the next virtio_close() will hang.
This patch survived 30 test iterations without a hang (without it
the longest clean run was around 10). Credit for triggering this
goes to Breno's recent netconsole tests.
If the NFS client is doing writeback from a workqueue context, avoid using
__GFP_NORETRY for allocations if the task has set PF_MEMALLOC_NOIO or
PF_MEMALLOC_NOFS. The combination of these flags makes memory allocation
failures much more likely.
We've seen those allocation failures show up when the loopback driver is
doing writeback from a workqueue to a file on NFS, where memory allocation
failure results in errors or corruption within the loopback device's
filesystem.
Extracted from slab.h, which seems to have the most complete version
including the correct might_sleep() check. Roll it out to slob.c.
Motivated by a discussion with Paul about possibly changing call_rcu
behaviour to allocate memory, but only roughly every 500th call.
There are a lot fewer places in the kernel that care about whether
allocating memory is allowed or not (due to deadlocks with reclaim code)
than places that care whether sleeping is allowed. But debugging these
also tends to be a lot harder, so nice descriptive checks could come in
handy. I might have some use eventually for annotations in drivers/gpu.
Note that unlike fs_reclaim_acquire/release gfpflags_allow_blocking does
not consult the PF_MEMALLOC flags. But there is no flag equivalent for
GFP_NOWAIT, hence this check can't go wrong due to
memalloc_no*_save/restore contexts. Willy is working on a patch series
which might change this:
Currently, when the server supports NFS4.1 security labels then
security.selinux label in included twice. Instead, only add it
when the server doesn't possess security label support.
When an applications get killed (SIGTERM/SIGINT) while pNFS client performs a connection
to DS, client ends in an infinite loop of connect-disconnect. This
source of the issue, it that flexfilelayoutdev#nfs4_ff_layout_prepare_ds gets an error
on nfs4_pnfs_ds_connect with status ERESTARTSYS, which is set by rpc_signal_task, but
the error is treated as transient, thus retried.
The issue is reproducible with Ctrl+C the following script(there should be ~1000 files in
a directory, client should must not have any connections to DSes):
```
echo 3 > /proc/sys/vm/drop_caches
for i in *
do
head -1 $i
done
```
The change aims to propagate the nfs4_ff_layout_prepare_ds error state
to the caller that can decide whatever this is a retryable error or not.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Link: https://lore.kernel.org/r/20250627071751.189663-1-tigran.mkrtchyan@desy.de Fixes: 260f32adb88d ("pNFS/flexfiles: Check the result of nfs4_pnfs_ds_connect") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The callers of ff_layout_choose_ds_for_read() should decide whether or
not they want to return the layout on error. Sometimes, we may just want
to retry from the beginning.
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
The buggy address belongs to the object at ffff88812d961f20
which belongs to the cache f2fs_inode_cache of size 1200
The buggy address is located 856 bytes inside of
1200-byte region [ffff88812d961f20, ffff88812d9623d0)
This bug can be reproduced w/ the reproducer [2], once we enable
CONFIG_F2FS_CHECK_FS config, the reproducer will trigger panic as below,
so the direct reason of this bug is the same as the one below patch [3]
fixed.
The root cause is: in the fuzzed image, dnode #8 belongs to inode #7,
after inode #7 eviction, dnode #8 was dropped.
However there is dirent that has ino #8, so, once we unlink file3, in
f2fs_evict_inode(), both f2fs_truncate() and f2fs_update_inode_page()
will fail due to we can not load node #8, result in we missed to call
f2fs_inode_synced() to clear inode dirty status.
Let's fix this by calling f2fs_inode_synced() in error path of
f2fs_evict_inode().
PS: As I verified, the reproducer [2] can trigger this bug in v6.1.129,
but it failed in v6.16-rc4, this is because the testcase will stop due to
other corruption has been detected by f2fs:
F2FS-fs (loop0): inconsistent node block, node_type:2, nid:8, node_footer[nid:8,ino:8,ofs:0,cpver:5013063228981249506,blkaddr:15366]
F2FS-fs (loop0): f2fs_lookup: inode (ino=9) has zero i_nlink
Fixes: 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/x/report.txt?x=13448368580000 Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff888100567dc8 by task kworker/u4:0/8
The buggy address belongs to the object at ffff888100567a10
which belongs to the cache f2fs_inode_cache of size 1360
The buggy address is located 952 bytes inside of
1360-byte region [ffff888100567a10, ffff888100567f60)
The root cause is w/ a fuzzed image, f2fs may missed to clear FI_DIRTY_INODE
flag for target inode, after f2fs_evict_inode(), the inode is still linked in
sbi->inode_list[DIRTY_META] global list, once it triggers checkpoint,
f2fs_sync_inode_meta() may access the released inode.
In f2fs_evict_inode(), let's always call f2fs_inode_synced() to clear
FI_DIRTY_INODE flag and drop inode from global dirty list to avoid this
UAF issue.
Fixes: 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing") Closes: https://syzkaller.appspot.com/bug?extid=849174b2efaf0d8be6ba Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab6048b7 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d22525 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f17 ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c33.
Fixes: 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Daniel Gomez <da.gomez@samsung.com> Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a
comment in the declaration of struct match_workbuf stating it is and a
modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump
WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2
line to ensure that any future changes to the value of WB_HISTORY_SIZE
respect this requirement.
Fixes: 136db994852a ("apparmor: increase left match history buffer size") Signed-off-by: Ryan Lee <ryan.lee@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
flow_dissector_is_valid_access doesn't check that the context access is
aligned. As a consequence, an unaligned access within one of the exposed
field is considered valid and later rejected by
flow_dissector_convert_ctx_access when we try to convert it.
The later rejection is problematic because it's reported as a verifier
bug with a kernel warning and doesn't point to the right instruction in
verifier logs.
As part of the normal initiator side scanning the guest's scsi layer
will loop over all possible targets and send an inquiry. Since the
max number of targets for virtio-scsi is 256, this can result in 255
error messages about targets not existing if you only have a single
target. When there's more than 1 vhost-scsi device each with a single
target, then you get N * 255 log messages.
It looks like the log message was added by accident in:
commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from
control queue handler")
when we added common helpers. Then in:
commit 09d7583294aa ("vhost/scsi: Use common handling code in request
queue handler")
we converted the scsi command processing path to use the new
helpers so we started to see the extra log messages during scanning.
The patches were just making some code common but added the vq_err
call and I'm guessing the patch author forgot to enable the vq_err
call (vq_err is implemented by pr_debug which defaults to off). So
this patch removes the call since it's expected to hit this path
during device discovery.
Fixes: 09d7583294aa ("vhost/scsi: Use common handling code in request queue handler") Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250611210113.10912-1-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In dbAllocCtl(), read_metapage() increases the reference count of the
metapage. However, when dp->tree.budmin < 0, the function returns -EIO
without calling release_metapage() to decrease the reference count,
leading to a memory leak.
Add release_metapage(mp) before the error return to properly manage
the metapage reference count and prevent the leak.
Fixes: a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d ("jfs: fix shift-out-of-bounds in dbSplit") Signed-off-by: Zheng Yu <zheng.yu@northwestern.edu> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/sh/Makefile defines and exports ld-bfd to be used by
arch/sh/boot/compressed/Makefile and arch/sh/boot/romimage/Makefile.
However some shells, including dash, will not pass through environment
variables whose name includes a hyphen. Usually GNU make does not use
a shell to recurse, but if e.g. $(srctree) contains '~' it will use a
shell here.
Other instances of this problem were previously fixed by commits 2bfbe7881ee0 "kbuild: Do not use hyphen in exported variable name"
and 82977af93a0d "sh: rename suffix-y to suffix_y".
Rename the variable to ld_bfd.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0 Fixes: 7b022d07a0fd ("sh: Tidy up the ldscript output format specifier.") Signed-off-by: Ben Hutchings <benh@debian.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The do_k_string() and do_c_string() functions do essentially the same
thing which is they add a string and a comma onto the end of an existing
string. At the end, the caller will overwrite the last comma with a
newline. Later, in orangefs_kernel_debug_init(), we add a newline to
the string.
The change to do_k_string() is just cosmetic. I moved the "- 1" to
the other side of the comparison and made it "+ 1". This has no
effect on runtime, I just wanted the functions to match each other
and the rest of the file.
However in do_c_string(), I removed the "- 2" which allows us to print
two extra characters. I noticed this issue while reviewing the code
and I doubt affects anything in real life. My guess is that this was
double counting the comma and the newline. The "+ 1" accounts for
the newline, and the caller will delete the final comma which ensures
there is enough space for the newline.
Removing the "- 2" lets us print 2 more characters, but mainly it makes
the code more consistent and understandable for reviewers.
Fixes: 44f4641073f1 ("orangefs: clean up debugfs globals") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bus->params should be restored if the stream is failed to prepare.
The issue exists since beginning. The Fixes tag just indicates the
first commit that the commit can be applied to.
The "rec->len" value comes from the firmware. We generally do
trust firmware, but it's always better to double check. If
the length value is too large it would lead to memory corruption
when we set "data[i] = ret;"
Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X.
Fixes: 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information") Signed-off-by: Mengbiao Xiong <xisme1998@gmail.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2e5 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize
the pinctrl_map array, the function returns -ENOMEM directly
without freeing the previously allocated *map buffer. This results
in a memory leak of the original kmalloc_array allocation.
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs") Signed-off-by: Charles Han <hanchunchao@inspur.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated.
Fixes: c6ed4d734bc7 ("clk: davinci: New driver for davinci PSC clocks") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://lore.kernel.org/r/20250401131341.26800-1-bsdhenrymartin@gmail.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The expression '1 << EraseUnitSize' is evaluated in int, which causes
a negative result when shifting by 31 - the upper bound of the valid
range [10, 31], enforced by scan_header(). This leads to incorrect
extension when storing the result in 'erase->len' (uint64_t), producing
a large unexpected value.
Found by Linux Verification Center (linuxtesting.org) with Svace.
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Assign netdev.dev_port based on the device channel index, to indicate the
port number of the network device.
While this driver already uses netdev.dev_id for that purpose, dev_port is
more appropriate. However, retain dev_id to avoid potential regressions.
Fixes: 3e66d0138c05 ("can: populate netdev::dev_id for udev discrimination") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123452.41-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With 802.11 encapsulation offloading, ieee80211_tx_h_select_key() is
called on 802.3 frames. In that case do not try to use skb data as
valid 802.11 headers.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: 788838ebe8a4 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://patch.msgid.link/20250709111339.25360-2-fourier.thomas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for
phystats") increased the skb size when aggregation is enabled but decreased
it for the aggregation disabled case.
As a result, if a frame near the maximum size is received,
rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the
driver starts to malfunction and no further communication is possible.
Restore the skb size in the aggregation disabled case.
Fixes: 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats") Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250709121522.1992366-1-martin.kaistra@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling the kernel with LLVM, the following warning was issued:
drivers/xen/gntdev.c:991: warning: stack frame size (1160) exceeds
limit (1024) in function 'gntdev_ioctl'
The main reason is struct gntdev_copy_batch which is located on the
stack and has a size of nearly 1kb.
For performance reasons it shouldn't by just dynamically allocated
instead, so allocate a new instance when needed and instead of freeing
it put it into a list of free structs anchored in struct gntdev_priv.
Commit 21c167aa0ba9 ("net/sched: act_ctinfo: use percpu stats")
missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set
might be written (and read) locklessly.
Use atomic64_t for these three fields, I doubt act_ctinfo is used
heavily on big SMP hosts anyway.
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
netem_enqueue's duplication prevention logic breaks when a netem
resides in a qdisc tree with other netems - this can lead to a
soft lockup and OOM loop in netem_dequeue, as seen in [1].
Ensure that a duplicating netem cannot exist in a tree with other
netems.
Previous approaches suggested in discussions in chronological order:
1) Track duplication status or ttl in the sk_buff struct. Considered
too specific a use case to extend such a struct, though this would
be a resilient fix and address other previous and potential future
DOS bugs like the one described in loopy fun [2].
2) Restrict netem_enqueue recursion depth like in act_mirred with a
per cpu variable. However, netem_dequeue can call enqueue on its
child, and the depth restriction could be bypassed if the child is a
netem.
3) Use the same approach as in 2, but add metadata in netem_skb_cb
to handle the netem_dequeue case and track a packet's involvement
in duplication. This is an overly complex approach, and Jamal
notes that the skb cb can be overwritten to circumvent this
safeguard.
4) Prevent the addition of a netem to a qdisc tree if its ancestral
path contains a netem. However, filters and actions can cause a
packet to change paths when re-enqueued to the root from netem
duplication, leading us to the current solution: prevent a
duplicating netem from inhabiting the same tree as other netems.
It's needed to check the return value of lockdep_commit_lock_is_held(),
otherwise there's no point in this assertion as it doesn't print any
debug information on itself.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: b04df3da1b5c ("netfilter: nf_tables: do not defer rule destruction via call_rcu") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to
generate console output. That will continue to work even after
debug_cons_nputs() becomes unavailable so there's no need to
unregister the boot console.
Take the opportunity to remove a repeated MACH_IS_* test. Use the
actual .write method (instead of a wrapper) and test that pointer
instead. This means adding an unused parameter to debug_cons_nputs() for
consistency with the struct console API.
early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late,
head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol
depend on the latter, to obviate some ifdef conditionals.
Cc: Daniel Palmer <daniel@0x0f.com> Fixes: 077b33b9e283 ("m68k: mvme147: Reinstate early console") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/d1d4328e5aa9a87bd8352529ce62b767731c0530.1743467205.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the new coming segment covers more than one skbs in the ofo queue,
and which seq is equal to rcv_nxt, then the sequence range
that is duplicated will be sent as DUP SACK, the detail as below,
in step6, the {501,2001} range is clearly including too much
DUP SACK range, in violation of RFC 2883 rules.
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit().
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Fixes: 5118935b1bc2 ("ath11k: dump SRNG stats during FW assert") Link: https://patch.msgid.link/20250612084551.702803-1-senozhatsky@chromium.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
