Jeff King [Thu, 1 Jun 2023 18:10:40 +0000 (14:10 -0400)]
ci: drop linux-clang job
Since the linux-asan-ubsan job runs using clang under Linux, there is
not much point in running a separate clang job. Any errors that a normal
clang compile-and-test cycle would find are likely to be a subset of
what the sanitizer job will find. Since this job takes ~14 minutes to
run in CI, this shaves off some of our CPU load (though it does not
affect end-to-end runtime, since it's typically run in parallel and is
not the longest job).
Technically this provides us with slightly less signal for a given run,
since you won't immediately know if a failure in the sanitizer job is
from using clang or from the sanitizers themselves. But it's generally
obvious from the logs, and anyway your next step would be to fix the
probvlem and re-run CI, since we expect all of these jobs to pass
normally.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 1 Jun 2023 18:09:47 +0000 (14:09 -0400)]
ci: run ASan/UBSan in a single job
When we started running sanitizers in CI via 1c0962c0c4 (ci: add address
and undefined sanitizer tasks, 2022-10-20), we ran them as two separate
CI jobs, since as that commit notes, the combination "seems to take
forever".
And indeed, it does with gcc. However, since the previous commit
switched to using clang, the situation is different, and we can save
some CPU by using a single job for both. Comparing before/after CI runs,
this saved about 14 minutes (the single combined job took 54m, versus
44m plus 24m for ASan and UBSan jobs, respectively). That's wall-clock
and not CPU, but since our jobs are mostly CPU-bound, the two should be
closely proportional.
This does increase the end-to-end time of a CI run, though, since before
this patch the two jobs could run in parallel, and the sanitizer job is
our longest single job. It also means that we won't get a separate
result for "this passed with UBSan but not with ASan" or vice versa).
But as 1c0962c0c4 noted, that is not a very useful signal in practice.
Below are some more detailed timings of gcc vs clang that I measured by
running the test suite on my local workstation. Each measurement counts
only the time to run the test suite with each compiler (not the compile
time itself). We'll focus on the wall-clock times for simplicity, though
the CPU times follow roughly similar trends.
Here's a run with CC=gcc as a baseline:
real 1m12.931s
user 9m30.566s
sys 8m9.538s
Running with SANITIZE=address increases the time by a factor of ~4.7x:
real 5m40.352s
user 49m37.044s
sys 36m42.950s
Running with SANITIZE=undefined increases the time by a factor of ~1.7x:
real 2m5.956s
user 12m42.847s
sys 19m27.067s
So let's call that 6.4 time units to run them separately (where a unit
is the time it takes to run the test suite with no sanitizers). As a
simplistic model, we might imagine that running them together would take
5.4 units (we save 1 unit because we are no longer running the test
suite twice, but just paying the sanitizer overhead on top of a single
run).
But that's not what happens. Running with SANITIZE=address,undefined
results in a factor of 9.3x:
real 11m9.817s
user 77m31.284s
sys 96m40.454s
So not only did we not get faster when doing them together, we actually
spent 1.5x as much CPU as doing them separately! And while those
wall-clock numbers might not look too terrible, keep in mind that this
is on an unloaded 8-core machine. In the CI environment, wall-clock
times will be much closer to CPU times. So not only are we wasting CPU,
but we risk hitting timeouts.
Now let's try the same thing with clang. Here's our no-sanitizer
baseline run, which is almost identical to the gcc one (which is quite
convenient, because we can keep using the same "time units" to get an
apples-to-apples comparison):
real 1m11.844s
user 9m28.313s
sys 8m8.240s
And now again with SANITIZE=address, we get a 5x factor (so slightly
worse than gcc's 4.7x, though I wouldn't read too much into it; there is
a fair bit of run-to-run noise):
real 6m7.662s
user 49m24.330s
sys 44m13.846s
And with SANITIZE=undefined, we are at 1.5x, slightly outperforming gcc
(though again, that's probably mostly noise):
real 1m50.028s
user 11m0.973s
sys 16m42.731s
So running them separately, our total cost is 6.5x. But if we combine
them in a single run (SANITIZE=address,undefined), we get:
real 6m51.804s
user 52m32.049s
sys 51m46.711s
which is a factor of 5.7x. That's along the lines we'd hoped for!
Running them together saves us almost a whole time unit. And that's not
counting any time spent outside the test suite itself (starting the job,
setting up the environment, compiling) that we're no longer duplicating
by having two jobs.
So clang behaves like we'd hope: the overhead to run the sanitizers is
additive as you add more sanitizers. Whereas gcc's numbers seem very
close to multiplicative, almost as if the sanitizers were enforcing
their overheads on each other (though that is purely a guess on what is
going on; ultimately what matters to us is the amount of time it takes).
And that roughly matches the CI improvement I saw. A "time unit" there
is more like 12 minutes, and the observed time savings was 14 minutes
(with the extra presumably coming from avoiding duplicated setup, etc).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 1 Jun 2023 18:03:51 +0000 (14:03 -0400)]
ci: use clang for ASan/UBSan checks
Both gcc and clang support the "address" and "undefined" sanitizers.
However, they may produce different results. We've seen at least two
real world cases where gcc missed a UBSan problem but clang found it:
1. Clang's UBSan (using clang 14.0.6) found a string index that was
subtracted to "-1", causing an out-of-bounds read (curiously this
didn't trigger ASan, but that may be because the string was in the
argv memory, not stack or heap). Using gcc (version 12.2.0) didn't
find the same problem.
Original thread:
https://lore.kernel.org/git/20230519005447.GA2955320@coredump.intra.peff.net/
2. Clang's UBSan (using clang 4.0.1) complained about pointer
arithmetic with NULL, but gcc at the time did not. This was in
2017, and modern gcc does seem to find the issue, though.
Original thread:
https://lore.kernel.org/git/32a8b949-638a-1784-7fba-948ae32206fc@web.de/
Since we don't otherwise have a particular preference for one compiler
over the other for this test, let's switch to the one that we think may
be more thorough.
Note that it's entirely possible that the two are simply _different_,
and we are trading off problems that gcc would find that clang wouldn't.
However, my subjective and anecdotal experience has been that clang's
sanitizer support is a bit more mature (e.g., I recall other oddities
around leak-checking where clang performed more sensibly).
Obviously running both and cross-checking the results would give us the
best coverage, but that's very expensive to run (and these are already
some of our most expensive CI jobs). So let's use clang as our best
guess, and we can re-evaluate if we get more data points.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.39: (34 commits)
Git 2.39.3
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Makefile: force -O0 when compiling with SANITIZE=leak
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
range-diff: use ssize_t for parsed "len" in read_patches()
...
* maint-2.38: (32 commits)
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
...
* maint-2.37: (31 commits)
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
...
* maint-2.36: (30 commits)
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
...
* maint-2.35: (29 commits)
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
...
* maint-2.34: (28 commits)
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
...
* maint-2.33: (27 commits)
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
...
* maint-2.32: (26 commits)
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
...
* maint-2.31: (25 commits)
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
...
* maint-2.30: (23 commits)
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
github-actions: run gcc-8 on ubuntu-20.04 image
...
Avoids issues with renaming or deleting sections with long lines, where
configuration values may be interpreted as sections, leading to
configuration injection. Addresses CVE-2023-29007.
* tb/config-copy-or-rename-in-file-injection:
config.c: disallow overly-long lines in `copy_or_rename_section_in_file()`
config.c: avoid integer truncation in `copy_or_rename_section_in_file()`
config: avoid fixed-sized buffer when renaming/deleting a section
t1300: demonstrate failure when renaming sections with long lines
Taylor Blau [Wed, 12 Apr 2023 23:18:28 +0000 (19:18 -0400)]
config.c: disallow overly-long lines in `copy_or_rename_section_in_file()`
As a defense-in-depth measure to guard against any potentially-unknown
buffer overflows in `copy_or_rename_section_in_file()`, refuse to work
with overly-long lines in a gitconfig.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Taylor Blau [Thu, 6 Apr 2023 18:28:53 +0000 (14:28 -0400)]
config.c: avoid integer truncation in `copy_or_rename_section_in_file()`
There are a couple of spots within `copy_or_rename_section_in_file()`
that incorrectly use an `int` to track an offset within a string, which
may truncate or wrap around to a negative value.
Historically it was impossible to have a line longer than 1024 bytes
anyway, since we used fgets() with a fixed-size buffer of exactly that
length. But the recent change to use a strbuf permits us to read lines
of arbitrary length, so it's possible for a malicious input to cause us
to overflow past INT_MAX and do an out-of-bounds array read.
Practically speaking, however, this should never happen, since it
requires 2GB section names or values, which are unrealistic in
non-malicious circumstances.
Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com>
Taylor Blau [Thu, 6 Apr 2023 18:07:58 +0000 (14:07 -0400)]
config: avoid fixed-sized buffer when renaming/deleting a section
When renaming (or deleting) a section of configuration, Git uses the
function `git_config_copy_or_rename_section_in_file()` to rewrite the
configuration file after applying the rename or deletion to the given
section.
To do this, Git repeatedly calls `fgets()` to read the existing
configuration data into a fixed size buffer.
When the configuration value under `old_name` exceeds the size of the
buffer, we will call `fgets()` an additional time even if there is no
newline in the configuration file, since our read length is capped at
`sizeof(buf)`.
If the first character of the buffer (after zero or more characters
satisfying `isspace()`) is a '[', Git will incorrectly treat it as
beginning a new section when the original section is being removed. In
other words, a configuration value satisfying this criteria can
incorrectly be considered as a new secftion instead of a variable in the
original section.
Avoid this issue by using a variable-width buffer in the form of a
strbuf rather than a fixed-with region on the stack. A couple of small
points worth noting:
- Using a strbuf will cause us to allocate arbitrary sizes to match
the length of each line. In practice, we don't expect any
reasonable configuration files to have lines that long, and a
bandaid will be introduced in a later patch to ensure that this is
the case.
- We are using strbuf_getwholeline() here instead of strbuf_getline()
in order to match `fgets()`'s behavior of leaving the trailing LF
character on the buffer (as well as a trailing NUL).
This could be changed later, but using strbuf_getwholeline() changes
the least about this function's implementation, so it is picked as
the safest path.
- It is temping to want to replace the loop to skip over characters
matching isspace() at the beginning of the buffer with a convenience
function like `strbuf_ltrim()`. But this is the wrong approach for a
couple of reasons:
First, it involves a potentially large and expensive `memmove()`
which we would like to avoid. Second, and more importantly, we also
*do* want to preserve those spaces to avoid changing the output of
other sections.
In all, this patch is a minimal replacement of the fixed-width buffer in
`git_config_copy_or_rename_section_in_file()` to instead use a `struct
strbuf`.
Reported-by: André Baptista <andre@ethiack.com> Reported-by: Vítor Pinho <vitor@ethiack.com> Helped-by: Patrick Steinhardt <ps@pks.im> Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Taylor Blau <me@ttaylorr.com>
gettext: avoid using gettext if the locale dir is not present
In cc5e1bf99247 (gettext: avoid initialization if the locale dir is not
present, 2018-04-21) Git was taught to avoid a costly gettext start-up
when there are not even any localized messages to work with.
But we still called `gettext()` and `ngettext()` functions.
Which caused a problem in Git for Windows when the libgettext that is
consumed from the MSYS2 project stopped using a runtime prefix in
https://github.com/msys2/MINGW-packages/pull/10461
Due to that change, we now use an unintialized gettext machinery that
might get auto-initialized _using an unintended locale directory_:
`C:\mingw64\share\locale`.
Let's record the fact when the gettext initialization was skipped, and
skip calling the gettext functions accordingly.
This addresses CVE-2023-25815.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Taylor Blau [Thu, 6 Apr 2023 15:42:03 +0000 (11:42 -0400)]
t1300: demonstrate failure when renaming sections with long lines
When renaming a configuration section which has an entry whose length
exceeds the size of our buffer in config.c's implementation of
`git_config_copy_or_rename_section_in_file()`, Git will incorrectly
form a new configuration section with part of the data in the section
being removed.
In this instance, our first configuration file looks something like:
[b]
c = d <spaces> [a] e = f
[a]
g = h
Here, we have two configuration values, "b.c", and "a.g". The value "[a]
e = f" belongs to the configuration value "b.c", and does not form its
own section.
However, when renaming the section 'a' to 'xyz', Git will write back
"[xyz]\ne = f", but "[xyz]" is still attached to the value of "b.c",
which is why "e = f" on its own line becomes a new entry called "b.e".
A slightly different example embeds the section being renamed within
another section.
Demonstrate this failure in a test in t1300, which we will fix in the
following commit.
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Taylor Blau <me@ttaylorr.com>
apply --reject: overwrite existing `.rej` symlink if it exists
The `git apply --reject` is expected to write out `.rej` files in case
one or more hunks fail to apply cleanly. Historically, the command
overwrites any existing `.rej` files. The idea being that
apply/reject/edit cycles are relatively common, and the generated `.rej`
files are not considered precious.
But the command does not overwrite existing `.rej` symbolic links, and
instead follows them. This is unsafe because the same patch could
potentially create such a symbolic link and point at arbitrary paths
outside the current worktree, and `git apply` would write the contents
of the `.rej` file into that location.
Therefore, let's make sure that any existing `.rej` file or symbolic
link is removed before writing it.
Reported-by: RyotaK <ryotak.mail@gmail.com> Helped-by: Taylor Blau <me@ttaylorr.com> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `maint-2.30` branch accumulated quite a few fixes over the past two
years. Most of those fixes were originally based on newer versions, and
while the patches cherry-picked cleanly, we weren't diligent enough to
pay attention to the CI builds and the GETTEXT_POISON job regressed.
This topic branch fixes that.
Derrick Stolee [Tue, 23 Aug 2022 17:28:11 +0000 (17:28 +0000)]
ci: update 'static-analysis' to Ubuntu 22.04
GitHub Actions scheduled a brownout of Ubuntu 18.04, which canceled all
runs of the 'static-analysis' job in our CI runs. Update to 22.04 to
avoid this as the brownout later turns into a complete deprecation.
The use of 18.04 was set in d051ed77ee6 (.github/workflows/main.yml: run
static-analysis on bionic, 2021-02-08) due to the lack of Coccinelle
being available on 20.04 (which continues today).
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Oct 2022 20:15:33 +0000 (16:15 -0400)]
Makefile: force -O0 when compiling with SANITIZE=leak
Cherry pick commit d3775de0 (Makefile: force -O0 when compiling with
SANITIZE=leak, 2022-10-18), as otherwise the leak checker at GitHub
Actions CI seems to fail with a false positive.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Junio C Hamano [Mon, 30 Aug 2021 23:06:05 +0000 (16:06 -0700)]
Merge branch 'backport/jk/range-diff-fixes'
"git range-diff" code clean-up. Needed to pacify modern GCC versions.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
Junio C Hamano [Fri, 20 Jan 2023 23:36:21 +0000 (15:36 -0800)]
Merge branch 'backport/jk/curl-avoid-deprecated-api' into maint-2.30
Deal with a few deprecation warning from cURL library.
* jk/curl-avoid-deprecated-api:
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Junio C Hamano [Sat, 10 Dec 2022 07:17:47 +0000 (16:17 +0900)]
Merge branch 'backport/jx/ci-ubuntu-fix' into maint-2.30
Adjust the GitHub CI to newer ubuntu release.
* jx/ci-ubuntu-fix:
github-actions: run gcc-8 on ubuntu-20.04 image
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
Junio C Hamano [Thu, 2 Mar 2023 16:44:16 +0000 (08:44 -0800)]
http.c: clear the 'finished' member once we are done with it
In http.c, the run_active_slot() function allows the given "slot" to
make progress by calling step_active_slots() in a loop repeatedly,
and the loop is not left until the request held in the slot
completes.
Ages ago, we used to use the slot->in_use member to get out of the
loop, which misbehaved when the request in "slot" completes (at
which time, the result of the request is copied away from the slot,
and the in_use member is cleared, making the slot ready to be
reused), and the "slot" gets reused to service a different request
(at which time, the "slot" becomes in_use again, even though it is
for a different request). The loop terminating condition mistakenly
thought that the original request has yet to be completed.
Today's code, after baa7b67d (HTTP slot reuse fixes, 2006-03-10)
fixed this issue, uses a separate "slot->finished" member that is
set in run_active_slot() to point to an on-stack variable, and the
code that completes the request in finish_active_slot() clears the
on-stack variable via the pointer to signal that the particular
request held by the slot has completed. It also clears the in_use
member (as before that fix), so that the slot itself can safely be
reused for an unrelated request.
One thing that is not quite clean in this arrangement is that,
unless the slot gets reused, at which point the finished member is
reset to NULL, the member keeps the value of &finished, which
becomes a dangling pointer into the stack when run_active_slot()
returns. Clear the finished member before the control leaves the
function, which has a side effect of unconfusing compilers like
recent GCC 12 that is over-eager to warn against such an assignment.
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
Technically, the pointer difference `end - start` _could_ be negative,
and when cast to an (unsigned) `size_t` that would cause problems. In
this instance, the symptom is:
dir.c: In function 'git_url_basename':
dir.c:3087:13: error: 'memchr' specified bound [9223372036854775808, 0]
exceeds maximum object size 9223372036854775807
[-Werror=stringop-overread]
CC ewah/bitmap.o
3087 | if (memchr(start, '/', end - start) == NULL
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While it is a bit far-fetched to think that `end` (which is defined as
`repo + strlen(repo)`) and `start` (which starts at `repo` and never
steps beyond the NUL terminator) could result in such a negative
difference, GCC has no way of knowing that.
See also https://gcc.gnu.org/bugzilla//show_bug.cgi?id=85783.
Let's just add a safety check, primarily for GCC's benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fade728df122 (apply: fix writing behind newly created symbolic links,
2023-02-02), we backported a patch onto v2.30.* that was originally
based on a much newer version. The v2.30.* release train still has the
GETTEXT_POISON CI job, though, and hence needs `test_i18n*` in its
tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In bffc762f87ae (dir-iterator: prevent top-level symlinks without
FOLLOW_SYMLINKS, 2023-01-24), we backported a patch onto v2.30.* that
was originally based on a much newer version. The v2.30.* release train
still has the GETTEXT_POISON CI job, though, and hence needs
`test_i18n*` in its tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In cf8f6ce02a13 (clone: delay picking a transport until after
get_repo_path(), 2023-01-24), we backported a patch onto v2.30.* that
was originally based on a much newer version. The v2.30.* release train
still has the GETTEXT_POISON CI job, though, and hence needs
`test_i18n*` in its tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Mon, 9 Aug 2021 22:48:48 +0000 (18:48 -0400)]
range-diff: use ssize_t for parsed "len" in read_patches()
As we iterate through the buffer containing git-log output, parsing
lines, we use an "int" to store the size of an individual line. This
should be a size_t, as we have no guarantee that there is not a
malicious 2GB+ commit-message line in the output.
Overflowing this integer probably doesn't do anything _too_ terrible. We
are not using the value to size a buffer, so the worst case is probably
an out-of-bounds read from before the array. But it's easy enough to
fix.
Note that we have to use ssize_t here, since we also store the length
result from parse_git_diff_header(), which may return a negative value
for error. That function actually returns an int itself, which has a
similar overflow problem, but I'll leave that for another day. Much
of the apply.c code uses ints and should be converted as a whole; in the
meantime, a negative return from parse_git_diff_header() will be
interpreted as an error, and we'll bail (so we can't handle such a case,
but given that it's likely to be malicious anyway, the important thing
is we don't have any memory errors).
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 3c50032ff528 (attr: ignore overly large gitattributes files,
2022-12-01), we backported a patch onto v2.30.* that was originally
based on a much newer version. The v2.30.* release train still has the
GETTEXT_POISON CI job, though, and hence needs `test_i18n*` in its
tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Mon, 9 Aug 2021 22:48:39 +0000 (18:48 -0400)]
range-diff: handle unterminated lines in read_patches()
When parsing our buffer of output from git-log, we have a
find_end_of_line() helper that finds the next newline, and gives us the
number of bytes to move past it, or the size of the whole remaining
buffer if there is no newline.
But trying to handle both those cases leads to some oddities:
- we try to overwrite the newline with NUL in the caller, by writing
over line[len-1]. This is at best redundant, since the helper will
already have done so if it saw a newline. But if it didn't see a
newline, it's actively wrong; we'll overwrite the byte at the end of
the (unterminated) line.
We could solve this just dropping the extra NUL assignment in the
caller and just letting the helper do the right thing. But...
- if we see a "diff --git" line, we'll restore the newline on top of
the NUL byte, so we can pass the string to parse_git_diff_header().
But if there was no newline in the first place, we can't do this.
There's no place to put it (the current code writes a newline
over whatever byte we obliterated earlier). The best we can do is
feed the complete remainder of the buffer to the function (which is,
in fact, a string, by virtue of being a strbuf).
To solve this, the caller needs to know whether we actually found a
newline or not. We could modify find_end_of_line() to return that
information, but we can further observe that it has only one caller.
So let's just inline it in that caller.
Nobody seems to have noticed this case, probably because git-log would
never produce input that doesn't end with a newline. Arguably we could
just return an error as soon as we see that the output does not end in a
newline. But the code to do so actually ends up _longer_, mostly because
of the cleanup we have to do in handling the error.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dfa6b32b5e59 (attr: ignore attribute lines exceeding 2048 bytes,
2022-12-01), we backported a patch onto v2.30.* that was originally
based on a much newer version. The v2.30.* release train still has the
GETTEXT_POISON CI job, though, and hence needs `test_i18n*` in its
tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In e47363e5a8bd (t0033: add tests for safe.directory, 2022-04-13), we
backported a patch onto v2.30.* that was originally based on a much
newer version. The v2.30.* release train still has the GETTEXT_POISON
CI job, though, and hence needs `test_i18n*` in its tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Tue, 17 Jan 2023 03:04:48 +0000 (22:04 -0500)]
http: support CURLOPT_PROTOCOLS_STR
The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was
deprecated in curl 7.85.0, and using it generate compiler warnings as of
curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we
can't just do so unilaterally, as it was only introduced less than a
year ago in 7.85.0.
Until that version becomes ubiquitous, we have to either disable the
deprecation warning or conditionally use the "STR" variant on newer
versions of libcurl. This patch switches to the new variant, which is
nice for two reasons:
- we don't have to worry that silencing curl's deprecation warnings
might cause us to miss other more useful ones
- we'd eventually want to move to the new variant anyway, so this gets
us set up (albeit with some extra ugly boilerplate for the
conditional)
There are a lot of ways to split up the two cases. One way would be to
abstract the storage type (strbuf versus a long), how to append
(strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use,
and so on. But the resulting code looks pretty magical:
GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT;
if (...http is allowed...)
GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP);
and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than
actual code.
On the other end of the spectrum, we could just implement two separate
functions, one that handles a string list and one that handles bits. But
then we end up repeating our list of protocols (http, https, ftp, ftp).
This patch takes the middle ground. The run-time code is always there to
handle both types, and we just choose which one to feed to curl.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jiang Xin [Fri, 25 Nov 2022 09:59:54 +0000 (17:59 +0800)]
ci: install python on ubuntu
Python is missing from the default ubuntu-22.04 runner image, which
prevents git-p4 from working. To install python on ubuntu, we need
to provide the correct package names:
* On Ubuntu 18.04 (bionic), "/usr/bin/python2" is provided by the
"python" package, and "/usr/bin/python3" is provided by the "python3"
package.
* On Ubuntu 20.04 (focal) and above, "/usr/bin/python2" is provided by
the "python2" package which has a different name from bionic, and
"/usr/bin/python3" is provided by "python3".
Since the "ubuntu-latest" runner image has a higher version, its
safe to use "python2" or "python3" package name.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 9 Aug 2021 22:47:42 +0000 (18:47 -0400)]
range-diff: drop useless "offset" variable from read_patches()
The "offset" variable was was introduced in 44b67cb62b (range-diff:
split lines manually, 2019-07-11), but it has never done anything
useful. We use it to count up the number of bytes we've consumed, but we
never look at the result. It was probably copied accidentally from an
almost-identical loop in apply.c:find_header() (and the point of that
commit was to make use of the parse_git_diff_header() function which
underlies both).
Because the variable was set but not used, most compilers didn't seem to
notice, but the upcoming clang-14 does complain about it, via its
-Wunused-but-set-variable warning.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 17 Jan 2023 03:04:44 +0000 (22:04 -0500)]
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Tue, 17 Jan 2023 03:04:38 +0000 (22:04 -0500)]
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
The two options do exactly the same thing, but the latter has been
deprecated and in recent versions of curl may produce a compiler
warning. Since the UPLOAD form is available everywhere (it was
introduced in the year 2000 by curl 7.1), we can just switch to it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
compat/nedmalloc/nedmalloc.c: In function 'DestroyCaches':
compat/nedmalloc/nedmalloc.c:326:12: error: the comparison will always
evaluate as 'true' for the address of 'caches'
will never be NULL [-Werror=address]
326 | if(p->caches)
| ^
compat/nedmalloc/nedmalloc.c:196:22: note: 'caches' declared here
196 | threadcache *caches[THREADCACHEMAXCACHES];
| ^~~~~~
... and it is correct, of course.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:53 +0000 (17:59 +0800)]
ci: use the same version of p4 on both Linux and macOS
There would be a segmentation fault when running p4 v16.2 on ubuntu
22.04 which is the latest version of ubuntu runner image for github
actions.
By checking each version from [1], p4d version 21.1 and above can work
properly on ubuntu 22.04. But version 22.x will break some p4 test
cases. So p4 version 21.x is exactly the version we can use.
With this update, the versions of p4 for Linux and macOS happen to be
the same. So we can add the version number directly into the "P4WHENCE"
variable, and reuse it in p4 installation for macOS.
By removing the "LINUX_P4_VERSION" variable from "ci/lib.sh", the
comment left above has nothing to do with p4, but still applies to
git-lfs. Since we have a fixed version of git-lfs installed on Linux,
we may have a different version on macOS.
[1]: https://cdist2.perforce.com/perforce/
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:52 +0000 (17:59 +0800)]
ci: remove the pipe after "p4 -V" to catch errors
When installing p4 as a dependency, we used to pipe output of "p4 -V"
and "p4d -V" to validate the installation and output a condensed version
information. But this would hide potential errors of p4 and would stop
with an empty output. E.g.: p4d version 16.2 running on ubuntu 22.04
causes sigfaults, even before it produces any output.
By removing the pipe after "p4 -V" and "p4d -V", we may get a
verbose output, and stop immediately on errors because we have "set
-e" in "ci/lib.sh". Since we won't look at these trace logs unless
something fails, just including the raw output seems most sensible.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:51 +0000 (17:59 +0800)]
github-actions: run gcc-8 on ubuntu-20.04 image
GitHub starts to upgrade its runner image "ubuntu-latest" from version
"ubuntu-20.04" to version "ubuntu-22.04". It will fail to find and
install "gcc-8" package on the new runner image.
Change the runner image of the `linux-gcc` job from "ubuntu-latest" to
"ubuntu-20.04" in order to install "gcc-8" as a dependency.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows' SDK recently upgraded to GCC v12.x which points out
that the `pos` variable might be used even after the corresponding
memory was `realloc()`ed and therefore potentially no longer valid.
Since a subset of this SDK is used in Git's CI/PR builds, we need to fix
this to continue to be able to benefit from the CI/PR runs.
Note: This bug has been with us since 2a6b149c64f6 (mingw: avoid using
strbuf in syslog, 2011-10-06), and while it looks tempting to replace
the hand-rolled string manipulation with a `strbuf`-based one, that
commit's message explains why we cannot do that: The `syslog()` function
is called as part of the function in `daemon.c` which is set as the
`die()` routine, and since `strbuf_grow()` can call that function if it
runs out of memory, this would cause a nasty infinite loop that we do
not want to re-introduce.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Mar 2023 00:38:47 +0000 (16:38 -0800)]
Merge branch 'jk/http-test-fixes'
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
René Scharfe [Tue, 28 Feb 2023 16:13:27 +0000 (17:13 +0100)]
range-diff: avoid compiler warning when char is unsigned
Since 2b15969f61 (range-diff: let '--abbrev' option takes effect,
2023-02-20), GCC 11.3 on Ubuntu 22.04 on aarch64 warns (and errors
out if the make variable DEVELOPER is set):
range-diff.c: In function ‘output_pair_header’:
range-diff.c:388:20: error: comparison is always false due to limited range of data type [-Werror=type-limits]
388 | if (abbrev < 0)
| ^
cc1: all warnings being treated as errors
That's because char is unsigned on that platform. Use int instead, just
like in struct diff_options, to copy the value faithfully.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gwyneth Morgan [Mon, 27 Feb 2023 20:27:18 +0000 (20:27 +0000)]
signature-format.txt: note SSH and X.509 signature delimiters
This document only explains PGP signatures, but Git now supports X.509
signatures as of 1e7adb9756 (gpg-interface: introduce new signature
format "x509" using gpgsm, 2018-07-17), and SSH signatures as of 29b315778e (ssh signing: add ssh key format and signing code,
2021-09-10).
Additionally, explain that these signature formats are controlled
`gpg.format`, linking to its documentation, and explain in said
`gpg.format` documentation that the underlying signature format is
documented in signature-format.txt.
Signed-off-by: Gwyneth Morgan <gwymor@tilde.club> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 27 Feb 2023 18:08:57 +0000 (10:08 -0800)]
Merge branch 'jc/countermand-format-attach'
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
sscanf(3) used in "git symbolic-ref --short" implementation found
to be not working reliably on macOS in UTF-8 locales. Rewrite the
code to avoid sscanf() altogether to work it around.
Junio C Hamano [Mon, 27 Feb 2023 18:08:57 +0000 (10:08 -0800)]
Merge branch 'rs/archive-mtime'
"git archive HEAD^{tree}" records the paths with the current
timestamp in the archive, making it harder to obtain a stable
output. The command learned the --mtime option to specify an
arbitrary timestamp (e.g. --mtime="@0 +0000" for the epoch).
projects / thirdparty / git.git / log
