KVM: s390: ucontrol: Add missing locking around gmap_remove_child()
gmap_remove_child() needs to be called while holding the children_lock
of the parent gmap. This was not the case in the error handling path of
kvm_arch_vcpu_create() for UCONTROL guests.
Fix by adding the missing lock.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-10-imbrenda@linux.ibm.com>
KVM: s390: cmma: Fix dirty tracking when removing memslot
When a memslot is removed, all ptes that mapped the slot are cleared or
even deallocated. If this happens while the system is in migration
mode, and if cmma-dirty pages are removed, the cmma-dirty counter will
not reflect reality.
Fix by appropriately decrementing the cmma-dirty counter when removing
a memslot.
Opportunistically improve kvm_arch_commit_memory_region() to use
__free() for the struct kvm_s390_mmu_cache.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-9-imbrenda@linux.ibm.com>
When cleaning up a UCONTROL VM, sca_clear_ext_call() will touch memory
outside of the allocated ESCA block, and UCONTROL VMs don't even use
ESCA.
Fix by not touching ESCA for UCONTROL VMs, and fence the
KVM_S390_INTERRUPT ioctl altogether. Add extra checks in
sca_ext_call_pending() and sca_inject_ext_call() to make sure UCONTROL
VMs won't touch ESCA.
Fencing does not cause regressions with userspace, since UCONTROL VMs
never used KVM_S390_INTERRUPT ioctls.
Fixes: 7d43bafcff17 ("KVM: s390: Make provisions for ESCA utilization") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-6-imbrenda@linux.ibm.com>
If an attempt is made to create a vCPU with an already existing ID,
the duplicated vCPU will be destroyed. When destroying a vCPU, its
ESCA entry will be cleared. In the above scenario, the spurious
duplicate vCPU is destroyed, but the ESCA entry corresponding to the
original vCPU is cleared.
Fix by skipping clearing the ESCA entry if the vCPU creation was not
successful, i.e. if the vcpu->arch.initialized is still zero.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Fixes: abf4a71ed95f ("KVM: s390: Unlink vcpu on destroy - v2")
[ Added Fixes tag while picking -- Claudio ]
Message-ID: <20260803124040.126471-5-imbrenda@linux.ibm.com>
In some cases kvm_s390_vcpu_unsetup_cmma() can be called with a 0
cbrlo; in such cases, if running with V != R, free_page() will attempt
to free physical page 0.
Fix by freeing cbrlo only if it's non-zero.
Fixes: b31605c12f4e ("KVM: s390: make cmma usage conditionally") Fixes: 29b40f105ec8 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-4-imbrenda@linux.ibm.com>
KVM: s390: Do not free SCA if it was not allocated
If VM creation fails early in kvm_arch_init_vm(), the cleanup code
tries to free up the SCA, even though the address is 0. Due to using
free_pages_exact(), only the first page is skipped, accidentally
freeing pages 1, 2, and 3.
Fix by checking whether the pointer is NULL before attempting to free
the SCA in sca_dispose().
Fixes: e72753ed1267 ("KVM: s390: Use ESCA instead of BSCA at VM init") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-3-imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
When creating a new vCPU, kvm_vm_ioctl_create_vcpu() will call
kvm_arch_vcpu_postcreate() after the file descriptor for the new vCPU
has been created. The new file descriptor has not been returned yet,
but a malicious userspace program could try to guess it.
If a malicious userspace program manages to start the newly created vCPU
before kvm_arch_vcpu_postcreate() is called, __vcpu_run() will try to
dereference vcpu->arch.gmap and trigger a NULL pointer dereference.
Fix this by adding a new field to struct kvm_vcpu_arch to keep track of
the initialization status of the vCPU. Refuse to run a vCPU that is not
fully initialized.
Fixes: dafd032a15f8 ("KVM: s390: move vcpu specific initalization to a later point") Fixes: e38c884df921 ("KVM: s390: Switch to new gmap") Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-2-imbrenda@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:22 +0000 (05:30 +0200)]
s390/vfio_ccw: Implement a crw lock
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:21 +0000 (05:30 +0200)]
s390/vfio_ccw: Selectively expand io_mutex
The io_mutex was defined to serialize the io_regions, but then has
also sort of been associated with the I/O themselves because of
the close relationship they share.
With the handful of races that are possible, the choices are either to:
A) expand the scope of io_mutex to close these remaining windows, or
B) reduce the scope of io_mutex to just io_region, and introduce a new
lock mechanism for the remaining I/O resources
This patch implements A, since B brings with it a lot more interactions
that would need to be tracked and kept in a correct hierarchy. It also
takes advantage of the workqueue element for cp_free() that now gets
called out of fsm_notoper(), which could be invoked out of an interrupt
context and thus cannot acquire a mutex itself.
Fixes: 4f76617378ee ("vfio-ccw: protect the I/O region") Cc: stable@vger.kernel.org Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:20 +0000 (05:30 +0200)]
s390/vfio_ccw: Move cp cleanup out of not operational
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements.
Fixes: 204b394a23ad ("vfio/ccw: Move FSM open/close to MDEV open/close") Cc: stable@vger.kernel.org Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:19 +0000 (05:30 +0200)]
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com> Fixes: e5f84dbaea59 ("vfio: ccw: return I/O results asynchronously") Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:18 +0000 (05:30 +0200)]
s390/vfio_ccw: Ensure index for read/write regions are within range
The introduction of the capability chain rightly clamped the
region indexes to the range of the capabilities itself, but
neglected to do so for the existing read/write regions which
should also be enforced.
Fixes: db8e5d17ac03 ("vfio-ccw: add capabilities chain") Cc: stable@vger.kernel.org Cc: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:17 +0000 (05:30 +0200)]
s390/vfio_ccw: Calculate idal length based on idaw type
Sashiko pointed out that get_guest_idal() unconditionally calculates
the length of the IDAL presuming everything is a Format-2 IDAW.
The output of vfio-ccw is always Format-2, but the input can be either
Format-1 (31-bit addresses) or Format-2 (64-bit addresses). As a result,
the size of the guest IDAL may be incorrect and should be trimmed down.
Reported-by: sashiko-bot <sashiko-bot@kernel.org> Link: https://lore.kernel.org/r/20260720203400.7328E1F000E9@smtp.kernel.org/ Fixes: 1b676fe3d9d3 ("vfio/ccw: handle a guest Format-1 IDAL") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:16 +0000 (05:30 +0200)]
s390/vfio_ccw: Ensure first IDAW remains constant
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with.
Fixes: 01aa26c672c0 ("s390/cio: Combine direct and indirect CCW paths") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:15 +0000 (05:30 +0200)]
s390/vfio_ccw: Fix out of bounds check on CCW array
The routine ccwchain_calc_length() counts the number of channel
command words (CCWs) that are chained together in a single channel
program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs.
The loop itself is "do..while (count < 257)", and while the logic in
is_cpa_within_range() correctly adjusts between the 0-index array of
CCWs and the count of CCWs starting at 1, this means it would look
at a possible 257th CCW before ending the loop and (correctly)
returning an error.
Fix this by restructuring the loop to break as soon as 256 CCWs
(thus indexes 0-255) are examined, without looking at memory
outside the range.
Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:14 +0000 (05:30 +0200)]
s390/vfio_ccw: Limit the number of channel program segments
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive.
Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Eric Farman [Tue, 28 Jul 2026 03:30:13 +0000 (05:30 +0200)]
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512a2 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init") Cc: stable@vger.kernel.org Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Jaehoon Kim [Fri, 24 Jul 2026 13:39:43 +0000 (08:39 -0500)]
KVM: s390: Fall back to short-term pinning in MAP ioctl
FOLL_LONGTERM pinning fails for some memory types, such as file-backed
guest memory. As a result, kvm_s390_adapter_map() returns -EINVAL and
irqfd adapter registration fails even though interrupt delivery could
still work via the existing non-atomic path.
When FOLL_LONGTERM pinning fails, verify that the page is accessible
using a short-term pin instead. If the short-term pin succeeds, unpin
the page and add a map entry with pinned=false to preserve MAP/UNMAP
symmetry. The non-atomic irqfd path already performs short-term pinning
for interrupt delivery, so this restores the previous behavior for
memory that cannot be pinned long-term.
get_map_info() is updated to return NULL for unpinned entries so that
the atomic irqfd fast path falls back to the non-atomic path.
kvm_s390_adapter_unmap() and kvm_s390_unmap_all_adapters() skip dirty
marking and unpin for unpinned entries.
Update Documentation/virt/kvm/devices/s390_flic.rst to reflect the
new MAP/UNMAP behavior.
Fixes: c9a568838086 ("KVM: s390: Add map/unmap ioctl and clean mappings post-guest") Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com> Reviewed-by: Douglas Freimuth <freimuth@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:09 +0000 (15:14 -0700)]
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:08 +0000 (15:14 -0700)]
KVM: s390: pci: Fix resource leak on IRQ registration failure
Currently if kvm_zpci_set_airq() fails, kvm_s390_pci_aif_enable() returns
the error code but doesn't do any resource cleanup thus leaking resources.
Fix this by cleaning up all the resources such as the GAITE, AIBV, AISB and
unpinning any pinned pages. While at it, remove dead code that stored FIB
values that were never referenced.
As part of the cleanup, we are also holding the aift_lock a bit longer, as
we hold the lock while executing the MPCIFC instruction. Though this is not
strictly necessary, it means we don't have to drop and re-acquire in the
error case.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:07 +0000 (15:14 -0700)]
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:06 +0000 (15:14 -0700)]
KVM: s390: pci: Fix missing error codes and memory unaccounting
In kvm_s390_pci_aif_enable() two error paths failed to set an error code,
causing the function to return 0 on failure. It also failed to rollback
memory accounting on failure. Fix both by propagating an error code on
failure and calling unaccount_mem() in the cleanup path.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:05 +0000 (15:14 -0700)]
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
[borntraeger@linux.ibm.com: Fixed whitespace] Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Farhan Ali [Thu, 23 Jul 2026 22:14:04 +0000 (15:14 -0700)]
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Matthew Rosato [Thu, 9 Jul 2026 13:54:04 +0000 (09:54 -0400)]
KVM: s390: pci: Fix handling of AIF enable without AISB
When a guest seeks to register IRQs without a summary bit specified,
ensure that the associated GAITE then stores 0 for the guest AISB
location instead of virt_to_phys(page_address(NULL)).
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
KVM: s390: Fix dat_crste_walk_range() early return
If a walk entry handler for a lower level returns a value,
dat_crste_walk_range() will not return immediately, but instead loop
again and move to the next entry.
This means that some entries are potentially skipped, and early return
is ignored. Skipped entries might lead to all kinds of issues, given
that the caller expects them to not be skipped. Early return is often
used to interrupt a walk when a rescheduling is needed; if it is
ignored it can lead to stalls.
Fix by breaking from the loop immediately if the walk to a lower level
returned non-zero.
KVM: s390: vsie: Avoid potential deadlock with real spaces
The natural lock ordering is mmu_lock -> children_lock, but in
gmap_create_shadow() the reverse order is used when handling shadowing
of real address spaces.
Convert the inner locking of kvm->mmu_lock to a trylock; return -EAGAIN
if the lock is busy, and let the caller try again.
This path is not expected to happen in real-life scenarios, so its
performance is not important.
Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
kvm_s390_gisc_register() registers the guest ISC before pinning
the guest interrupt forwarding pages and allocating the AISB bit.
If any of the later setup steps fails, the function unwinds the
pinned pages and other local state, but does not unregister the
GISC reference. Add the missing kvm_s390_gisc_unregister() to the
error unwind path.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260624061910.2794734-1-haoxiang_li2024@163.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Merge tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
Merge tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
Merge tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Ingo Molnar:
- Fix a futex-requeue deadlock detection regression (Thomas Gleixner)
* tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
Merge tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
Merge tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
Merge tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix PKEY_VERIFYPROTK ioctl key type handling by removing the generic
key-length based type check with its wrong bit-size calculation, and
leaving protected key verification to the pkey handler
- Fix monwriter buffer reuse by rejecting records that change the data
length, preventing out of bounds user copy into the kernel buffer
* tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/monwriter: Reject buffer reuse with different data length
pkey: Move keytype check from pkey api to handler
Merge tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
Merge tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix several use-after-free races in durable handle reconnect,
supersede, and oplock handling
- Avoid holding the inode oplock lock while waiting for a lease break
acknowledgement. This removes delays of up to 35 seconds when cifs.ko
closes a deferred handle in response to a lease break
- Fix malformed security descriptor handling, including an undersized
DACL allocation issue and an out-of-bounds ACE SID read
- Fix memory leaks in security descriptor and DOS attribute xattr
encoding/decoding error paths
- Fix outstanding SMB2 credit leaks on aborted requests and correct the
QUERY_INFO credit charge calculation
- Fix hard-link creation without replacement being incorrectly rejected
when the handle lacks DELETE access
- Avoid unnecessary zeroing of large SMB2 read buffers
- Add an oplock list lockdep annotation and update the documented
support status for durable handles and SMB3.1.1 compression
- Durable handle fixes to address ownership and lifetime races during
reconnect, session teardown, oplock handling, and superseding opens,
preventing stale session and file references from being used by
concurrent operations
* tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix app-instance durable supersede session UAF
ksmbd: snapshot previous oplock state before durable checks
ksmbd: close superseded durable handles through refcount handoff
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
smb/server: do not require delete access for non-replacing links
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
ksmbd: doc: update feature support status for durable handles and compression
ksmbd: annotate oplock list traversals under m_lock
ksmbd: fix outstanding credit leak on abort and error paths
ksmbd: fix credit charge calculation for SMB2 QUERY_INFO
ksmbd: avoid zeroing the read buffer in smb2_read()
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
ksmbd: reject undersized DACLs before parsing ACEs
ksmbd: fix n.data memory leak in ksmbd_vfs_set_dos_attrib_xattr
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
Merge tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
Merge tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI TAD (Time and Alarm
Device) driver introduced by one of its previous updates and
get rid of the ugly #ifdef __KERNEL__ conditional compilation
in acpi_ut_safe_strncpy() by redefining that function as an
alias for strscpy_pad():
- Add a missing ACPI_TAD_AC_WAKE capability check omitted by mistake
to the ACPI TAD driver (Xu Rao)
- Define acpi_ut_safe_strncpy() as an alias for strscpy_pad()
which is viable because that function is only called from kernel
code (Rafael Wysocki)"
* tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Define acpi_ut_safe_strncpy() as strscpy_pad() alias
ACPI: TAD: Check AC wake capability before enabling wakeup
Merge tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a crash when a kretprobe reads from the stack
- Fix an issue with the build-time mcount sorter that broke ftrace
- Fix the rv32 IRQ stack frame padding to match the ABI
- Only defer IOMMU configuration during initialization. This avoids an
issue where IOMMU configuration could be indefinitely deferred
- Add the missing build salt to the vDSO
- Now that RISC-V systems with higher numbers of cores are starting to
become available, raise NR_CPUS for RISC-V to 256
- Clean up some warnings from sparse caused by the RISC-V-optimized
RAID6 code
- Clean up our __cpu_up() code with a few minor fixes
* tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: probes: save original sp in rethook trampoline
riscv: Fix 32-bit call_on_irq_stack() frame pointer ABI
scripts/sorttable: Handle RISC-V patchable ftrace entries
riscv: smp: use secs_to_jiffies in __cpu_up
ACPI: RIMT: Only defer the IOMMU configuration in init stage
riscv: Add build salt to the vDSO
raid6: fix raid6_recov_rvv symbol undeclared warning
raid6: fix riscv symbol undeclared warnigns
riscv: Raise default NR_CPUS for 64BIT to 256
Merge tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Credit fix
- Fix alignment issue in parse_posix_ctxt
- SID parsing fix
* tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing credit release on failure in cifs_issue_read()
cifs: update internal module version number
smb: client: use unaligned reads in parse_posix_ctxt()
smb: client: harden POSIX SID length parsing
Merge tag 'vfs-7.2-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- netfs:
- fix the decision when to disallow write-streaming with fscache in
use, handling of asynchronous cache object creation, a double fput
in cachefiles, clearing S_KERNEL_FILE without the inode lock held,
page extraction bugs in the iov_iter helpers (a potential
underflow, a missing allocation failure check, a memory leak, and
a folio offset miscalculation), writeback error and ENOMEM
handling, DIO write retry for filesystems without a
->prepare_write() method, and the replacement of the wb_lock mutex
with a bit lock plus writethrough collection offload so that
multiple asynchronous writebacks don't interfere with each other.
- Fix the barriering when walking the netfs subrequest list during
retries as it was possible to see a subrequest that was just added
by the application thread.
- iomap:
- Change iomap to submit read bios after each extent instead of
building them up across extents. The old behavior was considered
problematic for a while and now caused an actual erofs bug.
- Guard the ioend io_size EOF trim in iomap against underflow when a
concurrent truncate moves EOF below the start of the ioend,
wrapping io_size to a huge value.
- overlayfs
- Fix a stale overlayfs comment about the locking order.
- Store the linked-in upper dentry instead of the disconnected
O_TMPFILE dentry during overlayfs tmpfile copy-up. With a FUSE or
virtiofs upper layer ->d_revalidate() would try to look up "/" in
the workdir and fail, causing persistent ESTALE errors that broke
dpkg and apt.
- vfs-bpf:
Have the bpf_real_data_inode() kfunc take a struct file instead of a
dentry so it is usable from the bprm_check_security, mmap_file, and
file_mprotect hooks, and rename it from bpf_real_inode() to make the
data-inode semantics explicit. The kfunc landed this cycle so the
change is safe.
- afs:
NULL pointer dereferences in the callback service and in
afs_get_tree(), several memory and refcount leaks, missing locking
around the dynamic root inode numbers and premature cell exposure
through /afs, a netns destruction hang caused by a misplaced
increment of net->cells_outstanding, a bulk lookup malfunction caused
by the dir_emit() API change, inode (re)initialisation issues, and
assorted smaller fixes to error codes, seqlock handling, and debug
output.
- vfs:
Refuse O_TMPFILE creation with an unmapped fsuid or fsgid and add a
selftest for it.
- vboxsf:
Add Jori Koolstra as vboxsf maintainer, taking over from Hans de
Goede.
- dio:
Release the pages attached to a short atomic dio bio; the REQ_ATOMIC
size check error path leaked them.
- procfs:
Only bump the parent directory link count when registering
directories in procfs. Registering regular files inflated the count
and leaked a link on every create and remove cycle.
- minix:
Avoid an unsigned overflow in the minix bitmap block count
calculation that let crafted images with huge inode or zone counts
pass superblock validation and crash the kernel during mount.
- cachefiles:
Fix a double unlock in the cachefiles nomem_d_alloc error path left
over from the start_creating() conversion.
- fat:
Stop fat from reading directory entries past the 0x00
end-of-directory marker. If the trailing on-disk slots aren't
zero-filled the driver surfaced arbitrary garbage as directory
entries.
- freexvfs:
Don't BUG() on unknown typed-extent types in freevxfs, reachable via
ioctl(FIBMAP) on a crafted image; fail with an I/O error instead.
- orangefs:
Keep the readdir entry size 64-bit in orangefs fill_from_part().
Truncating it to __u32 bypassed the bounds check and led to
out-of-bounds reads triggerable by the userspace client.
- xfs:
Fix the error unwind in xfs_open_devices() which released the rt
device file twice and left dangling buftarg pointers behind that were
freed again when the failed mount was torn down.
- exec:
Fix an off-by-one in the comment documenting the maximum binfmt
rewrite depth in exec_binprm(). The code allows five rewrites, not
four; restricting the code would break userspace so the comment is
fixed instead.
- file handles:
Reject detached mounts in capable_wrt_mount(). A detached mount can
be dissolved concurrently, leaving a NULL mount namespace that
open_by_handle_at() would dereference.
* tag 'vfs-7.2-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (57 commits)
netfs: Fix barriering when walking subrequest list
iomap: submit read bio after each extent
fuse: call fuse_send_readpages explicitly from fuse_readahead
iomap: consolidate bio submission
fhandle: reject detached mounts in capable_wrt_mount()
netfs: Fix DIO write retry for filesystems without a ->prepare_write()
netfs: Fix folio state after ENOMEM whilst under writeback iteration
netfs: Fix writeback error handling
netfs: Fix writethrough to use collection offload
netfs: Replace wb_lock with a bit lock for asynchronicity
netfs: Fix kdoc warning
scatterlist: Fix offset in folio calc in extract_xarray_to_sg()
iov_iter: Remove unused variable in kunit_iov_iter.c
iov_iter: Fix a memory leak in iov_iter_extract_user_pages()
iov_iter: Fix missing alloc fail check in iov_iter_extract_bvec_pages()
iov_iter: Fix potential underflow in iov_iter_extract_xarray_pages()
cachefiles: Fix file burial to take lock when unsetting S_KERNEL_FILE
cachefiles: Fix double fput
netfs: Fix netfs_create_write_req() to handle async cache object creation
netfs: Fix decision whether to disallow write-streaming due to fscache use
...
Merge tag 'xfs-fixes-7.2-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A collection of bugfixes and some small code refactoring"
* tag 'xfs-fixes-7.2-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: simplify __xfs_buf_ioend
xfs: fix handling of synchronous errors in xfs_buf_submit
xfs: remove xfs_buf_ioend
xfs: improve the xfs_buf_ioend_fail calling convention
xfs: use null daddr for unset first bad log block
xfs: fix memory leak in xfs_dqinode_metadir_create()
xfs: release dquot buffer after dqflush failure
xfs: also mark the buffer stale on verifier failure in xfs_buf_submit
xfs: open code xfs_buf_ioend_fail in xfs_buf_submit
xfs: fix AGFL extent count calculation in xrep_agfl_fill
xfs: simplify the failure path in xfs_buf_alloc_vmalloc
xfs: fix incorrect use of gfp flags in xfs_buf_alloc_backing_mem
xfs: lift setting __GFP_NOFAIL from xfs_buf_alloc_kmem to the caller
xfs: split up xfs_buf_alloc_backing_mem
Merge tag 'for-linus-7.2a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- rename function parameters and a comment related to
xen_exchange_memory() (Jan Beulich)
- replace __ASSEMBLY__ with __ASSEMBLER__ (Thomas Huth)
- add some sanity checking to the Xen pvcalls frontend driver (Michael
Bommarito)
- fix error handling in the Xen gntdev driver (Wentao Liang)
- fix several minor bugs in Xen related drivers (Yousef Alhouseen)
* tag 'for-linus-7.2a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: correct commentary and parameter naming of xen_exchange_memory()
xenbus: reject unterminated directory replies
xen/gntalloc: validate grant count before allocation
xen/gntalloc: make grant counters unsigned
xen/front-pgdir-shbuf: free grant reference head on errors
xen/gntdev: fix error handling in ioctl
xen: Replace __ASSEMBLY__ with __ASSEMBLER__ in header files
xen/pvcalls: bound backend response req_id before indexing rsp[]
Merge tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- check the return value of gpiochip_add_data() in gpio-mvebu and
gpio-htc-egpio
- avoid locking context issues with GPIO drivers using the shared GPIO
proxy by only allowing sleeping operations (atomic GPIO ops don't
really make sense in shared context anyway)
- with the above: restore non-sleeping GPIO access in pinctrl-meson
- fix return value on OOM in gpio-timberdale
- fix interrupt handling in gpio-mt7621
- support both A and B variants of NCT6126D in gpio-f7188x
* tag 'gpio-fixes-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
pinctrl: meson: restore non-sleeping GPIO access
gpio: timberdale: Return -ENOMEM on dynamic memory allocation in probe
gpio: mt7621: be sure IRQ domain is created before exposing GPIO chips
gpio: mt7621: more robust management of IRQ domain teardown
gpio: mt7621: avoid corruption of shared interrupt trigger state
gpio: shared-proxy: always serialize with a sleeping mutex
gpio-f7188x: Add support for NCT6126D version B
gpio: htc-egpio: use managed gpiochip registration
gpio: mvebu: fail probe if gpiochip registration fails
David Howells [Thu, 2 Jul 2026 08:23:02 +0000 (09:23 +0100)]
netfs: Fix barriering when walking subrequest list
Fix the barriering used when walking the subrequest list in retry as
there's a possibility of seeing a subreq that's just been added by the
application thread.
Merge tag 'asoc-fix-v7.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.2
A fairly standard set of driver specific fixes and quirks that have come
in since the merge window, plus a MAINTAINERS update. The tas675x
READ_ONCE change is probably not actually fixing issues properly but we
need a whole new approach to concurrency there and it came along with
some good fixes.
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
Currently <linux/compiler.h> isn't included at all (not even
transitively) in <asm/ptrace.h>.
arch/parisc/kernel/asm-offsets.c just happens to include the following
chain of includes before <asm/ptrace.h>:
. That chain will be broken, because in one of the next commits
<asm/hardware.h> is changed to only include <linux/device-id/parisc.h>
instead of <linux/mod_devicetable.h>. So to ensure
arch/parisc/kernel/asm-offsets.c knows about unlikely() even after that
change, #include <linux/compiler.h> explicitly.
media: em28xx: Add include for struct usb_device_id
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct usb_device_id. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
drivers/media/usb/em28xx/em28xx.h via:
To keep struct usb_device_id available once <linux/device/driver.h>
stops including <linux/mod_devicetable.h>, include it the header
providing that struct explictly.
LoongArch: KVM: Add include defining struct cpu_feature
Traditionally <linux/mod_devicetable.h> was a header defining a plethora
of structs, among them struct cpu_features. This was split now with the
objective that only the relevant bits are included.
Currently <linux/mod_devicetable.h> is transitively included in
arch/loongarch/kvm/main.c via:
ALSA: hda/core: Add include defining struct hda_device_id
Traditionally all *_device_id were defined in a single header
<linux/mod_devicetable.h>. This was split now with the objective that
only the relevant bits are included. So including <linux/pci.h> won't be
enough to get a definition of (the unrelated to pci) struct
hda_device_id.
Add an explicit include for the header defining struct hda_device_id to
keep working when <linux/pci.h> stops providing this defintion.
usb: dwc2: Add include defining struct pci_device_id
Up to now <linux/acpi.h> includes <linux/mod_devicetable.h> that
provides struct pci_device_id. However <linux/mod_devicetable.h> was
split into per bus headers and <linux/acpi.h> will only include the acpi
related one (and similar for other bus headers).
As struct pci_device_id is used in drivers/usb/dwc2/core.h, add an
include to ensure it's defined also after the includes in <linux/acpi.h>
are tightened.
However these includes will be tightend such that only the bits relevant
for of will be provided by <linux/of.h>. To ensure that dmi_system_id
stays around, include the respective header explicitly.
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
Currently <linux/i2c.h> includes <linux/mod_devicetable.h> transitively
which ensures that struct dmi_system_id is defined in
drivers/platform/x86/x86-android-tablets/x86-android-tablets.h. However
this include in <linux/i2c.h> will be replaced by one for i2c_device_id
only. To ensure that dmi_system_id is available add the include for that
explicitly.
The subsystem private header i2c-core.h uses several symbols defined in
<linux/i2c.h>, e.g. struct i2c_board_info and i2c_lock_bus()). This
doesn't pose a problem in practise because all files including
"i2c-core.h" also include <linux/i2c.h>.
To make this more robust add an include statement for <linux/i2c.h>
making the header self-contained.
of: Explicitly include <linux/types.h> and <linux/err.h>
<linux/of_platform.h> uses resource_size_t and relies on the transitive
include <linux/mod_devicetable.h> -> <linux/types.h>. It also uses error
constants and thus relying on the include chain
<linux/mod_devicetable.h> -> <linux/uuid.h> -> <linux/string.h> ->
<linux/err.h>.
With the plan to split <linux/mod_devicetable.h> per subsystem and then
only letting of_platform.h include the of-specific bits (which don't
require these two headers), add the needed includes explicitly to keep
the header self-contained.
platform/x86: msi-ec: Ensure dmi_system_id is defined
Currently <linux/acpi.h> includes <linux/mod_devicetable.h> and thus
dmi_system_id is available for the driver. To disentangle includes
<linux/acpi.h> will be changed to only include the header for
acpi_device_id instead of the full <linux/mod_devicetable.h>. To prepare
for that include the dedicated header for struct dmi_device_id.
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
All consumers of the latter also include the former, but without that
struct usb_driver and struct usb_device_id (and maybe more) are not
defined. Add an include for <linux/usb.h> to make the header
self-contained.
driver core: platform: Include header for struct platform_device_id
Platform drivers can define an array containing the supported device
variants to be assigned to the struct platform_driver's .id_table.
While a forward declaration of struct platform_device_id is technically
enough to make the driver self-contained, it's reasonable to provide the
(very lightweight) data type definition for that array in
<linux/platform_device.h> to not add that burden to all platform drivers
with an id-table.
Note that currently <linux/device.h> transitively includes
<linux/mod_devicetable.h> that provides struct platform_device_id. But
that include is planned to be replaced by a tighter set of includes that
only define the structures relevant for the stuff in <linux/device.h>.
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
struct device_driver contains pointers of type struct of_device_id* and
struct acpi_device_id* but doesn't ensure these are defined. To make the
header self-contained add the (very lightweight) includes that contain
the respective definitions.
The result is that even when touching an obscure device id struct most
of the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
Implement the first step and define each device id struct in a separate
header (together with its associated #defines).
<linux/mod_devicetable.h> is modified to include all the new headers to
continue to provide the same symbols.
Several headers currently include <linux/mod_devicetable.h>, those that
are most lukrative to include only their subsystem headers only are:
ata: libata-scsi: limit simulated SCSI command copy to response length
The function ata_scsi_rbuf_fill() is used to copy the response of
emulated SCSI commands from ata_scsi_rbuf to the SCSI command's
scatterlist.
Currently, sg_copy_from_buffer() is called with the size argument
set to ATA_SCSI_RBUF_SIZE (2048 bytes). Since ata_scsi_rbuf is
zeroed out before the simulation actor is invoked, copying the
full buffer size causes the remainder of the SCSI command's
transfer buffer (beyond the actual response length 'len') to be
overwritten with zeroes. This clobbers any pre-existing sentinel
values or data in the caller's buffer tail, even though the
correct residual count is reported via scsi_set_resid().
Fix this by passing the actual response length 'len' as the copy
size to sg_copy_from_buffer(), ensuring that the tail of the
caller's buffer remains untouched. Also, add a defensive check
to ensure that the actor does not return a length exceeding the
static buffer capacity. If this occurs, trigger a WARN_ON(),
fail the command with an aborted command error, and return
immediately without copying any data.
The fix was tested by invoking an SCSI SG_IO INQUIRY on
an ATA disk on vanilla build, and build with the fix. Confirmed
that the input buffer's tail end remains unmodified with the fix.
Fixes: 5251ae224d8d ("ata: libata-scsi: Return residual for emulated SCSI commands") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Karuna Ramkumar <rkaruna@google.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Wentao Liang [Thu, 25 Jun 2026 14:18:37 +0000 (22:18 +0800)]
ata: pata_pxa: Fix DMA channel leak on probe error
When dmaengine_slave_config() fails, the DMA channel acquired by
dma_request_chan() is not released before returning the error,
leaking the channel reference.
Fix by adding dma_release_channel() in the error path.
The ata_host_activate() error path already correctly releases the
DMA channel.
Myeonghun Pak [Fri, 26 Jun 2026 08:58:37 +0000 (17:58 +0900)]
ata: sata_gemini: unwind clocks on IDE pinctrl errors
gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then
disables them again while keeping the clocks prepared for later bridge
start and stop operations. If gemini_setup_ide_pins() fails after that,
gemini_sata_probe() returns directly and skips the existing
out_unprep_clk unwind path.
Route the IDE pinctrl failure through out_unprep_clk so the clocks
prepared by gemini_sata_bridge_init() are unprepared before probe
fails.
Fixes: d872ced29d5f ("ata: sata_gemini: Introduce explicit IDE pin control") Co-developed-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Ijae Kim <ae878000@gmail.com> Signed-off-by: Myeonghun Pak <mhun512@gmail.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Bryam Vargas [Tue, 23 Jun 2026 03:23:45 +0000 (22:23 -0500)]
ata: libata-core: Reject an invalid concurrent positioning ranges count
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there.
Suggested-by: Damien Le Moal <dlemoal@kernel.org> Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Fixes: c745dfc541e7 ("libata: fix reading concurrent positioning ranges log") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Bryam Vargas [Sat, 20 Jun 2026 02:54:02 +0000 (21:54 -0500)]
ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus
after entering Device-Initiated Slumber during idle. With the default
med_power_with_dipm policy the link goes down (SStatus 1 SControl 300)
and does not recover, forcing the filesystem read-only. Forcing
max_performance keeps the link stable across prolonged idle.
Add a NOLPM quirk so link power management is disabled for this drive
specifically, leaving it intact for other devices on the host.
Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Initialize task local storage before fork bails out to free the task
(Jann Horn)
- Fix insn_aux_data leak on verifier error path (KaFai Wan)
- Reject BPF inode storage map creation when BPF LSM is uninitialized
(Matt Bobrowski)
- Mask pseudo pointer values in verifier logs when pointer leaks are
not allowed (Nuoqi Gui)
- Harden BPF JIT against spraying via IBPB flush (Pawan Gupta)
- Reject a skb-modifying SK_SKB stream parser since the latter is only
meant to measure the next message (Sechang Lim)
- Fix bpf_refcount_acquire to reject refcounted allocation arguments
with a non-zero fixed offset (Yiyang Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Prefer dirty packs for eBPF allocations
bpf: Prefer packs that won't trigger an IBPB flush on allocation
bpf: Skip redundant IBPB in pack allocator
bpf: Restrict JIT predictor flush to cBPF
x86/bugs: Enable IBPB flush on BPF JIT allocation
bpf: Support for hardening against JIT spraying
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
bpf,fork: wipe ->bpf_storage before bailouts that access it
bpf: Fix insn_aux_data leak on verifier err_free_env path
selftests/bpf: Cover pseudo-BTF ksym log masking
bpf: Mask pseudo pointer values in verifier logs
selftests/bpf: Cover refcount acquire node offsets
bpf: Reject offset refcount acquire arguments
selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser
bpf, sockmap: reject a packet-modifying SK_SKB stream parser
selftests/bpf: don't modify the skb in the strparser parser prog
Merge tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Mostly straightforward fixes here, inconsistent runtime PM handling
due to global device policies, bitfield races, unwind path gaps,
teardown ordering, and a misplaced library flag.
- Fix racy bitfield updates in vfio-pci-core and the mlx5 vfio-pci
variant driver with a binary split between setup/release and
runtime modified flags. These were noted across several Sashiko
reviews as pre-existing issues (Alex Williamson)
- Fix runtime PM inconsistency where the vfio-pci driver module_init
could modify the idle PM policy of existing devices through globals
managed in vfio-pci-core, leading to unbalanced runtime PM
operations (Alex Williamson)
- Restore mutability of writable vfio-pci module options by further
pulling policy globals out of vfio-pci-core, to instead be latched
per device at device init. Provide visibility of the per device
latched values through debugfs (Alex Williamson)
- Reorder device debugfs removal before device_del() to avoid gap
where debugfs is available with stale devres pointers (Alex
Williamson)
- Move UUID library linking flag from vfio selftest Makefile into
libvfio.mk to avoid exposing such dependencies when linking with
KVM selftests (Sean Christopherson)"
* tag 'vfio-v7.2-rc2' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Add luuid to libvfio.mk's list of libraries, not to the Makefile
vfio/pci: Expose latched module parameter policy in debugfs
vfio: Remove device debugfs before releasing devres
vfio/pci: Latch all module parameters per device
vfio/mlx5: Fix racy bitfields and tighten struct layout
vfio/pci: Fix racy bitfields and tighten struct layout
vfio/pci: Release the VGA arbiter client on register_device() failure
vfio/pci: Latch disable_idle_d3 per device
Dave Airlie [Thu, 2 Jul 2026 22:53:09 +0000 (08:53 +1000)]
Merge tag 'drm-misc-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc2:
- Fix potential null pointer dereference in dma-buf.
- Handle 0 in dma_fence_dedup_array.
- Use the correct callback in dma_fence_timeline_name.
- Fix device removal handling in amdxdna.
- kernel-doc fixes.
- Include header fix for drm_ras.h
- Handle edids better in virtio.
- Use the clk_bulk api for error handling in malidp.
- More clk handling fixes for komeda.
- panthor scheduler block fallout fixes.
- panthor unplug fixes.
- other panthor fixes.
- Fix unnecessary WARN_ON in topology probe after teardown.
- Add refcount to amdxdna job to fix use-after free.
- Fix increasing args->size in ioctl's of drm/imagination.
- Handle stride correctly in pvr_set_uobj_array.
- Only call imagination's drm_sched_entity_fini once.
Dave Airlie [Thu, 2 Jul 2026 22:43:58 +0000 (08:43 +1000)]
Merge tag 'drm-xe-fixes-2026-07-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Wedge from the timeout handler only after releasing the queue (Rodrigo)
- Fix a NULL pointer dereference (Francois)
- Remove redundant exec_queue_suspended (Lu)
- RTP / OA whitelist fixes (Ashutosh, Gustavo, Thomas)
- Return error on non-migratable faults requiring devmem (Matt Brost)
- Skip FORCE_WC and vm_bound check for external dma-bufs (Matt Auld)
- Hold notifier lock for write on inject test path (Shuicheng)
- Drop bogus static from finish in force_invalidate (Shuicheng)
- Fix double-free of managed BO in error path (Shuicheng)
- Don't attempt to process FAST_REQ or EVENT relays (Michal)
- Fix NPD in bo_meminfo (Matthew Auld)
- Prevent invalid cursor access for purged BOs (Matthew Auld)
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG (Ashutosh)
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
The commit cited below should not have been merged. It attemted to fix an
existing problem ansd thereby introduced new problems by keeping the
pi_state in state Q_REQUEUE_PI_IN_PROGRESS and leaking it.
Based on the commit description the intention was to handle the case
when task_blocks_on_rt_mutex() returns -EDEADLK and the following
remove_waiter() dereferences the NULL pointer in waiter->task.
That is already handled by Davidlohr in commit 40a25d59e85b3
("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued") and
requires no further acting.
Revert the commit breaking the "waiter == owner" case again.
Fixes: 74e144274af39 ("futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock") Reported-by: Michael Bommarito <michael.bommarito@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260701131150.0Ijhq4Dw@linutronix.de Closes: https://lore.kernel.org/all/20260629020049.2082397-1-michael.bommarito@gmail.com
John Madieu [Tue, 30 Jun 2026 17:53:29 +0000 (17:53 +0000)]
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
scu_supply is enabled alongside scu and scu_x2 during normal SRC
operation, but rsnd_src_suspend() and rsnd_src_resume() only disable
and re-enable scu and scu_x2. The supply clock is left enabled across
a system suspend and its prepare/enable refcount becomes unbalanced
after a suspend/resume cycle.
Disable scu_supply in rsnd_src_suspend() and re-enable it in
rsnd_src_resume() so the SRC clocks are managed consistently across
system PM transitions.
Fixes: ef19ecf042b4 ("ASoC: rsnd: Add system suspend/resume support") Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260630175329.4145703-1-john.madieu.xa@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
Gerald Schaefer [Tue, 23 Jun 2026 17:44:06 +0000 (19:44 +0200)]
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records.
Jiri Olsa [Wed, 1 Jul 2026 11:13:25 +0000 (13:13 +0200)]
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer.
Fixes: ba2bfc97b462 ("uprobes/x86: Add support to optimize uprobes") Reported-by: syzbot+61ce80689253f42e6d80@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: syzbot+61ce80689253f42e6d80@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260701111337.53943-2-jolsa@kernel.org
David Windsor [Tue, 30 Jun 2026 00:13:34 +0000 (20:13 -0400)]
selftests/x86: Add shadow stack uprobe CALL test
Add coverage for entry uprobes installed on CALL instructions while user
shadow stack is enabled. The test puts an entry uprobe on a helper whose
first instruction is a relative CALL, then verifies that the call/return
sequence completes without SIGSEGV.
This catches regressions where x86 uprobe CALL emulation updates the
regular user stack but leaves the CET shadow stack stale.
David Windsor [Tue, 30 Jun 2026 00:13:33 +0000 (20:13 -0400)]
x86/uprobes: Keep shadow stack in sync for emulated CALLs
Uprobe CALL emulation updates the normal user stack, but not the CET user
shadow stack. The subsequent RET then sees a stale shadow stack entry and
raises #CP.
Update the relative CALL emulation and XOL CALL fixup paths to keep the
shadow stack in sync.
Fixes: 488af8ea7131 ("x86/shstk: Wire in shadow stack interface") Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: https://patch.msgid.link/8b5b1c7407b98f31664ad7b6a6faf20d2d4a6cad.1782777969.git.dwindsor@gmail.com
Taeyang Lee [Sun, 14 Jun 2026 14:22:18 +0000 (23:22 +0900)]
perf/core: Detach event groups during remove_on_exec
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context.
Matthew Auld [Thu, 25 Jun 2026 15:20:58 +0000 (16:20 +0100)]
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8418 Fixes: ad9843aac91a ("drm/xe/madvise: Implement purgeable buffer object support") Assisted-by: Copilot:gemini-3.1-pro-preview Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Arvind Yadav <arvind.yadav@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev> Link: https://patch.msgid.link/20260625152054.450125-8-matthew.auld@intel.com
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Matthew Auld [Thu, 25 Jun 2026 15:20:56 +0000 (16:20 +0100)]
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8419 Fixes: ad9843aac91a ("drm/xe/madvise: Implement purgeable buffer object support") Assisted-by: Copilot:gemini-3.1-pro-preview Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Arvind Yadav <arvind.yadav@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev> Link: https://patch.msgid.link/20260625152054.450125-6-matthew.auld@intel.com
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Michal Wajdeczko [Wed, 27 May 2026 18:37:35 +0000 (20:37 +0200)]
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
Shuicheng Lin [Fri, 26 Jun 2026 21:06:31 +0000 (21:06 +0000)]
drm/xe/hw_engine: Fix double-free of managed BO in error path
The error path in hw_engine_init() explicitly frees a BO allocated
with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm().
Since the managed BO already has a devm cleanup action registered,
this causes a double-free when devm unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
Shuicheng Lin [Thu, 25 Jun 2026 22:44:52 +0000 (22:44 +0000)]
drm/xe/userptr: Drop bogus static from finish in force_invalidate
The local "finish" pointer in xe_vma_userptr_force_invalidate() is
unconditionally written before each read, so the static storage class
serves no purpose. Worse, it makes the variable a process-wide shared
slot: the function's per-VM asserts do not exclude concurrent callers
on different VMs, so two such callers can race on the slot and take
the wrong if (finish) branch.
The function is gated by CONFIG_DRM_XE_USERPTR_INVAL_INJECT
(developer/test option, default n), so production builds are
unaffected.
Drop the static.
Fixes: 18c4e536959e ("drm/xe/userptr: Convert invalidation to two-pass MMU notifier") Assisted-by: Claude:claude-opus-4.7 Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Zongyao Bai <zongyao.bai@intel.com> Link: https://patch.msgid.link/20260625224452.3243231-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit ed382e3b07fae51a09d7290485bff0592f6b168b) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Shuicheng Lin [Thu, 25 Jun 2026 21:56:15 +0000 (21:56 +0000)]
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") Assisted-by: Claude:claude-opus-4.7 Cc: Matthew Auld <matthew.auld@intel.com> Cc: Zongyao Bai <zongyao.bai@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20260625215615.3016892-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
projects / thirdparty / linux.git / log
