This function may copy the pad0 field of struct hl_info_sec_attest to user
mode which has not been initialized, resulting in leakage of kernel heap
data to user mode. To prevent this, use kzalloc() to allocate and zero out
the buffer, which can also eliminate other uninitialized holes, if any.
The mtk_dp driver registers a phy device which is handled by the
phy_mtk_dp driver and assumes that the phy probe will complete
synchronously, proceeding to make use of functionality exposed by that
driver right away. This assumption however is false when the phy driver
is built as a module, causing the mtk_dp driver to fail probe in this
case.
Add the phy_mtk_dp module as a pre-dependency to the mtk_dp module to
ensure the phy module has been loaded before the dp, so that the phy
probe happens synchrounously and the mtk_dp driver can probe
successfully even with the phy driver built as a module.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20231121142938.460846-1-nfraprado@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Layout of FW version 0x0503 is compatible with 0x0502.
Already supported by TI's tas2781-linux-driver tree.
https://git.ti.com/cgit/tas2781-linux-drivers/tas2781-linux-driver/
The Vangogh machine driver variant based on the MAX98388 amplifier, as
found on Valve's Steam Deck OLED, relies on probing via an ACPI match
table. This worked fine until commit 197b1f7f0df1 ("ASoC: amd: Add new
dmi entries to config entry") enabled SOF support for the target machine
(i.e. Galileo product), causing the sound card to enter the deferred
probe state indefinitely:
The issue is related to commit e89f45edb747 ("ASoC: amd: vangogh: Add
check for acp config flags in vangogh platform"), which tries to
mitigate potential conflicts between SOF and generic ACP Vangogh
drivers, due to sharing the PCI device IDs.
However, the solution is effective only if the machine driver is
directly probed by pci-acp5x through platform_device_register_full().
Hence, remove the conflicting ACPI based probing and rely exclusively on
DMI quirks for sound card setup.
Fixes: dba22efd0d17 ("ASoC: amd: vangogh: Add support for NAU8821/MAX98388 variant") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://msgid.link/r/20231209203229.878730-2-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On 9FGV0241, the DIF OE0 is BIT(1) and DIF OE1 is BIT(2), on the other
chips like 9FGV0441 and 9FGV0841 DIF OE0 is BIT(0) and so on. Increment
the index in BIT() macro instead of the result of BIT() macro to shift
the bit correctly on 9FGV0241.
Fixes: 603df193ec51 ("clk: rs9: Support device specific dif bit calculation") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Link: https://lore.kernel.org/r/20231105200642.62792-1-marek.vasut+renesas@mailbox.org Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.
On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.
Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.
Since 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.
This fix has been tested with watchdog-test from selftests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374 Fixes: 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.
The code does this, but only for iLO5.
The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system. Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK. So the test is overly permissive and should
not be limited to only ilo5.
We need to enable this protection for future iLOs not matching the
current PCI IDs.
When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.
This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.
The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.
Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Signed-off-by: Curtis Klein <curtis.klein@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently zynqmp divider round rate is considering single parent and
calculating rate and parent rate accordingly. But if divider clock flag
is set to SET_RATE_PARENT then its not trying to traverse through all
parent rate and not selecting best parent rate from that. So use common
divider_round_rate() which is traversing through all clock parents and
its rate and calculating proper parent rate.
Currently zynqmp clock driver is not calculating closest mux rate and
because of that Linux is not setting proper frequency for CPU and
not able to set given frequency for dynamic frequency scaling.
E.g., In current logic initial acpu clock parent and frequency as below
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_idiv1 0 0 0 2199999978 0 0 50000 Y
acpu0 0 0 0 2199999978 0 0 50000 Y
After changing acpu frequency to 549999994 Hz using CPU freq scaling its
selecting incorrect parent which is not closest frequency.
rpll_to_xpd 0 0 0 1599999984 0 0 50000 Y
acpu0_mux 0 0 0 1599999984 0 0 50000 Y
acpu0_div1 0 0 0 533333328 0 0 50000 Y
acpu0 0 0 0 533333328 0 0 50000 Y
So use __clk_mux_determine_rate_closest() generic function to calculate
closest rate for mux clock. After this change its selecting correct
parent and correct clock rate.
apll1 0 0 0 2199999978 0 0 50000 Y
acpu0_mux 0 0 0 2199999978 0 0 50000 Y
acpu0_div1 0 0 0 549999995 0 0 50000 Y
acpu0 0 0 0 549999995 0 0 50000 Y
Should check return value of f2fs_recover_xattr_data in
__f2fs_setxattr rather than doing invalid retry if error happen.
Also just do set_page_dirty in f2fs_recover_xattr_data when
page is changed really.
Fixes: 50a472bbc79f ("f2fs: do not return EFSCORRUPTED, but try to run online repair") Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The amdgpu_free_extended_power_table is called in every error-handling
paths of amdgpu_parse_extended_power_table. However, after the following
call chain of returning:
amdgpu_parse_extended_power_table
|-> kv_dpm_init / si_dpm_init
(the only two caller of amdgpu_parse_extended_power_table)
|-> kv_dpm_sw_init / si_dpm_sw_init
(the only caller of kv_dpm_init / si_dpm_init, accordingly)
|-> kv_dpm_fini / si_dpm_fini
(goto dpm_failed in xx_dpm_sw_init)
|-> amdgpu_free_extended_power_table
As above, the amdgpu_free_extended_power_table is called twice in this
returning chain and thus a double-free is triggered. Similarily, the
last kfree in amdgpu_parse_extended_power_table also cause a double free
with amdgpu_free_extended_power_table in kv_dpm_fini.
Fixes: 84176663e70d ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables
allocated before need to be freed. However, neither radeon_vm_init
itself nor its caller have done such deallocation.
Fixes: 6d2f2944e95e ("drm/radeon: use normal BOs for the page tables v4") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:
The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 5104fdf50d32 ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not reset Merge while using CMDQ because reset API doesn't
wait for frame done event as CMDQ does and could lead to
underrun when the layer is switching off.
Fixes: aaf94f7c3ae6 ("drm/mediatek: Add display merge async reset control") Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-23-shawn.sung@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return the result of clk_prepare_enable() instead of
always returns 0.
Fixes: f8946e2b6bb2 ("drm/mediatek: Add display MDP RDMA support for MT8195") Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-21-shawn.sung@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hardware manual of both RZ/G2L and RZ/G3S specifies that the reset
monitor registers need to be interrogated when the reset signals are
toggled (chapters "Procedures for Supplying and Stopping Reset Signals"
and "Procedure for Activating Modules"). Without this, there is a
chance that different modules (e.g. Ethernet) are not ready after their
reset signal is toggled, leading to failures (on probe or resume from
deep sleep states).
The same indications are available for RZ/V2M for TYPE-B reset controls.
Code in rzg2l_cpg_reset() is equivalent with the combined code of
rzg2l_cpg_assert() and rzg2l_cpg_deassert(). There is no need to have
different versions thus re-use rzg2l_cpg_assert() and rzg2l_cpg_deassert().
If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.
Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
f2fs_move_file_range() doesn't support migrating compressed cluster
data, let's add the missing check condition and return -EOPNOTSUPP
for the case until we support it.
Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The AVCL register, according to the datasheet, comes in increments
of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented
by 0x3). The current calculation is done by adding the defined
AVCL value in mV to -4400 and then dividing by 200 to get the register
value. Unfortunately if I subtract -4400 from -4400 I get -8800, which
divided by 200 gives me -44. If I instead subtract -4400 from -4400
I get 0, which divided by 200 gives me 0. Based on the datasheet this
is the expected register value.
The only A680 referenced from DeviceTree is patch level 1, which since
commit '90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying
GPU")' isn't a known chip id.
Correct the chip id to allow the A680 to be recognized again.
Fixes: 90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying GPU") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/569839/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver always enables the clocks at probe() and disables them only
at remove(). It is not clear why the driver does this, as it supports
runtime PM, and enables and disables the clocks in the runtime resume
and suspend callbacks. Also, in the case runtime PM is not available,
the driver calls the resume and suspend callbacks manually from probe()
and remove().
Drop the unnecessary clock enable, thus enabling the clocks only when
actually needed.
The driver always calls mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in remove(). This causes multiple WARNs from the
kernel, as the clocks get disabled too many times.
Fix the remove() to call mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in a way that reverses what is done in probe().
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: b7ec3212a73a ("media: bttv: convert to vb2") Tested-by: Dr. David Alan Gilbert <dave@treblig.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.
When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.
So add this back, but this time in the bttv driver rather than in the
vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: b7ec3212a73a ("media: bttv: convert to vb2") Tested-by: Dr. David Alan Gilbert <dave@treblig.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Blocks are tracked by u32, so the max permitted filesize is
(U32_MAX + 1) * BLOCK_SIZE. Additionally, in order to support crypto
data unit sizes of 4K with a 16K block with IV_INO_LBLK_{32,64}, we must
further restrict max filesize to (U32_MAX + 1) * 4096. This does not
affect 4K blocksize f2fs as the natural limit for files are well below
that.
Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size") Signed-off-by: Daniel Rosenberg <drosen@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: d70229f70447 ("drm/radeon/kms: add dpm support for trinity asics") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: 80ea2c129c76 ("drm/radeon/kms: add dpm support for sumo asics (v2)") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY & HOW]
This is to check connector type to avoid
unhandled null pointer for writeback connectors.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Fixes: 60e034f28600 ("drm/amd/display: Revert "drm/amd/display: Use drm_connector in create_validate_stream_for_sink"") Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHAT]
We need to use this function for both amdgpu_dm_connectors
and drm_writeback_connectors. Modify it to operate on
a drm_connector as a common base.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: dbf5d3d02987 ("drm/amd/display: Check writeback connectors in create_validate_stream_for_sink") Signed-off-by: Sasha Levin <sashal@kernel.org>
On sc7280 there are two clk bits for WB2: vbif_cli and clk_ctrl. While
programming the VBIF params of WB, the driver should be toggling the
former bit, while the sc7180_mdp, sc7280_mdp and sm8250_mdp structs
list the latter one.
Correct that to ensure proper programming sequence for WB2 on these
platforms.
Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.
The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.
Finally, solve this by:
- Avoid to enable the power transition interrupt on reset; and
- Ignoring the core_mask and ask the GPU to poweroff both core groups
Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The function _dpu_hw_sspp_setup_scaler3() passes and
dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way
the scaler (QSEED3) block should be programmed. However up to now we
were not setting this field. Set it now, splitting the vig_sblk data
which has different version fields.
Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Fixes: 9b6f4fedaac2 ("drm/msm/dpu: Add SM6125 support") Fixes: 27f0df03f3ff ("drm/msm/dpu: Add SM6375 support") Fixes: 3186acba5cdc ("drm/msm/dpu: Add SM6350 support") Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550") Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP") Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog") Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115") Fixes: dabfdd89eaa9 ("drm/msm/disp/dpu1: add inline rotation support for sc7280") Fixes: f3af2d6ee9ab ("drm/msm/dpu: Add SC8180x to hw catalog") Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog") Fixes: af776a3e1c30 ("drm/msm/dpu: add SM8250 to hw catalog") Fixes: 386fced3f76f ("drm/msm/dpu: add SM8150 to hw catalog") Fixes: b75ab05a3479 ("msm:disp:dpu1: add scaler support on SC7180 display") Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570098/ Link: https://lore.kernel.org/r/20231201234234.2065610-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
We use partial match for connecting DAI link and DAI widget. We need to
use partial match for disconnecting, too.
Fixes: fe88788779fc ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget") Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231204214713.208951-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of
them use the same dai name.
For example, rt712 and rt713 both use "rt712-sdca-aif1" and
sof_sdw_rt_sdca_jack_exit().
As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by
mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after
put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev
being put twice.
Fixes: 5360c6704638 ("ASoC: Intel: sof_sdw: add rt712 support") Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231204214200.203100-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The drv_name in enumeration table for ALC5682I-VS codec does not match
the board id string in machine driver. Modify the entry of "10EC5682"
to enumerate "RTL5682" as well and remove invalid entry.
Fixes: 88b4d77d6035 ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec") Reported-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Brent Lu <brent.lu@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231204214200.203100-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
In case the drm_modeset_register_all() function fails, its error code
will be ignored. Instead make the drm_dev_register() bail out in case of
such an error.
Similar to SC8280XP, the misconfigured SAFE logic causes rather
significant delays in __arm_smmu_tlb_sync(), resulting in poor
performance for things such as USB.
Introduce appropriate SAFE values for SC8180X to correct this.
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: c1124c09e103 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.") Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe function calls dispc_softreset() before runtime PM is enabled
and without enabling any of the DSS clocks. This happens to work by
luck, and we need to make sure the DSS HW is active and the fclk is
enabled.
To fix the above, add a new function, dispc_init_hw(), which does:
This ensures that the reset can be successfully accomplished.
Note that we use pm_runtime_set_active(), not the normal
pm_runtime_get(). The reason for this is that at this point we haven't
enabled the runtime PM yet and also we don't want the normal resume
callback to be called: the dispc resume callback does some initial HW
setup, and it expects that the HW was off (no video ports are
streaming). If the bootloader has enabled the DSS and has set up a
boot time splash-screen, the DSS would be enabled and streaming which
might lead to issues with the normal resume callback.
K2G doesn't have softreset feature. Instead of having every caller of
dispc_softreset() check for K2G, move the check into dispc_softreset(),
and make dispc_softreset() return 0 in case of K2G.
We do a DSS reset in the middle of the dispc_init(). While that happens
to work now, we should really make sure that e..g the fclk, which is
acquired only later in the function, is enabled when doing a reset. This
will be handled in a later patch, but for now, let's move the
dispc_softreset() call to the end of dispc_init(), which is a sensible
place for it anyway.
In the unlikely event of radeon_ring_lock() failing, its errno return
value should be processed. This patch checks said return value and
prints a debug message in case of an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 48c0c902e2e6 ("drm/radeon/kms: add support for CP setup on SI") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It may be possible, albeit unlikely, to encounter integer overflow
during the multiplication of several unsigned int variables, the
result being assigned to a variable 'size' of wider type.
Prevent this potential behaviour by converting one of the multiples
to unsigned long.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 0242f74d29df ("drm/radeon: clean up CS functions in r100.c") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SND_SOC_IMX_RPMSG gained a new dependency and gets selected by SND_SOC_FSL_RPMSG,
which as a result needs to have the same dependency, or produce a build failure
based on that:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=y] && RPMSG [=y] && OF [=y] && I2C [=n]
Selected by [y]:
- SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && (SND_IMX_SOC [=y] || SND_IMX_SOC [=y]=n) && SND_IMX_SOC [=y]!=n
x86_64-linux-ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x11e): undefined reference to `i2c_find_device_by_fwnode'
Fixes: f83d38def6b1 ("ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231129113204.2869356-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
You want correct inumber in the ".." link. And cross-directory
rename does move the source to new parent, even if you'd been asked
to leave a whiteout in the old place.
With below testcase, it may cause dirent corruption, due to it missed
to call f2fs_set_link() to update ".." link to new directory.
- mkdir -p dir/foo
- renameat2 -w dir/foo bar
[ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3]
[FSCK] other corrupted bugs [Fail]
Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT") Cc: Jan Kara <jack@suse.cz> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a couple of building warnings on used uninitialized 'best_m' and
'best_n' local variables by initializing 'best_m' to zero and 'best_n'
to UINT_MAX. This makes compiler happy only. No functional change.
Fixes: ce62f8ea7e3f ("drm/bridge: imx: Add i.MX93 MIPI DSI support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311151746.f7u7dzbZ-lkp@intel.com/ Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123051807.3818342-1-victor.liu@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If we're given a malformed entity in drm_sched_entity_init()--shouldn't
happen, but we verify--with out-of-bounds priority value, we set it to an
allowed value. Fix the expression which sets this limit.
Starting with commit f6038de293f2 ("arm64: dts: imx8qm: Fix VPU core
alias name") the alias for VPU cores uses dashes instead of underscores.
Adjust the alias stem accordingly. Fixes the errors:
amphion-vpu-core 2d040000.vpu-core: can't get vpu core id
amphion-vpu-core 2d050000.vpu-core: can't get vpu core id
Fixes: f6038de293f2 ("arm64: dts: imx8qm: Fix VPU core alias name") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: ed7bb87d3d03 ("media: rkvdec: Enable capture buffer holding for H264") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 340ce50f75a6 ("media: hantro: Enable HOLD_CAPTURE_BUF for H.264") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.
Add them to correctly support flushing.
Fixes: 0c078e310b6d ("media: visl: add virtual stateless decoder driver") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch reverts commit c677d7ae8314
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.
Fix it by removing the cancel_delayed_work_sync function.
Fixes: c677d7ae8314 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack.
Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/ Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload") Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver only frees the reserved irq if priv->irq_enabled is set to
true. However, the driver mistakenly sets priv->irq_enabled to false,
instead of true, in tilcdc_irq_install(), and thus the driver never
frees the irq, causing issues on loading the driver a second time.
With tpd12s015_remove() marked with __exit this function is discarded
when the driver is compiled as a built-in. The result is that when the
driver unbinds there is no cleanup done which results in resource
leakage or worse.
Fix a sparse warning with this message
"warning:dereference of noderef expression". In this context it means we
are dereferencing a __rcu tagged pointer directly.
We should not be directly dereferencing a rcu pointer. To get a normal
(non __rcu tagged pointer) from a __rcu tagged pointer we are using the
function unrcu_pointer(...). The non __rcu tagged pointer then can be
dereferenced just like a normal pointer.
I tested with qemu with this command
qemu-system-x86_64 \
-m 2G \
-smp 2 \
-kernel bzImage \
-append "console=ttyS0 root=/dev/sda earlyprintk=serial net.ifnames=0" \
-drive file=bullseye.img,format=raw \
-net user,host=10.0.2.10,hostfwd=tcp:127.0.0.1:10021-:22 \
-net nic,model=e1000 \
-enable-kvm \
-nographic \
-pidfile vm.pid \
2>&1 | tee vm.log
with lockdep enabled.
For devices like the Anbernic RG351M and RG351P the panel is wired to
an always on regulator. When the device suspends and wakes up, there
are some slight artifacts on the screen that go away over time. If
instead we hold the panel in reset status after it is unprepared,
this does not happen.
projects / thirdparty / kernel / stable.git / log
