s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by: Katya Orlova <e.orlova@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
This is odd to have a of_node_put() just after a for_each_child_of_node()
or a for_each_endpoint_of_node() loop. It should already be called
during the last iteration.
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().
If device_register() returns error in pccardd(), it leads two issues:
1. The socket_released has never been completed, it will block
pcmcia_unregister_socket(), because of waiting for completion
of socket_released.
2. The device name allocated by dev_set_name() is leaked.
Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().
The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.
This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.
This crash is due to the clearing out the cxl_memdev's driver context
(@cxlds) before the subsystem is done with it. This is ultimately due to
the region(s), that this memdev is a member, being torn down and expecting
to be able to de-reference @cxlds, like here:
static int cxl_region_decode_reset(struct cxl_region *cxlr, int count)
...
if (cxlds->rcd)
goto endpoint_reset;
...
Fix it by keeping the driver context valid until memdev-device
unregistration, and subsequently the entire stack of related
dependencies, unwinds.
Fixes: 9cc238c7a526 ("cxl/pci: Introduce cdevm_file_operations") Reported-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().
Fixes: 51a87c552dfd ("9p: rework client code to use new protocol support functions") Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <20231027030302.11927-1-hbh25y@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops. Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.
The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.
Fixes: a611bf473d1f ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices") Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.
Fixes: 6080cd0e9239 ("staging: usbip: claim ports used by shared devices") Signed-off-by: Jonas Blixt <jonas.blixt@actia.se> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.
The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.
Add the padding bytes required to align the next sample with the scan size.
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment. Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.
Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers. One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below). Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.
=============================================================================
BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cd40: cc cc cc cc ....
Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():
spin_lock_irqsave(&hsotg->lock, flags);
...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
...
out:
spin_unlock_irqrestore(&hsotg->lock, flags);
When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.
This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.
To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.
idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.
But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:
[ 21.562803] calling idxd_init_module+0x0/0x110 @ 1
[ 21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[ 21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[ 21.597178] calling dsa_bus_init+0x0/0x20 @ 1
To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.
Fixes: d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone") Reported-by: Michael Prinke <michael.prinke@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lijun Pan <lijun.pan@intel.com> Tested-by: Lijun Pan <lijun.pan@intel.com> Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:
[<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
[<ffffffff81177342>] alloc_pid+0x72/0x570
[<ffffffff81140ac4>] copy_process+0x1374/0x2470
[<ffffffff81141d77>] kernel_clone+0xb7/0x900
[<ffffffff81142645>] __se_sys_clone+0x85/0xb0
[<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
[<ffffffff83965a72>] do_syscall_64+0x32/0x80
[<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.
The pid memleak is triggered by the following race:
task[sshd] task[bash]
----------------------- -----------------------
disassociate_ctty();
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
tty = tty_kref_get(current->signal->tty);
spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
if (tty) {
tty_lock(tty);
...
put_pid(tty->ctrl.pgrp);
tty->ctrl.pgrp = NULL; //It's too late
...
tty_unlock(tty);
}
The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().
To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".
With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.
1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs
/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)
Fixes: 4c8ff7095bef ("f2fs: support data compression") Fixes: 151b1982be5d ("f2fs: compress: add nocompress extensions support") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.
In order to teach the compiler that 'trig->name' will never be truncated,
we need to tell it that 'cpu' is not negative.
When building with W=1, this fixes the following warnings:
drivers/leds/trigger/ledtrig-cpu.c: In function ‘ledtrig_cpu_init’:
drivers/leds/trigger/ledtrig-cpu.c:155:56: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=]
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~
drivers/leds/trigger/ledtrig-cpu.c:155:52: note: directive argument in the range [-2147483648, 7]
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~~~~~~
drivers/leds/trigger/ledtrig-cpu.c:155:17: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false)
gives no guarantees what the PWM output does. It might freeze where it
currently is, or go in a High-Z state or drive the active or inactive
state, it might even continue to toggle.
To ensure that the LED gets really disabled, don't disable the PWM even
when .duty_cycle is zero.
This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is
one of those that freezes its output on disable, so if you disable an
LED that is full on, it stays on. If you disable a LED with half
brightness it goes off in 50% of the cases and full on in the other 50%.
The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.
The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.
When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.
Drop the I2C SMBUS calls and instead use simple I2C transfers.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-2-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not lock driver mutex in the global LED panel brightness sysfs
accessors brightness_show() and brightness_store().
The mutex locking is unnecessary here. The I2C transfers are guarded by
I2C core locking mechanism, and the LED commands itself do not interfere
with other commands.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230802160748.11208-2-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 6de283b96b31 ("leds: turris-omnia: Do not use SMBUS calls") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 9e86b2ad4c11 changed the channel used for HPDET detection
(headphones vs lineout detection) from being hardcoded to
ARIZONA_ACCDET_MODE_HPL (HP left channel) to it being configurable
through arizona_pdata.hpdet_channel the DT/OF parsing added for
filling arizona_pdata on devicetree platforms ensures that
arizona_pdata.hpdet_channel gets set to ARIZONA_ACCDET_MODE_HPL
when not specified in the devicetree-node.
But on ACPI platforms where arizona_pdata is filled by
arizona_spi_acpi_probe() arizona_pdata.hpdet_channel was not
getting set, causing it to default to 0 aka ARIZONA_ACCDET_MODE_MIC.
This causes headphones to get misdetected as line-out on some models.
Fix this by setting hpdet_channel = ARIZONA_ACCDET_MODE_HPL.
Fixes: e933836744a2 ("mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231014205414.59415-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The loop searching for a matching device based on its compatible
string is aborted when a matching disabled device is found.
This abort prevents to add devices as soon as one disabled device
is found.
Continue searching for an other device instead of aborting on the
first disabled one fixes the issue.
Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.
Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.
For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.
In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead
to system UAF (Use-After-Free) issues. Due to the lengthy analysis of
the pcrypt_aead01 function call, I'll describe the problem scenario
using a simplified model:
Suppose there's a user of padata named `user_function` that adheres to
the padata requirement of calling `padata_free_shell` after `serial()`
has been invoked, as demonstrated in the following code:
while (!list_empty(&local_list)) {
...
padata->serial(padata);
cnt++;
}
local_bh_enable();
if (refcount_sub_and_test(cnt, &pd->refcnt))
padata_free_pd(pd);
}
```
Because of the high system load and the accumulation of unexecuted
softirq at this moment, `local_bh_enable()` in padata takes longer
to execute than usual. Subsequently, when accessing `pd->refcnt`,
`pd` has already been released by `padata_free_shell()`, resulting
in a UAF issue with `pd->refcnt`.
The fix is straightforward: add `refcount_dec_and_test` before calling
`padata_free_pd` in `padata_free_shell`.
Fixes: 07928d9bfc81 ("padata: Remove broken queue flushing") Signed-off-by: WangJinchao <wangjinchao@xfusion.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.
Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).
This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.
Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.
Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.
But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.
The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.
Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. Some devices do not like IO being restarted this was addressed in
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary"), but that change has issues of its own and needs to
be reverted.
2. Restarting IO and specifically calling hid_device_io_stop() causes
received packets to be missed, which may cause connect-events to
get missed.
Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.
But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.
Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.
Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary") Suggested-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
HIDPP_QUIRK_NO_HIDINPUT isn't used by any devices but still happens to
work as HIDPP_QUIRK_DELAYED_INIT is defined to the same value. Remove
HIDPP_QUIRK_NO_HIDINPUT and use HIDPP_QUIRK_DELAYED_INIT everywhere
instead.
Tested on a T650 which requires that quirk, and a number of unifying and
Bluetooth devices that don't.
Now that we're in 2022, and the majority of desktop environments can and
should support touchpad gestures through libinput, remove the legacy
module parameter that made it possible to use gestures implemented in
firmware.
This will eventually allow simplifying the driver's initialisation code.
The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit e76fe57447e88916 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.
Fix this by reviving the EARLY_PRINTK config symbol.
Fixes: d0380e6c3c0f6edb ("early_printk: consolidate random copies of identical code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).
Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.
Increase name array to be large enough to overcome the following
compilation error.
drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1
utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.
Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.
Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading") Reviewed-by: Mars Cheng <marscheng@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yen-lin Lai <yenlinlai@google.com> Signed-off-by: Daniel Mentz <danielmentz@google.com> Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW") Signed-off-by: Luoyouming <luoyouming@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.
This patch adds judgement for this situation.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC") Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes the warnings of "Function parameter or member 'xxx'
not described".
>> sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'component' not described in 'psc_dma_trigger'
sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'substream' not described in 'psc_dma_trigger'
sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'cmd' not described in 'psc_dma_trigger'
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310061914.jJuekdHs-lkp@intel.com/ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Fixes: 6d1048bc1152 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops") Link: https://lore.kernel.org/r/87il7fcqm8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
r1 ends up with 0xffffff80 before being used by memset() and the
'a' array will have -128 once in every four bytes while the other
bytes will be set incorrectly to -1 like this (printing the first
8 bytes) :
Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.
Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.
This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
nd_region_acquire_lane uses get_cpu, which disables preemption. This is
an issue on PREEMPT_RT kernels, since btt_write_pg and also
nd_region_acquire_lane itself take a spin lock, resulting in BUG:
sleeping function called from invalid context.
Fix the issue by replacing get_cpu with smp_process_id and
migrate_disable when needed. This makes BTT operations preemptible, thus
permitting the use of spin_lock.
BUG example occurring when running ndctl tests on PREEMPT_RT kernel:
Use devm_kstrdup() instead of kstrdup() and check its return value to
avoid memory leak.
Fixes: 49bddc73d15c ("libnvdimm/of_pmem: Provide a unique name for bus provider") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.
Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().
Fixes: 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanup") Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` provides against potential integer
overflows is defeated. Fix this by hardening calls to `struct_size()`
with `size_add()`, `size_sub()` and `size_mul()`.
Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") Fixes: a4676388e2e2 ("RDMA/core: Simplify how the gid_attrs sysfs is created") Fixes: e9dd5daf884c ("IB/umad: Refactor code to use cdev_device_add()") Fixes: 324e227ea7c9 ("RDMA/device: Add ib_device_get_by_netdev()") Fixes: 5aad26a7eac5 ("IB/core: Use struct_size() in kzalloc()") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZQdt4NsJFwwOYxUR@work Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.
To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.
Fixes: 9f6ec8dc574e ("hwrng: geode - Fix PCI device refcount leak") Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882 Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com> Suggested-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.
Return error in case the benchmark command does not fit to the space
allocated for it.
Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().
The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.
Fix format specifiers so they match the passed variables.
Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.
Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first compatible entry for the jpegenc should be 'nxp,imx8qm-jpgenc'.
Change it accordingly to fix the following schema warning:
imx8qm-apalis-eval.dtb: jpegenc@58450000: compatible: 'oneOf' conditional failed, one must be fixed:
'nxp,imx8qm-jpgdec' is not one of ['nxp,imx8qxp-jpgdec', 'nxp,imx8qxp-jpgenc']
'nxp,imx8qm-jpgenc' was expected
'nxp,imx8qxp-jpgdec' was expected
Commit 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical
partitions") added an ID to the FFA device using ida_alloc() and append
the same to "arm-ffa" to make up a unique device name. However it missed
to stash the id value in ffa_dev to help freeing the ID later when the
device is destroyed.
Due to the missing/unassigned ID in FFA device, we get the following
warning when the FF-A device is unregistered.
| ida_free called for id=0 which is not allocated.
| WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164
| CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : ida_free+0x114/0x164
| lr : ida_free+0x114/0x164
| Call trace:
| ida_free+0x114/0x164
| ffa_release_device+0x24/0x3c
| device_release+0x34/0x8c
| kobject_put+0x94/0xf8
| put_device+0x18/0x24
| klist_devices_put+0x14/0x20
| klist_next+0xc8/0x114
| bus_for_each_dev+0xd8/0x144
| arm_ffa_bus_exit+0x30/0x54
| ffa_init+0x68/0x330
| do_one_initcall+0xdc/0x250
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x104/0x170
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
Fix the same by actually assigning the ID in the FFA device this time
for real.
The TI-SCI message protocol provides a way to communicate between
various compute processors with a central system controller entity. It
provides the fundamental device management capability and clock control
in the SOCs that it's used in.
The remove function failed to do all the necessary cleanup if
there are registered users. Some things are freed however which
likely results in an oops later on.
Ensure that the driver isn't unbound by suppressing its bind and unbind
sysfs attributes. As the driver is built-in there is no way to remove
device once bound.
We can also remove the ti_sci_remove call along with the
ti_sci_debugfs_destroy as there are no callers for it any longer.
Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/ Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it.
Fixed regulator put under "regulators" node will not be populated,
unless simple-bus or something similar is used. Drop the "regulators"
wrapper node to fix this.
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.
apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
from schema display/bridge/adi,adv7533.yaml
Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the
pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins"
and update the node name to "cp0-spi-pins-1" to avoid confusion with the
pinctrl options for SPI0.
Fixes: 4c43a41e5b8c ("arm64: dts: cn913x: add device trees for topology B boards") Fixes: 5c0ee54723f3 ("arm64: dts: add support for Marvell cn9130-crb platform") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two entries for similar reserved memory: qseecom@cb400000 and
audio@cb400000. Keep the qseecom as it is longer.
Warning (unique_unit_address_if_enabled): /reserved-memory/audio@cb400000: duplicate unit-address (also used in node /reserved-memory/qseecom@cb400000)
When we fail to register the uncore pmu, the pmu context may not been
allocated. The error handing will call cpuhp_state_remove_instance()
to call uncore pmu offline callback, which migrate the pmu context.
Since that's liable to lead to some kind of use-after-free.
Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been failed to register.
Fixes: a0ab25cd82ee ("drivers/perf: hisi: Add support for HiSilicon PA PMU driver")
FIxes: 3bf30882c3c7 ("drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver") Signed-off-by: Junhao He <hejunhao3@huawei.com> Link: https://lore.kernel.org/r/20231024113630.13472-1-hejunhao3@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly
renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning,
both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the
later calculation for horizontal sync-active (HSA), back (HBP) and
front (HFP) porches got incorrect due to the logic being inverted.
This means that a number of settings were wrong because....:
- DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be
set in order to disable the End of Transmission packet;
- Horizontal Sync and Back/Front porches: The delta used to
calculate all of HSA, HBP and HFP should account for the
additional EOT packet.
Before this change...
- Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled;
- For HSA/HBP/HFP delta... all three were wrong, as words were
added when EOT disabled, instead of when EOT packet enabled!
Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the
MediaTek DSI driver to fix the aforementioned issues.
Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp") Fixes: c87d1c4b5b9a ("drm/mediatek: dsi: Use symbolized register definition") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Tested-by: Michael Walle <mwalle@kernel.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20230523104234.7849-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use exiting function to free the allocated GEM object instead of
open-coding it. This has a bonus of internally calling
msm_gem_put_vaddr() to compensate for msm_gem_get_vaddr() in
msm_get_kernel_new().
Fixes: 1e29dff00400 ("drm/msm: Add a common function to free kernel buffer objects") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/562239/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Linux enables MSI-X before disabling INTx, but keeps MSI-X masked until
the table is filled. Then it disables INTx just before clearing MASKALL
bit. Currently this approach is rejected by xen-pciback.
According to the PCIe spec, device cannot use INTx when MSI/MSI-X is
enabled (in other words: enabling MSI/MSI-X implicitly disables INTx).
Change the logic to consider INTx disabled if MSI/MSI-X is enabled. This
applies to three places:
- checking currently enabled interrupts type,
- transition to MSI/MSI-X - where INTx would be implicitly disabled,
- clearing INTx disable bit - which can be allowed even if MSI/MSI-X is
enabled, as device should consider INTx disabled anyway in that case
The "ret" variable is declared as ssize_t and it can hold negative error
codes but the "rk_obj->base.size" variable is type size_t. This means
that when we compare them, they are both type promoted to size_t and the
negative error code becomes a high unsigned value and is treated as
success. Add a cast to fix this.
When KPTI is in use, we cannot register a runstate region as XEN
requires that this is always a valid VA, which we cannot guarantee. Due
to this, xen_starting_cpu() must avoid registering each CPU's runstate
region, and xen_guest_init() must avoid setting up features that depend
upon it.
We tried to ensure that in commit:
f88af7229f6f22ce (" xen/arm: do not setup the runstate info page if kpti is enabled")
... where we added checks for xen_kernel_unmapped_at_usr(), which wraps
arm64_kernel_unmapped_at_el0() on arm64 and is always false on 32-bit
arm.
Unfortunately, as xen_guest_init() is an early_initcall, this happens
before secondary CPUs are booted and arm64 has finalized the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap which backs
arm64_kernel_unmapped_at_el0(), and so this can subsequently be set as
secondary CPUs are onlined. On a big.LITTLE system where the boot CPU
does not require KPTI but some secondary CPUs do, this will result in
xen_guest_init() intializing features that depend on the runstate
region, and xen_starting_cpu() registering the runstate region on some
CPUs before KPTI is subsequent enabled, resulting the the problems the
aforementioned commit tried to avoid.
Handle this more robsutly by deferring the initialization of the
runstate region until secondary CPUs have been initialized and the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap has been finalized. The per-cpu work is
moved into a new hotplug starting function which is registered later
when we're certain that KPTI will not be used.
Fixes: f88af7229f6f ("xen/arm: do not setup the runstate info page if kpti is enabled") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Bertrand Marquis <bertrand.marquis@arm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If DSI host attachment fails, the LT9611UXC driver will remove the
bridge without ensuring that there is no outstanding HPD work being
done. In rare cases this can result in the warnings regarding the mutex
being incorrect. Fix this by forcebly freing IRQ and flushing the work.
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.
projects / thirdparty / kernel / stable.git / log
