Benjamin Cheng [Mon, 30 Mar 2026 19:01:27 +0000 (15:01 -0400)]
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW.
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Benjamin Cheng [Wed, 25 Mar 2026 12:39:19 +0000 (08:39 -0400)]
drm/amdgpu: Add bounds checking to ib_{get,set}_value
The uvd/vce/vcn code accesses the IB at predefined offsets without
checking that the IB is large enough. Check the bounds here. The caller
is responsible for making sure it can handle arbitrary return values.
Also make the idx a uint32_t to prevent overflows causing the condition
to fail.
Signed-off-by: Benjamin Cheng <benjamin.cheng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/amd/display: Fix missing parameter details in amdgpu_dm_ism
Update comments in dm_ism_get_idle_allow_delay() and
dm_ism_insert_record() to better reflect their behavior and inputs.
dm_ism_get_idle_allow_delay() computes the delay before allowing
idle optimizations based on history and stream timing.
dm_ism_insert_record() stores idle duration records in the
circular history buffer.
These functions explain what they do, but they do not explain what their
inputs mean.
Fixes the below with gcc W=1:
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'current_state' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'event' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'next_state' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:153 function parameter 'ism' not described in 'dm_ism_get_idle_allow_delay'
../display/amdgpu_dm/amdgpu_dm_ism.c:153 function parameter 'stream' not described in 'dm_ism_get_idle_allow_delay'
../display/amdgpu_dm/amdgpu_dm_ism.c:216 function parameter 'ism' not described in 'dm_ism_insert_record'
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'current_state' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'event' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:44 function parameter 'next_state' not described in 'dm_ism_next_state'
../display/amdgpu_dm/amdgpu_dm_ism.c:153 function parameter 'ism' not described in 'dm_ism_get_idle_allow_delay'
../display/amdgpu_dm/amdgpu_dm_ism.c:153 function parameter 'stream' not described in 'dm_ism_get_idle_allow_delay'
../display/amdgpu_dm/amdgpu_dm_ism.c:216 function parameter 'ism' not described in 'dm_ism_insert_record'
Fixes: 754003486c3c ("drm/amd/display: Add Idle state manager(ISM)") Cc: Ray Wu <ray.wu@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix parameter mismatch in panel self-refresh helper
Align parameter names with function arguments.
The function controls panel self-refresh enable/disable based on vblank
and VRR state.
Fixes the below with gcc W=1:
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'dm' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'acrtc' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'stream' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'dm' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'acrtc' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
../display/amdgpu_dm/amdgpu_dm_crtc.c:131 function parameter 'stream' not described in 'amdgpu_dm_crtc_set_panel_sr_feature'
Fixes: 754003486c3c ("drm/amd/display: Add Idle state manager(ISM)") Cc: Ray Wu <ray.wu@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chenyu Chen [Tue, 31 Mar 2026 03:14:26 +0000 (11:14 +0800)]
drm/edid: Parse AMD Vendor-Specific Data Block
Parse the AMD VSDB v3 from CTA extension blocks and store the result
in struct drm_amd_vsdb_info, a new field of drm_display_info. This
includes replay mode, panel type, and luminance ranges.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix dc_is_fp_enabled name mismatch
Fix incorrect function name in comment to match dc_is_fp_enabled.
This function checks if FPU is currently active by reading a counter.
The FPU helpers manage safe usage of FPU in the kernel by tracking when
it starts and stops, avoiding misuse or crashes.
Fixes: 3539437f354b ("drm/amd/display: Move FPU Guards From DML To DC - Part 1") Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Dillon Varone <dillon.varone@amd.com> Cc: Rafal Ostrowski <rafal.ostrowski@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ionut Nechita [Mon, 23 Mar 2026 21:13:43 +0000 (23:13 +0200)]
drm/amd/display: Wire up dcn10_dio_construct() for all pre-DCN401 generations
Description:
- Commit b82f0759346617b2 ("drm/amd/display: Migrate DIO registers access
from hwseq to dio component") moved DIO_MEM_PWR_CTRL register access
behind the new dio abstraction layer but only created the dio object for
DCN 4.01. On all other generations (DCN 10/20/21/201/30/301/302/303/
31/314/315/316/32/321/35/351/36), the dio pointer is NULL, causing the
register write to be silently skipped.
This results in AFMT HDMI memory not being powered on during init_hw,
which can cause HDMI audio failures and display issues on affected
hardware including Renoir/Cezanne (DCN 2.1) APUs that use dcn10_init_hw.
Call dcn10_dio_construct() in each older DCN generation's resource.c
to create the dio object, following the same pattern as DCN 4.01. This
ensures the dio pointer is non-NULL and the mem_pwr_ctrl callback works
through the dio abstraction for all DCN generations.
Fixes: b82f07593466 ("drm/amd/display: Migrate DIO registers access from hwseq to dio component.") Reviewed-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a4983968fa5b3179ab090407d325a71cdc96874e)
Dave Airlie [Fri, 3 Apr 2026 08:56:58 +0000 (18:56 +1000)]
Merge tag 'drm-msm-next-2026-04-02' of https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
Historically DSI PHY bindings landed to the display/msm subdir, however
they describe PHYs and as such they should be in the phy/ subdir.
Follow the example of other Qualcomm display-related PHYs (HDMI, eDP)
and move bindings for the Qualcomm DSI PHYs to the correct subdir.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/709008/ Link: https://lore.kernel.org/r/20260305-msm-dsi-phy-v1-1-0a99ac665995@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The driver references CWB array from SM8650, but should use the Eliza
specific, which has different register space sizes. This should not
have noticeable impact on function but is indeed confusing, since the
Eliza table is used for .cwb_count.
Fixes: 0eb707bbc7fc ("drm/msm/dpu: Add support for Eliza SoC") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/715623/ Link: https://lore.kernel.org/r/20260331161156.211623-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Vladimir Oltean [Fri, 27 Mar 2026 18:46:53 +0000 (20:46 +0200)]
drm/msm/dp: remove debugging prints with internal struct phy state
These do not provide much value, and will become hard to maintain once
the Generic PHY framework starts hiding the contents of struct phy from
consumers.
Due to historical reasons we ended up with dummy values being specified
for MST-related interfaces some of them had INTF_NONE, others had
non-existing DP controller indices. Those workarounds are no longer
necessary. Fix types and indices for all DP-MST related INTF instances.
The only exception is INTF_3 on SC8180X, which has unique design. It can
be used either with INTF_0 / DP0 or with INTF_4 / DP1. This interface is
left with the dummy value until somebody implements necessary bits for
that platform.
Dmitry Baryshkov [Wed, 25 Mar 2026 03:06:06 +0000 (05:06 +0200)]
drm/msm/mdp5: drop workarounds specific to MDP5 1.0
With support for MSM8974v1 being removed from the driver, there is no
need to keep workarounds specific to that particular MDP5 revision. Drop
them, slightly simplifying the logic.
Dmitry Baryshkov [Wed, 25 Mar 2026 02:59:02 +0000 (04:59 +0200)]
drm/msm/mdp5: drop single flush support
Support for using a single CTL for flushing both interfaces was not in
use since the MDP5 driver dropped support for dual DSI configurations in
the commit df3c7899946c ("drm/msm/mdp5: drop split display support").
Having the MDP 3.x support migrated to the DPU driver the single CTL
flush is applicable to the platforms suspproted by the MDP5 driver. Drop
it alltogether.
Thomas Hellström [Tue, 31 Mar 2026 09:20:20 +0000 (11:20 +0200)]
drm/msm: Remove abuse of drm_exec internals
The code was reading drm_exec internal state to determine whether
the drm_exec structure had been initialized or not, and therefore
needed cleaning up, relying on undocumented behaviour.
Instead add a bool to struct msm_gem_submit to indicate whether
drm_exec cleaning up is needed.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/715502/
Message-ID: <20260331092023.81616-3-thomas.hellstrom@linux.intel.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Dave Airlie [Tue, 31 Mar 2026 21:20:59 +0000 (07:20 +1000)]
Merge tag 'drm-rust-next-2026-03-30' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.1-rc1
- DMA:
- Rework the DMA coherent API: introduce Coherent<T> as a generalized
container for arbitrary types, replacing the slice-only
CoherentAllocation<T>. Add CoherentBox for memory initialization
before exposing a buffer to hardware (converting to Coherent when
ready), and CoherentHandle for allocations without kernel mapping.
- Add Coherent::init() / init_with_attrs() for one-shot initialization
via pin-init, and from-slice constructors for both Coherent and
CoherentBox
- Add uaccess write_dma() for copying from DMA buffers to userspace
and BinaryWriter support for Coherent<T>
- DRM:
- Add GPU buddy allocator abstraction
- Add DRM shmem GEM helper abstraction
- Allow drm::Device to dispatch work and delayed work items to driver
private data
- Add impl_aref_for_gem_obj!() macro to reduce GEM refcount
boilerplate, and introduce DriverObject::Args for constructor
context
- Add dma_resv_lock helper and raw_dma_resv() accessor on GEM objects
- Clean up imports across the DRM module
- I/O:
- Merged via a signed tag from the driver-core tree: register!() macro
and I/O infrastructure improvements (IoCapable refactor, RelaxedMmio
wrapper, IoLoc trait, generic accessors, write_reg /
LocatedRegister)
- Nova (Core):
- Fix and harden the GSP command queue: correct write pointer
advancing, empty slot handling, and ring buffer indexing; add mutex
locking and make Cmdq a pinned type; distinguish wait vs no-wait
commands
- Add support for large RPCs via continuation records, splitting
oversized commands across multiple queue slots
- Simplify GSP sequencer and message handling code: remove unused
trait and Display impls, derive Debug and Zeroable where applicable,
warn on unconsumed message data
- Refactor Falcon firmware handling: create DMA objects lazily, add
PIO upload support, and use the Generic Bootloader to boot FWSEC on
Turing
- Convert all register definitions (PMC, PBUS, PFB, GC6, FUSE, PDISP,
Falcon) to the kernel register!() macro; add bounded_enum macro to
define enums usable as register fields
- Migrate all DMA usage to the new Coherent, CoherentBox, and
CoherentHandle APIs
- Harden firmware parsing with checked arithmetic throughout FWSEC,
Booter, RISC-V parsing paths
- Add debugfs support for reading GSP-RM log buffers; replace
module_pci_driver!() with explicit module init to support
module-level debugfs setup
- Fix auxiliary device registration for multi-GPU systems
Akhil P Oommen [Fri, 27 Mar 2026 00:14:06 +0000 (05:44 +0530)]
drm/msm/adreno: Expose a PARAM to check AQE support
AQE (Applicaton Qrisc Engine) is required to support VK ray-pipeline. Two
conditions should be met to use this HW:
1. AQE firmware should be loaded and programmed
2. Preemption support
Expose a new MSM_PARAM to allow userspace to query its support.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714685/
Message-ID: <20260327-a8xx-gpu-batch2-v2-17-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:05 +0000 (05:44 +0530)]
drm/msm/a6xx: Enable Preemption on X2-85
Add the save-restore register lists and set the necessary quirk flags
in the catalog to enable the Preemption feature on Adreno X2-85 GPU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714684/
Message-ID: <20260327-a8xx-gpu-batch2-v2-16-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:04 +0000 (05:44 +0530)]
drm/msm/a8xx: Preemption support for A840
The programing sequence related to preemption is unchanged from A7x. But
there is some code churn due to register shuffling in A8x. So, split out
the common code into a header file for code sharing and add/update
additional changes required to support preemption feature on A8x GPUs.
Finally, enable the preemption quirk in A840's catalog to enable this
feature.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714682/
Message-ID: <20260327-a8xx-gpu-batch2-v2-15-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:03 +0000 (05:44 +0530)]
drm/msm/a8xx: Implement IFPC support for A840
Implement pwrup reglist support and add the necessary register
configurations to enable IFPC support on A840
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714679/
Message-ID: <20260327-a8xx-gpu-batch2-v2-14-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:02 +0000 (05:44 +0530)]
drm/msm/a6xx: Add SKU detection support for X2-85
Add the Speedbin table to the catalog to enable SKU detection support
for X2-85 GPU found in Glymur chipset. As this chipset support the SOFT
FUSE mechanism, enable the ADRENO_QUIRK_SOFTFUSE quirk too.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714677/
Message-ID: <20260327-a8xx-gpu-batch2-v2-13-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:01 +0000 (05:44 +0530)]
drm/msm/a6xx: Add soft fuse detection support
Recent chipsets like Glymur supports a new mechanism for SKU detection.
A new CX_MISC register exposes the combined (or final) speedbin value
from both HW fuse register and the Soft Fuse register. Implement this new
SKU detection along with a new quirk to identify the GPUs that has soft
fuse support.
There is a side effect of this patch on A4x and older series. The
speedbin field in the MSM_PARAM_CHIPID will be 0 instead of 0xffff. This
should be okay as Mesa correctly handles it. Speedbin was not even a
thing when those GPUs' support were added.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714676/
Message-ID: <20260327-a8xx-gpu-batch2-v2-12-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:14:00 +0000 (05:44 +0530)]
drm/msm/a8xx: Add SKU table for A840
Add the SKU table in the catalog for A840 GPU. This data helps to pick
the correct bin from the OPP table based on the speed_bin fuse value.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714673/
Message-ID: <20260327-a8xx-gpu-batch2-v2-11-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:59 +0000 (05:43 +0530)]
drm/msm/a6xx: Update HFI definitions
Update the HFI definitions to support additional GMU based power
features.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714671/
Message-ID: <20260327-a8xx-gpu-batch2-v2-10-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:58 +0000 (05:43 +0530)]
drm/msm/a6xx: Use packed structs for HFI
HFI related structs define the ABI between the KMD and the GMU firmware.
So, use packed structures to avoid unintended compiler inserted padding.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714669/
Message-ID: <20260327-a8xx-gpu-batch2-v2-9-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:56 +0000 (05:43 +0530)]
drm/msm/a6xx: Add support for Debug HFI Q
Add the Debug HFI Queue which contains the F2H messages posted from the
GMU firmware. Having this data in coredump is useful to debug firmware
issues.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714666/
Message-ID: <20260327-a8xx-gpu-batch2-v2-7-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:55 +0000 (05:43 +0530)]
drm/msm/a6xx: Fix gpu init from secure world
A7XX_GEN2 and newer GPUs requires initialization of few configurations
related to features/power from secure world. The SCM call to do this
should be triggered after GDSC and clocks are enabled. So, keep this
sequence to a6xx_gmu_resume instead of the probe.
Also, simplify the error handling in a6xx_gmu_resume() using 'goto'
labels.
Fixes: 14b27d5df3ea ("drm/msm/a7xx: Initialize a750 "software fuse"") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714664/
Message-ID: <20260327-a8xx-gpu-batch2-v2-6-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:53 +0000 (05:43 +0530)]
drm/msm/a6xx: Correct OOB usage
During the GMU resume sequence, using another OOB other than OOB_GPU may
confuse the internal state of GMU firmware. To align more strictly with
the downstream sequence, move the sysprof related OOB setup after the
OOB_GPU is cleared.
Fixes: 62cd0fa6990b ("drm/msm/adreno: Disable IFPC when sysprof is active") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714659/
Message-ID: <20260327-a8xx-gpu-batch2-v2-4-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:52 +0000 (05:43 +0530)]
drm/msm/a6xx: Switch to preemption safe AO counter
CP_ALWAYS_ON_COUNTER is not save-restored during preemption, so it won't
provide accurate data about the 'submit' when preemption is enabled.
Switch to CP_ALWAYS_ON_CONTEXT which is preemption safe.
Fixes: e7ae83da4a28 ("drm/msm/a6xx: Implement preemption for a7xx targets") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714657/
Message-ID: <20260327-a8xx-gpu-batch2-v2-3-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:51 +0000 (05:43 +0530)]
drm/msm/a8xx: Fix the ticks used in submit traces
GMU_ALWAYS_ON_COUNTER_* registers got moved in A8x, but currently, A6x
register offsets are used in the submit traces instead of A8x offsets.
To fix this, refactor a bit and use adreno_gpu->funcs->get_timestamp()
everywhere.
While we are at it, update a8xx_gmu_get_timestamp() to use the GMU AO
counter.
Fixes: 288a93200892 ("drm/msm/adreno: Introduce A8x GPU Support") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714655/
Message-ID: <20260327-a8xx-gpu-batch2-v2-2-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Akhil P Oommen [Fri, 27 Mar 2026 00:13:50 +0000 (05:43 +0530)]
drm/msm/a6xx: Use barriers while updating HFI Q headers
To avoid harmful compiler optimizations and IO reordering in the HW, use
barriers and READ/WRITE_ONCE helpers as necessary while accessing the HFI
queue index variables.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714653/
Message-ID: <20260327-a8xx-gpu-batch2-v2-1-2b53c38d2101@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Yasuaki Torimaru [Wed, 25 Mar 2026 11:46:34 +0000 (20:46 +0900)]
drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata()
msm_ioctl_gem_info_get_metadata() always returns 0 regardless of
errors. When copy_to_user() fails or the user buffer is too small,
the error code stored in ret is ignored because the function
unconditionally returns 0. This causes userspace to believe the
ioctl succeeded when it did not.
Additionally, kmemdup() can return NULL on allocation failure, but
the return value is not checked. This leads to a NULL pointer
dereference in the subsequent copy_to_user() call.
Add the missing NULL check for kmemdup() and return ret instead of 0.
Note that the SET counterpart (msm_ioctl_gem_info_set_metadata)
correctly returns ret.
Fixes: 9902cb999e4e ("drm/msm/gem: Add metadata") Cc: stable@vger.kernel.org Signed-off-by: Yasuaki Torimaru <yasuakitorimaru@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/714478/
Message-ID: <20260325114635.383241-1-yasuakitorimaru@gmail.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Rob Clark [Wed, 25 Mar 2026 18:41:05 +0000 (11:41 -0700)]
drm/msm/shrinker: Fix can_block() logic
The intention here was to allow blocking if DIRECT_RECLAIM or if called
from kswapd and KSWAPD_RECLAIM is set.
Reported by Claude code review: https://lore.gitlab.freedesktop.org/drm-ai-reviews/review-patch9-20260309151119.290217-10-boris.brezillon@collabora.com/ on a panthor patch which had copied similar logic.
Reported-by: Boris Brezillon <boris.brezillon@collabora.com> Fixes: 7860d720a84c ("drm/msm: Fix build break with recent mm tree") Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/714238/
Message-ID: <20260325184106.1259528-1-robin.clark@oss.qualcomm.com>
Rob Clark [Tue, 24 Mar 2026 22:05:17 +0000 (15:05 -0700)]
drm/msm: Disallow foreign mapping of _NO_SHARE
This restriction applies to mapping of _NO_SHARE objs in the kms vm as
well as importing/exporting BOs. Since the DPU has it's own VM, scanout
counts as "exporting" a BO from outside of it's host VM.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/713897/
Message-ID: <20260324220519.1221471-1-robin.clark@oss.qualcomm.com>
Rob Clark [Mon, 16 Mar 2026 18:44:42 +0000 (11:44 -0700)]
drm/msm/vma: Avoid lock in VM_BIND fence signaling path
Use msm_gem_unpin_active(), similar to what is used in the GEM_SUBMIT
path. This avoids needing to hold the obj lock, and the end result is
the same. (As with GEM_SUBMIT, we know the fence isn't signaled yet.)
Reported-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Fixes: 2e6a8a1fe2b2 ("drm/msm: Add VM_BIND ioctl") Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/712230/
Message-ID: <20260316184442.673558-1-robin.clark@oss.qualcomm.com>
Rob Clark [Mon, 16 Mar 2026 18:34:33 +0000 (11:34 -0700)]
drm/msm/adreno: Change chip_id format
The "ipv4-style" %u.%u.%u.%u used to make sense when the chip_id was
simply encoding gen.major.minor.patch. But this hasn't been true for
at least a couple years.
Switch to %08x, which is still easy enough to read for older devices,
and much easier to read with the new scheme.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/712222/
Message-ID: <20260316183436.671482-2-robin.clark@oss.qualcomm.com>
dt-bindings: display/msm/gpu: Drop redundant reg-names in one if:then:
Top-level reg-names defines already proper order for "reg-names" with
minItems: 1, so no need to repeat it again in one of "if:then:" cases.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: David Heidelberg <david@ixit.cz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/707987/
Message-ID: <20260301142033.88851-2-krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Anna Maniscalco [Tue, 10 Feb 2026 16:29:42 +0000 (17:29 +0100)]
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com> Cc: stable@vger.kernel.org
Patchwork: https://patchwork.freedesktop.org/patch/704066/
Message-ID: <20260210-recovery_suspend_fix-v1-1-00ed9013da04@gmail.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/703803/
Message-ID: <20260210014603.1372-2-mailingradian@gmail.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Forbid recover/fault worker to enter memory reclaim (under
gpu->lock) to address this deadlock scenario.
Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/700978/
Message-ID: <20260127073341.2862078-1-senozhatsky@chromium.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Dave Airlie [Tue, 31 Mar 2026 06:38:49 +0000 (16:38 +1000)]
Merge tag 'drm-intel-next-2026-03-30' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v7.1:
Refactoring and cleanups:
- Refactor LT PHY PLL handling to use the DPLL framework (Mika)
- Implement display register polling and waits in display code (Ville)
- Move PCH clock gating in display PCH file (Luca)
- Add shared stepping info header for i915 and display (Jani)
- Clean up GVT I2C command decoding (Jonathan)
- NV12 plane unlinking cleanups (Ville)
- Clean up NV12 DDB/watermark handling for pre-ICL platforms (Ville)
Fixes:
- An assortment of DSI fixes (Ville)
- Handle PORT_NONE in assert_port_valid() (Jonathan)
- Fix link failure without FBDEV emulation (Arnd Bergmann)
- Quirk disable panel replay on certain Dell XPS models (Jouni)
- Check if VESA DPCD AUX backlight is possible (Suraj)
Timur Kristóf [Sun, 29 Mar 2026 16:03:06 +0000 (18:03 +0200)]
drm/amdgpu/uvd4.2: Don't initialize UVD 4.2 when DPM is disabled
UVD 4.2 doesn't work at all when DPM is disabled because
the SMU is responsible for ungating it. So, Linux fails
to boot with CIK GPUs when using the amdgpu.dpm=0 parameter.
Fix this by returning -ENOENT from uvd_v4_2_early_init()
when amdgpu_dpm isn't enabled.
Note: amdgpu.dpm=0 is often suggested as a workaround
for issues and is useful for debugging.
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:05 +0000 (18:03 +0200)]
drm/amd/pm/smu7: Add SCLK cap for quirky Hawaii board
On a specific Radeon R9 390X board, the GPU can "randomly" hang
while gaming. Initially I thought this was a RADV bug and tried
to work around this in Mesa:
commit 8ea08747b86b ("radv: Mitigate GPU hang on Hawaii in Dota 2 and RotTR")
However, I got some feedback from other users who are reporting
that the above mitigation causes a significant performance
regression for them, and they didn't experience the hang on their
GPU in the first place.
After some further investigation, it turns out that the problem
is that the highest SCLK DPM level on this board isn't stable.
Lowering SCLK to 1040 MHz (from 1070 MHz) works around the issue,
and has a negligible impact on performance compared to the Mesa
patch. (Note that increasing the voltage can also work around it,
but we felt that lowering the SCLK is the safer option.)
To solve the above issue, add an "sclk_cap" field to smu7_hwmgr
and set this field for the affected board. The capped SCLK value
correctly appears on the sysfs interface and shows up in GUI
tools such as LACT.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:04 +0000 (18:03 +0200)]
drm/amd/pm/ci: Fill DW8 fields from SMC
In ci_populate_dw8() we currently just read a value from the SMU
and then throw it away. Instead of throwing away the value,
we should use it to fill other fields in DW8 (like radeon).
Otherwise the value of the other fiels is just cleared when
we copy this data to the SMU later.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:03 +0000 (18:03 +0200)]
drm/amd/pm/ci: Clear EnabledForActivity field for memory levels
Follow what radeon did and what amdgpu does for other GPUs with SMU7.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:02 +0000 (18:03 +0200)]
drm/amd/pm/ci: Fix powertune defaults for Hawaii 0x67B0
There is no AMD GPU with the ID 0x66B0, this looks like a typo.
It should be 0x67B0 which is actually part of the PCI ID list,
and should use the Hawaii XT powertune defaults according to
the old radeon driver.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:01 +0000 (18:03 +0200)]
drm/amd/pm/smu7: Remove non-functional SMU7 voltage dependency on DAL
It looks like this was written for an old version of DC (DAL)
and was never adapted afterwards. This was non-functional
because it relied on the "dal_power_level" field which was
never assigned anywhere in the code base.
Also, it was not implemented for CI ASICs.
Now superseded by the newer voltage dependency on display
clock table added by the previous commit, let's remove.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:03:00 +0000 (18:03 +0200)]
drm/amd/pm/smu7: Fix SMU7 voltage dependency on display clock
The DCE (display controller engine) requires a minimum voltage
in order to function correctly, depending on which clock level
it currently uses.
Add a new table that contains display clock frequency levels
and the corresponding required voltages. The clock frequency
levels are taken from DC (and the old radeon driver's voltage
dependency table for CI in cases where its values were lower).
The voltage levels are taken from the following function:
phm_initializa_dynamic_state_adjustment_rule_settings().
Furthermore, in case of CI, call smu7_patch_vddc() on the new
table to account for leakage voltage (like in radeon).
Use the display clock value from amd_pp_display_configuration
to look up the voltage level needed by the DCE. Send the
voltage to the SMU via the PPSMC_MSG_VddC_Request command.
The previous implementation of this feature was non-functional
because it relied on a "dal_power_level" field which was never
assigned; and it was not at all implemented for CI ASICs.
I verified this on a Radeon R9 M380 which previously booted to
a black screen with DC enabled (default since Linux 6.19), but
now works correctly.
Fixes: 599a7e9fe1b6 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:02:59 +0000 (18:02 +0200)]
drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs
There are two known cases where MCLK DPM can causes issues:
Radeon R9 M380 found in iMac computers from 2015.
The SMU in this GPU just hangs as soon as we send it the
PPSMC_MSG_MCLKDPM_Enable command, even when MCLK switching is
disabled, and even when we only populate one MCLK DPM level.
Apply workaround to all devices with the same subsystem ID.
Radeon R7 260X due to old memory controller microcode.
We only flash the MC ucode when it isn't set up by the VBIOS,
therefore there is no way to make sure that it has the correct
ucode version.
I verified that this patch fixes the SMU hang on the R9 M380
which would previously fail to boot. This also fixes the UVD
initialization error on that GPU which happened because the
SMU couldn't ungate the UVD after it hung.
Fixes: 86457c3b21cb ("drm/amd/powerplay: Add support for CI asics to hwmgr") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Sun, 29 Mar 2026 16:02:58 +0000 (18:02 +0200)]
drm/amd/pm/ci: Use highest MCLK on CI when MCLK DPM is disabled
When MCLK DPM is disabled for any reason, populate the MCLK
table with the highest MCLK DPM level, so that the ASIC can
use the highest possible memory clock to get good performance
even when MCLK DPM is disabled.
Fixes: 9f4b35411cfe ("drm/amd/powerplay: add CI asics support to smumgr (v3)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: use multiple entities in amdgpu_move_blit
Thanks to "drm/ttm: rework pipelined eviction fence handling", ttm
can deal correctly with moves and evictions being executed from
different contexts.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Donet Tom [Mon, 23 Mar 2026 04:28:39 +0000 (09:58 +0530)]
drm/amdkfd: Fix queue preemption/eviction failures by aligning control stack size to GPU page size
The control stack size is calculated based on the number of CUs and
waves, and is then aligned to PAGE_SIZE. When the resulting control
stack size is aligned to 64 KB, GPU hangs and queue preemption
failures are observed while running RCCL unit tests on systems with
more than two GPUs.
amdgpu 0048:0f:00.0: amdgpu: Queue preemption failed for queue with
doorbell_id: 80030008
amdgpu 0048:0f:00.0: amdgpu: Failed to evict process queues
amdgpu 0048:0f:00.0: amdgpu: GPU reset begin!. Source: 4
amdgpu 0048:0f:00.0: amdgpu: Queue preemption failed for queue with
doorbell_id: 80030008
amdgpu 0048:0f:00.0: amdgpu: Failed to evict process queues
amdgpu 0048:0f:00.0: amdgpu: Failed to restore process queues
This issue is observed on both 4 KB and 64 KB system page-size
configurations.
This patch fixes the issue by aligning the control stack size to
AMDGPU_GPU_PAGE_SIZE instead of PAGE_SIZE, so the control stack size
will not be 64 KB on systems with a 64 KB page size and queue
preemption works correctly.
Additionally, In the current code, wg_data_size is aligned to PAGE_SIZE,
which can waste memory if the system page size is large. In this patch,
wg_data_size is aligned to AMDGPU_GPU_PAGE_SIZE. The cwsr_size, calculated
from wg_data_size and the control stack size, is aligned to PAGE_SIZE.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: use TTM_NUM_MOVE_FENCES when reserving fences
Use TTM_NUM_MOVE_FENCES as an upperbound of how many fences
ttm might need to deal with moves/evictions.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: round robin through clear_entities in amdgpu_fill_buffer
This makes clear of different BOs run in parallel. Partial jobs to
clear a single BO still execute sequentially.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change for now, as we always allocate a single entity.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Acked-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change for now, as we always allocate a single entity
and use it everywhere.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Fri, 27 Mar 2026 13:46:42 +0000 (09:46 -0400)]
drm/amdkfd: fix kernel crash on releasing NULL sysfs entry
there is an abnormal case that When a process re-opens kfd
with different mm_struct(execve() called by user), the
allocated p->kobj will be freed, but missed setting it to NULL,
that will cause sysfs/kernel crash with NULL pointers in p->kobj
on kfd_process_remove_sysfs() when releasing process, and the
similar error on kfd_procfs_del_queue() as well.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ray Wu [Wed, 17 Dec 2025 08:36:02 +0000 (16:36 +0800)]
drm/amd/display: Add Idle state manager(ISM)
[Why]
Rapid allow/disallow of idle optimization calls, whether it be IPS or
self-refresh features, can end up using more power if actual
time-in-idle is low. It can also spam DMUB command submission in a way
that prevents it from servicing other requestors.
[How]
Introduce the Idle State Manager (ISM) to amdgpu. It maintains a finite
state machine that uses a hysteresis to determine if a delay should be
inserted between a caller allowing idle, and when the actual idle
optimizations are programmed.
A second timer is also introduced to enable static screen optimizations
(SSO) such as PSR1 and Replay low HZ idle mode. Rapid SSO enable/disable
can have a negative power impact on some low hz video playback, and can
introduce user lag for PSR1 (due to up to 3 frames of sync latency).
This effectively rate-limits idle optimizations, based on hysteresis.
This also replaces the existing delay logic used for PSR1, allowing
drm_vblank_crtc_config.disable_immediate = true, and thus allowing
drm_crtc_vblank_restore().
v2:
* Loosen criteria for ISM to exit idle optimizations; it failed to exit
idle correctly on cursor updates when there are no drm_vblank
requestors,
* Document default_ism_config
* Convert pr_debug to trace events to reduce overhead on frequent
codepaths
* checkpatch.pl fixes
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5.4
The Cleaner Shader is responsible for clearing LDS, VGPRs and SGPRs
between GPU workloads to enforce process isolation and avoid data
leakage.
The cleaner shader clears per-wave GPU state (LDS, VGPRs and SGPRs)
between workloads, improving process isolation and preventing stale data
from being observed by subsequent tasks.
This reuses the existing cleaner shader used on GFX11.0.3 and enables it
for GFX11.5.4 GPUs when firmware requirements are met.
Cc: Muhammad Adam <muhammad.adam@amd.com> Cc: Mario Sopena-Novales <mario.novales@amd.com> Cc: Tom Wu <Tom.Wu@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 20 Mar 2026 22:38:34 +0000 (17:38 -0500)]
drm/amd/display: Promote DC to 3.2.376
This version brings along following fixes:
- correct unknown plane state patch
- Revert "Refactor DC update checks"
- Revert "Add 3DLUT DMA broadcast support"
- Remove invalid DPSTREAMCLK mask usage
- enable eDP DSC seamless boot support
- Revert "Rework HDMI link training and YCbCr422 with DSC policy"
- Disable PSR & Replay CRTC disable by default
- Fix Silence Compiler Warnings
- Add link output control for DPIA
- eliminate clock manager code duplication
- Don't set 4to1MPC config dynamically
- Merge pipes for validate
- Fix bounds checking in dml2_0 clock table array
- Avoid turning off the PHY when OTG is running for DVI
- Should support p-state under dcn21
- Enable Replay support for dcn42
- Remove check for DC_DMCUB_ENABLE on DCN42
Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Silence type conversion warnings in dml2
[Why]
Compiler build generates type conversion warnings throughout dc/dml2_0
where values are implicitly narrowed (e.g. int/uint32_t/uint64_t assigned
to uint8_t, unsigned char, char, bool, or dml_bool_t), cluttering build
output and masking genuine issues.
[How]
Add explicit casts at each narrowing assignment with ASSERT guards
to catch out-of-range values in debug builds:
- uint8_t: otg_inst, num_planes, pipe_idx, vblank_index fields
- unsigned char: pipe_dlg_param.otg_inst from tg->inst
- char: mcache num_pipes from num_dpps_required
- bool/dml_bool_t: INTERLACE bitfield and fams2 enable flag use != 0
- uint64_t: widen min_hardware_refresh_in_uhz to hold div64_u64 result,
then cast to unsigned long for min_refresh_uhz with ASSERT
Rafal Ostrowski [Mon, 23 Feb 2026 05:13:32 +0000 (06:13 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 3
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafal Ostrowski [Wed, 18 Feb 2026 15:19:47 +0000 (16:19 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 2
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Removed DC_FP_START and DC_FP_END.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafal Ostrowski [Tue, 24 Feb 2026 14:36:09 +0000 (15:36 +0100)]
drm/amd/display: Move FPU Guards From DML To DC - Part 1
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gangliang Xie [Wed, 18 Mar 2026 08:09:39 +0000 (16:09 +0800)]
drm/amdgpu: add support to query vram info from firmware
add support to query vram info from firmware
v2: change APU vram type, add multi-aid check
v3: seperate vram info query function into 3 parts and
call them in a helper func when requirements
are met.
v4: calculate vram_width for v9.x
DCN4.x hardware does not have DPSTREAMCLK_GATE_DISABLE and
DPSTREAMCLK_ROOT_GATE_DISABLE fields in DCCG_GATE_DISABLE_CNTL3.
These global fields only exist in DCN3.1.x hardware.
[How]
Remove the call that tries to update non-existent fields in CNTL3.
DCN4.x uses per-instance fields in CNTL5 instead,
which are already correctly programmed in the switch cases above.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mohit Bawa [Wed, 5 Nov 2025 18:58:35 +0000 (13:58 -0500)]
drm/amd/display: enable eDP DSC seamless boot support
[Why]
VBIOS supports DSC for seamless boot on newer hardware.
Reading hardware state allows proper DSC validation without breaking
existing boot display.
[What]
Remove DSC block for boot timing validation and implement hardware state
reading to populate DSC configuration from VBIOS-configured state.
Enhance dsc_read_state function in DCN401 to read additional
DSC parameters.
Lincheng Ku [Tue, 17 Mar 2026 19:58:35 +0000 (03:58 +0800)]
drm/amd/dc: Add link output control for DPIA
[Why]
To support specific sequencing requirements for DPIA link output
[How]
Implement the dpia_link_hwss structure and define the necessary
control function pointers. The initialization order is
aligned with the core link_hwss definition to ensure consistency
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Lincheng Ku <LinCheng.Ku@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Silence signed/unsighed mismatch warning in dc
[Why]
Implicit signed-to-unsigned conversions caused compiler
warnings in DC paths.
[How]
Added explicit (unsigned int)/(uint32_t) casts for sentinel -1
assignments and IRQ ~MASK initializers, with small cast alignment
in logging/DPCD code.
Functionality and behavior is unchanged; only type intent is explicit.
[Why]
Clock manager contained significant duplicate code between
variants with identical logic for functions using only SMU
calls or shared registers. This increases maintenance overhead
and potential for bugs.
[How]
Expose clock constants and internal functions in header for
sharing. Remove duplicate implementations and update function
pointers to use shared functions. Refactor remaining
variant-specific functions to use shared constants and helper
functions. Add compatibility comments for hardware differences.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Silence Conversion Warnings in Dmub
Fix Conversion that might result in a loss of data warnings in dmub/src/:
- dmub_dcn20/31/32/35/42/60/401.c: Add ASSERT(value <= 0xFF) and
explicit (uint8_t) cast when storing REG_GET results into uint8_t
debug struct fields. Add != 0 for bool assignments from uint32_t
bitfield reads.
- dmub_reg.c: Cast va_arg shift value to uint8_t with ASSERT guard
before passing to set_reg_field_value_masks().
- dmub_srv.c: Widen num_pending to uint64_t to match uint64_t
arithmetic; use != 0 for bool assignments from unsigned expressions.
Harry Wentland [Fri, 16 Jan 2026 16:47:50 +0000 (11:47 -0500)]
drm/amd/display: Don't set 4to1MPC config dynamically
We were previously modifying the global dc->config.enable_4to1MPC
dynamically. These variables are meant as global configs, not to
by dynamically modified. Modifying them dynamically prevents us
from enabling/disabling functionality for debug purposes and can
easily lead to bad things since we're not operating on the current
state but on DC-wide variables.
Instead we should look at the existing split4mpc decision in
dcn20_validate_apply_split_flags and make the decision there,
if the global config.enable_4to1MPC is set to true for the
DCN version we're running.
This fixes corruption that is observed when running a new IGT
kms_colorop test for color-space-conversion that uses a
YUV plane and outputs to a writeback connector.
Co-developed by Claude Sonnet 4.5.
Assisted-by: Claude:claude-sonnet-4.5 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / linux.git / log
