Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.
Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_master is made, which involves a mutex lock in a future
patch. However, this is illegal because the mutex lock might block
while in the RCU read-side critical section.
Since drm_is_current_master isn't protected by rcu_read_lock, we avoid
this by moving it out of the RCU critical section.
The following report came from intel-gfx ci's
igt@debugfs_test@read_all_entries testcase:
=============================
[ BUG: Invalid wait context ]
5.13.0-CI-Patchwork_20515+ #1 Tainted: G W
-----------------------------
debugfs_test/1101 is trying to lock: ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at:
drm_is_current_master+0x1e/0x50
other info that might help us debug this:
context-{4:4}
3 locks held by debugfs_test/1101:
#0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at:
seq_read_iter+0x53/0x3b0
#1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at:
drm_clients_info+0x63/0x2a0
#2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at:
drm_clients_info+0x1b1/0x2a0
stack backtrace:
CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W
5.13.0-CI-Patchwork_20515+ #1
Hardware name: Intel Corporation CometLake Client Platform/CometLake S
UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019
Call Trace:
dump_stack+0x7f/0xad
__lock_acquire.cold.78+0x2af/0x2ca
lock_acquire+0xd3/0x300
? drm_is_current_master+0x1e/0x50
? __mutex_lock+0x76/0x970
? lockdep_hardirqs_on+0xbf/0x130
__mutex_lock+0xab/0x970
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
drm_is_current_master+0x1e/0x50
drm_clients_info+0x107/0x2a0
seq_read_iter+0x178/0x3b0
seq_read+0x104/0x150
full_proxy_read+0x4e/0x80
vfs_read+0xa5/0x1b0
ksys_read+0x5a/0xd0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
In the smk_access_entry() function, if no matching rule is found
in the rust_list, a negative error code will be used to perform bit
operations with the MAY_ enumeration value. This is semantically
wrong. This patch fixes this issue.
To avoid races between iavf_init_task(), iavf_reset_task(),
iavf_watchdog_task(), iavf_adminq_task() as well as the shutdown and
remove functions more locking is required.
The current protection by __IAVF_IN_CRITICAL_TASK is needed in
additional places.
- The reset task performs state transitions, therefore needs locking.
- The adminq task acts on replies from the PF in
iavf_virtchnl_completion() which may alter the states.
- The init task is not only run during probe but also if a VF gets stuck
to reinitialize it.
- The shutdown function performs a state transition.
- The remove function performs a state transition and also free's
resources.
iavf_lock_timeout() is introduced to avoid waiting infinitely
and cause a deadlock. Rather unlock and print a warning.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The iavf watchdog task overrides adapter->state to __IAVF_RESETTING
when it detects a pending reset. Then schedules iavf_reset_task() which
takes care of the reset.
The reset task is capable of handling the reset without changing
adapter->state. In fact we lose the state information when the watchdog
task prematurely changes the adapter state. This may lead to a crash if
instead of the reset task the iavf_remove() function gets called before
the reset task.
In that case (if we were in state __IAVF_RUNNING previously) the
iavf_remove() function triggers iavf_close() which fails to close the
device because of the incorrect state information.
This may result in a crash due to pending interrupts.
kernel BUG at drivers/pci/msi.c:357!
[...]
Call Trace:
[<ffffffffbddf24dd>] pci_disable_msix+0x3d/0x50
[<ffffffffc08d2a63>] iavf_reset_interrupt_capability+0x23/0x40 [iavf]
[<ffffffffc08d312a>] iavf_remove+0x10a/0x350 [iavf]
[<ffffffffbddd3359>] pci_device_remove+0x39/0xc0
[<ffffffffbdeb492f>] __device_release_driver+0x7f/0xf0
[<ffffffffbdeb49c3>] device_release_driver+0x23/0x30
[<ffffffffbddcabb4>] pci_stop_bus_device+0x84/0xa0
[<ffffffffbddcacc2>] pci_stop_and_remove_bus_device+0x12/0x20
[<ffffffffbddf361f>] pci_iov_remove_virtfn+0xaf/0x160
[<ffffffffbddf3bcc>] sriov_disable+0x3c/0xf0
[<ffffffffbddf3ca3>] pci_disable_sriov+0x23/0x30
[<ffffffffc0667365>] i40e_free_vfs+0x265/0x2d0 [i40e]
[<ffffffffc0667624>] i40e_pci_sriov_configure+0x144/0x1f0 [i40e]
[<ffffffffbddd5307>] sriov_numvfs_store+0x177/0x1d0
Code: 00 00 e8 3c 25 e3 ff 49 c7 86 88 08 00 00 00 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 8b 7b 28 e8 0d 44
RIP [<ffffffffbbbf1068>] free_msi_irqs+0x188/0x190
The solution is to not touch the adapter->state in iavf_watchdog_task()
and let the reset task handle the state transition.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The naming of the regulator is problematic. VCC is usually a supply
voltage whereas these devices have a separate VREF pin.
Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.
In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.
This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.
Note that this will work as above only when MSG_EOR is set in the
flags parameter of recvmsg(), so that it won't break any old user
applications.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Updating the current_state field of struct pci_dev the way it is done
in pci_enable_device_flags() before calling do_pci_enable_device() may
not work. For example, if the given PCI device depends on an ACPI
power resource whose _STA method initially returns 0 ("off"), but the
config space of the PCI device is accessible and the power state
retrieved from the PCI_PM_CTRL register is D0, the current_state
field in the struct pci_dev representing that device will get out of
sync with the power.state of its ACPI companion object and that will
lead to power management issues going forward.
To avoid such issues, make pci_enable_device_flags() call
pci_update_current_state() which takes ACPI device power management
into account, if present, to retrieve the current power state of the
device.
Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The logic at dib8000_get_init_prbs() has a few issues:
1. the tables used there has an extra unused value at the beginning;
2. the dprintk() message doesn't write the right value when
transmission mode is not 8K;
3. the array overflow validation is done by the callers.
On a config (such as arch/sh/) which does not set HAS_DMA when MMU
is not set, several ATMEL ASoC drivers select symbols that cause
kconfig warnings. There is one "depends on HAS_DMA" which is no longer
needed. Dropping it eliminates the kconfig warnings and still builds
with no problems reported.
userfaultfd assumes that the enabled features are set once and never
changed after UFFDIO_API ioctl succeeded.
However, currently, UFFDIO_API can be called concurrently from two
different threads, succeed on both threads and leave userfaultfd's
features in non-deterministic state. Theoretically, other uffd operations
(ioctl's and page-faults) can be dispatched while adversely affected by
such changes of features.
Moreover, the writes to ctx->state and ctx->features are not ordered,
which can - theoretically, again - let userfaultfd_ioctl() think that
userfaultfd API completed, while the features are still not initialized.
To avoid races, it is arguably best to get rid of ctx->state. Since there
are only 2 states, record the API initialization in ctx->features as the
uppermost bit and remove ctx->state.
Link: https://lkml.kernel.org/r/20210808020724.1022515-3-namit@vmware.com Fixes: 9cd75c3cd4c3d ("userfaultfd: non-cooperative: add ability to report non-PF events from uffd descriptor") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit e1a1ef84cd07 ("KVM: PPC: Book3S: Allocate guest TCEs on
demand too"), pages for TCE tables for KVM guests are allocated only
when needed. This allows skipping any update when clearing TCEs. This
works mostly fine as TCE updates are handled when the MMU is enabled.
The realmode handlers fail with H_TOO_HARD when pages are not yet
allocated, except when clearing a TCE in which case KVM prints a warning
and proceeds to dereference a NULL pointer, which crashes the host OS.
This has not been caught so far as the change in commit e1a1ef84cd07 is
reasonably new, and POWER9 runs mostly radix which does not use realmode
handlers. With hash, the default TCE table is memset() by QEMU when the
machine is reset which triggers page faults and the KVM TCE device's
kvm_spapr_tce_fault() handles those with MMU on. And the huge DMA
windows are not cleared by VMs which instead successfully create a DMA
window big enough to map the VM memory 1:1 and then VMs just map
everything without clearing.
This started crashing now as commit 381ceda88c4c ("powerpc/pseries/iommu:
Make use of DDW for indirect mapping") added a mode when a dymanic DMA
window not big enough to map the VM memory 1:1 but it is used anyway,
and the VM now is the first (i.e. not QEMU) to clear a just created
table. Note that upstream QEMU needs to be modified to trigger the VM to
trigger the host OS crash.
This replaces WARN_ON_ONCE_RM() with a check and return, and adds
another warning if TCE is not being cleared.
Pass the ID of changeable parent at registration. This will allow
the scalability of this clock driver with regards to the changeable
parent ID for versions of this IP where changeable parent is not the
last one in the parents list (e.g. SAMA7G5). With this the clock flags
are set to zero in case we have no changeable parent. Also in
clk_generated_best_diff() the *best_diff variable is check against
tmp_diff variable using ">=" operator instead of ">" so that in case
the requested frequency could be obtained using fix parents + gck
dividers but the clock also supports changeable parent to be able
to force the usage of the changeable parent.
The current hash algorithm used for hashing cookie keys is really bad,
producing almost no dispersion (after a test kernel build, ~30000 files
were split over just 18 out of the 32768 hash buckets).
Borrow the full_name_hash() hash function into fscache to do the hashing
for cookie keys and, in the future, volume keys.
I don't want to use full_name_hash() as-is because I want the hash value to
be consistent across arches and over time as the hash value produced may
get used on disk.
I can also optimise parts of it away as the key will always be a padded
array of aligned 32-bit words.
After the L1 saves its PMU SPRs but before loading the L2's PMU SPRs,
switch the pmcregs_in_use field in the L1 lppaca to the value advertised
by the L2 in its VPA. On the way out of the L2, set it back after saving
the L2 PMU registers (if they were in-use).
This transfers the PMU liveness indication between the L1 and L2 at the
points where the registers are not live.
This fixes the nested HV bug for which a workaround was added to the L0
HV by commit 63279eeb7f93a ("KVM: PPC: Book3S HV: Always save guest pmu
for guest capable of nesting"), which explains the problem in detail.
That workaround is no longer required for guests that include this bug
fix.
Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Link: https://lore.kernel.org/r/20210811160134.904987-10-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
A quirk was recently added for Elan devices that has same device match
as an entry earlier in the list. The i2c_hid_lookup_quirk function will
always return the last match in the list, so the new entry shadows the
old entry. The quirk in the previous entry, I2C_HID_QUIRK_BOGUS_IRQ,
silenced a flood of messages which have reappeared in the 5.13 kernel.
This change moves the two quirk flags into the same entry.
Fixes: ca66a6770bd9 (HID: i2c-hid: Skip ELAN power-on command after reset) Signed-off-by: Jim Broadus <jbroadus@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The main target_xcopy_do_work() loop unnecessarily allocates an I/O buffer
with each synchronous READ / WRITE pair. This commit significantly reduces
allocations by reusing the XCOPY I/O buffer when possible.
Link: https://lore.kernel.org/r/20200327141954.955-4-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
CONFIG_MTD_PHYSMAP_OF is not longer enabled as it depends on
MTD_PHYSMAP which is not enabled.
This is a regression from commit 642b1e8dbed7 ("mtd: maps: Merge
physmap_of.c into physmap-core.c"), which added the extra dependency.
Add CONFIG_MTD_PHYSMAP=y so this stays in the config, as Christophe said
it is useful for build coverage.
Fixes: 642b1e8dbed7 ("mtd: maps: Merge physmap_of.c into physmap-core.c") Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210817045407.2445664-3-joel@jms.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver has some left over "return 1" on failure style code mixed with
"return negative error codes" style code. The caller doesn't care so we
should just convert everything to return negative error codes.
Then there was a problem that there were two variables used to store error
codes which just resulted in confusion. If qedf_alloc_bdq() returned a
negative error code, we accidentally returned success instead of
propagating the error code. So get rid of the "rc" variable and use
"status" every where.
Also remove the "status = 0" initialization so that these sorts of bugs
will be detected by the compiler in the future.
Link: https://lore.kernel.org/r/20210810085023.GA23998@kili Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This function had some left over code that returned 1 on error instead
negative error codes. Convert everything to use negative error codes. The
caller treats all non-zero returns the same so this does not affect run
time.
A couple places set "rc" instead of "status" so those error paths ended up
returning success by mistake. Get rid of the "rc" variable and use
"status" everywhere.
Remove the bogus "status = 0" initialization, as a future proofing measure
so the compiler will warn about uninitialized error codes.
Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to link order, dma_debug_init is called before debugfs has a chance
to initialize (via debugfs_init which also happens in the core initcall
stage), so the directories for dma-debug are never created.
Decouple dma_debug_fs_init from dma_debug_init and defer its init until
core_initcall_sync (after debugfs has been initialized) while letting
dma-debug initialization occur as soon as possible to catch any early
mappings, as suggested in [1].
Fixes: 15b28bbcd567 ("dma-debug: move initialization to common code") Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't call printk() when CONFIG_PRINTK is not set.
Fixes the following build errors:
or1k-linux-ld: arch/openrisc/kernel/entry.o: in function `_external_irq_handler':
(.text+0x804): undefined reference to `printk'
(.text+0x804): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `printk'
Fixes: 9d02a4283e9c ("OpenRISC: Boot code") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: openrisc@lists.librecores.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Process A opens the folder, and has been reading without closing it.
During this period, Process B created a file under the folder (occupying
multiple f2fs_dir_entry, exceeding the d.max of the inline dir). After
creation, process A uses the d.max of inline dir to read it again, and
it will read that de->name_len is 0.
And Chao pointed out that w/o inline conversion, the race condition still
can happen as below:
dir_entry1: A
dir_entry2: B
dir_entry3: C
free slot: _
ctx->pos: ^
Thread A is traversing directory,
ctx-pos moves to below position after readdir() by thread A:
AAAABBBB___
^
Then thread B delete dir_entry2, and create dir_entry3.
Thread A calls readdir() to lookup dirents starting from middle
of new dirent slots as below:
AAAACCCCCC_
^
In these scenarios, the file system is not damaged, and it's hard to
avoid it. But we can bypass tagging FSCK flag if:
a) bit_pos (:= ctx->pos % d->max) is non-zero and
b) before bit_pos moves to first valid dir_entry.
Fixes: ddf06b753a85 ("f2fs: fix to trigger fsck if dirent.name_len is zero") Signed-off-by: Yangtao Li <frank.li@vivo.com>
[Chao: clean up description] Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
commit 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
introduces udelay() call without including the linux/delay.h header.
This may happen to work on master but the header that declares the
functionshould be included nonetheless.
Fixes: 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729180103.15578-1-msuchanek@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO")
changes the order of GPIO and pinctrl registration: now pinctrl is
registered before GPIO. That means gpio_chip->ngpio is not set when
samsung_pinctrl_register() called, and one cannot rely on that value
anymore. Use `pin_bank->nr_pins' instead of `pin_bank->gpio_chip.ngpio'
to fix mentioned inconsistency.
Fixes: 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO") Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210730192905.7173-1-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Starting from the beginning of infiniband subsystem, the uverbs char
devices start from 192 as a minor number, see
commit bc38a6abdd5a ("[PATCH] IB uverbs: core implementation").
This patch updates the admin guide documentation to reflect it.
The failure during iw_cm module initialization partially left the system
with unreleased memory and other resources. Rewrite the module init/exit
routines in such way that netlink commands will be opened only after
successful initialization.
It is possible for the primary IPoIB network device associated with any
RDMA device to fail to join certain multicast groups preventing IPv6
neighbor discovery and possibly other network ULPs from working
correctly. The IPv4 broadcast group is not affected as the IPoIB network
device handles joining that multicast group directly.
This is because the primary IPoIB network device uses the pkey at ndex 0
in the associated RDMA device's pkey table. Anytime the pkey value of
index 0 changes, the primary IPoIB network device automatically modifies
it's broadcast address (i.e. /sys/class/net/[ib0]/broadcast), since the
broadcast address includes the pkey value, and then bounces carrier. This
includes initial pkey assignment, such as when the pkey at index 0
transitions from the opa default of invalid (0x0000) to some value such as
the OPA default pkey for Virtual Fabric 0: 0x8001 or when the fabric
manager is restarted with a configuration change causing the pkey at index
0 to change. Many network ULPs are not sensitive to the carrier bounce and
are not expecting the broadcast address to change including the linux IPv6
stack. This problem does not affect IPoIB child network devices as their
pkey value is constant for all time.
To mitigate this issue, change the default pkey in at index 0 to 0x8001 to
cover the predominant case and avoid issues as ipoib comes up and the FM
sweeps.
At some point, ipoib multicast support should automatically fix
non-broadcast addresses as it does with the primary broadcast address.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210715160445.142451.47651.stgit@awfm-01.cornelisnetworks.com Suggested-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SCSI_IOCTL_SEND_COMMAND has been deprecated longer than bsg exists and has
been warning for just as long. More importantly it harcodes SCSI CDBs and
thus will do the wrong thing on non-SCSI bsg nodes.
Link: https://lore.kernel.org/r/20210724072033.1284840-2-hch@lst.de Fixes: aa387cc89567 ("block: add bsg helper library") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is ABBA deadlock of inode lock and cp_rwsem,
reorder locks in f2fs_quota_sync() as below to fix this issue:
- lock inode
- lock cp_rwsem
- lock quota_sem
Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The power supply states of discharging, charging, full, etc, represent
state of charging, not the capacity level of the battery (for which
we have a separate property). Current HID usage tables to not allow
for expressing charging state of the batteries found in generic
styli, so we should simply assume that the battery is discharging
even if current capacity is at 100% when battery strength reporting
is done via HID interface. In fact, we were doing just that before
commit 581c4484769e.
This change helps UIs to not mis-represent fully charged batteries in
styli as being charging/topping-off.
irq_mask and irq_unmask callbacks need to be properly guarded by raw spin
locks as masking/unmasking procedure needs atomic read-modify-write
operation on hardware register.
Link: https://lore.kernel.org/r/20210820155020.3000-1-pali@kernel.org Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Measurements in different conditions showed that aardvark hardware PIO
response can take up to 1.44s. Increase wait timeout from 1ms to 1.5s to
ensure that we do not miss responses from hardware. After 1.44s hardware
returns errors (e.g. Completer abort).
The previous two patches fixed checking for PIO status, so now we can use
it to also catch errors which are reported by hardware after 1.44s.
After applying this patch, kernel can detect and print PIO errors to dmesg:
[ 6.879999] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100004
[ 6.896436] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004
[ 6.913049] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100010
[ 6.929663] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100010
[ 6.953558] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100014
[ 6.970170] advk-pcie d0070000.pcie: Non-posted PIO Response Status: CA, 0xe00 @ 0x100014
[ 6.994328] advk-pcie d0070000.pcie: Posted PIO Response Status: COMP_ERR, 0x804 @ 0x100004
Without this patch kernel prints only a generic error to dmesg:
[ 5.246847] advk-pcie d0070000.pcie: config read/write timed out
Link: https://lore.kernel.org/r/20210722144041.12661-3-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an issue that when PCIe switch is connected to an Armada 3700
board, there will be lots of warnings about PIO errors when reading the
config space. According to Aardvark PIO read and write sequence in HW
specification, the current way to check PIO status has the following
issues:
1) For PIO read operation, it reports the error message, which should be
avoided according to HW specification.
2) For PIO read and write operations, it only checks PIO operation complete
status, which is not enough, and error status should also be checked.
This patch aligns the code with Aardvark PIO read and write sequence in HW
specification on PIO status check and fix the warnings when reading config
space.
[pali: Fix CRS handling when CRSSVE is not enabled]
Link: https://lore.kernel.org/r/20210722144041.12661-2-pali@kernel.org Tested-by: Victor Gu <xigu@marvell.com> Signed-off-by: Evan Wang <xswang@marvell.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Victor Gu <xigu@marvell.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # b1bd5714472c ("PCI: aardvark: Indicate error in 'val' when config read fails") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable PCIe reference clock. There is no remove function that's why
this should be enough for simple operation.
Normally this clock is enabled by default by firmware but there are
usecases where this clock should be enabled by driver itself.
It is also good that PCIe clock is recorded in a clock framework.
Link: https://lore.kernel.org/r/ee6997a08fab582b1c6de05f8be184f3fe8d5357.1624618100.git.michal.simek@xilinx.com Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.
If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.
When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno. But after e4585da22ad0 ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.
Userspace may rely on the ~0 data to detect errors, but after e4585da22ad0,
that would not detect CAP_SYS_ADMIN errors.
Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.
The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported
of 512, but in fact it cannot handle incoming TLPs with payload size of
512.
We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark
and DesignWare), where the issue presents itself as an External Abort.
Bjorn Helgaas says:
Probably ASM1062 reports a Malformed TLP error when it receives a data
payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an
arm64 External Abort. [1]
To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256
bytes, so we set the Max Payload Size of devices that may send TLPs to the
ASM1062 to 256 or less.
Previously we assumed that all Root Ports and Switch Downstream Ports
supported Link Bandwidth Notification. Per spec, this is only required
for Ports supporting Links wider than x1 and/or multiple Link speeds
(PCIe r5.0, sec 7.5.3.6).
Because we assumed all Ports supported it, we tried to set up a Bandwidth
Notification IRQ, which failed for devices that don't support IRQs at all,
which meant pcieport didn't attach to the Port at all.
Check the Link Bandwidth Notification Capability bit and enable the service
only when the Port supports it.
[bhelgaas: commit log] Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Link: https://lore.kernel.org/r/20210512213314.7778-1-stuart.w.hayes@gmail.com Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:
arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.
This just shuts up the warning by disabling the warning flag for this
file.
Tested on Nexus 7 2012 builds.
Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.
But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.
Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.
Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475 Cc: stable@vger.kernel.org Cc: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)
those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.
When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.
vmci_host_unlocked_ioctl
vmci_host_do_alloc_queuepair
vmci_qp_broker_alloc
qp_broker_alloc
qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;
When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.
Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.
Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On systems with many cores using dm-crypt, heavy spinlock contention in
percpu_counter_compare() can be observed when the page allocation limit
for a given device is reached or close to be reached. This is due
to percpu_counter_compare() taking a spinlock to compute an exact
result on potentially many CPUs at the same time.
Switch to non-exact comparison of allocated and allowed pages by using
the value returned by percpu_counter_read_positive() to avoid taking
the percpu_counter spinlock.
This may over/under estimate the actual number of allocated pages by at
most (batch-1) * num_online_cpus().
Currently, batch is bounded by 32. The system on which this issue was
first observed has 256 CPUs and 512GB of RAM. With a 4k page size, this
change may over/under estimate by 31MB. With ~10G (2%) allowed dm-crypt
allocations, this seems an acceptable error. Certainly preferred over
running into the spinlock contention.
This behavior was reproduced on an EC2 c5.24xlarge instance with 96 CPUs
and 192GB RAM as follows, but can be provoked on systems with less CPUs
as well.
* Create 8 dmcrypt devices based on files on a tmpfs
* Create and mount an ext4 filesystem on each crypt devices
* Run stress-ng --hdd 8 within one of above filesystems
Total %system usage collected from sysstat goes to ~35%. Write throughput
on the underlying loop device is ~2GB/s. perf profiling an individual
kworker kcryptd thread shows the following profile, indicating spinlock
contention in percpu_counter_compare():
After applying this patch and running the same test, %system usage is
lowered to ~7% and write throughput on the loop device increases
to ~2.7GB/s. perf report shows mempool_alloc() as ~8% rather than ~62%
in the profile and not hitting the percpu_counter() spinlock anymore.
Suggested-by: DJ Gregor <dj@corelight.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Arne Welzel <arne.welzel@corelight.com> Fixes: 5059353df86e ("dm crypt: limit the number of allocated pages") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading status register can fail in the interrupt handler. In such
case, the regmap_read() will not store anything useful under passed
'val' variable and random stack value will be used to determine type of
interrupt.
Handle the regmap_read() failure to avoid handling interrupt type and
triggering changed power supply event based on random stack value.
Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a request that has a priority level equal to or larger than
IOPRIO_BE_NR, bfq_set_next_ioprio_data() prints a critical warning but
defaults to setting the request new_ioprio field to IOPRIO_BE_NR. This
is not consistent with the warning and the allowed values for priority
levels. Fix this by setting the request new_ioprio field to
IOPRIO_BE_NR - 1, the lowest priority level allowed.
Cc: <stable@vger.kernel.org> Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210811033702.368488-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Then the kernel reports:
WARNING: CPU: 5 PID: 344556 at crypto/rsa-pkcs1pad.c:540
pkcs1pad_verify+0x160/0x190
...
Call Trace:
public_key_verify_signature+0x282/0x380
? software_key_query+0x12d/0x180
? keyctl_pkey_params_get+0xd6/0x130
asymmetric_key_verify_signature+0x66/0x80
keyctl_pkey_verify+0xa5/0x100
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The reason of this issue, in function 'asymmetric_key_verify_signature':
'.digest_size(u8) = params->in_len(u32)' leads overflow of an u8 value,
so use u32 instead of u8 for digest_size field. And reorder struct
public_key_signature, it saves 8 bytes on a 64-bit machine.
Cc: stable@vger.kernel.org Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `compute_indices` and `populate_entries` macros operate on inclusive
bounds, and thus the `map_memory` macro which uses them also operates
on inclusive bounds.
We pass `_end` and `_idmap_text_end` to `map_memory`, but these are
exclusive bounds, and if one of these is sufficiently aligned (as a
result of kernel configuration, physical placement, and KASLR), then:
* In `compute_indices`, the computed `iend` will be in the page/block *after*
the final byte of the intended mapping.
* In `populate_entries`, an unnecessary entry will be created at the end
of each level of table. At the leaf level, this entry will map up to
SWAPPER_BLOCK_SIZE bytes of physical addresses that we did not intend
to map.
As we may map up to SWAPPER_BLOCK_SIZE bytes more than intended, we may
violate the boot protocol and map physical address past the 2MiB-aligned
end address we are permitted to map. As we map these with Normal memory
attributes, this may result in further problems depending on what these
physical addresses correspond to.
The final entry at each level may require an additional table at that
level. As EARLY_ENTRIES() calculates an inclusive bound, we allocate
enough memory for this.
Avoid the extraneous mapping by having map_memory convert the exclusive
end address to an inclusive end address by subtracting one, and do
likewise in EARLY_ENTRIES() when calculating the number of required
tables. For clarity, comments are updated to more clearly document which
boundaries the macros operate on. For consistency with the other
macros, the comments in map_memory are also updated to describe `vstart`
and `vend` as virtual addresses.
Fixes: 0370b31e4845 ("arm64: Extend early page table code to allow for larger kernels") Cc: <stable@vger.kernel.org> # 4.16.x Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210823101253.55567-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.
This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.
While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.
Cc: stable@vger.kernel.org # 5.4 Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Casting a small array of u8 to an unsigned long is *never* OK:
- it does funny thing when the array size is less than that of a long,
as it accesses random places in the stack
- it makes everything even more fun with a BE kernel
Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.
An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.
This patch addresses the following problems:
- priv can never be NULL, so this part of the check is useless
- if the loop ran through the whole list, priv->client is invalid and
it is more appropriate and sufficient to check for the end of
list_for_each_entry loop condition.
Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.
Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.
The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.
Fix that by setting shared_info->max_pfn to the last possible PFN + 1.
Fixes: 98dd166ea3a3c3 ("x86/xen/p2m: hint at the last populated P2M entry") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in
the result buffer. Result buffer has specific format defined in the PAPR
specification. One of the fields is counter offset and width of the
counter data returned.
Counter data are returned in a unsigned char array in big endian byte
order. To get the final counter data, the values must be left shifted
byte at a time. But commit 220a0c609ad17 ("powerpc/perf: Add support for
the hv gpci (get performance counter info) interface") made the shifting
bitwise and also assumed little endian order. Because of that, hcall
counters values are reported incorrectly.
In particular this can lead to counters go backwards which messes up the
counter prev vs now calculation and leads to huge counter value
reporting:
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.
Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)
Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).
Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).
Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.
Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com> Fixes: b2a616676839 ("btrfs: fix rw device counting in __btrfs_free_extra_devids") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use the async_delalloc_pages mechanism to make sure that we've
completed our async work before trying to continue our delalloc
flushing. The reason for this is we need to see any ordered extents
that were created by our delalloc flushing. However we're waking up
before we do the submit work, which is before we create the ordered
extents. This is a pretty wide race window where we could potentially
think there are no ordered extents and thus exit shrink_delalloc
prematurely. Fix this by waking us up after we've done the work to
create ordered extents.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is reported to cause regressions. A proposed fix has been posted,
but it is not in a released kernel yet. So just revert this from the
stable release so that the bug is fixed. If it's really needed we can
add it back in in a future release.
Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.
Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).
Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.
Cc: stable@vger.kernel.org Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.
The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line. With commit ab60368ab6a4 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256
Remove the CRYPTO_MD5 dependency for IMA.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.] Cc: stable@vger.kernel.org # 4.17 Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callers of fuse_writeback_range() assume that the file is ready for
modification by the server in the supplied byte range after the call
returns.
If there's a write that extends the file beyond the end of the supplied
range, then the file needs to be extended to at least the end of the range,
but currently that's not done.
There are at least two cases where this can cause problems:
- copy_file_range() will return short count if the file is not extended
up to end of the source range.
- FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file,
hence the region may not be fully allocated.
Fix by flushing writes from the start of the range up to the end of the
file. This could be optimized if the writes are non-extending, etc, but
it's probably not worth the trouble.
projects / thirdparty / kernel / stable.git / log
