The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.
GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute).
On platforms that support it (in firmware), it is necessary to
describe that link, or Adreno register access will hang the board.
The current settings are functionally identical, *but* due to what is
likely hardcoded security policies, the secure firmware rejects them,
resulting in the board hanging. To avoid that, alter the settings such
that SID 0 and 1 are described separately.
Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
warnings:
sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property
sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'interrupts-extended' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The default for the QCM2290 platform that this board is based on is OTG
mode, however the role detection logic is not hooked up for this board
and the dwc3 driver is configured to not allow role switching from
userspace.
Force this board to host mode as this is the preferred usecase until we
get role switching hooked up.
In fnic_init_module() exists redundant check for return value from
fnic_debugfs_init(), because at moment it only can return zero. It make
sense to process theoretical vmalloc() failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9730ddfb123d ("scsi: fnic: remove redundant assignment of variable rc") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Link: https://lore.kernel.org/r/20231128111008.2280507-1-artem.chernyshev@red-soft.ru Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When register is spilled onto a stack as a 1/2/4-byte register, we set
slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it,
depending on actual spill size). So to check if some stack slot has
spilled register we need to consult slot_type[7], not slot_type[0].
To avoid the need to remember and double-check this in the future, just
use is_spilled_reg() helper.
Fixes: 27113c59b6d0 ("bpf: Check the other end of slot_type for STACK_SPILL") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231205184248.1502704-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.
Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map.
map is the pointer of outer map, and need_defer needs some explanation.
need_defer tells the implementation to defer the reference release of
the passed element and ensure that the element is still alive before
the bpf program, which may manipulate it, exits.
The following three cases will invoke map_fd_put_ptr() and different
need_defer values will be passed to these callers:
1) release the reference of the old element in the map during map update
or map deletion. The release must be deferred, otherwise the bpf
program may incur use-after-free problem, so need_defer needs to be
true.
2) release the reference of the to-be-added element in the error path of
map update. The to-be-added element is not visible to any bpf
program, so it is OK to pass false for need_defer parameter.
3) release the references of all elements in the map during map release.
Any bpf program which has access to the map must have been exited and
released, so need_defer=false will be OK.
These two parameters will be used by the following patches to fix the
potential use-after-free problem for map-in-map.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20231106144335.v2.7.I1c8ab71570f6906fd020decb80675f05fbe1fe74@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes: 09b701b89a76 ("arm64: dts: qcom: sa8775p: add the watchdog node") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20231106144335.v2.6.I909b7c4453d7b7fb0db4b6e49aa21666279d827d@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
On sc7180 when the watchdog timer fires your logs get filled with:
watchdog0: pretimeout event
watchdog0: pretimeout event
watchdog0: pretimeout event
...
watchdog0: pretimeout event
If you're using console-ramoops to debug crashes the above gets quite
annoying since it blows away any other log messages that might have
been there.
The issue is that the "bark" interrupt (AKA the "pretimeout"
interrupt) remains high until the watchdog is pet. Since we've got
things configured as "level" triggered we'll keep getting interrupted
over and over.
Let's switch to edge triggered. Now we'll get one interrupt when the
"bark" interrupt goes off and won't get another one until the "bark"
interrupt is cleared and asserts again.
This matches how many older Qualcomm SoCs have things configured.
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
Fixes: 14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS") Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231129140537.161720-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hall sensor interrupt on the Primus is active low, which means that
with the current configuration the device attempts to suspend when the
LID is open.
Fix the polarity of the HALL_INT GPIO to avoid this.
This link got broken by commit e790a4ce5290 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes: e790a4ce5290 ("arm: docs: Move Arm documentation to Documentation/arch/") Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Given verifier checks actual value, r0 has to be precise, so we need to
propagate precision properly. r0 also has to be marked as read,
otherwise subsequent state comparisons will ignore such register as
unimportant and precision won't really help here.
xdp_synproxy_kern.c is a BPF program that generates SYN cookies on
allowed TCP ports and sends SYNACKs to clients, accelerating synproxy
iptables module.
Fix the bitmask operation when checking the status of an existing
conntrack entry within tcp_lookup() function. Do not AND with the bit
position number, but with the bitmask value to check whether the entry
found has the IPS_CONFIRMED flag set.
Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes
with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth
combo card. The error he observed is identical to what has been fixed
in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST
bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem.
Lukas found that disabling or limiting RX aggregation works around the
problem for some time (but does not fully fix it). In the following
discussion a few key topics have been discussed which have an impact on
this problem:
- The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller
which prevents DMA transfers. Instead all transfers need to go through
the controller SRAM which limits transfers to 1536 bytes
- rtw88 chips don't split incoming (RX) packets, so if a big packet is
received this is forwarded to the host in it's original form
- rtw88 chips can do RX aggregation, meaning more multiple incoming
packets can be pulled by the host from the card with one MMC/SDIO
transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH
register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will
be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation
and BIT_EN_PRE_CALC makes the chip honor the limits more effectively)
Use multiple consecutive reads in rtw_sdio_read_port() and limit the
number of bytes which are copied by the host from the card in one
MMC/SDIO transfer. This allows receiving a buffer that's larger than
the hosts max_req_size (number of bytes which can be transferred in
one MMC/SDIO transfer). As a result of this the skb_over_panic error
is gone as the rtw88 driver is now able to receive more than 1536 bytes
from the card (either because the incoming packet is larger than that
or because multiple packets have been aggregated).
In case of an receive errors (-EILSEQ has been observed by Lukas) we
need to drain the remaining data from the card's buffer, otherwise the
card will return corrupt data for the next rtw_sdio_read_port() call.
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets") Reported-by: Lukas F. Hartmann <lukas@mntre.com> Closes: https://lore.kernel.org/linux-wireless/CAFBinCBaXtebixKbjkWKW_WXc5k=NdGNaGUjVE8NCPNxOhsb2g@mail.gmail.com/ Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Reported-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231120115726.1569323-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
DSS irq trigger type is set to IRQ_TYPE_EDGE_RISING in the DT file, but
the TRM says it is level triggered.
For some reason triggering on rising edge results in double the amount
of expected interrupts, e.g. for normal page flipping test the number of
interrupts per second is 2 * fps. It is as if the IRQ triggers on both
edges. There are no other side effects to this issue than slightly
increased CPU & power consumption due to the extra interrupt.
Switching to IRQ_TYPE_LEVEL_HIGH is correct and fixes the issue, so
let's do that.
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49:
The result of the left shift is undefined due to shifting by '32',
which is greater or equal to the width of type 'u32'.
[core.UndefinedBinaryOperatorResult]
If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined.[1][2]
For example, when using different gcc's compilation optimization options
(-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the
other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s
return value less than 32 to fix this problem. Warn if bitmask is zero.
When the core rfkill config throws error, it should free the
allocated resources. Currently it is not freeing the core pdev
create resources. Avoid this issue by calling the core pdev
destroy in the error handler of core rfkill config.
Found this issue in the code review and it is compile tested only.
Fixes: 004ccbc0dd49 ("wifi: ath12k: add support for hardware rfkill for WCN7850") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231111040107.18708-1-quic_periyasa@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/scsi/bfa/bfad_bsg.c:2553:50: sparse: sparse: incorrect type in initializer (different base types)
Fixes: 2e5a6c3baccd ("scsi: bfa: Convert bfad_reset_sdev_bflags() from a macro into a function") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311031255.lmSPisIk-lkp@intel.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20231115193338.2261972-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The netlink interface for major and minor version numbers doesn't actually
return the major and minor version numbers.
It reports a u32 that contains the (major, minor, update, alpha1)
components as the major version number, and then alpha2 as the minor
version number.
For whatever reason, the u32 byte order was reversed (ntohl): maybe it was
assumed that the encoded value was a single big-endian u32, and alpha2 was
the minor version.
The correct way to get the supported NC-SI version from the network
controller is to parse the Get Version ID response as described in 8.4.44
of the NC-SI spec[1].
The major, minor, and update fields are all binary-coded decimal (BCD)
encoded [2]. The spec provides examples below the Get Version ID response
format in section 8.4.44.1, but for practical purposes, this is an example
from a live network card:
"f" in the upper-nibble means to ignore it, contributing zero.
If both nibbles are "f", I think the whole field is supposed to be ignored.
Major and minor are "required", meaning they're not supposed to be "ff",
but the update field is "optional" so I think it can be ff. I think the
simplest thing to do is just set the major and minor to zero instead of
juggling some conditional logic or something.
bcd2bin() from "include/linux/bcd.h" seems to assume both nibbles are 0-9,
so I've provided a custom BCD decoding function.
Alpha1 and alpha2 are ISO/IEC 8859-1 encoded, which just means ASCII
characters as far as I can tell, although the full encoding table for
non-alphabetic characters is slightly different (I think).
I imagine the alpha fields are just supposed to be alphabetic characters,
but I haven't seen any network cards actually report a non-zero value for
either.
If people wrote software against this netlink behavior, and were parsing
the major and minor versions themselves from the u32, then this would
definitely break their code.
Signed-off-by: Peter Delevoryas <peter@pjd.dev> Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch called out a warning for null checking a ptr that is assigned by
list_entry(). list_entry() does not return null and, if the list is empty,
can return an invalid ptr. Thus, the !psrp check does not execute properly.
drivers/scsi/lpfc/lpfc_els.c:2133 lpfc_cmpl_els_plogi()
warn: list_entry() does not return NULL 'prsp'
Replace list_entry() with list_get_first(), which does a list_empty() check
before returning the first entry.
Fixes: a3c3c0a806f1 ("scsi: lpfc: Validate ELS LS_ACC completion payload") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-scsi/01b7568f-4ab4-4d56-bfa6-9ecc5fc261fe@moroto.mountain/ Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20231031191224.150862-4-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The XOADC is present at the address 0x197 rather than just 197. It
doesn't change a lot (since the driver hardcodes all register
addresses), but the DT should present correct address anyway.
Fixes: c4b70883ee33 ("ARM: dts: add XOADC and IIO HWMON to APQ8064") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we already have gotten the rproc_handle (meaning the "qcom,rproc"
property is defined in the devicetree), it's a valid state that the
remoteproc module hasn't probed yet so we should defer probing instead
of just failing to probe.
This resolves a race condition when the ath11k driver probes and fails
before the wpss remoteproc driver has probed, like the following:
[ 6.232360] ath11k 17a10040.wifi: failed to get rproc
[ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22
[ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22
...
[ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available
[ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc
[ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188
So, defer the probe if we hit that so we can retry later once the wpss
remoteproc is available.
Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.
This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.
It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.
Refcounted local kptrs are kptrs to user-defined types with a
bpf_refcount field. Recent commits ([0], [1]) modified the lifetime of
refcounted local kptrs such that the underlying memory is not reused
until RCU grace period has elapsed.
Separately, verification of bpf_refcount_acquire calls currently
succeeds for MAYBE_NULL non-owning reference input, which is a problem
as bpf_refcount_acquire_impl has no handling for this case.
This patch takes advantage of aforementioned lifetime changes to tag
bpf_refcount_acquire_impl kfunc KF_RCU, thereby preventing MAYBE_NULL
input to the kfunc. The KF_RCU flag applies to all kfunc params; it's
fine for it to apply to the void *meta__ign param as that's populated by
the verifier and is tagged __ign regardless.
[0]: commit 7e26cd12ad1c ("bpf: Use bpf_mem_free_rcu when
bpf_obj_dropping refcounted nodes") is the actual change to
allocation behaivor
[1]: commit 0816b8c6bf7f ("bpf: Consider non-owning refs to refcounted
nodes RCU protected") modified verifier understanding of
refcounted local kptrs to match [0]'s changes
When looking up an element in LPM trie, the condition 'matchlen ==
trie->max_prefixlen' will never return true, if key->prefixlen is larger
than trie->max_prefixlen. Consequently all elements in the LPM trie will
be visited and no element is returned in the end.
To resolve this, check key->prefixlen first before walking the LPM trie.
The broadcast packets will be filtered in the FIF_ALLMULTI flag in
the original code, which causes beacon packets to be filtered out
and disconnection. Therefore, we fix it.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231103020851.102238-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The rb2 only has a single USB controller, it can be switched between a
type-c port and an internal USB hub via a DIP switch. Until dynamic
role switching is available it's preferable to put the USB controller
in host mode so that the type-A ports and ethernet are available.
Commit 656e9007ef58 ("asm-generic: avoid __generic_cmpxchg_local
warnings") introduced a typo that means the code is incorrect for 32 bit
values. It will work fine for postive numbers, but will fail for
negative numbers on a system where longs are 64 bit.
After commit 59464b262ff5 ("SUNRPC: SOFTCONN tasks should time out when on
the sending list"), any 4.1 backchannel tasks placed on the sending queue
would immediately return with -ETIMEDOUT since their req timers are zero.
Initialize the backchannel's rpc_rqst timeout parameters from the xprt's
default timeout settings.
Fixes: 59464b262ff5 ("SUNRPC: SOFTCONN tasks should time out when on the sending list") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of relying on the value of the 'bytes_left' field, we should
calculate the layout size based on the offset of the request that is
being written out.
Reported-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Fixes: 954998b60caa ("NFS: Fix error handling for O_DIRECT write scheduling") Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the logic for picking current transport entry.
Fixes: 95d0d30c66b8 ("SUNRPC create an iterator to list only OFFLINE xprts") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once the client has processed the CB_LAYOUTRECALL, but has not yet
successfully returned the layout, the server is supposed to switch to
returning NFS4ERR_RETURNCONFLICT. This patch ensures that we handle
that return value correctly.
The subjective cred (task->cred) can potentially be overridden and
subsquently freed in non-RCU context, which could lead to a panic if we
try to use it in cred_fscmp(). Use __task_cred(), which returns the
objective cred (task->real_cred) instead.
Fixes: 0eb43812c027 ("NFS: Clear the file access cache upon login") Fixes: 5e9a7b9c2ea1 ("NFS: Fix up a sparse warning") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error path for blocklayout's device lookup is missing a reference drop
for the case where a lookup finds the device, but the device is marked with
NFS_DEVICEID_UNAVAILABLE.
Fixes: b3dce6a2f060 ("pnfs/blocklayout: handle transient devices") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The arch_jump_label_transform_static() function in csky was originally meant to
override the generic __weak function, but that got changed to an #ifndef check.
This showed up as a missing-prototype warning:
arch/csky/kernel/jump_label.c:43:6: error: no previous prototype for 'arch_jump_label_transform_static' [-Werror=missing-prototypes]
Change the method to use the new method of having a #define and a prototype
for the global function.
Fixes: 7e6b9db27de9 ("jump_label: make initial NOP patching the special case") Fixes: 4e8bb4ba5a55 ("csky: Add jump-label implementation") Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).
When testing sahara sha256 speed performance with tcrypt (mode=404) on
imx53-qsrb board, multiple "Invalid numbers of src SG." errors are
reported. This was traced to sahara_walk_and_recalc() resizing req->src
and causing the subsequent dma_map_sg() call to fail.
Now that the previous commit fixed sahara_sha_hw_links_create() to take
into account the actual request size, rather than relying on sg->length
values, the resize operation is no longer necessary.
Therefore, remove sahara_walk_and_recalc() and simplify associated logic.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's not always the case that the entire sg entry needs to be processed.
Currently, when nbytes is less than sg->length, "Descriptor length" errors
are encountered.
To fix this, take the actual request size into account when populating the
hw links.
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Factor out duplicated skcipher fallback handling code to a helper function
sahara_aes_fallback(). Also, keep a single check if fallback is required in
sahara_aes_crypt().
This patch fixes to set the type 4 format ops in case of table_open4().
It got accidentially changed by commit 541adb0d4d10 ("fs: dlm: debugfs
for queued callbacks") and since them toss debug dumps the same format
as format 5 that are the queued ast callbacks for lkbs.
Fixes: 541adb0d4d10 ("fs: dlm: debugfs for queued callbacks") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Analysis]
When the task exits, it will execute cleanup_mnt() to recycle the mounted gfs2
file system, but it performs a system call fsconfig(4, FSCONFIG_CMD_RECONFIGURE,
NULL, NULL, 0) before executing the task exit operation.
This will execute the following kernel path to complete the setting of
SDF_JOURNAL_LIVE for sd_flags:
[Fix]
Add SDF_NORECOVERY check in gfs2_quota_cleanup() to avoid checking
SDF_JOURNAL_LIVE on the path where gfs2 is being unmounted.
Reported-and-tested-by: syzbot+3b6e67ac2b646da57862@syzkaller.appspotmail.com Fixes: f66af88e3321 ("gfs2: Stop using gfs2_make_fs_ro for withdraw") Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller has reported a NULL pointer dereference when accessing
rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating
rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in
gfs2_rgrp_dump() to prevent that.
Reported-and-tested-by: syzbot+da0fc229cc1ff4bb2e6d@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=da0fc229cc1ff4bb2e6d Fixes: 72244b6bc752 ("gfs2: improve debug information when lvb mismatches are found") Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We already communicate to filesystems when a remount request comes from
the old mount API as some filesystems choose to implement different
behavior in the new mount API than the old mount API to e.g., take the
chance to fix significant API bugs. Allow the same for regular mount
requests.
Fixes: b330966f79fb ("fuse: reject options on reconfigure via fsconfig(2)") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In persistent_ram_init_ecc(), on 64-bit arches DIV_ROUND_UP() will return
64-bit value since persistent_ram_zone::buffer_size has type size_t which
is derived from the 64-bit *unsigned long*, while the ecc_blocks variable
this value gets assigned to has (always 32-bit) *int* type. Even if that
value fits into *int* type, an overflow is still possible when calculating
the size_t typed ecc_total variable further below since there's no cast to
any 64-bit type before multiplication. Declaring the ecc_blocks variable
as *size_t* should fix this mess...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.
Fixes: db700974b69d ("crypto: hisilicon/zip - support zip capability") Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pre-store the valid value of the sec alg support related capability
register in sec_qm_init(), which will be called by probe process.
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: 921715b6b782 ("crypto: hisilicon/sec - get algorithm bitmap from registers") Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pre-store the valid value of hpre alg support related capability
register in hpre_qm_init(), which will be called by hpre_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: f214d59a0603 ("crypto: hisilicon/hpre - support hpre capability") Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.
Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: cf8b5156bbc8 ("crypto: hisilicon/hpre - save capability registers in probe process") Signed-off-by: Sasha Levin <sashal@kernel.org>
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers") Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's not always the case that the entire sg entry needs to be processed.
Currently, when cryptlen is less than sg->legth, "Descriptor length" errors
are encountered.
The error was noticed when testing xts(sahara-ecb-aes) with arbitrary sized
input data. To fix this, take the actual request size into account when
populating the hw links.
update() calls should not modify the result buffer, so add an additional
check for "rctx->last" to make sure that only the final hash value is
copied into the buffer.
Fixes the following selftest failure:
alg: ahash: sahara-sha256 update() used result buffer on test vector 3,
cfg="init+update+final aligned buffer"
Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel crypto API requires that all CBC implementations update the IV
buffer to contain the last ciphertext block.
This fixes the following cbc selftest error:
alg: skcipher: sahara-cbc-aes encryption test failed (wrong output IV) on
test vector 0, cfg="in-place (one sglist)"
Remove the FLAGS_NEW_KEY logic as it has the following issues:
- the wrong key may end up being used when there are multiple data streams:
t1 t2
setkey()
encrypt()
setkey()
encrypt()
encrypt() <--- key from t2 is used
- switching between encryption and decryption with the same key is not
possible, as the hdr flags are only updated when a new setkey() is
performed
With this change, the key is always sent along with the cryptdata when
performing encryption/decryption operations.
Macro dma_map_sg() may return 0 on error. This patch enables
checks in case of the macro failure and ensures unmapping of
previously mapped buffers with dma_unmap_sg().
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 49186a7d9e46 ("crypto: inside_secure - Avoid dma map if size is zero") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a possibility that the function adf_devmgr_pci_to_accel_dev()
might return a NULL pointer.
Add a NULL pointer check in the function rp2srv_show().
Fixes: dbc8876dd873 ("crypto: qat - add rp2svc sysfs attribute") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Reviewed-by: David Guckian <david.guckian@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the function validate_user_input() returns an error, the error path
attempts to unlock an unacquired mutex.
Acquire the mutex before calling validate_user_input(). This is not
strictly necessary but simplifies the code.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The input argument `sla_in` is a pointer to a structure that contains
the parameters of the SLA which is being added or updated.
If this pointer is NULL, the function should return an error as
the data required for the algorithm is not available.
By mistake, the logic jumps to the error path which dereferences
the pointer.
This results in a warnings reported by the static analyzer Smatch when
executed without a database:
drivers/crypto/intel/qat/qat_common/adf_rl.c:871 add_update_sla()
error: we previously assumed 'sla_in' could be null (see line 812)
This issue was not found in internal testing as the pointer cannot be
NULL. The function add_update_sla() is only called (indirectly) by
the rate limiting sysfs interface implementation in adf_sysfs_rl.c
which ensures that the data structure is allocated and valid. This is
also proven by the fact that Smatch executed with a database does not
report such error.
Fix it by returning with error if the pointer `sla_in` is NULL.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Having multiple in-flight AIO requests results in unpredictable
output because they all share the same IV. Fix this by only allowing
one request at a time.
Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to algif_aead") Fixes: a596999b7ddf ("crypto: algif - change algif_skcipher to be asynchronous") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
When dma_map_single() fails, wa->address is supposed to be freed
by the callers of ccp_init_dm_workarea() through ccp_dm_free().
However, many of the call spots don't expect to have to call
ccp_dm_free() on failure of ccp_init_dm_workarea(), which may
lead to a memleak. Let's free wa->address in ccp_init_dm_workarea()
when dma_map_single() fails.
Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x2d/0x50
adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
adf_rl_stop+0x2d/0xb0 [intel_qat]
adf_dev_stop+0x33/0x1d0 [intel_qat]
adf_dev_down+0xf1/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
The qat_ras sysfs attribute group is registered within the
adf_dev_start() function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_ras attribute group was successful or not.
In cases where this condition is encountered, an error similar to
the following might be reported:
4xxx 0000:6b:00.0: Starting device qat_dev0
4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
4xxx 0000:6b:00.0: Failed to send init message
4xxx 0000:6b:00.0: Failed to start device qat_dev0
sysfs group 'qat_ras' not found for kobject '0000:6b:00.0'
...
sysfs_remove_groups+0x29/0x50
adf_sysfs_stop_ras+0x4b/0x80 [intel_qat]
adf_dev_stop+0x43/0x1d0 [intel_qat]
adf_dev_down+0x4b/0x150 [intel_qat]
...
4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
4xxx 0000:6b:00.0: Resetting device qat_dev0
To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.
Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.
This fixes list_add corruption error when the driver is returned
with -EPROBE_DEFER. It is also required to roll back the previous
probe sequences in case of deferred_probe. So, this removes
'err_probe_defer" goto label and just use err_dma_init instead.
Fixes: 42ef0e944b01 ("crypto: starfive - Add crypto engine support") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "ring" variable has an upper bounds check but nothing checks for
negatives. This code uses kstrtouint() already and it was obviously
intended to be declared as unsigned int. Make it so.
Fixes: dbc8876dd873 ("crypto: qat - add rp2svc sysfs attribute") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
