The function divides number of online CPUs by num_core_siblings, and
later checks the divider by zero. This implies a possibility to get
and divide-by-zero runtime error. Fix it by moving the check prior to
division. This also helps to save one indentation level.
DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and
there are at least two periods.
When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and
SxM1AR), indicated by the SxSCR.CT bit (Current Target).
There is no need to update the next memory address if two periods are
configured, as SxM0AR and SxM1AR are already properly set up before the
transfer begins in the stm32_dma_start_transfer() function.
This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing
potential Transfer Errors. Specifically, when the channel is enabled,
SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0,
respectively. Otherwise, a Transfer Error interrupt is triggered, and the
stream is automatically disabled.
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this
two line warning is printed each time the pipeline is started. Reduce
this excessive logging by only warning once for the missing control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Proper clock configuration is required to advance through FSM states.
Prior than this having a different clock value than default sensor's
value was used (12 MHz) could prevent the sensor from booting.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Probing peripherals in the AON and PERI domains, such as the PVT thermal
sensor and the PWM controller, can lead to boot hangs or unresponsive
devices on the LPi4A board. The root cause is that their parent bus
clocks ('CLK_CPU2AON_X2H' and the 'CLK_PERISYS_APB' clocks) are
automatically gated by the kernel's power-saving mechanisms when the bus
is perceived as idle.
Alternative solutions were investigated, including modeling the parent
bus in the Device Tree with 'simple-pm-bus' or refactoring the clock
driver's parentage. The 'simple-pm-bus' approach is not viable due to
the lack of defined bus address ranges in the hardware manual and its
creation of improper dependencies on the 'pm_runtime' API for consumer
drivers.
Therefore, applying the'`CLK_IGNORE_UNUSED' flag directly to the
essential bus clocks is the most direct and targeted fix. This prevents
the kernel from auto-gating these buses and ensures peripherals remain
accessible.
This change fixes the boot hang associated with the PVT sensor and
resolves the functional issues with the PWM controller.
Firmware attach DATACORRUPT/DROP buffer flags for the frames which
needs to be dropped, handle it by setting VB2_BUF_STATE_ERROR for these
buffers before calling buf_done.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
request_mem_region() will return NULL instead of error code
when the memory request fails. Therefore, we should check if
the return value is non-zero instead of less than zero. In
this way, this patch also fixes the build warnings:
arch/mips/lantiq/falcon/sysctrl.c:214:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
214 | res_status.name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:216:47: error: ordered comparison of pointer with integer zero [-Werror=extra]
216 | res_ebu.name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:219:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
219 | res_sys[0].name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:222:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
222 | res_sys[1].name) < 0) ||
| ^
arch/mips/lantiq/falcon/sysctrl.c:225:50: error: ordered comparison of pointer with integer zero [-Werror=extra]
225 | res_sys[2].name) < 0))
|
Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Not all tasks have an ABI associated or vDSO mapped,
for example kthreads never do.
If such a task ever ends up calling stack_top(), it will derefence the
NULL ABI pointer and crash.
The intermediary value was included in the wrong
hash state. While there, adapt to user-space by
setting the timestamp to 0 if stuck and inserting
the values nevertheless.
Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Markus Theil <theil.markus@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
probe() requests the reset GPIO to be set to high when getting it.
Immeditately after this hi556_resume() is called and sets the GPIO low.
If the GPIO was low before requesting it this will result in the GPIO
only very briefly spiking high and the sensor not being properly reset.
The same problem also happens on back to back runtime suspend + resume.
Fix this by adding a sleep of 2 ms in hi556_resume() before setting
the GPIO low (if there is a reset GPIO).
The final sleep is kept unconditional, because if there is e.g. no reset
GPIO but a controllable clock then the sensor also needs some time after
enabling the clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted.
The reproducer builds a corrupted file on disk with a negative i_size value.
Add a check when opening this file to avoid subsequent operation failures.
Reported-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=630f6d40b3ccabc8e96e Tested-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fileset value of the inode copy from the disk by the reproducer is
AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its
inode pages are not truncated. This causes the bugon to be triggered when
executing clear_inode() because nrpages is greater than 0.
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
In environments with a page size of 64KB, the maximum size of a folio
can reach up to 128MB. Consequently, during the write-back of folios,
the 'rsv_blocks' will be overestimated to 1,577, which can make
pressure on the journal space where the journal is small. This can
easily exceed the limit of a single transaction. Besides, an excessively
large folio is meaningless and will instead increase the overhead of
traversing the bhs within the folio. Therefore, limit the maximum order
of a folio to 2048 filesystem blocks.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Joseph Qi <jiangqi903@gmail.com> Closes: https://lore.kernel.org/linux-ext4/CA+G9fYsyYQ3ZL4xaSg1-Tt5Evto7Zd+hgNWZEa9cQLbahA1+xg@mail.gmail.com/ Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250707140814.542883-12-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver probes with the invalid timeout value when
'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In
this case, when executing "wdctl", we may get:
The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and
the timeleft value is calculated from the register value we actually read
(0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10).
Add error handling to return the failure code if 'iTCO_wdt_set_timeout()'
fails, ensuring the driver probe fails and prevents invalid operation.
These functions are exported but their prototypes are not defined.
This patch adds the missing function prototypes to fix the following
compilation warnings:
arch/mips/kernel/vpe-mt.c:180:7: error: no previous prototype for 'vpe_alloc' [-Werror=missing-prototypes]
180 | void *vpe_alloc(void)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:198:5: error: no previous prototype for 'vpe_start' [-Werror=missing-prototypes]
198 | int vpe_start(void *vpe, unsigned long start)
| ^~~~~~~~~
arch/mips/kernel/vpe-mt.c:208:5: error: no previous prototype for 'vpe_stop' [-Werror=missing-prototypes]
208 | int vpe_stop(void *vpe)
| ^~~~~~~~
arch/mips/kernel/vpe-mt.c:229:5: error: no previous prototype for 'vpe_free' [-Werror=missing-prototypes]
229 | int vpe_free(void *vpe)
| ^~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prevent the PWM value from being set to minimum when thermal zone
temperature exceeds any trip point during driver probe. Otherwise, the
PWM fan speed will remains at minimum speed and not respond to
temperature changes.
The Synopsys Watchdog driver sets the default timeout to 30 seconds,
but on some devices this is not a valid timeout. E.g. on RK3588 the
actual timeout being used is 44 seconds instead.
Once the watchdog is started the value is updated accordingly, but
it would be better to expose a sensible timeout to userspace without
the need to first start the watchdog.
sprintf() is discouraged for use with bounded destination buffers
as it does not prevent buffer overflows when the formatted output
exceeds the destination buffer size. snprintf() is a safer
alternative as it limits the number of bytes written and ensures
NUL-termination.
Replace sprintf() with snprintf() for copying the debug string
into a temporary buffer, using ORANGEFS_MAX_DEBUG_STRING_LEN as
the maximum size to ensure safe formatting and prevent memory
corruption in edge cases.
EDIT: After this patch sat on linux-next for a few days, Dan
Carpenter saw it and suggested that I use scnprintf instead of
snprintf. I made the change and retested.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Signed-off-by: Showrya M N <showrya@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current code enables only Lane 0 because pwr_cnt will be incremented on
first call to the function. Let's reorder the enablement code to enable
all 4 lanes through GRF.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Valmantas Paliksa <walmis@gmail.com> Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/16b610aab34e069fd31d9f57260c10df2a968f80.1751322015.git.geraldogabriel@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pcie_conf is used to touch TEST_WRITE strobe signal. This signal should
be enabled, a little time waited, and then disabled. Current code clearly
was copy-pasted and never disables the strobe signal. Adjust the define.
While at it, remove PHY_CFG_RD_MASK which has been unused since 64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function").
On newer boards featuring the A523 SoC, the AXP323 (related to the
AXP313) is paired with the AXP717 and serves as a secondary PMIC
providing additional regulator outputs. However the MFD cells are all
registered with PLATFORM_DEVID_NONE, which causes the regulator cells
to conflict with each other.
Commit e37ec3218870 ("mfd: axp20x: Allow multiple regulators") attempted
to fix this by switching to PLATFORM_DEVID_AUTO so that the device names
would all be different, however that broke IIO channel mapping, which is
also tied to the device names. As a result the change was later reverted.
Instead, here we attempt to make sure the AXP313/AXP323 regulator cell
does not conflict by explicitly giving it an ID number. This was
previously done for the AXP809+AXP806 pair used with the A80 SoC.
The logic there which adds a dependency note to Sphinx cache
is not taking into account that the build dir may not be
the source dir. This causes a performance regression:
$ time make O=/tmp/foo SPHINXDIRS=admin-guide htmldocs
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().
The current implementation may lead to buffer overflow when:
1. Unregistration creates NULL gaps in registered_fb[]
2. All array slots become occupied despite num_registered_fb < FB_MAX
3. The registration loop exceeds array bounds
Add boundary check to prevent registered_fb[FB_MAX] access.
Some servers might enforce the SPN to be set in the target info
blob (AV pairs) when sending NTLMSSP_AUTH message. In Windows Server,
this could be enforced with SmbServerNameHardeningLevel set to 2.
Fix this by always appending SPN (cifs/<hostname>) to the existing
list of target infos when setting up NTLMv2 response blob.
Cc: linux-cifs@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Reported-by: Pierguido Lambri <plambri@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
To query root path (without msearch wildcard) it is needed to
send pattern '\' instead of '' (empty string).
This allows to use CIFSFindFirst() to query information about root path
which is being used in followup changes.
This change fixes the stat() syscall called on the root path on the mount.
It is because stat() syscall uses the cifs_query_path_info() function and
it can fallback to the CIFSFindFirst() usage with msearch=false.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MediaTek implementation of the sbsa_gwdt watchdog has a race
condition where a write to SBSA_GWDT_WRR is ignored if it occurs while
the hardware is processing a timeout refresh that asserts WS0.
Detect this based on the hardware implementer and adjust
wdd->min_hw_heartbeat_ms to avoid the race by forcing the keepalive ping
to be one second later.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Acked-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250721230640.2244915-1-aplattner@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
"REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line"
warnings seen after resuming from s2idle.
DCN314 has issues with DSC power gating that cause REG_WAIT timeouts
when attempting to power down DSC blocks.
[How]
Disable dsc_power_gate for dcn314 by default.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If PSR-SU is disabled on the link, then configuring su_y granularity in
mod_power_calc_psr_configs() can lead to assertions in
psr_su_set_dsc_slice_height().
[How]
Check the PSR version in amdgpu_dm_link_setup_psr() to determine whether
or not to configure granularity.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If amdgpu_dm failed to initalize before amdgpu_dm_initialize_drm_device()
completed then freeing atomic_obj will lead to list corruption.
[How]
Check if atomic_obj state is initialized before trying to free.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fails vhost_add_used_n() early when __vhost_add_used()
fails to make sure used idx is not updated with stale used ring
information.
Reported-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During rcu_read_unlock_special(), if this happens during irq_exit(), we
can lockup if an IPI is issued. This is because the IPI itself triggers
the irq_exit() path causing a recursive lock up.
This is precisely what Xiongfeng found when invoking a BPF program on
the trace_tick_stop() tracepoint As shown in the trace below. Fix by
managing the irq_work state correctly.
irq_exit()
__irq_exit_rcu()
/* in_hardirq() returns false after this */
preempt_count_sub(HARDIRQ_OFFSET)
tick_irq_exit()
tick_nohz_irq_exit()
tick_nohz_stop_sched_tick()
trace_tick_stop() /* a bpf prog is hooked on this trace point */
__bpf_trace_tick_stop()
bpf_trace_run2()
rcu_read_unlock_special()
/* will send a IPI to itself */
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
A simple reproducer can also be obtained by doing the following in
tick_irq_exit(). It will hang on boot without the patch:
Currently the TTM shrinker aborts shrinking as soon as it frees pages from
any of the page order pools and by doing so it can fail to respect the
freeing target which was configured by the shrinker core.
We use the wording "can fail" because the number of freed pages will
depend on the presence of pages in the pools and the order of the pools on
the LRU list. For example if there are no free pages in the high order
pools the shrinker core may require multiple passes over the TTM shrinker
before it will free the default target of 128 pages (assuming there are
free pages in the low order pools). This inefficiency can be compounded by
the pool LRU where multiple further calls into the TTM shrinker are
required to end up looking at the pool with pages.
Improve this by never freeing less than the shrinker core has requested.
At the same time we start reporting the number of scanned pages (freed in
this case), which prevents the core shrinker from giving up on the TTM
shrinker too soon and moving on.
[Why & How]
Observe that we try to access DPCD 0x600h of disconnected DP ports.
In order not to wasting time on retrying these ports, call
dpcd_write_rx_power_ctrl() after checking its connection status.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
New sequence from HW for reset and firmware reloading has been
provided that aims to stabilize the reload sequence in the case the
firmware is hung or has outstanding requests.
[How]
Update the sequence to remove the DMUIF reset and the redundant
writes in the release.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
and other related metrics properly.
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
A decade ago commit 6d08acd2d32e ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde22d ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
For the evict fail case, the evict error should be returned.
v2: Consider ENOENT case.
v3: Abort directly when the eviction failed for some reason (except for -ENOENT)
and not wait for the move to finish
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250603091154.3472646-1-Emily.Deng@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a
minimum clock check in the mode_valid callback to ensure that the clock
value does not fall below the valid range.
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
Xe can free some of the data pointed to by the dma-fences it exports. Most
notably the timeline name can get freed if userspace closes the associated
submit queue. At the same time the fence could have been exported to a
third party (for example a sync_fence fd) which will then cause an use-
after-free on subsequent access.
To make this safe we need to make the driver compliant with the newly
documented dma-fence rules. Driver has to ensure a RCU grace period
between signalling a fence and freeing any data pointed to by said fence.
For the timeline name we simply make the queue be freed via kfree_rcu and
for the shared lock associated with multiple queues we add a RCU grace
period before freeing the per GT structure holding the lock.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-5-tvrtko.ursulin@igalia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If scan happen during start_ap, the register which control TX might be
turned off during scan. Additionally, if set_channel occurs during scan
will backup this register and set to firmware after set_channel done.
When scan complete, firmware will also set TX by this register, causing
TX to be disabled and beacon can't be TX. Therefore, in assign/unassign_vif
call scan abort before set_channel to avoid scan racing with set_channel.
Replace pr_err() with pr_err_ratelimited() in ptp_clock_settime() to
prevent log flooding when the physical clock is free running, which
happens on some of my hosts. This ensures error messages are
rate-limited and improves kernel log readability.
When using `bpftool --version -j/-p`, the JSON writer object
created in do_version() was not properly destroyed after use.
This caused a memory leak each time the version command was
executed with JSON output.
Fix: 004b45c0e51a (tools: bpftool: provide JSON output for all possible commands)
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
According to the datasheet, BCM5325 uses B53_PD_MODE_CTRL_25 register to
disable clocking to individual PHYs.
Only ports 1-4 can be enabled or disabled and the datasheet is explicit
about not toggling BIT(0) since it disables the PLL power and the switch.
In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown
admin queue command opcode is encountered.
This prevents the function from silently succeeding on invalid input
and prevents undefined behavior by ensuring the function fails gracefully
when an unrecognized opcode is provided.
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a stub implementation of is_vlan_dev() that returns false when
VLAN support is not compiled in (CONFIG_VLAN_8021Q=n).
This allows us to compile-out VLAN-dependent dead code when it is not
needed.
This also resolves the following compilation error when:
* CONFIG_VLAN_8021Q=n
* CONFIG_OBJTOOL=y
* CONFIG_OBJTOOL_WERROR=y
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: error: objtool: parse_mirred.isra.0+0x370: mlx5e_tc_act_vlan_add_push_action() missing __noreturn in .c/.h or NORETURN() in noreturns.h
The error occurs because objtool cannot determine that unreachable BUG()
(which doesn't return) calls in VLAN code paths are actually dead code
when VLAN support is disabled.
On multi-aid SOCs, there could be a continuous stream of interrupts from
GC after poison consumption. Suspend IH to disable them before doing
mode-2 reset. This avoids conflicts in hardware accesses during
interrupt handlers while a reset is ongoing.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If drm_atomic_helper_suspend() has failed for any reason, it's stored
in adev->dm.cached_state. This isn't expected because the resume
(or complete()) sequence will attempt to use the stored state to
resume.
Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250602014432.3538345-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several other ASICs allow printing OD SCLK levels without setting DPM
control to manual. When OD is disabled it will show the range the
hardware supports. When OD is enabled it will show what values have
been programmed. Adjust VanGogh to work the same.
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Reported-by: Vicki Pfau <vi@endrift.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250609031227.479079-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
typecheck creates local variables based on the type passed. That could
result in stack frame size warnings like below in certain configs:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:2885:1: error: the frame size of 8304 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Checking against the pointer type is sufficient for the purpose of
getting a diagnostic message during build time.
This effectively reverts 6e8b0ff1ba4c ("dpaa_eth: Add change_carrier()
for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that
fixed_phy_register() has been called before, directly or indirectly.
And that's not the case in this driver.
If kretprobe_find_ret_addr() fails to find the original return address,
it returns 0. Check for this case so that a reliable stacktrace won't
silently ignore it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrea della Porta <andrea.porta@suse.com> Cc: Breno Leitao <leitao@debian.org> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Song Liu <song@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-and-tested-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20250521111000.2237470-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, TID is not decremented before peer cleanup, during error
handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to
out-of-bounds access in peer->rx_tid[].
Hence, add a decrement operation for TID, before peer cleanup to
ensures proper cleanup and prevents out-of-bounds access issues when
the RX peer frag setup fails.
The commit 89ac53e96217 ("wifi: ath12k: Enable REO queue lookup table
feature on QCN9274") originally intended to enable the reoq_lut_support
hardware parameter flag for both QCN9274 hw1.0 and hw2.0. However,
it enabled it only for QCN9274 hw1.0.
Hence, enable REO queue lookup table feature on QCN9274 hw2.0.
The function `_rtl_pci_init_one_rxdesc()` can fail even when the new
`skb` is passed because of a DMA mapping error. If it fails, the `skb`
is not saved in the rx ringbuffer and thus lost.
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
[why]
DCN35 is having “DC: failed to blank crtc!” when running HPO
test cases. It's caused by not having sufficient udelay time.
[how]
Replace the old wait_for_blank_complete function with fsleep function to
sleep just until the next frame should come up. This way it doesn't poll
in case the pixel clock or other clock was bugged or until vactive and
the vblank are hit again.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wen Chen <Wen.Chen3@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of checking the response flag, use status mask also to check
against any unexpected failures like a device drop. Also, log error if
waiting on a psp response fails/times out.
Disable BH does not change the SOFTIRQ corresponding bits in
preempt_count() for RT kernels, this commit therefore use
softirq_count() to check the if BH is disabled.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For the iwlmld driver the RX command is using struct iwl_rx_mpdu_desc
and not the much older struct iwl_rx_mpdu_res_start. Adjust the value of
rx_mpdu_cmd_hdr_size accordingly so that the trace data is correct.
There is a requirement to exit EMLSR if there wasn't enough throughput
in the secondary link.
This is checked in check_tpt_wk, which runs every 5 seconds in a high
throughput scenario (when the throughput blocker isn't set)
It can happen that this worker is running immediately after we entered
EMLSR, and in that case the secondary link didn't have a chance to have
throughput. In that case we will exit EMLSR for no good reason.
Fix this by tracking the time we entered EMLSR, and in the worker make
sure that 5 seconds passed from when we entered EMLSR. If not, don't
check the secondary link throughput.
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
packing.h uses ARRAY_SIZE(), BUILD_BUG_ON_MSG(), min(), max(), and
sizeof_field() without including the headers where they are defined,
potentially causing build failures.
ath12k station is unable to associate with non-transmitting BSSes
in a Multiple BSS set because the user-space does not receive
information about the non-transmitting BSSes from mac80211's
scan results.
The ath12k driver does not advertise its MBSSID capability to mac80211,
resulting in wiphy->support_mbssid not being set. Consequently, the
information about non-transmitting BSS is not parsed from received
Beacon/Probe response frames and is therefore not included in the
scan results.
Fix this by advertising the MBSSID capability of ath12k driver to
mac80211.
Currently, when a station is associated with a Non-Transmitting BSS of an
MBSSID set, beacons are not frequently received from the firmware. This
results in missing events via beacons, such as channel switches, leading
to the station not switching to new channel as the AP does, eventually
causing a kick out event from the firmware. This issue arises due to
missing configuration of Non-Transmitting BSS information in station's
vdev up command.
Fix this by filling information such as the Transmitting BSSID, profile index
and profile count in vdev up command of station.
When both AP/STA and monitor interfaces are enabled, ieee80211_tx_status()
is invoked from two paths: the TX completion handler for data frames
and the WMI TX completion handler for management frames.
In the data path, the skb->cb is properly zeroed using memset, but in
the WMI path, this step is missing.
As a result, mac80211 encountered uninitialized (junk) values in
skb->cb when generating the radiotap header for monitor mode, leading
to invalid radiotap lengths.
Hence, explicitly zero the status field in the skb->cb using memset
in WMI TX completion path to ensure consistent and correct behavior
during WMI tx completion path.
Additionally, set info->status.rates[0].idx = -1 to indicate that
no valid rate information is available, avoiding misinterpretation of
garbage values.
projects / thirdparty / kernel / stable.git / log
