However, that broke the generation of the opkg-based images, that lacks
openssl. The error is a python stack trace, showing that shutil.copytree
tries to copy a non-existing directory.
bavery [Thu, 19 May 2016 22:04:39 +0000 (15:04 -0700)]
gdb: Backport patch to changes with AVX and MPX
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
Peter Seebach [Wed, 18 May 2016 21:30:47 +0000 (16:30 -0500)]
acl.inc, run-ptest: improve ptest functionality on limited rootfs
ACL's ptest has a handful of failure modes which can be triggered by
a restrictive or small system. First, the ptest requires that daemon
be in the bin group, which run-ptest attempts to do using gpasswd,
but gpasswd is part of shadow, and oe-core removes shadow when it
doesn't think shadow will be needed. Even if, say, a package has
RDEPENDS on it. Whoops. So we manually sed the group file. This
will probably work.
Second, the filesystem used for the test has to support ACLs,
so we create a dummy ext3 filesystem and use that.
Third, the root/permissions test relies on the assumption that
"mkdir d" produces a directory which non-root users can access,
but in a secure product which defaults to umask 077, this doesn't
work. (That fix has been separately reported to upstream acl
through their bug report form.)
(This may prevent the test from running without mkfs.ext3, but it
allows the test to run on targets where root doesn't have ACL
support. Tradeoffs, tradeoffs everywhere.)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Herve Jourdain [Wed, 18 May 2016 12:33:37 +0000 (20:33 +0800)]
mesa: fix mesa_populate_packages() when dri is disabled
When compiling mesa, if dri is disabled in PACKAGECONFIG, or if the list of DRI
drivers is empty, it will cause populate_package to fail, because it can't find
- rightfully - the directory for the DRI drivers. This patch checks that the
directory indeed exists before trying to get a list of the files in it
Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 9 May 2016 04:43:31 +0000 (16:43 +1200)]
classes/kernel: check OLDEST_KERNEL at configure time
If the kernel being built is older than OLDEST_KERNEL and we're building
with glibc, then the C library we're building is probably not going to
be compatible with the kernel and we should warn the user. (This is
easier to do here rather than when building glibc, because we don't
necessarily have the information we need to determine the kernel version
there, whereas we do here.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christian Ege <k4230r6@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Blacklist SSTATE_DIR, DL_DIR and TMPDIR by default to avoid problems
such as the one mentioned in [YOCTO #9605].
* Blacklist BB_NUMBER_PARSE_THREADS since we already blacklist
BB_NUMBER_THREADS and they may be set separately.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marek Vasut [Sun, 8 May 2016 11:21:53 +0000 (13:21 +0200)]
kernel: fitimage: Repair misuse of shell test command
The kernel fitImage must be amended with signature if and only if
UBOOT_SIGN_ENABLE = 1 . In the current case, the UBOOT_SIGN_ENABLE
could be either 0 (default) or 1 , which test -n always correctly
interprets as non-empty string, thus always true. This does not
match the logic above though, so replace the test with check which
passes only for UBOOT_SIGN_ENABLE = 1 .
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Yannick Gicquel <yannick.gicquel@iot.bzh> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream in 5.33 btmgmt was moved from experimental to common READLINE section,
in commit e4f0c5582f1fe3451d5588243adba9de1ed68b80, but this was never updated
in the recipe.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 18 May 2016 09:03:59 +0000 (02:03 -0700)]
webkitgtk: turn off JIT on armv4 and armv7a
* It doesn't build on armv4:
{standard input}: Assembler messages:
{standard input}:52: Error: selected processor does not support `blx llint_throw_stack_overflow_error' in ARM mode
{standard input}:126: Error: selected processor does not support `bkpt #0' in ARM mode
{standard input}:128: Error: selected processor does not support `blx r0' in ARM mode
{standard input}:134: Error: selected processor does not support `bkpt #0' in ARM mode
{standard input}:185: Error: selected processor does not support `blx llint_throw_stack_overflow_error' in ARM mode
{standard input}:256: Error: selected processor does not support `blx r4' in ARM mode
{standard input}:310: Error: selected processor does not support `movw r2,#:lower16:.Lllint_op_enter-.LrelativePCBase' in ARM mode
{standard input}:311: Error: selected processor does not support `movt r2,#:upper16:.Lllint_op_enter-.LrelativePCBase' in ARM mode
{standard input}:315: Error: selected processor does not support `movw r2,#:lower16:.Lllint_op_get_scope-.LrelativePCBase' in ARM mode
{standard input}:316: Error: selected processor does not support `movt r2,#:upper16:.Lllint_op_get_scope-.LrelativePCBase' in ARM mode
[snip]
* It can build on armv7a, but doesn't work on runtime, cause
displaying problems or ephiphany hang.
Awais Belal [Thu, 19 May 2016 11:26:59 +0000 (16:26 +0500)]
mesa-demos: provide option for disabling GLX demos
There are platforms that default to EGL only configurations
in which case the GLX applications are not required
at all. Allow the user to control generation of these
demos as needed through a configure switch.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Thu, 19 May 2016 12:59:30 +0000 (13:59 +0100)]
bitbake: toaster: Add a specific test settings file
When running certain tests we want a particular database specified.
When bitbake toaster ui is being tested pass it these test settings so
that it uses the same database as the unit tests running.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Thu, 19 May 2016 12:59:29 +0000 (13:59 +0100)]
bitbake: toaster: runbuilds move the execution sequence out of the poll loop
Move the execution sequence for a build out of the polling loop and into
it's own fuction. This means that we can call the function on it's own
if we just want to trigger one build rather than infinite polling.
This is something needed for the build tests.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Thu, 19 May 2016 12:59:28 +0000 (13:59 +0100)]
bitbake: toaster: Remove DATABASE_URL being passed around as an environment var
We don't need to pass the DATABASE_URL around and read it back if we
setup the django framework in the correct way.
We make the default sqlite database path a full path so that the
database isn't being assumed to be in CWD.
Also add some more useful comments on the database settings.
This is preparation work to migrate the build tests and be able to
trigger builds on differently configured databases.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sujith H [Thu, 19 May 2016 10:43:32 +0000 (11:43 +0100)]
bitbake: toaster-tests: tests for project config
Add basic tests to validate the value user types
in the text box for IMAGEFS_TYPES. Added a test
case to show the checkbox get automatically selected
when user types value available in the check list.
Added a test case to verify if the check box is enabled
then the text box should also get updated accordingly.
Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake: toaster: projectconf Small tweaks to IMAGE_FSTYPES form
Add a label to clarify the purpose of the first input field, replace <p>
with <label> for the second set of controls, and give some top margin to
the validation message.
Sujith H [Thu, 19 May 2016 10:43:30 +0000 (11:43 +0100)]
bitbake: toaster: handle multiple imagefs types
This functionality helps users to add custom
image fs types available other than the checkboxes
in the UI. User can add imagefs types in the text
box and use them in the build.
Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rootfs.py: Unify _log_check_warn() and _log_check_error()
Use a common _log_check_common() function (based on the old
_log_check_warn() function) to implement the logic for both
_log_check_warn() and _log_check_error().
The main benefit of this is that now all error messages will be
reported again, not just the first one found. Additionally the output
will now look the same for both error and warning messages.
This removes the context for the error messages. However, since there
was no indication in the output that some of the lines were context,
they were more confusing than helping.
For each warning found in the log, _log_check_warn() would output a
line stating that it had found a warning, then the actual warning and
finally an empty line. This is quite excessive when there are many
warnings in the log.
With this change the output is instead a line stating how many
warnings were found, followed by the warnings. This makes the output
much more compact and actually much more readable.
rootfs.py: Use one way to exclude lines in _log_check_error()
Before there were three different ways to exclude a line from being
searched for error messages in _log_check_error(). Now there is only
one: an array of regular expressions. This should make it easy to add
more excludes if nedded.
rootfs.py: Simplify the regular expression used in _log_check_warn()
In commit 0387d095 lines with "NOTE:" in them were excluded from the
log check for warnings. However, those lines were only there in the
first place since the regular expression that is used to find warning
messages explicitly included those lines...
rootfs.py: Remove _log_check_error() from the RpmRootfs class
The fact that this function was overridden in the RpmRootfs class
seems to have led to a number of misstakes when changes have been made
to the base function in the Rootfs class. E.g., this change will
properly solve ticket 7789, which was supposedly solved in 38871dc0,
but that change had no effect in practice as the log_check_regex that
was modified for RpmRootfs class was not used by the RpmRootfs version
of _log_check_error()...
The only thing _log_check_error() in RpmRootfs did that the base
function in Rootfs did not do was to skip lines in the log that begin
with a + sign. This has now been moved to the base function instead.
Revert "rootfs.py: add more info to the warning message"
The reverted commit added a warning with the log line that triggered
the log check for error messages before the warning that states that
an error has been found in the log. However, the error line is output
by the call to bb.fatal() that follows immediately after the original
warning, which makes it redundant. Additionaly, having two warnings
contradicts the intent of commit 8dfdd329 where the log warnings were
tidied up.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Ross Burton <ross.burton@intel.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Walter Goossens <waltergoossens@home.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 18 May 2016 04:20:15 +0000 (21:20 -0700)]
useradd.bbclass: Strip trailing ';' in cmd params
When there are more than 1 packages in a recipe requiring useradd
services, they are concatnated and a ';' is inserted just after
each of the users being added by the packages. A situation arises
in cases where this is controlled by PACKAGECONFIG then we add a
';' separator in the USERADD_PARAM value itself for each packagecofig
since we do not know which one will be picked, we end up in situation
where the final string returned from get_all_cmd_params() appears to be
a; ; b; c;
and then the logic which uses these cmds triggers with ';' as separator
but in this case it will fail after executing useradd 'a' because the next
cmd it will call will be just a whitespace
This is highlighted by the systemd patch to add more users as needed
by systemd 229 components.
This variable is a regex-escaped version of LAYERDIR, for safer use in
BBFILE_PATTERN, so as to avoid issues with regex special characters in the
layer path.
bitbake: bb.cooker: show limited traceback for parsing ExpansionError
It's useful to see tracebacks for ExpansionErrors, but only if we skip the
leading bitbake-internal elements, otherwise we see elements of the expansion
process.
As one example:
Before:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
After:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb
Traceback (most recent call last):
File "PV[:=]", line 1, in <module>
File "/scratch/yocto-new/external-as-needed/meta-sourcery/recipes-external/glibc/glibc-external-version.inc", line 3, in get_external_libc_version(d=<bb.data_smart.DataSmart
object at 0x7f05d2566950>):
sopattern = os.path.join(d.getVar('base_libdir', True), 'libc-*.so')
> found_paths = oe.external.find_sysroot_files([sopattern], d)
if found_paths:
ExpansionError: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
Edwin Plauchu [Tue, 17 May 2016 19:26:16 +0000 (14:26 -0500)]
makedevs: fix security issues
This avoids makedevs failure to compile with compiler flags
which elevate common string formatting issues into an error
(-Wformat -Wformat-security -Werror=format-security).
Edwin Plauchu [Tue, 17 May 2016 19:25:11 +0000 (14:25 -0500)]
zip: fix security issues
This patch avoids zip recipe fails to compile with compiler
flags which elevate common string formatting issues into an
error (-Wformat -Wformat-security -Werror=format-security).
Edwin Plauchu [Tue, 17 May 2016 19:25:35 +0000 (14:25 -0500)]
stat: fix security issues
This patch avoids stat fails to compile with compiler flags which
elevate common string formatting issues into an error (-Wformat
-Wformat-security -Werror=format-security).
It was added for testing, and not needed any more after: 4a8a74c62836a20610daf029d4cec0b3087758b2
Author: Robert Yang <liezhi.yang@windriver.com>
Date: Mon Mar 21 02:25:50 2016 -0700
Martin Jansa [Wed, 18 May 2016 09:57:33 +0000 (11:57 +0200)]
useradd: use bindir_native for pseudo PATH
* useradd/userdel functions will fail for recipes which override their target prefix
(e.g. to /opt/foo), because it will try to use pseudo from native-sysroot/opt/foo/bin/pseudo
Humberto Ibarra [Wed, 18 May 2016 16:17:59 +0000 (11:17 -0500)]
scripts/oe-selftest: Improve listing by reducing unneeded spacing
The --list-tests option assumes a terminal of 150 characters wide,
which is clearly wrong. The output for this command is messy and
hard to understand for lower widths. Every command should look
good in a 80 characters terminal.
Unfortunately, this can't be done at the moment. The bad naming of
testcases have made the test names incredibly long.
This patch reduces spacing between columns and shows the tests
names in a concise and understandable way. The format is even the
same one required for running a testcase. Once the testcase naming
improves, this output will look even better.
Raymond Tan [Tue, 17 May 2016 05:41:09 +0000 (13:41 +0800)]
mkefidisk.sh: mount images as read-only
Mount the hddimg and rootfs.img as read-only when creating the bootable
image on the medium. Otherwise, the md5 checksum values of the hddimg will
be altered. As this changed checksum value might cause issue for users
whom would reuse the hddimg.
The error reporting improvements were merged upstream (smartpm 406541f569)
and refactored later (smartpm 20af0aac33), yet a part of the patch was
kept here (oe-core 5fc580fc44).
Due to the upstream refactoring the patch still applies cleanly, but it
isn't actually needed. The added changes are duplicate or dead code.
Klauer, Daniel [Tue, 17 May 2016 12:58:04 +0000 (12:58 +0000)]
python-smartpm: Don't ignore error if RPM transaction fails without problems
SmartPM could misinterpret RPM transaction error as success,
if ts.run() (RPM Python API) returns an empty problems list.
This could happen for example if the RPM database is partially corrupted
such that the transaction does not have any problems like conflicts or
missing dependencies, but still can't be committed.
The added patch fixes the problem in the upstream sources;
one of the existing patches has to be adjusted to still apply.
SmartPM's --remove-all option was unusable, because the fix from
commit 03266e89a6 was lost in commit 5fc580fc44. Thus, add a new
patch to fix --remove-all.
It seems like the previous fix was lost by mistake:
Upstream merged the *old* version of the patch (smartpm 406541f569),
and when SmartPM in oe-core was upgraded to the new upstream release,
the --remove-all fix from the *new* patch was not carried over.
Mariano Lopez [Mon, 2 May 2016 13:19:15 +0000 (13:19 +0000)]
testexport.bbclass: Split testimage class
This adds a new class that only export tests of images,
the code was taken from testimage class and most of it
wasn't modified. Just add some vars for the new class.
testexport class require testimage class to get the
test suites defined for all the images.
Mariano Lopez [Mon, 2 May 2016 13:19:14 +0000 (13:19 +0000)]
oeqa/oetest.py: Add class ExportTestContext
Adding the class is needed to separate the exported test
from the test image; both test run under different conditions,
i.e. an exported test doesn't require to change the signal
handling.
This change adds clasess ExportTestContext and ImageTestContext,
both of them inherits from RuntimeTestContext. Also refactors
RuntimeTestContext class, to keep the code common in this class.
Richard Purdie [Wed, 18 May 2016 18:28:29 +0000 (19:28 +0100)]
pseudo: Work around issues with glibc 2.24
There are issues with a change made to RTLD_NEXT behaviour in glibc 2.24
and that change was also backported to older glibc versions in some distros
like Fedora 23. This adds a workaround whilst the pseudo maintainer fixes
various issues properly.
Richard Purdie [Wed, 18 May 2016 22:13:06 +0000 (23:13 +0100)]
glibc: Add missing patch hunk back
This hunk of patch went missing during the glibc upgrade to 2.24
and without it, uninative-tarball doesn't work properly. This adds
it back so we can spin a new version of uninative.
Jussi Kukkonen [Mon, 16 May 2016 13:22:50 +0000 (16:22 +0300)]
weston: Upgrade 1.9.0 -> 1.10.0
Support for multiple new protocols, many new features:
https://lists.freedesktop.org/archives/wayland-devel/2016-February/027039.html
* Weston now depends on wayland-protocols (which is protocol
collection split off from weston).
* Remove upstreamed patches, add a patch to fix the wayland-protocols
path used during build.
* Use HTTPS for tarball download
Jussi Kukkonen [Mon, 16 May 2016 13:22:49 +0000 (16:22 +0300)]
wayland-protocols: Add recipe
wayland-protocols is a collection of Wayland protocols split
out from weston. It is a build dependency for Weston 1.10.
* Added a patch to enable allarch build.
* Use HTTPS for tarball uri.
Jussi Kukkonen [Mon, 16 May 2016 13:22:38 +0000 (16:22 +0300)]
glib-2.0: Upgrade 2.46.2 -> 2.48.1
* Remove now unnecessary readlink patches and
ignore-format-nonliteral-warning.patch
* Port relocate-modules.patch
* Add ${datadir}/gettext/its to FILES_${PN}-dev: this could be done in
gettext.bbclass but so far glib is the first and only ITS rule
installer
Richard Purdie [Mon, 16 May 2016 21:52:00 +0000 (22:52 +0100)]
bitbake: knotty: Fix output buffering issues
We need to flush the footer removal, else it may not be outputted until
the buffer is flushed as part of StreamHandler and this would lead to
it removing the ERROR output just printed which is extremely confusing.
Also ensure the footer is cleared before printing a summary as in
some cases it wasn't being removed, also leading to user confusion.
Richard Purdie [Mon, 16 May 2016 21:51:08 +0000 (22:51 +0100)]
bitbake: siggen: Fixes to handle sigdata/siginfo files only containing basehash data
The signature data file comparison functions are meant to be able to
handle data files containing just the base hash data. This had regressed
in some places so add fixes to allow these comparisons to be made. The
runtime components in the data files are optional.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Thu, 12 May 2016 14:10:37 +0000 (15:10 +0100)]
bitbake: toasterui: capture keyboard interrupts the same way as knotty
knotty captures two levels of keyboard interrupt: a single interrupt
or two interrupts in a row. These then trigger stateShutdown
and stateForceShutdown respectively.
toasterui doesn't have an equivalent way of capturing interrupts and
using them to shut down bitbake. Now that we are no longer using
knotty + XMLRPCServer for our command line builds (since switching to
per-project build directories), we see some odd side effects of this,
such as builds continuing after they have been interrupted on the
command line.
Bring toasterui in line with knotty (copy-paste most of the code
in knotty.py which deals with interrupts) so that a keyboard
interrupt actually shuts down the bitbake server (if not in
observe only mode).
Additionally use the cancel_cli_build() method to set the Build
status to CANCELLED in Toaster's db when we get keyboard interrupts.
This means that builds interrupted on the command line show as
cancelled (same as if they'd been cancelled from the Toaster UI),
as specified in the UI designs.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After clean ups remove api assumptions. Our table data often contains
html snippets to display certain things such as dependency pop overs or
simply links to other parts of the UI. Take these into account when
testing the values of the table data.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Mon, 16 May 2016 13:50:40 +0000 (14:50 +0100)]
bitbake: toaster: toastertables: Clean up and fix up a number of items
- Remove the unused 'computation' field
- Remove the code to try to make the tables behave like an api
- Remove custom JSON encoder in favour of DjangoJSONEncoder
- Simplify get_data and add comments
- Add exception type instead of using generic Exception
- Clean up python style warnings
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
