Wei Fang [Tue, 25 Nov 2025 08:52:08 +0000 (16:52 +0800)]
net: fec: do not update PEROUT if it is enabled
If the previously set PEROUT is already active, updating it will cause
the new PEROUT to start immediately instead of at the specified time.
This is because fep->reload_period is updated whithout check whether
the PEROUT is enabled, and the old PEROUT is not disabled. Therefore,
the pulse period will be updated immediately in the pulse interrupt
handler fec_pps_interrupt().
Currently, the driver does not support directly updating PEROUT and it
will make the logic be more complicated. To fix the current issue, add
a check before enabling the PEROUT, the driver will return an error if
PEROUT is enabled. If users wants to update a new PEROUT, they should
disable the old PEROUT first.
Wei Fang [Tue, 25 Nov 2025 08:52:07 +0000 (16:52 +0800)]
net: fec: cancel perout_timer when PEROUT is disabled
The PEROUT allows the user to set a specified future time to output the
periodic signal. If the future time is far from the current time, the FEC
driver will use hrtimer to configure PEROUT one second before the future
time. However, the hrtimer will not be canceled if the PEROUT is disabled
before the hrtimer expires. So the PEROUT will be configured when the
hrtimer expires, which is not as expected. Therefore, cancel the hrtimer
in fec_ptp_pps_disable() to fix this issue.
Jeremy Kerr [Tue, 25 Nov 2025 06:48:54 +0000 (14:48 +0800)]
net: mctp: unconditionally set skb->dev on dst output
On transmit, we are currently relying on skb->dev being set by
mctp_local_output() when we first set up the skb destination fields.
However, forwarded skbs do not use the local_output path, so will retain
their incoming netdev as their ->dev on tx. This does not work when
we're forwarding between interfaces.
Set skb->dev unconditionally in the transmit path, to allow for proper
forwarding.
We keep the skb->dev initialisation in mctp_local_output(), as we use it
for fragmentation.
Jakub Kicinski [Thu, 27 Nov 2025 03:56:00 +0000 (19:56 -0800)]
Merge tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-11-26
this is a pull request of 8 patches for net/main.
Seungjin Bae provides a patch for the kvaser_usb driver to fix a
potential infinite loop in the USB data stream command parser.
Thomas Mühlbacher's patch for the sja1000 driver IRQ handler's max
loop handling, that might lead to unhandled interrupts.
3 patches by me for the gs_usb driver fix handling of failed transmit
URBs and add checking of the actual length of received URBs before
accessing the data.
The next patch is by me and is a port of Thomas Mühlbacher's patch
(fix IRQ handler's max loop handling, that might lead to unhandled
interrupts.) to the sun4i_can driver.
Biju Das provides a patch for the rcar_canfd driver to fix the CAN-FD
mode setting.
The last patch is by Shaurya Rane for the em_canid filter to ensure
that the complete CAN frame is present in the linear data buffer
before accessing it.
* tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header
can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs
can: sja1000: fix max irq loop handling
can: kvaser_usb: leaf: Fix potential infinite loop in command parsers
====================
Jiefeng Zhang [Wed, 26 Nov 2025 03:22:49 +0000 (11:22 +0800)]
net: atlantic: fix fragment overflow handling in RX path
The atlantic driver can receive packets with more than MAX_SKB_FRAGS (17)
fragments when handling large multi-descriptor packets. This causes an
out-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic.
The issue occurs because the driver doesn't check the total number of
fragments before calling skb_add_rx_frag(). When a packet requires more
than MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds.
Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE,
then all fragments are accounted for. And reusing the existing check to
prevent the overflow earlier in the code path.
This crash occurred in production with an Aquantia AQC113 10G NIC.
Jon Kohler [Tue, 25 Nov 2025 22:27:53 +0000 (15:27 -0700)]
virtio-net: avoid unnecessary checksum calculation on guest RX
Commit a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP
GSO tunneling.") inadvertently altered checksum offload behavior
for guests not using UDP GSO tunneling.
Before, tun_put_user called tun_vnet_hdr_from_skb, which passed
has_data_valid = true to virtio_net_hdr_from_skb.
After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead,
which passes has_data_valid = false into both call sites.
This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID
for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result,
guests are forced to recalculate checksums unnecessarily.
Restore the previous behavior by ensuring has_data_valid = true is
passed in the !tnl_gso_type case, but only from tun side, as
virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver,
which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx.
cc: stable@vger.kernel.org Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") Signed-off-by: Jon Kohler <jon@nutanix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir [Tue, 25 Nov 2025 21:17:04 +0000 (13:17 -0800)]
eth: fbnic: Fix counter roll-over issue
Fix a potential counter roll-over issue in fbnic_mbx_alloc_rx_msgs()
when calculating descriptor slots. The issue occurs when head - tail
results in a large positive value (unsigned) and the compiler interprets
head - tail - 1 as a signed value.
Since FBNIC_IPC_MBX_DESC_LEN is a power of two, use a masking operation,
which is a common way of avoiding this problem when dealing with these
sort of ring space calculations.
Paolo Abeni [Tue, 25 Nov 2025 16:59:11 +0000 (17:59 +0100)]
mptcp: clear scheduled subflows on retransmit
When __mptcp_retrans() kicks-in, it schedules one or more subflows for
retransmission, but such subflows could be actually left alone if there
is no more data to retransmit and/or in case of concurrent fallback.
Scheduled subflows could be processed much later in time, i.e. when new
data will be transmitted, leading to bad subflow selection.
Explicitly clear all scheduled subflows before leaving the
retransmission function.
Fixes: ee2708aedad0 ("mptcp: use get_retrans wrapper") Cc: stable@vger.kernel.org Reported-by: Filip Pokryvka <fpokryvk@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251125-net-mptcp-clear-sched-rtx-v1-1-1cea4ad2165f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 22 Nov 2025 11:13:24 +0000 (13:13 +0200)]
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
When using the SGMII PCS as a fixed-link chip-to-chip connection, it is
easy to miss the fact that traffic passes only at 1G, since that's what
any normal such connection would use.
When using the SGMII PCS connected towards an on-board PHY or an SFP
module, it is immediately noticeable that when the link resolves to a
speed other than 1G, traffic from the MAC fails to pass: TX counters
increase, but nothing gets decoded by the other end, and no local RX
counters increase either.
Artificially lowering a fixed-link rate to speed = <100> makes us able
to see the same issue as in the case of having an SGMII PHY.
Some debugging shows that the XPCS configuration is A-OK, but that the
MAC Configuration Table entry for the port has the SPEED bits still set
to 1000Mbps, due to a special condition in the driver. Deleting that
condition, and letting the resolved link speed be programmed directly
into the MAC speed field, results in a functional link at all 3 speeds.
This piece of evidence, based on testing on both generations with SGMII
support (SJA1105S and SJA1110A) directly contradicts the statement from
the blamed commit that "the MAC is fixed at 1 Gbps and we need to
configure the PCS only (if even that)". Worse, that statement is not
backed by any documentation, and no one from NXP knows what it might
refer to.
I am unable to recall sufficient context regarding my testing from March
2020 to understand what led me to draw such a braindead and factually
incorrect conclusion. Yet, there is nothing of value regarding forcing
the MAC speed, either for SGMII or 2500Base-X (introduced at a later
stage), so remove all such logic.
Jason Wang [Thu, 20 Nov 2025 02:29:50 +0000 (10:29 +0800)]
vhost: rewind next_avail_head while discarding descriptors
When discarding descriptors with IN_ORDER, we should rewind
next_avail_head otherwise it would run out of sync with
last_avail_idx. This would cause driver to report
"id X is not a head".
Fixing this by returning the number of descriptors that is used for
each buffer via vhost_get_vq_desc_n() so caller can use the value
while discarding descriptors.
Fixes: 67a873df0c41 ("vhost: basic in order support") Cc: stable@vger.kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20251120022950.10117-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shaurya Rane [Wed, 26 Nov 2025 08:57:18 +0000 (14:27 +0530)]
net/sched: em_canid: fix uninit-value in em_canid_match
Use pskb_may_pull() to ensure a complete CAN frame is present in the
linear data buffer before reading the CAN ID. A simple skb->len check
is insufficient because it only verifies the total data length but does
not guarantee the data is present in skb->data (it could be in
fragments).
pskb_may_pull() both validates the length and pulls fragmented data
into the linear buffer if necessary, making it safe to directly
access skb->data.
Reported-by: syzbot+5d8269a1e099279152bc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5d8269a1e099279152bc Fixes: f057bbb6f9ed ("net: em_canid: Ematch rule to match CAN frames according to their identifiers") Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in> Link: https://patch.msgid.link/20251126085718.50808-1-ssranevjti@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Biju Das [Tue, 18 Nov 2025 12:39:25 +0000 (12:39 +0000)]
can: rcar_canfd: Fix CAN-FD mode as default
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting")
has aligned with the flow mentioned in the hardware manual for all SoCs
except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to
the wrong logic in the commit[1] sets the default mode to FD-Only mode
instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping
the rcar_canfd_set_mode() as some SoC requires mode setting in global
reset mode, and the rest of the SoCs in channel reset mode and update the
rcar_canfd_reset_controller() to take care of these constraints. Moreover,
the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the
R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to
simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
xsk: avoid data corruption on cq descriptor number
Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor
production"), the descriptor number is stored in skb control block and
xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto
pool's completion queue.
skb control block shouldn't be used for this purpose as after transmit
xsk doesn't have control over it and other subsystems could use it. This
leads to the following kernel panic due to a NULL pointer dereference.
Instead use the skb destructor_arg pointer along with pointer tagging.
As pointers are always aligned to 8B, use the bottom bit to indicate
whether this a single address or an allocated struct containing several
addresses.
Fixes: 30f241fcf52a ("xsk: Fix immature cq descriptor production") Closes: https://lore.kernel.org/netdev/0435b904-f44f-48f8-afb0-68868474bf1c@nop.hu/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20251124171409.3845-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Sat, 22 Nov 2025 14:23:02 +0000 (15:23 +0100)]
r8169: fix RTL8127 hang on suspend/shutdown
There have been reports that RTL8127 hangs on suspend and shutdown,
partially disappearing from lspci until power-cycling.
According to Realtek disabling PLL's when switching to D3 should be
avoided on that chip version. Fix this by aligning disabling PLL's
with the vendor drivers, what in addition results in PLL's not being
disabled when switching to D3hot on other chip versions.
Fixes: f24f7b2f3af9 ("r8169: add support for RTL8127A") Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/d7faae7e-66bc-404a-a432-3a496600575f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexey Kodanev [Fri, 21 Nov 2025 12:38:34 +0000 (12:38 +0000)]
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
Currently, when skb is null, the driver prints an error and then
dereferences skb on the next line.
To fix this, let's add a 'break' after the error message to switch
to sxgbe_rx_refill(), which is similar to the approach taken by the
other drivers in this particular case, e.g. calxeda with xgmac_rx().
Found during a code review.
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251121123834.97748-1-aleksei.kodanev@bell-sw.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikola Z. Ivanov [Sat, 22 Nov 2025 00:20:27 +0000 (02:20 +0200)]
team: Move team device type change at the end of team_port_add
Attempting to add a port device that is already up will expectedly fail,
but not before modifying the team device header_ops.
In the case of the syzbot reproducer the gre0 device is
already in state UP when it attempts to add it as a
port device of team0, this fails but before that
header_ops->create of team0 is changed from eth_header to ipgre_header
in the call to team_dev_type_check_change.
Later when we end up in ipgre_header() struct ip_tunnel* points to nonsense
as the private data of the device still holds a struct team.
Example sequence of iproute2 commands to reproduce the hang/BUG():
ip link add dev team0 type team
ip link add dev gre0 type gre
ip link set dev gre0 up
ip link set dev gre0 master team0
ip link set dev team0 up
ping -I team0 1.1.1.1
Move team_dev_type_check_change down where all other checks have passed
as it changes the dev type with no way to restore it in case
one of the checks that follow it fail.
Also make sure to preserve the origial mtu assignment:
- If port_dev is not the same type as dev, dev takes mtu from port_dev
- If port_dev is the same type as dev, port_dev takes mtu from dev
This is done by adding a conditional before the call to dev_set_mtu
to prevent it from assigning port_dev->mtu = dev->mtu and instead
letting team_dev_type_check_change assign dev->mtu = port_dev->mtu.
The conditional is needed because the patch moves the call to
team_dev_type_check_change past dev_set_mtu.
Testing:
- team device driver in-tree selftests
- Add/remove various devices as slaves of team device
- syzbot
Reported-by: syzbot+a2a3b519de727b0f7903@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a2a3b519de727b0f7903 Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251122002027.695151-1-zlatistiv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rate limiting validation condition currently checks the output
variable max_bw_value[i] instead of the input value
maxrate->tc_maxrate[i]. This causes the validation to compare an
uninitialized or stale value rather than the actual requested rate.
The condition should check the input rate to properly validate against
the upper limit:
} else if (maxrate->tc_maxrate[i] <= upper_limit_gbps) {
This aligns with the pattern used in the first branch, which correctly
checks maxrate->tc_maxrate[i] against upper_limit_mbps.
The current implementation can lead to unreliable validation behavior:
- For rates between 25.5 Gbps and 255 Gbps, if max_bw_value[i] is 0
from initialization, the GBPS path may be taken regardless of whether
the actual rate is within bounds
- When processing multiple TCs (i > 0), max_bw_value[i] contains the
value computed for the previous TC, affecting the validation logic
- The overflow check for rates exceeding 255 Gbps may not trigger
consistently depending on previous array values
This patch ensures the validation correctly examines the requested rate
value for proper bounds checking.
Fixes: 43b27d1bd88a ("net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps") Signed-off-by: Danielle Costantino <dcostantino@meta.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20251124180043.2314428-1-dcostantino@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur [Fri, 21 Nov 2025 06:14:11 +0000 (07:14 +0100)]
net: lan966x: Fix the initialization of taprio
To initialize the taprio block in lan966x, it is required to configure
the register REVISIT_DLY. The purpose of this register is to set the
delay before revisit the next gate and the value of this register depends
on the system clock. The problem is that the we calculated wrong the value
of the system clock period in picoseconds. The actual system clock is
~165.617754MHZ and this correspond to a period of 6038 pico seconds and
not 15125 as currently set.
Daniel Golle [Thu, 20 Nov 2025 15:02:19 +0000 (15:02 +0000)]
net: phy: mxl-gpy: fix link properties on USXGMII and internal PHYs
gpy_update_interface() returns early in case the PHY is internal or
connected via USXGMII. In this case the gigabit master/slave property
as well as MDI/MDI-X status also won't be read which seems wrong.
Always read those properties by moving the logic to retrieve them to
gpy_read_status().
Fixes: fd8825cd8c6fc ("net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips") Fixes: 311abcdddc00a ("net: phy: add support to get Master-Slave configuration") Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/71fccf3f56742116eb18cc070d2a9810479ea7f9.1763650701.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gui-Dong Han [Thu, 20 Nov 2025 12:06:57 +0000 (20:06 +0800)]
atm/fore200e: Fix possible data race in fore200e_open()
Protect access to fore200e->available_cell_rate with rate_mtx lock in the
error handling path of fore200e_open() to prevent a data race.
The field fore200e->available_cell_rate is a shared resource used to track
available bandwidth. It is concurrently accessed by fore200e_open(),
fore200e_close(), and fore200e_change_qos().
In fore200e_open(), the lock rate_mtx is correctly held when subtracting
vcc->qos.txtp.max_pcr from available_cell_rate to reserve bandwidth.
However, if the subsequent call to fore200e_activate_vcin() fails, the
function restores the reserved bandwidth by adding back to
available_cell_rate without holding the lock.
This introduces a race condition because available_cell_rate is a global
device resource shared across all VCCs. If the error path in
fore200e_open() executes concurrently with operations like
fore200e_close() or fore200e_change_qos() on other VCCs, a
read-modify-write race occurs.
Specifically, the error path reads the rate without the lock. If another
CPU acquires the lock and modifies the rate (e.g., releasing bandwidth in
fore200e_close()) between this read and the subsequent write, the error
path will overwrite the concurrent update with a stale value. This results
in incorrect bandwidth accounting.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251120120657.2462194-1-hanguidong02@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net: dsa: microchip: Fix resource releases in error path
I worked on adding PTP support for the KSZ8463. While doing so, I ran
into a few bugs in the resource release process that occur when things go
wrong arount IRQ initialization.
This small series fixes those bugs.
The next series, which will add the PTP support, depend on this one.
net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()
The IRQ numbers created through irq_create_mapping() are only assigned
to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs
between their creation and their assignment (for instance during the
request_threaded_irq() step), we enter the error path and fail to
release the newly created virtual IRQs because they aren't yet assigned
to ptpmsg_irq[n].num.
Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry
with what's released by ksz_ptp_msg_irq_free().
In the error path, move the irq_dispose_mapping to the out_ptp_msg label
so it will be called only on created IRQs.
Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-5-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: dsa: microchip: Free previously initialized ports on init failures
If a port interrupt setup fails after at least one port has already been
successfully initialized, the gotos miss some resource releasing:
- the already initialized PTP IRQs aren't released
- the already initialized port IRQs aren't released if the failure
occurs in ksz_pirq_setup().
Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label.
Behind this label, use the reverse loop to release all IRQ resources
for all initialized ports.
Jump in the middle of the reverse loop if an error occurs in
ksz_ptp_irq_setup() to only release the port IRQ of the current
iteration.
Cc: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-4-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If something goes wrong at setup, ksz_irq_free() can be called on
uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It
leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path
to iterate only over the fully initialized ports.
net: dsa: microchip: ptp: Fix checks on irq_find_mapping()
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, during the PTP IRQ setup,
we verify that its returned value isn't negative.
Fix the irq_find_mapping() check to enter the error path when 0 is
returned. Return -EINVAL in such case.
Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-2-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: dsa: microchip: common: Fix checks on irq_find_mapping()
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, on each
irq_find_mapping() call, we verify that the returned value isn't
negative.
Fix the irq_find_mapping() checks to enter error paths when 0 is
returned. Return -EINVAL in such cases.
CC: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-1-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after
driver unbind") and commit ed4d81c4b3f2 ("net: aquantia: when cleaning
hw cache it should be toggled") fixed cache invalidation for ATL B0, but
ATL2 was left with only interrupt disabling. This allowed hardware to
write to cached descriptors after DMA memory was unmapped, triggering
SMMU faults. Once cache invalidation is applied to ATL2, the translation
fault can't be observed anymore.
Add shared aq_hw_invalidate_descriptor_cache() helper and use it in both
ATL B0 and ATL2 hw_stop() implementations for consistent behavior.
Fixes: e54dcf4bba3e ("net: atlantic: basic A2 init/deinit hw_ops") Tested-by: Carol Soto <csoto@nvidia.com> Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251120041537.62184-1-kaihengf@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Sat, 22 Nov 2025 02:18:47 +0000 (18:18 -0800)]
Merge tag 'for-net-2025-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sock: Prevent race in socket write iter and sock bind
- hci_core: Fix triggering cmd_timer for HCI_OP_NOP
- hci_core: lookup hci_conn on RX path on protocol side
- SMP: Fix not generating mackey and ltk when repairing
- btusb: mediatek: Fix kernel crash when releasing mtk iso interface
- btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
* tag 'for-net-2025-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: SMP: Fix not generating mackey and ltk when repairing
Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref
Bluetooth: hci_core: lookup hci_conn on RX path on protocol side
Bluetooth: hci_sock: Prevent race in socket write iter and sock bind
Bluetooth: hci_core: Fix triggering cmd_timer for HCI_OP_NOP
Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface
====================
Daniel Golle [Thu, 20 Nov 2025 14:17:13 +0000 (14:17 +0000)]
net: phy: mxl-gpy: fix bogus error on USXGMII and integrated PHY
As the interface mode doesn't need to be updated on PHYs connected with
USXGMII and integrated PHYs, gpy_update_interface() should just return 0
in these cases rather than -EINVAL which has wrongly been introduced by
commit 7a495dde27ebc ("net: phy: mxl-gpy: Change gpy_update_interface()
function return type"), as this breaks support for those PHYs.
Fixes: 7a495dde27ebc ("net: phy: mxl-gpy: Change gpy_update_interface() function return type") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/f744f721a1fcc5e2e936428c62ff2c7d94d2a293.1763648168.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
veth: reduce XDP no_direct return section to fix race
As explain in commit fa349e396e48 ("veth: Fix race with AF_XDP exposing
old or uninitialized descriptors") for veth there is a chance after
napi_complete_done() that another CPU can manage start another NAPI
instance running veth_pool(). For NAPI this is correctly handled as the
napi_schedule_prep() check will prevent multiple instances from getting
scheduled, but for the remaining code in veth_pool() this can run
concurrent with the newly started NAPI instance.
The problem/race is that xdp_clear_return_frame_no_direct() isn't
designed to be nested.
Prior to commit 401cb7dae813 ("net: Reference bpf_redirect_info via
task_struct on PREEMPT_RT.") the temporary BPF net context
bpf_redirect_info was stored per CPU, where this wasn't an issue. Since
this commit the BPF context is stored in 'current' task_struct. When
running veth in threaded-NAPI mode, then the kthread becomes the storage
area. Now a race exists between two concurrent veth_pool() function calls
one exiting NAPI and one running new NAPI, both using the same BPF net
context.
Race is when another CPU gets within the xdp_set_return_frame_no_direct()
section before exiting veth_pool() calls the clear-function
xdp_clear_return_frame_no_direct().
Sayooj K Karun [Wed, 19 Nov 2025 08:57:47 +0000 (14:27 +0530)]
net: atm: fix incorrect cleanup function call in error path
In atm_init(), if atmsvc_init() fails, the code jumps to out_atmpvc_exit
label which incorrectly calls atmsvc_exit() instead of atmpvc_exit().
This results in calling the wrong cleanup function and failing to properly
clean up atmpvc_init().
Fix this by calling atmpvc_exit() in the out_atmpvc_exit error path.
Bluetooth: SMP: Fix not generating mackey and ltk when repairing
The change eed467b517e8 ("Bluetooth: fix passkey uninitialized when used")
introduced a goto that bypasses the creation of temporary mackey and ltk
which are later used by the likes of DHKey Check step.
Later ffee202a78c2 ("Bluetooth: Always request for user confirmation for
Just Works (LE SC)") which means confirm_hint is always set in case
JUST_WORKS so the branch checking for an existing LTK becomes pointless
as confirm_hint will always be set, so this just merge both cases of
malicious or legitimate devices to be confirmed before continuing with the
pairing procedure.
Link: https://github.com/bluez/bluez/issues/1622 Fixes: eed467b517e8 ("Bluetooth: fix passkey uninitialized when used") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to:
usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM)
That function can return NULL in some cases. Even when it returns
NULL, though, we still go on to call btusb_mtk_claim_iso_intf().
As of commit e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for
usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf()
when `btmtk_data->isopkt_intf` is NULL will cause a crash because
we'll end up passing a bad pointer to device_lock(). Prior to that
commit we'd pass the NULL pointer directly to
usb_driver_claim_interface() which would detect it and return an
error, which was handled.
Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check
at the start of the function. This makes the code handle a NULL
`btmtk_data->isopkt_intf` the same way it did before the problematic
commit (just with a slight change to the error message printed).
Reported-by: IncogCyberpunk <incogcyberpunk@proton.me> Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info Fixes: e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()") Cc: stable@vger.kernel.org Tested-by: IncogCyberpunk <incogcyberpunk@proton.me> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pauli Virtanen [Sat, 15 Nov 2025 16:43:55 +0000 (18:43 +0200)]
Bluetooth: hci_core: lookup hci_conn on RX path on protocol side
The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't
ensure hci_conn* is not concurrently modified/deleted. This locking
appears to be leftover from before conn_hash started using RCU
commit bf4c63252490b ("Bluetooth: convert conn hash to RCU")
and not clear if it had purpose since then.
Currently, there are code paths that delete hci_conn* from elsewhere
than the ordered hdev->workqueue where the RX work runs in. E.g.
commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
introduced some of these, and there probably were a few others before
it. It's better to do the locking so that even if these run
concurrently no UAF is possible.
Move the lookup of hci_conn and associated socket-specific conn to
protocol recv handlers, and do them within a single critical section
to cover hci_conn* usage and lookup.
syzkaller has reported a crash that appears to be this issue:
Fixes: 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync") Reported-by: syzbot+d32d77220b92eddd89ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d32d77220b92eddd89ad Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sock: Prevent race in socket write iter and sock bind
There is a potential race condition between sock bind and socket write
iter. bind may free the same cmd via mgmt_pending before write iter sends
the cmd, just as syzbot reported in UAF[1].
Here we use hci_dev_lock to synchronize the two, thereby avoiding the
UAF mentioned in [1].
[1]
syzbot reported:
BUG: KASAN: slab-use-after-free in mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
Read of size 8 at addr ffff888077164818 by task syz.0.17/5989
Call Trace:
mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
set_link_security+0x5c2/0x710 net/bluetooth/mgmt.c:1918
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
sock_write_iter+0x279/0x360 net/socket.c:1195
Fixes: 6fe26f694c82 ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock") Reported-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9aa47cd4633a3cf92a80 Tested-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_core: Fix triggering cmd_timer for HCI_OP_NOP
HCI_OP_NOP means no command was actually sent so there is no point in
triggering cmd_timer which may cause a hdev->reset in the process since
it is assumed that the controller is stuck processing a command.
Fixes: e2d471b7806b ("Bluetooth: ISO: Fix not using SID from adv report") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chris Lu [Wed, 12 Nov 2025 07:53:34 +0000 (15:53 +0800)]
Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface
When performing reset tests and encountering abnormal card drop issues
that lead to a kernel crash, it is necessary to perform a null check
before releasing resources to avoid attempting to release a null pointer.
Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Linus Torvalds [Thu, 20 Nov 2025 16:52:07 +0000 (08:52 -0800)]
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
Michal Luczaj [Wed, 19 Nov 2025 14:02:59 +0000 (15:02 +0100)]
vsock: Ignore signal/timeout on connect() if already established
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
Andrey Vatoropin [Wed, 19 Nov 2025 10:51:12 +0000 (10:51 +0000)]
be2net: pass wrb_params in case of OS2BMC
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Paolo Abeni [Thu, 20 Nov 2025 12:02:00 +0000 (13:02 +0100)]
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
David Bauer [Tue, 18 Nov 2025 00:16:18 +0000 (01:16 +0100)]
l2tp: reset skb control buffer on xmit
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg [Thu, 20 Nov 2025 08:43:24 +0000 (09:43 +0100)]
Merge tag 'rtw-2025-11-20' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw patches for v6.18-rc7
Fix firmware goes wrong and causes device unusable after scanning. This
issue presents under certain regulatory domain reported from end users.
==================
Jakub Kicinski [Thu, 20 Nov 2025 04:10:53 +0000 (20:10 -0800)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-18 (idpf, ice)
This series contains updates to idpf and ice drivers.
Emil adds a check for NULL vport_config during removal to avoid NULL
pointer dereference in idpf.
Grzegorz fixes PTP teardown paths to account for some missed cleanups
for ice driver.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP cleanup on driver removal in error path
idpf: fix possible vport_config NULL pointer deref in remove
====================
Gang Yan [Tue, 18 Nov 2025 07:20:29 +0000 (08:20 +0100)]
selftests: mptcp: add a check for 'add_addr_accepted'
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Gang Yan [Tue, 18 Nov 2025 07:20:28 +0000 (08:20 +0100)]
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
Fix inverted WARN_ON_ONCE condition that prevented normal address
removal counter updates. The current code only executes decrement
logic when the counter is already 0 (abnormal state), while
normal removals (counter > 0) are ignored.
Signed-off-by: Gang Yan <yangang@kylinos.cn> Fixes: 636113918508 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-10-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
selftests: mptcp: join: fastclose: remove flaky marks
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Paolo Abeni [Tue, 18 Nov 2025 07:20:24 +0000 (08:20 +0100)]
mptcp: fix duplicate reset on fastclose
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
Paolo Abeni [Tue, 18 Nov 2025 07:20:23 +0000 (08:20 +0100)]
mptcp: decouple mptcp fastclose from tcp close
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 18 Nov 2025 07:20:22 +0000 (08:20 +0100)]
mptcp: do not fallback when OoO is present
In case of DSS corruption, the MPTCP protocol tries to avoid the subflow
reset if fallback is possible. Such corruptions happen in the receive
path; to ensure fallback is possible the stack additionally needs to
check for OoO data, otherwise the fallback will break the data stream.
Paolo Abeni [Tue, 18 Nov 2025 07:20:21 +0000 (08:20 +0100)]
mptcp: fix premature close in case of fallback
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a11 ("mptcp: close subflow when receiving TCP+FIN") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 18 Nov 2025 07:20:20 +0000 (08:20 +0100)]
mptcp: avoid unneeded subflow-level drops
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Paolo Abeni [Tue, 18 Nov 2025 07:20:19 +0000 (08:20 +0100)]
mptcp: fix ack generation for fallback msk
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Bitterblue Smith [Thu, 13 Nov 2025 22:54:48 +0000 (00:54 +0200)]
wifi: rtw89: hw_scan: Don't let the operating channel be last
Scanning can be offloaded to the firmware. To that end, the driver
prepares a list of channels to scan, including periodic visits back to
the operating channel, and sends the list to the firmware.
When the channel list is too long to fit in a single H2C message, the
driver splits the list, sends the first part, and tells the firmware to
scan. When the scan is complete, the driver sends the next part of the
list and tells the firmware to scan.
When the last channel that fit in the H2C message is the operating
channel something seems to go wrong in the firmware. It will
acknowledge receiving the list of channels but apparently it will not
do anything more. The AP can't be pinged anymore. The driver still
receives beacons, though.
One way to avoid this is to split the list of channels before the
operating channel.
Affected devices:
* RTL8851BU with firmware 0.29.41.3
* RTL8832BU with firmware 0.29.29.8
* RTL8852BE with firmware 0.29.29.8
The commit 57a5fbe39a18 ("wifi: rtw89: refactor flow that hw scan handles channel list")
is found by git blame, but it is actually to refine the scan flow, but not
a culprit, so skip Fixes tag.
Linus Torvalds [Wed, 19 Nov 2025 17:36:04 +0000 (09:36 -0800)]
Merge tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental
overclocking, pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and
memory controller drivers as well as the Tegra memory controller
driver.
Minor updates to the MAINTAINERS file, tee documentation and
defconfigs bring those up to date with recent changes elsewhere"
* tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
MAINTAINERS: sync omap devicetree maintainers with omap platform
MAINTAINERS: Update Krzysztof Kozlowski's email
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
tee: <uapi/linux/tee.h: fix all kernel-doc issues
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
reset: imx8mp-audiomix: Fix bad mask values
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
arm64: defconfig: Fix V3D deferred probe timeout
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
memory: tegra210: Fix incorrect client ids
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
...
Linus Torvalds [Wed, 19 Nov 2025 17:26:09 +0000 (09:26 -0800)]
Merge tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Correct mismatched pwm chip info for adp5585.
Luke Wang found a problem in the pwm-adp5585 driver about how register
information is mapped to the different device variants. This
effectively made the driver non-functional.
That didn't pop up before because the driver change was developed as
part of a bigger mfd series and the original author didn't retest PWM
functionality after it was tested in an earlier revision but then
reworked"
* tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: adp5585: Correct mismatched pwm chip info
Linus Torvalds [Wed, 19 Nov 2025 16:54:58 +0000 (08:54 -0800)]
Merge tag 'hid-for-linus-2025111901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fixes in hid-uclogic, hid-ntrig and hid-playstation
drivers (Abdun Nihaal, Masami Ichikawa)
- regression fix for playback handling in hid-pidff (Tomasz Pakuła)
- initialization fix for some amd_sfh platforms (Mario Limonciello)
- a few assorted device-specific ID additions and quirks
* tag 'hid-for-linus-2025111901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: uclogic: Fix potential memory leak in error path
HID: playstation: Fix memory leak in dualshock4_get_calibration_data()
HID: pidff: Fix needs_playback check
HID: corsair-void: Use %pe for printing PTR_ERR
HID: elecom: Add support for ELECOM M-XT3URBK (018F)
HID: hid-input: Extend Elan ignore battery quirk to USB
HID: hid-ntrig: Prevent memory leak in ntrig_report_version()
HID: amd_sfh: Stop sensor before starting
HID: apple: Add SONiX AK870 PRO to non_apple_keyboards quirk list
HID: lenovo: fixup Lenovo Yoga Slim 7x Keyboard rdesc
HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155
Wei Fang [Mon, 17 Nov 2025 10:29:43 +0000 (18:29 +0800)]
net: phylink: add missing supported link modes for the fixed-link
Pause, Asym_Pause and Autoneg bits are not set when pl->supported is
initialized, so these link modes will not work for the fixed-link. This
leads to a TCP performance degradation issue observed on the i.MX943
platform.
The switch CPU port of i.MX943 is connected to an ENETC MAC, this link
is a fixed link and the link speed is 2.5Gbps. And one of the switch
user ports is the RGMII interface, and its link speed is 1Gbps. If the
flow-control of the fixed link is not enabled, we can easily observe
the iperf performance of TCP packets is very low. Because the inbound
rate on the CPU port is greater than the outbound rate on the user port,
the switch is prone to congestion, leading to the loss of some TCP
packets and requiring multiple retransmissions.
Solving this problem should be as simple as setting the Asym_Pause and
Pause bits. The reason why the Autoneg bit needs to be set, Russell
has gave a very good explanation in the thread [1], see below.
"As the advertising and lp_advertising bitmasks have to be non-empty,
and the swphy reports aneg capable, aneg complete, and AN enabled, then
for consistency with that state, Autoneg should be set. This is how it
was prior to the blamed commit."
Linus Torvalds [Wed, 19 Nov 2025 16:27:05 +0000 (08:27 -0800)]
Merge tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_estimated_nr_free_pages() for soft-reserved memory
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value
than expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to
fix the issue"
* tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM
socket.
The unexpected behaviour is triggered when the peek offset is
larger than the recv queue and the thread is unblocked by new
data.
Let's assume a socket which has "aaaa" in the recv queue and
the peek offset is 4.
First, unix_stream_read_generic() reads the offset 4 and skips
the skb(s) of "aaaa" with the code below:
skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */
do {
...
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
...
skb = skb_peek_next(skb, &sk->sk_receive_queue);
if (!skb)
goto again; /* @skip is 0. */
}
The thread jumps to the 'again' label and goes to sleep since
new data has not arrived yet.
Later, new data "bbbb" unblocks the thread, and the thread jumps
to the 'redo:' label to restart the entire process from the first
skb in the recv queue.
do {
...
redo:
...
last = skb = skb_peek(&sk->sk_receive_queue);
...
again:
if (skb == NULL) {
...
timeo = unix_stream_data_wait(sk, timeo, last,
last_len, freezable);
...
goto redo; /* @skip is 0 !! */
However, the peek offset is not reset in the path.
If the buffer size is 8, recv() will return "aaaabbbb" without
skipping any data, and the final offset will be 12 (the original
offset 4 + peeked skbs' length 8).
After sleeping in unix_stream_read_generic(), we have to fetch the
peek offset again.
Let's move the redo label before mutex_lock(&u->iolock).
Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Reported-by: Miao Wang <shankerwangmiao@gmail.com> Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pradyumn Rahar [Mon, 17 Nov 2025 12:16:08 +0000 (14:16 +0200)]
net/mlx5: Clean up only new IRQ glue on request_irq() failure
The mlx5_irq_alloc() function can inadvertently free the entire rmap
and end up in a crash[1] when the other threads tries to access this,
when request_irq() fails due to exhausted IRQ vectors. This commit
modifies the cleanup to remove only the specific IRQ mapping that was
just added.
This prevents removal of other valid mappings and ensures precise
cleanup of the failed IRQ allocation's associated glue object.
Note: This error is observed when both fwctl and rds configs are enabled.
[1]
mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
general protection fault, probably for non-canonical address
0xe277a58fde16f291: 0000 [#1] SMP NOPTI
Eric Dumazet [Mon, 17 Nov 2025 10:07:44 +0000 (10:07 +0000)]
mptcp: fix a race in mptcp_pm_del_add_timer()
mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer)
while another might have free entry already, as reported by syzbot.
Add RCU protection to fix this issue.
Also change confusing add_timer variable with stop_timer boolean.
syzbot report:
BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616
Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44
1) Misc fixes for xfrm_state creation/modification/deletion.
Patchset from Sabrina Dubroca.
2) Fix inner packet family determination for xfrm offloads.
From Jianbo Liu.
3) Don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path. From Jianbo Liu.
4) Fix memory leaks in xfrm_add_acquire for policy offloads and policy
security contexts. From Zilin Guan.
* tag 'ipsec-2025-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix memory leak in xfrm_add_acquire()
xfrm: Prevent locally generated packets from direct output in tunnel mode
xfrm: Determine inner GSO type from packet inner protocol
xfrm: Check inner packet family directly from skb_dst
xfrm: check all hash buckets for leftover states during netns deletion
xfrm: set err and extack on failure to create pcpu SA
xfrm: call xfrm_dev_state_delete when xfrm_state_migrate fails to add the state
xfrm: make state as DEAD before final put when migrate fails
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
xfrm: drop SA reference in xfrm_state_update if dir doesn't match
====================
Shay Drory [Mon, 17 Nov 2025 12:05:49 +0000 (14:05 +0200)]
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
Grzegorz Nitka [Mon, 20 Oct 2025 10:02:16 +0000 (12:02 +0200)]
ice: fix PTP cleanup on driver removal in error path
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
Fixes: e800654e85b5 ("ice: Use ice_adapter for PTP shared data instead of auxdev") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Arnd Bergmann [Tue, 18 Nov 2025 21:45:25 +0000 (22:45 +0100)]
Merge tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Regulator/supply fixes for a number of boards, removed too fast
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
* tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
arm64: dts: rockchip: Make RK3588 GPU OPP table naming less generic
arm64: dts: rockchip: Drop 'rockchip,grf' prop from tsadc on rk3328
arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576
arm64: dts: rockchip: Fix PCIe power enable pin for BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Set correct pinctrl for I2S1 8ch TX on odroid-m1
Linus Torvalds [Tue, 18 Nov 2025 18:02:22 +0000 (10:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running
without anything set until the first preemption of the vcpu
x86:
- Fix selftests failure on AMD, checking for an optimization that was
not happening anymore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix redundant updates of LBR MSR intercepts
KVM: arm64: VHE: Compute fgt traps before activating them
KVM: arm64: Finalize ID registers only once per VM
Tomasz Pakuła [Mon, 3 Nov 2025 20:02:43 +0000 (21:02 +0100)]
HID: pidff: Fix needs_playback check
A small bug made it's way here when rewriting code to Linux quality.
Currently, if an effect is not infinite and a program requests it's
playback with the same number of loops, the play command won't be fired
and if an effect is infinite, the spam will continue.
We want every playback update for non-infinite effects and only some
for infinite (detecting when a program requests stop with 0 which will
be different than previous value which is usually 1 or 255).
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
Naoki Ueki [Mon, 3 Nov 2025 12:16:45 +0000 (21:16 +0900)]
HID: elecom: Add support for ELECOM M-XT3URBK (018F)
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Yosry Ahmed [Wed, 12 Nov 2025 01:30:17 +0000 (01:30 +0000)]
KVM: SVM: Fix redundant updates of LBR MSR intercepts
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()") Cc: stable@vger.kernel.org Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo] Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 18 Nov 2025 16:38:01 +0000 (17:38 +0100)]
Merge tag 'kvmarm-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.18, take #3
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
Linus Torvalds [Tue, 18 Nov 2025 16:21:27 +0000 (08:21 -0800)]
mm/huge_memory: Fix initialization of huge zero folio
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio") Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/ Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org> Reported-and-tested-by: David Wang <00107082@163.com> Reported-and-tested-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Handle skb allocation failures in RX path, to avoid NULL pointer
dereference and RX stalls under memory pressure. If the refill fails
with -ENOMEM, complete napi polling and wake up later to retry via timer.
Also explicitly re-enable RX DMA after oom, so the dmac doesn't remain
stopped in this situation.
Previously, memory pressure could lead to skb allocation failures and
subsequent Oops like:
Steps to reproduce the issue:
1. Start a continuous network traffic, like scp of a 20GB file
2. Inject failslab errors using the kernel fault injection:
echo -1 > /sys/kernel/debug/failslab/times
echo 30 > /sys/kernel/debug/failslab/interval
echo 100 > /sys/kernel/debug/failslab/probability
3. After some time, traces start to appear, kernel Oopses
and the system stops
Step 2 is not always necessary, as it is usually already triggered by
the transfer of a big enough file.
Pavel Zhigulin [Thu, 13 Nov 2025 11:27:56 +0000 (14:27 +0300)]
net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Lorenzo Bianconi [Thu, 13 Nov 2025 17:19:38 +0000 (18:19 +0100)]
net: airoha: Do not loopback traffic to GDM2 if it is available on the device
Airoha_eth driver forwards offloaded uplink traffic (packets received
on GDM1 and forwarded to GDM{3,4}) to GDM2 in order to apply hw QoS.
This is correct if the device does not support a dedicated GDM2 port.
In this case, in order to enable hw offloading for uplink traffic,
the packets should be sent to GDM{3,4} directly.
Ido Schimmel [Sun, 16 Nov 2025 08:10:29 +0000 (10:10 +0200)]
selftests: net: lib: Do not overwrite error messages
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer.
Fixes: 0c0b20587b9f25a2 ("s390/ctcm: fix potential memory leak") Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com> Signed-off-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com> Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 17 Nov 2025 17:11:27 +0000 (09:11 -0800)]
Merge tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix unitialized variable in statmount_string()
- Fix hostfs mounting when passing host root during boot
- Fix dynamic lookup to fail on cell lookup failure
- Fix missing file type when reading bfs inodes from disk
- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly
- Restore write access before closing files opened by open_exec() in
binfmt_misc
- Always freeze efivarfs during suspend/hibernate cycles
- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids
- Fix tmpfs remount when noswap is specified
- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()
- Remove dead node_to_mnt_ns() code
- Ensure that per-queue kobjects are successfully created
* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()
Linus Torvalds [Mon, 17 Nov 2025 17:01:22 +0000 (09:01 -0800)]
Merge tag 'sched_ext-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"Five fixes addressing PREEMPT_RT compatibility and locking issues.
Three commits fix potential deadlocks and sleeps in atomic contexts on
RT kernels by converting locks to raw spinlocks and ensuring IRQ work
runs in hard-irq context. The remaining two fix unsafe locking in the
debug dump path and a variable dereference typo"
* tag 'sched_ext-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize rq->scx.kick_cpus_irq_work
sched_ext: Fix possible deadlock in the deferred_irq_workfn()
sched/ext: convert scx_tasks_lock to raw spinlock
sched_ext: Fix unsafe locking in the scx_dump_state()
sched_ext: Fix use of uninitialized variable in scx_bpf_cpuperf_set()
Linus Torvalds [Mon, 17 Nov 2025 16:57:21 +0000 (08:57 -0800)]
Merge tag 'mtd/fixes-for-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Mostly small misc fixes, here they are sorted by sub-subsystem:
ECC fixes:
- Realtek Kconfig fix
SPI NAND fixes:
- Remove nonexistent QE bit on FMSH FM25S01A
Raw NAND fixes:
- Prevent DMA device NULL pointer dereference in Cadence driver
MTD device fixes:
- Possible integer overflow in read/write ioctls
- Fix the IRQ handler pointer in the onenand driver, even if in
practice it is never dereferenced.
* tag 'mtd/fixes-for-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: Pass correct pointer to IRQ handler
mtd: spinand: fmsh: remove QE bit for FM25S01A flash
mtd: rawnand: cadence: fix DMA device NULL pointer dereference
mtd: rawnand: realtek: Make rtl_ecc_engine_ops const
mtd: nand: MTD_NAND_ECC_REALTEK should depend on HAS_DMA
mtd: nand: realtek-ecc: Fix a IS_ERR() vs NULL bug in probe
mtdchar: fix integer overflow in read/write ioctls
can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling
Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
to be reset. If we ever reach the condition of handling more than
`SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop body.
This may, among other issues, cause us to never `netif_wake_queue()` again
after a transmission interrupt.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Cc: stable@vger.kernel.org Co-developed-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patch.msgid.link/20251116-sun4i-fix-loop-v1-1-3d76d3f81950@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Merge patch series "can: gs_usb: fix USB bulk in and out callbacks"
Marc Kleine-Budde <mkl@pengutronix.de> says:
The bulk-out callback gs_usb_xmit_callback() does not take care of the
cleanup of failed transfers of URBs. The 1st patch adds the missing
cleanup.
The bulk-in callback gs_usb_receive_bulk_callback() accesses the buffer of
the URB without checking how much data has actually been received. The last
2 patches fix this problem.
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data
The URB received in gs_usb_receive_bulk_callback() contains a struct
gs_host_frame. The length of the data after the header depends on the
gs_host_frame hf::flags and the active device features (e.g. time
stamping).
Introduce a new function gs_usb_get_minimum_length() and check that we have
at least received the required amount of data before accessing it. Only
copy the data to that skb that has actually been received.
Zqiang [Mon, 17 Nov 2025 12:53:10 +0000 (20:53 +0800)]
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize rq->scx.kick_cpus_irq_work
For PREEMPT_RT kernels, the kick_cpus_irq_workfn() be invoked in
the per-cpu irq_work/* task context and there is no rcu-read critical
section to protect. this commit therefore use IRQ_WORK_INIT_HARD() to
initialize the per-cpu rq->scx.kick_cpus_irq_work in the
init_sched_ext_class().
projects / thirdparty / linux.git / log
