The function sdm845_slim_snd_hw_params() calls the functuion
snd_soc_dai_set_channel_map() but does not check its return
value. A proper implementation can be found in msm_snd_hw_params().
Add error handling for snd_soc_dai_set_channel_map(). If the
function fails and it is not a unsupported error, return the
error code immediately.
Fixes: 5caf64c633a3 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga") Cc: stable@vger.kernel.org # v5.6 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250519075739.1458-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the msleep_interruptible() out of the non-sleepable
context by moving the ls->ls_recover_spin spinlock around so
msleep_interruptible() will be called in a sleepable context.
Cc: stable@vger.kernel.org Fixes: 4a7727725dc7 ("GFS2: Fix recovery issues for spectators") Suggested-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver tries to chain requests together before submitting them
to hardware in order to reduce completion interrupts.
However, it even extends chains that have already been submitted
to hardware. This is dangerous because there is no way of knowing
whether the hardware has already read the DMA memory in question
or not.
Fix this by splitting the chain list into two. One for submitted
requests and one for requests that have not yet been submitted.
Only extend the latter.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com> Fixes: 85030c5168f1 ("crypto: marvell - Add support for chaining crypto requests in TDMA mode") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
populate_attrs() may override failure for creating attribute files
by success for creating subsequent bin attribute files, and have
wrong return value.
Fix by creating bin attribute files under successfully creating
attribute files.
Fixes: 03607ace807b ("configfs: implement binary attributes") Cc: stable@vger.kernel.org Reviewed-by: Joel Becker <jlbec@evilplan.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250507-fix_configfs-v3-2-fe2d96de8dc4@quicinc.com Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My prior cleanup missed that tcp_data_ready() has to look at SOCK_DONE.
Otherwise, an application using SO_RCVLOWAT will not get EPOLLIN event
if a FIN is received in the middle of expected payload.
The reason SOCK_DONE is not examined in tcp_epollin_ready()
is that tcp_poll() catches the FIN because tcp_fin()
is also setting RCV_SHUTDOWN into sk->sk_shutdown
Fixes: 05dc72aba364 ("tcp: factorize logic into tcp_epollin_ready()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Arjun Roy <arjunroy@google.com> Reviewed-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
If we sanitize error returns, the debug statements need
to come before that so that we don't lose information.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 405b0d610745 ("net: usb: aqc111: fix error handling of usbnet read calls") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped") Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/87wmdceom2.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b89a. We need to do the same for
dm_op. This resolves the problem.
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
drm/amd/display: Do not add '-mhard-float' to dcn2{1,0}_resource.o for clang
This patch is for linux-5.15.y and earlier only. It is functionally
equivalent to upstream commit 7db038d9790e ("drm/amd/display: Do not add
'-mhard-float' to dml_ccflags for clang"), which was created after all
files that require '-mhard-float' were moved under the dml folder. In
kernels older than 5.18, which do not contain upstream commits
22f87d998326 ("drm/amd/display: move FPU operations from dcn21 to dml/dcn20 folder") cf689e869cf0 ("drm/amd/display: move FPU-related code from dcn20 to dml folder")
After commit feb843a469fb ("kbuild: add $(CLANG_FLAGS) to
KBUILD_CPPFLAGS"), there is an error while building certain PowerPC
assembly files with clang:
arch/powerpc/lib/copypage_power7.S: Assembler messages:
arch/powerpc/lib/copypage_power7.S:34: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:35: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:37: Error: junk at end of line: `0b01000'
arch/powerpc/lib/copypage_power7.S:38: Error: junk at end of line: `0b01010'
arch/powerpc/lib/copypage_power7.S:40: Error: junk at end of line: `0b01010'
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
as-option only uses KBUILD_AFLAGS, so after removing CLANG_FLAGS from
KBUILD_AFLAGS, there is no more '--target=' or '--prefix=' flags. As a
result of those missing flags, the host target
will be tested during as-option calls and likely fail, meaning necessary
flags may not get added when building assembly files, resulting in
errors like seen above.
Add KBUILD_CPPFLAGS to as-option invocations to clear up the errors.
This should have been done in commit d5c8d6e0fa61 ("kbuild: Update
assembler calls to use proper flags and language target"), which
switched from using the assembler target to the assembler-with-cpp
target, so flags that affect preprocessing are passed along in all
relevant tests. as-option now mirrors cc-option.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following errors appear multiple times when
building ARCH=powerpc powernv_defconfig:
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12d4): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717520 is not in [-2147483648, 2147483647]; references '__start___soft_mask_table'
ld.lld: error: vmlinux.a(arch/powerpc/kernel/head_64.o):(.text+0x12e8): relocation R_PPC64_ADDR16_HI out of range: -4611686018409717392 is not in [-2147483648, 2147483647]; references '__stop___soft_mask_table'
Diffing the .o.cmd files reveals that -DHAVE_AS_ATHIGH=1 is not present
anymore, because as-instr only uses KBUILD_AFLAGS, which will no longer
contain '--target'.
Mirror Kconfig's as-instr and add CLANG_FLAGS explicitly to the
invocation to ensure the target information is always present.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building ARCH=mips
with clang (tip of tree error shown):
clang: error: unsupported option '-mabi=' for target 'x86_64-pc-linux-gnu'
Add KBUILD_CPPFLAGS in the CHECKFLAGS invocation to keep everything
working after the move.
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Similar to commit 84edc2eff827 ("selftest/fpu: avoid clang warning"),
just add this flag to GCC builds. Commit 0f0727d971f6 ("drm/amd/display:
readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP
routines") added '-msse2' to prevent clang from emitting software
floating point routines.
Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Move '-Wa,-msoft-float' check from as-option to cc-option
This patch is for linux-6.1.y and earlier, it has no direct mainline
equivalent.
In order to backport commit d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target") to resolve a separate
issue regarding PowerPC, the problem noticed and fixed by
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT") needs to be addressed. Unfortunately, 6.1 and
earlier do not contain commit e4412739472b ("Documentation: raise
minimum supported version of binutils to 2.25"), so it cannot be assumed
that all supported versions of GNU as have support for -msoft-float.
In order to switch from KBUILD_CFLAGS to KBUILD_AFLAGS in as-option
without consequence, move the '-Wa,-msoft-float' check to cc-option,
including '$(cflags-y)' directly to avoid the issue mentioned in
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT").
as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.
This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
est_qlen_notify() deletes its class from its active list with
list_del() when qlen is 0, therefore, it is not idempotent and
not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: d92adacdd8c2 ("net_sched: ets: fix a race in ets_qdisc_change()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When performing a C22 operation, check that the bus driver actually
provides the methods, and return -EOPNOTSUPP if not. C45 only busses
do exist, and in future their C22 methods will be NULL.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0e629694126c ("net/mdiobus: Fix potential out-of-bounds read/write access") Signed-off-by: Sasha Levin <sashal@kernel.org>
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The proto ops ->stream_memory_read() is currently only used
by TCP to check whether psock queue is empty or not. We need
to rename it before reusing it for non-TCP protocols, and
adjust the exsiting users accordingly.
As suggested by John, clean up sockmap related Kconfigs:
Reduce the scope of CONFIG_BPF_STREAM_PARSER down to TCP stream
parser, to reflect its name.
Make the rest sockmap code simply depend on CONFIG_BPF_SYSCALL
and CONFIG_INET, the latter is still needed at this point because
of TCP/UDP proto update. And leave CONFIG_NET_SOCK_MSG untouched,
as it is used by non-sockmap cases.
Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20210223184934.6054-2-xiyou.wangcong@gmail.com
Stable-dep-of: 2660a544fdc0 ("net: Fix TOCTOU issue in sk_is_readable()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Both tcp_data_ready() and tcp_stream_is_readable() share the same logic.
Add tcp_epollin_ready() helper to avoid duplication.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2660a544fdc0 ("net: Fix TOCTOU issue in sk_is_readable()") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com> Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com> Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API") Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The pseries platform will share vas and nx code and interfaces
with the PowerNV platform, so create the
arch/powerpc/platforms/book3s/ directory and move VAS API code
there. Functionality is not changed.
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
Tested:
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().
We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.
This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.
Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It happened "Kernel panic - not syncing: hung_task: blocked tasks" when
test simulate crash and ifconfig down/rmmod meanwhile.
Test steps:
1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC.
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio
echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci
2. dmesg:
[ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash
[ 5622.655995] ieee80211 phy0: Hardware restart was requested
[ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds.
[ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds.
[ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks
[ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G W 4.19.86 #137
[ 5776.359846] Hardware name: MediaTek krane sku176 board (DT)
[ 5776.359855] Call trace:
[ 5776.359868] dump_backtrace+0x0/0x170
[ 5776.359881] show_stack+0x20/0x2c
[ 5776.359896] dump_stack+0xd4/0x10c
[ 5776.359916] panic+0x12c/0x29c
[ 5776.359937] hung_task_panic+0x0/0x50
[ 5776.359953] kthread+0x120/0x130
[ 5776.359965] ret_from_fork+0x10/0x18
[ 5776.359986] SMP: stopping secondary CPUs
[ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000
[ 5776.360026] CPU features: 0x0,2188200c
[ 5776.360035] Memory Limit: none
The test command run simulate_fw_crash firstly and it call into
ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable
is called and bit NAPI_STATE_SCHED is set. After that, function
ath10k_sdio_hif_stop is called again from ath10k_stop by command
"ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked.
It is blocked by napi_synchronize, napi_disable will set bit with
NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop
becuase bit NAPI_STATE_SCHED is set by napi_disable.
function of napi_synchronize
static inline void napi_synchronize(const struct napi_struct *n)
{
if (IS_ENABLED(CONFIG_SMP))
while (test_bit(NAPI_STATE_SCHED, &n->state))
msleep(1);
else
barrier();
}
function of napi_disable
void napi_disable(struct napi_struct *n)
{
might_sleep();
set_bit(NAPI_STATE_DISABLE, &n->state);
while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
msleep(1);
while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
msleep(1);
When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very easy to break the 1st restart work and lead
recovery fail.
Add a flag to allow only one restart work running untill
device successfully recovered.
It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this
flag again, because it is clear in ath10k_core_start. The function
ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do
many things and drv_start(call to ath10k_core_start) is 1st thing,
when drv_start complete, it does not mean restart complete. So it
add new flag and clear it in ath10k_reconfig_complete, because it
is the last thing called from drv_reconfig_complete of function
ieee80211_reconfig, after it, the restart process finished.
The early_console_setup() function initializes sci_ports[0].port with an
object of type struct uart_port obtained from the struct earlycon_device
passed as an argument to early_console_setup().
Later, during serial port probing, the serial port used as earlycon
(e.g., port A) might be remapped to a different position in the sci_ports[]
array, and a different serial port (e.g., port B) might be assigned to slot
0. For example:
sci_ports[0] = port B
sci_ports[X] = port A
In this scenario, the new port mapped at index zero (port B) retains the
data associated with the earlycon configuration. Consequently, after the
Linux boot process, any access to the serial port now mapped to
sci_ports[0] (port B) will block the original earlycon port (port A).
To address this, introduce an early_console_exit() function to clean up
sci_ports[0] when earlycon is exited.
To prevent the cleanup of sci_ports[0] while the serial device is still
being used by earlycon, introduce the struct sci_port::probing flag and
account for it in early_console_exit().
Relocate the runtime PM enable operation to sci_probe_single(). This change
prepares the codebase for upcoming fixes.
While at it, replace the existing logic with a direct call to
devm_pm_runtime_enable() and remove sci_cleanup_single(). The
devm_pm_runtime_enable() function automatically handles disabling runtime
PM during driver removal.
On the Renesas RZ/G3S, when doing suspend to RAM, the uart_suspend_port()
is called. The uart_suspend_port() calls 3 times the
struct uart_port::ops::tx_empty() before shutting down the port.
According to the documentation, the struct uart_port::ops::tx_empty()
API tests whether the transmitter FIFO and shifter for the port is
empty.
The Renesas RZ/G3S SCIFA IP reports the number of data units stored in the
transmit FIFO through the FDR (FIFO Data Count Register). The data units
in the FIFOs are written in the shift register and transmitted from there.
The TEND bit in the Serial Status Register reports if the data was
transmitted from the shift register.
In the previous code, in the tx_empty() API implemented by the sh-sci
driver, it is considered that the TX is empty if the hardware reports the
TEND bit set and the number of data units in the FIFO is zero.
According to the HW manual, the TEND bit has the following meaning:
0: Transmission is in the waiting state or in progress.
1: Transmission is completed.
It has been noticed that when opening the serial device w/o using it and
then switch to a power saving mode, the tx_empty() call in the
uart_port_suspend() function fails, leading to the "Unable to drain
transmitter" message being printed on the console. This is because the
TEND=0 if nothing has been transmitted and the FIFOs are empty. As the
TEND=0 has double meaning (waiting state, in progress) we can't
determined the scenario described above.
Add a software workaround for this. This sets a variable if any data has
been sent on the serial console (when using PIO) or if the DMA callback has
been called (meaning something has been transmitted). In the tx_empty()
API the status of the DMA transaction is also checked and if it is
completed or in progress the code falls back in checking the hardware
registers instead of relying on the software variable.
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de> Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3d010c8031e3 ("udp: do not accept non-tunnel GSO skbs landing
in a tunnel") added checks in linux stack to not accept non-tunnel
GRO packets landing in a tunnel. This exposed an issue in vmxnet3
which was not correctly reporting GRO packets for tunnel packets.
This patch fixes this issue by setting correct GSO type for the
tunnel packets.
Currently, vmxnet3 does not support reporting inner fields for LRO
tunnel packets. The issue is not seen for egress drivers that do not
use skb inner fields. The workaround is to enable tnl-segmentation
offload on the egress interfaces if the driver supports it. This
problem pre-exists this patch fix and can be addressed as a separate
future patch.
Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com> Acked-by: Guolin Yang <guolin.yang@broadcom.com> Link: https://patch.msgid.link/20250530152701.70354-1-ronak.doshi@broadcom.com
[pabeni@redhat.com: dropped the changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support") Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270 Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "freq" variable is in terms of MHz and "max_val_cycles" is in terms
of Hz. The fact that "max_val_cycles" is a u64 suggests that support
for high frequency is intended but the "freq_khz * 1000" would overflow
the u32 type if we went above 4GHz. Use unsigned long long type for the
mutliplication to prevent that.
Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/aDbFHe19juIJKjsb@stanley.mountain Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Identify the cause of the suspend/resume hang: netif_carrier_off()
is called during link state changes and becomes stuck while
executing linkwatch_work().
To resolve this issue, call netif_device_detach() during the Ethernet
suspend process to temporarily detach the network device from the
kernel and prevent the suspend/resume hang.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Yanqing Wang <ot_yanqing.wang@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Biao Huang <biao.huang@mediatek.com> Link: https://patch.msgid.link/20250528075351.593068-1-macpaul.lin@mediatek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported a refcount warning [1] caused by calling get_net() on
a network namespace that is being destroyed (refcount=0). This happens
when a TIPC discovery timer fires during network namespace cleanup.
The recently added get_net() call in commit e279024617134 ("net/tipc:
fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to
hold a reference to the network namespace. However, if the namespace
is already being destroyed, its refcount might be zero, leading to the
use-after-free warning.
Replace get_net() with maybe_get_net(), which safely checks if the
refcount is non-zero before incrementing it. If the namespace is being
destroyed, return -ENODEV early, after releasing the bearer reference.
Previously, the RX_BUFFERS_POSTED stat incorrectly reported the
fill_cnt from RX queue 0 for all queues, resulting in inaccurate
per-queue statistics.
Fix this by correctly indexing priv->rx[idx].fill_cnt for each RX queue.
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250527130830.1812903-1-alok.a.tiwari@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.
This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.
This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.
Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.
Fixes: 25c83b5c2e82 ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710") Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver") Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB}
and for sinc3 the factor is 0.272 according to the data sheets for
ad7124-4 (Rev. E.) and ad7124-8 (Rev. F).
Reorder the initialization sequence in `usbhs_probe()` to enable runtime
PM before accessing registers, preventing potential crashes due to
uninitialized clocks.
Currently, in the probe path, registers are accessed before enabling the
clocks, leading to a synchronous external abort on the RZ/V2H SoC.
The problematic call flow is as follows:
Since `iowrite16()` is performed without ensuring the required clocks are
enabled, this can lead to access errors. To fix this, enable PM runtime
early in the probe function and ensure clocks are acquired before register
access, preventing crashes like the following on RZ/V2H:
has a signed left-hand side and an unsigned right-hand side.
So the comparison might become true for negative start_secs which is
interpreted as a (possibly very large) positive value.
As a negative value can never be bigger than an unsigned value
the correct representation of the (mathematical) comparison
Previously the struct aer_err_info "info" was allocated on the stack
without being initialized, so it contained junk except for the fields we
explicitly set later.
Initialize "info" at declaration so it starts as all zeros.
Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250522232339.1525671-2-helgaas@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Reviewed-by: Nathan Lynch <nathan.lynch@amd.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20250402023900.43440-1-bsdhenrymartin@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the call to pci_host_probe() in cdns_pcie_host_setup() fails, PM
runtime count is decremented in the error path using pm_runtime_put_sync().
But the runtime count is not incremented by this driver, but only by the
callers (cdns_plat_pcie_probe/j721e_pcie_probe). And the callers also
decrement the runtime PM count in their error path. So this leads to the
below warning from the PM core:
"runtime PM usage count underflow!"
So fix it by getting rid of pm_runtime_put_sync() in the error path and
directly return the errno.
The DT bindings for this driver define the interrupts in the order as
they are numbered in the interrupt controller. The old platform_data,
however, listed them in a different order. So, for DT based platforms,
they are mixed up. Assign them specifically for DT, so we can keep the
bindings stable. After the fix, 'rtctest' passes again on the Renesas
Genmai board (RZ-A1 / R7S72100).
In some scenarios, when mounting NFS, more than one superblock may be
created. The final superblock used is the last one created, but only the
first superblock carries the ro flag passed from user space. If a ro flag
is added to the superblock via remount, it will trigger the issue
described in Link[1].
Link[2] attempted to address this by marking the superblock as ro during
the initial mount. However, this introduced a new problem in scenarios
where multiple mount points share the same superblock:
[root@a ~]# mount /dev/sdb /mnt/sdb
[root@a ~]# echo "/mnt/sdb *(rw,no_root_squash)" > /etc/exports
[root@a ~]# echo "/mnt/sdb/test_dir2 *(ro,no_root_squash)" >> /etc/exports
[root@a ~]# systemctl restart nfs-server
[root@a ~]# mount -t nfs -o rw 127.0.0.1:/mnt/sdb/test_dir1 /mnt/test_mp1
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (rw,relatime,...
[root@a ~]# mount -t nfs -o ro 127.0.0.1:/mnt/sdb/test_dir2 /mnt/test_mp2
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (ro,relatime,...
127.0.0.1:/mnt/sdb/test_dir2 on /mnt/test_mp2 type nfs4 (ro,relatime,...
[root@a ~]#
When mounting the second NFS, the shared superblock is marked as ro,
causing the previous NFS mount to become read-only.
To resolve both issues, the ro flag is no longer applied to the superblock
during remount. Instead, the ro flag on the mount is used to control
whether the mount point is read-only.
Fixes: 281cad46b34d ("NFS: Create a submount rpc_op")
Link[1]: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Link[2]: https://lore.kernel.org/all/20241130035818.1459775-1-lilingfeng3@huawei.com/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the link, commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when
mounting nfs") removed the check for the ro flag when determining whether
to share the superblock, which caused issues when mounting different
subdirectories under the same export directory via NFSv3. However, this
change did not affect NFSv4.
For NFSv3:
1) A single superblock is created for the initial mount.
2) When mounted read-only, this superblock carries the SB_RDONLY flag.
3) Before commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs"):
Subsequent rw mounts would not share the existing ro superblock due to
flag mismatch, creating a new superblock without SB_RDONLY.
After the commit:
The SB_RDONLY flag is ignored during superblock comparison, and this leads
to sharing the existing superblock even for rw mounts.
Ultimately results in write operations being rejected at the VFS layer.
For NFSv4:
1) Multiple superblocks are created and the last one will be kept.
2) The actually used superblock for ro mounts doesn't carry SB_RDONLY flag.
Therefore, commit 52cb7f8f1778 doesn't affect NFSv4 mounts.
Clear SB_RDONLY before getting superblock when NFS_MOUNT_UNSHARED is not
set to fix it.
Fixes: 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs") Closes: https://lore.kernel.org/all/12d7ea53-1202-4e21-a7ef-431c94758ce5@app.fastmail.com/T/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The test might fail on the Arm64 platform with the error:
# perf test -vvv "Track with sched_switch"
Missing sched_switch events
#
The issue is caused by incorrect handling of timestamp comparisons. The
comparison result, a signed 64-bit value, was being directly cast to an
int, leading to incorrect sorting for sched events.
The case does not fail everytime, usually I can trigger the failure
after run 20 ~ 30 times:
# while true; do perf test "Track with sched_switch"; done
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
106: Track with sched_switch : FAILED!
106: Track with sched_switch : Ok
106: Track with sched_switch : Ok
I used cross compiler to build Perf tool on my host machine and tested on
Debian / Juno board. Generally, I think this issue is not very specific
to GCC versions. As both internal CI and my local env can reproduce the
issue.
# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm
Fix this by explicitly returning 0, 1, or -1 based on whether the result
is zero, positive, or negative.
Fixes: d44bc558297222d9 ("perf tests: Add a test for tracking with sched_switch") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: James Clark <james.clark@linaro.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250331172759.115604-1-leo.yan@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The script allows the user to enter patterns to find symbols.
The pattern matching characters are converted for use in SQL.
For PostgreSQL the conversion involves using the Python maketrans()
method which is slightly different in Python 3 compared with Python 2.
Fix to work in Python 3.
Fixes: beda0e725e5f06ac ("perf script python: Add Python3 support to exported-sql-viewer.py") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tony Jones <tonyj@suse.de> Link: https://lore.kernel.org/r/20250512093932.79854-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org> Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct
perf_hpp_list") it assumes that act->thread is set prior to calling
do_zoom_thread().
This doesn't happen when we use ESC or the Left arrow key to Zoom out of
a specific thread, making this operation not to work and we get stuck
into the thread zoom.
In 6422184b087ff435 ("perf hists browser: Simplify zooming code using
pstack_peek()") it says no need to set actions->thread, and at that
point that was true, but in 7cecb7fe8388d5c3 a actions->thread == NULL
check was added before the zoom out of thread could kick in.
We can zoom out using the alternative 't' thread zoom toggle hotkey to
finally set actions->thread before calling do_zoom_thread() and zoom
out, but lets also fix the ESC/Zoom out of thread case.
Fixes: 7cecb7fe8388d5c3 ("perf hists: Move sort__has_comm into struct perf_hpp_list") Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/Z_TYux5fUg2pW-pF@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: c7a14fdcb3fa7736 ("perf build-ids: Fall back to debuginfod query if debuginfo not found") Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
devm_kasprintf() returns NULL when memory allocation fails. Currently,
aspeed_lpc_enable_snoop() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250401074647.21300-1-bsdhenrymartin@gmail.com
[arj: Fix Fixes: tag to use subject from 3772e5da4454] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
In preparation for writing logs, in nilfs_btree_propagate(), which makes
parent and ancestor node blocks dirty starting from a modified data block
or b-tree node block, if the starting block does not belong to the b-tree,
i.e. is isolated, nilfs_btree_do_lookup() called within the function
fails with -ENOENT.
In this case, even though -ENOENT is an internal code, it is propagated to
the log writer via nilfs_bmap_propagate() and may be erroneously returned
to system calls such as fsync().
Fix this issue by changing the error code to -EINVAL in this case, and
having the bmap layer detect metadata corruption and convert the error
code appropriately.
Link: https://lkml.kernel.org/r/20250428173808.6452-3-konishi.ryusuke@gmail.com Fixes: 1f5abe7e7dbc ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "nilfs2: improve sanity checks in dirty state propagation".
This fixes one missed check for block mapping anomalies and one improper
return of an error code during a preparation step for log writing, thereby
improving checking for filesystem corruption on writeback.
This patch (of 2):
In nilfs_direct_propagate(), the printer get from nilfs_direct_get_ptr()
need to be checked to ensure it is not an invalid pointer.
If the pointer value obtained by nilfs_direct_get_ptr() is
NILFS_BMAP_INVALID_PTR, means that the metadata (in this case, i_bmap in
the nilfs_inode_info struct) that should point to the data block at the
buffer head of the argument is corrupted and the data block is orphaned,
meaning that the file system has lost consistency.
Add a value check and return -EINVAL when it is an invalid pointer.
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.
Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
