Avoid using prototypes when not necessary (it is already defined in the header
file).
Make log_match_char_tree() static to main/pbx.c (only used there).
Kevin P. Fleming [Thu, 21 May 2009 21:13:09 +0000 (21:13 +0000)]
Const-ify the world (or at least a good part of it)
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
This commit prevents cdr records with AST_CDR_FLAG_ANSLOCKED and AST_CDR_FLAG_LOCKED from being updated in certain cases.
This is accomplished by adding two functions to update the answer time and disposition of calls that checks for the proper lock flags. These functions are used in the ast_bridge_call() function so that ForkCDR(A) calls are respected.
This patch also modifies the way ast_bridge_call() chooses the cdr record to base the bridged_cdr on. Previously the first unlocked cdr record would be chosen, now instead the first cdr record is chosen and forked cdr records are moved to the bridge_cdr. This allows the original cdr record and any forked cdr records to be properly updated with answer and end times.
Mark Michelson [Wed, 20 May 2009 20:45:05 +0000 (20:45 +0000)]
Get rid of some duplicated code and correct a connected line error.
When receiving a 200 OK response to an INVITE, it was possible to transmit two
connected line updates instead of a single one. Furthermore, the second did not
have the proper information present.
Now the two have been combined into a single update and the correct information
is presented.
Mark Michelson [Wed, 20 May 2009 20:14:28 +0000 (20:14 +0000)]
Plug a memory leak in app_dial.
Since we may have copied connected line info into the chanlist struct prior
to placing an outbound call, we need to be sure to free the allocated data
when we hang the call up.
Mark Michelson [Tue, 19 May 2009 20:59:38 +0000 (20:59 +0000)]
Add basic support for handling connected line-related UPDATE requests.
SIP purists may want to look the other way...
When COLP/CONP support for SIP was committed, there was a condition under
which Asterisk may transmit a SIP UPDATE in order to communicate the change
in connected line information. The issue here is that while we could send a
SIP UPDATE message, we were not prepared to receive such an UPDATE and would
always responde with a 501 when we received an UPDATE.
The situation was a bit rough. We really want to be able to receive UPDATEs
having to do with connected line changes, but the amount of effort involved
in properly supporting RFC 3311 was staggering. This commit represents a
compromise.
First, it was decided that it is important to only send a SIP UPDATE to
an endpoint that is able to handle one. So, now we have added parsing of
the Allow header into SIP. We store the allowed methods on SIP peers so
that when we communicate with them, we already will know what we can and
cannot send to them. We will parse the peer's allowed methods when he registers
with us. If the peer is not the type to register with us, but the qualify option
is enabled, then we will use the response to the OPTIONS request we send
the peer to determine the peer's allowed methods. When the peer's registration
expires, or when qualify deems the peer to be unreachable, we clear the allowed
methods from the peer.
For an actual call, we will copy the peer's allowed methods to the sip_pvt
representing the call leg. If we are communicating with an endpoint which is
not a peer, then we will just parse the Allow header from the first message
we receive during the call and store the information in the sip_pvt.
If, during communication with a peer, we receive a 501 response, then we will
make sure to save the fact that we cannot use that method when communicating
with that peer.
Now, with all that infrastructure in place, the only actual place we use this
information currently is when attempting to send a connected line change using
an UPDATE request. If we cannot send the change immediately using an UPDATE,
we will set the SIP_NEEDREINVITE flag so that we can send a REINVITE as soon
as it is allowed.
The second part of the changes here is for Asterisk to accept UPDATE requests
that have connected line changes. Since we are not fully supporting RFC 3311,
Asterisk will NOT place the UPDATE method in Allow headers it sends. Instead,
if you are communicating with what you know to be another Asterisk box, you may
set the rpid_update parameter in sip.conf so that we will send UPDATEs to that
Asterisk box. When we send a connected line update, we set a custom header
called "X-Asterisk-rpid-update."
On the receiving end, if Asterisk receives an UPDATE that does not have the
"X-Asterisk-rpid-update" header present, then Asterisk will respond with a 501
since media-changing UPDATEs are not supported. We should never get such
UPDATEs, since as was stated earlier, Asterisk does not put UPDATE in its Allow
header. If the custom header is present in the received UPDATE, though, then we
will check the incoming request for connected line updates and queue the update
on the channel where the change occurred.
Add a similar dependency on SMDI for voicemail as already exists for ADSI.
(closes issue #14846)
Reported by: pj
Patches:
20090413__bug14846__1.4.diff.txt uploaded by tilghman (license 14)
20090507__issue14846__1.6.0.diff.txt uploaded by tilghman (license 14)
20090507__issue14846__1.6.1.diff.txt uploaded by tilghman (license 14)
........
Fix the CLI command 'manager show command' documentation and functionality.
The CLI command 'manager show command' supports passing multiple action names in
the same line, but it was not allowing that because of a incorrect check in the
argumentes counter. Also the documentation was updated to show that this usage
of the command is possible.
Avoid autocompleting passed the action name argument in the CLI command.
When running the autocomplete of the CLI command 'manager show command <action>'
it was autocompleting everything else after the <action> argument, giving an error,
because this command doesn't support multiple AMI action names at a time.
Tilghman Lesher [Mon, 18 May 2009 19:17:15 +0000 (19:17 +0000)]
Move the spawn of astcanary down, until after the call to daemon(3).
This avoids possible conflicts with the internal implementation of
daemon(3).
(closes issue #15093)
Reported by: tzafrir
Patches:
20090513__issue15093__2.diff.txt uploaded by tilghman (license 14)
Tested by: tzafrir
Mark Michelson [Mon, 18 May 2009 18:58:26 +0000 (18:58 +0000)]
Fix externalivr's setvariable command so that it properly sets multiple variables.
The command had a for loop that was guaranteed to only execute once since
the continuation operation of the loop would set the input buffer NULL. I rewrote
the loop so that its operation was more obvious, and it would set multiple variables
correctly.
I also reduced stack space required for the function, constified the input string,
and modified the function so that it would not modify the input string while I was
at it.
Sean Bright [Mon, 18 May 2009 14:54:43 +0000 (14:54 +0000)]
Allow cdr_custom to write to multiple files instead of just one.
Up to now, cdr_custom would only accept a single filename/format from
cdr_custom.conf. This change allows you to specify multiple filename
& format directives.
Allow to include sections of other parts of the xml documentation.
Avoid duplicating xml documentation by allowing to include other parts of
the xml documentation using XInclude.
Example:
<xi:include xpointer="xpointer(/docs/function[@name='CHANNEL']/synopsis)" />
(Insert this line to include the synopsis of the CHANNEL function xml
documentation).
It is also possible to include documentation from other files in the
'documentation/' directory using the href="" attribute inside a xinclude
element.
Fix a missing unlock in case of error, and a missing free().
Always free the allocated memory for a string field, because
we are always using it (not only when xmldocs are enabled).
Also if there is an error allocating memory for the string field
remember to unlock the list of registered applications, before returning.
IAX was not sending REGREJ to terminate invalid registrations. Instead it sent another REGAUTH if the authentication challenge failed. This caused a loop of REGREQ and REGAUTH frames.
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
It was not possible to use an enumlist inside an enum:
<enumlist>
<enum name="aa">
<enumlist>
...
</enumlist>
</enum>
</enumlist>
Now we will be able to insert as many levels as we want.
Kevin P. Fleming [Fri, 15 May 2009 13:13:47 +0000 (13:13 +0000)]
Add ability for modules to dynamically register logger levels
This patch adds the ability for modules to dynamically create logger levels for their own use; these are named levels just like the built-in levels, and can be directed to any destination that the logger can send any level to, by including their names in logger.conf.
Fix a race condition where a reinvite could trigger a 482 response.
The loop detection/spiral detection code in chan_sip used the owner
channel's state as a criterion for determining if the incoming INVITE
is a looped request. The problem with this is that the INVITE-handling
code happens in a different thread than the thread that marks the owner
channel as being up. As a result, if a reinvite were to come in very quickly,
say from another Asterisk on the same LAN, it was possible for the reinvite
to arrive before the owner channel had been set to the up state.
This patch corrects the problem by using the invitestate of the sip_pvt
instead, since that can be guaranteed to be set correctly by the time
the reinvite arrives. Since there is a switch statement further in the
INVITE-handling code, the AST_STATE_RINGING state also checks the invitestate
of the sip_pvt in case we should actually be treating the channel as if it were
up already.
Richard Mudgett [Thu, 14 May 2009 22:03:49 +0000 (22:03 +0000)]
Add outgoing_colp misdn.conf port parameter.
Select what to do with outgoing COLP information on this port.
0 - Send out COLP information unaltered. (default)
1 - Force COLP to restricted on all outgoing COLP information.
2 - Do not send COLP information.
outgoing_colp=0
Also fixed sending the EctInform message so it always has the
required redirectionNumber parameter when the status is active.
Tilghman Lesher [Thu, 14 May 2009 16:22:14 +0000 (16:22 +0000)]
If the timing ended on a zero, then we would loop forever.
(closes issue #14983)
Reported by: teox
Patches:
20090513__issue14983.diff.txt uploaded by tilghman (license 14)
Tested by: teox
Remove an extraneous unlocking operation from ast_channel_free.
In the case that we could not remove the desired channel from the
list of channels, there was an extra call to unlock the channel list.
Since we unlock the list later on in the function anyway, this results
in the list being unlocked twice yet only being locked once.
(closes issue #15098)
Reported by: tim_ringenbach
Patches:
remove_extra_unlock.diff uploaded by tim (license 540)
........
Do not lock the 'sessions' container, lock the allocated 'session'.
There was a typo in the structure being locked, and we were locking the
'sessions' container instead of the 'session' structure thar we are modifying.
Reported by seanbright on #asterisk-dev, thanks!
Fix logic for how to proceed with a single digit extension.
(closes issue #15091)
Reported by: andrew
Patches:
20090512__issue15091.diff.txt uploaded by tilghman (license 14)
Tested by: andrew
........
Tilghman Lesher [Wed, 13 May 2009 00:13:43 +0000 (00:13 +0000)]
Two fixes found while debugging with ast_backtrace():
1) If MALLOC_DEBUG is used when concurrently using ast_backtrace, the free()
used in that routine will trigger an error, because the memory was allocated
internally to libc, where we could not intercept that call to wrap it.
Therefore, it's not memory we knew about, and the free is reported as an
error.
2) Now that channels are objects, the old hack of initializing a channel
to all zeroes no longer works, since we may try to call something like
ast_channel_lock() within a function on that reference. In that case, it's
reported as an error, because the pointer isn't an object reference.
Fix a crash when logging out from the AMI and avoid astobj2 warning messages.
When the user logout the session was being destroyed twice and the file
descriptor was being closed twice. The sessions reference counter wasn't
used in a proper way.
The 'mansession' structure was being treated as an astobj2 and we were
calling ao2_lock/ao2_unlock causing astobj2 report a warning message and
not locking the structure.
Also we were using an ugly naming convention 'destroy_session',
'session_destroy', 'free_session', ... all this "duplicated" code was merged.
This change modifies app_queue to properly generate CDR records in failure
situations.
This involves setting a proper cdr disposition coresponding to the given
failure condition and ensuring the proper information is stored in the cdr
record.
Mark Michelson [Tue, 12 May 2009 20:28:13 +0000 (20:28 +0000)]
Update spiral support in trunk and 1.6.X to match what is in 1.4.
In 1.4, a SIP spiral is treated the same way as a call forward. This
works much better than what is currently in trunk and 1.6.X. The code
in trunk and 1.6.X did not create a new call to the recipient of the spiral,
instead trying to continue the same call. In addition to just being plain
wrong, this also had the side effect of only being able to spiral calls
to other SIP channels.
With this in place, as long as call forwards are honored, SIP spirals
will work properly. This means that it will work for outbound calls
made by the Queue, Dial, and Page applications. For originated calls and
spool calls, however, the spiral will not work properly until a generic
call forward mechanism is introduced into Asterisk.
Set the invitestate to INV_CANCELLED only if we are actually sending a SIP CANCEL.
The problem was that the hangup code was setting the invitestate too early. The result of
this was that we would always send a CANCEL request, even if it was not an appropriate
time to do so (e.g. we have not yet received a provisional response for our INVITE).
Note that this same fix had been applied to trunk and the 1.6.X branches starting with
revision 155467. This is why you will see this revision being blocked from those places.
Move 300 bytes around on the stack, to make more room for an extension buffer.
This allows more concurrent extensions to be copied for a single voicemail,
without creating a possibility of upsetting existing users, where a dialplan
could run out of stack space where it had run fine before. Alternatively,
we could have allocated off the heap, but that is a larger change and would
have increased the chance for instability introduced by this change.
This is really solved starting in 1.6.0.11, as the use of an ast_str buffer
allows an unlimited number of extensions (up to available memory). We
additionally create a new warning message when the buffer length is exceeded,
permitting administrators to see an issue after the fact, whereas previously
the list was silently truncated.
(closes issue #14739)
Reported by: p_lindheimer
Patches:
20090417__bug14739.diff.txt uploaded by tilghman (license 14)
Tested by: p_lindheimer
........
Russell Bryant [Mon, 11 May 2009 22:04:40 +0000 (22:04 +0000)]
Fix some timer state corruption.
In res_timer_timerfd, handle the case that set_rate gets called while a timer
is still in continuous mode. In this case, we want to remember the configured
rate, but not actually set it until continuous mode has been disabled.
Thanks to dvossel for finding and helping to debug the problem.
Sent wrong message to clear a call we started if the other end has not responed yet.
In the state MISDN_CALLING (i.e. SETUP was sent but no answer has arrived yet),
it is not allowed to clear the call with RELEASE_COMPLETE. It must be
cleared with DISCONNECT. A RELEASE_COMPLETE is only allowed as an answer
to a SETUP. (See Q.931 ch. 5.3.2, 5.3.2.a, 5.3.2.b)
Patches:
chan-misdn-ccstate7.patch uploaded by customer.
David Vossel [Fri, 8 May 2009 20:32:51 +0000 (20:32 +0000)]
TCP not matching valid peer.
find_peer() does not find a valid peer when using pvt->recv as the sockaddr_in argument. Because of the way TCP works, the port number in pvt->recv is not what we're looking for at all. There is currently only one place that find_peer searches for a peer using the sockaddr_in argument. If the peer is not found after using pvt->recv (works for UDP since the port number will be correct), a temp sockaddr_in struct is made using the Contact header in the sip_request. This has the correct port number in it.
Make absolute paths for logger channels work properly
(Note: This is not a new feature, it was previously undocumented and broken.)
The Asterisk logger has a feature to support absolute pathnames for logger channels, but the code implementing the feature was broken. This has been fixed, and the absolute path feature is now documented in the sample logger.conf.
........
Fix Background within a Macro for FreePBX.
If the single digit DTMF is an extension in the specified context, then
go there and signal no DTMF. Otherwise, we should exit with that DTMF.
If we're in Macro, we'll exit and seek that DTMF as the beginning of an
extension in the Macro's calling context. If we're not in Macro, then
we'll simply seek that extension in the calling context. Previously,
someone complained about the behavior as it related to the interior of a
Gosub routine, and the fix (#14011) inadvertently broke FreePBX
(#14940). This change should fix both of these situations, but with the
possible incompatibility that if a single digit extension does not exist
(but a longer extension COULD have matched), it would have previously
gone immediately to the "i" extension, but will now need to wait for a
timeout.
(closes issue #14940)
Reported by: p_lindheimer
Patches:
20090420__bug14940.diff.txt uploaded by tilghman (license 14)
Tested by: p_lindheimer
........
Tilghman Lesher [Thu, 7 May 2009 17:51:13 +0000 (17:51 +0000)]
Second result should not contain data from the first result.
(closes issue #15039)
Reported by: jims
Patches:
20090506__issue15039.diff.txt uploaded by tilghman (license 14)
Tested by: jims
Tilghman Lesher [Thu, 7 May 2009 17:13:36 +0000 (17:13 +0000)]
Send DTMF frame before playing back audio.
(closes issue #14858)
Reported by: barryf
Patches:
20090507__bug14858.diff.txt uploaded by tilghman (license 14)
Eliminate repetition of fullcontact during reconstruction.
If the fullcontact field appears in both the sippeers and the
sipregs table, then during reconstruction of the field, it will
otherwise be doubled.
(closes issue #14754)
Reported by: Alexei Gradinari
Patches:
20090506__bug14754.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen
........
Make ParkedCall application stop execution of the dialplan after hang up
Just changed park_exec to always return non-zero. I really wasn't entirely sure
at first if this was a bug. Decided it was since it would be surprising when
not using ParkedCall in the dialplan to hang up and have dialplan execution
continue.
Joshua Colp [Wed, 6 May 2009 17:38:51 +0000 (17:38 +0000)]
Fix a bug where a timer would be created but not acknowledged.
This scenario crept up if chan_iax2 was loaded with no configuration file present.
It would create a timer and tell it to go at an interval but the thread that normally
acknowledges it would not be created because no configuration file was present. The timer
will now be closed if no configuration file is present.
Tilghman Lesher [Wed, 6 May 2009 16:28:02 +0000 (16:28 +0000)]
Add numbers in Urdu, the national language of Pakistan
(closes issue #15034)
Reported by: nasirq
Patches:
ast_say_number_full_ur-patch.c uploaded by nasirq (license 772)
urdu.ods uploaded by nasirq (license 772)
Fix an incorrect assumption that certain values on the channel will always exist when they may not.
The CDR code involved with bridges wrongly assumed that the currently executing application and data
values will always exist. It is possible for this to be false when call forwarding is involved.
Revert CPC patch for now, until I decide whether or not it all should be merged into libss7/1.0 (It's still in the bug13495 branch and in libss7/trunk)
Joshua Colp [Tue, 5 May 2009 14:22:47 +0000 (14:22 +0000)]
Fix a bug with setting t38pt_udptl at the user or peer level.
If an incoming call authenticated as a user or peer and t38pt_udptl was
not set to yes in general then no UDPTL session would be present and any
T38 related things would fail. This commit changes it so that if after
authenticating T38 is enabled but no UDPTL session is present one will be
created.
Correct some flaws in the memory accounting code for stringfields and ao2 objects
Under some conditions, the memory allocation for stringfields and ao2 objects would not have supplied valid file/function names for MALLOC_DEBUG tracking, so this commit corrects that.
projects / thirdparty / asterisk.git / log
