Currently, everytime an information needs to be fetched from the PPTT,
the table is mapped via acpi_get_table() and unmapped after the use via
acpi_put_table() which is fine. However we do this at runtime especially
when the CPU is hotplugged out and plugged in back since we re-populate
the cache topology and other information.
However, with the support to fetch LLC information from the PPTT in the
cpuhotplug path which is executed in the atomic context, it is preferred
to avoid mapping and unmapping of the PPTT for every single use as the
acpi_get_table() might sleep waiting for a mutex.
In order to avoid the same, the table is needs to just mapped once on
the boot CPU and is never unmapped allowing it to be used at runtime
with out the hassle of mapping and unmapping the table.
Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
--
Hi Rafael,
Sorry to bother you again on this PPTT changes. Guenter reported an issue
with lockdep enabled in -next that include my cacheinfo/arch_topology changes
to utilise LLC from PPTT in the CPU hotplug path.
Please ack the change once you are happy so that I can get it merged with
other fixes via Greg's tree.
The newest Gen3 SoCs and Gen4 SoCs do not need manual tap correction
with HS400 anymore. So, instead of checking the SDHI version, add a
quirk flag and set manual tap correction only for affected SoCs.
If the channel has no descriptor and the interrupt is raised then the
kernel will OOPS. Check the result of vchan_next_desc() in the handler
axi_chan_block_xfer_complete() to avoid the error happening.
During debugging we have seen an issue where axi_chan_dump_lli()
is passed a NULL LLI pointer which ends up causing an OOPS due
to trying to get fields from it. Simply print NULL LLI and exit
to avoid this.
There is no point in doing several preparatory steps in
of_overlay_fdt_apply(), only to see of_overlay_apply() return early
because of a corrupt device tree.
Move the check for a corrupt device tree from of_overlay_apply() to
of_overlay_fdt_apply(), to check for this as early as possible.
QEMU has a -no-reboot option, which halts instead of reboots when the
guest asks to reboot. This is invaluable when used with
CONFIG_PANIC_TIMEOUT=-1 (and panic_on_warn), because it allows panics
and warnings to be caught immediately in CI. Implement this in UML too,
by way of a basic setup param.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
In some cases we may get a platform device that has ACPI companion
which is different to the pin control described in the ACPI tables.
This is primarily happens when device is instantiated by board file.
In order to allow this device being enumerated, refactor
intel_pinctrl_get_soc_data() to check the matching data instead of
ACPI companion.
Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 1599069a62c6 ("phy: core: Warn when phy_power_on is called
before phy_init"), the following warning has been reported:
phy_power_on was called before phy_init
To address this, we need to remove phy_power_on from exynos_ufs_phy_init()
and move it after phy_init. phy_power_off and phy_exit are also necessary
in exynos_ufs_remove().
Link: https://lore.kernel.org/r/20220706020255.151177-4-chanho61.park@samsung.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to prepare the driver code for device reset event
notification, change the event handler function flow to call
device reset from one code block.
In addition, the commit fixes an issue that reset was performed
w/o checking the 'hard_reset_on_fw_event' state and w/o setting
the HL_DRV_RESET_DELAY flag.
Arrays of struct attribute are expected to be NULL terminated.
This is required by API methods such as device_add_groups.
This fixes a crash when loading the driver for Goya device.
When the following configs are enabled:
* CORESIGHT
* CORESIGHT_SOURCE_ETM4X
* UBSAN
* UBSAN_TRAP
Clang fails assemble the kernel with the error:
<instantiation>:1:7: error: expected constant expression in '.inst' directive
.inst (0xd5200000|((((2) << 19) | ((1) << 16) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 7) & 0x7)) << 12) | ((((((((((0x160 + (i * 4))))) >> 2))) & 0xf)) << 8) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 4) & 0x7)) << 5)))|(.L__reg_num_x8))
^
drivers/hwtracing/coresight/coresight-etm4x-core.c:702:4: note: while in
macro instantiation
etm4x_relaxed_read32(csa, TRCCNTVRn(i));
^
drivers/hwtracing/coresight/coresight-etm4x.h:403:4: note: expanded from
macro 'etm4x_relaxed_read32'
read_etm4x_sysreg_offset((offset), false)))
^
drivers/hwtracing/coresight/coresight-etm4x.h:383:12: note: expanded
from macro 'read_etm4x_sysreg_offset'
__val = read_etm4x_sysreg_const_offset((offset)); \
^
drivers/hwtracing/coresight/coresight-etm4x.h:149:2: note: expanded from
macro 'read_etm4x_sysreg_const_offset'
READ_ETM4x_REG(ETM4x_OFFSET_TO_REG(offset))
^
drivers/hwtracing/coresight/coresight-etm4x.h:144:2: note: expanded from
macro 'READ_ETM4x_REG'
read_sysreg_s(ETM4x_REG_NUM_TO_SYSREG((reg)))
^
arch/arm64/include/asm/sysreg.h:1108:15: note: expanded from macro
'read_sysreg_s'
asm volatile(__mrs_s("%0", r) : "=r" (__val)); \
^
arch/arm64/include/asm/sysreg.h:1074:2: note: expanded from macro '__mrs_s'
" mrs_s " v ", " __stringify(r) "\n" \
^
Consider the definitions of TRCSSCSRn and TRCCNTVRn:
drivers/hwtracing/coresight/coresight-etm4x.h:56
#define TRCCNTVRn(n) (0x160 + (n * 4))
drivers/hwtracing/coresight/coresight-etm4x.h:81
#define TRCSSCSRn(n) (0x2A0 + (n * 4))
Where the macro parameter is expanded to i; a loop induction variable
from etm4_disable_hw.
When any compiler can determine that loops may be unrolled, then the
__builtin_constant_p check in read_etm4x_sysreg_offset() defined in
drivers/hwtracing/coresight/coresight-etm4x.h may evaluate to true. This
can lead to the expression `(0x160 + (i * 4))` being passed to
read_etm4x_sysreg_const_offset. Via the trace above, this is passed
through READ_ETM4x_REG, read_sysreg_s, and finally to __mrs_s where it
is string-ified and used directly in inline asm.
Regardless of which compiler or compiler options determine whether a
loop can or can't be unrolled, which determines whether
__builtin_constant_p evaluates to true when passed an expression using a
loop induction variable, it is NEVER safe to allow the preprocessor to
construct inline asm like:
asm volatile (".inst (0x160 + (i * 4))" : "=r"(__val));
^ expected constant expression
Instead of read_etm4x_sysreg_offset() using __builtin_constant_p(), use
__is_constexpr from include/linux/const.h instead to ensure only
expressions that are valid integer constant expressions get passed
through to read_sysreg_s().
This is not a bug in clang; it's a potentially unsafe use of the macro
arguments in read_etm4x_sysreg_offset dependent on __builtin_constant_p.
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to
issue the CMF WQE in lpfc_issue_cmf_sync_wqe.
If ret_val is non-zero, then free the iocbq request structure.
Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Malformed user input to debugfs results in buffer overflow crashes. Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After merging lucid and trion pll functions in commit 0b01489475c6
("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.
Always use crypto_has_comp() so that crypto can lookup module, call
usermodhelper to load the modules, wait for usermodhelper to finish and so
on. Otherwise crypto will do all of these steps under CPU hot-plug lock
and this looks like too much stuff to handle under the CPU hot-plug lock.
Besides this can end up in a deadlock when usermodhelper triggers a code
path that attempts to lock the CPU hot-plug lock, that zram already holds.
An example of such deadlock:
- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto
and waits for modprobe to finish
- path B. async work kthread that brings in scsi device. It wants to
register CPUHP states at some point, and it needs the CPU hot-plug
lock for that, which is owned by zram.
The uacce driver must deal with a possible removal of the parent device
or parent driver module rmmod at any time.
Although uacce_remove(), called on device removal and on driver unbind,
prevents future use of the uacce fops by removing the cdev, fops that
were called before that point may still be running.
Serialize uacce_fops_open() and uacce_remove() with uacce->mutex.
Serialize other fops against uacce_remove() with q->mutex.
Since we need to protect uacce_fops_poll() which gets called on the fast
path, replace uacce->queues_lock with q->mutex to improve scalability.
The other fops are only used during setup.
uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes
whether uacce_remove() has disabled all queues. If that is the case,
don't go any further since the parent device is being removed and
uacce->ops should not be called anymore.
When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
cleared, whatever the vbus valid signal state is. The pull-up should not
be set when vbus isn't present (this is determined by the drd controller).
This patch ensures that B-Session (so Peripheral role + vbus valid signal)
is valid before clearing the DCTL_SFTDISCON bit when role switch is used.
Keep original behavior when usb-role-switch isn't used.
If qla4xxx doesn't remove the connection before the session, the iSCSI
class tries to remove the connection for it. We were doing a
iscsi_put_conn() in the iter function which is not needed and will result
in a use after free because iscsi_remove_conn() will free the connection.
Link: https://lore.kernel.org/r/20220616222738.5722-2-michael.christie@oracle.com Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In usbhs_rza1_hardware_init(), of_find_node_by_name() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are some drivers that can use the Type C mux API, but don't have
to. Introduce CONFIG guards for the mux functions so that drivers can
include the header file and not run into compilation errors on systems
which don't have CONFIG_TYPEC enabled. When CONFIG_TYPEC is not enabled,
the Type C mux functions will be stub versions of the original calls.
Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20220615172129.1314056-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.
Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().
Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With the addition of clock-output-names, we can now unify the internal
clock naming for omap4 and 5 to follow the other TI SoCs.
We are still using legacy clkctrl names for omap4 and 5 based on the clock
manager name which is wrong. Instead, we want to use the clkctrl clock
based naming.
We must now also drop the legacy TI_CLK_CLKCTRL_COMPAT quirk for the
clkctrl clock.
This change will allow further devicetree warning cleanup as already
done for am3/4 and dra7.
Cc: linux-clk@vger.kernel.org Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220615064306.22254-1-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix -Woverflow warnings for drm/meson driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.
drivers/gpu/drm/meson/meson_viu.c: In function ‘meson_viu_init’:
drivers/gpu/drm/meson/meson_registers.h:1826:48: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
#define VIU_OSD_BLEND_REORDER(dest, src) ((src) << (dest * 4))
^
drivers/gpu/drm/meson/meson_viu.c:472:18: note: in expansion of macro ‘VIU_OSD_BLEND_REORDER’
writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
^~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix -Woverflow warnings for tegra irqchip driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.
drivers/irqchip/irq-tegra.c: In function ‘tegra_ictlr_suspend’:
drivers/irqchip/irq-tegra.c:151:18: warning: large integer implicitly truncated to unsigned type [-Woverflow]
writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
^
Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Slot capabilities are currently not reported because emulated bridge does
not report the PCI_EXP_FLAGS_SLOT flag.
Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers
are supported.
Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read
function to static buffer as it is only statically filled the
PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this
register.
Set Presence State Bit to 1 since there is no support for unplugging the
card and there is currently no platform able to detect presence of a card -
in such a case the bit needs to be set to 1.
Finally correctly set Physical Slot Number to 1 since there is only one
port and zero value is reserved for ports within the same silicon as Root
Port which is not our case for Aardvark HW.
Likewise to the uvcvideo hostside driver, this patch is changing the
usb_request message of an non zero completion handler call from dev_info
to dev_warn.
The current limitation of possible number of requests being handled is
dependent on the gadget speed. It makes more sense to depend on the
typical frame size when calculating the number of requests. This patch
is changing this and is using the previous limits as boundaries for
reasonable minimum and maximum number of requests.
For a 1080p jpeg encoded video stream with a maximum imagesize of
e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting
number of requests is calculated to 49.
The Broadcom BCM5750x NICs may be multi-function devices. They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
The trackpad of the given device sends continuous report of pointers
status as per wxn8 spec. However, the spec did not clarify when the
fingers are lifted so fast that between the interval of two report
frames fingers on pad reduced from >=2 to 0. The second last report
contains >=2 fingers with tip state 1 and the last report contains only
1 finger with tip state 0. Although this can happen unfrequently, a
quick fix will be improve the consistency to 100%. A quick fix is to
disable MT_QUIRK_ALWAYS_VALID and enable MT_QUIRK_NOT_SEEN_MEANS_UP.
Test for hid-tools is added in [1]
In addition to this, I2C device 04CA:00B1 may also need similar class
but with MT_QUIRK_FORCE_MULTI_INPUT disabled (but it does not harm to
enable it on non-multi-input device either). The respective owner has
been notified and a patch may coming soon after test.
In case of uni-directional time sync, TMU handshake is
initiated by upstream router. In case of bi-directional
time sync, TMU handshake is initiated by downstream router.
In order to handle correctly the case of uni-directional mode,
we avoid changing the upstream router's rate to off,
because it might have another downstream router plugged that is set to
uni-directional mode (and we don't want to change its mode).
Instead, we always change downstream router's rate.
Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
traps: Missing ENDBR: andw_ax_dx+0x0/0x10 [kvm]
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/traps.c:253!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<TASK>
asm_exc_control_protection+0x2b/0x30
RIP: 0010:andw_ax_dx+0x0/0x10 [kvm]
Code: c3 cc cc cc cc 0f 1f 44 00 00 66 0f 1f 00 48 19 d0 c3 cc cc cc
cc 0f 1f 40 00 f3 0f 1e fa 20 d0 c3 cc cc cc cc 0f 1f 44 00 00
<66> 0f 1f 00 66 21 d0 c3 cc cc cc cc 0f 1f 40 00 66 0f 1f 00 21
d0
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().
It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.
There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.
It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit 2122a833316f ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the
bo_list_mutex inside the function amdgpu_cs_vm_handling and again on
amdgpu_cs_parser_fini. This problem results in the following
use-after-free problem:
Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling
function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle
the unlock.
Fixes: 90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2") Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the packet overhead is subtracted using unsigned arithmetic.
With a short sync pulse, this could underflow and wrap around to near
the maximal u16 value. Fix this by using signed subtraction. The call to
max() will correctly handle any negative numbers that are produced.
Apply the same fix to the other timings, even though those subtractions
are less likely to underflow.
Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The drm_of_lvds_get_data_mapping() returns either negative value on
error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also
catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure
every time 'data-mapping' DT property is specified.
Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
A list of devices to be reset is already created in
amdgpu_device_gpu_recover function. Creating another list with the
same nodes is incorrect and not supported in list_head. Instead, pass
the device list as part of reset context.
The kernel only manages the ccs state with lmem-only objects, however
the kernel should still take care not to leak the CCS state from the
previous user.
Fixes: 48760ffe923a ("drm/i915/gt: Clear compress metadata for Flat-ccs objects") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220727164346.282407-1-matthew.auld@intel.com
(cherry picked from commit 353819d85f87be46aeb9c1dd929d445a006fc6ec) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In this function, there are two refcount leak bugs:
(1) when breaking out of for_each_endpoint_of_node(), we need call
the of_node_put() for the 'ep';
(2) we should call of_node_put() for the reference returned by
of_graph_get_remote_port() when it is not used anymore.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Liang He <windhl@126.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220726010722.1319416-1-windhl@126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When DCSS + MIPI_DSI is used, and the last bridge in the chain supports
HPD, we can see a "Hot plug detection already enabled" warning stack
trace dump that's thrown when DCSS is initialized.
The problem appeared when HPD was enabled by default in the
bridge_connector initialization, which made the
drm_bridge_connector_enable_hpd() call, in DCSS init path, redundant.
So, let's remove that call.
We should warn user-space that it is doing something wrong when trying
to activate sessions with identical parameters but WARN_ON_ONCE macro
can not be used here as it serves a different purpose.
So it would be good to replace it with netdev_warn_once() message.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.
This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.
This leads to the following:
CC arch/powerpc/kernel/prom_init.o
In file included from ./include/linux/nodemask.h:97,
from ./include/linux/mmzone.h:17,
from ./include/linux/gfp.h:7,
from ./include/linux/xarray.h:15,
from ./include/linux/radix-tree.h:21,
from ./include/linux/idr.h:15,
from ./include/linux/kernfs.h:12,
from ./include/linux/sysfs.h:16,
from ./include/linux/kobject.h:20,
from ./include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
./include/linux/random.h: In function 'add_latent_entropy':
./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
make: *** [Makefile:1855: arch/powerpc] Error 2
Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.
The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()
This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.
"
However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.
So this call should now be called from intel_eth_pci_remove().
When adding the D1 TCON bindings, I missed the conditional blocks that
restrict the binding for TCON LCD vs TCON TV hardware. Add the D1 TCON
variants to the appropriate blocks for DE2 TCON LCDs and TCON TVs.
Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220812073702.57618-1-samuel@sholland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do test on a virtio scsi device (/dev/sda) and the default mq
scheduler is 'none'. We found a IO hung as following:
blk_finish_plug
blk_mq_plug_issue_direct
scsi_mq_get_budget
//get budget_token fail and sdev->restarts=1
scsi_end_request
scsi_run_queue_async
//sdev->restart=0 and run queue
blk_mq_request_bypass_insert
//add request to hctx->dispatch list
//continue to dispath plug list
blk_mq_dispatch_plug_list
blk_mq_try_issue_list_directly
//success issue all requests from plug list
After .get_budget fail, scsi_mq_get_budget will increase 'restarts'.
Normally, it will run hw queue when io complete and set 'restarts'
as 0. But if we run queue before adding request to the dispatch list
and blk_mq_dispatch_plug_list also success issue all requests, then
on one will run queue, and the request will be stall in the dispatch
list and cannot complete forever.
It is wrong to use last request of plug list to decide if run queue is
needed since all the remained requests in plug list may be from other
hctxs. To fix the bug, pass run_queue as true always to
blk_mq_request_bypass_insert().
Fix-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Fixes: dc5fc361d891 ("block: attempt direct issue of plug list") Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device bindings shouldn't put any constraints on the regulator-name
property specified in the generic bindings. This allows using arbitrary
and descriptive names for the regulators.
Suggested-by: Mark Brown <broonie@kernel.org> Fixes: 7ae9e3a6bf3f ("dt-bindings: regulator: add pca9450 regulator yaml") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20220802064335.8481-1-frieder@fris.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 7b4537199a4a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.
This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.
Fix this by ignoring cases where requested promiscuous mode exists.
Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VF was not able to send tagged traffic when it didn't
have any VLAN interfaces and VLAN anti-spoofing was enabled.
Fix this by allowing VFs with no VLAN filters to send tagged
traffic. After VF adds a VLAN interface it will be able to
send tagged traffic matching VLAN filters only.
Testing hints:
1. Spawn VF
2. Send tagged packet from a VF
3. The packet should be sent out and not dropped
4. Add a VLAN interface on VF
5. Send tagged packet on that VLAN interface
6. Packet should be sent out and not dropped
7. Send tagged packet with id different than VLAN interface
8. Packet should be dropped
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
call trace in ice_reset_vf that VF's VSI is null.
Remove WARN_ON() from check if VSI is null in ice_reset_vf.
Add "VF is already removed\n" in dev_dbg().
This WARN_ON() is unnecessary and causes call trace, despite that
call trace, driver still works. There is no need for this warn
because this piece of code is responsible for disabling VF's Tx/Rx
queues when VF is disabled, but when VF is already removed there
is no need to do reset or disable queues.
Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit b03d519d3460 ("ice: store VF pointer instead of VF ID")
WARN_ON checks were added to validate the vsi->vf pointer and
catch programming errors. However, one check to vsi->vf was missed.
This caused a call trace when resetting VFs.
Fix ice_vsi_rebuild by encompassing VF pointer in WARN_ON check.
Fixes: b03d519d3460 ("ice: store VF pointer instead of VF ID") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.
The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.
Fixes: fd3645413197 ("net: dsa: change scope of STP state setter") Reported-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If construction of the array of policies fails when recording
non-first policy we need to unwind.
netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.
Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This register, used as part of stats->tx_dropped in
ocelot_get_stats64(), has a wrong address. At the address currently
given, there is actually the c_tx_green_prio_6 counter.
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: a6cec0bcd342 ("net: rtnetlink: add bulk delete support flag") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue happens on specific paths in the function. After both the
object `rt` and `neigh` are grabbed successfully, when `lifetime` is
nonzero but the metric needs change, the function just deletes the
route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh`
again if above conditions hold. The function simply overwrite `neigh`
if succeeds or returns if fails, without decreasing the reference
count of previous `neigh`. This may result in memory leaks.
Fix it by decrementing the reference count of `neigh` in place.
Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.
Reorder the operations, clear PTP configuration after unregistering the
netdevice.
Fixes: 8748642751ede ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using native endian-ness for device supplied fields is wrong
on BE platforms. Sparse warns about this.
Fixes: 91f41f01d219 ("drivers/net/virtio_net: Added RSS hash report.") Cc: "Andrew Melnychenko" <andrew@daynix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.
1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:
if (!qdev || mhi_res->transaction_status)
return;
Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------
2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():
Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.
Fixes: a2e2cc0dbb11 ("net: qrtr: Start MHI channels during init") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The issue happens on some error handling paths. When the function
fails to grab the object `xprt`, it simply returns 0, forgetting to
decrease the reference count of another object `xps`, which is
increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount
leaks. Also, the function forgets to check whether `xps` is valid
before using it, which may result in NULL-dereferencing issues.
Fix it by adding proper error handling code when either `xprt` or
`xps` is NULL.
Fixes: 5b7eb78486cd ("SUNRPC: take a xprt offline using sysfs") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the end of a message, the HW gets a reset in meson_spicc_unprepare_transfer(),
this resets the SPICC_CONREG register and notably the value set by the
Common Clock Framework.
This is problematic because:
- the register value CCF can be different from the corresponding CCF cached rate
- CCF is allowed to change the clock rate whenever the HW state
This introduces:
- local pow2 clock ops checking the HW state before allowing a clock operation
- separation of legacy pow2 clock patch and new enhanced clock path
- SPICC_CONREG datarate value is now value kepts across messages
It has been checked that:
- SPICC_CONREG datarate value is kept across messages
- CCF is only allowed to change the SPICC_CONREG datarate value when busy
- SPICC_CONREG datarate value is correct for each transfer
This didn't appear before commit 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
because we recalculated and wrote the rate for each xfer.
Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support") Reported-by: Da Xue <da@libre.computer> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220811134445.678446-1-narmstrong@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.
The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.
So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important.
Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220815065550.1303620-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
