commit 9734fd7a2777 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM
conditionals") did not quite work properly in the 5.15.y branch where it was
applied to fix a build error when CONFIG_PM was set as it left the following
build errors still present:
A recent patch caused an unused-function warning in builds with
CONFIG_PM disabled, after the function became marked 'static':
drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function]
91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
| ^~~~~~~~~~~~~~~~~~~
This could be solved by adding another #ifdef, but as there is
a trend towards removing CONFIG_PM checks in favor of helper
macros, do the same conversion here and use pm_ptr() to get
either a function pointer or NULL but avoid the warning.
As the hidden functions reference some other symbols, make
sure those are visible at compile time, at the minimal cost of
a few extra bytes for 'struct usb_device'.
Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
Fix the crash by assigning the job pointer to NULL before signaling the
fence. This ensures that the job pointer is cleared before any new job
starts execution, preventing the race condition and the NULL pointer
dereference crash.
Cc: stable@vger.kernel.org Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Tested-by: Phil Elwell <phil@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
This patch addresses a null-ptr-deref in qt2_process_read_urb() due to
an incorrect bounds check in the following:
if (newport > serial->num_ports) {
dev_err(&port->dev,
"%s - port change to invalid port: %i\n",
__func__, newport);
break;
}
The condition doesn't account for the valid range of the serial->port
buffer, which is from 0 to serial->num_ports - 1. When newport is equal
to serial->num_ports, the assignment of "port" in the
following code is out-of-bounds and NULL:
serial_priv->current_port = newport;
port = serial->port[serial_priv->current_port];
The fix checks if newport is greater than or equal to serial->num_ports
indicating it is out-of-bounds.
Reported-by: syzbot <syzbot+506479ebf12fe435d01a@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=506479ebf12fe435d01a Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: <stable@vger.kernel.org> # 3.5 Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate index before access iwl_rate_mcs to keep rate->index
inside the valid boundaries. Use MCS_0_INDEX if index is less
than MCS_0_INDEX and MCS_9_INDEX if index is greater then
MCS_9_INDEX.
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage 6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
count and offset are passed from user space and not checked, only
offset is capped to 40 bits, which can be used to read/write out of
bounds of the device.
Fixes: 6e3f26456009 (“vfio/platform: read and write support for the device fd”) Cc: stable@vger.kernel.org Reported-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Tested-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the fpsp040 code when copyin or copyout fails call
force_sigsegv(SIGSEGV) instead of do_exit(SIGSEGV).
This solves a couple of problems. Because do_exit embeds the ptrace
stop PTRACE_EVENT_EXIT a complete stack frame needs to be present for
that to work correctly. There is always the information needed for a
ptrace stop where get_signal is called. So exiting with a signal
solves the ptrace issue.
Further exiting with a signal ensures that all of the threads in a
process are killed not just the thread that malfunctioned. Which
avoids confusing userspace.
To make force_sigsegv(SIGSEGV) work in fpsp040_die modify the code to
save all of the registers and jump to ret_from_exception (which
ultimately calls get_signal) after fpsp040_die returns.
v2: Updated the branches to use gas's pseudo ops that automatically
calculate the best branch instruction to use for the purpose.
We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted. We are about to call
syscall_trace(), which might stop for tracer. If that happens, we'd better
have task_pt_regs() returning correct result...
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haowei Yan <g1042620637@gmail.com> found that ets_class_from_arg() can
index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc") Reported-by: Haowei Yan <g1042620637@gmail.com> Suggested-by: Haowei Yan <g1042620637@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250111145740.74755-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use
buffer heads or iomap_folio_state structs, and we cannot mix the two.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When switching to selects for MFD_WM8994 a dependency should have also
been added for I2C, as the dependency on MFD_WM8994 will not be
considered by the select.
Fixes: fd55c6065bec ("ASoC: samsung: Add missing selects for MFD_WM8994") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501082020.2bpGGVTW-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250108134828.246570-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI
pin instead of a normal GPIO. Since the power key is connected to the PMIC,
and people expect to wake up a suspended system via this key, the NMI IRQ
controller must stay alive when the system goes into suspend.
Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to
sleep, so that the power key can wake up those systems.
The ISCSI_UEVENT_GET_HOST_STATS request is already handled in
iscsi_get_host_stats(). This fix ensures that redundant responses are
skipped in iscsi_if_rx().
- On success: send reply and stats from iscsi_get_host_stats()
within if_recv_msg().
- On error: fall through.
Signed-off-by: Xiang Zhang <hawkxiang.cpp@gmail.com> Link: https://lore.kernel.org/r/20250107022432.65390-1-hawkxiang.cpp@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:
kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
of function '__secure_computing' [-Wimplicit-function-declaration]
52 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.
The ASoC driver should not be used without the MFD component. This was
causing randconfig issues with regmap IRQ which is selected by the MFD
part of the wm8994 driver.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501061337.R0DlBUoD-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250106154639.3999553-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add()
concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked,
which triggers a data-race around sk->sk_forward_alloc:
tcp_v6_rcv
tcp_v6_do_rcv
skb_clone_and_charge_r
sk_rmem_schedule
__sk_mem_schedule
sk_forward_alloc_add()
skb_set_owner_r
sk_mem_charge
sk_forward_alloc_add()
__kfree_skb
skb_release_all
skb_release_head_state
sock_rfree
sk_mem_uncharge
sk_forward_alloc_add()
sk_mem_reclaim
// set local var reclaimable
__sk_mem_reclaim
sk_forward_alloc_add()
The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when
sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock().
Fix the same issue in dccp_v6_do_rcv().
Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alva Lan <alvalan9@foxmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().
Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling") Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Fri, 17 Jan 2025 11:05:51 +0000 (12:05 +0100)]
x86/xen: fix SLS mitigation in xen_hypercall_iret()
The backport of upstream patch a2796dff62d6 ("x86/xen: don't do PV iret
hypercall through hypercall page") missed to adapt the SLS mitigation
config check from CONFIG_MITIGATION_SLS to CONFIG_SLS.
Recent reports have shown how we sometimes call vsock_*_has_data()
when a vsock socket has been de-assigned from a transport (see attached
links), but we shouldn't.
Previous commits should have solved the real problems, but we may have
more in the future, so to avoid null-ptr-deref, we can return 0
(no space, no data available) but with a warning.
This way the code should continue to run in a nearly consistent state
and have a warning that allows us to debug future problems.
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/ Link: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/ Link: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/ Co-developed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Co-developed-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Wongi Lee <qwerty@theori.io> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[SG: fixed conflict since this tree is missing vsock_connectible_has_data()
added by commit 0798e78b102b ("af_vsock: rest of SEQPACKET support")] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference.
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by: Hyunwoo Kim <v4bel@theori.io> Reported-by: Wongi Lee <qwerty@theori.io> Closes: https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/ Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[SG: fixed context conflict since this tree is missing commit 71dc9ec9ac7d
("virtio/vsock: replace virtio_vsock_pkt with sk_buff")] Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
nfsd_file_put() in one thread can race with another thread doing
garbage collection (running nfsd_file_gc() -> list_lru_walk() ->
nfsd_file_lru_cb()):
* In nfsd_file_put(), nf->nf_ref is 1, so it tries to do nfsd_file_lru_add().
* nfsd_file_lru_add() returns true (with NFSD_FILE_REFERENCED bit set)
* garbage collector kicks in, nfsd_file_lru_cb() clears REFERENCED bit and
returns LRU_ROTATE.
* garbage collector kicks in again, nfsd_file_lru_cb() now decrements nf->nf_ref
to 0, runs nfsd_file_unhash(), removes it from the LRU and adds to the dispose
list [list_lru_isolate_move(lru, &nf->nf_lru, head)]
* nfsd_file_put() detects NFSD_FILE_HASHED bit is cleared, so it tries to remove
the 'nf' from the LRU [if (!nfsd_file_lru_remove(nf))]. The 'nf' has been added
to the 'dispose' list by nfsd_file_lru_cb(), so nfsd_file_lru_remove(nf) simply
treats it as part of the LRU and removes it, which leads to its removal from
the 'dispose' list.
* At this moment, 'nf' is unhashed with its nf_ref being 0, and not on the LRU.
nfsd_file_put() continues its execution [if (refcount_dec_and_test(&nf->nf_ref))],
as nf->nf_ref is already 0, nf->nf_ref is set to REFCOUNT_SATURATED, and the 'nf'
gets no chance of being freed.
nfsd_file_put() can also race with nfsd_file_cond_queue():
* In nfsd_file_put(), nf->nf_ref is 1, so it tries to do nfsd_file_lru_add().
* nfsd_file_lru_add() sets REFERENCED bit and returns true.
* Some userland application runs 'exportfs -f' or something like that, which triggers
__nfsd_file_cache_purge() -> nfsd_file_cond_queue().
* In nfsd_file_cond_queue(), it runs [if (!nfsd_file_unhash(nf))], unhash is done
successfully.
* nfsd_file_cond_queue() runs [if (!nfsd_file_get(nf))], now nf->nf_ref goes to 2.
* nfsd_file_cond_queue() runs [if (nfsd_file_lru_remove(nf))], it succeeds.
* nfsd_file_cond_queue() runs [if (refcount_sub_and_test(decrement, &nf->nf_ref))]
(with "decrement" being 2), so the nf->nf_ref goes to 0, the 'nf' is added to the
dispose list [list_add(&nf->nf_lru, dispose)]
* nfsd_file_put() detects NFSD_FILE_HASHED bit is cleared, so it tries to remove
the 'nf' from the LRU [if (!nfsd_file_lru_remove(nf))], although the 'nf' is not
in the LRU, but it is linked in the 'dispose' list, nfsd_file_lru_remove() simply
treats it as part of the LRU and removes it. This leads to its removal from
the 'dispose' list!
* Now nf->ref is 0, unhashed. nfsd_file_put() continues its execution and set
nf->nf_ref to REFCOUNT_SATURATED.
As shown in the above analysis, using nf_lru for both the LRU list and dispose list
can cause the leaks. This patch adds a new list_head nf_gc in struct nfsd_file, and uses
it for the dispose list. This does not fix the nfsd_file leaking issue completely.
Signed-off-by: Youzhong Yang <youzhong@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: e332bc67cf5e ("ipv6: Don't call with rt6_uncached_list_flush_dev") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20240913083147.3095442-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
Note that the UAF is not easy to trigger as the free path is indirected
behind a couple RCU grace periods and a work item execution. I could only
trigger it with artifical msleep() injected in blkcg_unpin_online().
Fix it by reading the parent pointer before destroying the blkcg's blkg's.
If the caller of vmap() specifies VM_MAP_PUT_PAGES (currently only the
i915 driver), we will decrement nr_vmalloc_pages and MEMCG_VMALLOC in
vfree(). These counters are incremented by vmalloc() but not by vmap() so
this will cause an underflow. Check the VM_MAP_PUT_PAGES flag before
decrementing either counter.
Link: https://lkml.kernel.org/r/20241211202538.168311-1-willy@infradead.org Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Balbir Singh <balbirs@nvidia.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'data' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org Fixes: 4e130dc7b413 ("iio: adc: rockchip_saradc: Add support iio buffers") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-4-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bin Lan <lanbincn@qq.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently suspending while sensors are one will result in timestamping
continuing without gap at resume. It can work with monotonic clock but
not with other clocks. Fix that by resetting timestamping.
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a CPU attempts to enter low power mode, it disables the redistributor
and Group 1 interrupts and reinitializes the system registers upon wakeup.
If the transition into low power mode fails, then the CPU_PM framework
invokes the PM notifier callback with CPU_PM_ENTER_FAILED to allow the
drivers to undo the state changes.
The GIC V3 driver ignores CPU_PM_ENTER_FAILED, which leaves the GIC in
disabled state.
Handle CPU_PM_ENTER_FAILED in the same way as CPU_PM_EXIT to restore normal
operation.
[ tglx: Massage change log, add Fixes tag ]
Fixes: 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier") Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241220093907.2747601-1-quic_ylal@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bruno VERNAY <bruno.vernay@se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups.
Link: https://lkml.kernel.org/r/20250110102821.2a37581b@fangorn Fixes: 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") Signed-off-by: Rik van Riel <riel@surriel.com> Reported-by: Breno Leitao <leitao@debian.org> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Transport's release() and destruct() are called when de-assigning the
vsock transport. These callbacks can touch some socket state like
sock flags, sk_state, and peer_shutdown.
Since we are reassigning the socket to a new transport during
vsock_connect(), let's reset these fields to have a clean state with
the new transport.
During virtio_transport_release() we can schedule a delayed work to
perform the closing of the socket before destruction.
The destructor is called either when the socket is really destroyed
(reference counter to zero), or it can also be called when we are
de-assigning the transport.
In the former case, we are sure the delayed work has completed, because
it holds a reference until it completes, so the destructor will
definitely be called after the delayed work is finished.
But in the latter case, the destructor is called by AF_VSOCK core, just
after the release(), so there may still be delayed work scheduled.
Refactor the code, moving the code to delete the close work already in
the do_close() to a new function. Invoke it during destruction to make
sure we don't leave any pending work.
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Cc: stable@vger.kernel.org Reported-by: Hyunwoo Kim <v4bel@theori.io> Closes: https://lore.kernel.org/netdev/Z37Sh+utS+iV3+eb@v4bel-B760M-AORUS-ELITE-AX/ Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Tested-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
In order to allow serialize() to be used from noinstr code, make it
__always_inline.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org>
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building
the header archive. These occur when a file that is open is unlinked
locally, but hasn't yet been closed. Such files are visible to the user
via the getdents() syscall and so programs may want to do things with them.
During the kernel build, such files may be made during the processing of
header files and the cleanup may get deferred by fput() which may result in
tar seeing these files when it reads the directory, but they may have
disappeared by the time it tries to open them, causing tar to fail with an
error. Further, we don't want to include them in the tarball if they still
exist.
With CONFIG_HEADERS_INSTALL=y, something like the following may be seen:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
The find warning doesn't seem to cause a problem.
Fix this by telling tar when called from in gen_kheaders.sh to exclude such
files. This only affects afs and nfs; cifs uses the Windows Hidden
attribute to prevent the file from being seen.
Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241213135013.2964079-2-dhowells@redhat.com
cc: Masahiro Yamada <masahiroy@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-kernel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the syzbot reproducer, the hfs_cat_rec for the root dir has type
HFS_CDR_FIL after being read with hfs_bnode_read() in hfs_super_fill().
This indicates it should be used as an hfs_cat_file, which is 102 bytes.
Only the first 70 bytes of that struct are initialized, however,
because the entrylength passed into hfs_bnode_read() is still the length of
a directory record. This causes uninitialized values to be used later on,
when the hfs_cat_rec union is treated as the larger hfs_cat_file struct.
Add a check to make sure the retrieved record has the correct type
for the root directory (HFS_CDR_DIR), and make sure we load the correct
number of bytes for a directory record.
Reported-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2db3c7526ba68f4ea776 Tested-by: syzbot+2db3c7526ba68f4ea776@syzkaller.appspotmail.com Tested-by: Leo Stone <leocstone@gmail.com> Signed-off-by: Leo Stone <leocstone@gmail.com> Link: https://lore.kernel.org/r/20241201051420.77858-1-leocstone@gmail.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add additional flow steering priorities in the RDMA namespace.
This allows adding flow counters to count filtered RDMA traffic and then
continue processing in the regular RDMA steering flow.
Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Stable-dep-of: c08d3e62b2e7 ("net/mlx5: Fix RDMA TX steering prio") Signed-off-by: Sasha Levin <sashal@kernel.org>
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could
potentially have an integer wrapping bug on 32bit systems. Check for
this and return an error.
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair per netns
and one unregister_netdevice_many() call per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20240206144313.2050392-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().") Signed-off-by: Sasha Levin <sashal@kernel.org>
Many (struct pernet_operations)->exit_batch() methods have
to acquire rtnl.
In presence of rtnl mutex pressure, this makes cleanup_net()
very slow.
This patch adds a new exit_batch_rtnl() method to reduce
number of rtnl acquisitions from cleanup_net().
exit_batch_rtnl() handlers are called while rtnl is locked,
and devices to be killed can be queued in a list provided
as their second argument.
A single unregister_netdevice_many() is called right
before rtnl is released.
exit_batch_rtnl() handlers are called before ->exit() and
->exit_batch() handlers.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20240206144313.2050392-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().") Signed-off-by: Sasha Levin <sashal@kernel.org>
There is only one caller for ops_free(), so inline it.
Separate net_drop_ns() and net_free(), so the net_free()
can be called directly.
Add free_exit_list() helper function for free net_exit_list.
====================
v2:
- v1 does not apply, rebase it.
====================
Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 46841c7053e6 ("gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().") Signed-off-by: Sasha Levin <sashal@kernel.org>
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Fixes: 64d85290d79c ("bpf: Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250110-reuseport-memleak-v1-1-fa1ddab0adfe@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPSW ALE has 75-bit ALE entries stored across three 32-bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions support
ALE field entries spanning up to two words at the most.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions work as
expected when ALE field spanned across word1 and word2, but fails when
ALE field spanned across word2 and word3.
For example, while reading the ALE field spanned across word2 and word3
(i.e. bits 62 to 64), the word3 data shifted to an incorrect position
due to the index becoming zero while flipping.
The same issue occurred when setting an ALE entry.
This issue has not been seen in practice but will be an issue in the future
if the driver supports accessing ALE fields spanning word2 and word3
Fix the methods to handle getting/setting fields spanning up to two words.
We should be disabling clocks when wake from USB is not needed. Since
this wasn't done, we had a clock imbalance since clocks were always
being enabled on resume.
Fixes: ae532b2b7aa5 ("phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers") Fixes: b0c0b66c0b43 ("phy: usb: Add support for wake and USB low power mode for 7211 S2/S5") Signed-off-by: Justin Chen <justinpopo6@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/1665005418-15807-7-git-send-email-justinpopo6@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:
[ 4.534229] adv7511 1-003d: failed to find dsi host
[ 4.580288] adv7511 1-003d: failed to find dsi host
This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Let's switch to the new devm MIPI-DSI function to register and attach
our secondary device. This also avoids leaking the device when we detach
the bridge.
Devices that take their data through the MIPI-DSI bus but are controlled
through a secondary bus like I2C have to register a secondary device on
the MIPI-DSI bus through the mipi_dsi_device_register_full() function.
At removal or when an error occurs, that device needs to be removed
through a call to mipi_dsi_device_unregister().
Let's create a device-managed variant of the registration function that
will automatically unregister the device at unbind.
When mounting ocfs2 and then remounting it as read-only, a
slab-use-after-free occurs after the user uses a syscall to
quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the
dangling pointer.
During the remounting process, the pointer dqi_priv is freed but is never
set as null leaving it to be accessed. Additionally, the read-only option
for remounting sets the DQUOT_SUSPENDED flag instead of setting the
DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the
next quota, the function ocfs2_get_next_id is called and only checks the
quota usage flags and not the quota suspended flags.
To fix this, I set dqi_priv to null when it is freed after remounting with
read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id.
[akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20241218023924.22821-2-dennis.lamerice@gmail.com Fixes: 8f9e8f5fcc05 ("ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas") Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com> Reported-by: syzbot+d173bf8a5a7faeede34c@syzkaller.appspotmail.com Tested-by: syzbot+d173bf8a5a7faeede34c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6731d26f.050a0220.1fb99c.014b.GAE@google.com/T/ Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now in ocfs2_local_free_info(), it returns 0 even if it actually fails.
Though it doesn't cause any real problem since the only caller
dquot_disable() ignores the return value, we'd better return correct as it
is.
Link: https://lkml.kernel.org/r/20230528132033.217664-1-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 5f3fd772d152 ("ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv") Signed-off-by: Sasha Levin <sashal@kernel.org>
When bringing up the PHY, it might be in a bad state if left powered.
One case is we lose the PLL lock if the PLL is gated while the PHY
is powered. Toggle the PHY power so we can start from a known state.
Fixes: 4e5b9c9a73b3 ("phy: usb: Add support for new Synopsys USB controller on the 7216") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241024213540.1059412-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add "wake on" support for the newer Synopsis based XHCI only controller.
This works on the 72165 and 72164 and newer chips and does not work
on 7216 based systems. Also switch the USB sysclk to a slower clock
on suspend to save additional power in S2. The clock switch will only
save power on the 72165b0 and newer chips and is a nop on older chips.
Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220215032422.5179-1-f.fainelli@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 0a92ea87bdd6 ("phy: usb: Toggle the PHY power during init") Signed-off-by: Sasha Levin <sashal@kernel.org>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device") Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition at startup between disabling power domains not
used and disabling clocks not used on the rk3328. When the clocks are
disabled first, the hevc power domain fails to shut off leading to a
splat of failures. Add the hevc core clock to the rk3328 power domain
node to prevent this condition.
In the error path of iio_channel_get_all(), iio_device_put() is called
on all IIO devices, which can cause a refcount imbalance. Fix this error
by calling iio_device_put() only on IIO devices whose refcounts were
previously incremented by iio_device_get().
Fixes: 314be14bb893 ("iio: Rename _st_ functions to loose the bit that meant the staging version.") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241204111342.1246706-1-joe@pf.is.s.u-tokyo.ac.jp Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current implementation of at91_ts_register() calls input_free_deivce()
on st->ts_input, however, the err label can be reached before the
allocated iio_dev is stored to st->ts_input. Thus call
input_free_device() on input instead of st->ts_input.
Fixes: 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241207043045.1255409-1-joe@pf.is.s.u-tokyo.ac.jp Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fxas21002c_trigger_handler() may fail to acquire sample data because
the runtime PM enters the autosuspend state and sensor can not return
sample data in standby mode..
Resume the sensor before reading the sample data into the buffer within the
trigger handler. After the data is read, place the sensor back into the
autosuspend state.
Fixes: a0701b6263ae ("iio: gyro: add core driver for fxas21002c") Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20241116152945.4006374-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org Fixes: 61fa5dfa5f52 ("iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-8-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org Fixes: c3a23ecc0901 ("iio: imu: kmx61: Add support for data ready triggers") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-5-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'buffer' local array is used to push data to userspace from a
triggered buffer, but it does not set an initial value for the single
data element, which is an u16 aligned to 8 bytes. That leaves at least
4 bytes uninitialized even after writing an integer value with
regmap_read().
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org Fixes: ec90b52c07c0 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'data' array is allocated via kmalloc() and it is used to push data
to user space from a triggered buffer, but it does not set values for
inactive channels, as it only uses iio_for_each_active_channel()
to assign new values.
Use kzalloc for the memory allocation to avoid pushing uninitialized
information to userspace.
Cc: stable@vger.kernel.org Fixes: 415f79244757 ("iio: Move IIO Dummy Driver out of staging") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-9-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'sample' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the temperature and the
timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp).
This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
This commit addresses an issue related to below kernel panic where
panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON
in functionsfs_bind, which easily leads to the following scenarios.
1.adb_write in adbd 2. UDC write via configfs
================= =====================
The adb_open, adb_read, and adb_write operations are invoked from the
daemon, but trying to bind the function is a process that is invoked by
UDC write through configfs, which opens up the possibility of a race
condition between the two paths. In this race scenario, the kernel panic
occurs due to the WARN_ON from functionfs_bind when panic_on_warn is
enabled. This commit fixes the kernel panic by removing the unnecessary
WARN_ON.
When device_add(&udev->dev) succeeds and a later call fails,
usb_new_device() does not properly call device_del(). As comment of
device_add() says, 'if device_add() succeeds, you should call
device_del() when you want to get rid of it. If device_add() has not
succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable <stable@kernel.org> Fixes: 9f8b17e643fe ("USB: make usbdevices export their device nodes instead of using a separate class") Signed-off-by: Ma Ke <make_ruc2021@163.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20241218071346.2973980-1-make_ruc2021@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's USB error when tegra board is shutting down:
[ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113
[ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113
[ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113
[ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead
[ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up
[ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3
LPM, port won't transit to U1/U2 when it's already suspended in U3,
hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang <waynec@nvidia.com> Cc: stable <stable@kernel.org> Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20241206074817.89189-1-kaihengf@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the regression introduced by commit d8c6edfa3f4e ("USB:
usblp: don't call usb_set_interface if there's a single alt"),
which causes that unsupported protocols can also be set via
ioctl when the num_altsetting of the device is 1.
Move the check for protocol support to the earlier stage.
Fixes: d8c6edfa3f4e ("USB: usblp: don't call usb_set_interface if there's a single alt") Cc: stable <stable@kernel.org> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com> Link: https://lore.kernel.org/r/20241212143852.671889-1-jerrysteve1101@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
