In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
While the code "looks" correct, the compiler has no way to know that
doing "fun" pointer math like this really isn't a write off the end of
the structure as there is no hint anywhere that the structure has data
at the end of it.
This causes the following build warning:
In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So revert it for now and it can come back in the future in a "sane" way
that either correctly makes the structure know that there is trailing
data, OR just the payload structure is properly referenced and zeroed
out.
Fixes: bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lizhi Xu <lizhi.xu@windriver.com> Link: https://lore.kernel.org/r/20250703171021.0aee1482@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data
ready-to-read response. As a result the intended use to wait until next
data becomes ready does not work.
User space snippet:
struct pollfd pollfd = {
.fd = open("/dev/pps0", O_RDONLY),
.events = POLLIN|POLLERR,
.revents = 0 };
while(1) {
poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
if(revents & EPOLLIN) { // always true
struct pps_fdata fdata;
memset(&fdata, 0, sizeof(memdata));
ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
}
}
Lets remember the last fetch event counter and compare this value
in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
Address and size-cells are 1 and the ftm timer node takes two address
spaces in "reg" property, so this should be in two <> tuples. Change
has no functional impact, but original code is confusing/less readable.
Change the function to dynamically allocate it instead.
There is probably a better way to do it since only two integer fields
inside of that structure are actually used, but this is the simplest
rework for the moment.
Fixes: 783db6851c18 ("ASoC: ops: Enforce platform maximum on initial value") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250610093057.2643233-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f1186a8d738661 ("ASoC: soc-dai: check return value at
snd_soc_dai_set_tdm_slot()") checks return value of
xlate_tdm_slot_mask() (A1)(A2).
/*
* ...
(Y) * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
* @rx_mask and @slot_width will be ignored.
* ...
*/
int snd_soc_dai_set_tdm_slot(...)
{
...
if (...)
(A1) ret = dai->driver->ops->xlate_tdm_slot_mask(...);
else
(A2) ret = snd_soc_xlate_tdm_slot_mask(...);
if (ret)
goto err;
...
}
snd_soc_xlate_tdm_slot_mask() (A2) will return -EINVAL if slots was 0 (X),
but snd_soc_dai_set_tdm_slot() allow to use it (Y).
(A) static int snd_soc_xlate_tdm_slot_mask(...)
{
...
if (!slots)
(X) return -EINVAL;
...
}
Call xlate_tdm_slot_mask() only if slots was non zero.
Reported-by: Giedrius Trainavičius <giedrius@blokas.io> Closes: https://lore.kernel.org/r/CAMONXLtSL7iKyvH6w=CzPTxQdBECf++hn8RKL6Y4=M_ou2YHow@mail.gmail.com Fixes: 7f1186a8d738661 ("ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/8734cdfx59.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To avoid deadlock, Commit 31651c607151 ("hfsplus: avoid deadlock
on file truncation") unlock extree before hfsplus_free_extents(),
and add check wheather extree is locked in hfsplus_free_extents().
However, when operations such as hfsplus_file_release,
hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed
concurrently in different files, it is very likely to trigger the
WARN_ON, which will lead syzbot and xfstest to consider it as an
abnormality.
The comment above this warning also describes one of the easy
triggering situations, which can easily trigger and cause
xfstest&syzbot to report errors.
Several threads could try to lock the shared extents tree.
And warning can be triggered in one thread when another thread
has locked the tree. This is the wrong behavior of the code and
we need to remove the warning.
The macro takes a parameter called "p" but references "fc" internally.
This happens to compile as long as callers pass a variable named fc,
but breaks otherwise. Rename the first parameter to “fc” to match the
usage and to be consistent with warnfc() / errorfc().
Fixes: a3ff937b33d9 ("prefix-handling analogues of errorf() and friends") Signed-off-by: RubenKelevra <rubenkelevra@gmail.com> Link: https://lore.kernel.org/20250617230927.1790401-1-rubenkelevra@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For mxs PHY, if there is a vbus but the bus is not enumerated, we need
to force the dp/dm as SE0 from the controller side. If not, there is
possible USB wakeup due to unstable dp/dm, since there is possible no
pull on dp/dm, such as there is a USB charger on the port.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627110353.1879477-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In `waveform_common_attach()`, the two timers `&devpriv->ai_timer` and
`&devpriv->ao_timer` are initialized after the allocation of the device
private data by `comedi_alloc_devpriv()` and the subdevices by
`comedi_alloc_subdevices()`. The function may return with an error
between those function calls. In that case, `waveform_detach()` will be
called by the Comedi core to clean up. The check that
`waveform_detach()` uses to decide whether to delete the timers is
incorrect. It only checks that the device private data was allocated,
but that does not guarantee that the timers were initialized. It also
needs to check that the subdevices were allocated. Fix it.
Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up") Cc: stable@vger.kernel.org # 6.15+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20250708130627.21743-1-abbotti@mev.co.uk
[ file location from drivers/comedi to drivers/staging/comedi and timer_delete_sync() to del_timer_sync(). ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zhivich [Wed, 23 Jul 2025 13:40:19 +0000 (09:40 -0400)]
x86/bugs: Fix use of possibly uninit value in amd_check_tsa_microcode()
For kernels compiled with CONFIG_INIT_STACK_NONE=y, the value of __reserved
field in zen_patch_rev union on the stack may be garbage. If so, it will
prevent correct microcode check when consulting p.ucode_rev, resulting in
incorrect mitigation selection.
This is a stable-only fix.
Cc: <stable@vger.kernel.org> Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Fixes: 78192f511f40 ("x86/bugs: Add a Transient Scheduler Attacks mitigation") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prevent inodes with invalid file types from tripping through the vfs
and causing malfunctions or assertion failures, add a missing sanity check
when reading an inode from a block device. If the file type is not valid,
treat it as a filesystem error.
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Tested-by: Vlad URSU <vlad@ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mute LED on the HP Pavilion Laptop 15-eg0xxx,
which uses the ALC287 codec, didn't work.
This patch fixes the issue by enabling the ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on a physical device, the LED now works as intended.
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.
Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1") Signed-off-by: Yang Xiwen <forbidden405@outlook.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the queried maximum of vf channels is the maximum of channels
supported by each TC. However, the actual maximum of channels is
the maximum of channels supported by the device.
Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, there are multiple members related to tc information
in struct hnae3_knic_private_info. Merge them into a new struct
hnae3_tc_info.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b3e75c0bcc53 ("net: hns3: fixed vf get max channels bug") Signed-off-by: Sasha Levin <sashal@kernel.org>
might_sleep could be trigger in the atomic context in qfq_delete_class.
qfq_destroy_class was moved into atomic context locked
by sch_tree_lock to avoid a race condition bug on
qfq_aggregate. However, might_sleep could be triggered by
qfq_destroy_class, which introduced sleeping in atomic context (path:
qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key
->might_sleep).
Considering the race is on the qfq_aggregate objects, keeping
qfq_rm_from_agg in the lock but moving the left part out can solve
this issue.
The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com> Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
net/appletalk/aarp.c:68: warning: Function parameter or member 'dev' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'expires_at' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'hwaddr' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'last_sent' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'next' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'packet_queue' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'status' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'target_addr' not described in 'aarp_entry'
net/appletalk/aarp.c:68: warning: Function parameter or member 'xmit_count' not described in 'aarp_entry'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'dev' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'orig_dev' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'pt' not described in 'atalk_rcv'
net/appletalk/ddp.c:1422: warning: Function parameter or member 'skb' not described in 'atalk_rcv'
Currently the tx_dropped field in VF stats is not updated correctly
when reading stats from the PF. This is because it reads from
i40e_eth_stats.tx_discards which seems to be unused for per VSI stats,
as it is not updated by i40e_update_eth_stats() and the corresponding
register, GLV_TDPC, is not implemented[1].
Use i40e_eth_stats.tx_errors instead, which is actually updated by
i40e_update_eth_stats() by reading from GLV_TEPC.
To test, create a VF and try to send bad packets through it:
As the comment in struct rtnl_link_stats64, rx_dropped should not
include packets dropped by the device due to buffer exhaustion.
They are counted in rx_missed_errors, procfs folds those two counters
together.
Add rx_missed_errors for buffer exhaustion, rx_missed_errors corresponds
to rx_discards, rx_dropped corresponds to rx_discards_other.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 50b2af451597 ("i40e: report VF tx_dropped with tx_errors instead of tx_discards") Signed-off-by: Sasha Levin <sashal@kernel.org>
The GID cache warning messages can flood the kernel log when there are
multiple failed attempts to add GIDs. This can happen when creating many
virtual interfaces without having enough space for their GIDs in the GID
table.
Change pr_warn to pr_warn_ratelimited to prevent log flooding while still
maintaining visibility of the issue.
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check.
Cc: <stable@vger.kernel.org> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adapted virtqueue_get_buf() to virtqueue_get_buf_ctx() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmap_pages_pte_range() enters the lazy MMU mode, but fails to leave it in
case an error is encountered.
Link: https://lkml.kernel.org/r/20250623075721.2817094-1-agordeev@linux.ibm.com Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202506132017.T1l1l6ME-lkp@intel.com/ Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io> Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com> Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This
blocks any subsequent attempts of probing the device, e.g. after a probe
deferral, with the following showing in the log:
[ 1.332226] usb30_prim_gdsc status stuck at 'off'
Leave the BCR deasserted when exiting the driver to avoid this issue.
When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with
echo "" > /sys/kernel/config/usb_gadget/<your_gadget>/UDC,
/sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED.
Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED.
Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop
to fix both cases.
Fixes: 49401f4169c0 ("usb: gadget: introduce gadget state tracking") Cc: stable@vger.kernel.org Co-authored-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com> Signed-off-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com> Signed-off-by: Drew Hamilton <drew.hamilton@zetier.com> Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of manipulating musb->xceiv->otg->state directly, use the newly
introduced musb_get_state() and musb_set_state() inline functions.
Later, these inline functions will be modified to get rid of the
musb->xceiv dependency, which prevents the musb code from using the
generic PHY subsystem.
Delayed work that prevents USB3 hubs from runtime-suspending too early
needed to be flushed in hub_quiesce() to resolve issues detected on
QC SC8280XP CRD board during suspend resume testing.
This flushing did however trigger new issues on Raspberry Pi 3B+, which
doesn't have USB3 ports, and doesn't queue any post resume delayed work.
The flushed 'hub->init_work' item is used for several purposes, and
is originally initialized with a 'NULL' work function. The work function
is also changed on the fly, which may contribute to the issue.
Solve this by creating a dedicated delayed work item for post resume work,
and flush that delayed work in hub_quiesce()
Cc: stable <stable@kernel.org> Fixes: a49e1e2e785f ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP CRD Tested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delayed work to prevent USB3 hubs from runtime-suspending immediately
after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection
of high tier USB3 devices behind suspended hubs").
This delayed work needs be flushed if system suspends, or hub needs to
be quiesced for other reasons right after resume. Not flushing it
triggered issues on QC SC8280XP CRD board during suspend/resume testing.
Fix it by flushing the delayed resume work in hub_quiesce()
The delayed work item that allow hub runtime suspend is also scheduled
just before calling autopm get. Alan pointed out there is a small risk
that work is run before autopm get, which would call autopm put before
get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.
Cc: stable <stable@kernel.org> Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3 devices connected behind several external suspended hubs may not
be detected when plugged in due to aggressive hub runtime pm suspend.
The hub driver immediately runtime-suspends hubs if there are no
active children or port activity.
There is a delay between the wake signal causing hub resume, and driver
visible port activity on the hub downstream facing ports.
Most of the LFPS handshake, resume signaling and link training done
on the downstream ports is not visible to the hub driver until completed,
when device then will appear fully enabled and running on the port.
This delay between wake signal and detectable port change is even more
significant with chained suspended hubs where the wake signal will
propagate upstream first. Suspended hubs will only start resuming
downstream ports after upstream facing port resumes.
The hub driver may resume a USB3 hub, read status of all ports, not
yet see any activity, and runtime suspend back the hub before any
port activity is visible.
This exact case was seen when conncting USB3 devices to a suspended
Thunderbolt dock.
USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating
USB3 devices expect to be resumed within 100ms after signaling wake.
if not then device will resend the wake signal.
Give the USB3 hubs twice this time (200ms) to detect any port
changes after resume, before allowing hub to runtime suspend again.
Cc: stable <stable@kernel.org> Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
htb_lookup_leaf has a BUG_ON that can trigger with the following:
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 htb rate 64bit
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2:1 handle 3: blackhole
ping -I lo -c1 -W0.001 127.0.0.1
The root cause is the following:
1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on
the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not
just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and
since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate ->
htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree,
__rb_change_child in __rb_erase_augmented sets the rb_root pointer to
NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL,
which causes htb_dequeue_tree to call htb_lookup_leaf with the same
hprio rbtree, and fail the BUG_ON
The function graph for this scenario is shown here:
0) | htb_enqueue() {
0) + 13.635 us | netem_enqueue();
0) 4.719 us | htb_activate_prios();
0) # 2249.199 us | }
0) | htb_dequeue() {
0) 2.355 us | htb_lookup_leaf();
0) | netem_dequeue() {
0) + 11.061 us | blackhole_enqueue();
0) | qdisc_tree_reduce_backlog() {
0) | qdisc_lookup_rcu() {
0) 1.873 us | qdisc_match_from_root();
0) 6.292 us | }
0) 1.894 us | htb_search();
0) | htb_qlen_notify() {
0) 2.655 us | htb_deactivate_prios();
0) 6.933 us | }
0) + 25.227 us | }
0) 1.983 us | blackhole_dequeue();
0) + 86.553 us | }
0) # 2932.761 us | qdisc_warn_nonwc();
0) | htb_lookup_leaf() {
0) | BUG_ON();
------------------------------------------
The full original bug report can be seen here [1].
We can fix this just by returning NULL instead of the BUG_ON,
as htb_dequeue_tree returns NULL when htb_lookup_leaf returns
NULL.
Assuming the "rx-vlan-filter" feature is enabled on a net device, the
8021q module will automatically add or remove VLAN 0 when the net device
is put administratively up or down, respectively. There are a couple of
problems with the above scheme.
The first problem is a memory leak that can happen if the "rx-vlan-filter"
feature is disabled while the device is running:
# ip link add bond1 up type bond mode 0
# ethtool -K bond1 rx-vlan-filter off
# ip link del dev bond1
When the device is put administratively down the "rx-vlan-filter"
feature is disabled, so the 8021q module will not remove VLAN 0 and the
memory will be leaked [1].
Another problem that can happen is that the kernel can automatically
delete VLAN 0 when the device is put administratively down despite not
adding it when the device was put administratively up since during that
time the "rx-vlan-filter" feature was disabled. null-ptr-unref or
bug_on[2] will be triggered by unregister_vlan_dev() for refcount
imbalance if toggling filtering during runtime:
$ ip link add bond0 type bond mode 0
$ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q
$ ethtool -K bond0 rx-vlan-filter off
$ ifconfig bond0 up
$ ethtool -K bond0 rx-vlan-filter on
$ ifconfig bond0 down
$ ip link del vlan0
Root cause is as below:
step1: add vlan0 for real_dev, such as bond, team.
register_vlan_dev
vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1
step2: disable vlan filter feature and enable real_dev
step3: change filter from 0 to 1
vlan_device_event
vlan_filter_push_vids
ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0
step4: real_dev down
vlan_device_event
vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0
vlan_info_rcu_free //free vlan0
step5: delete vlan0
unregister_vlan_dev
BUG_ON(!vlan_info); //vlan_info is null
Fix both problems by noting in the VLAN info whether VLAN 0 was
automatically added upon NETDEV_UP and based on that decide whether it
should be deleted upon NETDEV_DOWN, regardless of the state of the
"rx-vlan-filter" feature.
Configuration request only configure the incoming direction of the peer
initiating the request, so using the MTU is the other direction shall
not be used, that said the spec allows the peer responding to adjust:
Bluetooth Core 6.1, Vol 3, Part A, Section 4.5
'Each configuration parameter value (if any is present) in an
L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a
configuration parameter value that has been sent (or, in case of
default values, implied) in the corresponding
L2CAP_CONFIGURATION_REQ packet.'
That said adjusting the MTU in the response shall be limited to ERTM
channels only as for older modes the remote stack may not be able to
detect the adjustment causing it to silently drop packets.
This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name
suggest is to indicate a regular disconnection initiated by an user,
with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any
pairing shall be considered as failed.
Fixes: 1e91c29eb60c ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a command is received while a bonding is ongoing consider it a
pairing failure so the session is cleanup properly and the device is
disconnected immediately instead of continuing with other commands that
may result in the session to get stuck without ever completing such as
the case bellow:
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Identity Information (0x08) len 16
Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Signing Information (0x0a) len 16
Signature key[16]: 1716c536f94e843a9aea8b13ffde477d
Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX
> ACL Data RX: Handle 2048 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address: XX:XX:XX:XX:XX:XX (Intel Corporate)
While accourding to core spec 6.1 the expected order is always BD_ADDR
first first then CSRK:
When using LE legacy pairing, the keys shall be distributed in the
following order:
LTK by the Peripheral
EDIV and Rand by the Peripheral
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
LTK by the Central
EDIV and Rand by the Central
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
When using LE Secure Connections, the keys shall be distributed in the
following order:
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
According to the Core 6.1 for commands used for key distribution "Key
Rejected" can be used:
'3.6.1. Key distribution and generation
A device may reject a distributed key by sending the Pairing Failed command
with the reason set to "Key Rejected".
Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0]
l2cap_sock_resume_cb() has a similar problem that was fixed by commit 1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()").
Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed
under l2cap_sock_resume_cb(), we can avoid the issue simply by checking
if chan->data is NULL.
Let's not access to the killed socket in l2cap_sock_resume_cb().
[0]:
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711
Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
The buggy address belongs to the object at ffff888122bf96c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 24 bytes inside of
freed 704-byte region [ffff888122bf96c0, ffff888122bf9980)
Memory state around the buggy address: ffff888122bf9580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888122bf9600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888122bf9680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
^ ffff888122bf9700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888122bf9780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: a7a29f9c361f8 ("net: ipv6: add rpl sr tunnel") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing post-increment operators for byte pointers in the
loop that copies remaining bytes in xemaclite_aligned_read().
Without the increment, the same byte was written repeatedly
to the destination.
This update aligns with xemaclite_aligned_write()
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case.
Correct some left shifts of the signed integer constant 1 by some
unsigned number less than 32. Change the constant to 1U to avoid
shifting a 1 into the sign bit.
The corrected functions are comedi_dio_insn_config(),
comedi_dio_update_state(), and __comedi_device_postconfig().
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test.
Reported-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c52293513298e0fd9a94 Fixes: 729988507680 ("staging: comedi: das16m1: tidy up the irq support in das16m1_attach()") Tested-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com Suggested-by: "Enju, Kohei" <enjuk@amazon.co.jp> Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20250707130908.70758-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: ad7a370c8be4 ("staging: comedi: aio_iiro_16: add command support for change of state detection") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20250707134622.75403-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().
Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IIO core issues warnings when a scan mask is a subset of a previous
entry in the available_scan_masks array.
On a board using a MAX11601, the following warning is observed:
max1363 1-0064: available_scan_mask 7 subset of 6. Never used
This occurs because the entries in the max11607_mode_list[] array are not
ordered correctly. To fix this, reorder the entries so that no scan mask is
a subset of an earlier one.
While at it, reorder the mode_list[] arrays for other supported chips as
well, to prevent similar warnings on different variants.
Note fixes tag dropped as these were introduced over many commits a long
time back and the side effect until recently was a reduction in sampling
rate due to reading too many channels when only a few were desired.
Now we have a sanity check that reports this error but that is not
where the issue was introduced.
Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"),
booting a board populated with a MAX11601 results in a flood of warnings:
max1363 1-0064: available_scan_mask 8 subset of 0. Never used
max1363 1-0064: available_scan_mask 9 subset of 0. Never used
max1363 1-0064: available_scan_mask 10 subset of 0. Never used
max1363 1-0064: available_scan_mask 11 subset of 0. Never used
max1363 1-0064: available_scan_mask 12 subset of 0. Never used
max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...
These warnings are caused by incorrect offsets used for differential
channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.
The max1363_mode_table[] defines the differential channel mappings as
follows:
Free the kfifo after unregistering the miscdev in
aspeed_lpc_disable_snoop() as the kfifo is initialised before the
miscdev in aspeed_lpc_enable_snoop().
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Cc: stable@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-1-3cdd59c934d3@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Errata i2312 [0] for K3 silicon mentions the maximum obtainable
timeout through MMC host controller is 700ms. And for commands taking
longer than 700ms, hardware timeout should be disabled and software
timeout should be used.
The workaround for Errata i2312 can be achieved by adding
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci_am654.
Disable command queuing on Intel GLK-based Positivo models.
Without this quirk, CQE (Command Queuing Engine) causes instability
or I/O errors during operation. Disabling it ensures stable
operation on affected devices.
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result.
Cc: stable@vger.kernel.org Fixes: b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/b13c5225-7eff-448c-badc-a2c98e9bcaca@sabinyo.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes: 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET") Cc: stable@kernel.org Suggested-by: LongJun Tang <tanglongjun@kylinos.cn> Signed-off-by: Yun Lu <luyun@kylinos.cn> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the changes in commit 581073f626e3 ("af_packet: do not call
packet_read_pending() from tpacket_destruct_skb()"), every time
tpacket_destruct_skb() is executed, the skb_completion is marked as
completed. When wait_for_completion_interruptible_timeout() returns
completed, the pending_refcnt has not yet been reduced to zero.
Therefore, when ph is NULL, the wait function may need to be called
multiple times until packet_read_pending() finally returns zero.
We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO
constraint could be way off.
Fixes: 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()") Cc: stable@kernel.org Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yun Lu <luyun@kylinos.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new warning in clang [1] points out a place in pep_sock_accept() where
dst is uninitialized then passed as a const pointer to pep_find_pipe():
net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
829 | newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
| ^~~:
Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to
before the call to pep_find_pipe(), so that dst is consistently used
initialized throughout the function.
hid_hw_raw_request() is actually useful to ensure the provided buffer
and length are valid. Directly calling in the low level transport driver
function bypassed those checks and allowed invalid paramto be used.
Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250710-report-size-null-v2-3-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
When the report ID is not used, the low level transport drivers expect
the first byte to be 0. However, currently the allocated buffer not
account for that extra byte, meaning that instead of having 8 guaranteed
bytes for implement to be working, we only have 7.
Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Suggested-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20250710-report-size-null-v2-1-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma_sync_sg_for_device() functions should be called with the same
nents as the dma_map_sg(), not the value the map function returned
according to the documentation in Documentation/core-api/dma-api.rst:450:
With the sync_sg API, all the parameters must be the same
as those passed into the sg mapping API.
The tb_dp_port_set_hops() function was incorrectly clearing
ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's
purpose, it should clear both TX and RX AUX HopID fields. Replace the
first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper
configuration of both AUX directions.
Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec") Cc: stable@vger.kernel.org Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately.
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode.
Fixes: 49d46e3c7e59 ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
Synthesize the TSA CPUID feature bits for guests. Set TSA_{SQ,L1}_NO on
unaffected machines.
[ backporting notes: 5.10 doesn't have the KVM-only CPUID leafs so
allocate a separate capability leaf for CPUID_8000_0021_ECX to avoid
backporting the world and more. ]
projects / thirdparty / kernel / stable.git / log
