George Shen [Mon, 6 Oct 2025 15:23:31 +0000 (11:23 -0400)]
drm/amd/display: Add interface to capture power feature status for debug logging
[Why]
The status of various power features is often important information when
debugging certain issues, such as underflow. This info helps to
narrow down the potential sources of errors.
[How]
Add dc interface to capture power feature enablement status.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ivan Lipski [Thu, 23 Oct 2025 14:03:59 +0000 (10:03 -0400)]
drm/amd/display: Allow VRR params change if unsynced with the stream
[Why]
When changing resolution (e.g., 4K → FHD) in mirror/clone mode with
certain monitors, the monitor blanks and loses connection due to an early
exit in vrr_settings_require_update(). The function only checks if VRR
state, fixed refresh target, or min/max refresh rate range has changed.
During mode changes, if the calculated min/max refresh values remain the
same even though the stream's v_total changed, the function returns early
without updating vrr_params.adjust.v_total_min/max, leaving the monitor's
VRR timing parameters unsynced with the new mode, causing it to blank out.
[How]
Explicitly adjust VRR parameters to the stream's nominal v_total when VRR
is supported, but inactive.
Fixes: 6d31602a9f57 ("drm/amd/display: more liberal vmin/vmax update for freesync") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gangliang Xie [Thu, 6 Nov 2025 03:06:21 +0000 (11:06 +0800)]
drm/amd/pm: remove unnecessary prints for smu busy
smu busy is a normal case when calling SMU_MSG_GetBadPageCount, so no need
to print error status at each time.Instead, only print error status when
timeout given by user is reached.
Tao Zhou [Thu, 6 Nov 2025 08:26:56 +0000 (16:26 +0800)]
drm/amdgpu: optimize timeout implemention in ras_eeprom_update_record_num
The busy status returned by ras_eeprom_update_record_num may not be
an error, increase timeout to exclude false busy status. Also add more
comments to make the code readable.
v2: define a macro for the timeout value.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse.Zhang [Fri, 24 Oct 2025 08:09:25 +0000 (16:09 +0800)]
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
Fix a potential deadlock caused by inconsistent spinlock usage
between interrupt and process contexts in the userq fence driver.
The issue occurs when amdgpu_userq_fence_driver_process() is called
from both:
- Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process()
- Process context: amdgpu_eviction_fence_suspend_worker() ->
amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process()
In interrupt context, the spinlock was acquired without disabling
interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock
is acquired in process context, the kernel detects inconsistent
locking since the process context acquisition would enable interrupts
while holding a lock previously acquired in interrupt context.
Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly
manage interrupt state regardless of calling context.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_sched_entity_init wasn't called yet, so the only thing to
do is to release allocated memory.
This doesn't fix any bug since entity is zero allocated and
drm_sched_entity_fini does nothing in this case.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Clarify that amdgpu.audio only works for non-DC
The comment already explains it but the module parameter help text
doesn't.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4684 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Thu, 6 Nov 2025 17:35:53 +0000 (12:35 -0500)]
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
Certain multi-GPU configurations (especially GFX12) may hit
data corruption when a DCC-compressed VRAM surface is shared across GPUs
using peer-to-peer (P2P) DMA transfers.
Such surfaces rely on device-local metadata and cannot be safely accessed
through a remote GPU’s page tables. Attempting to import a DCC-enabled
surface through P2P leads to incorrect rendering or GPU faults.
This change disables P2P for DCC-enabled VRAM buffers that are contiguous
and allocated on GFX12+ hardware. In these cases, the importer falls back
to the standard system-memory path, avoiding invalid access to compressed
surfaces.
Future work could consider optional migration (VRAM→System→VRAM) if a
performance regression is observed when `attach->peer2peer = false`.
Tested on:
- Dual RX 9700 XT (Navi4x) setup
- GNOME and Wayland compositor scenarios
- Confirmed no corruption after disabling P2P under these conditions
v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS.
v3: simplify for upsteam and fix ip version check (Alex)
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 6 Nov 2025 05:49:18 +0000 (13:49 +0800)]
drm/amd/display: add macros to simplify code
[Why & How]
Adding macros to simplify the process of adding new error codes.
Currently, to add an error code, the developer needs to add both the
enum and the string translation. This is error prone and can lead to
inconsistencies. The refactor adds a macro to automatically add the
string translation based on the enum.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 7 Nov 2025 02:40:51 +0000 (12:40 +1000)]
Merge tag 'drm-misc-next-2025-11-05-1' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Dave Airlie [Thu, 6 Nov 2025 23:45:38 +0000 (09:45 +1000)]
Merge tag 'drm-intel-next-2025-11-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Asad Kamal [Thu, 6 Nov 2025 06:11:45 +0000 (14:11 +0800)]
drm/amd/pm: Update default power1_cap
Update default power1_cap to max limit for smu_v13_0_6 and smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Wed, 5 Nov 2025 02:36:31 +0000 (10:36 +0800)]
drm/amd/display: Enable mst when it's detected but yet to be initialized
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f548 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT") Cc: Fangzhi Zuo <jerry.zuo@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Wed, 23 Jul 2025 11:04:17 +0000 (19:04 +0800)]
drm/amdgpu: add ras_eeprom_read_idx interface
PMFW will manage RAS eeprom data by itself, add new interface to read
eeprom data via PMFW, we can read part of records by setting index.
v2: use IPID parse interface.
pa is not used and set it to a fixed value.
v3: optimize the null pointer check for IPID parse interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Fix suspend failure with secure display TA
commit c760bcda83571 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b61e ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679 Fixes: c760bcda8357 ("drm/amd: Check whether secure display TA loaded successfully") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Zhang [Wed, 5 Nov 2025 03:04:08 +0000 (03:04 +0000)]
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unref bo after amdgpu_bo_reserve() failure as it has
called amdgpu_bo_ref() already
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alok Tiwari [Fri, 17 Oct 2025 19:16:21 +0000 (12:16 -0700)]
drm: rcar-du: fix incorrect return in rcar_du_crtc_cleanup()
The rcar_du_crtc_cleanup() function has a void return type, but
incorrectly uses a return statement with a call to drm_crtc_cleanup(),
which also returns void.
Remove the return statement to ensure proper function semantics.
No functional change intended.
Karol Wachowski [Tue, 4 Nov 2025 13:24:18 +0000 (14:24 +0100)]
accel/ivpu: Improve debug and warning messages
Add IOCTL debug bit for logging user provided parameter validation
errors.
Refactor several warning and error messages to better reflect fault
reason. User generated faults should not flood kernel messages with
warnings or errors, so change those to ivpu_dbg(). Add additional debug
logs for parameter validation in IOCTLs.
Check size provided by in metric streamer start and return -EINVAL
together with a debug message print.
Lizhi Hou [Tue, 4 Nov 2025 06:25:43 +0000 (22:25 -0800)]
accel/amdxdna: Add hardware specific attributes
Add three hardware specific attributes to describe device capabilities:
hwctx_limit: The maximum number of hardware context supported.
max_tops: The maximum TOPS supported.
curr_tops: The TOPS achievable with the current power and frequency
configuration.
Alex Deucher [Wed, 22 Oct 2025 21:11:38 +0000 (17:11 -0400)]
drm/amdgpu: fix possible fence leaks from job structure
If we don't end up initializing the fences, free them when
we free the job. We can't set the hw_fence to NULL after
emitting it because we need it in the cleanup path for the
submit direct case.
v2: take a reference to the fences if we emit them
v3: handle non-job fence in error paths
Fixes: db36632ea51e ("drm/amdgpu: clean up and unify hw fence handling") Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> (v1) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YiPeng Chai [Tue, 28 Oct 2025 08:18:31 +0000 (16:18 +0800)]
drm/amdgpu: suspend ras module before gpu reset
During gpu reset, all GPU-related resources are
inaccessible. To avoid affecting ras functionality,
suspend ras module before gpu reset and resume
it after gpu reset is complete.
V2:
Rename functions to avoid misunderstanding.
V3:
Move flush_delayed_work to amdgpu_ras_process_pause,
Move schedule_delayed_work to amdgpu_ras_process_unpause.
V4:
Rename functions.
V5:
Move the function to amdgpu_ras.c.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Gangliang Xie <ganglxie@amd.com> Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/pm: implement ras_smu_drv interface for smu v13.0.12
implement ras_smu_drv interface for smu v13.0.12
Signed-off-by: Gangliang Xie <ganglxie@amd.com> Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 29 Oct 2025 13:41:04 +0000 (09:41 -0400)]
Revert "drm/amdkfd: Improve signal event slow path"
To fix regression report on gfx8, which requires the exhaustive search
path for signaled event.
The high CPU usage of KFD interrupt wq issue is gone after HIP/ROCr add
option to reduce HW event interrupts, safe to revert this optimization
patch now.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rong Zhang [Mon, 13 Oct 2025 16:47:35 +0000 (00:47 +0800)]
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
When a connector is connected but inactive (e.g., disabled by desktop
environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading
odm_combine_segments causes kernel NULL pointer dereference.
Philip Yang [Fri, 31 Oct 2025 14:50:02 +0000 (10:50 -0400)]
drm/amdkfd: Don't clear PT after process killed
If process is killed. the vm entity is stopped, submit pt update job
will trigger the error message "*ERROR* Trying to push to a killed
entity", job will not execute.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Mon, 18 Aug 2025 06:33:41 +0000 (12:03 +0530)]
drm/amd/pm: Add schema v1.1 for parition metrics
Use a schema similar to gpu metrics v1.9 for partition metrics also. It
will have field type encoded followed by the field value(s). The
attribute ids used will be shared with gpu metrics. The structure
definition is only to distinguish between gpu metrics and partition
metrics though both gpu metrics v1.9 and partition metrics v1.1 follow
the same definition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunil Khatri [Fri, 31 Oct 2025 08:40:13 +0000 (14:10 +0530)]
drm/amdgpu: validate the bo from done list for NULL
Make sure the bo is valid before using it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: lock bo before calling amdgpu_vm_bo_update_shared
BO's reservation object must be locked before using
amdgpu_vm_bo_update_shared otherwise dma_resv_assert_held will
complain in amdgpu_vm_update_shared.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 31 Oct 2025 08:21:36 +0000 (09:21 +0100)]
drm/amdgpu: grab a BO reference in vm_lock_done_list.
Otherwise it is possible that between dropping the status lock and
locking the BO that the BO is freed up.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiang Liu [Thu, 30 Oct 2025 14:38:49 +0000 (22:38 +0800)]
drm/amd/ras: Fix format truncation
../ras/rascore/ras_cper.c: In function ‘cper_generate_fatal_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../ras/rascore/ras_cper.c: In function ‘cper_generate_runtime_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Sat, 25 Oct 2025 00:38:14 +0000 (19:38 -0500)]
drm/amd/display: Promote DC to 3.2.357
This version brings along following update:
- HDCP2 FW locality check refactors
- Fix black screen issue with HDMI output
- Increase IB mem size
- Revert max buffered cursor size to 64
- Extend inbox0 lock to run Replay / PSR
- Refactor VActive implementation
- Add Pstate viewport reduction
- Persist stream refcount through restore
Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Fri, 24 Oct 2025 22:42:39 +0000 (18:42 -0400)]
drm/amd/display: [FW Promotion] Release 0.1.34.0
Release hightlights
DCN35/36
* Dynamically clock gate before and after prefetch
Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Wed, 22 Oct 2025 22:19:34 +0000 (16:19 -0600)]
drm/amd/display: Fix black screen with HDMI outputs
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters") Suggested-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Thu, 23 Oct 2025 17:56:32 +0000 (13:56 -0400)]
drm/amd/display: Increase IB mem size
[Why & How]
Increase IB mem size to match size of largest structure that will
use IB transfer between driver and DMU.
Reviewed-by: Oleh Kuzhylnyi <oleh.kuzhylnyi@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 23 Oct 2025 21:07:04 +0000 (17:07 -0400)]
drm/amd/display: Revert DCN4 max buffered cursor size to 64
[Why & How]
The buffered cursor cap is expressed assuming a square cursor, and usage
of the cursor buffer is limited by the request size. For greater than 32
pixels, the request size is fixed at 256 bytes, so the maximum width
must be floored to the nearest 256th byte. At 4bpp this means even with
24kB DCN4 can only hold a 64x64 cursor in the buffer as even 65 pixels
would require 512 bytes per line instead of 256.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Thu, 23 Oct 2025 20:43:56 +0000 (16:43 -0400)]
drm/amd/display: Persist stream refcount through restore
[Why & How]
Overwriting the refcount on stream restore can lead to double-free errors
or memory leaks if an unbalanced number of retains and releases occurs
between a backup and restore.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Austin Zheng [Fri, 3 Oct 2025 14:39:49 +0000 (10:39 -0400)]
drm/amd/display: Refactor VActive implementation
[Why & How]
Refactors VActive accounting in PMO, and breaks down fill time
requirement by P-State type as it can result in drasitcally different
bandwidth requirements depending on the blackout length.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Mazour [Wed, 15 Oct 2025 16:19:49 +0000 (12:19 -0400)]
drm/amd/display: Extend inbox0 lock to run Replay/PSR
[Why]
The inbox1 infrastructure is deprecated, so to support display
power features requiring a DMUB interlock moving forward extend
the inbox0 locking conditions to also include Replay or PSR.
[How]
Implemented a series of changes to improve HW lock handling:
- Deprecated should_use_dmub_inbox1_lock() and guarded it with
DCN401 flag.
- Migrated lock checks into inbox0 helpers and added PSR/Replay
enablement checks to ensure correct behavior.
- Updated HWSS fast update path to acquire HW lock as needed
using the new helpers.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Andrew Mazour <Andrew.Mazour@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Fri, 3 Oct 2025 15:59:39 +0000 (11:59 -0400)]
drm/amd/display: fw locality check refactors
[why]
There are some new changes for HDCP2 firmware locality check. The
implementation doesn't perfectly fit the intended design and clarity.
1. Clarify and consolidate variable responsibilities.
The previous implementation introduced the following variables:
- config.ddc.funcs.atomic_write_poll_read_i2c (optional pointer)
- hdcp->config.ddc.funcs.atomic_write_poll_read_aux (optional pointer)
- hdcp->connection.link.adjust.hdcp2.force_sw_locality_check (bool)
- hdcp->config.debug.lc_enable_sw_fallback (bool)
- use_fw (bool)
They will be used together to determine two operations:
- Whether to use FW locality check
- Whether to use SW fallback on FW locality check failure
The refactor streamlines this by introducing two variables in the hdcp2
link adjustment, while ensuring function pointers are always assigned
and remain independent from policy decisions:
- use_fw_locality_check (bool) -> true if fw locality should be used.
- use_sw_locality_fallback (bool) -> true to reset use_fw_locality_check
back to false and retry on fw locality check failure.
2. Mixed meanings of l_prime_read transition input
l_prime_read originally means if l_prime is read when sw locality check
is used. When FW locality check is used, l_prime_read means if lc init
write, l prime poll and l_prime read combo operation is successful. The
mix of meanings is confusing. The refactor introduces a new variable
l_prime_combo_read to isolate the second meaning into its own variable.
3. Missing specific error code on firmware locality error.
The original change reuses the generic DDC failure error code when
firmware fails to return locality check result. This is not ideal as
DDC failure indicates an error occurred during an I2C/AUX transaction.
FW locality failure could be caused by polling timeout in firmware or
failure to acquire firmware access. Which sits at a higher level of
abstraction above DDC hardware. An incorrect error code could mislead
the debug into a wrong direction.
4. Correcting misplaced comments. The previous implementation of the
firmware locality check resulted in some comments in hdcp2_transition
being incorrectly positioned. This refactor relocates those comments to
their appropriate locations for better clarity.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse.Zhang [Fri, 24 Oct 2025 02:51:52 +0000 (10:51 +0800)]
drm/amdgpu: Implement user queue reset functionality
This patch adds robust reset handling for user queues (userq) to improve
recovery from queue failures. The key components include:
1. Queue detection and reset logic:
- amdgpu_userq_detect_and_reset_queues() identifies failed queues
- Per-IP detect_and_reset callbacks for targeted recovery
- Falls back to full GPU reset when needed
2. Reset infrastructure:
- Adds userq_reset_work workqueue for async reset handling
- Implements pre/post reset handlers for queue state management
- Integrates with existing GPU reset framework
3. Error handling improvements:
- Enhanced state tracking with HUNG state
- Automatic reset triggering on critical failures
- VRAM loss handling during recovery
4. Integration points:
- Added to device init/reset paths
- Called during queue destroy, suspend, and isolation events
- Handles both individual queue and full GPU resets
The reset functionality works with both gfx/compute and sdma queues,
providing better resilience against queue failures while minimizing
disruption to unaffected queues.
v2: add detection and reset calls when preemption/unmaped fails.
add a per device userq counter for each user queue type.(Alex)
v3: make sure we hold the adev->userq_mutex when we call amdgpu_userq_detect_and_reset_queues. (Alex)
warn if the adev->userq_mutex is not held.
v4: make sure we have all of the uqm->userq_mutex held.
warn if the uqm->userq_mutex is not held.
v5: Use array for user queue type counters.(Alex)
all of the uqm->userq_mutex need to be held when calling detect and reset. (Alex)
v6: fix lock dep warning in amdgpu_userq_fence_dence_driver_process
v7: add the queue types in an array and use a loop in amdgpu_userq_detect_and_reset_queues (Lijo)
v8: remove atomic_set(&userq_mgr->userq_count[i], 0).
it should already be 0 since we kzalloc the structure (Alex)
v9: For consistency with kernel queues, We may want something like:
amdgpu_userq_is_reset_type_supported (Alex)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Don't stretch non-native images by default in eDP
commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native
resolutions on eDP") started using the GPU scaler hardware to scale
when a non-native resolution was picked on eDP. This scaling was done
to fill the screen instead of maintain aspect ratio.
The idea was supposed to be that if a different scaling behavior is
preferred then the compositor would request it. The not following
aspect ratio behavior however isn't desirable, so adjust it to follow
aspect ratio and still try to fill screen.
Note: This will lead to black bars in some cases for non-native
resolutions. Compositors can request the previous behavior if desired.
Fixes: 978fa2f6d0b1 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunday Clement [Mon, 27 Oct 2025 18:00:59 +0000 (14:00 -0400)]
drm/amdkfd: Fix Unchecked Return Values
Properly Check for return values from calls to debug functions in
runtime_disable().
v2: storing the last non zero returned value from the loop.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com> Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If device suspend has failed, add a recovery flow that will attempt
to unwind the suspend and get things back up and running.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4627 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Add an unwind for failures in amdgpu_device_ip_suspend_phase2()
If any hardware IPs involved with the second phase of suspend fail, unwind
all steps to restore back to original state.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd: Add an unwind for failures in amdgpu_device_ip_suspend_phase1()
If any hardware IPs involved with the first phase of suspend fail, unwind
all steps to restore back to original state.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Sun, 26 Oct 2025 04:29:36 +0000 (23:29 -0500)]
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lukas Bulwahn [Thu, 30 Oct 2025 14:37:37 +0000 (15:37 +0100)]
MAINTAINERS: adjust file entry in AMD DISPLAY CORE - DML
Commit e6a8a000cfe6 ("drm/amd/display: Rename dml2 to dml2_0 folder")
renames the directory dml2 to dml2_0 in ./drivers/gpu/drm/amd/display/dc,
but misses to adjust the file entry in AMD DISPLAY CORE - DML.
Adjust the file entry after this directory renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timur Kristóf [Thu, 30 Oct 2025 09:15:56 +0000 (10:15 +0100)]
drm/amd/pm/si: Delete unused structs and fields
The contents of si_dpm.h seem to have been copied from the
old radeon driver, including a lot of structs and fields which
were only relevant to GPU generations even older than SI.
A lot of these can be deleted without causing much churn to the
actual SI DPM code. Let's delete them to make the code easier
to understand.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Mon, 11 Aug 2025 13:37:05 +0000 (19:07 +0530)]
drm/amd/pm: Add helper functions for gpu metrics
Add helper macros to define metrics struct definitions. It will define
structs with field type followed by actual field. A helper macro is also
added to initialize the field encoding for all fields and to initialize
the field members to 0xFFs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Thu, 30 Oct 2025 05:06:24 +0000 (13:06 +0800)]
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
Use the correct label to complete all cleanup work.
Fixes: 4d154b1ca580 ("drm/amd/pm: Add support for DPM policies") Fixes: 25e82f2e2c59 ("drm/amd/pm: Add temperature metrics sysfs entry") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yang Wang [Mon, 27 Oct 2025 07:22:54 +0000 (15:22 +0800)]
drm/amd/pm: fix the issue of size calculation error for smu 13.0.6
v1:
the driver should handle return value of smu_v13_0_6_printk_clk_levels()
to return the correct size for sysfs reads.
v2:
fix the issue of size calculation error in smu_v13_0_6_print_clks()
Fixes: cdfdec6f1608 ("drm/amd/pm: Avoid writing nulls into `pp_od_clk_voltage`") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / kernel / linux.git / log
