Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.
This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.
The last user of btrfs_bio::flags was removed in commit 326e1dbb5736
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.
(Tagged for stable as the structure is heavily used and space savings
are desirable.)
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a cyclic writeback, extent_write_cache_pages() uses done_index
to update the writeback_index after the current run is over. However,
instead of current index + 1, it gets to to the current index itself.
Unfortunately, this, combined with returning on EOF instead of looping
back, can lead to the following pathlogical behavior.
1. There is a single file which has accumulated enough dirty pages to
trigger balance_dirty_pages() and the writer appending to the file
with a series of short writes.
2. balance_dirty_pages kicks in, wakes up background writeback and sleeps.
3. Writeback kicks in and the cursor is on the last page of the dirty
file. Writeback is started or skipped if already in progress. As
it's EOF, extent_write_cache_pages() returns and the cursor is set
to done_index which is pointing to the last page.
4. Writeback is done. Nothing happens till balance_dirty_pages
finishes, at which point we go back to #1.
This can almost completely stall out writing back of the file and keep
the system over dirty threshold for a long time which can mess up the
whole system. We encountered this issue in production with a package
handling application which can reliably reproduce the issue when
running under tight memory limits.
Reading the comment in the error handling section, this seems to be to
avoid accidentally skipping a page in case the write attempt on the
page doesn't succeed. However, this concern seems bogus.
On each page, the code either:
* Skips and moves onto the next page.
* Fails issue and sets done_index to index + 1.
* Successfully issues and continue to the next page if budget allows
and not EOF.
IOW, as long as it's not EOF and there's budget, the code never
retries writing back the same page. Only when a page happens to be
the last page of a particular run, we end up retrying the page, which
can't possibly guarantee anything data integrity related. Besides,
cyclic writes are only used for non-syncing writebacks meaning that
there's no data integrity implication to begin with.
Fix it by always setting done_index past the current page being
processed.
Note that this problem exists in other writepages too.
CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a buffered write it's possible to leave the subv_writers
counter of the root, used for synchronization between buffered nocow
writers and snapshotting. This happens in an exceptional case like the
following:
1) We fail to allocate data space for the write, since there's not
enough available data space nor enough unallocated space for allocating
a new data block group;
2) Because of that failure, we try to go to NOCOW mode, which succeeds
and therefore we set the local variable 'only_release_metadata' to true
and set the root's sub_writers counter to 1 through the call to
btrfs_start_write_no_snapshotting() made by check_can_nocow();
3) The call to btrfs_copy_from_user() returns zero, which is very unlikely
to happen but not impossible;
4) No pages are copied because btrfs_copy_from_user() returned zero;
5) We call btrfs_end_write_no_snapshotting() which decrements the root's
subv_writers counter to 0;
6) We don't set 'only_release_metadata' back to 'false' because we do
it only if 'copied', the value returned by btrfs_copy_from_user(), is
greater than zero;
7) On the next iteration of the while loop, which processes the same
page range, we are now able to allocate data space for the write (we
got enough data space released in the meanwhile);
8) After this if we fail at btrfs_delalloc_reserve_metadata(), because
now there isn't enough free metadata space, or in some other place
further below (prepare_pages(), lock_and_cleanup_extent_if_need(),
btrfs_dirty_pages()), we break out of the while loop with
'only_release_metadata' having a value of 'true';
9) Because 'only_release_metadata' is 'true' we end up decrementing the
root's subv_writers counter to -1 (through a call to
btrfs_end_write_no_snapshotting()), and we also end up not releasing the
data space previously reserved through btrfs_check_data_free_space().
As a consequence the mechanism for synchronizing NOCOW buffered writes
with snapshotting gets broken.
Fix this by always setting 'only_release_metadata' to false at the start
of each iteration.
Fixes: 8257b2dc3c1a ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume") Fixes: 7ee9e4405f26 ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the fixup worker, if we fail to mark the range as delalloc in the io
tree, we must release the previously reserved metadata, as well as update
the outstanding extents counter for the inode, otherwise we leak metadata
space.
In pratice we can't return an error from btrfs_set_extent_delalloc(),
which is just a wrapper around __set_extent_bit(), as for most errors
__set_extent_bit() does a BUG_ON() (or panics which hits a BUG_ON() as
well) and returning an -EEXIST error doesn't happen in this case since
the exclusive bits parameter always has a value of 0 through this code
path. Nevertheless, just fix the error handling in the fixup worker,
in case one day __set_extent_bit() can return an error to this code
path.
Fixes: f3038ee3a3f101 ("btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is because the free side drops the ref without the lock, and then
takes the lock if our refcount is 0. So you can have nodes on the tree
that have a refcount of 0. Fix this by zero'ing out that element in our
temporary array so we don't try to kill it again.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The page we were trying to drop had a page->private, but had no
page->mapping and so called drop_buffers, assuming that we had a
buffer_head on the page, and then panic'ed trying to deref 1, which is
our page->private for data pages.
This is happening because we're truncating the free space cache while
we're trying to load the free space cache. This isn't supposed to
happen, and I'll fix that in a followup patch. However we still
shouldn't allow those sort of mistakes to result in messing with pages
that do not belong to us. So add the page->mapping check to verify that
we still own this page after dropping and re-acquiring the page lock.
This page being unlocked as:
btrfs_readpage
extent_read_full_page
__extent_read_full_page
__do_readpage
if (!nr)
unlock_page <-- nr can be 0 only if submit_extent_page
returns an error
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add callchain ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().
Reported-by: Pavel Machek <pavel@denx.de> Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@denx.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is
completed. Otherwise, we can't start control transfer again after
END_TRANSFER.
This patch corrects the condition to kick the transfer without
giving back the requests when either request has remaining data
or when there are pending SGs. The && check was introduced during
spliting up the dwc3_gadget_ep_cleanup_completed_requests() function.
The original ID that was added for Comet Lake PCH was
actually for the -LP (low power) variant even though the
constant for it said CMLH. Changing that while at it.
In case we have to migrate a ballon page to a newpage of another zone, the
managed page count of both zones is wrong. Paired with memory offlining
(which will adjust the managed page count), we can trigger kernel crashes
and all kinds of different symptoms.
In another instance (older kernel), I was able to observe this
(negative page count :/):
[ 180.896971] Offlined Pages 32768
[ 182.667462] Offlined Pages 32768
[ 184.408117] Offlined Pages 32768
[ 186.026321] Offlined Pages 32768
[ 187.684861] Offlined Pages 32768
[ 189.227013] Offlined Pages 32768
[ 190.830303] Offlined Pages 32768
[ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009
In another instance (older kernel), I was no longer able to start any
process:
[root@vm ~]# [ 214.348068] Offlined Pages 32768
[ 215.973009] Offlined Pages 32768
cat /proc/meminfo
-bash: fork: Cannot allocate memory
[root@vm ~]# cat /proc/meminfo
-bash: fork: Cannot allocate memory
Fix it by properly adjusting the managed page count when migrating if
the zone changed. The managed page count of the zones now looks after
unplug of the DIMM (and after deflating the balloon) just like before
inflating the balloon (and plugging+onlining the DIMM).
We'll temporarily modify the totalram page count. If this ever becomes a
problem, we can fine tune by providing helpers that don't touch
the totalram pages (e.g., adjust_zone_managed_page_count()).
Please note that fixing up the managed page count is only necessary when
we adjusted the managed page count when inflating - only if we
don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the
managed page count is not touched when inflating/deflating.
Reported-by: Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Any write with either dd or flashcp to a device driven by the
spear_smi.c driver will pass through the spear_smi_cpy_toio()
function. This function will get called for chunks of up to 256 bytes.
If the amount of data is smaller, we may have a problem if the data
length is not 4-byte aligned. In this situation, the kernel panics
during the memcpy:
# dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6
spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256
spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256
spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256
spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233
Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8
[...]
PC is at memcpy+0xcc/0x330
The above error occurs because the implementation of memcpy_toio()
tries to optimize the number of I/O by writing 4 bytes at a time as
much as possible, until there are less than 4 bytes left and then
switches to word or byte writes.
Unfortunately, the specification states about the Write Burst mode:
"the next AHB Write request should point to the next
incremented address and should have the same size (byte,
half-word or word)"
This means ARM architecture implementation of memcpy_toio() cannot
reliably be used blindly here. Workaround this situation by update the
write path to stick to byte access when the burst length is not
multiple of 4.
Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem arises because our read() function grabs a lock of the
circular buffer, finds something of interest, then invokes copy_to_user()
straight from the buffer, which in turn takes mm->mmap_sem. In the same
time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem.
It attempts to take the fetch lock and deadlocks.
This patch does away with protecting of our page list with any
semaphores, and instead relies on the kernel not close the device
while mmap is active in a process.
In addition, we prohibit re-sizing of a buffer while mmap is active.
This way, when (now unlocked) fault is processed, it works with the
page that is intended to be mapped-in, and not some other random page.
Note that this may have an ABI impact, but hopefully no legitimate
program is this wrong.
Explicitly initialize URB structure urb_list field in usb_init_urb().
This field can be potentially accessed uninitialized and its
initialization is coherent with the usage of list_del_init() in
usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its
explicit initialization in usb_hcd_submit_urb() error path.
Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.
The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.
Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver") Cc: stable <stable@vger.kernel.org> # 2.6.16 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Temperature should be reported in milli-degrees, not degrees. Fix
scale and offset values to use the correct unit.
This is a fix for an issue that has been present for a long time.
The fixes tag reflects the point at which the code last changed in a
fashion that would make this fix patch no longer apply. Backports
will be necessary to fix those elements that predate that patch.
The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back
as percent when it should have been milli percent. This is via an
incorrect scale value being returned to userspace.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is defining debugfs entries by calling
`adis16480_debugfs_init()`. However, those entries are attached to the
iio_dev debugfs entry which won't exist if no debugfs_reg_access
callback is provided.
Fixes: 2f3abe6cbb6c ("iio:imu: Add support for the ADIS16480 and similar IMUs") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.
By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both
Broadcom/Cavium and a Renesas xHC controllers.
The quirk was inteded for handling false "success" complete event for
transfers that had data left untransferred.
These transfers should complete with "short packet" events instead.
In these two new cases the false "success" completion is reported
after a "short packet" if the TD consists of several TRBs.
xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet"
as well after the first short packet in a TD, but this issue seems so
common it doesn't make sense to add the quirk for all vendors.
Turn these events into short packets automatically instead.
This gets rid of the "The WARN Successful completion on short TX for
slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases.
Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in
xhci_suspend()") we also need to increase the HALT timeout to make it be
able to suspend again.
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and
the xHCI device is hot-removed as a result of unplugging a dock for
example, the driver leaks memory it allocates for xhci->usb3_rhub.psi
and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak:
Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.
Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a general protection fault when accessing the endpoint descriptors
which could be triggered by a malicious device due to missing sanity
checks on the number of endpoints.
On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging
cable to the ethernet port, the hub and roothub get runtime resumed and
runtime suspended immediately:
...
[ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[ 433.315204] usb usb4: usb auto-resume
[ 433.315226] hub 4-0:1.0: hub_resume
[ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343
[ 433.315264] usb usb4-port1: status 0343 change 0001
[ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2
[ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0
[ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[ 433.422307] usb usb4-port1: do warm reset
[ 433.422311] usb 4-1: device reset not allowed in state 8
[ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[ 433.422356] usb usb4-port1: do warm reset
[ 433.422358] usb 4-1: device reset not allowed in state 8
[ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2
[ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 433.422465] hub 4-0:1.0: hub_suspend
[ 433.422475] usb usb4: bus auto-suspend, wakeup 1
[ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling.
[ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0
[ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled
[ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled
[ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering
[ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt!
[ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2
[ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub
[ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling.
[ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling.
[ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[ 433.902919] usb usb4: usb wakeup-resume
[ 433.902942] usb usb4: usb auto-resume
[ 433.902966] hub 4-0:1.0: hub_resume
...
As Mathias pointed out, the hub enters Cold Attach Status state and
requires a warm reset. However usb_reset_device() bails out early when
the device is in suspended state, as its callers port_event() and
hub_event() don't always resume the device.
Since there's nothing wrong to reset a suspended device, allow
usb_reset_device() to do so to solve the issue.
v4l2_compat_ioctl32() is the function that calls into
v4l2_file_operations->compat_ioctl32(), so setting that back to the same
function leads to a trivial endless loop, followed by a kernel
stack overrun.
register_snap_client may return NULL, all the callers
check it, but only print a warning. This will result in
NULL pointer dereference in unregister_snap_client and other
places.
It has always been used like this since v2.6
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In qrtr_tun_write_iter the allocated kbuf should be release in case of
error or success return.
v2 Update: Thanks to David Miller for pointing out the release on success
path as well.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renesas sound device has many IPs and many situations.
If platform/board uses MIXer, situation will be more complex.
To avoid duplicate DVC kctrl registration when MIXer was used,
it had original flags.
But it was issue when sound card was re-binded, because
no one can't cleanup this flags then.
To solve this issue, commit 9c698e8481a15237a ("ASoC: rsnd: tidyup
registering method for rsnd_kctrl_new()") checks registered
card->controls, because if card was re-binded, these were cleanuped
automatically. This patch could solve re-binding issue.
But, it start to avoid MIX kctrl.
To solve these issues, we need below.
To avoid card re-binding issue: check registered card->controls
To avoid duplicate DVC registration: check registered rsnd_kctrl_cfg
To allow multiple MIX registration: check registered rsnd_kctrl_cfg
This patch do it.
Fixes: 9c698e8481a15237a ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") Reported-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-By: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xfs_prepare_shift() fails to check the error return from
xfs_flush_unmap_range(). If the latter fails, that could lead to an
insert/collapse range operation over a delalloc range, which is not
supported.
Add an error check and return appropriately. This is reproduced
rarely by generic/475.
Fixes: 7f9f71be84bc ("xfs: extent shifting doesn't fully invalidate page cache") Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 4721a601099, we tried to fix a problem wherein directio reads
into a splice pipe will bounce EFAULT/EAGAIN all the way out to
userspace by simulating a zero-byte short read. This happens because
some directio read implementations (xfs) will call
bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous
reads, but as soon as we run out of pipe buffers that _get_pages call
returns EFAULT, which the splice code translates to EAGAIN and bounces
out to userspace.
In that commit, the iomap code catches the EFAULT and simulates a
zero-byte read, but that causes assertion errors on regular splice reads
because xfs doesn't allow short directio reads. This causes infinite
splice() loops and assertion failures on generic/095 on overlayfs
because xfs only permit total success or total failure of a directio
operation. The underlying issue in the pipe splice code has now been
fixed by changing the pipe splice loop to avoid avoid reading more data
than there is space in the pipe.
Therefore, it's no longer necessary to simulate the short directio, so
remove the hack from iomap.
Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit 4721a601099, we tried to fix a problem wherein directio reads
into a splice pipe will bounce EFAULT/EAGAIN all the way out to
userspace by simulating a zero-byte short read. This happens because
some directio read implementations (xfs) will call
bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous
reads, but as soon as we run out of pipe buffers that _get_pages call
returns EFAULT, which the splice code translates to EAGAIN and bounces
out to userspace.
In that commit, the iomap code catches the EFAULT and simulates a
zero-byte read, but that causes assertion errors on regular splice reads
because xfs doesn't allow short directio reads.
The brokenness is compounded by splice_direct_to_actor immediately
bailing on do_splice_to returning <= 0 without ever calling ->actor
(which empties out the pipe), so if userspace calls back we'll EFAULT
again on the full pipe, and nothing ever gets copied.
Therefore, teach splice_direct_to_actor to clamp its requests to the
amount of free space in the pipe and remove the simulated short read
from the iomap directio code.
Fixes: 4721a601099 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'len' returned by grab_bb() includes an extra MAXINSN bytes to allow
for the last instruction, so the the final 'offs' will not be 'len'.
Fix the error condition logic accordingly.
Before:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep)
bmexec+2485: 00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED 00005641d5806bd0 movzxb (%r13,%rdx,1), %eax 00005641d5806bd6 add %rdi, %rax 00005641d5806bd9 movzxb -0x1(%rax), %edx 00005641d5806bdd cmp %rax, %r14 00005641d5806be0 jnb 0x5641d58069c0 # MISPRED
mismatch of LBR data and executable 00005641d58069c0 movzxb (%r13,%rdx,1), %edi
The ast2600 no longer uses bit 4 in the control register to indicate a
1MHz clock (It now controls whether this watchdog is reset by a SOC
reset). This means we do not want to set it. It also does not need to be
set for the ast2500, as it is read-only on that SoC.
The comment next to the clock rate selection wandered away from where it
was set, so put it back next to the register setting it's describing.
The first argument to WARN() is supposed to be a condition. The
original code will just print the mdname() instead of the full warning
message.
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is an alternative fix attemp for the issue reported in the commit caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions. Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.
Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The old loop wouldn't stop when reaching `start` if `start==NULL`, instead
continuing backwards to index -1 and crashing.
Luckily you need to be highly privileged to map things at NULL, so it's not
a big problem.
Fix it by adjusting the loop so that the loop variable is always in bounds.
This patch is deliberately minimal to simplify backporting, but IMO this
function could use a refactor. The jump labels in the second loop body are
horrible (the error gotos should be jumping to free_range instead), and
both loops would look nicer if they just iterated upwards through indices.
And the up_read()+mmput() shouldn't be duplicated like that.
binder_alloc_print_pages() iterates over
alloc->pages[0..alloc->buffer_size-1] under alloc->mutex.
binder_alloc_mmap_handler() writes alloc->pages and alloc->buffer_size
without holding that lock, and even writes them before the last bailout
point.
Unfortunately we can't take the alloc->mutex in the ->mmap() handler
because mmap_sem can be taken while alloc->mutex is held.
So instead, we have to locklessly check whether the binder_alloc has been
fully initialized with binder_alloc_get_vma(), like in
binder_alloc_new_buf_locked().
Commit d21b0be246bf ("vt: introduce unicode mode for /dev/vcs") guarded
against using devices containing attributes as this is not yet
implemented. It however failed to guard against writes to any devices
as this is also unimplemented.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Cc: <stable@vger.kernel.org> # v4.19+ Cc: Jiri Slaby <jslaby@suse.com> Fixes: d21b0be246bf ("vt: introduce unicode mode for /dev/vcs") Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.1911051030580.30289@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone
device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid
a use-after-free issue. However, cancel_delayed_work_sync could be called
insides the WQ causing deadlock.
When splicing using iomap_dio_rw() to a pipe, we may leak pipe pages
because bio_iov_iter_get_pages() records that the pipe will have full
extent worth of data however if file size is not block size aligned
iomap_dio_rw() returns less than what bio_iov_iter_get_pages() set up
and splice code gets confused leaking a pipe page with the file tail.
Handle the situation similarly to the old direct IO implementation and
revert iter to actually returned read amount which makes iter consistent
with value returned from iomap_dio_rw() and thus the splice code is
happy.
Fixes: ff6a9292e6f6 ("iomap: implement direct I/O") CC: stable@vger.kernel.org Reported-by: syzbot+991400e8eba7e00a26e1@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The permissions of the read-only or write-only sysfs files can be
changed (as root) and the user can then try to read a write-only file or
write to a read-only file which will lead to kernel crash here.
Protect against that by always validating the show/store callbacks.
In set_mac_address, driver check for interfaces with same bss_type
For first STA entry, this would return 3 interfaces since all priv's have
bss_type as 0 due to kzalloc. Thus mac address gets changed for STA
unexpected. This patch adds check for first STA and avoids mac address
change. This patch also adds mac_address change for p2p based on bss_num
type.
Signed-off-by: Sharvari Harisangam <sharvari@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until a few years ago, this driver was only used with CS GPIO. The
only exception is CS0 on AT91RM9200 which has to use internal CS. A
limitation of the internal CS is that they don't support CS High.
So by using the CS GPIO the CS high configuration was available except
for the particular case CS0 on RM9200.
When the support for the internal chip-select was added, the check of
the CS high support was not updated. Due to this the driver accepts
this configuration for all the SPI controller v2 (used by all SoCs
excepting the AT91RM9200) whereas the hardware doesn't support it for
infernal CS.
This patch fixes the test to match the hardware capabilities.
Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-3-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The elliptic curve arithmetic library used by the EC-DH KPP implementation
assumes big endian byte order, and unconditionally reverses the byte
and word order of multi-limb quantities. On big endian systems, the byte
reordering is not necessary, while the word ordering needs to be retained.
So replace the __swab64() invocation with a call to be64_to_cpu() which
should do the right thing for both little and big endian builds.
The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.
Cc: <stable@vger.kernel.org> Reported-by: Sahaj Sarup <sahajsarup@gmail.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when libkcapi test is executed using HW accelerator, cipher operation
return -74.Since af_alg_async_cb->ki_complete treat err as unsigned int,
libkcapi receive 429467222 even though it expect -ve value.
Hence its required to cast resultlen to int so that proper
error is returned to libkcapi.
commit 394a9e044702 ("crypto: cfb - add missing 'chunksize' property")
adds a test vector where the input length is smaller than the IV length
(the second test vector). This revealed a NULL pointer dereference in
the atmel-aes driver, that is caused by passing an incorrect offset in
scatterwalk_map_and_copy() when atmel_aes_complete() is called.
Do not save the IV in req->info of ablkcipher_request (or equivalently
req->iv of skcipher_request) when req->nbytes < ivsize, because the IV
will not be further used.
While touching the code, modify the type of ivsize from int to
unsigned int, to comply with the return type of
crypto_ablkcipher_ivsize().
Fixes: 91308019ecb4 ("crypto: atmel-aes - properly set IV after {en,de}crypt") Cc: <stable@vger.kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a crash that can happen during probe
when the available dma memory is not enough (this can
happen if the crypto4xx is built as a module).
The descriptor window mapping would end up being free'd
twice, once in crypto4xx_build_pdr() and the second time
in crypto4xx_destroy_sdr().
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug
where nVMX derefences ->memslots without holding ->srcu or ->slots_lock.
The other half of nested migration, ->get_nested_state(), does not need
to acquire ->srcu as it is a purely a dump of internal KVM (and CPU)
state to userspace.
Detected as an RCU lockdep splat that is 100% reproducible by running
KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the
failing function, kvm_is_visible_gfn(), is only checking the validity of
a gfn, it's not actually accessing guest memory (which is more or less
unsupported during vmx_set_nested_state() due to incorrect MMU state),
i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any
case, setting nested state isn't a fast path so there's no reason to go
out of our way to avoid taking ->srcu.
KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented
to the guests. It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR &&
!RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not
hidden (it actually was), yet the value says that TSX is not vulnerable
to microarchitectural data sampling. Fix both.
Cc: stable@vger.kernel.org Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"Shared MSRs" are guest MSRs that are written to the host MSRs but
keep their value until the next return to userspace. They support
a mask, so that some bits keep the host value, but this mask is
only used to skip an unnecessary MSR write and the value written
to the MSR is always the guest MSR.
Fix this and, while at it, do not update smsr->values[slot].curr if
for whatever reason the wrmsr fails. This should only happen due to
reserved bits, so the value written to smsr->values[slot].curr
will not match when the user-return notifier and the host value will
always be restored. However, it is untidy and in rare cases this
can actually avoid spurious WRMSRs on return to userspace.
Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Tested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible that two LPIs locate in the same "byte_offset" but target
two different vcpus, where their pending status are indicated by two
different pending tables. In such a scenario, using last_byte_offset
optimization will lead KVM relying on the wrong pending table entry.
Let us use last_ptr instead, which can be treated as a byte index into
a pending table and also, can be vcpu specific.
Commit ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space
mapping for soc node") changed the address and size cells in root node from
2 to 1, but /memory nodes for the affected boards were not updated. This
went unnoticed on Exynos5433-based TM2(e) boards, because they use u-boot,
which updates /memory node to the correct values. On the other hand, the
mentioned commit broke boot on Exynos7-based Espresso board, which
bootloader doesn't touch /memory node at all.
This patch reverts commit ef72171b3621 ("arm64: dts: exynos: Remove
unneeded address space mapping for soc node"), so Exynos5433 and Exynos7
SoCs again matches other ARM64 platforms with 64bit mappings in root
node.
Reported-by: Alim Akhtar <alim.akhtar@samsung.com> Fixes: ef72171b3621 ("arm64: dts: exynos: Remove unneeded address space mapping for soc node") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> # 5.3.x: 72ddcf6aa224 arm64: dts: exynos: Move GPU under /soc node for Exynos5433 Cc: <stable@vger.kernel.org> # 5.3.x: ede87c3a2bdb arm64: dts: exynos: Move GPU under /soc node for Exynos7 Cc: <stable@vger.kernel.org> # 4.18.x Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "used" variables here come from the user in the ioctl and it can be
negative. It could result in an out of bounds write.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.
Note that the return value from release() is ignored.
Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When number of free space in the journal is very low, the arithmetic in
jbd2_log_space_left() could underflow resulting in very high number of
free blocks and thus triggering assertion failure in transaction commit
code complaining there's not enough space in the journal:
J_ASSERT(journal->j_free > 1);
Properly check for the low number of free blocks.
CC: stable@vger.kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances. The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.
Fix it by remembering the last ino and comparing against that.
Slcan_open doesn't clean-up device which registration failed from the
slcan_devs device list. On next open this list is iterated and freed
device is accessed. Fix this by calling slc_free_netdev in error path.
Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was
identified in slip_open by syzboz. Same bug is in slcan.c. Here is the
trace from the Syzbot slip report:
Do not try to handle keycodes that are too big, otherwise we risk doing
out-of-bounds writes:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
In this case we were dealing with a fuzzed HID device that declared over
12K buttons, and while HID layer should not be reporting to us such big
keycodes, we should also be defensive and reject invalid data ourselves as
well.
Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.
However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.
The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.
Cc: Stable <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:
Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.
Cc: Stable <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the current implementation, phydev cannot be removed:
$ ip link add dummy type dummy
$ ip link add xfrm1 type xfrm dev dummy if_id 1
$ ip l d dummy
kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1
Manage it like in ip tunnels, ie just keep the ifindex. Not that the side
effect, is that the phydev is now optional.
dev_net(dev) is the netns of the device and xi->net is the link netns,
where the device has been linked.
changelink() must operate in the link netns to avoid a corruption of
the xfrm lists.
Note that xi->net and dev_net(xi->physdev) are always the same.
Before the patch, the xfrmi lists may be corrupted and can later trigger a
kernel panic.
The new parameters must not be stored in the netdev_priv() before
validation, it may corrupt the interface. Note also that if data is NULL,
only a memset() is done.
$ ip link add xfrm1 type xfrm dev lo if_id 1
$ ip link add xfrm2 type xfrm dev lo if_id 2
$ ip link set xfrm1 type xfrm dev lo if_id 2
RTNETLINK answers: File exists
$ ip -d link list dev xfrm1
5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
The following commands produce a backtrace and return an error but the xfrm
interface is created (in the wrong netns):
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 0
$ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23
RTNETLINK answers: Invalid argument
$ ip -n bar link ls xfrmi0
2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00
In fact, each time a xfrm interface was created, a netdev was allocated
by __rtnl_newlink()/rtnl_create_link() and then another one by
xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's
why the previous commands produce a backtrace: dev_change_net_namespace()
was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the
first one).
The AMD FCH USB XHCI Controller advertises support for generating PME#
while in D0. When in D0, it does signal PME# for USB 3.0 connect events,
but not for USB 2.0 or USB 1.1 connect events, which means the controller
doesn't wake correctly for those events.
00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
Subsystem: Dell FCH USB XHCI Controller [1028:087e]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not
assert PME# from D0 so we don't rely on it.
The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.
This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.
But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.
In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:
This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).
This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.
To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.
So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.
The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.
This change fixes the ldt_gdt selftest in my setup.
[ mingo: Fixed up the changelog to explain the logic and modified the
copying to only happen up until VMALLOC_END. ]
Navid Emamdoost [Thu, 21 Nov 2019 20:01:11 +0000 (14:01 -0600)]
Input: Fix memory leak in psxpad_spi_probe
In the implementation of psxpad_spi_probe() the allocated memory for
pdev is leaked if psxpad_spi_init_ff() or input_register_polled_device()
fail. The solution is using device managed allocation, like the one used
for pad. Perform the allocation using
devm_input_allocate_polled_device().
Fixes: 8be193c7b1f4 ("Input: add support for PlayStation 1/2 joypads connected via SPI") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of issues are fixed relating to sysfs input validation:-
1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file") Cc: stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.
This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.
The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.
I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.
It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.
With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.
The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.
syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.
Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.
Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.
Fixes: 60083f9e94b2 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
