Copy-paste error where LL cache misses are reported as l1i.
Fixes: 0a57b910807ad163 ("perf stat: Use counts rather than saved_value") Suggested-by: Guillaume Endignoux <guillaumee@google.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231211181242.1721059-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Song Liu <song@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ming Wang <wangming01@loongson.cn> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Free the pdbs inside aa_free_pdb(). While at it, rename the variable
representing an aa_policydb object to make the function more unified with
aa_pdb_free_kref() and aa_alloc_pdb().
Found by Linux Verification Center (linuxtesting.org).
Fixes: 98b824ff8984 ("apparmor: refcount the pdb") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
in nvmet_tcp_handle_h2c_data_pdu(), if the host sends a data_offset
different from rbytes_done, the driver ends up calling nvmet_req_complete()
passing a status error.
The problem is that at this point cmd->req is not yet initialized,
the kernel will crash after dereferencing a NULL pointer.
Fix the bug by replacing the call to nvmet_req_complete() with
nvmet_tcp_fatal_error().
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reviewed-by: Keith Busch <kbsuch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the host sends an H2CData command with an invalid DATAL,
the kernel may crash in nvmet_tcp_build_pdu_iovec().
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp]
Call trace:
process_one_work+0x174/0x3c8
worker_thread+0x2d0/0x3e8
kthread+0x104/0x110
Fix the bug by raising a fatal error if DATAL isn't coherent
with the packet size.
Also, the PDU length should never exceed the MAXH2CDATA parameter which
has been communicated to the host in nvmet_tcp_handle_icreq().
apparmor_task_kill was not putting the task_cred reference tc, or the
cred_label reference tc when dealing with a passed in cred, fix this
by using a single fn exit.
Fixes: 90c436a64a6e ("apparmor: pass cred through to audit info.") Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the bootloader/firmware doesn't setup the framebuffers, their
address and size are 0 in "iommu-addresses" property. If IOVA region is
reserved with 0 length, then it ends up corrupting the IOVA rbtree with
an entry which has pfn_hi < pfn_lo.
If we intend to use display driver in kernel without framebuffer then
it's causing the display IOMMU mappings to fail as entire valid IOVA
space is reserved when address and length are passed as 0.
An ideal solution would be firmware removing the "iommu-addresses"
property and corresponding "memory-region" if display is not present.
But the kernel should be able to handle this by checking for size of
IOVA region and skipping the IOVA reservation if size is 0. Also, add
a warning if firmware is requesting 0-length IOVA region reservation.
commit 588b9e85609b ("usb: gadget: uvc: add v4l2 enumeration api calls")
has rendered the precomposed (aka legacy) webcam gadget unloadable.
uvc_alloc() since then has depended on certain config groups being
available in configfs tree related to the UVC function. However, legacy
gadgets do not create anything in configfs, so uvc_alloc() must fail
with -ENOENT no matter what.
This patch mimics the required configfs hierarchy to satisfy the code which
inspects formats and frames found in uvcg_streaming_header.
This has been tested with guvcview on the host side, using vivid as a
source of video stream on the device side and using the userspace program
found at https://gitlab.freedesktop.org/camera/uvc-gadget.git.
Before writing the read or write command to the SPMI arbiter through the
PMIF interface, the current status of the channel is checked to ensure
it is idle. However, since the status only changes from idle when the
command is written, it is possible for two concurrent calls to determine
that the channel is idle and simultaneously send their commands. At this
point the PMIF interface hangs, with the status register no longer being
updated, and thus causing all subsequent operations to time out.
This was observed on the mt8195-cherry-tomato-r2 machine, particularly
after commit 46600ab142f8 ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for
drivers between 5.10 and 5.15") was applied, since then the two MT6315
devices present on the SPMI bus would probe assynchronously and
sometimes (during probe or at a later point) read the bus
simultaneously, breaking the PMIF interface and consequently slowing
down the whole system.
To fix the issue at its root cause, introduce locking around the channel
status check and the command write, so that both become an atomic
operation, preventing race conditions between two (or more) SPMI bus
read/write operations. A spinlock is used since this is a fast bus, as
indicated by the usage of the atomic variant of readl_poll, and
'.fast_io = true' being used in the mt6315 driver, so spinlocks are
already used for the regmap access.
Fixes: b45b3ccef8c0 ("spmi: mediatek: Add support for MT6873/8192") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20230724154739.493724-1-nfraprado@collabora.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231206231733.4031901-2-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
CDX was fixed once, but commit ("cdx: Remove cdx controller list from cdx
bus system") added another occurrence.
Fixes: 54b406e10f03 ("cdx: Remove cdx controller list from cdx bus system") Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Nikhil Agarwal <Nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20231207163128.2707993-2-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In ACM support for sending breaks to devices is optional.
If a device says that it doenot support sending breaks,
the host must respect that.
Given the number of optional features providing tty operations
for each combination is not practical and errors need to be
returned dynamically if unsupported features are requested.
In case a device does not support break, we want the tty layer
to treat that like it treats drivers that statically cannot
support sending a break. It ignores the inability and does nothing.
This patch uses EOPNOTSUPP to indicate that.
In the error path of pci_epf_mhi_edma_write() function, the DMA data
direction passed (DMA_FROM_DEVICE) doesn't match the actual direction used
for the data transfer. Fix it by passing the correct one (DMA_TO_DEVICE).
In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.
No functional change.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()") Signed-off-by: Sasha Levin <sashal@kernel.org>
It is possible that the host controller driver would use DMA framework to
write the event ring element. So avoid allocating event ring element on the
stack as DMA cannot work on vmalloc memory.
Cc: stable@vger.kernel.org Fixes: 961aeb689224 ("bus: mhi: ep: Add support for sending events to the host") Link: https://lore.kernel.org/r/20230901073502.69385-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The base address of a DSO mapping should start at the start of the file.
Usually DSOs are mapped from the pgoff 0 so it doesn't matter when it
uses the start of the map address.
But generated DSOs for JIT codes doesn't start from the 0 so it should
subtract the offset to calculate the .eh_frame table offsets correctly.
Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Pablo Galindo <pablogsal@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231212070547.612536-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Usually DSOs are mapped from the beginning of the file, so the base
address of the DSO can be calculated by map->start - map->pgoff.
However, JIT DSOs which are generated by `perf inject -j`, are mapped
only the code segment. This makes unwind-libdw code confusing and
rejects processing unwinds in the JIT DSOs. It should use the map
start address as base for them to fix the confusion.
Fixes: 1fe627da30331024 ("perf unwind: Take pgoff into account when reporting elf to libdwfl") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Pablo Galindo <pablogsal@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231212070547.612536-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ASan complains a memory leakage in hisi_ptt_process_auxtrace_event()
that the data buffer is not freed. Since currently we only support the
raw dump trace mode, the data buffer is used only within this function.
So fix this by freeing the data buffer before going out.
Fixes: 5e91e57e68090c0e ("perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Namhyung Kim <Namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Link: https://lore.kernel.org/r/20231207081635.8427-3-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When dump the raw trace by `perf report -D` ASan reports a memory
leakage in perf_event__fprintf_event_update().
It shows that we allocated a temporary cpumap for dumping the CPUs but
doesn't release it and it's not used elsewhere. Fix this by free the
cpumap after the dumping.
Fixes: c853f9394b7bc189 ("perf tools: Add perf_event__fprintf_event_update function") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Junhao He <hejunhao3@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20231207081635.8427-2-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.
Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.
While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.
Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When building whole selftests on arm64, rsync gives an erorr about sgx:
rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5]
The root casue is sgx only used on X86_64, and shall be skipped on other
platforms.
Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check,
then the build result will be "Skipping non-existent dir: sgx".
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the
compiler the assembly code accesses to the secinfo struct. This ensures
the compiler treats the asm block as a memory barrier and the write to
secinfo will be visible to ENCLU.
Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure sym_tab and sym_names are zero-initialized and add an early-out
condition in the unlikely (erroneous) case that the enclave ELF file would
not contain a symbol table.
This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2.
Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure ctx is zero-initialized, such that the encl_measure function will
not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an
early error during key generation.
Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
When using the serial port as RS485 port, the tx statemachine is used to
control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
TTY port is closed in the middle of a transmission (for instance during
userland application crash), imx_uart_shutdown disables the interface
and disables the Transmission Complete interrupt. afer that,
imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
by the TC interrupt. This interrupt is disabled and therefore the tx
statemachine never transitions out of SEND. The statemachine is in
deadlock now, and the TX_EN remains low, making the interface useless.
imx_uart_stop_tx now checks for incomplete transmission AND whether TC
interrupts are enabled before bailing to be retriggered. This makes sure
the state machine handling is reached, and is properly set to
WAIT_AFTER_SEND.
fwnode_get_property_reference_args() may not be called with args argument
NULL on ACPI, OF already supports this. Add the missing NULL checks and
document this.
The purpose is to be able to count the references.
Fixes: 977d5ad39f3e ("ACPI: Convert ACPI reference args to generic fwnode reference args") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code registers the node as available in the node array
before initializing the accessor list. This makes it so that
anything which might access the accessor list as a result of
allocations will cause an undefined memory access.
In one example, an extension to access hmat data during interleave
caused this undefined access as a result of a bulk allocation
that occurs during node initialization but before the accessor
list is initialized.
Initialize the accessor list before making the node generally
available to the global system.
Fixes: 08d9dbe72b1f ("node: Link memory nodes to their compute nodes") Signed-off-by: Gregory Price <gregory.price@memverge.com> Link: https://lore.kernel.org/r/20231030044239.971756-1-gregory.price@memverge.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Metrics were added by a callback but commit a4b8cfcabb1d90ec ("perf
stat: Delay metric parsing") postponed this to allow optimizations based
on the CPU configuration.
In doing so it stopped errors in metric parsing from causing 'perf stat'
termination.
This change adds the termination for bad metric names back in.
Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Closes: https://lore.kernel.org/lkml/ZXByT1K6enTh2EHT@kernel.org/ Link: https://lore.kernel.org/r/20231206183533.972028-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The below error can be triggered on a hybrid machine.
$ perf mem record -t load sleep 1
event syntax error: 'breakpoint/mem-loads,ldlat=30/P'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'breakpoint'
In the perf_mem_events__record_args(), the current perf never checks the
availability of a mem event on a given PMU. All the PMUs will be added
to the perf mem event list. Perf errors out for the unsupported PMU.
Extend perf_mem_event__supported() and take a PMU into account. Check
the mem event for each PMU before adding it to the perf mem event list.
Optimize the perf_mem_events__init() a little bit. The function is to
check whether the mem events are supported in the system. It doesn't
need to scan all PMUs. Just return with the first supported PMU is good
enough.
Fixes: 5752c20f3787c9bc ("perf mem: Scan all PMUs instead of just core ones") Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20231128203940.3964287-1-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Running "perf list" on powerpc fails with segfault as below:
$ ./perf list
Segmentation fault (core dumped)
$
This happens because of duplicate events in the JSON list. The powerpc
JSON event list contains some event with same event name, but different
event code. They are:
- PM_INST_FROM_L3MISS (Present in datasource and frontend)
- PM_MRK_DATA_FROM_L2MISS (Present in datasource and marked)
- PM_MRK_INST_FROM_L3MISS (Present in datasource and marked)
- PM_MRK_DATA_FROM_L3MISS (Present in datasource and marked)
pmu_events_table__num_events() uses the value from table_pmu->num_entries
which includes duplicate events as well. This causes issue during "perf
list" and results in a segmentation fault.
Since both event codes are valid, append _DSRC to the Data Source events
(datasource.json), so that they would have a unique name.
Also add PM_DATA_FROM_L2MISS_DSRC and PM_DATA_FROM_L3MISS_DSRC events.
With the fix, 'perf list' works as expected.
Fixes: fc143580753348c6 ("perf vendor events power10: Update JSON/events") Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231123160110.94090-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The documentation wrongly called the event as BPU_FLUSH_MEM_FAULT and now
has been fixed. Correct the name in the perf tool as well.
Fixes: a9650b7f6fc09d16 ("perf vendor events arm64: Add AmpereOne core PMU events") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20231201021550.1109196-3-ilkka@os.amperecomputing.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The incorrect check is being done for comparing the
iova/length being requested to sync. This can cause
the dirty sync operation to fail. Fix this by making
sure the iova offset added to the requested sync
length doesn't exceed the region_size.
Also, the region_start is assumed to always be at 0.
This can cause dirty tracking to fail because the
device/driver bitmap offset always starts at 0,
however, the region_start/iova may not. Fix this by
determining the iova offset from region_start to
determine the bitmap offset.
Fixes: f232836a9152 ("vfio/pds: Add support for dirty page tracking") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231117001207.2793-2-brett.creeley@amd.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'vg' register for arm64 shows up in --user_regs as available when
masking the variable AT_HWCAP with 1 << 22 returns '1' as done in
perf_regs.c.
However, in subtests for support of SVE, the check for the 'vg' register
is done by masking the variable AT_HWCAP with the value 0x200000 which
is equals to 1 << 21 instead of 1 << 22.
This results in inconsistencies on certain systems where the test
expects that the 'vg' register is not operational when it is, and
vice-versa.
During the testing on a machine that the test expected not to have the
'vg' register available, 'perf record' with the option --user-regs
showed records for the 'vg' register together with all of the others,
which means that the mask for the subtest of perf_event_attr is off by
one.
Change the value of the mask from 0x200000 to 0x400000 to correct it.
Fixes: 9440ebdc333dd12e ("perf test arm64: Add attr tests for new VG register") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/20231201194617.13012-1-vmolnaro@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
vchiq_add_connected_callback() logs using vchiq_log_error() macro,
but passes NULL instead of a struct device pointer. Fix it.
vchiq_add_connected_callback() is not used anywhere in the vc04_services
as of now. It will be used when we add new drivers(VC shared memory and
bcm2835-isp), hence it kept as it is for now.
The handle_to_service() helper can return NULL, so `service` pointer
can indeed be set to NULL. So, do not log through service pointer
(which can cause NULL-deference), instead, use the vchiq_instance
function argument to get access to the struct device.
Fixes: f67af5940d6d ("staging: vc04: Convert(and rename) vchiq_log_info() to use dynamic debug") Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Link: https://lore.kernel.org/r/20231128201845.489237-1-umang.jain@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not increase the node count unless a node has been successfully read,
because it can lead to a segfault if an error occurs.
For example, if perf exceeds the open file limit in memory_node__read(),
which, on a test system, could be made to happen by setting the file limit
to exactly 32:
Before:
$ ulimit -n 32
$ perf mem record --all-user -- sleep 1
[ perf record: Woken up 1 times to write data ]
failed: can't open memory sysfs data
perf: Segmentation fault
Obtained 14 stack frames.
perf(sighandler_dump_stack+0x48) [0x55f4b1f59558]
/lib/x86_64-linux-gnu/libc.so.6(+0x42520) [0x7f4ba1c42520]
/lib/x86_64-linux-gnu/libc.so.6(free+0x1e) [0x7f4ba1ca53fe]
perf(+0x178ff4) [0x55f4b1f48ff4]
perf(+0x179a70) [0x55f4b1f49a70]
perf(+0x17ef5d) [0x55f4b1f4ef5d]
perf(+0x85c0b) [0x55f4b1e55c0b]
perf(cmd_record+0xe1d) [0x55f4b1e5920d]
perf(cmd_mem+0xc96) [0x55f4b1e80e56]
perf(+0x130460) [0x55f4b1f00460]
perf(main+0x689) [0x55f4b1e427d9]
/lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f4ba1c29d90]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f4ba1c29e40]
perf(_start+0x25) [0x55f4b1e42a25]
Segmentation fault (core dumped)
$
After:
$ ulimit -n 32
$ perf mem record --all-user -- sleep 1
[ perf record: Woken up 1 times to write data ]
failed: can't open memory sysfs data
[ perf record: Captured and wrote 0.005 MB perf.data (11 samples) ]
$
Fixes: f8e502b9d1b3b197 ("perf header: Ensure bitmaps are freed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231123075848.9652-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current use of atomics can lead to test failures, as tests (such as
tests/shell/record.sh) search for samples with "test_loop" as the
top-most stack frame, but find frames related to the atomic operation
(e.g. __aarch64_ldadd4_relax).
This change simply removes the "count" variable, as it is not necessary.
Fixes: 1962ab6f6e0b39e4 ("perf test workload thloop: Make count increments atomic") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Acked-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231102162225.50028-1-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if the device is marked as DMA coherent in the DT and if so,
map its reserved memory as cacheable in the IOMMU.
This fixes the recently added IOMMU reserved memory support which
uses IOMMU_RESV_DIRECT without properly building the PROT for the
mapping.
Returning an error code from .remove() makes the driver core emit the
little helpful error message:
remove callback returned a non-zero value. This will be ignored.
and then remove the device anyhow. So all resources that were not freed
are leaked in this case. Skipping serial8250_unregister_port() has the
potential to keep enough of the UART around to trigger a use-after-free.
So replace the error return (and with it the little helpful error
message) by a more useful error message and continue to cleanup.
Coverity complains that pointer in the pci_dev_for_each_resource() may be
wrong, i.e., might be used for the out-of-bounds read.
There is no actual issue right now because we have another check afterwards
and the out-of-bounds read is not being performed. In any case it's better
code with this fixed, hence the proposed change.
As Jonas pointed out "It probably makes the code slightly less performant
as res will now be checked for being not NULL (which will always be true),
but I doubt it will be significant (or in any hot paths)."
RRT_ALRT register holds remaining battery time in minutes therefore it
needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs
expressed in seconds
Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver") Signed-off-by: Jan Palus <jpalus@fastmail.com> Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During the refactoring, a bug was introduced in the rarly used
XIP_FIXUP_FLASH_OFFSET macro.
Fixes: bee7fbc38579 ("RISC-V CPU Idle Support") Fixes: e7681beba992 ("RISC-V: Split out the XIP fixups into their own file") Signed-off-by: Frederik Haxel <haxel@fzi.de> Link: https://lore.kernel.org/r/20231212130116.848530-3-haxel@fzi.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When resetting the linear mapping permissions, we must make sure that we
clear the X bit so that do not end up with WX mappings (since we set
PAGE_KERNEL).
After unloading a module, we must reset the linear mapping permissions,
see the example below:
Before unloading a module:
0xffffaf809d65d000-0xffffaf809d6dc000 0x000000011d65d000 508K PTE . .. .. D A G . . W R V
0xffffaf809d6dc000-0xffffaf809d6dd000 0x000000011d6dc000 4K PTE . .. .. D A G . . . R V
0xffffaf809d6dd000-0xffffaf809d6e1000 0x000000011d6dd000 16K PTE . .. .. D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X . R V
After unloading a module:
0xffffaf809d65d000-0xffffaf809d6e1000 0x000000011d65d000 528K PTE . .. .. D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X W R V
The last mapping is not reset and we end up with WX mappings in the linear
mapping.
So add VM_FLUSH_RESET_PERMS to our module_alloc() definition.
Fixes: 0cff8bff7af8 ("riscv: avoid the PIC offset of static percpu data in module beyond 2G limits") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20231213134027.155327-2-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
lm_alias() can only be used on kernel mappings since it explicitly uses
__pa_symbol(), so simply fix this by checking where the address belongs
to before.
Fixes: 311cd2f6e253 ("riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings") Reported-by: syzbot+afb726d49f84c8d95ee1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-riscv/000000000000620dd0060c02c5e1@google.com/ Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231212195400.128457-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
max_low_pfn variable is incorrectly adjusted if the kernel is built with
high memory support and the later is detected in a running system, so the
memory which actually can be directly mapped is getting into the highmem
zone. See the ZONE_NORMAL range on my MIPS32r5 system:
> Zone ranges:
> DMA [mem 0x0000000000000000-0x0000000000ffffff]
> Normal [mem 0x0000000001000000-0x0000000007ffffff]
> HighMem [mem 0x0000000008000000-0x000000020fffffff]
while the zones are supposed to look as follows:
> Zone ranges:
> DMA [mem 0x0000000000000000-0x0000000000ffffff]
> Normal [mem 0x0000000001000000-0x000000001fffffff]
> HighMem [mem 0x0000000020000000-0x000000020fffffff]
Even though the physical memory within the range [0x08000000;0x20000000]
belongs to MMIO on our system, we don't really want it to be considered as
high memory since on MIPS32 that range still can be directly mapped.
Note there might be other problems caused by the max_low_pfn variable
misconfiguration. For instance high_memory variable is initialize with
virtual address corresponding to the max_low_pfn PFN, and by design it
must define the upper bound on direct map memory, then end of the normal
zone. That in its turn potentially may cause problems in accessing the
memory by means of the /dev/mem and /dev/kmem devices.
Let's fix the discovered misconfiguration then. It turns out the commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") didn't introduce the
max_low_pfn adjustment quite correct. If the kernel is built with high
memory support and the system is equipped with high memory, the
max_low_pfn variable will need to be initialized with PFN of the most
upper directly reachable memory address so the zone normal would be
correctly setup. On MIPS that PFN corresponds to PFN_DOWN(HIGHMEM_START).
If the system is built with no high memory support and one is detected in
the running system, we'll just need to adjust the max_pfn variable to
discard the found high memory from the system and leave the max_low_pfn as
is, since the later will be less than PFN_DOWN(HIGHMEM_START) anyway by
design of the for_each_memblock() loop performed a bit early in the
bootmem_init() method.
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
dmi_early_remap() has been defined as ioremap_cache() which on MIPS32 gets
to be converted to the VM-based mapping. DMI early remapping is performed
at the setup_arch() stage with no VM available. So calling the
dmi_early_remap() for MIPS32 causes the system to crash at the early boot
time. Fix that by converting dmi_early_remap() to the uncached remapping
which is always available on both 32 and 64-bits MIPS systems.
Note this change shall not cause any regressions on the current DMI
support implementation because on the early boot-up stage neither MIPS32
nor MIPS64 has the cacheable ioremapping support anyway.
Fixes: be8fa1cb444c ("MIPS: Add support for Desktop Management Interface (DMI)") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is claimed that srcu_read_lock_nmisafe() NMI-safe. However it
triggers a lockdep if used from NMI because lockdep expects a deadlock
since nothing disables NMIs while the lock is acquired.
This is because commit f0f44752f5f61 ("rcu: Annotate SRCU's update-side
lockdep dependencies") annotates synchronize_srcu() as a write lock
usage. This helps to detect a deadlocks such as
srcu_read_lock();
synchronize_srcu();
srcu_read_unlock();
The side effect is that the lock srcu_struct now has a USED usage in normal
contexts, so it conflicts with a USED_READ usage in NMI. But this shouldn't
cause a real deadlock because the write lock usage from synchronize_srcu()
is a fake one and only used for read/write deadlock detection.
Use a try-lock annotation for srcu_read_lock_nmisafe() to avoid lockdep
complains if used from NMI.
Fixes: f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies") Link: https://lore.kernel.org/r/20230927160231.XRCDDSK4@linutronix.de Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.
Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com> Link: https://lore.kernel.org/r/20231211111441.3910083-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: 325bec7157b3 ("mfd: tps6594: Add driver for TI TPS6594 PMIC") Suggested-by: Lee Jones <lee@kernel.org> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20231208033320.49345-1-chentao@kylinos.cn Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If write only DIM value to the page 4, LED brightness will not be
updated, as both DIM and FADE need to be written to the page 4.
Therefore, write DIM to the page 1.
Fixes: 36a87f371b7a ("leds: Add AW20xx driver") Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231125200519.1750-2-ddrokosov@salutedevices.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The AW2013 driver uses devm_regmap_init_i2c, so REGMAP_I2C needs to
be selected.
Otherwise build process may fail with:
ld: drivers/leds/leds-aw2013.o: in function `aw2013_probe':
leds-aw2013.c:345: undefined reference to `__devm_regmap_init_i2c'
Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdabacf ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdabacf ("rcu: Add RCU CPU stall notifier") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: e15d7f2b81d2 ("mfd: syscon: Use a unique name with regmap_config") Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231204092443.2462115-1-chentao@kylinos.cn Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Two ports are missing from the port list, and the wrong port is set
to 4 channels. Also the attempt to list them by function is rather
misguided, there is nothing in the hardware that fixes a particular
port to one function. Factor out the port properties to an actual
struct, fixing the missing ports and correcting the port set to 4
channels.
Since commit 210f418f8ace ("mfd: rk8xx: Add rk806 support"), devices are
registered with "0" as id, causing devices to not have an automatic device id
and prevents having multiple RK8xx PMICs on the same system.
Properly pass PLATFORM_DEVID_AUTO to devm_mfd_add_devices() and since
it will ignore the cells .id with this special value, also cleanup
by removing all now ignored cells .id values.
Now we have the same behaviour as before rk806 introduction and rk806
retains the intended behavior.
This fixes a regression while booting the Odroid Go Ultra on v6.6.1:
sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
Hardware name: Hardkernel ODROID-GO-Ultra (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x9c/0x11c
show_stack+0x18/0x24
dump_stack_lvl+0x78/0xc4
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_do_create_link_sd+0xf0/0xf8
sysfs_create_link+0x20/0x40
bus_add_device+0x114/0x160
device_add+0x3f0/0x7cc
platform_device_add+0x180/0x270
mfd_add_device+0x390/0x4a8
devm_mfd_add_devices+0xb0/0x150
rk8xx_probe+0x26c/0x410
rk8xx_i2c_probe+0x64/0x98
i2c_device_probe+0x104/0x2e8
really_probe+0x184/0x3c8
__driver_probe_device+0x7c/0x16c
driver_probe_device+0x3c/0x10c
__device_attach_driver+0xbc/0x158
bus_for_each_drv+0x80/0xdc
__device_attach+0x9c/0x1ac
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0xa0/0xf4
process_one_work+0x1bc/0x378
worker_thread+0x1dc/0x3d4
kthread+0x104/0x118
ret_from_fork+0x10/0x20
rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
rk8xx-i2c: probe of 0-001c failed with error -17
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There appear to be a few different ways that Wacom devices can deal with
confidence:
1. If the device looses confidence in a touch, it will first clear
the tipswitch flag in one report, and then clear the confidence
flag in a second report. This behavior is used by e.g. DTH-2452.
2. If the device looses confidence in a touch, it will clear both
the tipswitch and confidence flags within the same report. This
behavior is used by some AES devices.
3. If the device looses confidence in a touch, it will clear *only*
the confidence bit. The tipswitch bit will remain set so long as
the touch is tracked. This behavior may be used in future devices.
The driver does not currently handle situation 3 properly. Touches that
loose confidence will remain "in prox" and essentially frozen in place
until the tipswitch bit is finally cleared. Not only does this result
in userspace seeing a stuck touch, but it also prevents pen arbitration
from working properly (the pen won't send events until all touches are
up, but we don't currently process events from non-confident touches).
This commit centralizes the checking of the confidence bit in the
wacom_wac_finger_slot() function and has 'prox' depend on it. In the
case where situation 3 is encountered, the treat the touch as though
it was removed, allowing both userspace and the pen arbitration to
act normally.
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the commit 666cf30a589a ("HID: sensor-hub: Allow multi-function
sensor devices") hub devices are claimed by hidraw driver in hid_connect().
This causes stoppping of processing HID reports by hid core due to
optimization.
In such case, the hid-sensor-custom driver cannot match a known custom
sensor in hid_sensor_custom_get_known() because it try to check custom
properties which weren't filled from the report because hid core didn't
parsed it.
As result, custom sensors like hinge angle sensor and LISS sensors
don't work.
Mark the sensor hub devices claimed by some driver to avoid hidraw-related
optimizations.
Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.
Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.
Stop all counters and release all perf events before refreshing the vPMU,
i.e. before reconfiguring the vPMU to respond to changes in the vCPU
model.
Clear need_cleanup in kvm_pmu_reset() as well so that KVM doesn't
prematurely stop counters, e.g. if KVM enters the guest and enables
counters before the vCPU is scheduled out.
Cc: stable@vger.kernel.org Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Link: https://lore.kernel.org/r/20231103230541.352265-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the common (or at least "ignored") aspects of resetting the vPMU to
common x86 code, along with the stop/release helpers that are no used only
by the common pmu.c.
There is no need to manually handle fixed counters as all_valid_pmc_idx
tracks both fixed and general purpose counters, and resetting the vPMU is
far from a hot path, i.e. the extra bit of overhead to the PMC from the
index is a non-issue.
Zero fixed_ctr_ctrl in common code even though it's Intel specific.
Ensuring it's zero doesn't harm AMD/SVM in any way, and stopping the fixed
counters via all_valid_pmc_idx, but not clearing the associated control
bits, would be odd/confusing.
Make the .reset() hook optional as SVM no longer needs vendor specific
handling.
Cc: stable@vger.kernel.org Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Link: https://lore.kernel.org/r/20231103230541.352265-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.
Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt.
When the VMM writes to ISPENDR0 to set the state pending state of
an SGI, we fail to convey this to the HW if this SGI is already
backed by a GICv4.1 vSGI.
This is a bit of a corner case, as this would only occur if the
vgic state is changed on an already running VM, but this can
apparently happen across a guest reset driven by the VMM.
Fix this by always writing out the pending_latch value to the
HW, and reseting it to false.
kvm_guest_cpu_offline() tries to disable kvmclock regardless if it is
present in the VM. It leads to write to a MSR that doesn't exist on some
configurations, namely in TDX guest:
unchecked MSR access error: WRMSR to 0x12 (tried to write 0x0000000000000000)
at rIP: 0xffffffff8110687c (kvmclock_disable+0x1c/0x30)
kvmclock enabling is gated by CLOCKSOURCE and CLOCKSOURCE2 KVM paravirt
features.
Do not disable kvmclock if it was not enabled.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: c02027b5742b ("x86/kvm: Disable kvmclock on all CPUs on shutdown") Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org
Message-Id: <20231205004510.27164-6-kirill.shutemov@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While convering the binding to new format, serdes address specified in the
old binding was used as the base address. This causes a boot hang as the
driver tries to access memory region outside of the specified address. Fix
it!
We found a failure when using the iperf tool during WiFi performance
testing, where some MSIs were received while clearing the interrupt
status, and these MSIs cannot be serviced.
The interrupt status can be cleared even if the MSI status remains pending.
As such, given the edge-triggered interrupt type, its status should be
cleared before being dispatched to the handler of the underling device.
[kwilczynski: commit log, code comment wording] Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: rewrap comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get
correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to
support iATUs which require a specific alignment.
However, this support cannot have been properly tested.
The whole point is for the iATU to map an address that is aligned,
using dw_pcie_ep_map_addr(), and then let the writel() write to
ep->msi_mem + aligned_offset.
Thus, modify the address that is mapped such that it is aligned.
With this change, dw_pcie_ep_raise_msix_irq() matches the logic in
dw_pcie_ep_raise_msi_irq().
Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I <kishon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomasz, Sebastian, and some Proxmox users reported problems initializing
ixgbe NICs.
I think the problem is that ECAM space described in the ACPI MCFG table is
not reserved via a PNP0C02 _CRS method as required by the PCI Firmware spec
(r3.3, sec 4.1.2), but it *is* included in the PNP0A03 host bridge _CRS as
part of the MMIO aperture.
If we allocate space for a PCI BAR, we're likely to allocate it from that
ECAM space, which obviously cannot work.
This could happen for any device, but in the ixgbe case it happens because
it's an SR-IOV device and the BIOS didn't allocate space for the VF BARs,
so Linux reallocated the bridge window leading to ixgbe and put it on top
of the ECAM space. From Tomasz' system:
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1: bridge window [mem 0xfb900000-0xfbbfffff]
pci 0000:02:00.0: [8086:10fb] type 00 class 0x020000 # ixgbe
pci 0000:02:00.0: reg 0x10: [mem 0xfba80000-0xfbafffff 64bit]
pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:02:00.0: BAR 7: no space for [mem size 0x00100000 64bit] # VF BAR 0
pci_bus 0000:00: No. 2 try to assign unassigned res
pci 0000:00:01.1: resource 14 [mem 0xfb900000-0xfbbfffff] released
pci 0000:00:01.1: BAR 14: assigned [mem 0x80000000-0x806fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x80000000-0x8007ffff 64bit]
pci 0000:02:00.0: BAR 7: assigned [mem 0x80204000-0x80303fff 64bit] # VF BAR 0
The decoder_populate_targets() helper walks all of the targets in a port
and makes sure they can be looked up in @target_map. Where @target_map
is a lookup table from target position to target id (corresponding to a
cxl_dport instance). However @target_map is only responsible for
conveying the active dport instances as indicated by interleave_ways.
When nr_targets > interleave_ways it results in
decoder_populate_targets() walking off the end of the valid entries in
@target_map. Given target_map is initialized to 0 it results in the
dport lookup failing if position 0 is not mapped to a dport with an id
of 0:
cxl_port port3: Failed to populate active decoder targets
cxl_port port3: Failed to add decoder
cxl_port port3: Failed to add decoder3.0
cxl_bus_probe: cxl_port port3: probe: -6
This bug also highlights that when the decoder's ->targets[] array is
written in cxl_port_setup_targets() it is missing a hold of the
targets_lock to synchronize against sysfs readers of the target list. A
fix for that is saved for a later patch.
Fixes: a5c258021689 ("cxl/bus: Populate the target list at decoder create") Cc: <stable@vger.kernel.org> Signed-off-by: Huang, Ying <ying.huang@intel.com>
[djbw: rewrite the changelog, find the Fixes: tag] Co-developed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert KVM's made-up consistency check on SVM's TLB control. The APM says
that unsupported encodings are reserved, but the APM doesn't state that
VMRUN checks for a supported encoding. Unless something is called out
in "Canonicalization and Consistency Checks" or listed as MBZ (Must Be
Zero), AMD behavior is typically to let software shoot itself in the foot.
The patch broke:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
This last command is useful to be able to enslave an interface with only
one netlink message.
After discussion, there is no good reason to support:
> ip link set dummy0 down
> ip link set dummy0 master bond0 up
because the bond interface already set the slave up when it is up.
Cc: stable@vger.kernel.org Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240108094103.2001224-2-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some DSA tagging protocols change the EtherType field in the MAC header
e.g. DSA_TAG_PROTO_(DSA/EDSA/BRCM/MTK/RTL4C_A/SJA1105). On TX these tagged
frames are ignored by the checksum offload engine and IP header checker of
some stmmac cores.
On RX, the stmmac driver wrongly assumes that checksums have been computed
for these tagged packets, and sets CHECKSUM_UNNECESSARY.
Add an additional check in the stmmac TX and RX hotpaths so that COE is
deactivated for packets with ethertypes that will not trigger the COE and
IP header checks.
Fixes: 6b2c6e4a938f ("net: stmmac: propagate feature flags to vlan") Cc: <stable@vger.kernel.org> Reported-by: Richard Tresidder <rtresidd@electromag.com.au> Link: https://lore.kernel.org/netdev/e5c6c75f-2dfa-4e50-a1fb-6bf4cdb617c2@electromag.com.au/ Reported-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://lore.kernel.org/netdev/c57283ed-6b9b-b0e6-ee12-5655c1c54495@bootlin.com/ Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix per-queue statistics for devices with more than one queue.
The output data pointer is currently reset in each loop iteration,
effectively summing all queue statistics in the first four u64 values.
The summary values are not even labeled correctly. For example, if eth0 has
2 queues, ethtool -S eth0 shows:
q0_tx_pkt_n: 374 (actually tx_pkt_n over all queues)
q0_tx_irq_n: 23 (actually tx_normal_irq_n over all queues)
q1_tx_pkt_n: 462 (actually rx_pkt_n over all queues)
q1_tx_irq_n: 446 (actually rx_normal_irq_n over all queues)
q0_rx_pkt_n: 0
q0_rx_irq_n: 0
q1_rx_pkt_n: 0
q1_rx_irq_n: 0
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") Cc: stable@vger.kernel.org Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable firmware_stat is possible to be used without initialization.
Signed-off-by: David Lin <yu-hao.lin@nxp.com> Fixes: 1c5d463c0770 ("wifi: mwifiex: add extra delay for firmware ready") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312192236.ZflaWYCw-lkp@intel.com/ Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231221015511.1032128-1-yu-hao.lin@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AP BSSID configuration is missing at AP start. Without this fix, FW returns
STA interface MAC address after first init. When hostapd restarts, it gets MAC
address from netdev before driver sets STA MAC to netdev again. Now MAC address
between hostapd and net interface are different causes STA cannot connect to
AP. After that MAC address of uap0 mlan0 become the same. And issue disappears
after following hostapd restart (another issue is AP/STA MAC address become the
same).
This patch fixes the issue cleanly.
Signed-off-by: David Lin <yu-hao.lin@nxp.com> Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers") Cc: stable@vger.kernel.org Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231215005118.17031-1-yu-hao.lin@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For SDIO IW416, due to a bug, FW may return ready before complete full
initialization. Command timeout may occur at driver load after reboot.
Workaround by adding 100ms delay at checking FW status.
Signed-off-by: David Lin <yu-hao.lin@nxp.com> Cc: stable@vger.kernel.org Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Brian Norris <briannorris@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin AM62 (IW416) Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231208234029.2197-1-yu-hao.lin@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtlwifi driver comes with custom code to write into PCIe Link
Control register. RMW access for the Link Control register requires
locking that is already provided by the standard PCIe capability
accessors.
Convert the custom RMW code writing into LNKCTL register to standard
RMW capability accessors. The accesses are changed to cover the full
LNKCTL register instead of touching just a single byte of the register.
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
