Currently the resource allocated by crypto_alloc_shash() is not
freed in case ath12k_peer_find() fails, resulting in memory leak.
Add crypto_free_shash() to fix it.
This is found during code review, compile tested only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240526124226.24661-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Handle error code to cause failed to USB probe result from unexpected
USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized
skb list and cause warnings below.
usb 2-1: USB disconnect, device number 76
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114
assign_lock_key kernel/locking/lockdep.c:976 [inline]
register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289
__lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3846
rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline]
rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline]
rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051
usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1270 [inline]
device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x395/0x9f0 drivers/base/core.c:3909
usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418
usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305
hub_port_connect drivers/usb/core/hub.c:5362 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5662 [inline]
port_event drivers/usb/core/hub.c:5822 [inline]
hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904
process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267
process_scheduled_works kernel/workqueue.c:3348 [inline]
worker_thread+0x680/0xf00 kernel/workqueue.c:3429
kthread+0x2c7/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: Shichao Lai <shichaorai@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u Tested-by: Shichao Lai <shichaorai@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 5082b3e3027e ("wifi: ath11k: fix race due to setting
ATH11K_FLAG_EXT_IRQ_ENABLED too early") fixes a race in ath11k
driver. Since ath12k shares the same logic as ath11k, currently
the race also exists in ath12k: in ath12k_pci_ext_irq_enable(),
ATH12K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
In cases where only one MSI vector is allocated, this results
in a race condition: after ATH12K_FLAG_EXT_IRQ_ENABLED is set
but before NAPI enabled, CE interrupt breaks in. Since IRQ is
shared by CE and data path, ath12k_pci_ext_interrupt_handler()
is also called where we call disable_irq_nosync() to disable
IRQ. Then napi_schedule() is called but it does nothing because
NAPI is not enabled at that time, meaning that
ath12k_pci_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Since IRQ
is shared, all interrupts are disabled and we would finally
get no response from target.
So port ath11k fix here, this is done by setting
ATH12K_FLAG_EXT_IRQ_ENABLED after all NAPI and IRQ work are
done. With the fix, we are sure that by the time
ATH12K_FLAG_EXT_IRQ_ENABLED is set, NAPI is enabled.
Note that the fix above also introduce some side effects:
if ath12k_pci_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH12K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240524023642.37030-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.
The Intel Software Developer's Manual defines the scope of HFI (registers
and memory buffer) as a package. Use package scope(*) in the software
representation of an HFI instance.
Using die scope in HFI instances has the effect of creating multiple
conflicting instances for the same package: each instance allocates its
own memory buffer and configures the same package-level registers.
Specifically, only one of the allocated memory buffers can be set in the
MSR_IA32_HW_FEEDBACK_PTR register. CPUs get incorrect HFI data from the
table.
The problem does not affect current HFI-capable platforms because they
all have single-die processors.
(*) We used die scope for HFI instances because there had been
processors with packages enumerated as dies. None of those systems
supported HFI, though. If such a system emerged, it would need to
be quirked.
Similar to other Asus Vivobooks, the Asus Vivobook Pro N6506MJ has a DSDT table
that describes IRQ 1 as ActiveLow, whereas the kernel overrides it to Edge_High.
This discrepancy prevents the internal keyboard from functioning properly. This
patch resolves this issue by adding this laptop to the override table that prevents
the kernel from overriding this IRQ.
Like various other Asus laptops, the Asus Vivobook Pro N6506MV has a
DSDT table that describes IRQ 1 as ActiveLow while the kernel is overriding
it to Edge_High. This prevents the internal keyboard from working. This patch
prevents this issue by adding this laptop to the override table that prevents
the kernel from overriding this IRQ
irqfd_wakeup() gets EPOLLHUP, when it is called by
eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which
gets called under spin_lock_irqsave(). We can't use a mutex here as it
will lead to a deadlock.
The multiple BWMONv4 instances available on the X1E80100 SoC use the
same interrupt number. Mark them are shared to allow for re-use across
instances.
Using IRQF_SHARED coupled with devm_request_threaded_irq implies that
the irq can still trigger during/after bwmon_remove due to other active
bwmon instances. Handle this race by relying on bwmon_disable to disable
the interrupt and coupled with explicit request/free irqs.
If the `amd-pstate` driver is not loaded automatically by default,
it is because the kernel command line parameter has not been added.
To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
function to enable the desired mode (passive/active/guided) before registering
the driver instance.
This ensures that the driver is loaded correctly without relying on the kernel
command line parameter.
When there is no parameter added to command line, Kernel config will
provide the default mode to load.
Meanwhile, user can add driver mode in command line which will override
the kernel config default option.
Reported-by: Andrei Amuraritei <andamu@posteo.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705 Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/83301c4cea4f92fb19e14b23f2bac7facfd8bdbb.1718811234.git.perry.yuan@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.
Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61 Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This ensures that the attribute is created before the device is
announced to userspace, avoiding a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoid a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl.
Split the allocation side out to make the error handling boundary easier
to navigate. The apple driver had been doing this wrong, leaking the
controller device memory on a tagset failure.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
KCSAN has identified a potential data race in debugobjects, where the
global variable debug_objects_maxchain is accessed for both reading and
writing simultaneously in separate and parallel data paths. This results in
the following splat printed by KCSAN:
BUG: KCSAN: data-race in debug_check_no_obj_freed / debug_object_activate
write to 0xffffffff847ccfc8 of 4 bytes by task 734 on cpu 41:
debug_object_activate (lib/debugobjects.c:199 lib/debugobjects.c:564 lib/debugobjects.c:710)
call_rcu (kernel/rcu/rcu.h:227 kernel/rcu/tree.c:2719 kernel/rcu/tree.c:2838)
security_inode_free (security/security.c:1626)
__destroy_inode (./include/linux/fsnotify.h:222 fs/inode.c:287)
...
read to 0xffffffff847ccfc8 of 4 bytes by task 384 on cpu 31:
debug_check_no_obj_freed (lib/debugobjects.c:1000 lib/debugobjects.c:1019)
kfree (mm/slub.c:2081 mm/slub.c:4280 mm/slub.c:4390)
percpu_ref_exit (lib/percpu-refcount.c:147)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5357)
...
value changed: 0x00000070 -> 0x00000071
The data race is actually harmless as this is just used for debugfs
statistics, as all other debug variables.
Annotate all debug variables as racy explicitly, since these variables
are known to be racy and harmless.
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Commit cc27b0c78c79 ("md: fix deadlock between mddev_suspend() and
md_write_start()") aborted md_write_start() with false when mddev is
suspended, which fixed a deadlock if calling mddev_suspend() with
holding reconfig_mutex(). Since mddev_suspend() now includes
lockdep_assert_not_held(), it no longer holds the reconfig_mutex. This
makes previous abort unnecessary. Now, remove unnecessary abort and
change function return value to void.
The deletion of safemode_timer in mddev_suspend() is redundant and
potentially harmful now. If timer is about to be woken up but gets
deleted, 'in_sync' will remain 0 until the next write, causing array
to stay in the 'active' state instead of transitioning to 'clean'.
Commit 0d9f4f135eb6 ("MD: Add del_timer_sync to mddev_suspend (fix
nasty panic))" introduced this deletion for dm, because if timer fired
after dm is destroyed, the resource which the timer depends on might
have been freed.
However, commit 0dd84b319352 ("md: call __md_stop_writes in md_stop")
added __md_stop_writes() to md_stop(), which is called before freeing
resource. Timer is deleted in __md_stop_writes(), and the origin issue
is resolved. Therefore, delete safemode_timer can be removed safely now.
Framework Laptops' ACPI exposes the EC with id "PNP0C09". But
"PNP0C09" is part of the ACPI standard; there are lots of computers
with EC chips with this id, and most of them don't support the cros_ec
protocol.
The driver could find the ACPI device by having "PNP0C09" in the
acpi_match_table, but this would match devices which don't support the
cros_ec protocol. Instead, add a new quirk "CROS_EC_LPC_QUIRK_ACPI_ID"
which allows the id to be specified. This quirk is applied after the
DMI check shows that the device is supported.
Tested-by: Dustin L. Howett <dustin@howett.net> Signed-off-by: Ben Walsh <ben@jubnut.com> Link: https://lore.kernel.org/r/20240605063351.14836-4-ben@jubnut.com Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1612160b9127 ("rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks")
This latter commit removes the use of SRCU that used to cover the
RCU-tasks blind spot on exit between the tasklist's removal and the
final preemption disabling. The task is now placed instead into a
temporary list inside which voluntary sleeps are accounted as RCU-tasks
quiescent states. This would disarm the deadlock initially reported
against PID namespace exit.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the usb id of the HX1200i Series 2023. Update the documentation
accordingly. Also fix the version comments, there are no Series 2022
products. That are legacy or first version products going back many
many years.
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
- Use kunit_kcalloc() to allocate the defaults table so that it will be
freed when the test case ends.
- kfree() the buf and *data buffers on the error paths.
- Use kunit_add_action_or_reset() instead of kunit_add_action() so that
if it fails it will call regmap_exit().
As noted in the device errata [1-8], EEE support is not fully operational
in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing
link drops when connected to another device that supports EEE. The patch
series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f77162 caused EEE support to be enabled in these devices. A fix for
this regression for the KSZ9477 alone was merged in commit 08c6d8bae48c2.
This patch extends this fix to the other affected devices.
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When l2tp tunnels use a socket provided by userspace, we can hit
lockdep splats like the below when data is transmitted through another
(unrelated) userspace socket which then gets routed over l2tp.
This issue was previously discussed here:
https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/
The solution is to have lockdep treat socket locks of l2tp tunnel
sockets separately than those of standard INET sockets. To do so, use
a different lockdep subclass where lock nesting is possible.
============================================
WARNING: possible recursive locking detected
6.10.0+ #34 Not tainted
--------------------------------------------
iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0
but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10
other info that might help us debug this:
Possible unsafe locking scenario:
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Reported-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent commit has modified the code in __bnxt_reserve_rings() to
set the default RSS indirection table to default only when the number
of RX rings is changing. While this works for newer firmware that
requires RX ring reservations, it causes the regression on older
firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns
false).
With older firmware, RX ring reservations are not required and so
hw_resc->resv_rx_rings is not always set to the proper value. The
comparison:
if (old_rx_rings != bp->hw_resc.resv_rx_rings)
in __bnxt_reserve_rings() may be false even when the RX rings are
changing. This will cause __bnxt_reserve_rings() to skip setting
the default RSS indirection table to default to match the current
number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to
use an out-of-range index.
We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this
scenario. We just need to move it up in bnxt_need_reserve_rings()
to be called unconditionally when using older firmware. Without the
fix, if the TX rings are changing, we'll skip the
bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also
skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained
in the last paragraph. Without setting the default RSS indirection
table to default, it causes the regression:
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The number of fallback reasons defined in the smc_clc.h file has reached
36. For historical reasons, some are no longer quoted, and there's 33
actually in use. So, add the max value of fallback reason count to 36.
Fixes: 6ac1e6563f59 ("net/smc: support smc v2.x features validate") Fixes: 7f0620b9940b ("net/smc: support max connections per lgr negotiation") Fixes: 69b888e3bb4b ("net/smc: support max links per lgr negotiation in clc handshake") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This restores behaviour (including the comment) from now-removed
hci_request.c, and also matches existing code for active scanning.
Without this, the duplicates filter is always active when passive
scanning, which makes it impossible to work with devices that send
nontrivial dynamic data in their advertisement reports.
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Anton Khirnov <anton@khirnov.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
Don't break the resize action if the vq coalescing feature
named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated.
Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Eugenio Pé rez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.
Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.
Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues") Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver") Signed-off-by: Kyle Swenson <kyle.swenson@est.tech> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in
reuseport_add_sock(). [0]
The repro first creates a listener with SO_REUSEPORT. Then, it creates
another listener on the same port and concurrently closes the first
listener.
The second listen() calls reuseport_add_sock() with the first listener as
sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently,
but the close() does clear it by reuseport_detach_sock().
The problem is SCTP does not properly synchronise reuseport_alloc(),
reuseport_add_sock(), and reuseport_detach_sock().
The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must
provide synchronisation for sockets that are classified into the same
reuseport group.
Otherwise, such sockets form multiple identical reuseport groups, and
all groups except one would be silently dead.
1. Two sockets call listen() concurrently
2. No socket in the same group found in sctp_ep_hashtable[]
3. Two sockets call reuseport_alloc() and form two reuseport groups
4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives
incoming packets
Also, the reported null-ptr-deref could occur.
TCP/UDP guarantees that would not happen by holding the hash bucket lock.
Let's apply the locking strategy to __sctp_hash_endpoint() and
__sctp_unhash_endpoint().
Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper")
reworked the driver to use devm. While at it, the i2c_set_clientdata
was dropped along with the remove callback. Unfortunately other parts
of the driver also rely on i2c clientdata so this causes kernel oops.
Bring the call back to fix the driver.
Fixes: 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper") Tested-by: Raymond Hackley <raymondhackley@protonmail.com> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20240605-rt5033-null-clientdata-v1-1-558d710eeb4d@trvn.ru Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As per MS-FSA 2.1.5.10.14, support for FSCTL_GET_REPARSE_POINT is
optional and if the server doesn't support it,
STATUS_INVALID_DEVICE_REQUEST must be returned for the operation.
If we find files with reparse points and we can't read them due to
lack of client or server support, just ignore it and then treat them
as regular files or junctions.
Fixes: 5f71ebc41294 ("smb: client: parse reparse point flag in create response") Reported-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de> Tested-by: Sebastian Steinbeisser <Sebastian.Steinbeisser@lrz.de> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions.
Fixes: 16a3fe634f6a ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses") Signed-off-by: Laura Nao <laura.nao@collabora.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following bug was triggered on a system built with
CONFIG_DEBUG_PREEMPT=y:
# echo p > /proc/sysrq-trigger
BUG: using smp_processor_id() in preemptible [00000000] code: sh/117
caller is perf_event_print_debug+0x1a/0x4c0
CPU: 3 UID: 0 PID: 117 Comm: sh Not tainted 6.11.0-rc1 #109
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
check_preemption_disabled+0xc8/0xd0
perf_event_print_debug+0x1a/0x4c0
__handle_sysrq+0x140/0x180
write_sysrq_trigger+0x61/0x70
proc_reg_write+0x4e/0x70
vfs_write+0xd0/0x430
? handle_mm_fault+0xc8/0x240
ksys_write+0x9c/0xd0
do_syscall_64+0x96/0x190
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is because the commit d4b294bf84db ("perf/x86: Hybrid PMU support
for counters") took smp_processor_id() outside the irq critical section.
If a preemption occurs in perf_event_print_debug() and the task is
migrated to another cpu, we may get incorrect pmu debug information.
Move smp_processor_id() back inside the irq critical section to fix this
issue.
Fixes: d4b294bf84db ("perf/x86: Hybrid PMU support for counters") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20240729220928.325449-1-lihuafei1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The current perf assumes that both GP and fixed counters are contiguous.
But it's not guaranteed on newer Intel platforms or in a virtualization
environment.
Use the counter mask to replace the number of counters for both GP and
the fixed counters. For the other ARCHs or old platforms which don't
support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to
replace. There is no functional change for them.
The interface to KVM is not changed. The number of counters still be
passed to KVM. It can be updated later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lkml.kernel.org/r/20240626143545.480761-3-kan.liang@linux.intel.com
Stable-dep-of: f73cefa3b72e ("perf/x86: Fix smp_processor_id()-in-preemptible warnings") Signed-off-by: Sasha Levin <sashal@kernel.org>
The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.
Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com
Stable-dep-of: f73cefa3b72e ("perf/x86: Fix smp_processor_id()-in-preemptible warnings") Signed-off-by: Sasha Levin <sashal@kernel.org>
except of course, that while !old is only true for old == 0, old is
true for everything except old == 0.
Fix it to read:
atomic_cmpxchg(&key->enabled, 1, 0) == 1
such that only the 1->0 transition returns true and goes on to disable
the keys.
Fixes: 83ab38ef0a0b ("jump_label: Fix concurrency issues in static_key_slow_dec()") Reported-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lkml.kernel.org/r/20240731105557.GY33588@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
If the IFS scan test exits prematurely due to a timeout before
completing a single run, the union ifs_status remains uninitialized,
leading to incorrect test status reporting. To prevent this, always
initialize the union ifs_status to zero.
Fixes: 2b40e654b73a ("platform/x86/intel/ifs: Add scan test support") Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240730155930.1754744-1-sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into virtual
address space as a contiguous region and determines the address of a node
by using the node ID as index.
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may
run on multiple CPU cores racing with themselves.
This race gets hit on Dell Venue 7140 tablets when undocking from
the keyboard, causing the handler to try and register priv->switches_dev
twice, as can be seen from the dev_info() message getting logged twice:
[ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
[ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17
[ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
After which things go seriously wrong:
[ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17'
...
[ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory.
[ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018
...
Protect intel-vbtn notify_handler() from racing with itself with a mutex
to fix this.
Fixes: e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") Reported-by: En-Wei Wu <en-wei.wu@canonical.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2073001 Tested-by: Kostadin Stoilov <kmstoilov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240729120443.14779-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
dm_dp_mst_is_port_support_mode() is a bit not following the original design rule and cause
light up issue with multiple 4k monitors after mst dsc hub.
[How]
Refactor function dm_dp_mst_is_port_support_mode() a bit to solve the light up issue.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[kevin@holm.dev: Resolved merge conflict in .../amdgpu_dm_mst_types.c] Fixes: 4df96ba6676034 ("drm/amd/display: Add timing pixel encoding for mst mode validation") Link: https://lore.kernel.org/stable/d74a7768e957e6ce88c27a5bece0c64dff132e24@holm.dev/T/#u Signed-off-by: Kevin Holm <kevin@holm.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.
The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.
The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.
The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.
The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.
When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.
With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.
Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().
Fixes: 04e4cd4f7ca4 ("mptcp: cleanup mptcp_subflow_discard_data()") Cc: stable@vger.kernel.org Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.
Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.
This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.
It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.
This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.
Found by code review.
Cc: stable@vger.kernel.org Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This refresh statement was originally present in the original patch:
https://lore.kernel.org/netdev/20221121191437.996297-2-shr@devkernel.io/
It has been removed with no explanation in v6:
https://lore.kernel.org/netdev/20230201222254.744422-2-shr@devkernel.io/
It is important to make the refresh for multishot requests, because if no
new requests using the same NAPI device are added to the ring, the entry
will become stale and be removed silently. The unsuspecting user will
not know that their ring had busy polling for only 60 seconds before
being pruned.
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
DISCOVERY_FINDING shall only be set for active scanning as passive
scanning is not meant to generate MGMT Device Found events causing
discovering state to go out of sync since userspace would believe it
is discovering when in fact it is just passive scanning.
Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1ba38 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fetching of userspace memory fails during the main loop, all drm sync
objs looked up until that point will be leaked because of the missing
drm_syncobj_put.
Fix it by exporting and using a common cleanup helper.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: bae7cb5d6800 ("drm/v3d: Create a CPU job extension for the reset performance query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-4-tursulin@igalia.com
(cherry picked from commit 484de39fa5f5b7bd0c5f2e2c5265167250ef7501) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fetching of userspace memory fails during the main loop, all drm sync
objs looked up until that point will be leaked because of the missing
drm_syncobj_put.
Fix it by exporting and using a common cleanup helper.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 9ba0ff3e083f ("drm/v3d: Create a CPU job extension for the timestamp query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-3-tursulin@igalia.com
(cherry picked from commit 753ce4fea62182c77e1691ab4f9022008f25b62e) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check that the number of perfmons userspace is passing in the copy and
reset extensions is not greater than the internal kernel storage where
the ids will be copied into.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: bae7cb5d6800 ("drm/v3d: Create a CPU job extension for the reset performance query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-2-tursulin@igalia.com
(cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
(cherry picked from commit 833cf12846aa19adf9b76bc79c40747726f3c0c1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suspend will disable pcie device. Thus, resume should do full hw
initialization again.
Add some APIs to ast_drm_thaw() before ast_post_gpu() to fix the issue.
v2:
- fix function-call arguments
Fixes: 5b71707dd13c ("drm/ast: Enable and unlock device access early during init") Reported-by: Cary Garrett <cogarre@gmail.com> Closes: https://lore.kernel.org/dri-devel/8ce1e1cc351153a890b65e62fed93b54ccd43f6a.camel@gmail.com/ Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240718030352.654155-1-jammy_huang@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power up the ASTDP connector for connection status detection if the
connector is not active. Keep it powered if a display is attached.
This fixes a bug where the connector does not come back after
disconnecting the display. The encoder's atomic_disable turns off
power on the physical connector. Further HPD reads will fail,
thus preventing the driver from detecting re-connected displays.
For connectors that are actively used, only test the HPD flag without
touching power.
Fixes: f81bb0ac7872 ("drm/ast: report connection status on Display Port.") Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dumb buffers can be used in kms but also through prime with gallium's
resource_from_handle. In the second case the dumb buffers can be
rendered by the GPU where with the regular DRM kms interfaces they
are mapped and written to by the CPU. Because the same buffer can
be written to by the GPU and CPU vmwgfx needs to use vmw_surface (object
which properly tracks dirty state of the guest and gpu memory)
instead of vmw_bo (which is just guest side memory).
Furthermore the dumb buffer handles are expected to be gem objects by
a lot of userspace.
Make vmwgfx accept gem handles in prime and kms but internally switch
to vmw_surface's to properly track the dirty state of the objects between
the GPU and CPU.
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: 2298e804e96e ("drm/vmwgfx: rework to new fence interface, v2") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-2-zack.rusin@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
