When trying to set MCR[2], XON1 is incorrectly accessed instead. And when
writing to the TCR register to configure flow control levels, we are
incorrectly writing to the MSR register. The default value of $00 is then
used for TCR, which means that selectable trigger levels in FCR are used
in place of TCR.
TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2]
to be set. EFR[4] is already set in probe().
MCR access requires LCR[7] to be zero.
Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly
accessed instead because MCR shares the same address space as XON1.
Since MCR[2] is unmodified and still zero, when writing to TCR we are in
fact writing to MSR because TCR/TLR registers share the same address space
as MSR/SPR.
Fix by first removing useless reconfiguration of EFR[4] (enable enhanced
functions), as it is already enabled in sc16is7xx_probe() since commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed").
Now LCR is $00, which means that MCR access is enabled.
Also remove regcache_cache_bypass() calls since we no longer access the
enhanced registers set, and TCR is already declared as volatile (in fact
by declaring MSR as volatile, which shares the same address).
Finally disable access to TCR/TLR registers after modifying them by
clearing MCR[2].
Note: the comment about "... and internal clock div" is wrong and can be
ignored/removed as access to internal clock div registers (DLL/DLH)
is permitted only when LCR[7] is logic 1, not when enhanced features
is enabled. And DLL/DLH access is not needed in sc16is7xx_startup().
This reverts commit 5537a4679403 ("net: usb: asix: ax88772: drop
phylink use in PM to avoid MDIO runtime PM wakeups"), it breaks
operation of asix ethernet usb dongle after system suspend-resume
cycle.
If a proximity event node is defined so as to specify the wake-up
properties of the touch surface, the proximity event interrupt is
enabled unconditionally. This may result in unwanted interrupts.
Solve this problem by enabling the interrupt only if the event is
mapped to a key or switch code.
When testing softirq based hrtimers on an ARM32 board, with high resolution
mode and NOHZ inactive, softirq based hrtimers fail to expire after being
moved away from an offline CPU:
CPU0 CPU1
hrtimer_start(..., HRTIMER_MODE_SOFT);
cpu_down(CPU1) ...
hrtimers_cpu_dying()
// Migrate timers to CPU0
smp_call_function_single(CPU0, returgger_next_event);
retrigger_next_event()
if (!highres && !nohz)
return;
As retrigger_next_event() is a NOOP when both high resolution timers and
NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not
updated and the migrated softirq timers never expire unless there is a
softirq based hrtimer queued on CPU0 later.
Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check
in retrigger_next_event(), which enforces a full update of the CPU base.
As this is not a fast path the extra cost does not matter.
[ tglx: Massaged change log ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Co-developed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Notice the zero in the range [32K, 60K), which is incorrect.
[CAUSE]
With extra trace printk, it shows the following events during od:
(some unrelated info removed like CPU and context)
od-3457 btrfs_do_readpage: enter r/i=5/258 folio=0(65536) prev_em_start=0000000000000000
The "r/i" is indicating the root and inode number. In our case the file
"new" is using ino 258 from fs tree (root 5).
Here notice the @prev_em_start pointer is NULL. This means the
btrfs_do_readpage() is called from btrfs_read_folio(), not from
btrfs_readahead().
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=0 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=4096 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=8192 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=12288 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=16384 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=20480 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=24576 got em start=0 len=32768
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=28672 got em start=0 len=32768
These above 32K blocks will be read from the first half of the
compressed data extent.
od-3457 btrfs_do_readpage: r/i=5/258 folio=0(65536) cur=32768 got em start=32768 len=32768
Note here there is no btrfs_submit_compressed_read() call. Which is
incorrect now.
Although both extent maps at 0 and 32K are pointing to the same compressed
data, their offsets are different thus can not be merged into the same
read.
So this means the compressed data read merge check is doing something
wrong.
The function btrfs_submit_compressed_read() is only called at the end of
folio read. The compressed bio will only have an extent map of range [0,
32K), but the original bio passed in is for the whole 64K folio.
This will cause the decompression part to only fill the first 32K,
leaving the rest untouched (aka, filled with zero).
This incorrect compressed read merge leads to the above data corruption.
There were similar problems that happened in the past, commit 808f80b46790
("Btrfs: update fix for read corruption of compressed and shared
extents") is doing pretty much the same fix for readahead.
But that's back to 2015, where btrfs still only supports bs (block size)
== ps (page size) cases.
This means btrfs_do_readpage() only needs to handle a folio which
contains exactly one block.
Only btrfs_readahead() can lead to a read covering multiple blocks.
Thus only btrfs_readahead() passes a non-NULL @prev_em_start pointer.
With v5.15 kernel btrfs introduced bs < ps support. This breaks the above
assumption that a folio can only contain one block.
Now btrfs_read_folio() can also read multiple blocks in one go.
But btrfs_read_folio() doesn't pass a @prev_em_start pointer, thus the
existing bio force submission check will never be triggered.
In theory, this can also happen for btrfs with large folios, but since
large folio is still experimental, we don't need to bother it, thus only
bs < ps support is affected for now.
[FIX]
Instead of passing @prev_em_start to do the proper compressed extent
check, introduce one new member, btrfs_bio_ctrl::last_em_start, so that
the existing bio force submission logic will always be triggered.
We recently received a report of poor performance doing sequential
buffered reads of a file with compressed extents. With bs=128k, a naive
sequential dd ran as fast on a compressed file as on an uncompressed
(1.2GB/s on my reproducing system) while with bs<32k, this performance
tanked down to ~300MB/s.
The cause of this slowness is overhead to do with looking up extent_maps
to enable readahead pre-caching on compressed extents
(add_ra_bio_pages()), as well as some overhead in the generic VFS
readahead code we hit more in the slow case. Notably, the main
difference between the two read sizes is that in the large sized request
case, we call btrfs_readahead() relatively rarely while in the smaller
request we call it for every compressed extent. So the fast case stays
in the btrfs readahead loop:
while ((folio = readahead_folio(rac)) != NULL)
btrfs_do_readpage(folio, &em_cached, &bio_ctrl, &prev_em_start);
where the slower one breaks out of that loop every time. This results in
calling add_ra_bio_pages a lot, doing lots of extent_map lookups,
extent_map locking, etc.
This happens because although add_ra_bio_pages() does add the
appropriate un-compressed file pages to the cache, it does not
communicate back to the ractl in any way. To solve this, we should be
using readahead_expand() to signal to readahead to expand the readahead
window.
This change passes the readahead_control into the btrfs_bio_ctrl and in
the case of compressed reads sets the expansion to the size of the
extent_map we already looked up anyway. It skips the subpage case as
that one already doesn't do add_ra_bio_pages().
With this change, whether we use bs=4k or bs=128k, btrfs expands the
readahead window up to the largest compressed extent we have seen so far
(in the trivial example: 128k) and the call stacks of the two modes look
identical. Notably, we barely call add_ra_bio_pages at all. And the
performance becomes identical as well. So this change certainly "fixes"
this performance problem.
Of course, it does seem to beg a few questions:
1. Will this waste too much page cache with a too large ra window?
2. Will this somehow cause bugs prevented by the more thoughtful
checking in add_ra_bio_pages?
3. Should we delete add_ra_bio_pages?
My stabs at some answers:
1. Hard to say. See attempts at generic performance testing below. Is
there a "readahead_shrink" we should be using? Should we expand more
slowly, by half the remaining em size each time?
2. I don't think so. Since the new behavior is indistinguishable from
reading the file with a larger read size passed in, I don't see why
one would be safe but not the other.
3. Probably! I tested that and it was fine in fstests, and it seems like
the pages would get re-used just as well in the readahead case.
However, it is possible some reads that use page cache but not
btrfs_readahead() could suffer. I will investigate this further as a
follow up.
I tested the performance implications of this change in 3 ways (using
compress-force=zstd:3 for compression):
Directly test the affected workload of small sequential reads on a
compressed file (improved from ~250MB/s to ~1.2GB/s)
==========for-next==========
dd /mnt/lol/non-cmpr 4k 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.02983 s, 712 MB/s
dd /mnt/lol/non-cmpr 128k
32768+0 records in
32768+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 5.92403 s, 725 MB/s
dd /mnt/lol/cmpr 4k 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 17.8832 s, 240 MB/s
dd /mnt/lol/cmpr 128k
32768+0 records in
32768+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.71001 s, 1.2 GB/s
==========ra-expand==========
dd /mnt/lol/non-cmpr 4k 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.09001 s, 705 MB/s
dd /mnt/lol/non-cmpr 128k
32768+0 records in
32768+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 6.07664 s, 707 MB/s
dd /mnt/lol/cmpr 4k 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.79531 s, 1.1 GB/s
dd /mnt/lol/cmpr 128k
32768+0 records in
32768+0 records out 4294967296 bytes (4.3 GB, 4.0 GiB) copied, 3.69533 s, 1.2 GB/s
Built the linux kernel from clean (no change)
Ran fsperf. Mostly neutral results with some improvements and
regressions here and there.
Reported-by: Dimitrios Apostolou <jimis@gmx.net> Link: https://lore.kernel.org/linux-btrfs/34601559-6c16-6ccc-1793-20a97ca0dbba@gmx.net/ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
[ Assert doesn't take a format string ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When restoring a reservation for an anonymous page, we need to check to
freeing a surplus. However, __unmap_hugepage_range() causes data race
because it reads h->surplus_huge_pages without the protection of
hugetlb_lock.
And adjust_reservation is a boolean variable that indicates whether
reservations for anonymous pages in each folio should be restored.
Therefore, it should be initialized to false for each round of the loop.
However, this variable is not initialized to false except when defining
the current adjust_reservation variable.
This means that once adjust_reservation is set to true even once within
the loop, reservations for anonymous pages will be restored
unconditionally in all subsequent rounds, regardless of the folio's state.
To fix this, we need to add the missing hugetlb_lock, unlock the
page_table_lock earlier so that we don't lock the hugetlb_lock inside the
page_table_lock lock, and initialize adjust_reservation to false on each
round within the loop.
Link: https://lkml.kernel.org/r/20250823182115.1193563-1-aha310510@gmail.com Fixes: df7a6d1f6405 ("mm/hugetlb: restore the reservation if needed") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Reported-by: syzbot+417aeb05fd190f3a6da9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=417aeb05fd190f3a6da9 Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Breno Leitao <leitao@debian.org> Cc: David Hildenbrand <david@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Page vs folio differences ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs.
Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com Fixes: f5a79d7c0c87 ("mm/damon: introduce struct damos_access_pattern") Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Cc: <stable@vger.kernel.org> [6.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com Fixes: a61ea561c871 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring") Signed-off-by: Stanislav Fort <disclosure@aisle.com> Reported-by: Stanislav Fort <disclosure@aisle.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the parent directory's i_rwsem is not locked, req->r_parent may become
stale due to concurrent operations (e.g. rename) between dentry lookup and
message creation. Validate that r_parent matches the encoded parent inode
and update to the correct inode if a mismatch is detected.
[ idryomov: folded a follow-up fix from Alex to drop extra reference
from ceph_get_reply_dir() in ceph_fill_trace():
ceph_get_reply_dir() may return a different, referenced inode when
r_parent is stale and the parent directory lock is not held.
ceph_fill_trace() used that inode but failed to drop the reference
when it differed from req->r_parent, leaking an inode reference.
Keep the directory inode in a local variable and iput() it at
function end if it does not match req->r_parent. ]
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ]
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
The race condition occurs because:
1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it:
- Releases PSI triggers via cgroup_file_release()
- Frees of->priv through kernfs_drain_open_files()
2. While epoll still holds reference to the file and continues polling
3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv
To address this issue, introduce kernfs_get_active_of() for kernfs open
files to obtain active references. This function will fail if the open file
has been released. Replace kernfs_get_active() with kernfs_get_active_of()
to prevent further operations on released file descriptors.
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
There can be multiple engine info packages in one IB and the first one
may be common engine, not decode/encode.
We need to parse the entire IB instead of stopping after finding first
engine info.
Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc8f9f0f45166a6b37864e7a031c726981d6e5fc) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason to require this to happen on first submitted IB only.
We need to wait for the queue to be idle, but it can be done at any
time (including when there are multiple video sessions active).
Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8908fdce0634a623404e9923ed2f536101a39db5) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VRAM+TT bos that are evicted from VRAM to TT may remain in
TT also after a revalidation following eviction or suspend.
This manifests itself as applications becoming sluggish
after buffer objects get evicted or after a resume from
suspend or hibernation.
If the bo supports placement in both VRAM and TT, and
we are on DGFX, mark the TT placement as fallback. This means
that it is tried only after VRAM + eviction.
This flaw has probably been present since the xe module was
upstreamed but use a Fixes: commit below where backporting is
likely to be simple. For earlier versions we need to open-
code the fallback algorithm in the driver.
v2:
- Remove check for dgfx. (Matthew Auld)
- Update the xe_dma_buf kunit test for the new strategy (CI)
- Allow dma-buf to pin in current placement (CI)
- Make xe_bo_validate() for pinned bos a NOP.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5995 Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6") Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20250904160715.2613-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit cb3d7b3b46b799c96b54f8e8fe36794a55a77f0b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The for_each_child_of_node() helper drops the reference it takes to each
node as it iterates over children and an explicit of_node_put() is only
needed when exiting the loop early.
Drop the recently introduced bogus additional reference count decrement
at each iteration that could potentially lead to a use-after-free.
Fixes: 1f403699c40f ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv") Cc: Ma Ke <make24@iscas.ac.cn> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829090345.21075-2-johan@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters
application".
DAMON's RECLAIM and LRU_SORT modules perform no validation on
user-configured parameters during application, which may lead to
division-by-zero errors.
Avoid the divide-by-zero by adding validation checks when DAMON modules
attempt to apply the parameters.
This patch (of 2):
During the calculation of 'hot_thres' and 'cold_thres', either
'sample_interval' or 'aggr_interval' is used as the divisor, which may
lead to division-by-zero errors. Fix it by directly returning -EINVAL
when such a case occurs. Additionally, since 'aggr_interval' is already
required to be set no smaller than 'sample_interval' in damon_set_attrs(),
only the case where 'sample_interval' is zero needs to be checked.
Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting") Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Cc: <stable@vger.kernel.org> [6.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Duplicate memory errors can be reported by multiple sources.
Passing an already poisoned page to action_result() causes issues:
* The amount of hardware corrupted memory is incorrectly updated.
* Per NUMA node MF stats are incorrectly updated.
* Redundant "already poisoned" messages are printed.
Avoid those issues by:
* Skipping hardware corrupted memory updates for already poisoned pages.
* Skipping per NUMA node MF stats updates for already poisoned pages.
* Dropping redundant "already poisoned" messages.
Make MF_MSG_ALREADY_POISONED consistent with other action_page_types and
make calls to action_result() consistent for already poisoned normal pages
and huge pages.
Link: https://lkml.kernel.org/r/aLCiHMy12Ck3ouwC@hpe.com Fixes: b8b9488d50b7 ("mm/memory-failure: improve memory failure action_result messages") Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com> Reviewed-by: Jiaqi Yan <jiaqiyan@google.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Kyle Meyer <kyle.meyer@hpe.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root cause is that unpoison_memory() tries to check the PG_HWPoison
flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is
triggered. This can be reproduced by below steps:
This scenario can be identified by pfn_to_online_page() returning NULL.
And ZONE_DEVICE pages are never expected, so we can simply fail if
pfn_to_online_page() == NULL to fix the bug.
Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8ee53820edfd ("thp: mmu_notifier_test_young") introduced
mmu_notifier_test_young(), but we are passing the wrong address.
In xxx_scan_pmd(), the actual iteration address is "_address" not
"address". We seem to misuse the variable on the very beginning.
Change it to the right one.
[akpm@linux-foundation.org fix whitespace, per everyone] Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com Fixes: 8ee53820edfd ("thp: mmu_notifier_test_young") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Nico Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FUSE protocol uses struct fuse_write_out to convey the return value of
copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE
interface supports a 64-bit size copies.
Currently the number of bytes copied is silently truncated to 32-bit, which
may result in poor performance or even failure to copy in case of
truncation to zero.
In case OOB write is requested during a data write, ECC is currently
lost. Avoid this issue by only writing in the free spare area.
This issue has been seen with a YAFFS2 file system.
Having setup time 0 violates tAR, tCLR of some chips, for instance
TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte
being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of
98 dc 90 15 76 ...).
Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation
[1], but it looks more appropriate to just calculate setup time properly.
Drop phylink_{suspend,resume}() from ax88772 PM callbacks.
MDIO bus accesses have their own runtime-PM handling and will try to
wake the device if it is suspended. Such wake attempts must not happen
from PM callbacks while the device PM lock is held. Since phylink
{sus|re}sume may trigger MDIO, it must not be called in PM context.
No extra phylink PM handling is required for this driver:
- .ndo_open/.ndo_stop control the phylink start/stop lifecycle.
- ethtool/phylib entry points run in process context, not PM.
- phylink MAC ops program the MAC on link changes after resume.
There is a race condition between inode eviction and inode caching that
can cause a live struct btrfs_inode to be missing from the root->inodes
xarray. Specifically, there is a window during evict() between the inode
being unhashed and deleted from the xarray. If btrfs_iget() is called
for the same inode in that window, it will be recreated and inserted
into the xarray, but then eviction will delete the new entry, leaving
nothing in the xarray:
In turn, this can cause issues for subvolume deletion. Specifically, if
an inode is in this lost state, and all other inodes are evicted, then
btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely.
If the lost inode has a delayed_node attached to it, then when
btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(),
it will loop forever because the delayed_nodes xarray will never become
empty (unless memory pressure forces the inode out). We saw this
manifest as soft lockups in production.
Fix it by only deleting the xarray entry if it matches the given inode
(using __xa_cmpxchg()).
Fixes: 310b2f5d5a94 ("btrfs: use an xarray to track open inodes in a root") Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Co-authored-by: Leo Martins <loemra.dev@gmail.com> Signed-off-by: Leo Martins <loemra.dev@gmail.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
# make the cleaner thread run
btrfs filesystem sync mnt
sleep 1
btrfs filesystem sync mnt
btrfs qgroup destroy 1/1 mnt
will fail with EBUSY. The reason is that 1/1 does the quick accounting
when we assign subvol to it, gaining its exclusive usage as excl and
excl_cmpr. But then when we delete subvol, the decrement happens via
record_squota_delta() which does not update excl_cmpr, as squotas does
not make any distinction between compressed and normal extents. Thus,
we increment excl_cmpr but never decrement it, and are unable to delete
1/1. The two possible fixes are to make squota always mirror excl and
excl_cmpr or to make the fast accounting separately track the plain and
cmpr numbers. The latter felt cleaner to me so that is what I opted for.
Fixes: 1e0e9d5771c3 ("btrfs: add helper for recording simple quota deltas") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the
extent list of this running mmap executable. The user supplied buffer to
hold the fiemap information page faults calling ocfs2_page_mkwrite() which
will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same
semaphore. This recursive semaphore will hold filesystem locks and causes
a hang of the fileystem.
The ip_alloc_sem protects the inode extent list and size. Release the
read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap()
and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock
on the last extent but simplifies the error path.
Link: https://lkml.kernel.org/r/61d1a62b-2631-4f12-81e2-cd689914360b@oracle.com Fixes: 00dc417fa3e7 ("ocfs2: fiemap support") Signed-off-by: Mark Tinguely <mark.tinguely@oracle.com> Reported-by: syzbot+541dcc6ee768f77103e7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=541dcc6ee768f77103e7 Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Users reported a scenario where MPTCP connections that were configured
with SO_KEEPALIVE prior to connect would fail to enable their keepalives
if MTPCP fell back to TCP mode.
After investigating, this affects keepalives for any connection where
sync_socket_options is called on a socket that is in the closed or
listening state. Joins are handled properly. For connects,
sync_socket_options is called when the socket is still in the closed
state. The tcp_set_keepalive() function does not act on sockets that
are closed or listening, hence keepalive is not immediately enabled.
Since the SO_KEEPOPEN flag is absent, it is not enabled later in the
connect sequence via tcp_finish_connect. Setting the keepalive via
sockopt after connect does work, but would not address any subsequently
created flows.
Fortunately, the fix here is straight-forward: set SOCK_KEEPOPEN on the
subflow when calling sync_socket_options.
The fix was valdidated both by using tcpdump to observe keepalive
packets not being sent before the fix, and being sent after the fix. It
was also possible to observe via ss that the keepalive timer was not
enabled on these sockets before the fix, but was enabled afterwards.
Clang 22 recently added support for defining __SANITIZE__ macros similar
to GCC [1], which causes warnings (or errors with CONFIG_WERROR=y or W=e)
with the existing defines that the kernel creates to emulate this behavior
with existing clang versions.
In file included from <built-in>:3:
In file included from include/linux/compiler_types.h:171:
include/linux/compiler-clang.h:37:9: error: '__SANITIZE_THREAD__' macro redefined [-Werror,-Wmacro-redefined]
37 | #define __SANITIZE_THREAD__
| ^
<built-in>:352:9: note: previous definition is here
352 | #define __SANITIZE_THREAD__ 1
| ^
Refactor compiler-clang.h to only define the sanitizer macros when they
are undefined and adjust the rest of the code to use these macros for
checking if the sanitizers are enabled, clearing up the warnings and
allowing the kernel to easily drop these defines when the minimum
supported version of LLVM for building the kernel becomes 22.0.0 or newer.
dma_free_coherent() must only be called if the corresponding
dma_alloc_coherent() call has succeeded. Calling it when the allocation fails
leads to undefined behavior.
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can
cause various locking issues; see the following stack trace (edited for
style) as one example:
The above was reproduced on bpf-next (b338cf849ec8) by modifying
./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during
ops.runnable(), and hacking the memcg accounting code a bit to make
a bpf_timer_init() call more likely to raise an MEMCG_MAX event.
We have also run into other similar variants (both internally and on
bpf-next), including double-acquiring cgroup_file_kn_lock, the same
worker_pool::lock, etc.
As suggested by Shakeel, fix this by using __GFP_HIGH instead of
GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg()
raises an MEMCG_MAX event, we call __memcg_memory_event() with
@allow_spinning=false and avoid calling cgroup_file_notify() there.
Depends on mm patch
"memcg: skip cgroup_file_notify if spinning is not allowed":
https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/
fails with warning: "Kernel filter failed: No error information"
when using config:
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
The issue arises because commits:
1. "bpf: Fix array bounds error with may_goto" changed default runtime to
__bpf_prog_ret0_warn when jit_requested = 1
2. "bpf: Avoid __bpf_prog_ret0_warn when jit fails" returns error when
jit_requested = 1 but jit fails
This change restores interpreter fallback capability for BPF programs with
stack size <= 512 bytes when jit fails.
Reported-by: Felix Fietkau <nbd@nbd.name> Closes: https://lore.kernel.org/bpf/2e267b4b-0540-45d8-9310-e127bf95fc63@nbd.name/ Fixes: 6ebc5030e0c5 ("bpf: Fix array bounds error with may_goto") Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20250909144614.2991253-1-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanislav reported that in bpf_crypto_crypt() the destination dynptr's
size is not validated to be at least as large as the source dynptr's
size before calling into the crypto backend with 'len = src_len'. This
can result in an OOB write when the destination is smaller than the
source.
Concretely, in mentioned function, psrc and pdst are both linear
buffers fetched from each dynptr:
The crypto backend expects pdst to be large enough with a src_len length
that can be written. Add an additional src_len > dst_len check and bail
out if it's the case. Note that these kfuncs are accessible under root
privileges only.
Fixes: 3e1c6f35409f ("bpf: make common crypto API for TC/XDP programs") Reported-by: Stanislav Fort <disclosure@aisle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20250829143657.318524-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Deny all sampling event by the CPUMF counter facility device driver
and return -ENOENT. This return value is used to try other PMUs.
Up to now events for type PERF_TYPE_HARDWARE were not tested for
sampling and returned later on -EOPNOTSUPP. This ends the search
for alternative PMUs. Change that behavior and try other PMUs
instead.
Fixes: 613a41b0d16e ("s390/cpum_cf: Reject request for sampling in event initialization") Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Each PAI PMU device driver returns -EINVAL when an event is out of
its accepted range. This return value aborts the search for an
alternative PMU device driver to handle this event.
Change the return value to -ENOENT. This return value is used to
try other PMUs instead. This makes the PMUs more robust when
the sequence of PMU device driver initialization changes (at boot time)
or by using modules.
Fixes: 39d62336f5c12 ("s390/pai: add support for cryptography counters") Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We can reproduce the warning by following the steps below:
1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid
and register sched_switch tracepoint.
2. echo ' ' >> set_event_pid, and perform fault injection during chunk
allocation of trace_pid_list_alloc. Let pid_list with no pid and
assign to tr->filtered_pids.
3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to
tr->filtered_pids.
4. echo 9 >> set_event_pid, will trigger the double register
sched_switch tracepoint warning.
The reason is that syzkaller injects a fault into the chunk allocation
in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which
may trigger double register of the same tracepoint. This only occurs
when the system is about to crash, but to suppress this warning, let's
add failure handling logic to trace_pid_list_set.
Link: https://lore.kernel.org/20250908024658.2390398-1-pulehui@huaweicloud.com Fixes: 8d6e90983ade ("tracing: Create a sparse bitmask for pid filtering") Reported-by: syzbot+161412ccaeff20ce4dde@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67cb890e.050a0220.d8275.022e.GAE@google.com Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Typo in ff_lseg_match_mirrors makes the diff ineffective. This results
in merge happening all the time. Merge happening all the time is
problematic because it marks lsegs invalid. Marking lsegs invalid
causes all outstanding IO to get restarted with EAGAIN and connections
to get closed.
Closing connections constantly triggers race conditions in the RDMA
implementation...
Fixes: 660d1eb22301c ("pNFS/flexfile: Don't merge layout segments if the mirrors don't match") Signed-off-by: Jonathan Curley <jcurley@purestorage.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that all O_DIRECT reads and writes are complete, and prevent the
initiation of new i/o until the setattr operation that will truncate the
file is complete.
Fixes: a5864c999de6 ("NFS: Do not serialise O_DIRECT reads and writes") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This allows killing processes that wait for a lock when one process is
stuck waiting for the NFS server. This aims to complete the coverage
of NFS operations being killable, like nfs_direct_wait() does, for
example.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 9eb90f435415 ("NFS: Serialise O_DIRECT i/o and truncate()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Otherwise if the nfsd filecache code releases the nfsd_file
immediately, it can trigger the BUG_ON(cred == current->cred) in
__put_cred() when it puts the nfsd_file->nf_file->f-cred.
Fixes: b9f5dd57f4a5 ("nfs/localio: use dedicated workqueues for filesystem read and write") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20250807164938.2395136-1-smayhew@redhat.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit simply adds the required O_DIRECT plumbing. It doesn't
address the fact that NFS doesn't ensure all writes are page aligned
(nor device logical block size aligned as required by O_DIRECT).
Because NFS will read-modify-write for IO that isn't aligned, LOCALIO
will not use O_DIRECT semantics by default if/when an application
requests the use of O_DIRECT. Allow the use of O_DIRECT semantics by:
1: Adding a flag to the nfs_pgio_header struct to allow the NFS
O_DIRECT layer to signal that O_DIRECT was used by the application
2: Adding a 'localio_O_DIRECT_semantics' NFS module parameter that
when enabled will cause LOCALIO to use O_DIRECT semantics (this may
cause IO to fail if applications do not properly align their IO).
This commit is derived from code developed by Weston Andros Adamson.
Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: 992203a1fba5 ("nfs/localio: restore creds before releasing pageio data") Signed-off-by: Sasha Levin <sashal@kernel.org>
Both tracing_mark_write and tracing_mark_raw_write call
__copy_from_user_inatomic during preempt_disable. But in some case,
__copy_from_user_inatomic may trigger page fault, and will call schedule()
subtly. And if a task is migrated to other cpu, the following warning will
be trigger:
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
An example can illustrate this issue:
process flow CPU
---------------------------------------------------------------------
_nfs4_server_capabilities() is expected to clear any flags that are not
supported by the server.
Fixes: 8a59bb93b7e3 ("NFSv4 store server support for fs_location attribute") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit edede7a6dcd7 ("trace/fgraph: Fix the warning caused by missing
unregister notifier") added a call to unregister the PM notifier if
register_ftrace_graph() failed. It does so unconditionally. However,
the PM notifier is only registered with the first call to
register_ftrace_graph(). If the first registration was successful and
a subsequent registration failed, the notifier is now unregistered even
if ftrace graphs are still registered.
Fix the problem by only unregistering the PM notifier during error handling
if there are no active fgraph registrations.
Fixes: edede7a6dcd7 ("trace/fgraph: Fix the warning caused by missing unregister notifier") Closes: https://lore.kernel.org/all/63b0ba5a-a928-438e-84f9-93028dd72e54@roeck-us.net/ Cc: Ye Weihua <yeweihua4@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250906050618.2634078-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't clear the capabilities that are not going to get reset by the call
to _nfs4_server_capabilities().
Reported-by: Scott Haiden <scott.b.haiden@gmail.com> Fixes: b01f21cacde9 ("NFS: Fix the setting of capabilities when automounting a new filesystem") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
xs_sock_recv_cmsg was failing to call xs_sock_process_cmsg for any cmsg
type other than TLS_RECORD_TYPE_ALERT (TLS_RECORD_TYPE_DATA, and other
values not handled.) Based on my reading of the previous commit
(cc5d5908: sunrpc: fix client side handling of tls alerts), it looks
like only iov_iter_revert should be conditional on TLS_RECORD_TYPE_ALERT
(but that other cmsg types should still call xs_sock_process_cmsg). On
my machine, I was unable to connect (over mtls) to an NFS share hosted
on FreeBSD. With this patch applied, I am able to mount the share again.
Fixes: cc5d59081fa2 ("sunrpc: fix client side handling of tls alerts") Signed-off-by: Justin Worrell <jworrell@gmail.com> Reviewed-and-tested-by: Scott Mayhew <smayhew@redhat.com> Link: https://lore.kernel.org/r/20250904211038.12874-3-jworrell@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent commit f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS
errors") has changed the error return type of ff_layout_choose_ds_for_read() from
NULL to an error pointer. However, not all code paths have been updated
to match the change. Thus, some non-NULL checks will accept error pointers
as a valid return value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors") Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 0a6e7b06bdbe ("drm/amdgpu: Remove JPEG from vega and carrizo video caps") Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0f4dfe86fe922c37bcec99dce80a15b4d5d4726d) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
ASUS VivoBook X515UA with PCI SSID 1043:106f had a default quirk
pickup via pin table that applies ALC256_FIXUP_ASUS_MIC, but this adds
a bogus built-in mic pin 0x13 enabled. This was no big problem
because the pin 0x13 was assigned as the secondary mic, but the recent
fix made the entries sorted, hence this bogus pin appeared now as the
primary input and it broke.
For fixing the bug, put the right quirk entry for this device pointing
to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.
The function amdgpu_dm_crtc_mem_type_changed was dereferencing pointers
returned by drm_atomic_get_plane_state without checking for errors. This
could lead to undefined behavior if the function returns an error pointer.
This commit adds checks using IS_ERR to ensure that new_plane_state and
old_plane_state are valid before dereferencing them.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:11486 amdgpu_dm_crtc_mem_type_changed()
error: 'new_plane_state' dereferencing possible ERR_PTR()
Fixes: 4caacd1671b7 ("drm/amd/display: Do not elevate mem_type change to full update") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b3ba)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
This patch addresses an issue where some files in case-insensitive
directories become inaccessible due to changes in how the kernel
function, utf8_casefold(), generates case-folded strings from the
commit 5c26d2f1d3f5 ("unicode: Don't special case ignorable code
points").
There are good reasons why this change should be made; it's actually
quite stupid that Unicode seems to think that the characters ❤ and ❤️
should be casefolded. Unfortimately because of the backwards
compatibility issue, this commit was reverted in 231825b2e1ff.
This problem is addressed by instituting a brute-force linear fallback
if a lookup fails on case-folded directory, which does result in a
performance hit when looking up files affected by the changing how
thekernel treats ignorable Uniode characters, or when attempting to
look up non-existent file names. So this fallback can be disabled by
setting an encoding flag if in the future, the system administrator or
the manufacturer of a mobile handset or tablet can be sure that there
was no opportunity for a kernel to insert file names with incompatible
encodings.
Fixes: 5c26d2f1d3f5 ("unicode: Don't special case ignorable code points") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
We cannot use vmap_pfn() in vmap_udmabuf() as it would fail the pfn_valid()
check in vmap_pfn_apply(). This is because vmap_pfn() is intended to be
used for mapping non-struct-page memory such as PCIe BARs. Since, udmabuf
mostly works with pages/folios backed by shmem/hugetlbfs/THP, vmap_pfn()
is not the right tool or API to invoke for implementing vmap.
Offset into the page should also be considered while calculating a physical
address for struct dma_debug_entry. page_to_phys() just shifts the value
PAGE_SHIFT bits to the left so offset part is zero-filled.
An example (wrong) debug assertion failure with CONFIG_DMA_API_DEBUG
enabled which is observed during systemd boot process after recent
dma-debug changes:
Found by Linux Verification Center (linuxtesting.org).
Fixes: 9d4f645a1fd4 ("dma-debug: store a phys_addr_t in struct dma_debug_entry") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
[hch: added a little helper to clean up the code] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce and use {pgd,p4d}_populate_kernel() in core MM code when
populating PGD and P4D entries for the kernel address space. These
helpers ensure proper synchronization of page tables when updating the
kernel portion of top-level page tables.
Until now, the kernel has relied on each architecture to handle
synchronization of top-level page tables in an ad-hoc manner. For
example, see commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct
mapping and vmemmap mapping changes").
However, this approach has proven fragile for following reasons:
1) It is easy to forget to perform the necessary page table
synchronization when introducing new changes.
For instance, commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory
savings for compound devmaps") overlooked the need to synchronize
page tables for the vmemmap area.
2) It is also easy to overlook that the vmemmap and direct mapping areas
must not be accessed before explicit page table synchronization.
For example, commit 8d400913c231 ("x86/vmemmap: handle unpopulated
sub-pmd ranges")) caused crashes by accessing the vmemmap area
before calling sync_global_pgds().
To address this, as suggested by Dave Hansen, introduce _kernel() variants
of the page table population helpers, which invoke architecture-specific
hooks to properly synchronize page tables. These are introduced in a new
header file, include/linux/pgalloc.h, so they can be called from common
code.
They reuse existing infrastructure for vmalloc and ioremap.
Synchronization requirements are determined by ARCH_PAGE_TABLE_SYNC_MASK,
and the actual synchronization is performed by
arch_sync_kernel_mappings().
This change currently targets only x86_64, so only PGD and P4D level
helpers are introduced. Currently, these helpers are no-ops since no
architecture sets PGTBL_{PGD,P4D}_MODIFIED in ARCH_PAGE_TABLE_SYNC_MASK.
In theory, PUD and PMD level helpers can be added later if needed by other
architectures. For now, 32-bit architectures (x86-32 and arm) only handle
PGTBL_PMD_MODIFIED, so p*d_populate_kernel() will never affect them unless
we introduce a PMD level helper.
[harry.yoo@oracle.com: fix KASAN build error due to p*d_populate_kernel()] Link: https://lkml.kernel.org/r/20250822020727.202749-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250818020206.4517-3-harry.yoo@oracle.com Fixes: 8d400913c231 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: bibo mao <maobibo@loongson.cn> Cc: Borislav Betkov <bp@alien8.de> Cc: Christoph Lameter (Ampere) <cl@gentwo.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adjust context ] Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when firmware failure occurs during matcher disconnect flow,
the error flow of the function reconnects the matcher back and returns
an error, which continues running the calling function and eventually
frees the matcher that is being disconnected.
This leads to a case where we have a freed matcher on the matchers list,
which in turn leads to use-after-free and eventual crash.
This patch fixes that by not trying to reconnect the matcher back when
some FW command fails during disconnect.
Note that we're dealing here with FW error. We can't overcome this
problem. This might lead to bad steering state (e.g. wrong connection
between matchers), and will also lead to resource leakage, as it is
the case with any other error handling during resource destruction.
However, the goal here is to allow the driver to continue and not crash
the machine with use-after-free error.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250102181415.1477316-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jan Alexander Preissler <akendo@akendo.eu> Signed-off-by: Sujana Subramaniam <sujana.subramaniam@sap.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As discussed in [1], there is no need to enforce dma mapping check on
noncoherent allocations, a simple test on the returned CPU address is
good enough.
Add a new pair of debug helpers and use them for noncoherent alloc/free
to fix this issue.
It can be surprising to the user if DMA functions are only traced on
success. On failure, it can be unclear what the source of the problem
is. Fix this by tracing all functions even when they fail. Cases where
we BUG/WARN are skipped, since those should be sufficiently noisy
already.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations") Signed-off-by: Sasha Levin <sashal@kernel.org>
In some cases, we use trace_dma_map to trace dma_alloc* functions. This
generally follows dma_debug. However, this does not record all of the
relevant information for allocations, such as GFP flags. Create new
dma_alloc tracepoints for these functions. Note that while
dma_alloc_noncontiguous may allocate discontiguous pages (from the CPU's
point of view), the device will only see one contiguous mapping.
Therefore, we just need to trace dma_addr and size.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations") Signed-off-by: Sasha Levin <sashal@kernel.org>
In preparation for using these tracepoints in a few more places, trace
the DMA direction as well. For coherent allocations this is always
bidirectional.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations") Signed-off-by: Sasha Levin <sashal@kernel.org>
dma-debug goes to great length to split incoming physical addresses into
a PFN and offset to store them in struct dma_debug_entry, just to
recombine those for all meaningful uses. Just store a phys_addr_t
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 7e2368a21741 ("dma-debug: don't enforce dma mapping check on noncoherent allocations") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 620c266f39493 ("fhandle: relax open_by_handle_at() permission
checks") relaxed the coditions for decoding a file handle from non init
userns.
The conditions are that that decoded dentry is accessible from the user
provided mountfd (or to fs root) and that all the ancestors along the
path have a valid id mapping in the userns.
These conditions are intentionally more strict than the condition that
the decoded dentry should be "lookable" by path from the mountfd.
For example, the path /home/amir/dir/subdir is lookable by path from
unpriv userns of user amir, because /home perms is 755, but the owner of
/home does not have a valid id mapping in unpriv userns of user amir.
The current code did not check that the decoded dentry itself has a
valid id mapping in the userns. There is no security risk in that,
because that final open still performs the needed permission checks,
but this is inconsistent with the checks performed on the ancestors,
so the behavior can be a bit confusing.
Add the check for the decoded dentry itself, so that the entire path,
including the last component has a valid id mapping in the userns.
Cross-thread attacks are generally harder as they require the victim to be
co-located on a core. However, with VMSCAPE the adversary targets belong to
the same guest execution, that are more likely to get co-located. In
particular, a thread that is currently executing userspace hypervisor
(after the IBPB) may still be targeted by a guest execution from a sibling
thread.
Issue a warning about the potential risk, except when:
- SMT is disabled
- STIBP is enabled system-wide
- Intel eIBRS is enabled (which implies STIBP protection)
cpu_bugs_smt_update() uses global variables from different mitigations. For
SMT updates it can't currently use vmscape_mitigation that is defined after
it.
Since cpu_bugs_smt_update() depends on many other mitigations, move it
after all mitigations are defined. With that, it can use vmscape_mitigation
in a moment.
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
projects / thirdparty / kernel / stable.git / log
