logind: refuse overriding idle hint on tty sessions
Previously we'd allow marking TTY sessions as idle, but when the user
tried to unmark it as idle again it we'd just revert to automatic TTY
atime idle detection, thus making it impossible to mark the session as
non-idle, unless its TTY is atime-touched all the time. But of course,
marking a session as idle is pretty much fatal if you never can mark it
as non-idle again.
This change is triggred by bug reports such as this:
https://github.com/systemd/systemd/issues/14053
With this patch we will now output a clean, clear error message if a
client tries to manipulate the idle state of a non-graphical session.
This means we now have clear rules: "manual" idle logic for graphical
sessions, and TTY based ones for all others that have a TTY of some
form.
I considered allowing the idle state to be overriden both ways for tty
sessions but that's problematic: for sessions that are temporarily
upgraded from tty to graphical and thus suddenly want to manage their
own idle state we'd need to a way to detect when the upgrade goes away
and thus we should revert to old behaviour. Without reverting to the
previous TTY idle auto-magic we'd otherwise be stuck in an eternally
idle or eternally non-idle state, with really bad effects in case
auto-suspend is used. Thus, let's instead generate a proper error
message, saying clearly we don't support it.
(Also includes some other fixes and clean-ups in related code)
Jun'ichi Nomura [Tue, 3 Dec 2019 07:52:02 +0000 (16:52 +0900)]
mount: mark an existing "mounting" unit from /proc/self/mountinfo as "just_mounted"
When starting a mount unit, systemd invokes mount command and moves the
unit's internal state to "mounting". Then it watches for updates of
/proc/self/mountinfo. When the expected mount entry newly appears in
mountinfo, the unit internal state is changed to "mounting-done".
Finally, when systemd finds the mount command has finished, it checks
whether the unit internal state is "mounting-done" and changes the state
to "mounted".
If the state was not "mounting-done" in the last step though mount command
was successfully finished, the unit is marked as "failed" with following
log messages:
Mount process finished, but there is no mount.
Failed with result 'protocol'.
If daemon-reload is done in parallel with starting mount unit, it is
possible that things happen in following order and result in above failure.
1. the mount unit state changes to "mounting"
2. daemon-reload saves the unit state
3. kernel completes the mount and /proc/self/mountinfo is updated
4. daemon-reload restores the saved unit state, that is "mounting"
5. systemd notices the mount command has finished but the unit state
is still "mounting" though it should be "mounting-done"
mount_setup_existing_unit() should take into account that MOUNT_MOUNTING
is transitional state and set MOUNT_PROC_JUST_MOUNTED flag if the unit
comes from /proc/self/mountinfo so that mount_process_proc_self_mountinfo()
later can make state transition from "mounting" to "mounting-done".
docs: drop "The" in categorization titles of Markdown documentation
I think it makes sense to keep the "The" in place for the actual page's
title, but let's drop it from the categorization header, to make it
easier to find stuff, as the "The" isn't helpful to that.
In particular as we sometimes do it this and sometimes the other way so
far, hence let's stick to one common rule.
Zeyu DONG [Fri, 10 Jan 2020 12:11:48 +0000 (20:11 +0800)]
hwdb: Entry for Lenovo Ideapad 310S-14ISK Alps Touchpad
Add the resolution and range information for Lenovo Ideapad 310S-14ISK Alps touchpad. It provides information for the test case of libinput for Alps devices.
Primarily, use the new multi-line support in table formatting.
Also, stream-line naming of the "max-addresses" options. We used three
names for the concept internall, let's just unify on the name we use for
this for external users, i.e. "max-addresses".
In the wiki, this was a separate page. I don't think this split is useful,
since the information about what is stable and what not seems randomly split
between the two pages.
Links are adjusted for our own pages. Some external links to gentoo and other
projects seem to be broken, but it's a chore to fix them.
docs/stability: relax the stance on accepting patches a bit
Instead of saying that patches for portability are not accepted, say that this
is decided case-by-case. This is what happens in practice, and we tend to
discuss each patch on its own merits.
Some sentences are reworded a bit where they sound awkward.
util-lib: move things that parse ifnames to shared/
In subsequent commits, calls to if_nametoindex() will be replaced by a wrapper
that falls back to alternative name resolution over netlink. netlink support
requires libsystemd (for sd-netlink), and we don't want to add any functions
that require netlink in basic/. So stuff that calls if_nametoindex() for user
supplied interface names, and everything that depends on that, needs to be
moved.
tree-wide: make parse_ifindex simply return the index
We don't need a seperate output parameter that is of type int. glibc() says
that the type is "unsigned", but the kernel thinks it's "int". And the
"alternative names" interface also uses ints. So let's standarize on ints,
since it's clearly not realisitic to have interface numbers in the upper half
of unsigned int range.
core,install: allow one more case of "instance propagation"
If we have a template unit template@.service, it should be allowed to specify a
dependency on a unit without an instance, bar@.service. When the unit is created,
the instance will be propagated into the target, so template@inst.service will
depend on bar@inst.service.
This commit changes unit_dependency_name_compatible(), which makes the manager
accept links like that, and unit_file_verify_alias(), so that the installation
function will agree to create a symlink like that, and finally the tests are
adjusted to pass.
This mostly reuses existing checkers used by pid1, so handling of aliases
should be consistent. Hopefully, with the test it'll be clearer what it
happening.
Support for .wants/.requires "aliases" is restored. Those are still used in the
wild quite a bit, so we need to support them.
See https://github.com/systemd/systemd/pull/13119 for a discussion of aliases
with an instance that point to a different template: this is allowed.
Kevin Kuehler [Sun, 8 Dec 2019 23:23:27 +0000 (15:23 -0800)]
systemctl: Add --with-dependencies flag
Will print a unit and all of its dependencies. Works with cat, status,
list-units, and list-unit-files. This flag can also be used in conjunction
with --reverse, --before, and --after.
We also vastly simplify the list_dependencies_get_dependencies logic.
Instead of using 5 strvs and merging them into one, use one strv and
have the bus append all the map values to it.
Dan Streetman [Wed, 8 Jan 2020 12:28:29 +0000 (07:28 -0500)]
test-network: convert wait_operstate() to recheck condition for timeout seconds
Failing after a single check leads to extra sleeps scattered through
test cases, and can also lead to false failures. Instead perform a
recheck for a number of seconds until the state matches, and fail only
if the timeout is exceeded.
This allows removing all the manual sleeps in the testcases.
Dan Streetman [Mon, 6 Jan 2020 21:35:28 +0000 (16:35 -0500)]
network: drop foreign config after addr_gen_mode has been set
Interfaces may come up at any time, even during our initialization of
them, for various reasons; e.g. the kernel will raise VLAN when its
parent is raised; or we will raise an interface if configured with
BindCarrier and its associated interfaces come up.
When LinkLocalAddressing has been disabled for ipv6, we disable
addr_gen_mode in the kernel, so it will not automatically create a
ipv6ll address when the interface is raised. However, we currently
drop all foreign addresses before disabling addr_gen_mode.
If the link has been up for a long time, then its kernel-created ipv6ll
address will be correctly dropped. If the link is down, and stays
down until we raise it after finishing configuration, the addr_gen_mode
setting will be disabled when the interface is raised and the kernel
will not create any ipv6ll address.
However, if the interface is raised after dropping foreign config,
but before we have disabled addr_gen_mode, the kernel will create a
ipv6ll tentative address that will eventually finish DAD and become a
working ipv6ll address, even though we have been configured to disable
ipv6ll.
Moving our call to drop foreign addresses to after we have successfully
set addr_gen_mode closes this window; after we disable addr_gen_mode,
we can safely remove foreign ipv6ll addresses (including tentative ones)
and be sure that the kernel will not create any more.
Dan Streetman [Sat, 4 Jan 2020 23:41:18 +0000 (18:41 -0500)]
network: if ipv6ll is disabled, enumerate tentative ipv6 addrs before dropping foreign addrs
The kernel will create an ipv6ll tentative address immediately when an
interface is raised if addr_gen_mode is not disabled; and, the kernel does
not notify netlink listeners about any tentative addresses. So it's
possible for an interface to contain tentative ipv6 link-local address(es)
that networkd doesn't know about when all foreign addresses are dropped.
In this case, networkd is later notified about the new ipv6ll address(es)
after they finish DAD and are no longer tentative; but since that's after
networkd has already dropped foreign addresses, they are incorrectly left
on the interface.
Dan Streetman [Thu, 19 Dec 2019 18:17:45 +0000 (13:17 -0500)]
network: add link->setting_genmode flag
Similar to the link->setting_mtu flag, this delays continued configuration
until after the genmode has been successfully set; this is important
because we do not want networkd to raise the interface before the genmode
has been set, as if we're disabling the genmode, raising the interface
before we have successfully disabled the genmode will result in the kernel
creating a ipv6ll address, even though we don't want that.
projects / thirdparty / systemd.git / log
