packit: drop the 'sources' file after cloning the Fedora repo
Otherwise rebase-helper thinks we're are a dist-git repository,
replacing the generated git archive with PR changes with the tarball
found in the 'sources' file.
There are two ambiguity in the original description:
1. It will delay all RUN instructions, include builtin.
2. It will delay before running RUN, not each of RUN{program} instructions.
The test occasionally fails as the umount is not yet completed when
cryptsetup close is invoked.
Both cryptsetup and losetup have supported deferred cleanup for some
time now, so use it instead to avoid races.
++ losetup -P --show --find /tmp/test-repart.dMOfYQ8UUF/zzz
+ LOOP=/dev/loop6
+ VOLUME=test-repart-11882
+ touch /tmp/test-repart.dMOfYQ8UUF/empty-password
+ cryptsetup open --type=luks2 --key-file=/tmp/test-repart.dMOfYQ8UUF/empty*** test-repart-11882
+ mkdir /tmp/test-repart.dMOfYQ8UUF/mount
+ mount -t ext4 /dev/mapper/test-repart-11882 /tmp/test-repart.dMOfYQ8UUF/mount
+ diff -r /tmp/test-repart.dMOfYQ8UUF/mount/def /tmp/test-repart.dMOfYQ8UUF/definitions
+ umount /tmp/test-repart.dMOfYQ8UUF/mount
+ cryptsetup close test-repart-11882
Device test-repart-11882 is still in use.
+ rm -rf /tmp/test-repart.dMOfYQ8UUF
Julia Kartseva [Wed, 9 Dec 2020 06:07:30 +0000 (22:07 -0800)]
dbus-cgroup: add BPFProgram= dbus support
- Handle BPFProgram= property in string format
"<bpf_attach_type>:<bpffs_path>", e.g. egress:/sys/fs/bpf/egress-hook.
- Add dbus getter to list foreign bpf programs attached to a cgroup.
Julia Kartseva [Wed, 4 Sep 2019 02:08:13 +0000 (19:08 -0700)]
tests: add unit file tests for BPFProgram=
- Pin trivial bpf programs to bpf filesystem, compose BPFProgram= option
string and pass it to a unit. Programs store `0` in r0 BPF register for
denying action, e.g. drop a packet.
- Load trivial BPF programs
- Test is skipped if not run under root or if can not lock enough
memory.
- For egress and ingress hooks, test BPFProgram= option along with
with IP{Egress|Ingress}FilterPath=, expected result should not depend on
which rule is executed first.
Expected results for BPF_CGROUP_INET_INGRESS:
5 packets transmitted, 0 received, 100% packet loss, time 89ms
For BPF_CGROUP_INET_SOCK_CREATE:
ping: socket: Operation not permitted
Julia Kartseva [Wed, 16 Sep 2020 22:58:04 +0000 (15:58 -0700)]
core: add bpf-foreign unit helpers
- Introduce support of cgroup-bpf programs managed (i.e. compiled,
loaded to and unloaded from kernel) externally. Systemd is only
responsible for attaching programs to unit cgroup hence the name
'foreign'.
Foreign BPF programs are identified by bpf program ID and attach type.
systemd:
- Gets kernel FD of BPF program;
- Makes a unique identifier of BPF program from BPF attach type and
program ID. Same program IDs mean the same program, i.e the same
chunk of kernel memory. Even if the same program is passed multiple
times, identical (program_id, attach_type) instances are collapsed
into one;
- Attaches programs to unit cgroup.
Julia Kartseva [Tue, 2 Mar 2021 00:56:04 +0000 (16:56 -0800)]
cgroup: add foreign program to cgroup context
- Store foreign bpf programs in cgroup context. A program is considered
foreign if it was loaded to a kernel by an entity external to systemd,
so systemd is responsible only for attach and detach paths.
- Support the case of pinned bpf programs: pinning to bpffs so a program
is kept loaded to the kernel even when program fd is closed by a user
application is a common way to extend program's lifetime.
- Aadd linked list node struct with attach type and bpffs path
fields.
Julia Kartseva [Thu, 4 Feb 2021 08:02:07 +0000 (00:02 -0800)]
shared: bpf_attach_type {from,to} string
Introduce bpf_cgroup_attach_type_table with accustomed attached type
names also used in bpftool.
Add bpf_cgroup_attach_type_{from|to}_string helpers to convert from|to
string representation of pinned bpf program, e.g.
"egress:/sys/fs/bpf/egress-hook" for
/sys/fs/bpf/egress-hook path and BPF_CGROUP_INET_EGRESS attach type.
Julia Kartseva [Wed, 16 Sep 2020 22:58:04 +0000 (15:58 -0700)]
shared: add bpf-program helpers
Add helpers to:
- Create new BPFProgram instance from a path in bpf
filesystem and bpf attach type;
- Pin a program to bpf fs;
- Get BPF program ID by BPF program FD.
We were grepping for 'hello world', and in the namespace we would
match on 'hello world', and outside, on 'echo "hello world"'. When
the condition check was fixed, the test gave a false positive.
We were invoking 'systemd-run bash', but the test invoked by bash
was not effective. When the result of that check is propagated, the
outer command fails.
tmpfiles: make handling of existing-but-different targets more consistent
create_fifo() was added in a2fc2f8dd30c17ad1e23a31fc6ff2aeba4c6fa27, and
would always ignore failure. The test was trying to fail in this case, but
we actually don't fail, which seems to be correct. We didn't notice before
because the test was ineffective.
To make things consistent, generally log at warning level, but don't propagate
the error. For symlinks, log at debug level, as before.
For 'e', failure is not propagated now. The test is adjusted to match.
I think warning is appropriate in most cases: we do not expect a device node to
be replaced by a different device node or even a non-device file. This would
most likely be an error somewhere. An exception is made for symlinks, which are
mismatched on purpose, for example /etc/resolv.conf. With this patch, we don't
get any warnings with the any of the 74 tmpfiles.d files, which suggests that
increasing the warning levels will not cause too many unexpected warnings. If
it turns out that there are valid cases where people have expected mismatches
for non-symlink types, we can always decrease the log levels again.
Also add "system" in the messages, because we set the internal value,
and are just skipping the setting of the external value, so the message
could be confusing without that clarification.
We didn't document this behaviour one way or another, so I think it's
OK to change. All callers do the NULL check before callling this to avoid
the assert warning, so it seems reasonable to do it internally.
sd_bus_can_send() is similar, but there we expressly say that an
error is returned on NULL, so I didn't change it.
scsi_id: modernize and use extract_many_words instead of strsep
Also use standard error loggin/return pattern.
Only cursory tested, by checking that with a simple config file
the array is the same before/after. Not tested with actual scsi
rules and devices, due to missing hardware.
Some static analyzers (lgtm) warn against using non-re-entrant functions,
even though at the moment this code is not multi-threaded, just switch to
format_timestamp.
After #19168, #19169, and #19175, there are no warnings with
-Dbuildtype=debug-optimized/-O2 and gcc-11.0.1-0.3.fc34.x86_64. Warnings
are reenabled for -O[23]
-O0 is good for development, and -O2 is the default optimization level for
Fedora package builds. -Os, -O3, -O1, and -Og still generate some warnings. In
fact, with -Os the number of warnings seems completely hopeless. Dozens and
dozens.
home: use goto to make it clear that variables are initialized
gcc-11.0.1-0.3.fc34.x86_64 with -Og was complaining that 'r' might be
unitialized. It cannot, but let's rework the code to use a goto instead of
conditionalizing on 'call' being unset, which I think is clearer and less error
prone. This silences the warning.
timedatectl: rework handling of conditions in print_status_info()
gcc-11.0.1-0.3.fc34.x86_64 was complaining that n might be unset with
--optimization=1. It was wrong, but let's rework the code to make it
obvious that it is always set.
"! test ..." does not cause the script to fail, even with set -e.
IIUC, bash treats this command as part of an expression line, as it
would if 'test ... && ...' was used. Failing expression lines do not
terminate the script.
This fixes the obvious cases by changing '! test' → 'test !'.
Then the inversion happens internally in test and bash will propagate
the failure.
This also makes function id is parsed as uint64_t. Kernel internally
uses uint32_t for function id (see the definition of 'struct zpci_dev),
but it maybe extended in the future.
mkosi: work-around to make systemd build in Fedora images that lack populated /etc
On Fedora /usr/bin/ld is a symlink managed via the "alternatives"
system. This unfortunately means the binary is not usable in
environments where /var or /etc are unpopulated. Let's address this by
redirecting "ld" to "ld.bfd" manually if such an environment is
detected, via $PATH.
This is useful for building systemd in mkosi with UsrOnly=1 set.
projects / thirdparty / systemd.git / log
