bus-dump: change capture output to use pcapng (#21738)
This patch changes busctl capture to generate pcapng format
instead of the legacy pcap format files. It includes basic
meta-data in the file and still uses microsecond time
resolution. In future, more things can be added such as
high resolution timestams, statistics, etc.
PCAP Next Generation capture file format is what tshark uses
and is in process of being standardized in IETF. It is also
readable with libpcap.
$ capinfos /tmp/new.pcapng
File name: /tmp/new.pcapng
File type: Wireshark/... - pcapng
File encapsulation: D-Bus
File timestamp precision: microseconds (6)
Packet size limit: file hdr: (not set)
Packet size limit: inferred: 4096 bytes
Number of packets: 22
File size: 21kB
Data size: 20kB
Capture duration: 0.005694 seconds
First packet time: 2021-12-11 11:57:42.788374
Last packet time: 2021-12-11 11:57:42.794068
Data byte rate: 3,671kBps
Data bit rate: 29Mbps
Average packet size: 950.27 bytes
Average packet rate: 3,863 packets/s
SHA256: b85ed8b094af60c64aa6d9db4a91404e841736d36b9e662d707db9e4096148f1
RIPEMD160: 81f9bac7ec0ec5cd1d55ede136a5c90413894e3a
SHA1: 8400822ef724b934d6000f5b7604b9e6e91be011
Strict time order: True
Capture oper-sys: Linux 5.14.0-0.bpo.2-amd64
Capture application: systemd 250 (250-rc2-33-gdc79ae2+)
Number of interfaces in file: 1
Interface #0 info:
Encapsulation = D-Bus (146 - dbus)
Capture length = 4096
Time precision = microseconds (6)
Time ticks per second = 1000000
Number of stat entries = 0
Number of packets = 22
Frantisek Sumsal [Fri, 24 Dec 2021 10:50:37 +0000 (11:50 +0100)]
ci: test build with supported cryptolibs to some degree
Let's assign a specific -Dcryptolib= value to each job to have at least
some coverage for all supported cryptolibs without unnecessarily
multiplying the test matrix.
Yu Watanabe [Thu, 23 Dec 2021 20:03:16 +0000 (05:03 +0900)]
analyze: fix segfault when malloc() fails (#21874)
Fixes #21872.
log_syntax_callback sets 's', a.k.a. '*userdata', to POINTER_MAX to signal allocation failure.
If the error does not cause immediate failure of the program, and log_syntax_callback is called
again, it would try to use 's' as a pointer to a set and fail badly.
Luca BRUNO [Thu, 23 Dec 2021 12:35:26 +0000 (12:35 +0000)]
factory/locale.conf: mention systemd ownership
This explicitly mentions that comments and empty lines are supported
(and ignored) in /etc/locale.conf. It then adds ownership reference
to the factory default.
Jan Janssen [Tue, 21 Dec 2021 16:10:42 +0000 (17:10 +0100)]
boot: Use correct handle to find TextInputEx protocol
LibLocateProtocol will return the protocol for the first device that
supports it. But it may not actually come from the ConIn device that
we want to use here.
This should be the root cause of what was previously considered just
broken firmware. If you ask the wrong device to return some key, of
course it will never provide one.
This changes the way we handle input yet again in light of this new
knowledge and because using the correct TextInputEx with fallback to
ConIn can actually create double input in some cases.
Since we are now confident that we get the right TextInputEx, we can
use that exclusively, only falling back to ConIn if the console input
device does not support the better interface (the spec is pretty clear
that it must support it, though).
Because some firmware is broken, we still need to provide a fallback
to the previously used TextInputEx thats overrides ConIn/ConInEx if
it is functional.
Luca BRUNO [Thu, 23 Dec 2021 11:01:07 +0000 (11:01 +0000)]
factory: populate /etc/locale.conf with systemd build-time setting
This adds /etc/locale.conf to the set of configuration files
populated by tmpfiles.d factory /etc handling.
In particular, the build-time locale configuration in systemd is
now wired to a /usr factory file, and installed to the system.
On boot, if other locale customization tools did not write
/etc/locale.conf on the system, the factory default file gets
copied to /etc by systemd-tmpfiles.
This is done in order to avoid skews between different system
components when no locale settings are configured. At that point,
systemd can safely act as the fallback owner of /etc/locale.conf.
Yu Watanabe [Thu, 23 Dec 2021 07:49:42 +0000 (16:49 +0900)]
man: reindent and rebreak systemd.network
Also fixes the following:
- IPServiceType= is moved to [DHCPv4] section,
- drop an incorrect sentence in RouteMTUBytes= in [DHCPv4] section.
- drop unnecessary word 'unsigned'.
meson: make it compatible with AFL and honggfuzz again
afl-clang and hufzz-clang try to instrument the code and the
underlying compilers don't like it. It should probably be
fixed in both afl and honggfuzz eventually but until then
let's just use "raw" clang to build bpf-skeletons.
It's a follow-up to https://github.com/systemd/systemd/pull/21607
Yu Watanabe [Wed, 22 Dec 2021 07:52:47 +0000 (16:52 +0900)]
test: wait for user inactive
The user may be busy when auto-rebalancing the user's home device.
Workaround for #21589.
---
Dec 01 15:03:15 H systemd-homework[1078]: Provided password unlocks user record.
Dec 01 15:03:15 H systemd-homework[1078]: Image file '/home/test-user.home' already locked, can't use.
Dec 01 15:03:15 H systemd-homed[240]: Worker reported error code EADDRINUSE.
Dec 01 15:03:15 H systemd-homed[240]: Activation failed: Address already in use
---
Yu Watanabe [Tue, 21 Dec 2021 11:34:23 +0000 (20:34 +0900)]
errno-name: drop aliases defined for specific arch
In kernel's arch/parisc/include/uapi/asm/errno.h, ECANCELLED and
EREFUSED are defined as aliases of ECANCELED and ECONNREFUSED,
respectively. Let's drop them.
Frantisek Sumsal [Tue, 21 Dec 2021 19:45:18 +0000 (20:45 +0100)]
test: tweak TriggerLimitIntervalSec= if we're running w/o KVM as well
since in that case we might be also slow enough to miss the rate-limit
window. However, let's not set the trigger limit unconditionally to
still have coverage for the unaltered path unit (but without sacrificing
CI stability).
nss-resolve: expose various source-disablement settings as variables
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2006761:
> systemd-resolved always (reverse)-resolves the host's IP addresses and FQDN.
> This can be harmful when an application (for instance, a DNS zone manager) is
> installed on the same server instance. That application would expect
> NXDOMAIN to be returned if the current server's IP does not belong in an
> already managed reverse zone.
This allows clients of nss-resolve to use the same config options that are
available through the dbus api and as command-line options to resolvectl.
The comment https://github.com/systemd/systemd/pull/21814#discussion_r771842132
suggests to introduce new helper, but it is used only one place.
Let's not add such, but simply replace the goto with a flag.
Nishal Kulkarni [Fri, 17 Dec 2021 16:36:31 +0000 (22:06 +0530)]
logind: Use new macros
Migrate logind to use the new macros to declare a D-Bus method or signal.
Replaced SD_BUS_METHOD_WITH_NAMES with SD_BUS_METHOD_WITH_ARGS.
Replaced SD_BUS_SIGNAL_WITH_NAMES with SD_BUS_SIGNAL_WITH_ARGS.
Daan De Meyer [Fri, 17 Dec 2021 19:01:31 +0000 (20:01 +0100)]
core: Add trigger limit for path units
When conditions fail on a service unit, a path unit can cause
PID 1 to busy loop as it keeps trying to activate the service unit.
To avoid this from happening, add a trigger limit to the path unit,
identical to the trigger limit we have for socket units.
Initially, let's start with a high limit and not make it configurable.
If needed, we can add properties to configure the rate limit similar
to the ones we have for socket units.
projects / thirdparty / systemd.git / log
