The commit makes several functions skipped if the manager is already
in finished state, as
> In manager_check_finished(), more steps are skipped if MANAGER_IS_FINISHED().
> Those steps are idempotent, but no need to waste cycles trying to do them
> more than once.
However, the idle pipe may be re-opened after manager is finished:
manager_dispatch_run_queue() -> manager_watch_idle_pipe().
So, the closing the pipe is not idempotent here.
Luca Boccassi [Sun, 26 Dec 2021 16:45:13 +0000 (16:45 +0000)]
chrattr-util: return EOPNOTSUPP from chrattr_full if no other failure was observed
When chattr_full tries to apply flags one-by-one, and one fails,
record which errno was returned. But record EOPNOTSUPP(&friends)
only if no other error is observed, and return it only in that case
(otherwise keep returning ENOANO), so that callers can respond
appropriately to EOPNOTSUPP vs more relevant errors.
For example, this lets tmpfiles.d log at debug level when a filesystem
flag cannot be applied because the filesystem does not support it,
but at warning level if something else went wrong when applying it.
Restores logging behaviour of tmpfiles.d to pre-250.
Hans de Goede [Sat, 25 Dec 2021 10:19:03 +0000 (11:19 +0100)]
hwdb: 60-keyboard: Fix volume-button mapping on Asus TF103C
The Asus TF103C misses the home button in its PNP0C40 GPIO resources
causing the button mappings for the volume buttons to be off by one,
leading to the volume-up button sending home button presses and the
volume-down button sending volume-up button presses.
Add a 60-keyboard hwdb entry to correct the mappings. Note this is
split over 2 input devices because the soc_button_array driver
creates separate input devices for power + home and vol up/down.
This is done because power/home act as wakeup buttons where as
the volume buttons do not.
This means that after this fixup the home -> volume-up button
still acts as a wakeup button, there is nothing which can be done
about this without adding a kludge to the kernel which is not
worth the trouble (IMHO).
test: ignore the error about our own libraries missing during image creation
19:50:59 F: Missing a shared library required by /var/tmp/systemd-test.NIPT2q/root/lib/systemd/libsystemd-core-250.so.
19:50:59 F: Run "ldd /var/tmp/systemd-test.NIPT2q/root/lib/systemd/libsystemd-core-250.so" to find out what it is.
19:50:59 F: libsystemd-shared-250.so => not found
19:50:59 F: Cannot create a test image.
meson: allow specifying a custom "tag" for the private shared libaries
We have /usr/lib/systemd/libsystemd-{shared,core}-nnn.so. With this
path the 'nnn' part can be changed to something different. The idea
is that during a package build this will be set to the package version.
This way during in-place upgrades with the same major version both
the new and old libraries can cooexit. This should fix the issue
when systemd programs are called during package upgrades and fail
to exec because the expect different symbols in the library they
are linked to.
This should fix https://bugzilla.redhat.com/show_bug.cgi?id=1906010.
meson: create new libsystemd-core.so private shared library
The scheme is very similar to libsystemd-shared.so: instead of building a
static library, we build a shared library from the same objects and link the
two users to it. Both systemd and systemd-analyze consist mostly of the fairly
big code in libcore, so we save a bit on the installation:
(-0g, no strip)
-rwxr-xr-x 5238864 Dec 14 12:52 /var/tmp/inst1/usr/lib/systemd/systemd
-rwxr-xr-x 5399600 Dec 14 12:52 /var/tmp/inst1/usr/bin/systemd-analyze
-rwxr-xr-x 244912 Dec 14 13:17 /var/tmp/inst2/usr/lib/systemd/systemd
-rwxr-xr-x 461224 Dec 14 13:17 /var/tmp/inst2/usr/bin/systemd-analyze
-rwxr-xr-x 5271568 Dec 14 13:17 /var/tmp/inst2/usr/lib/systemd/libsystemd-core-250.so
(-0g, strip)
-rwxr-xr-x 2522080 Dec 14 13:19 /var/tmp/inst1/usr/lib/systemd/systemd
-rwxr-xr-x 2604160 Dec 14 13:19 /var/tmp/inst1/usr/bin/systemd-analyze
-rwxr-xr-x 113304 Dec 14 13:19 /var/tmp/inst2/usr/lib/systemd/systemd
-rwxr-xr-x 207656 Dec 14 13:19 /var/tmp/inst2/usr/bin/systemd-analyze
-rwxr-xr-x 2648520 Dec 14 13:19 /var/tmp/inst2/usr/lib/systemd/libsystemd-core-250.so
So for systemd itself we grow a bit (2522080 → 2648520+113304=2761824), but
overall we save. The most is saved on all the test files that link to libcore,
if they are installed, because there's 15 of them:
$ du -s /var/tmp/inst?
220096 /var/tmp/inst1
122960 /var/tmp/inst2
I also considered making systemd-analyze a symlink to /usr/lib/systemd/systemd
and turning systemd into a multicall binary. We did something like this with
udevd and udevadm. But that solution doesn't fit well in this case.
systemd-analyze has a bunch of functionality that is not used in systemd,
so the systemd binary would need to grow quite a bit. And we're likely to
add new types of verification or introspection features in analyze, and this
baggage would only grow. In addition, there are the test binaries which also
benefit from this.
bus-dump: change capture output to use pcapng (#21738)
This patch changes busctl capture to generate pcapng format
instead of the legacy pcap format files. It includes basic
meta-data in the file and still uses microsecond time
resolution. In future, more things can be added such as
high resolution timestams, statistics, etc.
PCAP Next Generation capture file format is what tshark uses
and is in process of being standardized in IETF. It is also
readable with libpcap.
$ capinfos /tmp/new.pcapng
File name: /tmp/new.pcapng
File type: Wireshark/... - pcapng
File encapsulation: D-Bus
File timestamp precision: microseconds (6)
Packet size limit: file hdr: (not set)
Packet size limit: inferred: 4096 bytes
Number of packets: 22
File size: 21kB
Data size: 20kB
Capture duration: 0.005694 seconds
First packet time: 2021-12-11 11:57:42.788374
Last packet time: 2021-12-11 11:57:42.794068
Data byte rate: 3,671kBps
Data bit rate: 29Mbps
Average packet size: 950.27 bytes
Average packet rate: 3,863 packets/s
SHA256: b85ed8b094af60c64aa6d9db4a91404e841736d36b9e662d707db9e4096148f1
RIPEMD160: 81f9bac7ec0ec5cd1d55ede136a5c90413894e3a
SHA1: 8400822ef724b934d6000f5b7604b9e6e91be011
Strict time order: True
Capture oper-sys: Linux 5.14.0-0.bpo.2-amd64
Capture application: systemd 250 (250-rc2-33-gdc79ae2+)
Number of interfaces in file: 1
Interface #0 info:
Encapsulation = D-Bus (146 - dbus)
Capture length = 4096
Time precision = microseconds (6)
Time ticks per second = 1000000
Number of stat entries = 0
Number of packets = 22
Frantisek Sumsal [Fri, 24 Dec 2021 10:50:37 +0000 (11:50 +0100)]
ci: test build with supported cryptolibs to some degree
Let's assign a specific -Dcryptolib= value to each job to have at least
some coverage for all supported cryptolibs without unnecessarily
multiplying the test matrix.
Yu Watanabe [Thu, 23 Dec 2021 20:03:16 +0000 (05:03 +0900)]
analyze: fix segfault when malloc() fails (#21874)
Fixes #21872.
log_syntax_callback sets 's', a.k.a. '*userdata', to POINTER_MAX to signal allocation failure.
If the error does not cause immediate failure of the program, and log_syntax_callback is called
again, it would try to use 's' as a pointer to a set and fail badly.
Luca BRUNO [Thu, 23 Dec 2021 12:35:26 +0000 (12:35 +0000)]
factory/locale.conf: mention systemd ownership
This explicitly mentions that comments and empty lines are supported
(and ignored) in /etc/locale.conf. It then adds ownership reference
to the factory default.
Jan Janssen [Tue, 21 Dec 2021 16:10:42 +0000 (17:10 +0100)]
boot: Use correct handle to find TextInputEx protocol
LibLocateProtocol will return the protocol for the first device that
supports it. But it may not actually come from the ConIn device that
we want to use here.
This should be the root cause of what was previously considered just
broken firmware. If you ask the wrong device to return some key, of
course it will never provide one.
This changes the way we handle input yet again in light of this new
knowledge and because using the correct TextInputEx with fallback to
ConIn can actually create double input in some cases.
Since we are now confident that we get the right TextInputEx, we can
use that exclusively, only falling back to ConIn if the console input
device does not support the better interface (the spec is pretty clear
that it must support it, though).
Because some firmware is broken, we still need to provide a fallback
to the previously used TextInputEx thats overrides ConIn/ConInEx if
it is functional.
Luca BRUNO [Thu, 23 Dec 2021 11:01:07 +0000 (11:01 +0000)]
factory: populate /etc/locale.conf with systemd build-time setting
This adds /etc/locale.conf to the set of configuration files
populated by tmpfiles.d factory /etc handling.
In particular, the build-time locale configuration in systemd is
now wired to a /usr factory file, and installed to the system.
On boot, if other locale customization tools did not write
/etc/locale.conf on the system, the factory default file gets
copied to /etc by systemd-tmpfiles.
This is done in order to avoid skews between different system
components when no locale settings are configured. At that point,
systemd can safely act as the fallback owner of /etc/locale.conf.
Yu Watanabe [Thu, 23 Dec 2021 07:49:42 +0000 (16:49 +0900)]
man: reindent and rebreak systemd.network
Also fixes the following:
- IPServiceType= is moved to [DHCPv4] section,
- drop an incorrect sentence in RouteMTUBytes= in [DHCPv4] section.
- drop unnecessary word 'unsigned'.
meson: make it compatible with AFL and honggfuzz again
afl-clang and hufzz-clang try to instrument the code and the
underlying compilers don't like it. It should probably be
fixed in both afl and honggfuzz eventually but until then
let's just use "raw" clang to build bpf-skeletons.
It's a follow-up to https://github.com/systemd/systemd/pull/21607
Yu Watanabe [Wed, 22 Dec 2021 07:52:47 +0000 (16:52 +0900)]
test: wait for user inactive
The user may be busy when auto-rebalancing the user's home device.
Workaround for #21589.
---
Dec 01 15:03:15 H systemd-homework[1078]: Provided password unlocks user record.
Dec 01 15:03:15 H systemd-homework[1078]: Image file '/home/test-user.home' already locked, can't use.
Dec 01 15:03:15 H systemd-homed[240]: Worker reported error code EADDRINUSE.
Dec 01 15:03:15 H systemd-homed[240]: Activation failed: Address already in use
---
Yu Watanabe [Tue, 21 Dec 2021 11:34:23 +0000 (20:34 +0900)]
errno-name: drop aliases defined for specific arch
In kernel's arch/parisc/include/uapi/asm/errno.h, ECANCELLED and
EREFUSED are defined as aliases of ECANCELED and ECONNREFUSED,
respectively. Let's drop them.
Frantisek Sumsal [Tue, 21 Dec 2021 19:45:18 +0000 (20:45 +0100)]
test: tweak TriggerLimitIntervalSec= if we're running w/o KVM as well
since in that case we might be also slow enough to miss the rate-limit
window. However, let's not set the trigger limit unconditionally to
still have coverage for the unaltered path unit (but without sacrificing
CI stability).
projects / thirdparty / systemd.git / log
