Daan De Meyer [Fri, 4 Feb 2022 11:10:33 +0000 (11:10 +0000)]
mkosi: Add centos_epel config
Now that mkosi has centos-stream 9 support, let's add a config in
the repo so that the mkosi CI tests that configuration as well.
Centos doesn't support btrfs so we use xfs instead. For some reason,
building --hostonly-initrd centos images breaks the qemu boot so I
disabled that option for centos.
We update the mkosi commit hash to https://github.com/systemd/mkosi/commit/0dd39c20a4b3a2fab6efdc54da92bffad7c7b7ca
which adds the PowerTools repo to CentOS Stream 8 which is required
to make all the necessary packages required to build systemd on
CentOS Stream 8 available.
If we check now, we can see it has been backported
(https://git.centos.org/rpms/util-linux/blob/c8s/f/SOURCES/0048-libfdisk-count-gaps-to-possible-size-when-resize.patch)
which means we can drop the required version to 2.32 instead of 2.33.
units: move resolved to sysinit.target (from basic.target)
79a67f3ca4d32c37b5e754501852a85eae908a6a pulled systemd-resolved.service
in from basic.target instead of multi-user.target, i.e. the idea is to
make it an early boot service, instead of a regular service.
However, early boot services are supposed to be in sysinit.target, not
basic.target (the latter is just one that combines the early boot
services in sysinit.target, the sockets in sockets.targt, the mounts in
local-fs.target and so on into one big target).
Also, the comit actually didn't add a synchronization point, i.e. not
Before=, so that the whole thing was racy.
Yu Watanabe [Wed, 23 Feb 2022 22:07:02 +0000 (07:07 +0900)]
network: set broadcast address on request
Previously, the broadcast address was set to a Address object in
address_section_verify() (or address_acquire()). But, for wireguard
interfaces, we do not use the broadcast address. The .network file may
be assigned to multiple interfaces, hence, we cannot determine if we
should set the broadcast address in address_section_verify().
This makes the broadcast address set in link_request_address().
Then, we set the broadcast address only when we need it.
The issue #17831, which is fixed by #17851, is handled in a different way;
simply ignore to configure the conflicted DHCPv6 address. Previously, we
warn about the conflict, but continue to configure the address anyway, and
the kernel ignores the request. So, it is not necessary to request the
conflicted address in networkd side.
This fixes the following issues:
- when a link has an address, and corresponding .network file has the
address with different prefix length, then the prefix length specified
in the .network file will not be applied,
- we cannot specify multiple IPv4 addresses with different prefix
length, e.g.
----
Address=10.10.10.10/24
Address=10.10.10.10/16
----
This is spurious setup, but the kernel allows it.
Peter Hutterer [Tue, 22 Feb 2022 23:12:43 +0000 (09:12 +1000)]
udev-builtin-input_id: don't label absolute mice as pointing sticks
The Getac UX10 tablet exposes a "CUST0000:00 0EEF:C002 Mouse" device
with BTN_LEFT/RIGHT and ABS_X/Y on the i2c bus. This causes the builtin
to incorrectly label it as pointing stick (all i2c mice are
tagged as ID_INPUT_POINTING_STICK, see 3d7ac1c655ec4).
Fix this by adding a separate variable for absolute pointing
devices like the VMmouse USB mouse or this Getac tablet - this way we
skip the pointing stick check.
See https://gitlab.freedesktop.org/libinput/libinput/-/issues/743
for recordings.
man/systemd-analyze: split out example to a separate section
It turns out we can't have an Example nested in a list, and every
combination of nesting I tried looked bad either in troff or in html.
The whole example is moved to a separate section.
units: drop After=systemd-networkd.service from systemd-resolved.service
This ordering existed since resolved was first created, but there should
not be any need to order the two services against each other, as
resolved should be able to pick up networkd DNS metadata either way (as
it works with inotify in /run).
Let's drop this hence, and not cargo-cult this to eternity
Also see: https://github.com/systemd/systemd/pull/22389#issuecomment-1045978403
Curtis Klein [Sun, 10 Oct 2021 00:51:09 +0000 (17:51 -0700)]
watchdog: check pretimeout governor
Check and log the default pretimeout governor configured in the kernel.
The pretimeout will not work unless at least one governor is available
and configured. This requires loading a kernel module manually.
Curtis Klein [Sun, 27 Jun 2021 22:36:49 +0000 (15:36 -0700)]
watchdog: Add watchdog pretimeout support
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.
The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
Frantisek Sumsal [Tue, 22 Feb 2022 13:43:40 +0000 (14:43 +0100)]
ci: fix clang-13 installation
For some reason Ubuntu Focal repositories now have `llvm-13` virtual
package which can't be installed, but successfully fools our check,
resulting in no clang/llvm being installed...
```
$ apt show llvm-13
Package: llvm-13
State: not a real package (virtual)
N: Can't select candidate version from package llvm-13 as it has no candidate
N: Can't select versions from package 'llvm-13' as it is purely virtual
N: No packages found
$ apt install --dry-run llvm-13
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package llvm-13 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'llvm-13' has no installation candidate
```
Jan Janssen [Mon, 21 Feb 2022 12:45:06 +0000 (13:45 +0100)]
boot: Handle shift and logo keys too
Some firmware supports sending input events for shift and logo keys.
Previously, we would suppress these with EFI_NOT_READY unless
some other key was pressed alongside, but it is really the job of the
caller to decide how to handle these.
Note that for keys that already have a printable shift representation
the reported input event will not have the shift key bits set
(Shift+a is reported as A). Should some firmware turn out to violate the
spec here we can always remove that part.
Jan Janssen [Mon, 21 Feb 2022 11:52:30 +0000 (12:52 +0100)]
boot: Properly check status code of console_key_read
In some cases there was a unlikely possibility that we would look
at an uninitialized key value.
Also, returning in case of unexpected input error cases should prevent
infinite looping.
Let's split out the inner parts of verb_daemon_reload() as a function
daemon_reload() and then stop using the former outside of the verbs
logic, and instead call the latter whenever we need to reload the daemon
as auxiliary opeation.
This should make our logic more systematic as we don't have to provide
fake or misleading argc/argv to verb_daemon_reload() anymore.
Yu Watanabe [Sun, 20 Feb 2022 02:46:16 +0000 (11:46 +0900)]
network: dhcp-pd: allow to assign the same subnet prefix to multiple interfaces
There is no reason networkd refuses that. Especially, when multiple
downstream interfaces are connected to the same network, it is natural to
assign the same subnet prefix to them.
mostly to make sure that systemd is buildable without some dependencies
but other than that it should make it easier to build it with MSan without
having to compile all the dependencies with MSan.
Franck Bui [Fri, 18 Feb 2022 09:06:24 +0000 (10:06 +0100)]
core: really skip automatic restart when a JOB_STOP job is pending
It's not clear why we rescheduled a service auto restart while a stop job for
the unit was pending. The comment claims that the unit shouldn't be restarted
but the code did reschedule an auto restart meanwhile.
In practice that was rarely an issue because the service waited for the next
auto restart to be rescheduled, letting the queued stop job to be proceed and
service_stop() to be called preventing the next restart to complete.
However when RestartSec=0, the timer expired right away making PID1 to
reschedule the unit again, making the timer expired right away... and so
on. This busy loop prevented PID1 to handle any queued jobs (and hence giving
no chance to the start rate limiting to trigger), which made the busy loop last
forever.
This patch breaks this loop by skipping the reschedule of the unit auto restart
and hence not depending on the value of u->restart_usec anymore.
analyze: systematically name verb entry point functions verb_xyz()
Some of the functions so far were named do_xyz(), others dump_xyz() and
even others test_xyz(). let's instead name them exactly like the verb
exposed in the command line, just prefixed with verb_
analyze: split out "verify" verb into own .c/.h file
This renames the old analyze-verify.[ch] pair →
analyze-verify-util.[ch], because it's used by the test logic as well,
and by keeping it separate from the verify verb logic we don't have to
import the arg_xyz variables.
projects / thirdparty / systemd.git / log
