locale: when no xvariant match select the entry with an empty xvariant
When doing a conversion and the specified 'xc->xvariant' has no match, select
the x11 layout entry with a matching layout and an empty xvariant if such entry
exists. It's still better than no conversion at all.
locale: convert generated vconsole keymap to x11 layout automatically
When doing x11->console conversions, find_converted_keymap() searches
automatically for a candidate in the converted keymap directory for a given x11
layout.
However doing console->x11 conversions, this automatic search is not done hence
simple conversion in this direction can't be achieved without populating
kbd-model-map with entries for converted keymaps.
For example, let's consider "at" layout which is not part of kbd-model-map. The
"at" x11 layout has a generated keymap
"/usr/share/kbd/keymaps/xkb/at.map.gz". If we configure "at" for the x11
layout, localed is able to automatically find the "at" converted vc layout and
the conversion just works :
$ localectl set-x11-keymap at
$ localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: at
X11 Layout: at
However in the opposite direction, ie when setting the vc keymap to "at", no
conversion is done and the x11 layout is not defined:
$ localectl set-keymap at
$ localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: at
X11 Layout: (unset)
This patch fixes this limitation as the implemenation is relatively simple and
it removes the need to populate kbd-model-map with (many) entries for converted
keymaps. However the patch doesn't remove the existing entries in kbd-model-map
which became unneeded after this change to be on the safe side.
Note: by default the automatically generated x11 keyboard configs use keyboard
model "microsoftpro" which should be equivalent to "pc105" model but with the
internet/media key mapping added.
Let's use the new support for matching against any distribution in
a list of distributions to start sharing most things between the
ubuntu/debian configs and centos/fedora configs.
mkosi: Use authselect minimal if authselect is installed
We dropped this logic from mkosi itself, so let's configure it in
our postinst script instead. We also enable the with-homed feature
if we can find it. It doesn't exist for the minimal profile yet,
but might be added in the future.
mkosi: remove ?priority(required) from debian pkg list
Requires apt 2.3.10 which is not available in stable, and also doesn't
seem necessary, same packages are installed anyway
Add tzdata manually, as that doesn't seem to be pulled in via the CI.
This change adds a new tool that gets triggered by a udev rule for any
block device and queries the hwdb for known solutions. The format for
the hwdb file that is currently generated by the github action looks like
this:
# This file was auto-generated on Tue, 23 Aug 2022 13:03:57 +0000.
# From the following commit:
# https://github.com/iocost-benchmark/iocost-benchmarks/commit/ca82acfe93c40f21d3b513c055779f43f1126f88
#
# Match key format:
# block:<devpath>:name:<model name>:
The IOCOST_SOLUTIONS key lists the solutions available for that device
in the preferred order for higher isolation, which is a reasonable
default for most client systems. This can be overriden to choose better
defaults for custom use cases, like the various data center workloads.
The tool can also be used to query the known solutions for a specific
device or to apply a non-default solution (say, isolation or bandwidth).
getty-generator enables serial-getty@.service for virtualizer consoles
that it can find in /sys/class/tty. To make sure this works for
virtio consoles, let's make sure we load the module is loaded early
so that the /sys/class/tty/hvc0 exists before we run getty-generator.
This is the function version of STARTSWITH_SET(). We also move
STARTSWITH_SET() to string-util.h as it fits more there than in
strv.h and reimplement it using startswith_strv().
Let's avoid confusing developers and users when log messages suddenly
stop getting logged to kmsg because of ratelimiting by logging an
additional message if we start ratelimiting log messages to kmsg.
dissect: let's check for crypto_LUKS before fstype allowlist check
When trying to mount a partition that is encrypted without the
encryption first having been set up we want to return a
recognizable error (EUNATCH). This was broken by 80ce8580f5aa6b03fa13a0b3b30207bc9b5c5fe0 which added an allowlist check
for permissible file systems first. Let's reverse the check order, so
that we get EUNATCH again, as before. (And leave EIDRM as error for the
failed allowlist check).
An overflow here (i.e. the counter reaching 2^32 within a ratelimit time
window) is not so unlikely. Let's handle this somewhat sanely
and simply stop counting, while remaining in the "limit is hit" state until
the time window has passed.
man: try to make clearer that /var/ is generally not available in /usr/lib/systemd/system-shutdown/ callouts
I made the mistake to look into what is installed into
/usr/lib/systemd/system-shutdown/ on Fedora. fwdupd among other things
assumes /var/ is available from these callouts, though it is not in the
general case.
Hence, let's emphasize this in the documentation a bit more.
dissect-image: issue BLKFLSBUF before probing an fs at block device offset != 0
See added code comment for a longer explanation. TLDR: Linux maintains
distinct block device caches for partition and "whole" block devices,
and a simply BLKFLSBUF should make the worst confusions this causes go
away.
Robert Meijers [Mon, 17 Apr 2023 20:16:05 +0000 (22:16 +0200)]
networkd: fallback to chaddr for static lease lookup when not found
DHCP static leases are looked up by the client identifier as send by
the client, while configured based on MAC. As RFC 2131 states the client
identifier is an opaque key and must not be interpreted by the server
this means that DHCP clients can (/will) also use a client identifier
which is not a MAC address. One of these clients actually is
systemd-networkd which uses an RFC 4361 by default to generate the
client identifier. For these kind of DHCP clients static leases thus
don't work because of this mismatch between configuring a MAC address
but the server matching based on client identifier. This adds a fallback
to try to look up a configured static lease based on the "chaddr" of the
DHCP message as this will always contain the MAC address of the client.
core/device: rewrite how device unit is removed from Manager.devices_by_sysfs
If the device unit is not the head of the list saved in
Manager.devices_by_sysfs, then it is not necessary to replace the
existing hashmap entry. This should not change any behavior, just
refactoring.
chase: replace path_prefix_root_cwd() with chaseat_prefix_root()
The function path_prefix_root_cwd() was introduced for prefixing the
result from chaseat() with root, but
- it is named slightly generic,
- the logic is different from what chase() does.
This makes the name more explanative and specific for the result of the
chaseat(), and make the logic consistent with chase().
fd-util: skip to check mount ID if kernel is too old and /proc is not mounted
Now, dir_fd_is_root() is heavily used in chaseat(), which is used at
various places. If the kernel is too old and /proc is not mounted, then
there is no way to get the mount ID of a directory. In that case, let's
silently skip the mount ID check.
chase: make chaseat() provides absolute path also when dir_fd points to the root directory
Usually, we pass the file descriptor of the root directory to chaseat()
when `--root=` is not specified. Previously, even in such case, the
result was relative, and we need to prefix the path with "/" when we
want to pass the path to other functions that do not support dir_fd, or
log or show the path. That's inconvenient.
gpt-auto-generator: "translate" errno codes into proper messages
E.g. in logs on jammy-ppc64el in https://github.com/systemd/systemd/pull/27294:
Apr 16 17:42:50 H systemd-gpt-auto-generator[300]: Failed to dissect partition table of block device /dev/sda: No message of desired type
Apr 16 17:42:50 H (sd-execu[295]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
ee0e6e476e61d4baa2a18e241d212753e75003bf made this particular condition not an
error. But for other errnos we want to print a better message too.
dissect_loop_device_and_warn() already does this, but it always prints the
error at error level. We want to suppress some of the errors, so let's make the
print helper public and do the error suppression in the caller.
getty-generator: Use device hotplug to instantiate virtualizer consoles
If getty-generator runs in the initrd, the corresponding tty might not
have been instantiated yet in /dev, which means a serial getty is not
spawned on it. Instead, let's instantiate the serial-getty when the
device appears so that it always gets instantiated.
lsm-util: move detection of support of LSMs into a new lsm-util.[ch] helper
This makes the bpf LSM check generic, so that we can use it elsewhere.
it also drops the caching inside it, given that bpf-lsm code in PID1
will cache it a second time a stack frame further up when it checks for
various other bpf functionality.
Running systemd with IP accounting enabled generates many bpf maps (two
per unit for accounting, another two if IPAddressAllow/Deny are used).
Systemd itself knows which maps belong to what unit and commands like
`systemctl status <unit>` can be used to query what service has which
map, but monitoring these values all the time costs 4 dbus requests
(calling the .IP{E,I}gress{Bytes,Packets} method for each unit) and
makes services like the prometheus systemd_exporter[1] somewhat slow
when doing that for every units, while less precise information could
quickly be obtained by looking directly at the maps.
Unfortunately, bpf map names are rather limited:
- only 15 characters in length (16, but last byte must be 0)
- only allows isalnum(), _ and . characters
If it wasn't for the length limit we could use the normal unit escape
functions but I've opted to just make any forbidden character into
underscores for maximum brievty -- the map prefix is also rather short:
This isn't meant as a precise mapping, but as a hint for admins who want
to look at these.
(Note there is no problem if multiple maps have the same name)
process-util: be more careful with pidfd_get_pid() special cases
Let's be more careful with generating error codes for (expected) error
causes.
This does not introduce new error conditions, it just changes what we
return under specific cases, to make things nicely recognizable in each
case. Most importantly this detects if fdinfo reports a pid of "-1" for
pidfds with processes that are already reaped (and thus have no PID
anymore)
None of our current users care about these error codes, but let's get
this right for the future.
It'll be out this week. We can't update the man pages before it is realeased,
but we can use it for mkosi builds and do some very late testing.
Also, use filepath specification for /bin/pkg-config. We need it for meson, and
meson calls it directly by this path. pkgconfig is a virtual Provides on
pkgconf-pkg-config, and the indirection here just obfuscates things with no
benefit.
Add it explicitly for centos too. (I think it is pulled in by packages which
contain pkg-config modules anyway, but it's better to be explicit).
The cmd(3) man page says about CMSG_DATA():
> The pointer returned cannot be assumed to be suitably aligned for
> accessing arbitrary payload data types. Applications should not cast
> it to a pointer type matching the payload, but should instead use
> memcpy(3) to copy data to or from a suitably declared object.
Hence, if we want to use unaligned data in cmsg, we need to copy it
before use. That's typically important for reading timestamps in
RISCV32, as the time_t is 64bit and size_t is 32bit on the system.
This removes remaining hardcoded occurences of `/sbin/fsck`, and instead
uses `find_executable` to find `fsck`.
We also use `fsck_exists_for_fstype` to check for the `fsck.*`
executable, which also checks in `$PATH`, so it's fair to assume fsck
itself is also available.
projects / thirdparty / systemd.git / log
