OPP: Make dev_pm_opp_set_regulators() accept NULL terminated list
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names
instead of making the callers keep the two parameters in sync, which
creates an opportunity for bugs to get in.
phy: cadence-torrent: Remove unused `regmap` field from state struct
The driver state struct for the sierra PHY driver has a field named
`regmap` that is never referenced. Remove it since it is unused.
Not that there are separate fields of type `struct regmap` for the
individual sections of the device's register map. These other regmaps are
used and not affected by the patch.
phy: cadence: Sierra: Remove unused `regmap` field from state struct
The driver state struct for the sierra PHY driver has a field named
`regmap` that is never referenced. Remove it since it is unused.
Not that there are separate fields of type `struct regmap` for the
individual sections of the device's register map. These other regmaps are
used and not affected by the patch.
Chanho Park [Wed, 6 Jul 2022 02:02:53 +0000 (11:02 +0900)]
phy: samsung-ufs: convert phy clk usage to clk_bulk API
Instead of using separated clock manipulation, this converts the phy
clock usage to be clk_bulk APIs. By using this, we can completely
remove has_symbol_clk check and symbol clk variables.
Furthermore, clk_get should be moved to probe because there is no need
to get them in the phy_init callback.
Jakub Kicinski [Fri, 8 Jul 2022 03:01:53 +0000 (20:01 -0700)]
Merge branch 'polarfire-soc-macb-reset-support'
Conor Dooley says:
====================
PolarFire SoC macb reset support
The Cadence MACBs on PolarFire SoC (MPFS) have reset capability and are
compatible with the zynqmp's init function. I have removed the zynqmp
specific comments from that function & renamed it to reflect what it
does, since it is no longer zynqmp only.
MPFS's MACB had previously used the generic binding, so I also added
the required specific binding.
For v2, I noticed some low hanging cleanup fruit so there are extra
patches added for that:
moving the init function out of the config structs, aligning the
alignment of the zynqmp & default config structs with the other dozen
or so structs & simplifing the error paths to use dev_err_probe().
Feel free to apply as many or as few of those as you like.
====================
net: macb: sort init_reset_optional() with other init()s
init_reset_optional() is somewhat oddly placed amidst the macb_config
struct definitions. Move it to a more reasonable location alongside
the fu540 init functions.
To date, the Microchip PolarFire SoC (MPFS) has been using the
cdns,macb compatible, however the generic device does not have reset
support. Add a new compatible & .data for MPFS to hook into the reset
functionality added for zynqmp support (and make the zynqmp init
function generic in the process).
Until now the PolarFire SoC (MPFS) has been using the generic
"cdns,macb" compatible but has optional reset support. Add a specific
compatible which falls back to the currently used generic binding.
Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with clang we encounter this warning:
| net/l2tp/l2tp_ppp.c:1557:6: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] session->nr, session->ns,
Both session->nr and session->ns are of type u32. The format specifier
previously used is `%hu` which would truncate our unsigned integer from
32 to 16 bits. This doesn't seem like intended behavior, if it is then
perhaps we need to consider suppressing the warning with pragma clauses.
This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.
Pavel Skripkin [Wed, 6 Jul 2022 13:28:45 +0000 (16:28 +0300)]
net: ocelot: fix wrong time_after usage
Accidentally noticed, that this driver is the only user of
while (time_after(jiffies...)).
It looks like typo, because likely this while loop will finish after 1st
iteration, because time_after() returns true when 1st argument _is after_
2nd one.
There is one possible problem with this poll loop: the scheduler could put
the thread to sleep, and it does not get woken up for
OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done
its thing, but you exit the while loop and return -ETIMEDOUT.
Fix it by using sane poll API that avoids all problems described above
Fixes: 753a026cfec1 ("net: ocelot: add FDMA support") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 8 Jul 2022 00:44:45 +0000 (17:44 -0700)]
Merge tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-07-06
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Ring the TX doorbell on DMA errors
net/mlx5e: Fix capability check for updating vnic env counters
net/mlx5e: CT: Use own workqueue instead of mlx5e priv
net/mlx5: Lag, correct get the port select mode str
net/mlx5e: Fix enabling sriov while tc nic rules are offloaded
net/mlx5e: kTLS, Fix build time constant test in RX
net/mlx5e: kTLS, Fix build time constant test in TX
net/mlx5: Lag, decouple FDB selection and shared FDB
net/mlx5: TC, allow offload from uplink to other PF's VF
====================
net: ethernet: ti: am65-cpsw: Fix devlink port register sequence
Renaming interfaces using udevd depends on the interface being registered
before its netdev is registered. Otherwise, udevd reads an empty
phys_port_name value, resulting in the interface not being renamed.
Fix this by registering the interface before registering its netdev
by invoking am65_cpsw_nuss_register_devlink() before invoking
register_netdev() for the interface.
Move the function call to devlink_port_type_eth_set(), invoking it after
register_netdev() is invoked, to ensure that netlink notification for the
port state change is generated after the netdev is completely initialized.
Daniel Latypov [Mon, 27 Jun 2022 22:14:46 +0000 (22:14 +0000)]
kunit: add coverage_uml.config to enable GCOV on UML
Now that kunit.py's --kunitconfig is repeatable, let's create a file to
hold the various options needed to enable coverage under UML.
This can be used like so:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig=tools/testing/kunit/configs/all_tests_uml.config \
--kunitconfig=tools/testing/kunit/configs/coverage_uml.config \
--make_options=CC=/usr/bin/gcc-6
which on my system is enough to get coverage working [1].
This is still a clunky command, but far better than before.
[1] at the time of this commit, I get:
Overall coverage rate:
lines......: 11.6% (34112 of 295033 lines)
functions..: 15.3% (3721 of 24368 functions)
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Jon Hunter [Wed, 6 Jul 2022 08:39:13 +0000 (09:39 +0100)]
net: stmmac: dwc-qos: Disable split header for Tegra194
There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.
Currently, you cannot ovewrwrite what's in your kunitconfig via
--kconfig_add.
Nor can you override something in a qemu_config via either means.
This patch makes it so we have this level of priority
* --kconfig_add
* kunitconfig file (the default or the one from --kunitconfig)
* qemu_config
The rationale for this order is that the more "dynamic" sources of
kconfig options should take priority.
--kconfig_add is obviously the most dynamic.
And for kunitconfig, users probably tweak the file manually or specify
--kunitconfig more often than they delve into qemu_config python files.
And internally, we convert the kconfigs from a python list into a set or
dict fairly often. We should just use a dict internally.
We exposed the set transform in the past since we didn't define __eq__,
so also take the chance to shore up the kunit_kconfig.Kconfig interface.
Example
=======
Let's consider the unrealistic example where someone would want to
disable CONFIG_KUNIT.
I.e. they run
$ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n
Before
------
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: # CONFIG_KUNIT is not set
After
-----
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Jie Wang [Tue, 5 Jul 2022 11:35:15 +0000 (19:35 +0800)]
net: page_pool: optimize page pool page allocation in NUMA scenario
Currently NIC packet receiving performance based on page pool deteriorates
occasionally. To analysis the causes of this problem page allocation stats
are collected. Here are the stats when NIC rx performance deteriorates:
The rx_pp_alloc_waive count indicates that a large number of pages' numa
node are inconsistent with the NIC device numa node. Therefore these pages
can't be reused by the page pool. As a result, many new pages would be
allocated by __page_pool_alloc_pages_slow which is time consuming. This
causes the NIC rx performance fluctuations.
The main reason of huge numa mismatch pages in page pool is that page pool
uses alloc_pages_bulk_array to allocate original pages. This function is
not suitable for page allocation in NUMA scenario. So this patch uses
alloc_pages_bulk_array_node which has a NUMA id input parameter to ensure
the NUMA consistent between NIC device and allocated pages.
Repeated NIC rx performance tests are performed 40 times. NIC rx bandwidth
is higher and more stable compared to the datas above. Here are three test
stats, the rx_pp_alloc_waive count is zero and rx_pp_alloc_slow which
indicates pages allocated from slow patch is relatively low.
Daniel Latypov [Wed, 18 May 2022 17:01:24 +0000 (10:01 -0700)]
kunit: tool: introduce --qemu_args
Example usage:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add=CONFIG_SMP=y --qemu_args='-smp 8'
Looking in the test.log, one can see
> smp: Bringing up secondary CPUs ...
> .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> smp: Brought up 1 node, 8 CPUs
This flag would allow people to make tweaks like this without having to
create custom qemu_config files.
For consistency with --kernel_args, we allow users to repeat this
argument, e.g. you can tack on a --qemu_args='-m 2048', or you could
just append it to the first string ('-smp 8 -m 2048').
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
When using a non-UML arch, kunit.py will boot the test kernel with
options like these by default (this is x86_64):
> mem=1G console=tty kunit_shutdown=halt console=ttyS0 kunit_shutdown=reboot
The first three options are added unconditionally but are only intended
for UML.
1. 'mem=1G' is redundant with the '-m 1024' that we hard-code into the
qemu commandline.
2. We specify a 'console' for all tools/testing/kunit/qemu_configs/*.py
already, so 'console=tty' gets overwritten.
3. For QEMU, we need to use 'reboot', and for UML we need to use 'halt'.
If you switch them, kunit.py will hang until the --timeout expires.
This patch:
Having these duplicate options is a bit noisy.
Switch so we only add UML-specific options for UML.
I.e. we now get
UML: 'mem=1G console=tty kunit_shutdown=halt' (unchanged)
x86_64: 'console=ttyS0 kunit_shutdown=reboot'
Side effect: you can't overwrite these options on UML w/ --kernel_arg.
But you already couldn't for QEMU (console, kunit_shutdown), and why
would you want to?
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Mon, 16 May 2022 19:47:30 +0000 (12:47 -0700)]
kunit: tool: refactoring printing logic into kunit_printer.py
Context:
* kunit_kernel.py is importing kunit_parser.py just to use the
print_with_timestamp() function
* the parser is directly printing to stdout, which will become an issue
if we ever try to run multiple kernels in parallel
This patch introduces a kunit_printer.py file and migrates callers of
kunit_parser.print_with_timestamp() to call
kunit_printer.stdout.print_with_timestamp() instead.
Future changes:
If we want to support showing results for parallel runs, we could then
create new Printer's that don't directly write to stdout and refactor
the code to pass around these Printer objects.
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Mon, 16 May 2022 19:47:29 +0000 (12:47 -0700)]
kunit: tool: redo how we construct and mock LinuxSourceTree
Our main function currently has an optional `linux` argument which is
used to by our unit tests to inject a mock.
We currently have the same code copy-pasted several times to do
if not linux:
linux = MakeRealInstance(cli_args.foo, cli_args.bar, ...)
But in python, dependency injection isn't necessary or idiomatic when we
can just use mock.patch() to mock things out.
This change
1. adds a helper to create a LinuxSourceTree from the cli_args
2. drops the `linux` parameter in favor of mocking the __init__ func.
Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov [Mon, 16 May 2022 16:54:46 +0000 (09:54 -0700)]
kunit: use kmemdup in kunit_filter_tests(), take suite as const
kmemdup() is easier than kmalloc() + memcpy(), per lkp bot.
Also make the input `suite` as const since we're now always making
copies after commit a127b154a8f2 ("kunit: tool: allow filtering test
cases via glob").
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge tag 'nvme-5.19-2022-07-07' of git://git.infradead.org/nvme into block-5.19
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- another bogus identifier quirk (Keith Busch)
- use struct group in the tracer to avoid a gcc warning (Keith Busch)"
* tag 'nvme-5.19-2022-07-07' of git://git.infradead.org/nvme:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
Pavel Begunkov [Thu, 7 Jul 2022 14:00:38 +0000 (15:00 +0100)]
io_uring: explicit sqe padding for ioctl commands
32 bit sqe->cmd_op is an union with 64 bit values. It's always a good
idea to do padding explicitly. Also zero check it in prep, so it can be
used in the future if needed without compatibility concerns.
There is an unexpected word "the" in the comments that needs to be dropped.
file: ./drivers/s390/scsi/zfcp_diag.h
line: 5
* Definitions for handling diagnostics in the the zfcp device driver.
changed to
* Definitions for handling diagnostics in the zfcp device driver.
Link: https://lore.kernel.org/r/20220705083538.15143-1-sh043.lee@samsung.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Junwoo Lee <junwoo80.lee@samsung.com> Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:25 +0000 (14:14 -0700)]
scsi: lpfc: Copyright updates for 14.2.0.5 patches
Update copyrights to 2022 for files modified in the 14.2.0.5 patch set.
Link: https://lore.kernel.org/r/20220701211425.2708-13-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:24 +0000 (14:14 -0700)]
scsi: lpfc: Update lpfc version to 14.2.0.5
Update lpfc version to 14.2.0.5
Link: https://lore.kernel.org/r/20220701211425.2708-12-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:23 +0000 (14:14 -0700)]
scsi: lpfc: Remove Menlo/Hornet related code
The Menlo/Hornet adapter was never released to the field. As such, driver
code specific to the adapter is unnecessary and should be removed.
Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:22 +0000 (14:14 -0700)]
scsi: lpfc: Refactor lpfc_nvmet_prep_abort_wqe() into lpfc_sli_prep_abort_xri()
lpfc_nvmet_prep_abort_wqe() has a lot of common code with
lpfc_sli_prep_abort_xri().
Delete lpfc_nvmet_prep_abort_wqe() as the wqe can be filled out using the
generic lpfc_sli_prep_abort_xri routine(). Add the wqec option to
lpfc_sli_prep_abort_xri() for lpfc_nvmet_prep_abort_wqe().
Link: https://lore.kernel.org/r/20220701211425.2708-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:21 +0000 (14:14 -0700)]
scsi: lpfc: Revert RSCN_MEMENTO workaround for misbehaved configuration
The RSCN_MEMENTO logic was to workaround a target that does not register
both FCP and NVMe FC4 types at the same time. This caused the
configuration to not produce a second RSCN for the NVMe FC4 type
registration in a timely manner. The intention of the RSCN_MEMENTO flag
was to always signal to try NVMe PRLI.
However, there are other FCP-only target arrays in correctly behaved
configurations that reject the NVMe PRLI followed by a LOGO leading to
never rediscovering the target after an issue_lip (as LOGO causes a repeat
of PLOGI/PRLIs).
Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to
fail while it exists only to succeed on a misbehaved config.
Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com Fixes: 1045592fc968 ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:20 +0000 (14:14 -0700)]
scsi: lpfc: Fix lost NVMe paths during LIF bounce stress test
During a target link bounce test, the driver sees a mismatch between the
NPortId and the WWPN on the node structures (ndlps) involved. When this
occurs, the driver "swaps" the ndlp and new_ndlp node parameters to restore
WWPN/DID uniqueness in the fc_nodes list per vport. However, the driver
neglected to swap the nlp_fc4_type in the ndlp passed to
lpfc_plogi_confirm_nport causing a failure to recover the NVMe PLOGI/PRLI
and ultimately the NVMe paths.
Correct confirm_nport to preserve the fc4 types from the new-ndlp when the
data is moved over ot the ndlp structure.
Link: https://lore.kernel.org/r/20220701211425.2708-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:19 +0000 (14:14 -0700)]
scsi: lpfc: Fix attempted FA-PWWN usage after feature disable
Disabling FA-PWWN should be effective after port reset, but in some cases
it was found to be impossible to clear FA-PWWN usage without a driver
reload.
Clean up FA-PWWN flag management to make enable and disable of the feature
more robust.
Link: https://lore.kernel.org/r/20220701211425.2708-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:18 +0000 (14:14 -0700)]
scsi: lpfc: Fix possible memory leak when failing to issue CMF WQE
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to
issue the CMF WQE in lpfc_issue_cmf_sync_wqe.
If ret_val is non-zero, then free the iocbq request structure.
Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:16 +0000 (14:14 -0700)]
scsi: lpfc: Set PU field when providing D_ID in XMIT_ELS_RSP64_CX iocb
When providing a D_ID in XMIT_ELS_RSP64_CX iocb the PU field should
be set to 3 to describe the parameter being passed to firmware.
Link: https://lore.kernel.org/r/20220701211425.2708-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:15 +0000 (14:14 -0700)]
scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user input
Malformed user input to debugfs results in buffer overflow crashes. Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 1 Jul 2022 21:14:14 +0000 (14:14 -0700)]
scsi: lpfc: Fix uninitialized cqe field in lpfc_nvme_cancel_iocb()
In lpfc_nvme_cancel_iocb(), a cqe is created locally from stack storage.
The code didn't initialize the total_data_placed word, inheriting stack
content.
Initialize the total_data_placed word.
Link: https://lore.kernel.org/r/20220701211425.2708-2-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 30 Jun 2022 19:57:03 +0000 (12:57 -0700)]
scsi: sd: Rework asynchronous resume support
For some technologies, e.g. an ATA bus, resuming can take multiple
seconds. Waiting for resume to finish can cause a very noticeable delay.
Hence this commit that restores the behavior from before "scsi: core: pm:
Rely on the device driver core for async power management" for most SCSI
devices.
This commit introduces a behavior change: if the START command fails, do
not consider this as a SCSI disk resume failure.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880 Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: ericspero@icloud.com Cc: jason600.groome@gmail.com Tested-by: jason600.groome@gmail.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 30 Jun 2022 19:57:02 +0000 (12:57 -0700)]
scsi: core: Move the definition of SCSI_QUEUE_DELAY
Move the definition of SCSI_QUEUE_DELAY to just above the function that
uses it.
Link: https://lore.kernel.org/r/20220630195703.10155-2-bvanassche@acm.org Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.garry@huawei.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.com Suggested-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
i2c: add support for microchip fpga i2c controllers
Add Microchip CoreI2C i2c controller support. This driver supports the
"hard" i2c controller on the Microchip PolarFire SoC & the basic feature
set for "soft" i2c controller implemtations in the FPGA fabric.
Mike Christie [Tue, 28 Jun 2022 20:02:30 +0000 (15:02 -0500)]
scsi: target: Detect UNMAP support post configuration
On our backend we can do something similar to LIO where we can enable and
disable UNMAP support on the fly. In the SCSI/block layer we can detect
this by just doing a rescan. However, LIO cannot detect this change because
we only check during the initial configuration. This patch allows UNMAP
detection to also happen when the user tries to turn it on.
Mike Christie [Tue, 28 Jun 2022 20:02:27 +0000 (15:02 -0500)]
scsi: target: Add callout to configure UNMAP settings
Add a callout to configure a backend's UNMAP settings. This will be used to
allow userspace to configure UNMAP after the initial device setup, similar
to how we can set up the other attributes post device configuration.
Mike Christie [Tue, 28 Jun 2022 20:02:26 +0000 (15:02 -0500)]
scsi: target: Remove incorrect zero blocks WRITE_SAME check
We use WSNZ=1 so if we get a WRITE_SAME with zero logical blocks we are
supposed to fail it. We do this check and failure in target_core_sbc.c
before calling into the backend, so we can remove the incorrect check in
target_core_file.
Mike Christie [Tue, 28 Jun 2022 02:23:25 +0000 (21:23 -0500)]
scsi: target: Fix WRITE_SAME No Data Buffer crash
In newer version of the SBC specs, we have a NDOB bit that indicates there
is no data buffer that gets written out. If this bit is set using commands
like "sg_write_same --ndob" we will crash in target_core_iblock/file's
execute_write_same handlers when we go to access the se_cmd->t_data_sg
because its NULL.
This patch adds a check for the NDOB bit in the common WRITE SAME code
because we don't support it. And, it adds a check for zero SG elements in
each handler in case the initiator tries to send a normal WRITE SAME with
no data buffer.
Eric Farman [Thu, 7 Jul 2022 13:57:37 +0000 (15:57 +0200)]
vfio/ccw: Move FSM open/close to MDEV open/close
Part of the confusion that has existed is the FSM lifecycle of
subchannels between the common CSS driver and the vfio-ccw driver.
During configuration, the FSM state goes from NOT_OPER to STANDBY
to IDLE, but then back to NOT_OPER. For example:
Rearrange the open/close events to align with the mdev open/close,
to better manage the memory and state of the devices as time
progresses. Specifically, make mdev_open() perform the FSM open,
and mdev_close() perform the FSM close instead of reset (which is
both close and open).
This makes the NOT_OPER state a dead-end path, indicating the
device is probably not recoverable without fully probing and
re-configuring the device.
This has the nice side-effect of removing a number of special-cases
where the FSM state is managed outside of the FSM itself (such as
the aforementioned mdev_close() routine).
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-12-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:36 +0000 (15:57 +0200)]
vfio/ccw: Refactor vfio_ccw_mdev_reset
Use both the FSM Close and Open events when resetting an mdev,
rather than making a separate call to cio_enable_subchannel().
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-11-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:35 +0000 (15:57 +0200)]
vfio/ccw: Create a CLOSE FSM event
Refactor the vfio_ccw_sch_quiesce() routine to extract the bit that
disables the subchannel and affects the FSM state. Use this to form
the basis of a CLOSE event that will mirror the OPEN event, and move
the subchannel back to NOT_OPER state.
A key difference with that mirroring is that while OPEN handles the
transition from NOT_OPER => STANDBY, the later probing of the mdev
handles the transition from STANDBY => IDLE. On the other hand,
the CLOSE event will move from one of the operating states {IDLE,
CP_PROCESSING, CP_PENDING} => NOT_OPER. That is, there is no stop
in a STANDBY state on the deconfigure path.
Add a call to cp_free() in this event, such that it is captured for
the various permutations of this event.
In the unlikely event that cio_disable_subchannel() returns -EBUSY,
the remaining logic of vfio_ccw_sch_quiesce() can still be used.
Eric Farman [Thu, 7 Jul 2022 13:57:34 +0000 (15:57 +0200)]
vfio/ccw: Create an OPEN FSM Event
Move the process of enabling a subchannel for use by vfio-ccw
into the FSM, such that it can manage the sequence of lifecycle
events for the device.
That is, if the FSM state is NOT_OPER(erational), then do the work
that would enable the subchannel and move the FSM to STANDBY state.
An attempt to perform this event again from any of the other operating
states (IDLE, CP_PROCESSING, CP_PENDING) will convert the device back
to NOT_OPER so the configuration process can be started again.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-9-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:33 +0000 (15:57 +0200)]
vfio/ccw: Update trace data for not operational event
We currently cut a very basic trace whenever the FSM directs
control to the not operational routine.
Convert this to a message, so it's alongside the other configuration
related traces (create, remove, etc.), and record both the event
that brought us here and the current state of the device.
This will provide some better footprints if things go bad.
Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-8-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:32 +0000 (15:57 +0200)]
vfio/ccw: Flatten MDEV device (un)register
The vfio_ccw_mdev_(un)reg routines are merely vfio-ccw routines that
pass control to mdev_(un)register_device. Since there's only one
caller of each, let's just call the mdev routines directly.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-7-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:31 +0000 (15:57 +0200)]
vfio/ccw: Pass enum to FSM event jumptable
The FSM has an enumerated list of events defined.
Use that as the argument passed to the jump table,
instead of a regular int.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-6-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:30 +0000 (15:57 +0200)]
vfio/ccw: Remove private->mdev
There are no remaining users of private->mdev. Remove it.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220707135737.720765-5-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:29 +0000 (15:57 +0200)]
vfio/ccw: Do not change FSM state in subchannel event
The routine vfio_ccw_sch_event() is tasked with handling subchannel events,
specifically machine checks, on behalf of vfio-ccw. It correctly calls
cio_update_schib(), and if that fails (meaning the subchannel is gone)
it makes an FSM event call to mark the subchannel Not Operational.
If that worked, however, then it decides that if the FSM state was already
Not Operational (implying the subchannel just came back), then it should
simply change the FSM to partially- or fully-open.
Remove this trickery, since a subchannel returning will require more
probing than simply "oh all is well again" to ensure it works correctly.
Fixes: bbe37e4cb8970 ("vfio: ccw: introduce a finite state machine") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-4-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Eric Farman [Thu, 7 Jul 2022 13:57:28 +0000 (15:57 +0200)]
vfio/ccw: Fix FSM state if mdev probe fails
The FSM is in STANDBY state when arriving in vfio_ccw_mdev_probe(),
and this routine converts it to IDLE as part of its processing.
The error exit sets it to IDLE (again) but clears the private->mdev
pointer.
The FSM should of course be managing the state itself, but the
correct thing for vfio_ccw_mdev_probe() to do would be to put
the state back the way it found it.
The corresponding check of private->mdev in vfio_ccw_sch_io_todo()
can be removed, since the distinction is unnecessary at this point.
Fixes: 3bf1311f351ef ("vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220707135737.720765-3-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Michael Kawano [Thu, 7 Jul 2022 13:57:27 +0000 (15:57 +0200)]
vfio/ccw: Remove UUID from s390 debug log
As vfio-ccw devices are created/destroyed, the uuid of the associated
mdevs that are recorded in $S390DBF/vfio_ccw_msg/sprintf get lost.
This is because a pointer to the UUID is stored instead of the UUID
itself, and that memory may have been repurposed if/when the logs are
examined. The result is usually garbage UUID data in the logs, though
there is an outside chance of an oops happening here.
Simply remove the UUID from the traces, as the subchannel number will
provide useful configuration information for problem determination,
and is stored directly into the log instead of a pointer.
As we were the only consumer of mdev_uuid(), remove that too.
Cc: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Michael Kawano <mkawano@linux.ibm.com> Fixes: 60e05d1cf0875 ("vfio-ccw: add some logging") Fixes: b7701dfbf9832 ("vfio-ccw: Register a chp_event callback for vfio-ccw")
[farman: reworded commit message, added Fixes: tags] Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Link: https://lore.kernel.org/r/20220707135737.720765-2-farman@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stylon Wang [Thu, 7 Jul 2022 08:23:29 +0000 (16:23 +0800)]
drm/amd/display: Fix new dmub notification enabling in DM
[Why]
Changes from "Fix for dmub outbox notification enable" need to land
in DM or DMUB outbox notification would be disabled.
[How]
Enable outbox notification only after interrupt are enabled and IRQ
handlers registered. Any pending notification will be sent by DMUB
once outbox notification is enabled.
Fixes: ed7208706448 ("drm/amd/display: Fix for dmub outbox notification enable") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: avoid bogus "vram limit (0) must be a power of 2" warning
I was getting the following message on boot on Linux 5.19-rc5:
radeon 0000:01:05.0: vram limit (0) must be a power of 2
(I didn't use any radeon.vramlimit commandline parameter).
This is caused by
commit 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version")
which removed radeon_check_pot_argument() and converted its users to
is_power_of_2(). The two functions differ in its handling of 0, which is
the default value of radeon_vram_limit: radeon_check_pot_argument()
"incorrectly" considered it a power of 2, while is_power_of_2() does not.
An appropriate conditional silences the warning message.
It is not necessary to add a similar test to other callers of
is_power_of_2() in radeon_device.c. The matching commit in amdgpu:
commit 761175078466 ("drm/amdgpu: use kernel is_power_of_2 rather than local version")
is unaffected by this bug.
Tested on Radeon HD 3200.
Not ccing stable, this is not serious enough.
Fixes: 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 6 Jul 2022 14:04:15 +0000 (10:04 -0400)]
drm/amd/display: make get_refresh_rate() static
It's not used outside of dcn30_resource.c.
Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 6 Jul 2022 13:59:38 +0000 (09:59 -0400)]
drm/amd/display: remove set but unused variable
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used
Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Thu, 30 Jun 2022 18:49:39 +0000 (14:49 -0400)]
drm/amdkfd: optimize svm range evict
It is to avoid unnecessary queue eviction when range
is not mapped to gpu.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 6 Jul 2022 08:38:38 +0000 (16:38 +0800)]
drm/amd/display: correct idle_power_optimizations disablement return value
[Why]
The return value indicates whether the operation(disable/enable) succeeded
or not. The existing logic reports wrong result even if the disablement was
performed successfully. That will make succeeding reenablement abandoned
as dc->idle_optimizations_allowed is always true.
[How]
Correct the return value to reflect the real result of disablement.
Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Fri, 24 Jun 2022 15:15:28 +0000 (11:15 -0400)]
drm/amdkfd: change svm range evict
Adding always evict queues when flag is set to
KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED as if XNACK off.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Fri, 24 Jun 2022 15:03:37 +0000 (11:03 -0400)]
drm/amdkfd: add new flag for svm
It is to add new option for always keeping gpu mapping.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'devfreq-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull a devfreq fix for 5.19-rc6 from Chanwoo Choi:
"- Fix exynos-bus NULL pointer dereference by correctly using the local
generated freq_table to output the debug values instead of using the
profile freq_table that is not used in the driver."
* tag 'devfreq-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
projects / people / ms / linux.git / log
