Aurabindo Pillai [Tue, 28 Jun 2022 20:25:28 +0000 (16:25 -0400)]
drm/amd/display: expose additional modifier for DCN32/321
[Why&How]
Some userspace expect a backwards compatible modifier on DCN32/321. For
hardware with num_pipes more than 16, we expose the most efficient
modifier first. As a fall back method, we need to expose slightly inefficient
modifier AMD_FMT_MOD_TILE_GFX9_64K_R_X after the best option.
Also set the number of packers to fixed value as required per hardware
documentation. This value is cached during hardware initialization and
can be read through the base driver.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are 4 undocumented fields at struct amdgpu_display_manager.
Add documentation for them, fixing those warnings:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_outbox_params' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'num_of_edps' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'disable_hpd_irq' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_aux_transfer_done' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'delayed_hpd_wq' not described in 'amdgpu_display_manager'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Sun, 26 Jun 2022 14:46:15 +0000 (10:46 -0400)]
drm/amd/display: change to_dal_irq_source_dnc32() storage class specifier to static
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn32/irq_service_dcn32.c:39:20: warning: symbol 'to_dal_irq_source_dcn32' was not declared. Should it be static?
to_dal_irq_source_dnc32() is only referenced in irq_service_dnc32.c, so change its
storage class specifier to static.
Fixes: 0efd4374f6b4 ("drm/amd/display: add dcn32 IRQ changes") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Sun, 26 Jun 2022 14:20:53 +0000 (10:20 -0400)]
drm/amd/display: Remove unused globals FORCE_RATE and FORCE_LANE_COUNT
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3885:6: warning: symbol 'FORCE_RATE' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3886:10: warning: symbol 'FORCE_LANE_COUNT' was not declared. Should it be static?
Neither of thse variables is used in dc_link_dp.c. Reviewing the commit listed in
the fixes tag shows neither was used in the original patch. So remove them.
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 23 Jun 2022 16:34:18 +0000 (12:34 -0400)]
drm/amdgpu/display: drop set but unused variable
No longer used so drop it.
Fixes: ec457f837890 ("drm/amd/display: Drop unnecessary detect link code") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 28 Jun 2022 14:40:59 +0000 (10:40 -0400)]
drm/amdgpu: Fix typos in amdgpu_stop_pending_resets
Change amdggpu to amdgpu and pedning to pending
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:
In function 'dc_link_reduce_mst_payload':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:3782:32:
warning: variable 'ret' set but not used [-Wunused-but-set-variable]
3782 | enum act_return_status ret;
Removed the unused ret variable.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiang Jian [Wed, 22 Jun 2022 06:32:31 +0000 (14:32 +0800)]
hwmon: (pmbus/ucd9200) fix typos in comments
Drop the redundant word 'the' in the comments following
/*
* Set PHASE registers on all pages to 0xff to ensure that phase
* specific commands will apply to all phases of a given page (rail).
* This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
* READ_IOUT will return the sum of currents of all phases of a rail,
* and READ_TEMPERATURE2 will return the maximum temperature detected
* for the [the - DROP] phases of the rail.
*/
Eddie James [Tue, 28 Jun 2022 20:30:29 +0000 (15:30 -0500)]
hwmon: (occ) Prevent power cap command overwriting poll response
Currently, the response to the power cap command overwrites the
first eight bytes of the poll response, since the commands use
the same buffer. This means that user's get the wrong data between
the time of sending the power cap and the next poll response update.
Fix this by specifying a different buffer for the power cap command
response.
Vinay Belgaumkar [Mon, 27 Jun 2022 23:03:46 +0000 (16:03 -0700)]
drm/i915/guc/slpc: Add a new SLPC selftest
This test will validate we can achieve actual frequency of RP0. Pcode
grants frequencies based on what GuC is requesting. However, thermal
throttling can limit what is being granted. Add a test to request for
max, but don't fail the test if RP0 is not granted due to throttle
reasons.
Also optimize the selftest by using a common run_test function to avoid
code duplication. Rename the "clamp" tests to vary_max_freq and
vary_min_freq.
v2: Fix compile warning
v3: Review comments (Ashutosh). Added a FIXME for the media RP0 case.
v4: Checkpatch (strict) fixes, remove FIXME and other comments (Ashutosh)
This series implements new lsm flavor for attaching per-cgroup programs to
existing lsm hooks. The cgroup is taken out of 'current', unless
the first argument of the hook is 'struct socket'. In this case,
the cgroup association is taken out of socket. The attachment
looks like a regular per-cgroup attachment: we add new BPF_LSM_CGROUP
attach type which, together with attach_btf_id, signals per-cgroup lsm.
Behind the scenes, we allocate trampoline shim program and
attach to lsm. This program looks up cgroup from current/socket
and runs cgroup's effective prog array. The rest of the per-cgroup BPF
stays the same: hierarchy, local storage, retval conventions
(return 1 == success).
Current limitations:
* haven't considered sleepable bpf; can be extended later on
* not sure the verifier does the right thing with null checks;
see latest selftest for details
* total of 10 (global) per-cgroup LSM attach points
v11:
- Martin: address selftest memory & fd leaks
- Martin: address moving into root (instead have another temp leaf cgroup)
- Martin: move tools/include/uapi/linux/bpf.h change from libbpf patch
into 'sync tools' patch
v10:
- Martin: reword commit message, drop outdated items
- Martin: remove rcu_real_lock from __cgroup_bpf_run_lsm_current
- Martin: remove CONFIG_BPF_LSM from cgroup_bpf_release
- Martin: fix leaking shim reference in bpf_cgroup_link_release
- Martin: WARN_ON_ONCE for bpf_trampoline_lookup in bpf_trampoline_unlink_cgroup_shim
- Martin: sync tools/include/linux/btf_ids.h
- Martin: move progs/flags closer to the places where they are used in __cgroup_bpf_query
- Martin: remove sk_clone_security & sctp_bind_connect from bpf_lsm_locked_sockopt_hooks
- Martin: try to determine vmlinux btf_id in bpftool
- Martin: update tools header in a separate commit
- Quentin: do libbpf_find_kernel_btf from the ops that need it
- lkp@intel.com: another build failure
v9:
Major change since last version is the switch to bpf_setsockopt to
change the socket state instead of letting the progs poke socket directly.
This, in turn, highlights the challenge that we need to care about whether
the socket is locked or not when we call bpf_setsockopt. (with my original
example selftest, the hooks are running early in the init phase for this
not to matter).
For now, I've added two btf id lists:
* hooks where we know the socket is locked and it's safe to call bpf_setsockopt
* hooks where we know the socket is _not_ locked, but the hook works on
the socket that's not yet exposed to userspace so it should be safe
(for this mode, special new set of bpf_{s,g}etsockopt helpers
is added; they don't have sock_owned_by_me check)
Going forward, for the rest of the hooks, this might be a good motivation
to expand lsm cgroup to support sleeping bpf and allow the callers to
lock/unlock sockets or have a new bpf_setsockopt variant that does the
locking.
- ifdef around cleanup in cgroup_bpf_release
- Andrii: a few nits in libbpf patches
- Martin: remove unused btf_id_set_index
- Martin: bring back refcnt for cgroup_atype
- Martin: make __cgroup_bpf_query a bit more readable
- Martin: expose dst_prog->aux->attach_btf as attach_btf_obj_id as well
- Martin: reorg check_return_code path for BPF_LSM_CGROUP
- Martin: return directly from check_helper_call (instead of goto err)
- Martin: add note to new warning in check_return_code, print only for void hooks
- Martin: remove confusing shim reuse
- Martin: use bpf_{s,g}etsockopt instead of poking into socket data
- Martin: use CONFIG_CGROUP_BPF in bpf_prog_alloc_no_stats/bpf_prog_free_deferred
v8:
- CI: fix compile issue
- CI: fix broken bpf_cookie
- Yonghong: remove __bpf_trampoline_unlink_prog comment
- Yonghong: move cgroup_atype around to fill the gap
- Yonghong: make bpf_lsm_find_cgroup_shim void
- Yonghong: rename regs to args
- Yonghong: remove if(current) check
- Martin: move refcnt into bpf_link
- Martin: move shim management to bpf_link ops
- Martin: use cgroup_atype for shim only
- Martin: go back to arrays for managing cgroup_atype(s)
- Martin: export bpf_obj_id(aux->attach_btf)
- Andrii: reorder SEC_DEF("lsm_cgroup+")
- Andrii: OPTS_SET instead of OPTS_HAS
- Andrii: rename attach_btf_func_id
- Andrii: move into 1.0 map
v7:
- there were a lot of comments last time, hope I didn't forget anything,
some of the bigger ones:
- Martin: use/extend BTF_SOCK_TYPE_SOCKET
- Martin: expose bpf_set_retval
- Martin: reject 'return 0' at the verifier for 'void' hooks
- Martin: prog_query returns all BPF_LSM_CGROUP, prog_info
returns attach_btf_func_id
- Andrii: split libbpf changes
- Andrii: add field access test to test_progs, not test_verifier (still
using asm though)
- things that I haven't addressed, stating them here explicitly, let
me know if some of these are still problematic:
1. Andrii: exposing only link-based api: seems like the changes
to support non-link-based ones are minimal, couple of lines,
so seems like it worth having it?
2. Alexei: applying cgroup_atype for all cgroup hooks, not only
cgroup lsm: looks a bit harder to apply everywhere that I
originally thought; with lsm cgroup, we have a shim_prog pointer where
we store cgroup_atype; for non-lsm programs, we don't have a
trace program where to store it, so we still need some kind
of global table to map from "static" hook to "dynamic" slot.
So I'm dropping this "can be easily extended" clause from the
description for now. I have converted this whole machinery
to an RCU-managed list to remove synchronize_rcu().
- also note that I had to introduce new bpf_shim_tramp_link and
moved refcnt there; we need something to manage new bpf_tramp_link
v6:
- remove active count & stats for shim program (Martin KaFai Lau)
- remove NULL/error check for btf_vmlinux (Martin)
- don't check cgroup_atype in bpf_cgroup_lsm_shim_release (Martin)
- use old_prog (instead of passed one) in __cgroup_bpf_detach (Martin)
- make sure attach_btf_id is the same in __cgroup_bpf_replace (Martin)
- enable cgroup local storage and test it (Martin)
- properly implement prog query and add bpftool & tests (Martin)
- prohibit non-shared cgroup storage mode for BPF_LSM_CGROUP (Martin)
v5:
- __cgroup_bpf_run_lsm_socket remove NULL sock/sk checks (Martin KaFai Lau)
- __cgroup_bpf_run_lsm_{socket,current} s/prog/shim_prog/ (Martin)
- make sure bpf_lsm_find_cgroup_shim works for hooks without args (Martin)
- __cgroup_bpf_attach make sure attach_btf_id is the same when replacing (Martin)
- call bpf_cgroup_lsm_shim_release only for LSM_CGROUP (Martin)
- drop BPF_LSM_CGROUP from bpf_attach_type_to_tramp (Martin)
- drop jited check from cgroup_shim_find (Martin)
- new patch to convert cgroup_bpf to hlist_node (Jakub Sitnicki)
- new shim flavor for 'struct sock' + list of exceptions (Martin)
v4:
- fix build when jit is on but syscall is off
v3:
- add BPF_LSM_CGROUP to bpftool
- use simple int instead of refcnt_t (to avoid use-after-free
false positive)
Implement bpf_prog_query_opts as a more expendable version of
bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as
well:
* prog_attach_flags is a per-program attach_type; relevant only for
lsm cgroup program which might have different attach_flags
per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which
specifies real btf function id for lsm cgroup attachments
I don't see how to make it nice without introducing btf id lists
for the hooks where these helpers are allowed. Some LSM hooks
work on the locked sockets, some are triggering early and
don't grab any locks, so have two lists for now:
1. LSM hooks which trigger under socket lock - minority of the hooks,
but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger
early in the socket creation path where it should be safe to
do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might
be a good gateway to sleeping lsm cgroup hooks in the future.
We can either expose lock/unlock operations (and add tracking
to the verifier) or have another set of bpf_setsockopt
wrapper that grab the locks and might sleep.
bpf: minimize number of allocated lsm slots per program
Previous patch adds 1:1 mapping between all 211 LSM hooks
and bpf_cgroup program array. Instead of reserving a slot per
possible hook, reserve 10 slots per cgroup for lsm programs.
Those slots are dynamically allocated on demand and reclaimed.
Allow attaching to lsm hooks in the cgroup context.
Attaching to per-cgroup LSM works exactly like attaching
to other per-cgroup hooks. New BPF_LSM_CGROUP is added
to trigger new mode; the actual lsm hook we attach to is
signaled via existing attach_btf_id.
For the hooks that have 'struct socket' or 'struct sock' as its first
argument, we use the cgroup associated with that socket. For the rest,
we use 'current' cgroup (this is all on default hierarchy == v2 only).
Note that for some hooks that work on 'struct sock' we still
take the cgroup from 'current' because some of them work on the socket
that hasn't been properly initialized yet.
Behind the scenes, we allocate a shim program that is attached
to the trampoline and runs cgroup effective BPF programs array.
This shim has some rudimentary ref counting and can be shared
between several programs attaching to the same lsm hook from
different cgroups.
Note that this patch bloats cgroup size because we add 211
cgroup_bpf_attach_type(s) for simplicity sake. This will be
addressed in the subsequent patch.
Also note that we only add non-sleepable flavor for now. To enable
sleepable use-cases, bpf_prog_run_array_cg has to grab trace rcu,
shim programs have to be freed via trace rcu, cgroup_bpf.effective
should be also trace-rcu-managed + maybe some other changes that
I'm not aware of.
/* size: 504, cachelines: 8, members: 7 */
/* sum members: 503, holes: 1, sum holes: 1 */
/* last cacheline: 56 bytes */
};
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20220628174314.1216643-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lukas Bulwahn [Tue, 28 Jun 2022 05:34:11 +0000 (07:34 +0200)]
PM / devfreq: passive: revert an editing accident in SPDX-License line
Commit 26984d9d581e ("PM / devfreq: passive: Keep cpufreq_policy for
possible cpus") reworked governor_passive.c, and accidently added a
tab in the first line, i.e., the SPDX-License-Identifier line.
The checkpatch script warns with the SPDX_LICENSE_TAG warning, and hence
pointed this issue out while investigating checkpatch warnings.
Revert this editing accident. No functional change.
Remove cpufreq_passive_unregister_notifier from
cpufreq_passive_register_notifier in case of error as devfreq core
already call unregister on GOV_START fail.
This fix the kernel always printing a WARN on governor PROBE_DEFER as
cpufreq_passive_unregister_notifier is called two times and return
error on the second call as the cpufreq is already unregistered.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
PM / devfreq: Rework freq_table to be local to devfreq struct
On a devfreq PROBE_DEFER, the freq_table in the driver profile struct,
is never reset and may be leaved in an undefined state.
This comes from the fact that we store the freq_table in the driver
profile struct that is commonly defined as static and not reset on
PROBE_DEFER.
We currently skip the reinit of the freq_table if we found
it's already defined since a driver may declare his own freq_table.
This logic is flawed in the case devfreq core generate a freq_table, set
it in the profile struct and then PROBE_DEFER, freeing the freq_table.
In this case devfreq will found a NOT NULL freq_table that has been
freed, skip the freq_table generation and probe the driver based on the
wrong table.
To fix this and correctly handle PROBE_DEFER, use a local freq_table and
max_state in the devfreq struct and never modify the freq_table present
in the profile struct if it does provide it.
Fixes: 0ec09ac2cebe ("PM / devfreq: Set the freq_table of devfreq device") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Miaoqian Lin [Thu, 26 May 2022 08:28:56 +0000 (12:28 +0400)]
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
This function only calls of_node_put() in normal path,
missing it in error paths.
Add missing of_node_put() to avoid refcount leak.
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
With the passive governor, the cpu based scaling can PROBE_DEFER due to
the fact that CPU policy are not ready.
The cpufreq passive unregister notifier is called both from the
GOV_START errors and for the GOV_STOP and assume the notifier is
successfully registred every time. With GOV_START failing it's wrong to
loop over each possible CPU since the register path has failed for
some CPU policy not ready. Change the logic and unregister the notifer
based on the current allocated parent_cpu_data list to correctly handle
errors and the governor unregister path.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
PM / devfreq: Mute warning on governor PROBE_DEFER
Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
The cpufreq passive register notifier can PROBE_DEFER and the devfreq
struct is freed and then reallocaed on probe retry.
The current logic assume that the code can't PROBE_DEFER so the devfreq
struct in the this variable in devfreq_passive_data is assumed to be
(if already set) always correct.
This cause kernel panic as the code try to access the wrong address.
To correctly handle this, update the this variable in
devfreq_passive_data to the devfreq reallocated struct.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tom Rix [Wed, 29 Jun 2022 19:20:45 +0000 (15:20 -0400)]
power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
sparse reports
drivers/power/reset/pwr-mlxbf.c:19:12: warning: symbol 'rst_pwr_hid' was not declared. Should it be static?
drivers/power/reset/pwr-mlxbf.c:20:12: warning: symbol 'low_pwr_hid' was not declared. Should it be static?
Both rst_pwr_hid and low_pwr_hid are only used in a single function
so they should be local variables.
Fixes: a4c0094fcf76 ("power: reset: pwr-mlxbf: add BlueField SoC power control driver") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Jean Delvare [Wed, 22 Jun 2022 06:37:43 +0000 (08:37 +0200)]
i2c: piix4: Fix a memory leak in the EFCH MMIO support
The recently added support for EFCH MMIO regions introduced a memory
leak in that code path. The leak is caused by the fact that
release_resource() merely removes the resource from the tree but does
not free its memory. We need to call release_mem_region() instead,
which does free the memory. As a nice side effect, this brings back
some symmetry between the legacy and MMIO paths.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Terry Bowman <Terry.Bowman@amd.com> Fixes: 7c148722d074 ("i2c: piix4: Add EFCH MMIO support to region request and release") Signed-off-by: Wolfram Sang <wsa@kernel.org>
Thinh Nguyen [Tue, 28 Jun 2022 01:41:19 +0000 (18:41 -0700)]
usb: dwc3: gadget: Fix event pending check
The DWC3_EVENT_PENDING flag is used to protect against invalid call to
top-half interrupt handler, which can occur when there's a delay in
software detection of the interrupt line deassertion.
However, the clearing of this flag was done prior to unmasking the
interrupt line, creating opportunity where the top-half handler can
come. This breaks the serialization and creates a race between the
top-half and bottom-half handler, resulting in losing synchronization
between the controller and the driver when processing events.
To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at
the end of the bottom-half handler.
Neal Liu [Tue, 28 Jun 2022 02:14:36 +0000 (10:14 +0800)]
usb: gadget: f_mass_storage: Make CD-ROM emulation works with Windows OS
Add read TOC with format 1 to support CD-ROM emulation with
Windows OS.
This patch is tested on Windows OS Server 2019.
Fixes: 89ada0fe669a ("usb: gadget: f_mass_storage: Make CD-ROM emulation work with Mac OS-X") Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220628021436.3252262-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid a kernel-doc warning by documenting it:
drivers/usb/dwc3/core.h:1328: warning: Function parameter or member 'async_callbacks' not described in 'dwc3'
usb: typec_altmode: add a missing "@" at a kernel-doc parameter
Without that, the parameter is not properly parsed:
include/linux/usb/typec_altmode.h:132: warning: Function parameter or member 'altmode' not described in 'typec_altmode_get_orientation'
Ruili Ji [Wed, 22 Jun 2022 06:20:22 +0000 (14:20 +0800)]
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Carlos Llamas [Tue, 21 Jun 2022 20:39:21 +0000 (20:39 +0000)]
drm/fourcc: fix integer type usage in uapi header
Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:
#include <drm/drm_fourcc.h>
int main()
{
unsigned long x = AMD_FMT_MOD_CLEAR(RB);
return 0;
}
gcc error:
drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
5 | unsigned long x = AMD_FMT_MOD_CLEAR(RB);
| ^~~~~~~~~~~~~~~~~
This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.
[1] https://lkml.org/lkml/2019/6/5/18
Fixes: 8ba16d599374 ("drm/fourcc: Add AMD DRM modifiers.") Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Williams [Fri, 24 Jun 2022 23:05:26 +0000 (16:05 -0700)]
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
When a platform marks a memory range as "special purpose" it is not
onlined as System RAM by default. However, it is still suitable for
error injection. Add IORES_DESC_SOFT_RESERVED to einj_error_inject() as
a permissible memory type in the sanity checking of the arguments to
_EINJ.
Fixes: 262b45ae3ab4 ("x86/efi: EFI soft reservation to E820 enumeration") Reviewed-by: Tony Luck <tony.luck@intel.com> Reported-by: Omar Avelar <omar.avelar@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ming Lei [Fri, 24 Jun 2022 14:12:53 +0000 (22:12 +0800)]
dm: improve BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling
If either BLK_STS_DM_REQUEUE or BLK_STS_AGAIN is returned for POLLED
io, we requeue the original bio into deferred list and kick md->wq to
re-submit it to block layer.
Improve the handling in the following way:
1) Factor out dm_handle_requeue() for handling dm_io requeue.
2) Unify handling for BLK_STS_DM_REQUEUE and BLK_STS_AGAIN: clear
REQ_POLLED for BLK_STS_DM_REQUEUE too, for the sake of simplicity,
given BLK_STS_DM_REQUEUE is very unusual.
3) Queue md->wq explicitly in dm_handle_requeue(), so requeue handling
becomes more robust.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Tony W Wang-oc [Thu, 23 Jun 2022 01:21:26 +0000 (09:21 +0800)]
cpufreq: ACPI: Add Zhaoxin/Centaur turbo boost control interface support
Recent Zhaoxin/Centaur CPUs support X86_FEATURE_IDA and the turbo boost
can be dynamically enabled or disabled through MSR 0x1a0[38] in the same
way as Intel. So add turbo boost control support for these CPUs too.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tony Luck [Wed, 22 Jun 2022 17:09:06 +0000 (10:09 -0700)]
ACPI: APEI: Better fix to avoid spamming the console with old error logs
The fix in commit 3f8dec116210 ("ACPI/APEI: Limit printable size of BERT
table data") does not work as intended on systems where the BIOS has a
fixed size block of memory for the BERT table, relying on s/w to quit
when it finds a record with estatus->block_status == 0. On these systems
all errors are suppressed because the check:
if (region_len < ACPI_BERT_PRINT_MAX_LEN)
always fails.
New scheme skips individual CPER records that are too large, and also
limits the total number of records that will be printed to 5.
Fixes: 3f8dec116210 ("ACPI/APEI: Limit printable size of BERT table data") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sudeep Holla [Tue, 21 Jun 2022 15:04:36 +0000 (16:04 +0100)]
Documentation: ACPI: Update links and references to DSD related docs
The existing references to DSD are stale and outdated. The new process
and guidance is maintained @https://github.com/UEFI/DSD-Guide
Update the existing documents to reflect the same.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Mon, 20 Jun 2022 09:25:45 +0000 (11:25 +0200)]
ACPI: EC: Re-use boot_ec when possible even when EC_FLAGS_TRUST_DSDT_GPE is set
EC_FLAGS_TRUST_DSDT_GPE only does anything when the:
if (boot_ec && ec->command_addr == boot_ec->command_addr &&
ec->data_addr == boot_ec->data_addr)
conditions are all true. Normally acpi_ec_add() would re-use the boot_ec
struct acpi_ec in this case. But when the EC_FLAGS_TRUST_DSDT_GPE flag was
set the code would continue with a newly allocated (second) struct acpi_ec.
There is no reason to use a second struct acpi_ec if all the above checks
match. Instead just change boot_ec->gpe to ec->gpe, when the flag is set,
similar to how this is already one done for boot_ec->handle.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Mon, 20 Jun 2022 09:25:44 +0000 (11:25 +0200)]
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk
It seems that these quirks are no longer necessary since
commit 69b957c26b32 ("ACPI: EC: Fix possible issues related to EC
initialization order"), which has fixed this in a generic manner.
There are 3 commits adding DMI entries with this quirk (adding multiple
DMI entries per commit). 2/3 commits are from before the generic fix.
Which leaves commit 6306f0431914 ("ACPI: EC: Make more Asus laptops
use ECDT _GPE"), which was committed way after the generic fix.
But this was just due to slow upstreaming of it. This commit stems
from Endless from 15 Aug 2017 (committed upstream 20 May 2021):
https://github.com/endlessm/linux/pull/288
The current code should work fine without this:
1. The EC_FLAGS_IGNORE_DSDT_GPE flag is only checked in ec_parse_device(),
like this:
2. ec_parse_device() is only called from acpi_ec_add() and
acpi_ec_dsdt_probe()
3. acpi_ec_dsdt_probe() starts with:
if (boot_ec)
return;
so it only calls ec_parse_device() when boot_ec == NULL, meaning that
the quirk never triggers for this call. So only the call in
acpi_ec_add() matters.
4. acpi_ec_add() does the following after the ec_parse_device() call:
if (boot_ec && ec->command_addr == boot_ec->command_addr &&
ec->data_addr == boot_ec->data_addr &&
!EC_FLAGS_TRUST_DSDT_GPE) {
/*
* Trust PNP0C09 namespace location rather than
* ECDT ID. But trust ECDT GPE rather than _GPE
* because of ASUS quirks, so do not change
* boot_ec->gpe to ec->gpe.
*/
boot_ec->handle = ec->handle;
acpi_handle_debug(ec->handle, "duplicated.\n");
acpi_ec_free(ec);
ec = boot_ec;
}
The quirk only matters if boot_ec != NULL and EC_FLAGS_TRUST_DSDT_GPE
is never set at the same time as EC_FLAGS_IGNORE_DSDT_GPE.
That means that if the addresses match we always enter this if block and
then only the ec->handle part of the data stored in ec by ec_parse_device()
is used and the rest is thrown away, after which ec is made to point
to boot_ec, at which point ec->gpe == boot_ec->gpe, so the same result
as with the quirk set, independent of the value of the quirk.
Also note the comment in this block which indicates that the gpe result
from ec_parse_device() is deliberately not taken to deal with buggy
Asus laptops and all DMI quirks setting EC_FLAGS_IGNORE_DSDT_GPE are for
Asus laptops.
Based on the above I believe that unless on some quirked laptops
the ECDT and DSDT EC addresses do not match we can drop the quirk.
I've checked dmesg output to ensure the ECDT and DSDT EC addresses match
for quirked models using https://linux-hardware.org hw-probe reports.
I've been able to confirm that the addresses match for the following
models this way: GL702VMK, X505BA, X505BP, X550VXK, X580VD.
Whereas for the following models I could find any dmesg output:
FX502VD, FX502VE, X542BA, X542BP.
Note the models without dmesg all were submitted in patches with a batch
of models and other models from the same batch checkout ok.
This, combined with that all the code adding the quirks was written before
the generic fix makes me believe that it is safe to remove this quirk now.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Drake <drake@endlessos.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Aidan MacDonald [Thu, 23 Jun 2022 21:14:20 +0000 (22:14 +0100)]
regmap-irq: Deprecate the not_fixed_stride flag
This flag is a bit of a hack and the same thing can be accomplished
using a custom ->get_irq_reg() callback. Add a warning to catch any
use of the flag.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:19 +0000 (22:14 +0100)]
regmap-irq: Add get_irq_reg() callback
Replace the internal sub_irq_reg() function with a public callback
that drivers can use when they have more complex register layouts.
The default implementation is regmap_irq_get_irq_reg_linear(), used
if the chip doesn't provide its own callback.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:18 +0000 (22:14 +0100)]
regmap-irq: Fix inverted handling of unmask registers
To me "unmask" suggests that we write 1s to the register when
an interrupt is enabled. This also makes sense because it's the
opposite of what the "mask" register does (write 1s to disable
an interrupt).
But regmap-irq does the opposite: for a disabled interrupt, it
writes 1s to "unmask" and 0s to "mask". This is surprising and
deviates from the usual way mask registers are handled.
Additionally, mask_invert didn't interact with unmask registers
properly -- it caused them to be ignored entirely.
Fix this by making mask and unmask registers orthogonal, using
the following behavior:
* Mask registers are written with 1s for disabled interrupts.
* Unmask registers are written with 1s for enabled interrupts.
This behavior supports both normal or inverted mask registers
and separate set/clear registers via different combinations of
mask_base/unmask_base.
The old unmask register behavior is deprecated. Drivers need to
opt-in to the new behavior by setting mask_unmask_non_inverted.
Warnings are issued if the driver relies on deprecated behavior.
Chips that only set one of mask_base/unmask_base don't have to
use the mask_unmask_non_inverted flag because that use case was
previously not supported.
The mask_invert flag is also deprecated in favor of describing
inverted mask registers as unmask registers.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:16 +0000 (22:14 +0100)]
regmap-irq: Introduce config registers for irq types
Config registers provide a more uniform approach to handling irq type
registers. They are essentially an extension of the virtual registers
used by the qcom-pm8008 driver.
Config registers can be represented as a 2D array:
There are 'num_config_bases' base registers, each of which is used to
address 'num_config_regs' registers. The addresses are calculated in
the same way as for other bases. It is assumed that an irq's type is
controlled by one column of registers; that column is identified by
the irq's 'type_reg_offset'.
The set_type_config() callback is responsible for updating the config
register contents. It receives an array of buffers (each represents a
row of registers) and the index of the column to update, along with
the 'struct regmap_irq' description and requested irq type.
Buffered values are written to registers in regmap_irq_sync_unlock().
Note that the entire register contents are overwritten, which is a
minor change in behavior from type registers via 'type_base'.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:15 +0000 (22:14 +0100)]
regmap-irq: Refactor checks for status bulk read support
There are several conditions that must be satisfied to support
bulk read of status registers. Move the check into a function
to avoid duplicating it in two places.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:14 +0000 (22:14 +0100)]
regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
Commit a71411dbf6c8 ("regmap: irq: add chip option mask_writeonly")
introduced the mask_writeonly option, but it isn't used now and it
appears it's never been used by any in-tree drivers. The motivation
for the option is mentioned in the commit message,
Some irq controllers have writeonly/multipurpose register
layouts. In those cases we read invalid data back. [...]
The option causes mask register updates to use regmap_write_bits()
instead of regmap_update_bits().
However, regmap_write_bits() doesn't solve the reading invalid data
problem. It's still a read-modify-write op like regmap_update_bits().
The difference is that 'update bits' will only write the new value
if it is different from the current value, while 'write bits' will
write the new value unconditionally, even if it's the same as the
current value.
This seems like a bit of a specialized use case and probably isn't
that useful for regmap-irq, so let's just remove the option and go
back to using an 'update bits' op for the mask registers. We can
always add the option back if some driver ends up needing it in the
future.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:13 +0000 (22:14 +0100)]
regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
regmap_irq_update_bits() is misnamed and should only be used for
updating mask registers, since it checks the mask_writeonly flag.
However, it was also used for updating wake and type registers.
It's safe to replace these uses with regmap_update_bits() because
there are no users of the mask_writeonly flag.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:12 +0000 (22:14 +0100)]
regmap-irq: Remove an unnecessary restriction on type_in_mask
Check types_supported instead of checking type_rising/falling_val
when using type_in_mask interrupts. This makes the intent clearer
and allows a type_in_mask irq to support level or edge triggers,
rather than only edge triggers.
Update the documentation and comments to reflect the new behavior.
This shouldn't affect existing drivers, because if they didn't
set types_supported properly the type buffer wouldn't be updated.
Aidan MacDonald [Thu, 23 Jun 2022 21:14:10 +0000 (22:14 +0100)]
regmap-irq: Remove unused type_reg_stride field
It appears that no chip ever required a nonzero type_reg_stride
and commit 1066cfbdfa3f ("regmap-irq: Extend sub-irq to support
non-fixed reg strides") broke support. Just remove the field.
Because we need to use these parameters, we can't share full-code for now,
but can share some codes.
This patch adds __snd_soc_of_get/put_xxx() functions, and share the code.
commit 900dedd7e47cc3f ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
adds new snd_soc_of_get_dai_link_cpus(), but it is using
"codec" everywhere. It is very strange, and is issue when error case.
It should call cpu instead of codec in error case.
This patch tidyup it.
Fixes: 900dedd7e47cc3f ("ASoC: Introduce snd_soc_of_get_dai_link_cpus") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/87zgi5p7k1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Cédric Le Goater [Wed, 22 Jun 2022 16:16:17 +0000 (18:16 +0200)]
spi: aspeed: Fix division by zero
When using the normal read operation for data transfers, the dummy bus
width is zero. In that case, they are no dummy bytes to transfer and
setting the dummy field in the controller register becomes useless.
Issue was found on a custom "Bifrost" board based on the AST2500 SoC
and using a MX25L51245GMI-08G SPI Flash.
Reported-by: Ian Woloschin <ian.woloschin@akamai.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Ian Woloschin <iwolosch@akamai.com> Fixes: 9da06d7bdec7dad80 ("spi: aspeed: Add support for direct mapping") Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220622161617.3719096-3-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
Cédric Le Goater [Wed, 22 Jun 2022 16:16:16 +0000 (18:16 +0200)]
spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
The default value of the control register is set using the direct
mapping information passed to the ->dirmap_create() handler. Dump the
mapping range and the SPI memory operation characteristics to analyze
how the register value has been computed.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220622161617.3719096-2-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
Riwen Lu [Fri, 17 Jun 2022 02:51:52 +0000 (10:51 +0800)]
ACPI: processor: Drop leftover acpi_processor_get_limit_info() declaration
Commit 22e7551eb6fd ("ACPI / processor: Remove acpi_processor_get_limit_info()"),
left it behind, so drop it.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Riwen Lu [Fri, 17 Jun 2022 02:51:51 +0000 (10:51 +0800)]
ACPI: processor: Split out thermal initialization from ACPI PSS
Commit 239708a3af44 ("ACPI: Split out ACPI PSS from ACPI Processor
driver"), moves processor thermal registration to acpi_pss_perf_init(),
which doesn't get executed if ACPI_CPU_FREQ_PSS is not enabled.
As ARM64 supports P-states using CPPC, it should be possible to also
support processor passive cooling even if PSS is not enabled. Split
out the processor thermal cooling register from ACPI PSS to support
this, and move it into a separate function in processor_thermal.c.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
[ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rob Herring [Fri, 3 Jun 2022 01:19:33 +0000 (20:19 -0500)]
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
Convert the CoreSight CPU debug binding to DT schema format.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220603011933.3277315-4-robh@kernel.org Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Rob Herring [Fri, 3 Jun 2022 01:19:32 +0000 (20:19 -0500)]
dt-bindings: arm: Convert CoreSight bindings to DT schema
Each CoreSight component has slightly different requirements and
nothing applies to every component, so each CoreSight component has its
own schema document.
Linus Torvalds [Wed, 29 Jun 2022 16:20:40 +0000 (09:20 -0700)]
Merge tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- seek null check (don't use f_seek op directly and blindly)
- offset validation in FSCTL_SET_ZERO_DATA
- fallocate fix (relates e.g. to xfstests generic/091 and 263)
- two cleanup fixes
- fix socket settings on some arch
* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use vfs_llseek instead of dereferencing NULL
ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
ksmbd: remove duplicate flag set in smb2_write
ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
ksmbd: use SOCK_NONBLOCK type for kernel_accept()
Jeff Layton [Mon, 6 Jun 2022 23:31:42 +0000 (19:31 -0400)]
ceph: wait on async create before checking caps for syncfs
Currently, we'll call ceph_check_caps, but if we're still waiting
on the reply, we'll end up spinning around on the same inode in
flush_dirty_session_caps. Wait for the async create reply before
flushing caps.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55823 Fixes: fbed7045f552 ("ceph: wait for async create reply before sending any cap messages") Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Mark Brown [Wed, 29 Jun 2022 15:58:08 +0000 (16:58 +0100)]
ASoC: Refactor non_legacy_dai_naming flag
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
Darrick J. Wong [Sat, 25 Jun 2022 17:47:45 +0000 (10:47 -0700)]
xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
On a system with a realtime volume and a 28k realtime extent,
generic/491 fails because the test opens a file on a frozen filesystem
and closing it causes xfs_release -> xfs_can_free_eofblocks to
mistakenly think that the the blocks of the realtime extent beyond EOF
are posteof blocks to be freed. Realtime extents cannot be partially
unmapped, so this is pointless. Worse yet, this triggers posteof
cleanup, which stalls on a transaction allocation, which is why the test
fails.
Teach the predicate to account for realtime extents properly.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Sat, 25 Jun 2022 17:01:20 +0000 (10:01 -0700)]
xfs: don't hold xattr leaf buffers across transaction rolls
Now that we've established (again!) that empty xattr leaf buffers are
ok, we no longer need to bhold them to transactions when we're creating
new leaf blocks. Get rid of the entire mechanism, which should simplify
the xattr code quite a bit.
The original justification for using bhold here was to prevent the AIL
from trying to write the empty leaf block into the fs during the brief
time that we release the buffer lock. The reason for /that/ was to
prevent recovery from tripping over the empty ondisk block.
Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Darrick J. Wong [Fri, 24 Jun 2022 22:01:28 +0000 (15:01 -0700)]
xfs: empty xattr leaf header blocks are not corruption
TLDR: Revert commit 51e6104fdb95 ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify") because it was wrong.
Every now and then we get a corruption report from the kernel or
xfs_repair about empty leaf blocks in the extended attribute structure.
We've long thought that these shouldn't be possible, but prior to 5.18
one would shake loose in the recoveryloop fstests about once a month.
A new addition to the xattr leaf block verifier in 5.19-rc1 makes this
happen every 7 minutes on my testing cloud. I added a ton of logging to
detect any time we set the header count on an xattr leaf block to zero.
This produced the following dmesg output on generic/388:
So now we know that someone is creating empty xattr leaf blocks as part
of converting a sf xattr structure into a leaf xattr structure. The
conversion routine logs any existing sf attributes in the same
transaction that creates the leaf block, so we know this is a setxattr
to a file that has no attributes at all.
Next, g/388 calls the shutdown ioctl and cycles the mount to trigger log
recovery. I also augmented buffer item recovery to call ->verify_struct
on any attr leaf blocks and complain if it finds a failure:
As you can see, the bhold keeps the leaf buffer locked and thus prevents
the *AIL* from tripping over the ichdr.count==0 check in the write
verifier. Unfortunately, it doesn't prevent the log from getting
flushed to disk, which sets up log recovery to fail.
So. It's clear that the kernel has always had the ability to persist
attr leaf blocks with ichdr.count==0, which means that it's part of the
ondisk format now.
Unfortunately, this check has been added and removed multiple times
throughout history. It first appeared in[1] kernel 3.10 as part of the
early V5 format patches. The check was later discovered to break log
recovery and hence disabled[2] during log recovery in kernel 4.10.
Simultaneously, the check was added[3] to xfs_repair 4.9.0 to try to
weed out the empty leaf blocks. This was still not correct because log
recovery would recover an empty attr leaf block successfully only for
regular xattr operations to trip over the empty block during of the
block during regular operation. Therefore, the check was removed
entirely[4] in kernel 5.7 but removal of the xfs_repair check was
forgotten. The continued complaints from xfs_repair lead to us
mistakenly re-adding[5] the verifier check for kernel 5.19. Remove it
once again.
[1] 517c22207b04 ("xfs: add CRCs to attr leaf blocks")
[2] 2e1d23370e75 ("xfs: ignore leaf attr ichdr.count in verifier
during log replay")
[3] f7140161 ("xfs_repair: junk leaf attribute if count == 0")
[4] f28cef9e4dac ("xfs: don't fail verifier on empty attr3 leaf
block")
[5] 51e6104fdb95 ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify")
Looking at the rest of the xattr code, it seems that files with empty
leaf blocks behave as expected -- listxattr reports no attributes;
getxattr on any xattr returns nothing as expected; removexattr does
nothing; and setxattr can add attributes just fine.
Original-bug: 517c22207b04 ("xfs: add CRCs to attr leaf blocks") Still-not-fixed-by: 2e1d23370e75 ("xfs: ignore leaf attr ichdr.count in verifier during log replay")
Removed-in: f28cef9e4dac ("xfs: don't fail verifier on empty attr3 leaf block") Fixes: 51e6104fdb95 ("xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
Mike Leach [Tue, 28 Jun 2022 17:30:04 +0000 (18:30 +0100)]
coresight: syscfg: Update load and unload operations
The configfs system is a source of access to the config information in the
configuration and feature lists.
This can result in additional LOCKDEP issues as a result of the mutex
ordering between the config list mutex (cscfg_mutex) and the configfs
system mutexes.
As such we need to adjust how load/unload operations work to ensure correct
operation.
1) Previously the cscfg_mutex was held throughout the load/unload
operation. This is now only held during configuration list manipulations,
resulting in a multi-stage load/unload process.
2) All operations that manipulate the configfs representation of the
configurations and features are now separated out and run without the
cscfg_mutex being held. This avoids circular lock_dep issue with the
built-in configfs mutexes and semaphores
3) As the load and unload is now multi-stage, some parts under the
cscfg_mutex and others not:
i) A flag indicating a load / unload operation in progress is used to
serialise load / unload operations.
ii) activating any configuration not possible when unload is in progress.
iii) Configurations have an "available" flag set only after the last load
stage for the configuration is complete. Activation of the configuration
not possible till flag is set.
4) Following load/unload rules remain:
i) Unload prevented while any configuration is active remains.
ii) Unload in strict reverse order of load.
iii) Existing configurations can be activated while a new load operation
is underway. (by definition there can be no dependencies between an
existing configuration and a new loading one due to ii) above.)
Fixes: eb2ec49606c2 ("coresight: syscfg: Update load API for config loadable modules") Reported-by: Suzuki Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220628173004.30002-3-mike.leach@linaro.org Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Stephan Gerhold [Thu, 23 Jun 2022 09:46:14 +0000 (11:46 +0200)]
regulator: qcom_smd: Add PM8909 RPM regulators
The set of regulators available in the PM8909 PMIC is similar to PM8916
which is already supported by the driver. s3, s4 and l16 are missing.
However, probing the SPMI hardware identification registers using the
qcom_spmi-regulator driver reveals that the regulators in PM8909 are
actually some kind of mixture between PM8916 and PM8226:
projects / people / ms / linux.git / log
