Keith Busch [Fri, 10 Jun 2022 19:58:20 +0000 (12:58 -0700)]
block: fix infinite loop for invalid zone append
Returning 0 early from __bio_iov_append_get_pages() for the
max_append_sectors warning just creates an infinite loop since 0 means
success, and the bio will never fill from the unadvancing iov_iter. We
could turn the return into an error value, but it will already be turned
into an error value later on, so just remove the warning. Clearly no one
ever hit it anyway.
Fixes: 0512a75b98f84 ("block: Introduce REQ_OP_ZONE_APPEND") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220610195830.3574005-2-kbusch@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are only a few drivers that do not call
spi_finalize_current_message() in the context of transfer_one_message(),
and even for those cases the completion ctlr->cur_msg_completion is not
needed always. The calls to complete() and wait_for_completion() each
take a spin-lock, which is costly. This patch makes it possible to avoid
those calls in the big majority of cases, by introducing two flags that
with the help of ordering via barriers can avoid using the completion
safely. In case of a race with the context calling
spi_finalize_current_message(), the scheme errs on the safe side and takes
the completion.
The impact of this patch is worth the effort: On a i.MX8MM SoC, the time
the SPI bus is idle between two consecutive calls to spi_sync(), is
reduced from 19.6us to 16.8us... roughly 15%.
David Jander [Tue, 21 Jun 2022 06:12:33 +0000 (08:12 +0200)]
spi: Ensure the io_mutex is held until spi_finalize_current_message()
This patch introduces a completion that is completed in
spi_finalize_current_message() and waited for in
__spi_pump_transfer_message(). This way all manipulation of ctlr->cur_msg
is done with the io_mutex held and strictly ordered:
__spi_pump_transfer_message() will not return until
spi_finalize_current_message() is done using ctlr->cur_msg, and its
calling context is only touching ctlr->cur_msg after returning.
Due to this, we can safely drop the spin-locks around ctlr->cur_msg.
David Jander [Tue, 21 Jun 2022 06:12:25 +0000 (08:12 +0200)]
spi: Don't use the message queue if possible in spi_sync
The interaction with the controller message queue and its corresponding
auxiliary flags and variables requires the use of the queue_lock which is
costly. Since spi_sync will transfer the complete message anyway, and not
return until it is finished, there is no need to put the message into the
queue if the queue is empty. This can save a lot of overhead.
As an example of how significant this is, when using the MCP2518FD SPI CAN
controller on a i.MX8MM SoC, the time during which the interrupt line
stays active (during 3 relatively short spi_sync messages), is reduced
from 98us to 72us by this patch.
David Jander [Tue, 21 Jun 2022 06:12:24 +0000 (08:12 +0200)]
spi: Move ctlr->cur_msg_prepared to struct spi_message
This enables the possibility to transfer a message that is not at the
current tip of the async message queue.
This is in preparation of the next patch(es) which enable spi_sync messages
to skip the queue altogether.
Mark Brown [Mon, 13 Jun 2022 12:19:46 +0000 (13:19 +0100)]
spi: mpc52xx-psc: Switch to using core message queue
We deprecated open coding of the transfer queue back in 2017 so it's high
time we finished up converting drivers to use the standard message queue
code. The mpc52xx-psc driver is fairly straightforward so convert to use
transfer_one_message(), it looks like the driver would be a good fit for
transfer_one() with a little bit of updating but this smaller change seems
safer.
The driver seems like a good candidate for transfer_one() but the chip
select function is actually doing rather more than just updating the chip
select and both transfer_one() and transfer_one_message() are current APIs
so leave that refactoring for another day, ideally by someone with the
hardware.
Mark Brown [Fri, 10 Jun 2022 15:46:49 +0000 (16:46 +0100)]
spi: sh: Switch to using core message queue
We deprecated open coding of the transfer queue back in 2017 so it's high
time we finished up converting drivers to use the standard message queue
code. The SH driver is fairly straightforward so convert to use
transfer_one_message(), it looks like the driver would be a good fit for
transfer_one() with a little bit of updating but this smaller change seems
safer.
I'm not actually clear how the driver worked robustly previously, it
clears SSA and CR1 when queueing a transfer which looks like it would
interfere with any running transfer. This clearing has been moved to the
start of the message transfer function.
I'm also unclear how exactly the chip select is managed with this driver.
Serge Semin [Fri, 24 Jun 2022 21:06:23 +0000 (00:06 +0300)]
spi: dw: Add deferred DMA-channels setup support
Currently if the source DMA device isn't ready to provide the channels
capable of the SPI DMA transfers, the DW SSI controller will be registered
with no DMA support. It isn't right since all what the driver needs to do
is to postpone the probe procedure until the DMA device is ready. Let's
fix that in the framework of the DWC SSI generic DMA implementation. First
we need to use the dma_request_chan() method instead of the
dma_request_slave_channel() function, because the later one is deprecated
and most importantly doesn't return the failure cause but the
NULL-pointer. Second we need to stop the DW SSI controller probe procedure
if the -EPROBE_DEFER error is returned on the DMA initialization. The
procedure will resume later when the channels are ready to be requested.
Mark Brown [Wed, 22 Jun 2022 17:17:23 +0000 (18:17 +0100)]
regmap: Don't warn about cache only mode for devices with no cache
For devices with no cache it can make sense to use cache only mode as a
mechanism for trapping writes to hardware which is inaccessible but since
no cache is equivalent to cache bypass we force such devices into bypass
mode. This means that our check that bypass and cache only mode aren't both
enabled simultanously is less sensible for devices without a cache so relax
it.
Shengjiu Wang [Fri, 17 Jun 2022 07:44:37 +0000 (15:44 +0800)]
ASoC: fsl_sai: Configure dataline/FIFO information from dts property
The SAI has multiple successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive, so need
get such information from dts property "fsl,dataline"
fsl,dataline has 3 values for each configuration:
first one means the type: I2S(1) or DSD(2),
second one is dataline mask for 'rx',
third one is dataline mask for 'tx'.
Also set dma peripheral address and TRCE bits according to data lane.
Shengjiu Wang [Fri, 17 Jun 2022 07:44:36 +0000 (15:44 +0800)]
ASoC: dt-bindings: fsl-sai: Add new property to configure dataline
"fsl,dataline" is added to configure the dataline of SAI.
It has 3 value for each configuration, first one means the type:
I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is
dataline mask for 'tx'. for example:
fsl,dataline = <1 0xff 0xff 2 0xff 0x11>,
it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).
Shengjiu Wang [Fri, 17 Jun 2022 07:44:35 +0000 (15:44 +0800)]
ASoC: fsl_sai: Make res a member of struct fsl_sai
The resource info need to be accessed by hw_params()
function for multi fifo case, the start address may
be not the FIFO0. So move it to be a member of
struct fsl_sai.
Shengjiu Wang [Fri, 17 Jun 2022 07:44:34 +0000 (15:44 +0800)]
ASoc: fsl_sai: Add pinctrl operation for PDM and DSD
With DSD format, the pinctrl is different compare with
I2S format, because one dataline only has one channel
data, and the codec always mux the LRCLK pin to DSD
data line, and on i.MX8MQ the BCLK pin can route to
codec on DSD case for the MCLK is too high.
Add pinctrl operation that the pinctrl can be switched
on runtime according to the I2S format or DSD format
Shengjiu Wang [Fri, 17 Jun 2022 07:44:33 +0000 (15:44 +0800)]
ASoC: fsl_sai: Add support for more sample rates
Add support for more sample rates, because PDM format
bitstream has higher sample rates. for example DSD512
format, the bit clock is 22.5792MHz, if the word width
is U8_LE, then the max sample rate is 2822400.
Arnaud Ferraris [Tue, 21 Jun 2022 03:54:51 +0000 (22:54 -0500)]
ASoC: sun50i-codec-analog: Add support for internal bias
In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.
This patch enables or disables the internal bias resistor based on a
device tree property.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation; move to device probe] Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220621035452.60272-3-samuel@sholland.org Signed-off-by: Mark Brown <broonie@kernel.org>
Arnaud Ferraris [Tue, 21 Jun 2022 03:54:50 +0000 (22:54 -0500)]
ASoC: dt-bindings: sun50i-codec: Add binding for internal bias
In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.
This patch adds a device-tree property to the sun50i-codec-analog driver
to take advantage of this feature.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation patches] Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220621035452.60272-2-samuel@sholland.org Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Thu, 23 Jun 2022 12:52:49 +0000 (13:52 +0100)]
ASoC: zl38060: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:48 +0000 (13:52 +0100)]
ASoC: wl1273: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:47 +0000 (13:52 +0100)]
ASoC: tscs42xx: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:46 +0000 (13:52 +0100)]
ASoC: sti-sas: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:45 +0000 (13:52 +0100)]
ASoC: stac9766: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:44 +0000 (13:52 +0100)]
ASoC: si476x: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:43 +0000 (13:52 +0100)]
ASoC: sgtl5000: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:42 +0000 (13:52 +0100)]
ASoC: rk817: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:41 +0000 (13:52 +0100)]
ASoC: ml26124: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:40 +0000 (13:52 +0100)]
ASoC: mc13783: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:39 +0000 (13:52 +0100)]
ASoC: lochnagar: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:38 +0000 (13:52 +0100)]
ASoC: lm49453: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:37 +0000 (13:52 +0100)]
ASoC: jz4740: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:36 +0000 (13:52 +0100)]
ASoC: isabelle: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:35 +0000 (13:52 +0100)]
ASoC: Intel: avs: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:34 +0000 (13:52 +0100)]
ASoC: inno_rk3036: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:33 +0000 (13:52 +0100)]
ASoC: ics43432: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:32 +0000 (13:52 +0100)]
ASoC: hdmi-codec: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:31 +0000 (13:52 +0100)]
ASoC: hdac_hdmi: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:30 +0000 (13:52 +0100)]
ASoC: gtm601: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:29 +0000 (13:52 +0100)]
ASoC: dmic: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:28 +0000 (13:52 +0100)]
ASoC: cx20442: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:27 +0000 (13:52 +0100)]
ASoC: cq93vc: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:26 +0000 (13:52 +0100)]
ASoC: cpcap: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:25 +0000 (13:52 +0100)]
ASoC: bt-sco: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:24 +0000 (13:52 +0100)]
ASoC: bd28623: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:23 +0000 (13:52 +0100)]
ASoC: ads117x: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:22 +0000 (13:52 +0100)]
ASoC: ac97: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:21 +0000 (13:52 +0100)]
ASoC: ab8500: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:20 +0000 (13:52 +0100)]
ASoC: 88pm860x: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:19 +0000 (13:52 +0100)]
ASoC: wm*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:18 +0000 (13:52 +0100)]
ASoC: uda*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:17 +0000 (13:52 +0100)]
ASoC: twl*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Jiri Slaby [Tue, 14 Jun 2022 09:05:36 +0000 (11:05 +0200)]
tty/vt: consolemap: remove dflt reset from con_do_clear_unimap()
con_do_clear_unimap() sets dflt to NULL and then calls
con_release_unimap() which does the very same as the first thing. So
remove the former as it is apparently superfluous.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_GET() and GENMASK() helpers instead of direct shifts and ANDs.
This makes the code even more obvious. I didn't know about the helpers
at the time of writing the macros.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename
and document struct uni_pagedir), rename also the members of struct
vc_data. I.e. pagedir -> pagedict. And while touching all the places,
remove also the unnecessary vc_ prefix.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Tue, 14 Jun 2022 09:05:33 +0000 (11:05 +0200)]
tty/vt: consolemap: saner variable names in set_inverse_transl()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.
Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...
This is a lot of shuffling, but the result pays off, IMO.
Charles Keepax [Thu, 23 Jun 2022 12:52:16 +0000 (13:52 +0100)]
ASoC: tlv320*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Jiri Slaby [Tue, 14 Jun 2022 09:05:30 +0000 (11:05 +0200)]
tty/vt: consolemap: use ARRAY_SIZE(), part II.
The code still uses constants (macros) as bounds in loops after commit 17945d317a52 (tty/vt: consolemap: use ARRAY_SIZE()). The contants are at
least macros used also in the definition of the arrays. But use
ARRAY_SIZE() on two more places to ensure the loops never run out of
bounds even if the array definition change.
Charles Keepax [Thu, 23 Jun 2022 12:52:15 +0000 (13:52 +0100)]
ASoC: tfa*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:14 +0000 (13:52 +0100)]
ASoC: tas*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:13 +0000 (13:52 +0100)]
ASoC: sta*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:12 +0000 (13:52 +0100)]
ASoC: ssm*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:11 +0000 (13:52 +0100)]
ASoC: spdif: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:10 +0000 (13:52 +0100)]
ASoC: rt*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:09 +0000 (13:52 +0100)]
ASoC: pcm*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:08 +0000 (13:52 +0100)]
ASoC: nau*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:07 +0000 (13:52 +0100)]
ASoC: msm*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:06 +0000 (13:52 +0100)]
ASoC: max*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:05 +0000 (13:52 +0100)]
ASoC: es*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:04 +0000 (13:52 +0100)]
ASoC: da*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:03 +0000 (13:52 +0100)]
ASoC: cs*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:02 +0000 (13:52 +0100)]
ASoC: alc*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:01 +0000 (13:52 +0100)]
ASoC: ak*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Charles Keepax [Thu, 23 Jun 2022 12:52:00 +0000 (13:52 +0100)]
ASoC: ad*: Remove now redundant non_legacy_dai_naming flag
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
projects / people / ms / linux.git / log
