Takashi Iwai [Tue, 21 Jun 2022 12:00:44 +0000 (14:00 +0200)]
ALSA: hda: Fix discovery of i915 graphics PCI device
It's been reported that the recent fix for skipping the
component-binding with D-GPU caused a regression on some systems; it
resulted in the completely missing component binding with i915 GPU.
The problem was the use of pci_get_class() function. It matches with
the full PCI class bits, while we want to match only partially the PCI
base class bits. So, when a system has an i915 graphics device with
the PCI class 0380, it won't hit because we're looking for only the
PCI class 0300.
This patch fixes i915_gfx_present() to look up each PCI device and
match with PCI base class explicitly instead of pci_get_class().
drm/aperture: Run fbdev removal before internal helpers
Always run fbdev removal first to remove simpledrm via
sysfb_disable(). This clears the internal state. The later call
to drm_aperture_detach_drivers() then does nothing. Otherwise,
with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Yu Xiao [Mon, 20 Jun 2022 10:39:12 +0000 (12:39 +0200)]
nfp: compose firmware file name with new hwinfo "nffw.partno"
During initialization of the NFP driver, a file name for loading
application firmware is composed using the NIC's AMDA information and port
type (count and speed). E.g.: "nic_AMDA0145-1012_2x10.nffw".
In practice there may be many variants for each NIC type, and many of the
variants relate to assembly components which do not concern the driver and
application firmware implementation. Yet the current scheme leads to a
different application firmware file name for each variant, because they
have different AMDA information.
To reduce proliferation of content-duplicated application firmware images
or symlinks, the NIC's management firmware will only expose differences
between variants that need different application firmware via a newly
introduced hwinfo, "nffw.partno".
Use of the existing hwinfo, "assembly.partno", is maintained in order to
support for NICs with management firmware that does not expose
"nffw.partno".
Alan Stern [Mon, 13 Jun 2022 14:17:03 +0000 (10:17 -0400)]
usb: gadget: Fix non-unique driver names in raw-gadget driver
In a report for a separate bug (which has already been fixed by commit 5f0b5f4d50fa "usb: gadget: fix race when gadget driver register via
ioctl") in the raw-gadget driver, the syzbot console log included
error messages caused by attempted registration of a new driver with
the same name as an existing driver:
> kobject_add_internal failed for raw-gadget with -EEXIST, don't try to register things with the same name in the same directory.
> UDC core: USB Raw Gadget: driver registration failed: -17
> misc raw-gadget: fail, usb_gadget_register_driver returned -17
These errors arise because raw_gadget.c registers a separate UDC
driver for each of the UDC instances it creates, but these drivers all
have the same name: "raw-gadget". Until recently this wasn't a
problem, but when the "gadget" bus was added and UDC drivers were
registered on this bus, it became possible for name conflicts to cause
the registrations to fail. The reason is simply that the bus code in
the driver core uses the driver name as a sysfs directory name (e.g.,
/sys/bus/gadget/drivers/raw-gadget/), and you can't create two
directories with the same pathname.
To fix this problem, the driver names used by raw-gadget are made
distinct by appending a unique ID number: "raw-gadget.N", with a
different value of N for each driver instance. And to avoid the
proliferation of error handling code in the raw_ioctl_init() routine,
the error return paths are refactored into the common pattern (goto
statements leading to cleanup code at the end of the routine).
Link: https://lore.kernel.org/all/0000000000008c664105dffae2eb@google.com/ Fixes: fc274c1e9973 "USB: gadget: Add a new bus for gadgets" CC: Andrey Konovalov <andreyknvl@gmail.com> CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+02b16343704b3af1667e@syzkaller.appspotmail.com Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YqdG32w+3h8c1s7z@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Mon, 20 Jun 2022 14:17:30 +0000 (16:17 +0200)]
netfilter: nf_dup_netdev: do not push mac header a second time
Eric reports skb_under_panic when using dup/fwd via bond+egress hook.
Before pushing mac header, we should make sure that we're called from
ingress to put back what was pulled earlier.
In egress case, the MAC header is already there; we should leave skb
alone.
While at it be more careful here: skb might have been altered and
headroom reduced, so add a skb_cow() before so that headroom is
increased if necessary.
nf_do_netdev_egress() assumes skb ownership (it normally ends with
a call to dev_queue_xmit), so we must free the packet on error.
Fixes: f87b9464d152 ("netfilter: nft_fwd_netdev: Support egress hook") Reported-by: Eric Garver <eric@garver.life> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jie2x Zhou [Thu, 16 Jun 2022 07:40:46 +0000 (15:40 +0800)]
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
Before change:
make -C netfilter
TEST: performance
net,port [SKIP]
perf not supported
port,net [SKIP]
perf not supported
net6,port [SKIP]
perf not supported
port,proto [SKIP]
perf not supported
net6,port,mac [SKIP]
perf not supported
net6,port,mac,proto [SKIP]
perf not supported
net,mac [SKIP]
perf not supported
After change:
net,mac [ OK ]
baseline (drop from netdev hook): 2061098pps
baseline hash (non-ranged entries): 1606741pps
baseline rbtree (match on first field only): 1191607pps
set with 1000 full, ranged entries: 1639119pps
ok 8 selftests: netfilter: nft_concat_range.sh
Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge tag 'fpga-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
Here is the first set of FPGA changes for 5.20-rc1
FPGA static firmware loader
- Russ's change to add support for Intel MAX10 BMC Secure
Update driver which instantiates the new Firmware Upload
functionality (merged on last cycle) of the Firmware
Loader.
DFL
- keliu's change to use ida_alloc()/ida_free() instead of
deprecated ida_simple_get()/ida_simple_remove()
ALTERA
- Marco's change to fix a "comparison with less than zero"
warning
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: altera-pr-ip: fix unsigned comparison with less than zero
fpga: Directly use ida_alloc()/free()
fpga: m10bmc-sec: add max10 secure update functions
fpga: m10bmc-sec: expose max10 canceled keys in sysfs
fpga: m10bmc-sec: expose max10 flash update count
fpga: m10bmc-sec: create max10 bmc secure update
mfd: intel-m10-bmc: Rename n3000bmc-secure driver
Ping-Ke Shih [Mon, 13 Jun 2022 06:51:44 +0000 (14:51 +0800)]
wifi: rtw89: 8852a: rfk: fix div 0 exception
The DPK is a kind of RF calibration whose algorithm is to fine tune
parameters and calibrate, and check the result. If the result isn't good
enough, it could adjust parameters and try again.
This issue is to read and show the result, but it could be a negative
calibration result that causes divisor 0 and core dump. So, fix it by
phy_div() that does division only if divisor isn't zero; otherwise,
zero is adopted.
TX BD (TX ring index) and TX WD (WiFi descriptor buffer) are freed
asynchronously. With burst packets, we free TX WD, but the corresponding
TX BD couldn't be freed yet. Then, TX can possibly get stuck due to no
more TX BD.
To avoid this, ignore reclaiming TX BD only if TX WD is no free space,
because at this moment TX BD must have some spaces. Otherwise, we reclaim
TX BD to resolve TX stuck issue.
Ping-Ke Shih [Fri, 10 Jun 2022 07:26:08 +0000 (15:26 +0800)]
wifi: rtw89: fix long RX latency in low power mode
In low power mode, regular IO is power off, so we don't schedule napi to
poll RX and TX completion. Therefore, calling ieee80211_rx_napi() with
napi instance causes long RX latency. To fix this, use NULL as argument,
and then it can use netif_receive_skb_list() to receive.
Ping-Ke Shih [Fri, 10 Jun 2022 07:26:07 +0000 (15:26 +0800)]
wifi: rtw89: drop invalid TX rate report of legacy rate
Somehow, firmware could report invalid TX rate, and we consider the
invalid rate as 0 that will make a wrong decision. So, drop invalid
reports, and also suppress the warning message.
Ping-Ke Shih [Fri, 10 Jun 2022 07:26:06 +0000 (15:26 +0800)]
wifi: rtw89: add UNEXP debug mask to keep monitor messages unexpected to happen frequently
Some warning messages could bother users. With proper handling, these
situations don't really affect usage, but we still need to keep monitor
these messages. If they happen frequently, we must review driver or
hardware design to clarify.
Kuan-Chung Chen [Fri, 10 Jun 2022 07:26:05 +0000 (15:26 +0800)]
wifi: rtw89: enable VO TX AMPDU
To improve VO throughput, we enable VO TX AMPDU.
We measure the latency of enable or disable VO TX AMPDU. The experimental
results show that the difference between the two is insignificant only
300µs, so the little impact can be ignored for user experience.
Moreover, we found some APs will have a group key handshake timeout issue
when the EAPOL's TID is already setup BA session. Therefore, when
transmitting EAPOL, if EAPOL's TID BA session is already setup, we need
to delete it.
Kuan-Chung Chen [Fri, 10 Jun 2022 07:26:04 +0000 (15:26 +0800)]
wifi: rtw89: fix potential TX stuck
The potential TX stuck occurs when there are lots of packets to be
transmitted and the boundary of the tx_resource is hit. Add this
patch to avoid the TX stuck when burst traffic.
Ping-Ke Shih [Fri, 10 Jun 2022 07:26:02 +0000 (15:26 +0800)]
wifi: rtw89: allocate BSSID CAM per TDLS peer
In STA mode, if peer is TDLS. Allocate a BSSID CAM entry with peer's
address to match address properly, and then hardware can ACK peer's
packets and receive packets to driver.
Ping-Ke Shih [Fri, 10 Jun 2022 07:26:01 +0000 (15:26 +0800)]
wifi: rtw89: separate BSSID CAM operations
Normally, we allocate a BSSID CAM to a vif. By hardware design, we must
allocate a BSSID CAM to each TDLS peer, so separate BSSID CAM operations
that will be used by later patches.
Alexey Kodanev [Wed, 8 Jun 2022 17:16:14 +0000 (20:16 +0300)]
wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()
As a result of the execution of the inner while loop, the value
of 'idx' can be equal to LINK_QUAL_MAX_RETRY_NUM. However, this
is not checked after the loop and 'idx' is used to write the
LINK_QUAL_MAX_RETRY_NUM size array 'lq_cmd->rs_table[idx]' below
in the outer loop.
The fix is to check the new value of 'idx' inside the nested loop,
and break both loops if index equals the size. Checking it at the
start is now pointless, so let's remove it.
Stephen Boyd [Thu, 2 Jun 2022 19:06:21 +0000 (12:06 -0700)]
arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar
The sc7180-trogdor-{lazor,homestar}-*.dtsi files all include
sc7180-trogdor.dtsi and sc7180-trogdor-lazor.dtsi or
sc7180-trogdor-homestar.dtsi, so including it here in the
sc7180-trogdor-{lazor,homestar}.dtsi file means we have a duplicate
include after commit 19794489fa24 ("arm64: dts: qcom: Only include
sc7180.dtsi in sc7180-trogdor.dtsi"). We include the sc7180-trogdor.dtsi
file in a board like sc7180-trogdor-lazor-r1.dts so that we can include
the display bridge snippet (e.g. sc7180-trogdor-ti-sn65dsi86.dtsi)
instead of making ever increasing variants like
sc7180-trogdor-lazor-ti-sn65dsi86.dtsi.
Unfortunately, having the double include like this means the display
bridge's i2c bus is left disabled instead of enabled by the bridge
snippet. Any boards that use the i2c bus for the display bridge will
have the bus disabled when we include sc7180-trogdor.dtsi the second
time, which picks up the i2c status="disabled" line from sc7180.dtsi.
This leads to the display not turning on and black screens at boot on
lazor and homestar devices.
Fix this by dropping the include and making a note that the
sc7180-trogdor-{lazor,homestar}.dtsi file must be included after
sc7180-trogdor.dtsi
Reported-by: Douglas Anderson <dianders@chromium.org> Cc: "Joseph S. Barrera III" <joebar@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Fixes: 19794489fa24 ("arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220602190621.1646679-1-swboyd@chromium.org
Xiu Jianfeng [Fri, 17 Jun 2022 09:44:12 +0000 (17:44 +0800)]
selinux: selinux_add_opt() callers free memory
The selinux_add_opt() function may need to allocate memory for the
mount options if none has already been allocated, but there is no
need to free that memory on error as the callers handle that. Drop
the existing kfree() on error to help increase consistency in the
selinux_add_opt() error handling.
This patch also changes selinux_add_opt() to return -EINVAL when
the mount option value, @s, is NULL. It currently return -ENOMEM.
This is the next iteration of the patch. It includes changes suggested
by Song, Joanne and Alexei. Please find updated intro message and
change log below.
This patch implements inlining of calls to bpf_loop helper function
when bpf_loop's callback is statically known. E.g. the rewrite does
the following transformation during BPF program processing:
bpf_loop(10, foo, NULL, 0);
->
for (int i = 0; i < 10; ++i)
foo(i, NULL);
The transformation leads to measurable latency change for simple
loops. Measurements using `benchs/run_bench_bpf_loop.sh` inside QEMU /
KVM on i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.
The change is split in five parts:
* Update to test_verifier.c to specify expected and unexpected
instruction sequences. This allows to check BPF program rewrites
applied by e.g. do_mix_fixups function.
* Update to test_verifier.c to specify BTF function infos and types
per test case. This is necessary for tests that load sub-program
addresses to a variable because of the checks applied by
check_ld_imm function.
* The update to verifier.c that tracks state of the parameters for
each bpf_loop call in a program and decides whether it could be
replaced by a loop.
* A set of test cases for `test_verifier` that use capabilities added
by the first two patches to verify instructions produced by inlining
logic.
* Two test cases for `test_prog` to check that possible corner cases
behave as expected.
Additional details are available in commit messages for each patch.
Changes since v7:
- Call to `mark_chain_precision` is added in `loop_flag_is_zero` to
avoid potential issues with state pruning and precision tracking.
- `flags non-zero` test_verifier test case is updated to have two
execution paths reaching `bpf_loop` call, one with flags = 0,
another with flags = 1. Potentially this test case should be able
to show that call to `mark_chain_precision` is necessary in
`loop_flag_is_zero` but not at the moment. Please refer to
discussion for [PATCH bpf-next v7 3/5] for additional details.
- `stack_depth_extra` computation is updated to guarantee that R6, R7
and R8 offsets are always aligned on 8 byte boundary.
- `stack locations for loop vars` test_verifier test case updated to
show that R6, R7, R8 offsets are indeed aligned when function stack
depth is not a multiple of 8.
- I removed Song Liu's ACK from commit message for [PATCH bpf-next v8
4/5] because I updated the patch. (Please let me know if I had to
keep the ACK tag).
Changes since v6:
- Return value of the `optimize_bpf_loop` function is no longer
ignored. This is necessary to properly propagate -ENOMEM error.
Changes since v5:
- Added function `loop_flag_is_zero` to skip a few checks in
`update_loop_inline_state` when loop instruction is not fit for
inline.
Changes since v4:
- Added missing `static` modifier for `update_loop_inline_state` and
`inline_bpf_loop` functions.
- `update_loop_inline_state` updated for better readability.
- Fields `initialized` and `fit_for_inline` of `struct
bpf_loop_inline_state` are changed back from `bool` to bitfields.
- Acks from Song Liu added to comments for patches 1/5, 2/5, 4/5,
5/5.
Changes since v3:
- Function `adjust_stack_depth_for_loop_inlining` is replaced by
function `optimize_bpf_loop`. Function `optimize_bpf_loop` is
responsible for both stack depth adjustment and call instruction
replacement.
- Changes in `do_misc_fixups` are reverted.
- Changes in `adjust_subprog_starts_after_remove` are reverted and
function `adjust_loop_inline_subprogno` is removed. This is
possible because call to `optimize_bpf_loop` is placed before the
dead code removal in `opt_remove_dead_code` (in contrast to the
position of `do_misc_fixups` where inlining was done in v3).
- Field `bpf_insn_aux_data.loop_inline_state` is now a part of
anonymous union at the start of the `bpf_insn_aux_data`.
- Data structure `bpf_loop_inline_state` is simplified to use single
flag field `fit_for_inline` instead of separate fields
`flags_is_zero` & `callback_is_constant`.
- Macro definition `BPF_MAX_LOOPS` is moved from
`include/linux/bpf_verifier.h` to `include/linux/bpf.h` to avoid
include of `include/linux/bpf_verifier.h` in `bpf_iter.c`.
- `inline_bpf_loop` changed back to use array initialization and hard
coded offsets as in v2.
- Style / formatting updates.
Changes since v2:
- fix for `stack_check` test case in `test_progs-no_alu32`, all tests
are passing now;
- v2 3/3 patch is split in three parts:
- kernel changes
- test_verifier changes
- test_prog changes
- updated `inline_bpf_loop` in `verifier.c` to calculate each offset
used in instructions to avoid "magic" numbers;
- removed newline handling logic in `fail_log` branch of
`do_single_test` in `test_verifier.c` to simplify the patch set;
- styling fixes suggested in review for v2 of this patch set.
Changes since v1:
- allow to use SKIP_INSNS in instruction pattern specification in
test_verifier tests;
- fix for a bug in spill offset assignement for loop vars when
bpf_loop is located in a non-main function.
====================
Eduard Zingerman [Mon, 20 Jun 2022 23:53:44 +0000 (02:53 +0300)]
selftests/bpf: BPF test_prog selftests for bpf_loop inlining
Two new test BPF programs for test_prog selftests checking bpf_loop
behavior. Both are corner cases for bpf_loop inlinig transformation:
- check that bpf_loop behaves correctly when callback function is not
a compile time constant
- check that local function variables are not affected by allocating
additional stack storage for registers spilled by loop inlining
Eduard Zingerman [Mon, 20 Jun 2022 23:53:43 +0000 (02:53 +0300)]
selftests/bpf: BPF test_verifier selftests for bpf_loop inlining
A number of test cases for BPF selftests test_verifier to check how
bpf_loop inline transformation rewrites the BPF program. The following
cases are covered:
- happy path
- no-rewrite when flags is non-zero
- no-rewrite when callback is non-constant
- subprogno in insn_aux is updated correctly when dead sub-programs
are removed
- check that correct stack offsets are assigned for spilling of R6-R8
registers
Eduard Zingerman [Mon, 20 Jun 2022 23:53:42 +0000 (02:53 +0300)]
bpf: Inline calls to bpf_loop when callback is known
Calls to `bpf_loop` are replaced with direct loops to avoid
indirection. E.g. the following:
bpf_loop(10, foo, NULL, 0);
Is replaced by equivalent of the following:
for (int i = 0; i < 10; ++i)
foo(i, NULL);
This transformation could be applied when:
- callback is known and does not change during program execution;
- flags passed to `bpf_loop` are always zero.
Inlining logic works as follows:
- During execution simulation function `update_loop_inline_state`
tracks the following information for each `bpf_loop` call
instruction:
- is callback known and constant?
- are flags constant and zero?
- Function `optimize_bpf_loop` increases stack depth for functions
where `bpf_loop` calls can be inlined and invokes `inline_bpf_loop`
to apply the inlining. The additional stack space is used to spill
registers R6, R7 and R8. These registers are used as loop counter,
loop maximal bound and callback context parameter;
Measurements using `benchs/run_bench_bpf_loop.sh` inside QEMU / KVM on
i7-4710HQ CPU show a drop in latency from 14 ns/op to 2 ns/op.
Eduard Zingerman [Mon, 20 Jun 2022 23:53:40 +0000 (02:53 +0300)]
selftests/bpf: specify expected instructions in test_verifier tests
Allows to specify expected and unexpected instruction sequences in
test_verifier test cases. The instructions are requested from kernel
after BPF program loading, thus allowing to check some of the
transformations applied by BPF verifier.
- `expected_insn` field specifies a sequence of instructions expected
to be found in the program;
- `unexpected_insn` field specifies a sequence of instructions that
are not expected to be found in the program;
- `INSN_OFF_MASK` and `INSN_IMM_MASK` values could be used to mask
`off` and `imm` fields.
- `SKIP_INSNS` could be used to specify that some instructions in the
(un)expected pattern are not important (behavior similar to usage of
`\t` in `errstr` field).
Here it is expected that move of 1 to register 1 would remain in place
and helper function call instruction would be replaced by a relative
call instruction.
Meraki MR26 is an EOL wireless access point featuring a
PoE ethernet port and two dual-band 3x3 MIMO 802.11n
radios and 1x1 dual-band WIFI dedicated to scanning.
Thank you Amir for the unit and PSU.
Hardware info:
SOC : Broadcom BCM53015A1KFEBG (dual-core Cortex-A9 CPU at 800 MHz)
RAM : SK Hynix Inc. H5TQ1G63EFR, 1 GBit DDR3 SDRAM = 128 MiB
NAND : Spansion S34ML01G100TF100, 1 GBit SLC NAND Flash = 128 MiB
ETH : 1 GBit Ethernet Port - PoE (TPS23754 PoE Interface)
WIFI0 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI2 : Broadcom BCM43428 "Air Marshal" 802.11 abgn (1x1:1)
BUTTON: One reset key behind a small hole next to the Ethernet Port
LEDS : One amber (fault), one white (indicator) LED, separate RGB-LED
MISC : Atmel AT24C64 8KiB EEPROM i2c
: Ti INA219 26V, 12-bit, i2c output current/voltage/power monitor
SERIAL:
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
The Serial setting is 115200-8-N-1. The board has a populated
right angle 1x4 0.1" pinheader.
The pinout is: VCC (next to J3, has the pin 1 indicator), RX, TX, GND.
Odd stuff:
- uboot does not support lzma compression, but gzip'd uImage/DTB work.
- uboot claims to support FIT, but fails to pass the DTB to the kernel.
Appending the dtb after the kernel image works.
- RGB-controller is supported through an external userspace program.
- The ubi partition contains a "board-config" volume. It stores the
MAC Address (0x66 in binary) and Serial No. (0x7c alpha-numerical).
- SoC's temperature sensor always reports that it is on fire.
This causes the system to immediately shutdown! Looking at reported
"418 degree Celsius" suggests that this sensor is not working.
WIFI:
b43 is able to initialize all three WIFIs @ 802.11bg.
| b43-phy0: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
| b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy0 warning: 5 GHz band is unsupported on this PHY
| b43-phy1: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x812
| b43-phy1: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy1: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy1 warning: 5 GHz band is unsupported on this PHY
| b43-phy2: Broadcom 43228 WLAN found (core revision 30)
| bcma-pci-bridge 0002:01:00.0: bus3: Switched to core: 0x812
| b43-phy2: Found PHY: Analog 9, Type 4 (N), Revision 16
| b43-phy2: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
| Broadcom 43xx driver loaded [ Features: NL ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
"BCM53011 and BCM53015 with dual-core Cortex-A9 CPU at 800 MHz,
256KB L2 cache, 16-bit DDR2 interface, USB3, integrated switch,
GPHYs and packet accelerator"
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Alex Deucher [Thu, 16 Jun 2022 20:35:38 +0000 (16:35 -0400)]
drm/amdgpu/display: drop set but unused variable
Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9143:27: warning: variable 'abo' set but not used [-Wunused-but-set-variable]
Steve French [Sat, 18 Jun 2022 22:24:23 +0000 (17:24 -0500)]
smb3: fix empty netname context on secondary channels
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB).
Fixes: 4c14d7043fede ("cifs: populate empty hostnames for extra channels") Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
filemap: Handle sibling entries in filemap_get_read_batch()
If a read races with an invalidation followed by another read, it is
possible for a folio to be replaced with a higher-order folio. If that
happens, we'll see a sibling entry for the new folio in the next iteration
of the loop. This manifests as a NULL pointer dereference while holding
the RCU read lock.
Handle this by simply returning. The next call will find the new folio
and handle it correctly. The other ways of handling this rare race are
more complex and it's just not worth it.
Reported-by: Dave Chinner <david@fromorbit.com> Reported-by: Brian Foster <bfoster@redhat.com> Debugged-by: Brian Foster <bfoster@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
filemap: Correct the conditions for marking a folio as accessed
We had an off-by-one error which meant that we never marked the first page
in a read as accessed. This was visible as a slowdown when re-reading
a file as pages were being evicted from cache too soon. In reviewing
this code, we noticed a second bug where a multi-page folio would be
marked as accessed multiple times when doing reads that were less than
the size of the folio.
Abstract the comparison of whether two file positions are in the same
folio into a new function, fixing both of these bugs.
Reported-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Jiri Vanek [Wed, 15 Jun 2022 22:22:21 +0000 (00:22 +0200)]
drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation
Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.
Jiri Vanek [Wed, 15 Jun 2022 22:22:20 +0000 (00:22 +0200)]
drm/bridge/tc358775: Return before displaying inappropriate error message
Function for reading from i2c device register displays error message even
if reading ends correctly. Add return to avoid falling through into
the fail label.
Liu Ying [Sat, 11 Jun 2022 14:14:19 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB support for i.MX8qm
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards. The two channels can be used
simultaneously, either in dual mode or split mode. In dual mode, the
two channels output identical data. In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels. This patch supports the
LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:18 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB support for i.MX8qxp
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards. The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display. The channel indexes have to be
different. Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:16 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB driver helper support
This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs. Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:15 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
This patch adds a drm bridge driver for i.MX8qxp pixel link to display
pixel interface(PXL2DPI). The PXL2DPI interfaces the pixel link 36-bit
data output and the DSI controller’s MIPI-DPI 24-bit data input, and
inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap
the pixel color codings between those modules. The PXL2DPI is purely
combinatorial.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:13 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link.
The pixel link forms a standard asynchronous linkage between
pixel sources(display controller or camera module) and pixel
consumers(imaging or displays). It consists of two distinct
functions, a pixel transfer function and a control interface.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:11 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:09 +0000 (22:14 +0800)]
media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO,
RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp
pixel combiner. The RGB pixels with padding low per component are
transmitted on a 30-bit input bus(10-bit per component) from a display
controller or a 36-bit output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-3-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:08 +0000 (22:14 +0800)]
media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com
Make it possible to walk the children of an ACPI device in the revese
order by defining acpi_dev_for_each_child_reverse() in analogy with
acpi_dev_for_each_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ACPI: property: Use acpi_dev_for_each_child() for child lookup
Instead of using the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to find the next child of a given
ACPI device.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
Instead of walking the list of children of an ACPI device directly
in order to find the child matching a given bus address, use
acpi_find_child_by_adr() for this purpose.
Also notice that if acpi_find_child_by_adr() doesn't find a matching
child, acpi_find_child_device() will not find it too, so directly
replace usb_acpi_find_port() in usb_acpi_get_companion_for_port() with
acpi_find_child_by_adr() and drop it entirely.
Apart from simplifying the code, this will help to eliminate the
children list head from struct acpi_device as it is redundant and it
is used in questionable ways in some places (in particular, locking is
needed for walking the list pointed to it safely, but it is often
missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
Use acpi_find_child_by_adr() to find the child matching a given bus
address instead of tb_acpi_find_port() that walks the list of children
of an ACPI device directly for this purpose and drop the latter.
Apart from simplifying the code, this will help to eliminate the
children list head from struct acpi_device as it is redundant and it
is used in questionable ways in some places (in particular, locking is
needed for walking the list pointed to it safely, but it is often
missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Rearrange the ACPI device lookup code used internally by
acpi_find_child_device() so it can avoid extra checks after finding
one object with a matching _ADR and use it for defining
acpi_find_child_by_adr() that will allow the callers to find a given
ACPI device's child matching a given bus address without doing any
other checks in check_one_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Define acpi_dev_has_children() as a wrapper around
acpi_dev_for_each_child() and use it to check if the given ACPI
device has any children instead of checking the children list
head in struct acpi_device.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Yihao Han [Wed, 8 Jun 2022 11:43:25 +0000 (04:43 -0700)]
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
clk_disable() already checks the clk ptr using IS_ERR_OR_NULL(clk) and
clk_enable() checks the clk ptr using !clk, so there is no need to check clk
ptr again before calling them.
Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
Hyunwoo Kim [Mon, 20 Jun 2022 14:17:46 +0000 (07:17 -0700)]
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int. Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Samuel Holland [Mon, 11 Apr 2022 04:40:01 +0000 (23:40 -0500)]
dt-bindings: clock: Add compatible for D1 DE2 clocks
Allwinner D1 contains a display engine 2.0. Its clock controller
matches the layout of the H5 DE2 clocks (2 mixers, no rotation engine,
and separate resets), so use that compatible as a fallback.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220411044002.37579-1-samuel@sholland.org
context_tracking: Add a note about noinstr VS unsafe context tracking functions
Some context tracking functions enter or exit into/from RCU idle mode
while using trace-able and lockdep-aware IRQs (un-)masking. As a result
those functions can't get tagged as noinstr. This is unlikely to be
fixed since these are obsolete APIs. Drop a note about this matter.
[ paulmck: Apply Peter Zijlstra feedback. ]
Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Animesh Manna [Mon, 20 Jun 2022 06:51:38 +0000 (12:21 +0530)]
drm/i915/bios: calculate panel type as per child device index in VBT
Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.
v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Willy Tarreau [Sat, 28 May 2022 15:45:46 +0000 (17:45 +0200)]
tools/nolibc: add a help target to list supported targets
The "help" target simply presents the list of supported targets
and the current set of variables being used to build the sysroot.
Since the help in tools/ suggests to use "install", which is
supported by most tools while such a target is not really relevant
here, an "install" target was also added, redirecting to "help".
Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Willy Tarreau [Sat, 28 May 2022 15:45:45 +0000 (17:45 +0200)]
tools/nolibc: make the default target build the headers
The help in "make -C tools" enumerates nolibc as a valid target so we
must at least make it do something. Let's make it do the equivalent
of "make headers" in that it will prepare a sysroot with the arch's
headers, but will not install the kernel's headers. This is the
minimum some tools will need when built with a full-blown toolchain
anyway.
Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Willy Tarreau [Sat, 28 May 2022 15:45:44 +0000 (17:45 +0200)]
tools/nolibc: fix the makefile to also work as "make -C tools ..."
As reported by Linus, the nolibc's makefile is currently broken when
invoked as per the documented method (make -C tools nolibc_<target>),
because it now relies on the ARCH and OUTPUT variables that are not
set in this case.
This patch addresses this by sourcing subarch.include, and by
presetting OUTPUT to the current directory if not set. This is
sufficient to make the commands work both as a standalone target
and as a tools/ sub-target.
Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
tools/nolibc/stdio: Add format attribute to enable printf warnings
When we use printf and fprintf functions from the nolibc, we don't
get any warning from the compiler if we have the wrong arguments.
For example, the following calls will compile silently:
```
printf("%s %s\n", "aaa");
fprintf(stdout, "%s %s\n", "xxx", 1);
```
(Note the wrong arguments).
Those calls are undefined behavior. The compiler can help us warn
about the above mistakes by adding a `printf` format attribute to
those functions declaration. This patch adds it, and now it yields
these warnings for those mistakes:
```
warning: format `%s` expects a matching `char *` argument [-Wformat=]
warning: format `%s` expects argument of type `char *`, but argument 4 has type `int` [-Wformat=]
```
[ ammarfaizi2: Simplify the attribute placement. ]
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org> Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ammar Faizi [Thu, 19 May 2022 17:21:15 +0000 (00:21 +0700)]
tools/nolibc/stdlib: Support overflow checking for older compiler versions
Previously, we used __builtin_mul_overflow() to check for overflow in
the multiplication operation in the calloc() function. However, older
compiler versions don't support this built-in. This patch changes the
overflow checking mechanism to make it work on any compiler version
by using a division method to check for overflow. No functional change
intended. While in there, remove the unused variable `void *orig`.
Link: https://lore.kernel.org/lkml/20220330024114.GA18892@1wt.eu Suggested-by: Willy Tarreau <w@1wt.eu> Cc: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org> Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Acked-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
drm/i915/display: Re-add check for low voltage sku for max dp source rate
This reverts commit 73867c8709b5 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.
Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.
Bisection traced it back to this commit, which makes sense given the
issues.
Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.
Fixes: 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
(cherry picked from commit d5929835080a60f9119d024fa42f315913942f76) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Paul E. McKenney [Wed, 18 May 2022 04:00:04 +0000 (21:00 -0700)]
rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit()
This commit applies the "noinstr" tag to the rcu_idle_enter() and
rcu_idle_exit() functions, which are invoked from portions of the idle
loop that cannot be instrumented. These tags require reworking the
rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions
invoke in order to cause them to use normal assertions rather than
lockdep. In addition, within rcu_idle_exit(), the raw versions of
local_irq_save() and local_irq_restore() are used, again to avoid issues
with lockdep in uninstrumented code.
This patch is based in part on an earlier patch by Jiri Olsa, discussions
with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas
Gleixner, and off-list discussions with Yonghong Song.
Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/ Reported-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Alexei Starovoitov <ast@kernel.org> Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Yonghong Song <yhs@fb.com>
rcu: Dump rcuc kthread status for CPUs not reporting quiescent state
If the rcutree.use_softirq kernel boot parameter is disabled, then it is
possible that a RCU CPU stall is due to the rcuc kthreads being starved of
CPU time. There is currently no easy way to infer this from the RCU CPU
stall warning output. This commit therefore adds a string of the form "
rcuc=%ld jiffies(starved)" to a given CPU's output if the corresponding
rcuc kthread has been starved for more than two seconds.
[ paulmck: Eliminate extraneous space characters. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests
Use exception fixup to verify VMCALL/RDMSR/WRMSR fault as expected in the
Hyper-V Features test.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul E. McKenney [Tue, 12 Apr 2022 22:17:37 +0000 (15:17 -0700)]
torture: Make kvm-remote.sh announce which system is being waited on
If a remote system fails in certain ways, for example, if it is rebooted
without removing the contents of the /tmp directory, its remote.run file
never will be removed and the kvm-remote.sh script will loop waiting
forever. The manual workaround for this (hopefully!) rare event is to
manually remove the file, which will cause the results up to the reboot
to be collected and evaluated.
Unfortunately, to work out which system is holding things up, the user
must refer to the name of the last system whose results were collected,
then look up the name of the next system in sequence, then manually
remove the remote.run file. Even more unfortunately, this procedure can
be fooled in runs where each system handles more than one batch should
a given system take longer than expected, causing the systems to be
handled out of order.
This commit therefore causes kvm-remote.sh to print out the name of
the system it will wait on next, allowing the user to refer directly
to that name. Making the kvm-remote.sh script automatically handle
unscheduled termination of the qemu processes is left as future work.
Quite possibly deep future work.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
projects / people / ms / linux.git / log
