Wentao_Liang [Sun, 19 Jun 2022 14:14:54 +0000 (22:14 +0800)]
drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c
The pointer vdev points to a memory region adjacent to a net_device
structure ndev, which is a field of hldev. At line 4740, the invocation
to vxge_device_unregister unregisters device hldev, and it also releases
the memory region pointed by vdev->bar0. At line 4743, the freed memory
region is referenced (i.e., iounmap(vdev->bar0)), resulting in a
use-after-free vulnerability. We can fix the bug by calling iounmap
before vxge_device_unregister.
Simon Horman [Sun, 19 Jun 2022 08:15:30 +0000 (10:15 +0200)]
Revert "nfp: update nfp_X logging definitions"
This reverts commit 9386ebccfc59 ("nfp: update nfp_X logging definitions")
The reverted patch was intended to improve logging for the NFP driver by
including information such as the source code file and number in log
messages.
Unfortunately our experience is that this has not improved things as
we had hoped. The resulting logs are inconsistent with (most) other
kernel log messages. And rely on knowledge of the source code version
in order for the extra information to be useful.
Thus, revert the change.
We acknowledge that Jakub Kicinski <kuba@kernel.org> foresaw this problem.
Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
While converting the mv88e6xxx driver to phylink pcs, it has been
noticed that we've started to have repeated cases where we convert a
speed and duplex to a BMCR value.
Rather than open coding this in multiple locations, let's provide a
helper for this - in linux/mii.h. This helper not only takes care of
the standard 10, 100 and 1000Mbps encodings, but also includes
2500Mbps (which is the same as 1000Mbps) for those users who require
that encoding as well. Unknown speeds will be encoded to 10Mbps, and
non-full duplexes will be encoded as half duplex.
This series converts the existing users to the new helper, and the
mv88e6xxx conversion will add further users in the 6352 and 639x PCS
code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Mon, 13 Jun 2022 14:58:26 +0000 (16:58 +0200)]
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR, CAN.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Xiaoliang Yang [Fri, 17 Jun 2022 03:24:23 +0000 (11:24 +0800)]
net: dsa: felix: update base time of time-aware shaper when adjusting PTP time
When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS configuration by using a
new base time.
For example, if the driver gets a base time 0 of Qbv configuration from
user, and current time is 20000. The driver will set the TAS base time
to be 20000. After the PTP clock adjustment, the current time becomes
10000. If the TAS base time is still 20000, it will be a future time,
and TAS entry list will stop running. Another example, if the current
time becomes to be 10000000 after PTP clock adjust, a large time offset
can cause the hardware to hang.
This patch introduces a tas_clock_adjust() function to reset the TAS
module by using a new base time after the PTP clock adjustment. This can
avoid issues above.
Due to PTP clock adjustment can occur at any time, it may conflict with
the TAS configuration. We introduce a new TAS lock to serialize the
access to the TAS registers.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Stein [Mon, 13 Jun 2022 12:33:57 +0000 (14:33 +0200)]
ARM: dts: imx6ul: fix qspi node compatible
imx6ul is not compatible to imx6sx, both have different erratas.
Fixes the dt_binding_check warning:
spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long
Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected)
'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi']
'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi']
'fsl,ls1021a-qspi' was expected
'fsl,imx7d-qspi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 13 Jun 2022 12:33:56 +0000 (14:33 +0200)]
ARM: dts: imx6ul: fix lcdif node compatible
In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif,
but not imx28-lcdif. Change the list accordingly. Fixes the
dt_binding_check warning:
lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long
Additional items are not allowed ('fsl,imx28-lcdif' was unexpected)
'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif',
'fsl,imx6sx-lcdif']
'fsl,imx6sx-lcdif' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 13 Jun 2022 12:33:55 +0000 (14:33 +0200)]
ARM: dts: imx6ul: fix csi node compatible
"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither
in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes
the dt schema check warning:
csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long
Additional items are not allowed ('fsl,imx7-csi' was unexpected)
'fsl,imx8mm-csi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 13 Jun 2022 12:33:53 +0000 (14:33 +0200)]
ARM: dts: imx6ul: fix keypad compatible
According to binding, the compatible shall only contain imx6ul and imx21
compatibles. Fixes the dt_binding_check warning:
keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long
Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were
unexpected)
Additional items are not allowed ('fsl,imx21-kpp' was unexpected)
'fsl,imx21-kpp' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 13 Jun 2022 12:33:52 +0000 (14:33 +0200)]
ARM: dts: imx6ul: change operating-points to uint32-matrix
operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000, 1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000, 1175000, 396000, 1025000, 198000, 950000 were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 13 Jun 2022 12:33:51 +0000 (14:33 +0200)]
ARM: dts: imx6ul: add missing properties for sram
All 3 properties are required by sram.yaml. Fixes the dtbs_check
warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
net: ethernet: stmmac: remove select QCOM_SOCINFO and make it optional
QCOM_SOCINFO depends on QCOM_SMEM but is not selected, this cause some
problems with QCOM_SOCINFO getting selected with the dependency of
QCOM_SMEM not met.
To fix this remove the select in Kconfig and add additional info in the
DWMAC_IPQ806X config description.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 9ec092d2feb6 ("net: ethernet: stmmac: add missing sgmii configure for ipq806x") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Wed, 8 Jun 2022 17:02:23 +0000 (14:02 -0300)]
arm64: dts: imx8m: Disable job ring 0 nodes
Now that the JR0 reservation is done in both upstream (v2.7) and
downstream (NXP lf_v2.4) TF-A versions, the kernel fails to initialize
the job ring 0:
# dmesg | grep jr
caam_jr 30901000.jr: failed to flush job ring 0
caam_jr: probe of 30901000.jr failed with error -5
Disable the sec_jr0 nodes by default to avoid the caam_jr probe error.
Martin Kaiser [Thu, 2 Jun 2022 08:03:42 +0000 (10:03 +0200)]
ARM: imx25: support silicon revision 1.2
Update the mx25_read_cpu_rev function to recognize silicon revision 1.2
for imx25 chipsets.
Silicon revision 1.2 is mentioned in the errata document at
https://www.nxp.com/docs/en/errata/IMX25CE.pdf. The imx25 chips on my
test boards show revision 1.2 as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Torvalds [Sun, 19 Jun 2022 02:51:12 +0000 (21:51 -0500)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
Linus Torvalds [Sun, 19 Jun 2022 02:44:44 +0000 (21:44 -0500)]
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
Ulrich Ölmann [Tue, 17 May 2022 07:18:14 +0000 (09:18 +0200)]
ARM: dts: imx6: skov: add pwm-regulator to control the panel's VCOM
Skov's i.MX6 based boards come in different flavors which have different panels
attached. For optimal contrast experience each panel type needs an individual
common voltage (VCOM) to drive its TFT backplane. The latter is generated by an
LCD bias supply IC controlled by a pwm as input signal. Introduce a pwm-
regulator to describe this hardware property and parameterize it appropriately
for the different boards.
Zhang Yi [Wed, 1 Jun 2022 09:27:17 +0000 (17:27 +0800)]
ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ding Xiang [Mon, 30 May 2022 10:00:47 +0000 (18:00 +0800)]
ext4: make variable "count" signed
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Baokun Li [Sat, 28 May 2022 11:00:16 +0000 (19:00 +0800)]
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eric Biggers [Thu, 26 May 2022 04:04:12 +0000 (21:04 -0700)]
ext4: fix up test_dummy_encryption handling for new mount API
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Liang He [Fri, 17 Jun 2022 11:53:23 +0000 (19:53 +0800)]
xtensa: xtfpga: Fix refcount leak bug in setup
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Liang He [Fri, 17 Jun 2022 12:44:32 +0000 (20:44 +0800)]
xtensa: Fix refcount leak bug in time.c
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Shyam Prasad N [Tue, 14 Jun 2022 11:47:24 +0000 (11:47 +0000)]
cifs: when a channel is not found for server, log its connection id
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Luca Weiss [Tue, 14 Jun 2022 11:20:50 +0000 (13:20 +0200)]
proximity: vl53l0x: Make VDD regulator actually optional
Contrary to what the naming might suggest, devm_regulator_get_optional
returns -ENODEV in case the regulator is not found which will trigger
probe error in this driver.
Use devm_regulator_get instead which will return a dummy regulator that
we can just use as if it was a proper regulator.
Kuogee Hsieh [Thu, 16 Jun 2022 20:26:40 +0000 (13:26 -0700)]
drm/msm/dp: force link training for display resolution change
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.
However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.
This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.
Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)
Changes in v3:
-- revise commit text
-- add Fixes tag
Changes in v4:
-- revise commit text
Changes in v5:
-- fix spelling at commit text
Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset
Changes in v7:
-- drop 0 assignment at local variable (ret = 0)
Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl
Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()
Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/ Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Abhinav Kumar [Thu, 16 Jun 2022 19:26:46 +0000 (12:26 -0700)]
drm/msm/dpu: limit wb modes based on max_mixer_width
As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.
This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.
The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.
But this would be an exhaustive solution till we have
dual SSPP support.
Let's instead use max_mixer_width to limit the modes.
max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.
Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.
Kuogee Hsieh [Mon, 6 Jun 2022 17:55:39 +0000 (10:55 -0700)]
drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.
changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch
Fixes: 570d3e5d28db ("drm/msm/dp: stop event kernel thread when DP unbind") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/ Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Miaoqian Lin [Tue, 7 Jun 2022 11:08:38 +0000 (15:08 +0400)]
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Sat, 18 Jun 2022 16:11:19 +0000 (09:11 -0700)]
drm/msm: Don't overwrite hw fence in hw_init
Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend. This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value. But we should just not do this. Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).
Rob Clark [Sat, 18 Jun 2022 16:11:18 +0000 (09:11 -0700)]
drm/msm: Drop update_fences()
I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits. But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.
v2: use spin_lock_irqsave/restore as we are no longer protected by the
spin_lock_irqsave/restore() in update_fences()
Tetsuo Handa [Sun, 12 Jun 2022 15:04:00 +0000 (00:04 +0900)]
iio:light:tsl2563: Replace cancel_delayed_work() with cancel_delayed_work_sync().
Since cancel_delayed_work(&chip->poweroff_work) does not guarantee that
tsl2563_poweroff_work() is not running, tsl2563_set_power(chip, 0) can be
called from tsl2563_poweroff_work() after tsl2563_get_power(chip) and
tsl2563_set_power(chip, 1) are called. Use _sync version in order to make
sure that tsl2563_poweroff_work() is no longer running.
runtime WARN_ONCE() is added to alarm IIO driver authors who make such
a mistake.
When an IIO driver allocates a new IIO trigger, it should register it
before calling the get() operation. In other words, each IIO driver
must abide by IIO trigger alloc()/register()/get() calls order.
iio: adc: qcom-spmi-rradc: introduce round robin adc
The Round Robin ADC is responsible for reading data about the rate of
charge from the USB or DC input ports, it can also read the battery
ID (resistence), skin temperature and the die temperature of the pmic.
It is found on the PMI8998 and PM660 Qualcomm PMICs.
mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
Some PMIC functions such as the RRADC need to be aware of the PMIC
chip revision information to implement errata or otherwise adjust
behaviour, export the PMIC information to enable this.
This is specifically required to enable the RRADC to adjust
coefficients based on which chip fab the PMIC was produced in,
this can vary per unique device and therefore has to be read at
runtime.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
spmi: add a helper to look up an SPMI device from a device node
The helper function spmi_device_from_of() takes a device node and
returns the SPMI device associated with it.
This is like of_find_device_by_node but for SPMI devices.
Eric Dumazet [Sat, 18 Jun 2022 04:04:15 +0000 (21:04 -0700)]
ping: convert to RCU lookups, get rid of rwlock
Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.
I thought rwlock were at fault and sent this patch:
https://lkml.org/lkml/2022/6/17/272
But Peter and Linus essentially told me rwlock had to be unfair.
We need to get rid of rwlock in networking code.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Lafreniere [Thu, 16 Jun 2022 15:23:33 +0000 (11:23 -0400)]
ax25: use GFP_KERNEL in ax25_dev_device_up()
ax25_dev_device_up() is only called during device setup, which is
done in user context. In addition, ax25_dev_device_up()
unconditionally calls ax25_register_dev_sysctl(), which already
allocates with GFP_KERNEL.
Since it is allowed to sleep in this function, here we change
ax25_dev_device_up() to use GFP_KERNEL to reduce unnecessary
out-of-memory errors.
qopt.latency is __u32, psched_tdiff_t is signed long,
(psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so
qopt.latency is always UINT_MAX.
Fix it by using psched_time_t (u64) instead.
Note: confusingly, users have two ways to specify 'latency':
1. normally, via '__u32 latency' in struct tc_netem_qopt;
2. via the TCA_NETEM_LATENCY64 attribute, which is s64.
For the second case, theoretically 'latency' could be negative. This
patch ignores that corner case, since it is broken (i.e. assigning a
negative s64 to __u32) anyways, and should be handled separately.
Ivan Vecera [Thu, 16 Jun 2022 16:08:55 +0000 (18:08 +0200)]
ethtool: Fix get module eeprom fallback
Function fallback_set_params() checks if the module type returned
by a driver is ETH_MODULE_SFF_8079 and in this case it assumes
that buffer returns a concatenated content of page A0h and A2h.
The check is wrong because the correct type is ETH_MODULE_SFF_8472.
Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bonding ARP monitor fails to decrement send_peer_notif, the
number of peer notifications (gratuitous ARP or ND) to be sent. This
results in a continuous series of notifications.
Correct this by decrementing the counter for each notification.
Lorenzo Bianconi [Thu, 16 Jun 2022 14:13:20 +0000 (16:13 +0200)]
igb: fix a use-after-free issue in igb_clean_tx_ring
Fix the following use-after-free bug in igb_clean_tx_ring routine when
the NIC is running in XDP mode. The issue can be triggered redirecting
traffic into the igb NIC and then closing the device while the traffic
is flowing.
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
We've added 12 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 305 insertions(+), 107 deletions(-).
The main changes are:
1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki.
2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa.
3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi.
4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu.
5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell.
6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rethook: Reject getting a rethook if RCU is not watching
fprobe, samples: Add use_trace option and show hit/missed counter
bpf, docs: Update some of the JIT/maintenance entries
selftest/bpf: Fix kprobe_multi bench test
bpf: Force cookies array to follow symbols sorting
ftrace: Keep address offset in ftrace_lookup_symbols
selftests/bpf: Shuffle cookies symbols in kprobe multi test
selftests/bpf: Test tail call counting with bpf2bpf and data on stack
bpf, x86: Fix tail call count offset calculation on bpf2bpf call
bpf: Limit maximum modifier chain length in btf_check_type_tags
bpf: Fix request_sock leak in sk lookup helpers
xsk: Fix generic transmit when completion queue reservation fails
====================
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Matt Ranostay [Fri, 17 Jun 2022 15:13:04 +0000 (08:13 -0700)]
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
GICD region was overlapping with GICR causing the latter to not map
successfully, and in turn the gic-v3 driver would fail to initialize.
This issue was hidden till commit 2b2cd74a06c3 ("irqchip/gic-v3: Claim
iomem resources") replaced of_iomap() calls with of_io_request_and_map()
that internally called request_mem_region().
Respective console output before this patchset:
[ 0.000000] GICv3: /bus@100000/interrupt-controller@1800000: couldn't map region 0
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC") Cc: linux-stable@vger.kernel.org Cc: Marc Zyngier <maz@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220617151304.446607-1-mranostay@ti.com
Mark Brown [Sat, 18 Jun 2022 00:46:19 +0000 (01:46 +0100)]
ASoC: SOF/soundwire: use resume_and_get on component probe
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
While testing driver bind/unbind sequences, I stumbled on a corner
case where the SoundWire bus can be suspended before the ASoC card
registration happens. During the registration, register accesses would
then lead to timeouts. This does not happen in regular usages where
the card registration happens within the 3-second time window before
suspend.
Adding a simple pm_runtime_resume_and_get() on component probe solves
the issue, but experiments showed it was too invasive to add at the
ASoC core level, with multiple regressions reported by our CI.
This patchset limits the additional resume to the SOF and SoundWire
codec drivers. An additional patch for the soundwire/intel component
will be sent separately.
Andrew Donnellan [Tue, 14 Jun 2022 13:49:52 +0000 (23:49 +1000)]
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.
According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.
Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.
Naveen N. Rao [Thu, 9 Jun 2022 10:33:28 +0000 (16:03 +0530)]
powerpc: Enable execve syscall exit tracepoint
On execve[at], we are zero'ing out most of the thread register state
including gpr[0], which contains the syscall number. Due to this, we
fail to trigger the syscall exit tracepoint properly. Fix this by
retaining gpr[0] in the thread register state.
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
powerpc/microwatt: wire up rng during setup_arch()
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fddaec ("powerpc/microwatt: Add support for hardware random number generator") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220611151015.548325-2-Jason@zx2c4.com
Michael Ellerman [Thu, 16 Jun 2022 08:41:49 +0000 (18:41 +1000)]
powerpc/mm: Move CMA reservations after initmem_init()
After commit 11ac3e87ce09 ("mm: cma: use pageblock_order as the single
alignment") there is an error at boot about the KVM CMA reservation
failing, eg:
kvm_cma_reserve: reserving 6553 MiB for global area
cma: Failed to reserve 6553 MiB
That makes it impossible to start KVM guests using the hash MMU with
more than 2G of memory, because the VM is unable to allocate a large
enough region for the hash page table, eg:
$ qemu-system-ppc64 -enable-kvm -M pseries -m 4G ...
qemu-system-ppc64: Failed to allocate KVM HPT of order 25: Cannot allocate memory
Aneesh pointed out that this happens because when kvm_cma_reserve() is
called, pageblock_order has not been initialised yet, and is still zero,
causing the checks in cma_init_reserved_mem() against
CMA_MIN_ALIGNMENT_PAGES to fail.
Fix it by moving the call to kvm_cma_reserve() after initmem_init(). The
pageblock_order is initialised in sparse_init() which is called from
initmem_init().
Also move the hugetlb CMA reservation.
Fixes: 11ac3e87ce09 ("mm: cma: use pageblock_order as the single alignment") Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220616120033.1976732-1-mpe@ellerman.id.au
Mark Brown [Fri, 17 Jun 2022 23:18:16 +0000 (00:18 +0100)]
ASoC: SOF: Intel: fix resume from hibernate
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The enablement of IMR-based DSP boot helped reduce resume latency, but
unfortunately the context is not saved in S4 and S5 which leads to
multiple reports of boot failures.
This patchset forces a full firmware reload/reboot when resuming from
S4/S5 and restores functionality.
sunliming [Thu, 2 Jun 2022 14:06:13 +0000 (22:06 +0800)]
tracing: Simplify conditional compilation code in tracing_set_tracer()
Two conditional compilation directives "#ifdef CONFIG_TRACER_MAX_TRACE"
are used consecutively, and no other code in between. Simplify conditional
the compilation code and only use one "#ifdef CONFIG_TRACER_MAX_TRACE".
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
load_unaligned_zeropad() can lead to unwanted loads across page boundaries.
The unwanted loads are typically harmless. But, they might be made to
totally unrelated or even unmapped memory. load_unaligned_zeropad()
relies on exception fixup (#PF, #GP and now #VE) to recover from these
unwanted loads.
In TDX guests, the second page can be shared page and a VMM may configure
it to trigger #VE.
The kernel assumes that #VE on a shared page is an MMIO access and tries to
decode instruction to handle it. In case of load_unaligned_zeropad() it
may result in confusion as it is not MMIO access.
Fix it by detecting split page MMIO accesses and failing them.
load_unaligned_zeropad() will recover using exception fixups.
The issue was discovered by analysis and reproduced artificially. It was
not triggered during testing.
[ dhansen: fix up changelogs and comments for grammar and clarity,
plus incorporate Kirill's off-by-one fix]
In brcmstb_biuctrl_init(), of_find_compatible_node() will return a
node pointer with refcount incremented. We should use of_node_put()
in each fail path or when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
projects / people / ms / linux.git / log
