Gautam Dawar [Wed, 30 Mar 2022 18:03:52 +0000 (23:33 +0530)]
vhost-vdpa: introduce uAPI to get the number of address spaces
This patch introduces the uAPI for getting the number of address
spaces supported by this vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-13-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:51 +0000 (23:33 +0530)]
vhost-vdpa: introduce uAPI to get the number of virtqueue groups
Follows the vDPA support for multiple address spaces, this patch
introduce uAPI for the userspace to know the number of virtqueue
groups supported by the vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-12-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:50 +0000 (23:33 +0530)]
vhost-vdpa: introduce asid based IOTLB
This patch converts the vhost-vDPA device to support multiple IOTLBs
tagged via ASID via hlist. This will be used for supporting multiple
address spaces in the following patches.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-11-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:49 +0000 (23:33 +0530)]
vhost: support ASID in IOTLB API
This patches allows userspace to send ASID based IOTLB message to
vhost. This idea is to use the reserved u32 field in the existing V2
IOTLB message. Vhost device should advertise this capability via
VHOST_BACKEND_F_IOTLB_ASID backend feature.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-10-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:48 +0000 (23:33 +0530)]
vhost_iotlb: split out IOTLB initialization
This patch splits out IOTLB initialization to make sure it could be
reused by external modules.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-9-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:47 +0000 (23:33 +0530)]
vdpa: introduce config operations for associating ASID to a virtqueue group
This patch introduces a new bus operation to allow the vDPA bus driver
to associate an ASID to a virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-8-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:46 +0000 (23:33 +0530)]
vdpa: multiple address spaces support
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:45 +0000 (23:33 +0530)]
vdpa: introduce virtqueue groups
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:44 +0000 (23:33 +0530)]
vhost-vdpa: switch to use vhost-vdpa specific IOTLB
To ease the implementation of per group ASID support for vDPA
device. This patch switches to use a vhost-vdpa specific IOTLB to
avoid the unnecessary refactoring of the vhost core.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-5-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:43 +0000 (23:33 +0530)]
vhost-vdpa: passing iotlb to IOMMU mapping helpers
To prepare for the ASID support for vhost-vdpa, try to pass IOTLB
object to dma helpers. No functional changes, it's just a preparation
for support multiple IOTLBs.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-4-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:42 +0000 (23:33 +0530)]
virtio-vdpa: don't set callback if virtio doesn't need it
There's no need for setting callbacks for the driver that doesn't care
about that.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-3-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gautam Dawar [Wed, 30 Mar 2022 18:03:41 +0000 (23:33 +0530)]
vhost: move the backend feature bits to vhost_types.h
We should store feature bits in vhost_types.h as what has been done
for e.g VHOST_F_LOG_ALL.
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-2-gdawar@xilinx.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xianting Tian [Mon, 28 Mar 2022 10:58:17 +0000 (18:58 +0800)]
virtio_ring: add unlikely annotation for free descs check
The 'if (vq->vq.num_free < descs_used)' check will almost always be false.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20220328105817.1028065-2-xianting.tian@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Xianting Tian [Mon, 28 Mar 2022 10:58:16 +0000 (18:58 +0800)]
virtio_ring: remove unnecessary to_vvq call in vring hot path
It passes '_vq' to virtqueue_use_indirect(), which still calls
to_vvq to get 'vq', let's directly pass 'vq'. It can avoid
unnecessary call of to_vvq in hot path.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20220328105817.1028065-1-xianting.tian@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Suwan Kim [Wed, 6 Apr 2022 15:32:07 +0000 (00:32 +0900)]
virtio-blk: support mq_ops->queue_rqs()
This patch supports mq_ops->queue_rqs() hook. It has an advantage of
batch submission to virtio-blk driver. It also helps polling I/O because
polling uses batched completion of block layer. Batch submission in
queue_rqs() can boost polling performance.
In queue_rqs(), it iterates plug->mq_list, collects requests that
belong to same HW queue until it encounters a request from other
HW queue or sees the end of the list.
Then, virtio-blk adds requests into virtqueue and kicks virtqueue
to submit requests.
If there is an error, it inserts error request to requeue_list and
passes it to ordinary block layer path.
For verification, I did fio test.
(io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N)
I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times.
It shows about 2% improvement.
For polling I/O performance, I also did fio test as below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4)
I set 4 vcpu and 2 poll queues for VM.
It shows about 2% improvement in polling I/O.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Suwan Kim [Wed, 6 Apr 2022 15:32:06 +0000 (00:32 +0900)]
virtio-blk: support polling I/O
This patch supports polling I/O via virtio-blk driver. Polling
feature is enabled by module parameter "poll_queues" and it sets
dedicated polling queues for virtio-blk. This patch improves the
polling I/O throughput and latency.
The virtio-blk driver doesn't not have a poll function and a poll
queue and it has been operating in interrupt driven method even if
the polling function is called in the upper layer.
virtio-blk polling is implemented upon 'batched completion' of block
layer. virtblk_poll() queues completed request to io_comp_batch->req_list
and later, virtblk_complete_batch() calls unmap function and ends
the requests in batch.
virtio-blk reads the number of poll queues from module parameter
"poll_queues". If VM sets queue parameter as below,
("num-queues=N" [QEMU property], "poll_queues=M" [module parameter])
It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)]
as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default
queues, the poll queues have no callback function.
Regarding HW-SW queue mapping, the default queue mapping uses the
existing method that condsiders MSI irq vector. But the poll queue
doesn't have an irq, so it uses the regular blk-mq cpu mapping.
For verifying the improvement, I did Fio polling I/O performance test
with io_uring engine with the options below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N)
I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll
queues for VM.
As a result, IOPS and average latency improved about 10%.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Eli Cohen [Wed, 18 May 2022 13:38:04 +0000 (16:38 +0300)]
vdpa/mlx5: Use readers/writers semaphore instead of mutex
Reading statistics could be done intensively and by several processes
concurrently. Reader's lock is sufficient in this case.
Change reslock from mutex to a rwsem.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-7-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eli Cohen [Wed, 18 May 2022 13:38:02 +0000 (16:38 +0300)]
net/vdpa: Use readers/writers semaphore instead of cf_mutex
Replace cf_mutex with rw_semaphore to reflect the fact that some calls
could be called concurrently but can suffice with read lock.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-5-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eli Cohen [Wed, 18 May 2022 13:38:01 +0000 (16:38 +0300)]
net/vdpa: Use readers/writers semaphore instead of vdpa_dev_mutex
Use rw_semaphore instead of mutex to control access to vdpa devices.
This can be especially beneficial in case processes poll on statistics
information.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-4-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eli Cohen [Wed, 18 May 2022 13:38:00 +0000 (16:38 +0300)]
vdpa: Add support for querying vendor statistics
Allows to read vendor statistics of a vdpa device. The specific
statistics data are received from the upstream driver in the form of an
(attribute name, attribute value) pairs.
An example of statistics for mlx5_vdpa device are:
received_desc - number of descriptors received by the virtqueue
completed_desc - number of descriptors completed by the virtqueue
A descriptor using indirect buffers is still counted as 1. In addition,
N chained descriptors are counted correctly N times as one would expect.
A new callback was added to vdpa_config_ops which provides the means for
the vdpa driver to return statistics results.
The interface allows for reading all the supported virtqueues, including
the control virtqueue if it exists.
Below are some examples taken from mlx5_vdpa which are introduced in the
following patch:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
2. Read statistics for the virtqueue at index 32
$ vdpa dev vstats show vdpa-a qidx 32
vdpa-a:
queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{
"queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
"name":"completed_desc","value":417548}}}
4. Read statistics for the virtqueue at index 0 with preety json output
$ vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
Eli Cohen [Wed, 18 May 2022 13:37:59 +0000 (16:37 +0300)]
vdpa: Fix error logic in vdpa_nl_cmd_dev_get_doit
In vdpa_nl_cmd_dev_get_doit(), if the call to genlmsg_reply() fails we
must not call nlmsg_free() since this is done inside genlmsg_reply().
Fix it.
Fixes: bc0d90ee021f ("vdpa: Enable user to query vdpa device info") Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-2-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Brown [Tue, 31 May 2022 15:13:37 +0000 (17:13 +0200)]
selftests: alsa: Handle pkg-config failure more gracefully
Follow the pattern used by other selftests like memfd and fall back on the
standard toolchain options to build with a system installed alsa-lib if
we don't get anything from pkg-config. This reduces our build dependencies
a bit in the common case while still allowing use of pkg-config in case
there is a need for it.
Namjae Jeon [Mon, 30 May 2022 15:43:01 +0000 (18:43 +0300)]
fs/ntfs3: Fix invalid free in log_replay
log_read_rst() returns ENOMEM error when there is not enough memory.
In this case, if info is returned without initialization,
it attempts to kfree the uninitialized info->r_page pointer. This patch
moves the memset initialization code to before log_read_rst() is called.
Reported-by: Gerald Lee <sundaywind2004@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Arnd Bergmann [Tue, 24 May 2022 12:20:06 +0000 (14:20 +0200)]
ARM: pxa/mmp: remove traces of plat-pxa
The missing include directory caused a W=1 warning that can be
trivially fixed. I also noticed references in the marvell.rst
documentation that can be removed at the same time.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string
patternProperties should not be used for properties with a simple string
as name:
Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml: patternProperties:^(.*-edge|rpm)$:patternProperties:
'^rpm-requests$' should not be valid under {'pattern': '^\\^[a-zA-Z0-9,\\-._#]+\\$$'}
Ben Chuang [Fri, 20 May 2022 11:42:42 +0000 (19:42 +0800)]
mmc: sdhci-pci-gli: Fix GL9763E runtime PM when the system resumes from suspend
When the system resumes from suspend (S3 or S4), the power mode is
MMC_POWER_OFF. In this status, gl9763e_runtime_resume() should not enable
PLL. Add a condition to this function to enable PLL only when the power
mode is MMC_POWER_ON.
Takashi Iwai [Tue, 31 May 2022 13:07:49 +0000 (15:07 +0200)]
ALSA: usb-audio: Optimize TEAC clock quirk
Maris found out that the quirk for TEAC devices to work around the
clock setup is needed to apply only when the base clock is changed,
e.g. from 48000-based clocks (48000, 96000, 192000, 384000) to
44100-based clocks (44100, 88200, 176400, 352800), or vice versa,
while switching to another clock with the same base clock doesn't need
the (forcible) interface setup.
This patch implements the optimization for the TEAC clock quirk to
avoid the unnecessary interface re-setup.
Fixes: 5ce0b06ae5e6 ("ALSA: usb-audio: Workaround for clock setup on TEAC devices") Reported-by: Maris Abele <maris7abele@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220531130749.30357-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arun Ajith S [Mon, 30 May 2022 10:14:14 +0000 (10:14 +0000)]
net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_na
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: f9a2fb73318e ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131") Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xiaoguang Wang [Mon, 30 May 2022 13:15:20 +0000 (21:15 +0800)]
io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots
One big issue with the file registration feature is that it needs user
space apps to maintain free slot info about io_uring's fixed file table,
which really is a burden for development. io_uring now supports choosing
free file slot for user space apps by using IORING_FILE_INDEX_ALLOC flag
in accept, open, and socket operations, but they need the app to use
direct accept or direct open, which not all apps are prepared to use yet.
To support apps that still need real fds, make use of the registration
feature easier. Let IORING_OP_FILES_UPDATE support choosing fixed file
slots, which will store picked fixed files slots in fd array and let cqe
return the number of slots allocated.
Suggested-by: Hao Xu <howeyxu@tencent.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
[axboe: move flag to uapi io_uring header, change goto to break, init] Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xiaoguang Wang [Sat, 28 May 2022 01:51:09 +0000 (09:51 +0800)]
io_uring: defer alloc_hint update to io_file_bitmap_set()
io_file_bitmap_get() returns a free bitmap slot, but if it isn't
used later, such as io_queue_rsrc_removal() returns error, in this
case, we should not update alloc_hint at all, which still should
be considered as a valid candidate for next io_file_bitmap_get()
calls.
To fix this issue, only update alloc_hint in io_file_bitmap_set().
Jens Axboe [Thu, 26 May 2022 22:58:18 +0000 (16:58 -0600)]
io_uring: wire up allocated direct descriptors for socket
The socket support was merged in an earlier branch that didn't yet
have support for allocating direct descriptors, hence only open
and accept got support for that.
Do the one-liner to enable it now, so we have consistent support for
any request that can instantiate a file/direct descriptor.
Jens Axboe [Thu, 26 May 2022 17:34:33 +0000 (11:34 -0600)]
io_uring: fix a memory leak of buffer group list on exit
If we use a buffer group ID that is large enough to require io_uring
to allocate it, then we don't correctly free it if the cleanup is
deferred to the ring exit. The explicit removal paths are fine.
Fixes: 9cfc7e94e42b ("io_uring: get rid of hashed provided buffer groups") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 23 May 2022 23:16:21 +0000 (17:16 -0600)]
io_uring: unify calling convention for async prep handling
Make them consistent in preparation for defining a req async prep
handler. The readv/writev requests share a prep handler, move it one
level down so the initial one is consistent with the others.
Mark Brown [Tue, 31 May 2022 08:16:59 +0000 (10:16 +0200)]
ASoC: da7219: Small fixes for jack detection and removal
Merge series from Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com>:
This series contains 2 small fixes around the AAD part of DA7219, particularly
in relation to jack pole detection on certain active headsets, and tidy up
when a jack is removed.
Borislav Petkov [Wed, 25 May 2022 16:12:31 +0000 (18:12 +0200)]
x86/microcode: Taint and warn on late loading
Warn before it is attempted and taint the kernel. Late loading microcode
can lead to malfunction of the kernel when the microcode update changes
behaviour. There is no way for the kernel to determine whether its safe or
not.
Niklas Cassel [Thu, 26 May 2022 13:57:21 +0000 (15:57 +0200)]
nvme: set controller enable bit in a separate write
The NVM Express Base Specification 2.0 specifies in the description
of the CC – Controller Configuration register:
"Host software shall set the Arbitration Mechanism Selected (CC.AMS),
the Memory Page Size (CC.MPS), and the I/O Command Set Selected (CC.CSS)
to valid values prior to enabling the controller by setting CC.EN to ‘1’.
While we haven't seen any controller misbehaving while setting all bits
in a single write, let's do it in the order that it is written in the
spec, as there could potentially be controllers that are implemented to
rely on the configuration bits being set before enabling the controller.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
The MAXIO MAP1001 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Viorel Suman [Fri, 27 May 2022 08:49:34 +0000 (11:49 +0300)]
net: phy: at803x: disable WOL at probe
Before 7beecaf7d507b ("net: phy: at803x: improve the WOL feature") patch
"at803x_get_wol" implementation used AT803X_INTR_ENABLE_WOL value to set
WAKE_MAGIC flag, and now AT803X_WOL_EN value is used for the same purpose.
The problem here is that the values of these two bits are different after
hardware reset: AT803X_INTR_ENABLE_WOL=0 after hardware reset, but
AT803X_WOL_EN=1. So now, if called right after boot, "at803x_get_wol" will
set WAKE_MAGIC flag, even if WOL function is not enabled by calling
"at803x_set_wol" function. The patch disables WOL function on probe thus
the behavior is consistent.
huhai [Thu, 26 May 2022 10:12:13 +0000 (18:12 +0800)]
net: ipv4: Avoid bounds check warning
Fix the following build warning when CONFIG_IPV6 is not set:
In function ‘fortify_memcpy_chk’,
inlined from ‘tcp_md5_do_add’ at net/ipv4/tcp_ipv4.c:1210:2:
./include/linux/fortify-string.h:328:4: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
328 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: stable@vger.kernel.org Signed-off-by: Roberto Bergantinos <rbergant@redhat.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Vaibhav Jain [Tue, 24 May 2022 11:23:53 +0000 (16:53 +0530)]
powerpc/papr_scm: don't requests stats with '0' sized stats buffer
Sachin reported [1] that on a POWER-10 lpar he is seeing a kernel panic being
reported with vPMEM when papr_scm probe is being called. The panic is of the
form below and is observed only with following option disabled(profile) for the
said LPAR 'Enable Performance Information Collection' in the HMC:
Kernel attempted to write user page (1c) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x0000001c
Faulting instruction address: 0xc008000001b90844
Oops: Kernel access of bad area, sig: 11 [#1]
<snip>
NIP [c008000001b90844] drc_pmem_query_stats+0x5c/0x270 [papr_scm]
LR [c008000001b92794] papr_scm_probe+0x2ac/0x6ec [papr_scm]
Call Trace:
0xc00000000941bca0 (unreliable)
papr_scm_probe+0x2ac/0x6ec [papr_scm]
platform_probe+0x98/0x150
really_probe+0xfc/0x510
__driver_probe_device+0x17c/0x230
<snip>
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
On investigation looks like this panic was caused due to a 'stat_buffer' of
size==0 being provided to drc_pmem_query_stats() to fetch all performance
stats-ids of an NVDIMM. However drc_pmem_query_stats() shouldn't have been called
since the vPMEM NVDIMM doesn't support and performance stat-id's. This was caused
due to missing check for 'p->stat_buffer_len' at the beginning of
papr_scm_pmu_check_events() which indicates that the NVDIMM doesn't support
performance-stats.
Fix this by introducing the check for 'p->stat_buffer_len' at the beginning of
papr_scm_pmu_check_events().
Uwe Kleine-König [Mon, 30 May 2022 07:42:02 +0000 (09:42 +0200)]
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.
Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.
Saurabh Sengar [Sat, 21 May 2022 14:23:39 +0000 (07:23 -0700)]
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
There were two different approaches getting used in this driver to
allocate vram:
1. VRAM allocation from PCI region for Gen1
2. VRAM alloaction from MMIO region for Gen2
First approach limilts the vram to PCI BAR size, which is 64 MB in most
legacy systems. This limits the maximum resolution to be restricted to
64 MB size, and with recent conclusion on fbdev issue its concluded to have
similar allocation strategy for both Gen1 and Gen2. This patch unifies
the Gen1 and Gen2 vram allocation strategy.
* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Add prototype for hwa742_update_window_async()
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
video: fbdev: radeon: Fix spelling typo in comment
video: fbdev: xen: remove setting of 'transp' parameter
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
Linus Torvalds [Mon, 30 May 2022 18:52:18 +0000 (11:52 -0700)]
Merge tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"Minor cleanups and code optimizations, e.g.:
- improvements in assembly statements in the tmpalias code path
- added some additionals compile time checks
- drop some unneccesary assembler DMA syncs"
* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
parisc: Optimize tmpalias function calls
parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
parisc: Fix wrong comment for shr macro
parisc: Prevent ldil() to sign-extend into upper 32 bits
parisc: Don't hardcode assembler bit definitions in tmpalias code
parisc: Don't enforce DMA completion order in cache flushes
parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
Linus Torvalds [Mon, 30 May 2022 18:37:26 +0000 (11:37 -0700)]
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
Linus Torvalds [Mon, 30 May 2022 18:30:16 +0000 (11:30 -0700)]
Merge tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add some new device IDs, update a few drivers (processor,
battery, backlight) and clean up code in a few places.
Specifics:
- Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar)
- Rearrange find_child_checks() to simplify code (Rafael Wysocki)
- Use memremap() to map the UCSI mailbox that is always in main
memory and drop acpi_release_memory() that has no more users
(Heikki Krogerus, Dan Carpenter)
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng)
- Fix typo in the CPPC driver (Julia Lawall)
- Make the ACPI battery driver show the "not-charging" status by
default unless "charging" or "full" is directly indicated (Werner
Sembach)
- Improve the PM notifier in the ACPI backlight driver (Zhang Rui)
- Clean up some white space in the ACPI code (Ian Cowan)"
* tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: DPTF: Support Meteor Lake
ACPI: CPPC: fix typo in comment
ACPI: video: improve PM notifer callback
ACPI: clean up white space in a few places for consistency
ACPI: glue: Rearrange find_child_checks()
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
ACPI: battery: Make "not-charging" the default on no charging or full info
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
Linus Torvalds [Mon, 30 May 2022 18:19:16 +0000 (11:19 -0700)]
Merge tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Support idmapped layers in overlayfs (Christian Brauner)
- Add a fix to exportfs that is relevant to open_by_handle_at(2) as
well
- Introduce new lookup helpers that allow passing mnt_userns into
inode_permission()
* tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: support idmapped layers
ovl: handle idmappings in ovl_xattr_{g,s}et()
ovl: handle idmappings in layer open helpers
ovl: handle idmappings in ovl_permission()
ovl: use ovl_copy_{real,upper}attr() wrappers
ovl: store lower path in ovl_inode
ovl: handle idmappings for layer lookup
ovl: handle idmappings for layer fileattrs
ovl: use ovl_path_getxattr() wrapper
ovl: use ovl_lookup_upper() wrapper
ovl: use ovl_do_notify_change() wrapper
ovl: pass layer mnt to ovl_open_realfile()
ovl: pass ofs to setattr operations
ovl: handle idmappings in creation operations
ovl: add ovl_upper_mnt_userns() wrapper
ovl: pass ofs to creation operations
ovl: use wrappers to all vfs_*xattr() calls
exportfs: support idmapped mounts
fs: add two trivial lookup helpers
Linus Torvalds [Mon, 30 May 2022 18:01:50 +0000 (11:01 -0700)]
Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
Linus Torvalds [Mon, 30 May 2022 17:56:18 +0000 (10:56 -0700)]
Merge tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A collection of changes to add elf-fdpic loader support for m68k.
Also a collection of various fixes. They include typo corrections,
undefined symbol compilation fixes, removal of the ISA_DMA_API support
and removal of unused code.
Summary:
- correctly set up ZERO_PAGE pointer
- drop ISA_DMA_API support
- fix comment typos
- fixes for undefined symbols
- remove unused code and variables
- elf-fdpic loader support for m68k"
* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 68000 CPU link with no platform selected
m68k: removed unused "mach_get_ss"
m68knommu: fix undefined reference to `mach_get_rtc_pll'
m68knommu: fix undefined reference to `_init_sp'
m68knommu: allow elf_fdpic loader to be selected
m68knommu: add definitions to support elf_fdpic program loader
m68knommu: implement minimal regset support
m68knommu: use asm-generic/mmu.h for nommu setups
m68k: fix typos in comments
m68k: coldfire: drop ISA_DMA_API support
m68knommu: set ZERO_PAGE() to the allocated zeroed page
Merge branches 'acpi-glue', 'acpi-osl', 'acpi-processor' and 'acpi-cppc'
Merge general ACPI cleanups and processor support updates for 5.19-rc1:
- Rearrange find_child_checks() to simplify code (Rafael Wysocki).
- Use memremap() to map the UCSI mailbox that is always in main memory
and drop acpi_release_memory() that has no more users (Heikki
Krogerus, Dan Carpenter).
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng).
* acpi-osl:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
* acpi-processor:
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
Dan Carpenter [Mon, 9 May 2022 09:08:28 +0000 (12:08 +0300)]
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
The devm_memremap() function never returns NULL. It returns error
pointers.
Fixes: cdc3d2abf438 ("usb: typec: ucsi: acpi: Map the mailbox with memremap()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adam Thomson [Mon, 30 May 2022 13:22:23 +0000 (13:22 +0000)]
ASoC: da7219: cancel AAD related work earlier for jack removal
To avoid the unlikely possibility of register misalignment for
headphones being ungrounded/driven after a jack has been removed,
move the cancel_work_sync() call to the start of the jack removal
handling in the IRQ thread.
Adam Thomson [Mon, 30 May 2022 13:22:22 +0000 (13:22 +0000)]
ASoC: da7219: Fix pole orientation detection on certain headsets
It has been recently found that certain 'active' headsets can
be mis-detected as OMTP instead of CTIA, causing obvious issus
with audio quality. This relates to increased resistances which
negatively impacts the pole detection circuitry within the device.
To counter this, ground switches on both headphone channels are
available to enable/disable and these allow for the detection
process to operate as intended, even with active headsets. This
commit adds control of the ground switches to the AAD logic.
Uwe Kleine-König [Sun, 29 May 2022 14:12:50 +0000 (16:12 +0200)]
ASoC: Intel: avs: Fix build error on arc, m68k and sparc
On some platforms (i.e. arc, m68k and sparc) __fls returns an int (while
on most platforms it returns an unsigned long). This triggers a format
warning on these few platforms as the driver uses %ld to print a warning.
So explicitly cast the return value to unsigned long to make the warning
go away (and so fix allmodconfig build on the affected architectures).
Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
Merge OPP (Operating Performance Points) changes for 5.19-rc1:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* pm-opp:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
Pierre Gondois [Mon, 30 May 2022 10:04:24 +0000 (12:04 +0200)]
cpufreq: CPPC: Fix unused-function warning
Building the cppc_cpufreq driver with for arm64 with
CONFIG_ENERGY_MODEL=n triggers the following warnings:
drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used
[-Werror=unused-function]
550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
| ^~~~~~~~~~~~~~~~~
drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used
[-Werror=unused-function]
481 | static int cppc_get_cpu_power(struct device *cpu_dev,
| ^~~~~~~~~~~~~~~~~~
Move the Energy Model related functions into specific guards.
This allows to fix the warning and prevent doing extra work
when the Energy Model is not present.
Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zheng Bin [Sat, 21 May 2022 03:24:38 +0000 (11:24 +0800)]
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails:
drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’:
drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’?
cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em;
^~~~~~~~~~~~~~~~~~~
cpufreq_driver
Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE
to fix this.
Fixes: 740fcdc2c20e ("cpufreq: CPPC: Register EM based on efficiency class information") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Haisu Wang [Mon, 30 May 2022 06:40:59 +0000 (14:40 +0800)]
blk-mq: do not update io_ticks with passthrough requests
Flush or passthrough requests are not accounted as normal IO in completion.
To reflect iostat for slow IO, io_ticks is updated when stat show called
based on inflight numbers.
It may cause inconsistent io_ticks calculation result.
So do not account non-passthrough request when check inflight.
Fixes: 86d7331299fd ("block: update io_ticks when io hang") Signed-off-by: Haisu Wang <haisuwang@tencent.com> Reviewed-by: samuelliao <samuelliao@tencent.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220530064059.1120058-1-haisuwang@tencent.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christian König [Mon, 25 Apr 2022 12:22:12 +0000 (14:22 +0200)]
dma-buf: generalize dma_fence unwrap & merging v3
Introduce a dma_fence_unwrap_merge() macro which allows to unwrap fences
which potentially can be containers as well and then merge them back
together into a flat dma_fence_array.
v2: rename the function, add some more comments about how the wrapper is
used, move filtering of signaled fences into the unwrap iterator,
add complex selftest which covers more cases.
v3: fix signaled fence filtering once more
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
Set microphone pins 0x18 (rear) and 0x19 (front) to VREF_50 to fix the
microphone noise on ASUS TUF B550M-PLUS which uses the ALCS1200A codec.
The initial value was VREF_80.
The same issue is also present on Windows using both the default Windows
driver and all tested Realtek drivers before version 6.0.9049.1. Comparing
Realtek driver 6.0.9049.1 (the first one without the microphone noise) to
Realtek driver 6.0.9047.1 (the last one with the microphone noise)
revealed that the fix is the result of setting pins 0x18 and 0x19 to
VREF_50.
This fix may also work for other boards that have been reported to have
the same microphone issue and use the ALC1150 and ALCS1200A codecs, since
these codecs are similar and the fix in the Realtek driver on Windows is
common for both. However, it is currently enabled only for ASUS TUF
B550M-PLUS as this is the only board that could be tested.
Yunhao Tian [Tue, 10 May 2022 03:02:19 +0000 (11:02 +0800)]
drm/mipi-dbi: align max_chunk to 2 in spi_transfer
In __spi_validate, there's a validation that no partial transfers
are accepted (xfer->len % w_size must be zero). When
max_chunk is not a multiple of bpw (e.g. max_chunk = 65535,
bpw = 16), the transfer will be rejected.
This patch aligns max_chunk to 2 bytes (the maximum value of bpw is 16),
so that no partial transfer will occur.
Wen Gong [Wed, 25 May 2022 13:22:47 +0000 (09:22 -0400)]
ath10k: fix regdomain info of iw reg set/get
When wlan load, firmware report the reg code with 0x6C for QCA6174,
it is world reg which checked by ath_is_world_regd(), then the reg
will be save into reg_world_copy of ath_common in ath_regd_init().
Later the regulatory of ath_common is updated to another country
code such as "US" in ath_reg_notifier_apply() by below call stack.
After that, regulatory_hint() is called in ath10k_mac_register()
and it lead "iw reg get" show two regdomain info as below.
At this moment, the two regdomain info is same, when run "iw reg set KR",
the global regdomain info changed to KR, but the regdomain of phy#0
does not change again. It leads inconsistent values between global and
phy#0 as below.
The initial reg code is 0x6C which saved in reg_world_copy of ath_common,
and the code US is updated from cfg80211 later, so ath10k should also
check the initial reg code before regulatory_hint().
After this fix, regdomain info is same between "iw reg get" and "iw reg
set xx", it does not have the regdomain info of phy#0 again.
This does not effect the channel list and power which ath10k used.
When the country code for regulatory_hint() in ath10k_mac_register()
is same with the global country code, then reg_set_rd_driver() of
cfg80211 called from crda which return -EALREADY to set_regdom() and
then update_all_wiphy_regulatory() will not be called while wlan load.
When run "iw reg set xx", reg_get_regdomain() which used by function
handle_channel() in net/wirelss/reg.c always use the regdomain
returned by get_cfg80211_regdom() because the initiator of last
regulatory_request is NL80211_REGDOM_SET_BY_USER, get_cfg80211_regdom()
is the global regdomain, then all the ieee80211_channel info is updated
in handle_channel() with the global regdomain.
Currently mac80211 doesn't calculate average signal when RSS(Receive side
scaling) is enabled from the driver, so average signal isn't printed in
the station dump. To address this issue, calculate the average signal
from RSSI within driver and display in the station dump.
Johan Hovold [Mon, 23 May 2022 14:32:58 +0000 (16:32 +0200)]
ath11k: fix IRQ affinity warning on shutdown
Make sure to clear the IRQ affinity hint also on shutdown to avoid
triggering a WARN_ON_ONCE() in __free_irq() when stopping MHI while
using a single MSI vector.
Johan Hovold [Sun, 22 May 2022 12:33:16 +0000 (15:33 +0300)]
ath11k: fix netdev open race
Make sure to allocate resources needed before registering the device.
This specifically avoids having a racing open() trigger a BUG_ON() in
mod_timer() when ath11k_mac_op_start() is called before the
mon_reap_timer as been set up.
I did not see this issue with next-20220310, but I hit it on every probe
with next-20220511. Perhaps some timing changed in between.
Ajay Singh [Tue, 24 May 2022 12:06:20 +0000 (12:06 +0000)]
wifi: wilc1000: add WPA3 SAE support
Enable SAE authentication for AP and STA mode. In STA mode, allow the
driver to pass the auth frames which are received from firmware to
userspace application(hostapd) so that SAE authentication is offloaded to
userspace.
Ajay Singh [Tue, 24 May 2022 12:06:20 +0000 (12:06 +0000)]
wifi: wilc1000: remove WEP security support
Deprecated WEP security for WILC driver as well as in firmware from
15.6 FW release onwards. After WEP security removal, freeup some codespace
which helped to add new features like WPA3 etc.
Ajay Singh [Tue, 24 May 2022 12:06:19 +0000 (12:06 +0000)]
wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down
For power-up sequence, WILC expects RESET set to high 5ms after making
chip_en(enable) so corrected chip power-up sequence by making RESET high.
For Power-Down sequence, the correct sequence make RESET and CHIP_EN low
without any extra delay.
Dan Carpenter [Tue, 17 May 2022 11:48:44 +0000 (14:48 +0300)]
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
If the copy_from_user() fails or the user gives invalid date then the
correct thing to do is to return a negative error code. (Currently it
returns success).
I made a copy additional related cleanups:
1) There is no need to check "buffer" for NULL. That's handled by
copy_from_user().
2) The "h2c_len" variable cannot be negative because it is unsigned
and because sscanf() does not return negative error codes.
Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/YoOLnDkHgVltyXK7@kili
Larry Finger [Tue, 24 May 2022 15:37:16 +0000 (10:37 -0500)]
wifi: rtw88: Fix Sparse warning for rtw8821c_hw_spec
Sparse lists the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8821c.c
drivers/net/wireless/realtek/rtw88/rtw8821c.c:1880:22: warning: symbol 'rtw8821c_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8821c_hw_spec
occurs in rtw8821ce.h, which is not included in rtw8821c.h. That line is
moved, and the now empty file rtw8821ce.h is deleted.
Larry Finger [Tue, 24 May 2022 15:36:20 +0000 (10:36 -0500)]
wifi: rtw88: Fix Sparse warning for rtw8723d_hw_spec
Sparse lists the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8723d.c
drivers/net/wireless/realtek/rtw88/rtw8723d.c:2704:22: warning: symbol 'rtw8723d_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8723d_hw_spec
occurs in rtw8723de.h, which is not included in rtw8723d.h. That line is
moved, and the now empty file rtw8723de.h is deleted.
Larry Finger [Tue, 24 May 2022 15:36:19 +0000 (10:36 -0500)]
wifi: rtw88: Fix Sparse warning for rtw8822c_hw_spec
Sparse reports the following:
CHECK drivers/net/wireless/realtek/rtw88/rtw8822c.c
drivers/net/wireless/realtek/rtw88/rtw8822c.c:5313:22: warning: symbol 'rtw8822c_hw_spec' was not declared. Should it be static?
The warning arises because the external declaration for rtw8822c_hw_spec
occurs in rtw8822ce.h, which is not included in rtw8822c.h. That line is
moved, and the now empty file rtw8822ce.h is deleted.
projects / people / ms / linux.git / log
