From the kernel's perspective, (pre-CSF, "Job Manager") Valhall is more
or less compatible with Bifrost, although they differ to userspace. Add
a compatible for Valhall to the existing Bifrost bindings documentation.
As the first SoC with a Valhall GPU receiving mainline support, add a
specific compatible for the MediaTek MT8192, which instantiates a
Mali-G57.
v2: Change compatible to arm,mali-valhall-jm (Daniel Stone).
Eddie James [Wed, 25 May 2022 16:58:52 +0000 (11:58 -0500)]
spi: core: Display return code when failing to transfer message
All the other calls to the controller driver display the error
return code. The return code is helpful to understand what went
wrong, so include it when failing to transfer one message.
David Lin [Thu, 26 May 2022 12:13:02 +0000 (20:13 +0800)]
ASoC: Intel: common: fix typo for tplg naming
Correct typo form sof-adl-mx98360a-nau8825.tplg to
sof-adl-max98360a-nau8825.tplg. The reason is tplg naming without naming
limitaion of length. It will be consistency with sof topology generation.
Jonathan Liu [Mon, 23 May 2022 13:01:44 +0000 (23:01 +1000)]
drm: bridge: icn6211: Adjust clock phase using SYS_CTRL_1
The code from [1] sets SYS_CTRL_1 to different values depending on the
desired clock phase (0, 1/4, 1/2 or 3/4). A clock phase of 0 aligns the
positive edge of the clock with the pixel data while other values delay
the clock by a fraction of the clock period. A clock phase of 1/2 aligns
the negative edge of the clock with the pixel data.
The driver currently hard codes SYS_CTRL_1 to 0x88 which corresponds to
aligning the positive edge of the clock with the pixel data. This won't
work correctly for panels that require aligning the negative edge of the
clock with the pixel data.
Adjust the clock phase to 0 if DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE is
present in bus_flags, otherwise adjust the clock phase to 1/2 as
appropriate for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE.
Rob Herring [Wed, 25 May 2022 20:56:26 +0000 (15:56 -0500)]
dt-bindings: display: ingenic,jz4780-hdmi: Drop undocumented 'ddc-i2c-bus'
While 'ddc-i2c-bus' is a common property, it should be in a connector
node rather than the HDMI bridge node as the I2C bus goes to a
connector and not the HDMI block. Drop it from the example.
Fabio Estevam [Wed, 25 May 2022 21:53:16 +0000 (18:53 -0300)]
drm: bridge: adv7511: Move CEC definitions to adv7511_cec.c
ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[]
are only used inside adv7511_cec.c.
Move their definitions to this file to avoid the following build
warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected:
drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com> Fixes: ab0af093bf90 ("drm: bridge: adv7511: use non-legacy mode for CEC RX") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com
Shradha Gupta [Mon, 16 May 2022 04:50:58 +0000 (21:50 -0700)]
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
Add missing cleanup in balloon_probe() if the call to
balloon_connect_vsp() fails. Also correctly handle cleanup in
balloon_remove() when dm_state is DM_INIT_ERROR because
balloon_resume() failed.
Saurabh Sengar [Wed, 25 May 2022 11:27:02 +0000 (04:27 -0700)]
scsi: storvsc: Removing Pre Win8 related logic
The latest storvsc code has already removed the support for windows 7 and
earlier. There is still some code logic remaining which is there to support
pre Windows 8 OS. This patch removes these stale logic.
This patch majorly does three things :
1. Removes vmscsi_size_delta and its logic, as the vmscsi_request struct is
same for all the OS post windows 8 there is no need of delta.
2. Simplify sense_buffer_size logic, as there is single buffer size for
all the post windows 8 OS.
3. Embed the vmscsi_win8_extension structure inside the vmscsi_request,
as there is no separate handling required for different OS.
Ashutosh Dixit [Wed, 25 May 2022 13:19:20 +0000 (06:19 -0700)]
drm/i915/gt: Fix memory leaks in per-gt sysfs
All kmalloc'd kobjects need a kobject_put() to free memory. For example in
previous code, kobj_gt_release() never gets called. The requirement of
kobject_put() now results in a slightly different code organization.
Dale B Stimson [Wed, 25 May 2022 13:19:19 +0000 (06:19 -0700)]
drm/i915/gt: Add media RP0/RPn to per-gt sysfs
Retrieve RP0 and RPn freq for media IP from PCODE and display in per-gt
sysfs. This patch adds the following files to gt/gtN sysfs:
* media_RP0_freq_mhz
* media_RPn_freq_mhz
v2: Fixed commit author (Rodrigo)
v3: Convert to new uncore interface for pcode functions
v4: Adapt to intel_pcode.* function rename
v5: #include "intel_pcode.h" in alphabetical order (Tvrtko)
Ashutosh Dixit [Wed, 25 May 2022 13:19:17 +0000 (06:19 -0700)]
drm/i915/gt: Add media freq factor to per-gt sysfs
Expose new sysfs to program and retrieve media freq factor. Factor values
of 0 (dynamic), 0.5 and 1.0 are supported via a u8.8 fixed point
representation (corresponding to integer values of 0, 128 and 256
respectively).
Media freq factor is converted to media_ratio_mode for GuC. It is
programmed into GuC using H2G SLPC interface. It is retrieved from GuC
through a register read. A cached media_ratio_mode is maintained to
preserve set values across GuC resets.
This patch adds the following sysfs files to gt/gtN sysfs:
* media_freq_factor
* media_freq_factor.scale
In addition, CONFIG_PCI_DRIVERS_GENERIC is not set, so pci_remap_iospace()
in arch/mips/pci/pci-generic.c is not built too.
#ifdef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, ...)
For the above reasons, undefined reference pci_remap_iospace() looks like
reasonable.
Here are simple steps to reproduce used with gcc and defconfig:
cd mips.git
make vocore2_defconfig # set RALINK, SOC_MT7620, PCI_DRIVERS_LEGACY
make menuconfig # set PCI
make
there exists the following build error:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
drivers/pci/pci.o: In function `devm_pci_remap_iospace':
pci.c:(.text+0x4d24): undefined reference to `pci_remap_iospace'
Makefile:1158: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC can fix the build
error, with this patch, no build error remains. This patch is similar with
commit e538e8649892 ("MIPS: asm: pci: define arch-specific
'pci_remap_iospace()' dependent on 'CONFIG_PCI_DRIVERS_GENERIC'").
Fixes: 09d97da660ff ("MIPS: Only define pci_remap_iospace() for Ralink") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Daniel Borkmann [Tue, 24 May 2022 22:56:18 +0000 (00:56 +0200)]
net, neigh: Set lower cap for neigh_managed_work rearming
Yuwei reported that plain reuse of DELAY_PROBE_TIME to rearm work queue
in neigh_managed_work is problematic if user explicitly configures the
DELAY_PROBE_TIME to 0 for a neighbor table. Such misconfig can then hog
CPU to 100% processing the system work queue. Instead, set lower interval
bound to HZ which is totally sufficient. Yuwei is additionally looking
into making the interval separately configurable from DELAY_PROBE_TIME.
liuyacan [Wed, 25 May 2022 08:54:08 +0000 (16:54 +0800)]
net/smc: set ini->smcrv2.ib_dev_v2 to NULL if SMC-Rv2 is unavailable
In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc and register rmb, but the latter may fail. In this case,
the pointer should be reset.
luyun [Wed, 25 May 2022 03:18:19 +0000 (11:18 +0800)]
selftests/net: enable lo.accept_local in psock_snd test
The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable
For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn> Reviewed-by: Jackie Liu <liuyun01@kylinos.cn> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ethernet: ti: am65-cpsw: Fix fwnode passed to phylink_create()
am65-cpsw-nuss driver incorrectly uses fwnode member of common
ethernet device's "struct device_node" instead of using fwnode
member of the port's "struct device_node" in phylink_create().
This results in all ports having the same phy data when there
are multiple ports with their phy properties populated in their
respective nodes rather than the common ethernet device node.
Fix it here by using fwnode member of the port's node.
Jakub Kicinski [Thu, 26 May 2022 04:36:19 +0000 (21:36 -0700)]
Merge branch 'amt-fix-several-bugs'
Taehee Yoo says:
====================
amt: fix several bugs
This patchset fixes several bugs in amt module
First patch fixes typo.
Second patch fixes wrong return value of amt_update_handler().
A relay finds a tunnel if it receives an update message from the gateway.
If it can't find a tunnel, amt_update_handler() should return an error,
not success. But it always returns success.
Third patch fixes a possible memory leak in amt_rcv().
A skb would not be freed if an amt interface doesn't have a socket.
====================
Taehee Yoo [Mon, 23 May 2022 16:17:08 +0000 (16:17 +0000)]
amt: fix possible memory leak in amt_rcv()
If an amt receives packets and it finds socket.
If it can't find a socket, it should free a received skb.
But it doesn't.
So, a memory leak would possibly occur.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 23 May 2022 16:17:07 +0000 (16:17 +0000)]
amt: fix return value of amt_update_handler()
If a relay receives an update message, it lookup a tunnel.
and if there is no tunnel for that message, it should be treated
as an error, not a success.
But amt_update_handler() returns false, which means success.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 23 May 2022 16:17:06 +0000 (16:17 +0000)]
amt: fix typo in amt
AMT_MSG_TEARDOWM is defined,
But it should be AMT_MSG_TEARDOWN.
Fixes: b9022b53adad ("amt: add control plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alan Previn [Fri, 11 Mar 2022 00:43:11 +0000 (16:43 -0800)]
drm/i915/reset: Fix error_state_read ptr + offset use
Fix our pointer offset usage in error_state_read
when there is no i915_gpu_coredump but buf offset
is non-zero.
This fixes a kernel page fault can happen when
multiple tests are running concurrently in a loop
and one is producing engine resets and consuming
the i915 error_state dump while the other is
forcing full GT resets. (takes a while to trigger).
Linus Torvalds [Thu, 26 May 2022 02:34:40 +0000 (19:34 -0700)]
Merge tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Dave Chinner:
"This is a big update with lots of new code. The summary below them
all, so I'll just touch on teh higlights. The two main new features
are Large Extent Counts and Logged Attribute Replay - these are two
new foundational features that we are building more complex future
features on top of.
For upcoming functionality, we need to be able to store hundreds of
millions of xattrs per inode. The Large Extent Count feature removes
the limits that prevent this scale of xattr storage, and while we were
modifying the on disk extent count format we also increased the number
of data extents we support per inode from 2^32 to 2^47.
We also need to be able to modify xattrs as part of larger atomic
transactions rather than as standalone transactions. The Logged
Attribute Replay feature introduces the infrastructure that allows us
to use intents to record the attribute modifications in the journal
before we start them, hence allowing other atomic transactions to log
attribute modification intents and then defer the actual modification
to later. If we then crash, log recovery then guarantees that the
attribute is replayed in the context of the atomic transaction that
logged the intent.
A significant chunk of the commits in this merge are for the base
attribute replay functionality along with fixes, improvements and
cleanups related to this new functioanlity. Allison deserves a big
round of thanks for her ongoing work to get this functionality into
XFS.
There are also many other smaller changes and improvements, so overall
this is one of the bigger XFS merge requests in some time.
I will be following up next week with another smaller pull request -
we already have another round of fixes and improvements to the logged
attribute replay functionality just about ready to go. They'll soak
and test over the next week, and I'll send a pull request for them
near the end of the merge window.
Summary:
- support for printk message indexing.
- large extent counts to provide support for up to 2^47 data extents
and 2^32 attribute extents, allowing us to scale beyond 4 billion
data extents to billions of xattrs per inode.
- conversion of various flags fields to be consistently declared as
unsigned bit fields.
- improvements to realtime extent accounting and converts them to
per-cpu counters to match all the other block and inode accounting.
- reworks core log formatting code to reduce iterations, have a
shorter, cleaner fast path and generally be easier to understand
and maintain.
- improvements to rmap btree searches that reduce overhead by up to
30% resulting in xfs_scrub runtime reductions of 15%.
- improvements to reflink that remove the size limitations in
remapping operations and greatly reduce the size of transaction
reservations.
- reworks the minimum log size calculations to allow us to change
transaction reservations without changing the minimum supported log
size.
- removal of quota warning support as it has never been used on
Linux.
- intent whiteouts to allow us to cancel intents that are completed
entirely in memory rather than having use CPU and disk bandwidth
formatting and writing them into the journal when it is not
necessary. This makes rmap, reflink and extent freeing slightly
more efficient, but provides massive improvements for....
- Logged Attribute Replay feature support. This is a fundamental
change to the way we modify attributes, laying the foundation for
future integration of attribute modifications as part of other
atomic transactional operations the filesystem performs.
- Lots of cleanups and fixes for the logged attribute replay
functionality"
* tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (124 commits)
xfs: can't use kmem_zalloc() for attribute buffers
xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework
xfs: use XFS_DA_OP flags in deferred attr ops
xfs: remove xfs_attri_remove_iter
xfs: switch attr remove to xfs_attri_set_iter
xfs: introduce attr remove initial states into xfs_attr_set_iter
xfs: xfs_attr_set_iter() does not need to return EAGAIN
xfs: clean up final attr removal in xfs_attr_set_iter
xfs: remote xattr removal in xfs_attr_set_iter() is conditional
xfs: XFS_DAS_LEAF_REPLACE state only needed if !LARP
xfs: split remote attr setting out from replace path
xfs: consolidate leaf/node states in xfs_attr_set_iter
xfs: kill XFS_DAC_LEAF_ADDNAME_INIT
xfs: separate out initial attr_set states
xfs: don't set quota warning values
xfs: remove warning counters from struct xfs_dquot_res
xfs: remove quota warning limit from struct xfs_quota_limits
xfs: rework deferred attribute operation setup
xfs: make xattri_leaf_bp more useful
...
Linus Torvalds [Thu, 26 May 2022 02:29:54 +0000 (19:29 -0700)]
Merge tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"The biggest part of this is support for fsnotify inode marks that
don't pin inodes in memory but rather get evicted together with the
inode (they are useful if userspace needs to exclude receipt of events
from potentially large subtrees using fanotify ignore marks).
There is also a fix for more consistent handling of events sent to
parent and a fix of sparse(1) complaints"
* tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: fix incorrect fmode_t casts
fsnotify: consistent behavior for parent not watching children
fsnotify: introduce mark type iterator
fanotify: enable "evictable" inode marks
fanotify: use fsnotify group lock helpers
fanotify: implement "evictable" inode marks
fanotify: factor out helper fanotify_mark_update_flags()
fanotify: create helper fanotify_mark_user_flags()
fsnotify: allow adding an inode mark without pinning inode
dnotify: use fsnotify group lock helpers
nfsd: use fsnotify group lock helpers
audit: use fsnotify group lock helpers
inotify: use fsnotify group lock helpers
fsnotify: create helpers for group mark_mutex lock
fsnotify: make allow_dups a property of the group
fsnotify: pass flags argument to fsnotify_alloc_group()
fsnotify: fix wrong lockdep annotations
inotify: move control flags from mask to mark flags
inotify: show inotify mask flags in proc fdinfo
Linus Torvalds [Thu, 26 May 2022 02:24:06 +0000 (19:24 -0700)]
Merge tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback and ext2 cleanups from Jan Kara:
"One small ext2 cleanup and one writeback spelling fix"
* tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix typo in comment
fs: ext2: Fix duplicate included linux/dax.h
Linus Torvalds [Thu, 26 May 2022 02:18:36 +0000 (19:18 -0700)]
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
Linus Torvalds [Thu, 26 May 2022 02:09:48 +0000 (19:09 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
Linus Torvalds [Wed, 25 May 2022 23:55:16 +0000 (16:55 -0700)]
Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Linus Torvalds [Wed, 25 May 2022 23:18:27 +0000 (16:18 -0700)]
Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Intel have enabled DG2 on certain SKUs for laptops, AMD has started
some new GPU support, msm has user allocated VA controls
i915:
- DG2 laptop PCI-IDs ("motherboard down")
- Initial RPL-P PCI IDs
- compute engine ABI
- DG2 Tile4 support
- DG2 CCS clear color compression support
- DG2 render/media compression formats support
- ATS-M platform info
- RPL-S PCI IDs added
- Bump ADL-P DMC version to v2.16
- Support static DRRS
- Support multiple eDP/LVDS native mode refresh rates
- DP HDR support for HSW+
- Lots of display refactoring + fixes
- GuC hwconfig support and query
- sysfs support for multi-tile
- fdinfo per-client gpu utilisation
- add geometry subslices query
- fix prime mmap with LMEM
- fix vm open count and remove vma refcounts
- contiguous allocation fixes
- steered register write support
- small PCI BAR enablement
- GuC error capture support
- sunset igpu legacy mmap support for newer devices
- GuC version 70.1.1 support
amdgpu:
- Initial SoC21 support
- SMU 13.x enablement
- SMU 13.0.4 support
- ttm_eu cleanups
- USB-C, GPUVM updates
- TMZ fixes for RV
- RAS support for VCN
- PM sysfs code cleanup
- DC FP rework
- extend CG/PG flags to 64-bit
- SI dpm lockdep fix
- runtime PM fixes
amdkfd:
- RAS/SVM fixes
- TLB flush fixes
- CRIU GWS support
- ignore bogus MEC signals more efficiently
msm:
- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- DPU: DSC (Display Stream Compression) support
- DP: eDP support
- DP: conversion to use drm_bridge and drm_bridge_connector
- Merge DPU1 and MDP5 MDSS driver
- DPU: writeback support
nouveau:
- make some structures static
- make some variables static
- switch to drm_gem_plane_helper_prepare_fb
radeon:
- misc fixes/cleanups
mxsfb:
- rework crtc mode setting
- LCDIF CRC support
vc4:
- add a CL submission tracepoint
- HDMI YUV support
- HDMI/clock improvements
- drop is_hdmi caching
virtio:
- remove restriction of non-zero blob types
vmwgfx:
- support for cursormob and cursorbypass 4
- fence improvements
tidss:
- reset DISPC on startup
solomon:
- SPI support
- DT improvements
sun4i:
- allwinner D1 support
- drop is_hdmi caching
imx:
- use swap() instead of open-coding
- use devm_platform_ioremap_resource
- remove redunant initializations
ast:
- Displayport support
rockchip:
- Refactor IOMMU initialisation
- make some structures static
- replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
- support swapped YUV formats,
- clock improvements
- rk3568 support
- VOP2 support
mediatek:
- MT8186 support
tegra:
- debugabillity improvements"
* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
drm/i915/dsi: fix VBT send packet port selection for ICL+
drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
drm/i915/reg: fix undefined behavior due to shift overflowing the constant
drm/i915/gt: Fix use of static in macro mismatch
drm/i915/audio: fix audio code enable/disable pipe logging
drm/i915: Fix CFI violation with show_dynamic_id()
drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
drm/i915/gt: Fix build error without CONFIG_PM
drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
drm/msm: don't free the IRQ if it was not requested
drm/msm/dpu: limit writeback modes according to max_linewidth
drm/amd: Don't reset dGPUs if the system is going to s2idle
drm/amdgpu: Unmap legacy queue when MES is enabled
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm: Fix fb plane offset calculation
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
drm/msm/dsi: don't powerup at modeset time for parade-ps8640
drm/rockchip: Change register space names in vop2
dt-bindings: display: rockchip: make reg-names mandatory for VOP2
...
Linus Torvalds [Wed, 25 May 2022 21:46:09 +0000 (14:46 -0700)]
Merge tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Intel PT:
- Allow hardware tracing on KVM test programs. In this case, the VM
is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same
virtual addresses.
- Improve documentation:
- Add link to perf wiki's page
A handful of functions unused functions were enabled during XIP builds,
which themselves didn't build correctly. This just disables the
functions entirely.
RISC-V: Split out the XIP fixups into their own file
This was broken by the original refactoring (as the XIP definitions
depend on <asm/pgtable.h>) and then more broken by the merge (as I
accidentally took the old version). This fixes both breakages, while
also pulling this out of <asm/asm.h> to avoid polluting most assembly
files with the XIP fixups.
Linus Torvalds [Wed, 25 May 2022 21:37:00 +0000 (14:37 -0700)]
Merge tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull checkpatch update from Gustavo Silva:
"kvmalloc() and kvzalloc() functions have now 2-factor multiplication
argument forms kvmalloc_array() and kvcalloc().
Add alloc-with-multiplies checks for these new functions"
* tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
checkpatch: add new alloc functions to alloc with multiplies check
Li Huafei [Wed, 27 Apr 2022 03:41:19 +0000 (11:41 +0800)]
tracing: Reset the function filter after completing trampoline/graph selftest
The direct trampoline and graph coexistence test sets global_ops to
trace only 'trace_selftest_dynamic_test_func', but does not reset it
after the test is completed, resulting in the function filter being set
already after the system starts. Although it can be reset through the
tracefs interface, it is more or less confusing to the user, and we
should reset it to trace all functions after the trampoline/graph test
completes.
tracing: Have event format check not flag %p* on __get_dynamic_array()
The print fmt check against trace events to make sure that the format does
not use pointers that may be freed from the time of the trace to the time
the event is read, gives a false positive on %pISpc when reading data that
was saved in __get_dynamic_array() when it is perfectly fine to do so, as
the data being read is on the ring buffer.
Link: https://lore.kernel.org/all/20220407144524.2a592ed6@canb.auug.org.au/ Cc: stable@vger.kernel.org Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Wed, 25 May 2022 20:56:57 +0000 (13:56 -0700)]
Merge tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull misc hardening updates from Gustavo Silva:
"Replace a few open-coded instances with size_t saturating arithmetic
helpers"
* tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
virt: acrn: Prefer array_size and struct_size over open coded arithmetic
afs: Prefer struct_size over open coded arithmetic
Linus Torvalds [Wed, 25 May 2022 20:52:24 +0000 (13:52 -0700)]
Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wstringop-overflow fixes from Gustavo Silva:
"Fix some -Wstringop-overflow warnings when building with GCC-11. All
the patches have been in linux-next during the last development cycle.
This is part of the ongoing efforts to globally enable
-Wstringop-overflow"
* tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()
drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
Congyu Liu [Mon, 23 May 2022 05:35:31 +0000 (05:35 +0000)]
kcov: update pos before writing pc in trace function
In __sanitizer_cov_trace_pc(), previously we write pc before updating pos.
However, some early interrupt code could bypass check_kcov_mode() check
and invoke __sanitizer_cov_trace_pc(). If such interrupt is raised
between writing pc and updating pos, the pc could be overitten by the
recursive __sanitizer_cov_trace_pc().
As suggested by Dmitry, we cold update pos before writing pc to avoid such
interleaving.
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
When user_dlm_destroy_lock failed, it didn't clean up the flags it set
before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of
lock is still in used, next time when unlink invokes this function, it
will return succeed, and then unlink will remove inode and dentry if lock
is not in used(file closed), but the dlm lock is still linked in dlm lock
resource, then when bast come in, it will trigger a panic due to
user-after-free. See the following panic call trace. To fix this,
USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should
be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink
fail.
For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN,
USER_LOCK_BUSY is also required to be cleared. Even though spin lock is
released in between, but USER_LOCK_IN_TEARDOWN is still set, for
USER_LOCK_BUSY, if before every place that waits on this flag,
USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow
waits on the busy flag set by user_dlm_destroy_lock(), then we can
simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix
user_dlm_cluster_lock() which is the only function not following this.
Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Junxiao Bi [Wed, 18 May 2022 23:52:23 +0000 (16:52 -0700)]
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
The following function is the only place that checks USER_LOCK_ATTACHED.
This flag is set when lock request is granted through user_ast() and only
the following function will clear it.
Checking of this flag here is to make sure ocfs2_dlm_unlock is not issued
if this lock is never granted. For example, lock file is created and then
get removed, open file never happens.
Clearing the flag here is not necessary because this is the only function
that checks it, if another flow is executing user_dlm_destroy_lock(), it
will bail out at the beginning because of USER_LOCK_IN_TEARDOWN and never
check USER_LOCK_ATTACHED. Drop the clear, so we don't need take care of
it for the following error handling patch.
int user_dlm_destroy_lock(struct user_lock_res *lockres)
{
...
status = 0;
if (!(lockres->l_flags & USER_LOCK_ATTACHED)) {
spin_unlock(&lockres->l_lock);
goto bail;
}
status = ocfs2_dlm_unlock(conn, &lockres->l_lksb, DLM_LKF_VALBLK);
if (status) {
user_log_dlm_error("ocfs2_dlm_unlock", status, lockres);
goto bail;
}
...
}
V1 discussion with Joseph:
https://lore.kernel.org/all/7b620c53-0c45-da2c-829e-26195cbe7d4e@linux.alibaba.com/T/
Link: https://lkml.kernel.org/r/20220518235224.87100-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Roper [Tue, 24 May 2022 23:59:06 +0000 (16:59 -0700)]
drm/i915/hwconfig: Future-proof platform checks
PVC also has a hwconfig table. Actually the current expectation is that
all future platforms will have hwconfig, so let's just change the
condition to an IP version check so that we don't need to keep updating
this for each new platform that shows up.
Linus Torvalds [Wed, 25 May 2022 19:22:58 +0000 (12:22 -0700)]
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Linus Torvalds [Wed, 25 May 2022 18:47:25 +0000 (11:47 -0700)]
Merge branch 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
Jeff Layton [Mon, 23 May 2022 17:22:09 +0000 (13:22 -0400)]
MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer"
Xiubo has graciously volunteered to take over for me as the Linux cephfs
client maintainer. Make it official by changing myself to be a
"Reviewer" for libceph and ceph.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Acked-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Luís Henriques [Mon, 23 May 2022 16:09:51 +0000 (17:09 +0100)]
ceph: fix decoding of client session messages flags
The cephfs kernel client started to show the message:
ceph: mds0 session blocklisted
when mounting a filesystem. This is due to the fact that the session
messages are being incorrectly decoded: the skip needs to take into
account the 'len'.
While there, fixed some whitespaces too.
Cc: stable@vger.kernel.org Fixes: e1c9788cb397 ("ceph: don't rely on error_string to validate blocklisted session.") Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Wed, 18 May 2022 14:49:26 +0000 (22:49 +0800)]
ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE
If the task is placed in the TASK_INTERRUPTIBLE state it will sleep
until either something explicitly wakes it up, or a non-masked signal
is received. Switch to TASK_KILLABLE to avoid the noises.
Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Colin Ian King [Wed, 18 May 2022 08:55:08 +0000 (09:55 +0100)]
ceph: remove redundant variable ino
Variable ino is being assigned a value that is never read. The variable
and assignment are redundant, remove it.
Cleans up clang scan build warning:
warning: Although the value stored to 'ino' is used in the enclosing
expression, the value is never actually read from 'ino'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Wed, 27 Apr 2022 06:14:41 +0000 (14:14 +0800)]
ceph: try to queue a writeback if revoking fails
If the pagecaches writeback just finished and the i_wrbuffer_ref
reaches zero it will try to trigger ceph_check_caps(). But if just
before ceph_check_caps() the i_wrbuffer_ref could be increased
again by mmap/cache write, then the Fwb revoke will fail.
We need to try to queue a writeback in this case instead of
triggering the writeback by BDI's delayed work per 5 seconds.
URL: https://tracker.ceph.com/issues/46904
URL: https://tracker.ceph.com/issues/55377 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing a mount using as base a directory that has 'max_bytes' quotas
statfs uses that value as the total; if a subdirectory is used instead,
the same 'max_bytes' too in statfs, unless there is another quota set.
Unfortunately, if this subdirectory only has the 'max_files' quota set,
then statfs uses the filesystem total. Fix this by making sure we only
lookup realms that contain the 'max_bytes' quota.
Cc: Ryan Taylor <rptaylor@uvic.ca>
URL: https://tracker.ceph.com/issues/55090 Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_netfs_issue_op_inline() will send a getattr(Fsr) request to
mds.1.
4, then the mds.1 will request the rd lock for CInode::filelock from
the auth mds.0, the mds.0 will do the CInode::filelock state transation
from excl --> sync, but it need to revoke the Fxwb caps back from the
clients.
While the kernel client has aleady held the Fwb caps and waiting for
the getattr(Fsr).
It's deadlock!
URL: https://tracker.ceph.com/issues/55377 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Sun, 24 Apr 2022 09:35:53 +0000 (17:35 +0800)]
ceph: redirty the page for writepage on failure
When run out of memories we should redirty the page before failing
the writepage. Or we will hit BUG_ON(folio_get_private(folio)) in
ceph_dirty_folio().
URL: https://tracker.ceph.com/issues/55421 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Thu, 21 Apr 2022 03:26:40 +0000 (11:26 +0800)]
ceph: try to choose the auth MDS if possible for getattr
If any 'x' caps is issued we can just choose the auth MDS instead
of the random replica MDSes. Because only when the Locker is in
LOCK_EXEC state will the loner client could get the 'x' caps. And
if we send the getattr requests to any replica MDS it must auth pin
and tries to rdlock from the auth MDS, and then the auth MDS need
to do the Locker state transition to LOCK_SYNC. And after that the
lock state will change back.
This cost much when doing the Locker state transition and usually
will need to revoke caps from clients.
URL: https://tracker.ceph.com/issues/55240 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Wed, 20 Apr 2022 05:13:02 +0000 (13:13 +0800)]
ceph: disable updating the atime since cephfs won't maintain it
Since CephFS makes no attempt to maintain atime, we shouldn't
try to update it in mmap and generic read cases and ignore updating
it in direct and sync read cases.
And even we update it in mmap and generic read cases we will drop
it and won't sync it to MDS. And we are seeing the atime will be
updated and then dropped to the floor again and again.
Xiubo Li [Tue, 19 Apr 2022 00:58:49 +0000 (08:58 +0800)]
ceph: flush the mdlog for filesystem sync
Before waiting for a request's safe reply, we will send the mdlog flush
request to the relevant MDS. And this will also flush the mdlog for all
the other unsafe requests in the same session, so we can record the last
session and no need to flush mdlog again in the next loop. But there
still have cases that it may send the mdlog flush requst twice or more,
but that should be not often.
Rename wait_unsafe_requests() to
flush_mdlog_and_wait_mdsc_unsafe_requests() to make it more
descriptive.
[xiubli: fold in MDS request refcount leak fix from Jeff]
URL: https://tracker.ceph.com/issues/55284
URL: https://tracker.ceph.com/issues/55411 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Mon, 11 Apr 2022 01:59:09 +0000 (09:59 +0800)]
ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check
From the posix and the initial statx supporting commit comments,
the AT_STATX_DONT_SYNC is a lightweight stat and the
AT_STATX_FORCE_SYNC is a heaverweight one. And also checked all
the other current usage about these two flags they are all doing
the same, that is only when the AT_STATX_FORCE_SYNC is not set
and the AT_STATX_DONT_SYNC is set will they skip sync retriving
the attributes from storage.
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Thu, 7 Apr 2022 05:12:42 +0000 (13:12 +0800)]
ceph: no need to invalidate the fscache twice
Fixes: 400e1286c0ec3 ("ceph: conversion to new fscache API") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jakob Koschel [Thu, 31 Mar 2022 21:53:29 +0000 (23:53 +0200)]
ceph: replace usage of found with dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean.
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Jakob Koschel [Thu, 31 Mar 2022 21:53:28 +0000 (23:53 +0200)]
ceph: use dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable.
Xiubo Li [Wed, 30 Mar 2022 04:21:12 +0000 (12:21 +0800)]
ceph: update the dlease for the hashed dentry when removing
The MDS will always refresh the dentry lease when removing the files
or directories. And if the dentry is still hashed, we can update
the dentry lease and no need to do the lookup from the MDS later.
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Wed, 30 Mar 2022 06:39:33 +0000 (14:39 +0800)]
ceph: stop retrying the request when exceeding 256 times
The type of 'r_attempts' in kernel 'ceph_mds_request' is 'int',
while in 'ceph_mds_request_head' the type of 'num_retry' is '__u8'.
So in case the request retries exceeding 256 times, the MDS will
receive a incorrect retry seq.
In this case it's ususally a bug in MDS and continue retrying the
request makes no sense. For now let's limit it to 256. In future
this could be fixed in ceph code, so avoid using the hardcode here.
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Tue, 29 Mar 2022 04:48:01 +0000 (12:48 +0800)]
ceph: stop forwarding the request when exceeding 256 times
The type of 'num_fwd' in ceph 'MClientRequestForward' is 'int32_t',
while in 'ceph_mds_request_head' the type is '__u8'. So in case
the request bounces between MDSes exceeding 256 times, the client
will get stuck.
In this case it's ususally a bug in MDS and continue bouncing the
request makes no sense.
URL: https://tracker.ceph.com/issues/55130 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luís Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Mon, 28 Mar 2022 02:25:35 +0000 (10:25 +0800)]
ceph: remove unused CEPH_MDS_LEASE_RELEASE related code
The ceph_mdsc_lease_release() has been removed by commit 8aa152c77890
(ceph: remove ceph_mdsc_lease_release). ceph_mdsc_lease_send_msg will
never be called with CEPH_MDS_LEASE_RELEASE.
Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jakob Koschel [Thu, 24 Mar 2022 07:20:50 +0000 (08:20 +0100)]
rbd: replace usage of found with dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean.
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Venky Shankar [Thu, 10 Mar 2022 14:34:19 +0000 (09:34 -0500)]
ceph: allow ceph.dir.rctime xattr to be updatable
`rctime' has been a pain point in cephfs due to its buggy
nature - inconsistent values reported and those sorts.
Fixing rctime is non-trivial needing an overall redesign
of the entire nested statistics infrastructure.
As a workaround, PR
http://github.com/ceph/ceph/pull/37938
allows this extended attribute to be manually set. This allows
users to "fixup" inconsistent rctime values. While this sounds
messy, its probably the wisest approach allowing users/scripts
to workaround buggy rctime values.
The above PR enables Ceph MDS to allow manually setting
rctime extended attribute with the corresponding user-land
changes. We may as well allow the same to be done via kclient
for parity.
Linus Torvalds [Wed, 25 May 2022 18:32:53 +0000 (11:32 -0700)]
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
Linus Torvalds [Wed, 25 May 2022 18:30:21 +0000 (11:30 -0700)]
Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
Linus Torvalds [Wed, 25 May 2022 18:17:41 +0000 (11:17 -0700)]
Merge tag 'docs-5.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are
seeing some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation.
This is an LSFMM outcome that, it is hoped, will help encourage
developers to fill in the many gaps. Optimism is eternal...but
hopefully it will work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc"
* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
docs: pdfdocs: Add space for chapter counts >= 100 in TOC
docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
input: Docs: correct ntrig.rst typo
input: Docs: correct atarikbd.rst typos
MAINTAINERS: Become the docs/zh_CN maintainer
docs/zh_CN: fix devicetree usage-model translation
mm,doc: Add new documentation structure
Documentation: drop more IDE boot options and ide-cd.rst
Documentation/process: use scripts/get_maintainer.pl on patches
MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
docs/trans/ja_JP/howto: Don't mention specific kernel versions
docs/ja_JP/SubmittingPatches: Request summaries for commit references
docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
docs/ja_JP/SubmittingPatches: Randy has moved
docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
docs/ja_JP/SubmittingPatches: Update GregKH links
Documentation/sysctl: document max_rcu_stall_to_panic
Documentation: add missing angle bracket in cgroup-v2 doc
Documentation: dev-tools: use literal block instead of code-block
docs/zh_CN: add vm numa translation
...
Yufen Yu [Wed, 25 May 2022 09:43:36 +0000 (17:43 +0800)]
f2fs: add f2fs_init_write_merge_io function
Almost all other initialization of variables in f2fs_fill_super are
extraced to a single function. Also do it for write_io[], which can
make code more clean.
This patch just refactors the code, theres no functional change.
Patrick Wang [Sat, 21 May 2022 08:38:24 +0000 (16:38 +0800)]
selftests: vm: add "test_hmm.sh" to TEST_FILES
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Patrick Wang [Sat, 21 May 2022 08:38:23 +0000 (16:38 +0800)]
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
Its premise was that cgroup reclaim cares about freeing memory inside the
cgroup, and demotion just moves them around within the cgroup limit.
Hence, pages from toptier nodes should be reclaimed directly.
However, with NUMA balancing now doing tier promotions, demotion is part
of the page aging process. Global reclaim demotes the coldest toptier
pages to secondary memory, where their life continues and from which they
have a chance to get promoted back. Essentially, tiered memory systems
have an LRU order that spans multiple nodes.
When cgroup reclaims pages coming off the toptier directly, there can be
colder pages on lower tier nodes that were demoted by global reclaim.
This is an aging inversion, not unlike if cgroups were to reclaim directly
from the active lists while there are inactive pages.
Proactive reclaim is another factor. The goal of that it is to offload
colder pages from expensive RAM to cheaper storage. When lower tier
memory is available as an intermediate layer, we want offloading to take
advantage of it instead of bypassing to storage.
Revert the patch so that cgroups respect the LRU order spanning the memory
hierarchy.
Of note is a specific undercommit scenario, where all cgroup limits in the
system add up to <= available toptier memory. In that case, shuffling
pages out to lower tiers first to reclaim them from there is inefficient.
This is something could be optimized/short-circuited later on (although
care must be taken not to accidentally recreate the aging inversion).
Let's ensure correctness first.
Link: https://lkml.kernel.org/r/20220518190911.82400-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jackie Liu [Wed, 18 May 2022 07:31:05 +0000 (15:31 +0800)]
mm/kfence: print disabling or re-enabling message
By printing information, we can friendly prompt the status change
information of kfence by dmesg and record by syslog.
Also, set kfence_enabled to false only when needed.
Link: https://lkml.kernel.org/r/20220518073105.3160335-1-liu.yun@linux.dev Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Co-developed-by: Marco Elver <elver@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Tue, 24 May 2022 19:47:56 +0000 (15:47 -0400)]
mm: fix a potential infinite loop in start_isolate_page_range()
In isolate_single_pageblock() called by start_isolate_page_range(), there
are some pageblock isolation issues causing a potential infinite loop when
isolating a page range. This is reported by Qian Cai.
1. the pageblock was isolated by just changing pageblock migratetype
without checking unmovable pages. Calling set_migratetype_isolate() to
isolate pageblock properly.
2. an off-by-one error caused migrating pages unnecessarily, since the page
is not crossing pageblock boundary.
3. migrating a compound page across pageblock boundary then splitting the
free page later has a small race window that the free page might be
allocated again, so that the code will try again, causing an potential
infinite loop. Temporarily set the to-be-migrated page's pageblock to
MIGRATE_ISOLATE to prevent that and bail out early if no free page is
found after page migration.
An additional fix to split_free_page() aims to avoid crashing in
__free_one_page(). When the free page is split at the specified
split_pfn_offset, free_page_order should check both the first bit of
free_page_pfn and the last bit of split_pfn_offset and use the smaller
one. For example, if free_page_pfn=0x10000, split_pfn_offset=0xc000,
free_page_order should first be 0x8000 then 0x4000, instead of 0x4000 then
0x8000, which the original algorithm did.
[akpm@linux-foundation.org: suppress min() warning] Link: https://lkml.kernel.org/r/20220524194756.1698351-1-zi.yan@sent.com Fixes: b2c9e2fbba3253 ("mm: make alloc_contig_range work at pageblock granularity") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Qian Cai <quic_qiancai@quicinc.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Muchun Song [Sat, 21 May 2022 07:41:03 +0000 (15:41 +0800)]
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
I have been focusing on mm for the past two years. e.g. developing,
fixing bugs, reviewing related to HugeTLB system. I would like to help
Mike and other people working on HugeTLB by reviewing their work.
When I first introduced the vmemmmap reduction, I forgot to update
MAINTAINERS file. Let's update it as well. And rename "HUGETLB
FILESYSTEM" to "HUGETLB SUBSYSTEM" since some files are not only related
to filesystem but also memory management (the name of FILESYSTEM cannot
cover this area).
Linus Torvalds [Wed, 25 May 2022 17:32:08 +0000 (10:32 -0700)]
Merge tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Offload writing printk() messages on consoles to per-console
kthreads.
It prevents soft-lockups when an extensive amount of messages is
printed. It was observed, for example, during boot of large systems
with a lot of peripherals like disks or network interfaces.
It prevents live-lockups that were observed, for example, when
messages about allocation failures were reported and a CPU handled
consoles instead of reclaiming the memory. It was hard to solve even
with rate limiting because it would need to take into account the
amount of messages and the speed of all consoles.
It is a must to have for real time. Otherwise, any printk() might
break latency guarantees.
The per-console kthreads allow to handle each console on its own
speed. Slow consoles do not longer slow down faster ones. And
printk() does not longer unpredictably slows down various code paths.
There are situations when the kthreads are either not available or
not reliable, for example, early boot, suspend, or panic. In these
situations, printk() uses the legacy mode and tries to handle
consoles immediately.
- Add documentation for the printk index.
* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk, tracing: fix console tracepoint
printk: remove @console_locked
printk: extend console_lock for per-console locking
printk: add kthread console printers
printk: add functions to prefer direct printing
printk: add pr_flush()
printk: move buffer definitions into console_emit_next_record() caller
printk: refactor and rework printing logic
printk: add con_printk() macro for console details
printk: call boot_delay_msec() in printk_delay()
printk: get caller_id/timestamp after migration disable
printk: wake waiters for safe and NMI contexts
printk: wake up all waiters
printk: add missing memory barrier to wake_up_klogd()
printk: cpu sync always disable interrupts
printk: rename cpulock functions
printk/index: Printk index feature documentation
MAINTAINERS: Add printk indexing maintainers on mention of printk_index
Linus Torvalds [Wed, 25 May 2022 17:24:04 +0000 (10:24 -0700)]
Merge tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Conversion of slub_debug stack traces to stackdepot, allowing more
useful debugfs-based inspection for e.g. memory leak debugging.
Allocation and free debugfs info now includes full traces and is
sorted by the unique trace frequency.
The stackdepot conversion was already attempted last year but
reverted by ae14c63a9f20. The memory overhead (while not actually
enabled on boot) has been meanwhile solved by making the large
stackdepot allocation dynamic. The xfstest issues haven't been
reproduced on current kernel locally nor in -next, so the slab cache
layout changes that originally made that bug manifest were probably
not the root cause.
- Refactoring of dma-kmalloc caches creation.
- Trivial cleanups such as removal of unused parameters, fixes and
clarifications of comments.
- Hyeonggon Yoo joins as a reviewer.
* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
MAINTAINERS: add myself as reviewer for slab
mm/slub: remove unused kmem_cache_order_objects max
mm: slab: fix comment for __assume_kmalloc_alignment
mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
mm/slub: remove unneeded return value of slab_pad_check
mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
mm/slub: remove meaningless node check in ___slab_alloc()
mm/slub: remove duplicate flag in allocate_slab()
mm/slub: remove unused parameter in setup_object*()
mm/slab.c: fix comments
slab, documentation: add description of debugfs files for SLUB caches
mm/slub: sort debugfs output by frequency of stack traces
mm/slub: distinguish and print stack traces in debugfs files
mm/slub: use stackdepot to save stack trace in objects
mm/slub: move struct track init out of set_track()
lib/stackdepot: allow requesting early initialization dynamically
mm/slub, kunit: Make slub_kunit unaffected by user specified flags
mm/slab: remove some unused functions
Linus Torvalds [Wed, 25 May 2022 16:02:19 +0000 (09:02 -0700)]
linux/types.h: reinstate "__bitwise__" macro for user space use
Commit c724c866bb70 ("linux/types.h: remove unnecessary __bitwise__")
was right that there are no users of __bitwise__ in the kernel, but it
turns out there are user space users of it that do expect it.
It is, after all, in the uapi directory, so user space usage is to be
expected.
Instead of reverting the commit completely, let's just clarify the
situation so that it doesn't happen again, and have some in-code
explanations for why that "__bitwise__" still exists.
Sean Young [Wed, 25 May 2022 13:08:30 +0000 (14:08 +0100)]
media: lirc: revert removal of unused feature flags
Commit b2a90f4fcb14 ("media: lirc: remove unused lirc features") removed
feature flags which were never implemented, but they are still used by
the lirc daemon went built from source.
Reinstate these symbols in order not to break the lirc build.
Since commit ba420afab565 ("drm/vkms: Bugfix racing hrtimer vblank
handle") the work is scheduled at vkms_vblank_simulate() and since
commit 5ef8100a3919 ("drm/vkms: flush crc workers earlier in commit
flow") the work is flushed at vkms_atomic_commit_tail(). Update function
commment to reflect that.
projects / people / ms / linux.git / log
