Link: https://lore.kernel.org/all/20220523123720.1656611-1-mkl@pengutronix.de Fixes: e8f0c23a2415 ("can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support.") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: Ondrej Ille <ondrej.ille@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yonghong Song [Mon, 23 May 2022 15:20:44 +0000 (08:20 -0700)]
selftests/bpf: fix btf_dump/btf_dump due to recent clang change
Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.
$ cat t.c
typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
struct t {
int a;
fn_ptr_arr2_t l;
};
int foo(struct t *arg) {
return arg->a;
}
To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.
The handling of connection failures shall be handled by the request
completion callback as already done by hci_cs_le_create_conn, also make
sure to use hci_conn_failed instead of hci_le_conn_failed as the later
don't actually call hci_conn_del to cleanup.
Link: https://github.com/bluez/bluez/issues/340 Fixes: 8e8b92ee60de5 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Linus Torvalds [Mon, 23 May 2022 19:51:04 +0000 (12:51 -0700)]
Merge tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring 'more data in socket' support from Jens Axboe:
"To be able to fully utilize the 'poll first' support in the core
io_uring branch, it's advantageous knowing if the socket was empty
after a receive. This adds support for that"
* tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: return hint on whether more data is available after receive
tcp: pass back data left in socket after receive
The previous commit was reverted since it lead to a race that
caused the hrtimer to not be started at all. The check for
hrtimer_active() in msg_submit() will return true if the
callback function txdone_hrtimer() is currently running. This
function could return HRTIMER_NORESTART and then the timer
will not be restarted, and also msg_submit() will not start
the timer. This will lead to a message actually being submitted
but no timer will start to check for its compleation.
The original fix that added checking hrtimer_active() was added to
avoid a warning with hrtimer_forward. Looking in the kernel
another solution to avoid this warning is to check hrtimer_is_queued()
before calling hrtimer_forward_now() instead. This however requires a
lock so the timer is not started by msg_submit() inbetween this check
and the hrtimer_forward() call.
Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback") Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Linus Torvalds [Mon, 23 May 2022 19:42:33 +0000 (12:42 -0700)]
Merge tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring socket() support from Jens Axboe:
"This adds support for socket(2) for io_uring. This is handy when using
direct / registered file descriptors with io_uring.
Outside of those two patches, a small series from Dylan on top that
improves the tracing by providing a text representation of the opcode
rather than needing to decode this by reading the header file every
time.
That sits in this branch as it was the last opcode added (until it
wasn't...)"
* tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: use the text representation of ops in trace
io_uring: rename op -> opcode
io_uring: add io_uring_get_opcode
io_uring: add type to op enum
io_uring: add socket(2) support
net: add __sys_socket_file()
Linus Torvalds [Mon, 23 May 2022 19:30:30 +0000 (12:30 -0700)]
Merge tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring xattr support from Jens Axboe:
"Support for the xattr variants"
* tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block:
io_uring: cleanup error-handling around io_req_complete
io_uring: fix trace for reduced sqe padding
io_uring: add fgetxattr and getxattr support
io_uring: add fsetxattr and setxattr support
fs: split off do_getxattr from getxattr
fs: split off setxattr_copy and do_setxattr function from setxattr
Linus Torvalds [Mon, 23 May 2022 19:22:49 +0000 (12:22 -0700)]
Merge tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Here are the main io_uring changes for 5.19. This contains:
- Fixes for sparse type warnings (Christoph, Vasily)
- Support for multi-shot accept (Hao)
- Support for io_uring managed fixed files, rather than always
needing the applicationt o manage the indices (me)
- Fix for a spurious poll wakeup (Dylan)
- CQE overflow fixes (Dylan)
- Support more types of cancelations (me)
- Support for co-operative task_work signaling, rather than always
forcing an IPI (me)
- Support for doing poll first when appropriate, rather than always
attempting a transfer first (me)
- Provided buffer cleanups and support for mapped buffers (me)
- Improve how io_uring handles inflight SCM files (Pavel)
- Speedups for registered files (Pavel, me)
- Organize the completion data in a struct in io_kiocb rather than
keep it in separate spots (Pavel)
- task_work improvements (Pavel)
- Cleanup and optimize the submission path, in general and for
handling links (Pavel)
- Speedups for registered resource handling (Pavel)
- Support sparse buffers and file maps (Pavel, me)
- Various fixes and cleanups (Almog, Pavel, me)"
* tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block: (111 commits)
io_uring: fix incorrect __kernel_rwf_t cast
io_uring: disallow mixed provided buffer group registrations
io_uring: initialize io_buffer_list head when shared ring is unregistered
io_uring: add fully sparse buffer registration
io_uring: use rcu_dereference in io_close
io_uring: consistently use the EPOLL* defines
io_uring: make apoll_events a __poll_t
io_uring: drop a spurious inline on a forward declaration
io_uring: don't use ERR_PTR for user pointers
io_uring: use a rwf_t for io_rw.flags
io_uring: add support for ring mapped supplied buffers
io_uring: add io_pin_pages() helper
io_uring: add buffer selection support to IORING_OP_NOP
io_uring: fix locking state for empty buffer group
io_uring: implement multishot mode for accept
io_uring: let fast poll support multishot
io_uring: add REQ_F_APOLL_MULTISHOT for requests
io_uring: add IORING_ACCEPT_MULTISHOT for accept
io_uring: only wake when the correct events are set
io_uring: avoid io-wq -EAGAIN looping for !IOPOLL
...
Julian Schroeder [Mon, 23 May 2022 18:52:26 +0000 (18:52 +0000)]
nfsd: destroy percpu stats counters after reply cache shutdown
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes: e567b98ce9a4b (“nfsd: protect concurrent access to nfsd stats counters”) Signed-off-by: Julian Schroeder <jumaco@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
Linus Torvalds [Mon, 23 May 2022 18:43:44 +0000 (11:43 -0700)]
Merge tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM update from Paul McKenney:
"This updates the klitmus7 compatibility table to indicate that
herdtools7 7.56.1 or better is required for Linux kernel v5.17 or
later"
* tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/README: Update klitmus7 compat table
Mark Menzynski [Mon, 23 May 2022 11:35:41 +0000 (13:35 +0200)]
drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()
Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.
This patch introduces another output poll clearing before fbcon
resources are destroyed.
BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
Linus Torvalds [Mon, 23 May 2022 18:33:25 +0000 (11:33 -0700)]
Merge tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc library updates from Paul McKenney:
"This adds a number of library functions and splits this library into
multiple files"
* tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
tools/nolibc/string: Implement `strdup()` and `strndup()`
tools/nolibc/string: Implement `strnlen()`
tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
tools/nolibc/types: Implement `offsetof()` and `container_of()` macro
tools/nolibc/sys: Implement `mmap()` and `munmap()`
tools/nolibc: i386: Implement syscall with 6 arguments
tools/nolibc: Remove .global _start from the entry point code
tools/nolibc: Replace `asm` with `__asm__`
tools/nolibc: x86-64: Update System V ABI document link
tools/nolibc/stdlib: only reference the external environ when inlined
tools/nolibc/string: do not use __builtin_strlen() at -O0
tools/nolibc: add the nolibc subdir to the common Makefile
tools/nolibc: add a makefile to install headers
tools/nolibc/types: add poll() and waitpid() flag definitions
tools/nolibc/sys: add syscall definition for getppid()
tools/nolibc/string: add strcmp() and strncmp()
tools/nolibc/stdio: add support for '%p' to vfprintf()
tools/nolibc/stdlib: add a simple getenv() implementation
tools/nolibc/stdio: make printf(%s) accept NULL
tools/nolibc/stdlib: implement abort()
...
* thermal-misc:
thermal: devfreq_cooling: use local ops instead of global ops
thermal: hisi_termal: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
Linus Torvalds [Mon, 23 May 2022 18:27:24 +0000 (11:27 -0700)]
Merge tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
Jens Axboe [Mon, 23 May 2022 18:18:55 +0000 (12:18 -0600)]
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.19/drivers
Pull MD updates from Song:
"- Remove uses of bdevname, by Christoph Hellwig;
- Bug fixes by Guoqing Jiang, and Xiao Ni."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
md: remove most calls to bdevname
md: protect md_unregister_thread from reentrancy
md: don't unregister sync_thread with reconfig_mutex held
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
* pm-domains:
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns()
PM: domains: Extend dev_pm_domain_detach() doc
Syed Saba kareem [Mon, 23 May 2022 11:29:53 +0000 (16:59 +0530)]
ASoC: SOF: amd: Fixed Build error
Add linux/module.h in acp-pci.c to solve the below dependency
All error/warnings (new ones prefixed by >>):
>> sound/soc/amd/acp/acp-pci.c:148:1: warning: data definition has no type or storage class
148 | MODULE_DEVICE_TABLE(pci, acp_pci_ids);
| ^~~~~~~~~~~~~~~~~~~
>> sound/soc/amd/acp/acp-pci.c:148:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]
...
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois):
* Add per_cpu efficiency_class to the CPPC driver.
* Make the CPPC driver Register EM based on efficiency class
information.
* Adjust _OSC for flexible address space in the ACPI platform
initialization code and always set CPPC _OSC bits if CPPC_LIB is
supported.
* Assume no transition latency if no PCCT in the CPPC driver.
* Add fast_switch and dvfs_possible_from_any_cpu support to the CPPC
driver.
* pm-cpufreq:
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
cpufreq: make interface functions and lock holding state clear
cpufreq: Abort show()/store() for half-initialized policies
cpufreq: Rearrange locking in cpufreq_remove_dev()
cpufreq: Split cpufreq_offline()
cpufreq: Reorganize checks in cpufreq_offline()
cpufreq: Clear real_cpus mask from remove_cpu_dev_symlink()
cpufreq: intel_pstate: Support Sapphire Rapids OOB mode
Revert "cpufreq: Fix possible race in cpufreq online error path"
cpufreq: CPPC: Register EM based on efficiency class information
cpufreq: CPPC: Add per_cpu efficiency_class
cpufreq: Avoid unnecessary frequency updates due to mismatch
cpufreq: Fix possible race in cpufreq online error path
cpufreq: intel_pstate: Handle no_turbo in frequency invariance
cpufreq: Prepare cleanup of powerpc's asm/prom.h
cpufreq: governor: Use kobject release() method to free dbs_data
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Pipe clocks
has been updated to use newer and simpler clk_regmap_phy_mux_ops. Drop
the regmap-mux-safe clock ops now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 21 May 2022 00:53:37 +0000 (03:53 +0300)]
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sc7280 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-3-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Sat, 21 May 2022 00:53:36 +0000 (03:53 +0300)]
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sm8450 driver to use regmap_mux_safe.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-2-dmitry.baryshkov@linaro.org
Marge Energy Model support updates and cpuidle updates for 5.19-rc1:
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
* pm-em:
PM: EM: Decrement policy counter
powercap: DTPM: Check for Energy Model type
thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling
Documentation: EM: Add artificial EM registration description
PM: EM: Remove old debugfs files and print all 'flags'
PM: EM: Change the order of arguments in the .active_power() callback
PM: EM: Use the new .get_cost() callback while registering EM
PM: EM: Add artificial EM flag
PM: EM: Add .get_cost() callback
* pm-cpuidle:
cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
cpuidle: psci: Fix regression leading to no genpd governor
intel_idle: Add AlderLake support
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
* pm-core:
PM: runtime: Avoid device usage count underflows
iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace
PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv
iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume()
* pm-sleep:
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
PM: runtime: Allow to call __pm_runtime_set_status() from atomic context
PM: hibernate: Don't mark comment as kernel-doc
x86/ACPI: Preserve ACPI-table override during hibernation
PM: hibernate: Fix some kernel-doc comments
PM: sleep: enable dynamic debug support within pm_pr_dbg()
PM: sleep: Narrow down -DDEBUG on kernel/power/ files
* powercap:
powercap: intel_rapl: remove redundant store to value after multiply
powercap: intel_rapl: add support for ALDERLAKE_N
powercap: RAPL: Add Power Limit4 support for RaptorLake
powercap: intel_rapl: add support for RaptorLake
Rob Herring [Thu, 19 May 2022 21:14:11 +0000 (16:14 -0500)]
dt-bindings: Fix properties without any type
Now that the schema tools can extract type information for all
properties (in order to decode dtb files), finding properties missing
any type definition is fairly trivial though not yet automated.
Fix the various property schemas which are missing a type. Most of these
tend to be device specific properties which don't have a vendor prefix.
A vendor prefix is how we normally ensure a type is defined.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/ Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org
Merge branches 'acpi-pm', 'acpi-pci', 'acpi-sysfs' and 'acpi-tables'
Merge power management, PCI and sysfs-related material and changes
related to handling ACPI tables for 5.19-rc1:
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
* acpi-pm:
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: PM: Unify debug messages in acpi_device_set_power()
ACPI: PM: Change pr_fmt() in device_pm.c
ACPI: PM: Convert debug message in acpi_device_get_power()
* acpi-pci:
ACPI: bus: Avoid non-ACPI device objects in walks over children
PCI: ACPI: PM: Power up devices in D3cold before scanning them
ACPI: PM: Introduce acpi_dev_power_up_children_with_adr()
ACPI: bus: Introduce acpi_dev_for_each_child()
* acpi-sysfs:
ACPI: sysfs: Fix BERT error region memory mapping
* acpi-tables:
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
Jason Gunthorpe [Thu, 19 May 2022 17:03:48 +0000 (14:03 -0300)]
vfio: Do not manipulate iommu dma_owner for fake iommu groups
Since asserting dma ownership now causes the group to have its DMA blocked
the iommu layer requires a working iommu. This means the dma_owner APIs
cannot be used on the fake groups that VFIO creates. Test for this and
avoid calling them.
Otherwise asserting dma ownership will fail for VFIO mdev devices as a
BLOCKING iommu_domain cannot be allocated due to the NULL iommu ops.
Fixes: 0286300e6045 ("iommu: iommu_group_claim_dma_owner() must always assign a domain") Reported-by: Eric Farman <farman@linux.ibm.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/0-v1-9cfc47edbcd4+13546-vfio_dma_owner_fix_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* acpica: (21 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
ACPICA: executer/exsystem: Inform users about ACPI spec violation
ACPICA: Add support for ARM Performance Monitoring Unit Table.
ACPICA: executer/exsystem: Add units to time variable names
ACPICA: Headers: Replace zero-length array with flexible-array member
ACPICA: Removed some tabs and // comments
ACPICA: Update copyright notices to the year 2022
ACPICA: Clean up double word in comment
ACPICA: Add new ACPI 6.4 semantics for LoadTable() operator
ACPICA: Add new ACPI 6.4 semantics to the Load() operator
ACPICA: iASL: NHLT: Rename linux specific strucures to device_info
ACPICA: iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor
ACPICA: iASL: NHLT: Treat Terminator as specific_config
ACPICA: Add the subtable CFMWS to the CEDT table
...
This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.
This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.
Masahiro Yamada [Fri, 13 May 2022 11:39:21 +0000 (20:39 +0900)]
modpost: extract symbol versions from *.cmd files
Currently, CONFIG_MODVERSIONS needs extra link to embed the symbol
versions into ELF objects. Then, modpost extracts the version CRCs
from them.
The following figures show how it currently works, and how I am trying
to change it.
Current implementation
======================
|----------|
embed CRC -------------------------->| final |
$(CC) $(LD) / |---------| | link for |
-----> *.o -------> *.o -->| modpost | | vmlinux |
/ / | |-- *.mod.c -->| or |
/ genksyms / |---------| | module |
*.c ------> *.symversions |----------|
Genksyms outputs the calculated CRCs in the form of linker script
(*.symversions), which is used by $(LD) to update the object.
If CONFIG_LTO_CLANG=y, the build process is much more complex. Embedding
the CRCs is postponed until the LLVM bitcode is converted into ELF,
creating another intermediate *.prelink.o.
However, this complexity is unneeded. There is no reason why we must
embed version CRCs in objects so early.
There is final link stage for vmlinux (scripts/link-vmlinux.sh) and
modules (scripts/Makefile.modfinal). We can link CRCs at the very last
moment.
New implementation
==================
|----------|
--------------------------------------->| final |
$(CC) / |---------| | link for |
-----> *.o ---->| | | vmlinux |
/ | modpost |--- .vmlinux.export.c -->| or |
/ genksyms | |--- *.mod.c ------------>| module |
*.c ------> *.cmd -->|---------| |----------|
Pass the symbol versions to modpost as separate text data, which are
available in *.cmd files.
This commit changes modpost to extract CRCs from *.cmd files instead of
from ELF objects.
Masahiro Yamada [Wed, 11 May 2022 16:45:04 +0000 (01:45 +0900)]
modpost: add sym_find_with_module() helper
find_symbol() returns the first symbol found in the hash table. This
table is global, so it may return a symbol from an unexpected module.
There is a case where we want to search for a symbol with a given name
in a specified module.
Add sym_find_with_module(), which receives the module pointer as the
second argument. It is equivalent to find_module() if NULL is passed
as the module pointer.
Ahmad Fatoum [Fri, 13 May 2022 14:57:03 +0000 (16:57 +0200)]
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
The Cryptographic Acceleration and Assurance Module (CAAM) is an IP core
built into many newer i.MX and QorIQ SoCs by NXP.
The CAAM does crypto acceleration, hardware number generation and
has a blob mechanism for encapsulation/decapsulation of sensitive material.
This blob mechanism depends on a device specific random 256-bit One Time
Programmable Master Key that is fused in each SoC at manufacturing
time. This key is unreadable and can only be used by the CAAM for AES
encryption/decryption of user data.
This makes it a suitable backend (source) for kernel trusted keys.
Previous commits generalized trusted keys to support multiple backends
and added an API to access the CAAM blob mechanism. Based on these,
provide the necessary glue to use the CAAM for trusted keys.
Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Ahmad Fatoum [Fri, 13 May 2022 14:57:02 +0000 (16:57 +0200)]
crypto: caam - add in-kernel interface for blob generator
The NXP Cryptographic Acceleration and Assurance Module (CAAM)
can be used to protect user-defined data across system reboot:
- When the system is fused and boots into secure state, the master
key is a unique never-disclosed device-specific key
- random key is encrypted by key derived from master key
- data is encrypted using the random key
- encrypted data and its encrypted random key are stored alongside
- This blob can now be safely stored in non-volatile memory
On next power-on:
- blob is loaded into CAAM
- CAAM writes decrypted data either into memory or key register
Add functions to realize encrypting and decrypting into memory alongside
the CAAM driver.
They will be used in a later commit as a source for the trusted key
seal/unseal mechanism.
Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Depending on SoC variant, a CAAM may be available, but with some futures
fused out. The LS1028A (non-E) SoC is one such SoC and while it
indicates BLOB support, BLOB operations will ultimately fail, because
there is no AES support. Add a new blob_present member to reflect
whether both BLOB support and the AES support it depends on is
available.
These will be used in a follow-up commit to allow blob driver
initialization to error out on SoCs without the necessary hardware
support instead of failing at runtime with a cryptic
Co-developed-by: Michael Walle <michael@walle.cc> Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Ahmad Fatoum [Fri, 13 May 2022 14:57:00 +0000 (16:57 +0200)]
KEYS: trusted: allow use of kernel RNG for key material
The two existing trusted key sources don't make use of the kernel RNG,
but instead let the hardware doing the sealing/unsealing also
generate the random key material. However, both users and future
backends may want to place less trust into the quality of the trust
source's random number generator and instead reuse the kernel entropy
pool, which can be seeded from multiple entropy sources.
Make this possible by adding a new trusted.rng parameter,
that will force use of the kernel RNG. In its absence, it's up
to the trust source to decide, which random numbers to use,
maintaining the existing behavior.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: David Gstir <david@sigma-star.at> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Ahmad Fatoum [Fri, 13 May 2022 14:56:59 +0000 (16:56 +0200)]
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
With recent rework, trusted keys are no longer limited to TPM as trust
source. The Kconfig symbol is unchanged however leading to a few issues:
- TCG_TPM is required, even if only TEE is to be used
- Enabling TCG_TPM, but excluding it from available trusted sources
is not possible
- TEE=m && TRUSTED_KEYS=y will lead to TEE support being silently
dropped, which is not the best user experience
Remedy these issues by introducing two new boolean Kconfig symbols:
TRUSTED_KEYS_TPM and TRUSTED_KEYS_TEE with the appropriate
dependencies.
Any new code depending on the TPM trusted key backend in particular
or symbols exported by it will now need to explicitly state that it
depends on TRUSTED_KEYS && TRUSTED_KEYS_TPM
The latter to ensure the dependency is built and the former to ensure
it's reachable for module builds. There are no such users yet.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com> Tested-by: Andreas Rammhold <andreas@rammhold.de> Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E) Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm: Add field upgrade mode support for Infineon TPM2 modules
TPM2_GetCapability with a capability that has the property type value
of TPM_PT_TOTAL_COMMANDS returns a zero length list, when an Infineon
TPM2 is in field upgrade mode.
Since an Infineon TPM2.0 in field upgrade mode returns RC_SUCCESS on
TPM2_Startup, the field upgrade mode has to be detected by
TPM2_GetCapability.
Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Under certain conditions uninitialized memory will be accessed.
As described by TCG Trusted Platform Module Library Specification,
rev. 1.59 (Part 3: Commands), if a TPM2_GetCapability is received,
requesting a capability, the TPM in field upgrade mode may return a
zero length list.
Check the property count in tpm2_get_tpm_pt().
Fixes: 2ab3241161b3 ("tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf") Cc: stable@vger.kernel.org Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As tpm_cr50_i2c_remove() emits an error message already and the
additional error message by the i2c core doesn't add any useful
information, change the return value to zero to suppress this error
message.
Note that if i2c_clientdata is NULL, there is something really fishy.
Assuming no memory corruption happened (then all bets are lost anyhow),
tpm_cr50_i2c_remove() is only called after tpm_cr50_i2c_probe() returned
successfully. So there was a tpm chip registered before and after
tpm_cr50_i2c_remove() its privdata is freed but the associated character
device isn't removed. If after that happened userspace accesses the
character device it's likely that the freed memory is accessed. For that
reason the warning message is made a bit more frightening.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Johannes Holland [Mon, 21 Mar 2022 09:09:24 +0000 (10:09 +0100)]
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
Only tpm_tis and tpm_tis_synquacer have a dedicated way to access
multiple bytes at once, every other driver will just fall back to
read_bytes/write_bytes. Therefore, remove the read16/read32/write32
calls and move their logic to read_bytes/write_bytes.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Johannes Holland <johannes.holland@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Xiu Jianfeng [Fri, 18 Mar 2022 06:02:01 +0000 (14:02 +0800)]
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
Currently it returns zero when CRQ response timed out, it should return
an error code instead.
Fixes: d8d74ea3c002 ("tpm: ibmvtpm: Wait for buffer to be set before proceeding") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
certs: Allow root user to append signed hashes to the blacklist keyring
Add a kernel option SYSTEM_BLACKLIST_AUTH_UPDATE to enable the root user
to dynamically add new keys to the blacklist keyring. This enables to
invalidate new certificates, either from being loaded in a keyring, or
from being trusted in a PKCS#7 certificate chain. This also enables to
add new file hashes to be denied by the integrity infrastructure.
Being able to untrust a certificate which could have normaly been
trusted is a sensitive operation. This is why adding new hashes to the
blacklist keyring is only allowed when these hashes are signed and
vouched by the builtin trusted keyring. A blacklist hash is stored as a
key description. The PKCS#7 signature of this description must be
provided as the key payload.
Marking a certificate as untrusted should be enforced while the system
is running. It is then forbiden to remove such blacklist keys.
Update blacklist keyring, blacklist key and revoked certificate access
rights:
* allows the root user to search for a specific blacklisted hash, which
make sense because the descriptions are already viewable;
* forbids key update (blacklist and asymmetric ones);
* restricts kernel rights on the blacklist keyring to align with the
root user rights.
See help in tools/certs/print-cert-tbs-hash.sh .
Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20210712170313.884724-6-mic@digikod.net Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
certs: Check that builtin blacklist hashes are valid
Add and use a check-blacklist-hashes.awk script to make sure that the
builtin blacklist hashes set with CONFIG_SYSTEM_BLACKLIST_HASH_LIST will
effectively be taken into account as blacklisted hashes. This is useful
to debug invalid hash formats, and it make sure that previous hashes
which could have been loaded in the kernel, but silently ignored, are
now noticed and deal with by the user at kernel build time.
This also prevent stricter blacklist key description checking (provided
by following commits) to failed for builtin hashes.
Update CONFIG_SYSTEM_BLACKLIST_HASH_LIST help to explain the content of
a hash string and how to generate certificate ones.
Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20210712170313.884724-3-mic@digikod.net Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
certs: Make blacklist_vet_description() more strict
Before exposing this new key type to user space, make sure that only
meaningful blacklisted hashes are accepted. This is also checked for
builtin blacklisted hashes, but a following commit make sure that the
user will notice (at built time) and will fix the configuration if it
already included errors.
Check that a blacklist key description starts with a valid prefix and
then a valid hexadecimal string.
Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20210712170313.884724-4-mic@digikod.net Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Factor out the blacklist hash creation with the get_raw_hash() helper.
This also centralize the "tbs" and "bin" prefixes and make them private,
which help to manage them consistently.
Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20210712170313.884724-5-mic@digikod.net Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a new helper print-cert-tbs-hash.sh to generate a TBSCertificate
hash from a given certificate. This is useful to generate a blacklist
key description used to forbid loading a specific certificate in a
keyring, or to invalidate a certificate provided by a PKCS#7 file.
This kind of hash formatting is required to populate the file pointed
out by CONFIG_SYSTEM_BLACKLIST_HASH_LIST, but only the kernel code was
available to understand how to effectively create such hash.
Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eric Snowberg <eric.snowberg@oracle.com> Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20210712170313.884724-2-mic@digikod.net Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This can be reproduce by concurrent operations:
1. fsopen(nfsd)/fsconfig
2. insmod/rmmod nfsd
Since the nfsd file system is registered before than nfsd_net allocated,
the caller may get the file_system_type and use the nfsd_net before it
allocated, then null-ptr-deref occurred.
So init_nfsd() should call register_filesystem() last.
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Fri, 29 Apr 2022 14:06:21 +0000 (10:06 -0400)]
SUNRPC: Use RMW bitops in single-threaded hot paths
I noticed CPU pipeline stalls while using perf.
Once an svc thread is scheduled and executing an RPC, no other
processes will touch svc_rqst::rq_flags. Thus bus-locked atomics are
not needed outside the svc thread scheduler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Wed, 30 Mar 2022 14:30:54 +0000 (10:30 -0400)]
NFSD: Instantiate a struct file when creating a regular NFSv4 file
There have been reports of races that cause NFSv4 OPEN(CREATE) to
return an error even though the requested file was created. NFSv4
does not provide a status code for this case.
To mitigate some of these problems, reorganize the NFSv4
OPEN(CREATE) logic to allocate resources before the file is actually
created, and open the new file while the parent directory is still
locked.
Two new APIs are added:
+ Add an API that works like nfsd_file_acquire() but does not open
the underlying file. The OPEN(CREATE) path can use this API when it
already has an open file.
+ Add an API that is kin to dentry_open(). NFSD needs to create a
file and grab an open "struct file *" atomically. The
alloc_empty_file() has to be done before the inode create. If it
fails (for example, because the NFS server has exceeded its
max_files limit), we avoid creating the file and can still return
an error to the NFS client.
The Wolfson Microelectronics Arizona audio can be connected via SPI bus
(e.g. WM5110 on Exynos5433 TM2 board), so allow SPI peripheral
properties.
Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220504084304.46173-1-krzysztof.kozlowski@linaro.org
mfd: rt4831: Improve error reporting for problems during .remove()
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't make
a difference. The device goes away anyhow and the devm cleanups are
called.
So instead of triggering the generic i2c error message, emit a more helpful
message if a problem occurs and return 0 to suppress the generic message.
This patch is a preparation for making i2c remove callbacks return void.
Takashi Iwai [Mon, 23 May 2022 14:03:04 +0000 (16:03 +0200)]
Merge tag 'asoc-v5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.19
This is quite a big update, partly due to the addition of some larger
drivers (more of which is to follow since at least the AVS driver is
still a work in progress) and partly due to Charles' work sorting out
our handling of endianness. As has been the case recently it's much
more about drivers than the core.
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs.
- Initial stages of Intel AVS driver merge.
- Introduction of v4 IPC mechanism for SOF.
- TDM mode support for AK4613.
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Shengjiu Wang [Mon, 23 May 2022 05:44:21 +0000 (13:44 +0800)]
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
There are multiple xDR and xFR registers, the index is
from 0 to 7. FSL_SAI_xDR and FSL_SAI_xFR is abandoned,
replace them with FSL_SAI_xDR0 and FSL_SAI_xFR0.
ASoC: soc-pcm: fix BE transition for TRIGGER_START
A obvious editing mistake caught with a cppcheck warning
sound/soc/soc-pcm.c:2132:8: style: Variable 'ret' is reassigned a
value before the old one has been used. [redundantAssignment]
ret = soc_pcm_trigger(be_substream, cmd);
^
sound/soc/soc-pcm.c:2126:9: note: ret is assigned
ret = soc_pcm_trigger(be_substream,
^
sound/soc/soc-pcm.c:2129:9: note: ret is assigned
ret = soc_pcm_trigger(be_substream,
^
Fixes: 374b50e234a3e ('ASoC: soc-pcm: improve BE transition for TRIGGER_START') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220520210615.607229-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Yang Yingliang [Tue, 26 Apr 2022 03:08:57 +0000 (11:08 +0800)]
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Based on a bspec update the DMC firmware's flip queue handling events
need to be disabled before enabling DC5/6. i915 doesn't use the flip
queue feature atm, so disable it already after loading the firmware.
This removes some overhead of the event handler which runs at a 1 kHz
frequency.
Bspec: 49193, 72486, 72487
v2:
- Fix the DMC pipe A register offsets for GEN12.
- Disable the events on DG2 only on pipe A..D .
v3: (Lucas)
- Add TODO: to clarify the disabling sequence on all D13+
- s/intel_dmc_has_fw_payload/has_dmc_id_fw/
- s/simple_flipq/flipq/
- s/_GEN12,_GEN13/TGL_,ADLP_/
- s/MAINDMC/DMC/
v4:
- Only disable flip queues on TGL/DG2, as on other platforms the
corresponding event handlers don't exist.
Robin Murphy [Fri, 20 May 2022 17:10:13 +0000 (18:10 +0100)]
dma-direct: don't over-decrypt memory
The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.
Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...
Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David Rientjes <rientjes@google.com>
Adrian Hunter [Tue, 17 May 2022 13:10:11 +0000 (16:10 +0300)]
perf intel-pt: Add guest_code support
A common case for KVM test programs is that the test program acts as the
hypervisor, creating, running and destroying the virtual machine, and
providing the guest object code from its own object code. In this case,
the VM is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same virtual
addresses.
To support that, a new option "--guest-code" has been added in
previous patches.
In this patch, add support also to Intel PT.
In particular, ensure guest_code thread is set up before attempting to
walk object code or synthesize samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 17 May 2022 13:10:10 +0000 (16:10 +0300)]
perf kvm report: Add guest_code support
Add an option to indicate that guest code can be found in the hypervisor
process.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 17 May 2022 13:10:09 +0000 (16:10 +0300)]
perf script: Add guest_code support
Add an option to indicate that guest code can be found in the hypervisor
process.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 17 May 2022 13:10:08 +0000 (16:10 +0300)]
perf tools: Add guest_code support
A common case for KVM test programs is that the test program acts as the
hypervisor, creating, running and destroying the virtual machine, and
providing the guest object code from its own object code. In this case,
the VM is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same virtual
addresses.
Normally to resolve addresses, MMAP events are needed to map addresses
back to the object code and debug symbols for that object code.
Currently, there is no way to get such mapping information from guests
but, in the scenario described above, the guest has the same mappings
as the hypervisor, so support for that scenario can be achieved.
To support that, copy the host thread's maps to the guest thread's maps.
Note, we do not discover the guest until we encounter a guest event,
which works well because it is not until then that we know that the host
thread's maps have been set up.
Typically the main function for the guest object code is called
"guest_code", hence the name chosen for this feature. Note, that is just a
convention, the function could be named anything, and the tools do not
care.
This is primarily aimed at supporting Intel PT, or similar, where trace
data can be recorded for a guest. Refer to the final patch in this series
"perf intel-pt: Add guest_code support" for an example.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 17 May 2022 13:10:07 +0000 (16:10 +0300)]
perf tools: Factor out thread__set_guest_comm()
Factor out thread__set_guest_comm() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 17 May 2022 13:10:06 +0000 (16:10 +0300)]
perf tools: Add machine to machines back pointer
When dealing with guest machines, it can be necessary to get a reference
to the host machine. Add a machines pointer to struct machine to make that
possible.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Tue, 17 May 2022 13:58:05 +0000 (14:58 +0100)]
perf vendors events arm64: Update Cortex A57/A72
Categorise and add missing PMU events for Cortex-A57/A72, based on:
https://github.com/ARM-software/data/blob/master/pmu/cortex-a57.json
https://github.com/ARM-software/data/blob/master/pmu/cortex-a72.json
These contain the same events, and are based on the Arm Technical
Reference Manuals for Cortex-A57 and Cortex-A72.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220517135805.313184-2-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:55 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Neoverse E1
Add PMU events for Arm Neoverse E1
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/neoverse-e1.json
which is based on PMU event descriptions from the Arm Neoverse E1 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-14-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:54 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Cortex-X2
Add PMU events for Arm Cortex-X2
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/cortex-x2.json
which is based on PMU event descriptions from the Arm Cortex-X2 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-13-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:53 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Cortex-X1
Add PMU events for Arm Cortex-X1
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/cortex-x1.json
which is based on PMU event descriptions from the Arm Cortex-X1 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-12-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:52 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Cortex-A710
Add PMU events for Arm Cortex-A710
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/cortex-a710.json
which is based on PMU event descriptions from the Arm Cortex-A710 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-11-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:51 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Cortex-A78
Add PMU events for Arm Cortex-A78
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/cortex-a78.json
which is based on PMU event descriptions from the Arm Cortex-A78 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-10-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nick Forrington [Fri, 20 May 2022 18:14:50 +0000 (19:14 +0100)]
perf vendors events arm64: Arm Cortex-A77
Add PMU events for Arm Cortex-A77
Update mapfile.csv
Event data based on:
https://github.com/ARM-software/data/tree/master/pmu/cortex-a77.json
which is based on PMU event descriptions from the Arm Cortex-A77 Technical
Reference Manual.
Mapping data (for mapfile.csv) based on:
https://github.com/ARM-software/data/blob/master/cpus.json
which is based on Main ID Register (MIDR) information found in the Arm
Technical Reference Manuals for individual CPUs.
Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Nick Forrington <nick.forrington@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220520181455.340344-9-nick.forrington@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / people / ms / linux.git / log
