The thermal subsystem registers a hwmon driver without providing
chip or sysfs group information. This is for legacy reasons and
would be difficult to change. At the same time, we want to enforce
that chip information is provided when registering a hwmon device
using hwmon_device_register_with_info(). To enable this, introduce
a special API for use only by the thermal subsystem.
Acked-by: Rafael J . Wysocki <rafael@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver provides an i2c I/O mechanism for the core nct6775 driver,
as might be used by a BMC. Because the Super I/O chip is shared with
the host CPU in such a scenario (and the host should ultimately be in
control of it), the i2c driver is strictly read-only to avoid
interfering with any usage by the host (aside from the bank-select
register, which seems to be replicated for the i2c interface).
Denis Pauk [Sat, 7 May 2022 07:29:33 +0000 (10:29 +0300)]
hwmon: (nct6775) add ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI II
Boards such as
* PRO H410T
* PRIME H410M-R
* ROG STRIX X570-E GAMING WIFI II
have got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.
This commit adds such boards to the WMI monitoring list.
Some include directives are no longer necessary due to previous driver
changes. Remove them now to further improve driver code clarity.
Mutex usage has ceased since commit 719af4f1a40b ("hwmon: (lm83) Use
regmap").
Ever since commit a0ac840d99fa ("hwmon: (lm83) Convert to use
devm_hwmon_device_register_with_groups") functions sysfs_create_group
and sysfs_remove_group are no longer used by the driver.
Chris Packham [Wed, 23 Mar 2022 03:40:56 +0000 (16:40 +1300)]
hwmon: (adt7475) Use enum chips when loading attenuator settings
Make use of enum chips and use a switch statement in load_attenuators()
so that the compiler can tell us if we've failed to cater for a
supported chip.
Chris Packham [Wed, 23 Mar 2022 03:40:55 +0000 (16:40 +1300)]
hwmon: (adt7475) Add support for pin configuration
The adt7473, adt7475, adt7476 and adt7490 have pins that can be used for
different functions. On the adt7473 and adt7475 this is pins 5 and 9.
On the adt7476 and adt7490 this is pins 10 and 14.
The first pin can either be PWM2(default) or SMBALERT#. The second pin
can be TACH4(default), THERM#, SMBALERT# or GPIO.
The adt7475 driver has always been able to detect the configuration if
it had been done by an earlier boot stage. Add support for configuring
the pins based on the hardware description in the device tree.
The adt7473, adt7475, adt7476 and adt7490 have pins that can be used for
different functions. Add bindings so that it is possible to describe
what pin functions are intended by the hardware design.
Michael Walle [Fri, 1 Apr 2022 21:40:32 +0000 (23:40 +0200)]
hwmon: add driver for the Microchip LAN966x SoC
Add support for the temperatur sensor and the fan controller on the
Microchip LAN966x SoC. Apparently, an Analog Bits PVT sensor is used
which can measure temperature and process voltages. But only a forumlae
for the temperature sensor is known. Additionally, the SoC support a fan
tacho input as well as a PWM signal to control the fan.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220401214032.3738095-5-michael@walle.cc
[groeck: Added missing reference in Documentation/hwmon/index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Michael Walle [Fri, 1 Apr 2022 21:40:29 +0000 (23:40 +0200)]
lib: add generic polynomial calculation
Some temperature and voltage sensors use a polynomial to convert between
raw data points and actual temperature or voltage. The polynomial is
usually the result of a curve fitting of the diode characteristic.
The BT1 PVT hwmon driver already uses such a polynonmial calculation
which is rather generic. Move it to lib/ so other drivers can reuse it.
Linus Torvalds [Sun, 22 May 2022 18:04:38 +0000 (08:04 -1000)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes for 5.18. Nothing spectacular but worth
fixing"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
ath11k: Init hw_params before setting up AHB resources
As part of adding the support of WCN6750 to ath11k, bus_params
were moved to hw_params and this regressed the initialization
of WCN6750. By the time AHB resources are setup for WCN6750,
hw_params will not be initialized and therefore initialization
for WCN6750 will fail. This is applicable only for WCN6750,
no other device is impacted.
Fix this by moving the initialization of hw_params before
setting up AHB resources.
Fixes: 652f69ed9c1b ("ath11k: Add support for SAR") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220517004844.2412660-1-quic_bqiang@quicinc.com
Sergey Ryazanov [Mon, 16 May 2022 10:26:00 +0000 (13:26 +0300)]
ath10k: add encapsulation offloading support
Frame encapsulation from Ethernet into the IEEE 802.11 frame format
takes a considerable host CPU time on the xmit path. The firmware is
able to do this operation for us, so enable encapsulation offloading for
AP and Sta interface types to improve overall system performance.
The driver is almost ready for encapsulation offloading support. There
are only a few places where the driver assumes the frame format is IEEE
802.11 that need to be fixed.
Encapsulation offloading is currently disabled by default and the driver
utilizes mac80211 encapsulation support. To activate offloading, the
frame_mode=2 parameter should be passed during module loading.
On a QCA9563+QCA9888-based access point in bridged mode, encapsulation
offloading increases TCP 16-streams DL throughput from 365 to 396 mbps
(+8%) and UDP DL throughput from 436 to 483 mbps (+11%).
Tested-on: QCA9888 hw2.0 PCI 10.4-3.9.0.2-00131
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Tested-by: Oldřich Jedlička <oldium.pro@gmail.com> # TP-Link Archer C7 v4 & v5 (QCA9563 + QCA9880) Tested-by: Edward Matijevic <motolav@gmail.com> # TP-Link Archer C2600 (IPQ8064 + QCA9980 10.4.1.00030-1) Tested-by: Edward Matijevic <motolav@gmail.com> # QCA9377 PCI in Sta mode Tested-by: Zhijun You <hujy652@gmail.com> # NETGEAR R7800 (QCA9984 10.4-3.9.0.2-00159) Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220516032519.29831-5-ryazanov.s.a@gmail.com
Sergey Ryazanov [Mon, 16 May 2022 10:26:00 +0000 (13:26 +0300)]
ath10k: turn rawmode into frame_mode
Turn boolean rawmode module param into integer frame_mode param that
contains value from ath10k_hw_txrx_mode enum. As earlier the default
param value is non-RAW (native Wi-Fi) encapsulation. The param name
is selected to be consistent with the similar ath11k param.
This is a preparation step for upcoming encapsulation offloading
support.
Sergey Ryazanov [Mon, 16 May 2022 10:26:00 +0000 (13:26 +0300)]
ath10k: htt_tx: do not interpret Eth frames as WiFi
The xmit path for the Ethernet encapsulated frames become more or less
usable since d740d8fd2439 ("ath10k: unify tx mode and dispatch"). This
change reorganize the xmit path in a manageable way to properly support
various tx modes, but misses that the Ethernet encapsulated frame is a
special case. We do not have an IEEE 802.11 header at the begining of
them. But the HTT Tx handler still interprets first bytes of each frame
as an IEEE 802.11 Frame Control field.
Than this code was copied by e62ee5c381c5 ("ath10k: Add support for
htt_data_tx_desc_64 descriptor") and a2097d6444c3 ("ath10k: htt: High
latency TX support") to another handlers. In fact the issue in the high
latency (HL) handler was introduced by 83ac260151e7 ("ath10k: add mic
bytes for pmf management packet").
Ethernet encapsulated frame tx mode stay unused until 75d85fd9993c
("ath10k: introduce basic tdls functionality") started using it for TDLS
frames to avoid key selection issue in some firmwares.
Trying to interpret the begining of an Ethernet encapsulated frame as an
IEEE 802.11 header was not hurt us noticeably since we need to meet two
conditions: (1) xmit should be performed towards a TDLS peer, and (2)
the TDLS peer should have a specific OUI part of its MAC address. Looks
like that the rareness in TDLS communications of OUIs that can be
interpreted as an 802.11 management frame saves users from facing this
issue earlier.
Improve Ethernet tx mode support in the HTT Tx handler by avoiding
interpreting its first bytes as an IEEE 802.11 header. While at it, make
the ieee80211_hdr variable local to the code block that is guarded by
!is_eth check. In this way, we clarify in which cases a frame can be
interpreted as IEEE 802.11, and saves us from similar issues in the
future.
Credits: this change as part of xmit encapsulation offloading support
was originally made by QCA and then submitted for inclusion by John
Crispin [1]. But the whole work was not accepted due to the lack of a
part for 64-bits descriptors [2]. Zhijun You then pointed this out to me
in a reply to my initial RFC patch series. And I made this slightly
reworked version that covered all the HTT Tx handler variants.
Sergey Ryazanov [Wed, 18 May 2022 07:27:26 +0000 (10:27 +0300)]
ath10k: improve tx status reporting
We use ieee80211_tx_status() to report each completed tx frame.
Internally, this function calls sta_info_get_by_addrs(), what has a
couple of drawbacks:
1. additional station lookup causes a performance degradation;
2. mac80211 can not properly account Ethernet encapsulated frames due
to the inability to properly determine the destination (station) MAC
address since ieee80211_tx_status() assumes the frame has a 802.11
header.
The latter is especially destructive if we want to use hardware frames
encapsulation.
To fix both of these issues, replace ieee80211_tx_status() with
ieee80211_tx_status_ext() call and feed it station pointer from the tx
queue associated with the transmitted frame.
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge rising - but instead rely on Devicetree to configure it.
All Qualcomm DTSI with WCN3990 define the interrupt type as level high,
so the mismatch between DTSI and driver causes rebind issues:
$ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind
$ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind
[ 44.763114] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000!
[ 44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found
[ 44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6
Fixes: c963a683e701 ("ath10k: add resource init and deinit for WCN3990") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220513151516.357549-1-krzysztof.kozlowski@linaro.org
m68k: atari: Make Atari ROM port I/O write macros return void
The macros implementing Atari ROM port I/O writes do not cast away their
output, unlike similar implementations for other I/O buses.
When they are combined using conditional expressions in the definitions of
outb() and friends, this triggers sparse warnings like:
drivers/net/appletalk/cops.c:382:17: error: incompatible types in conditional expression (different base types):
drivers/net/appletalk/cops.c:382:17: unsigned char
drivers/net/appletalk/cops.c:382:17: void
Kaixu Xia [Sun, 22 May 2022 06:47:11 +0000 (16:47 +1000)]
xfs: reduce IOCB_NOWAIT judgment for retry exclusive unaligned DIO
Retry unaligned DIO with exclusive blocking semantics only when the
IOCB_NOWAIT flag is not set. If we are doing nonblocking user I/O,
propagate the error directly.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 06:00:26 +0000 (16:00 +1000)]
xfs: rename struct xfs_attr_item to xfs_attr_intent
Everywhere else in XFS, structures that capture the state of an ongoing
deferred work item all have names that end with "_intent". The new
extended attribute deferred work items are not named as such, so fix it
to follow the naming convention used elsewhere.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Christophe Leroy [Thu, 19 May 2022 17:24:15 +0000 (19:24 +0200)]
powerpc/fsl_book3e: Don't set rodata RO too early
On fsl_book3e, rodata is set read-only at the same time as
init text is set NX at the end of init. That's too early.
As both action are performed at the same time, delay both
actions to the time rodata is expected to be made read-only.
It means we will have a small window with init mem freed but
still executable. It shouldn't be an issue though, especially
because the said memory gets poisoned and should therefore
result to a bad instruction fault in case it gets executed.
mmu_mark_initmem_nx() is bailing out before doing anything when
CONFIG_STRICT_KERNEL_RWX is not selected or rodata_enabled is false.
mmu_mark_rodata_ro() is called only when CONFIG_STRICT_KERNEL_RWX
is selected and rodata_enabled is true so this is equivalent.
Move code from mmu_mark_initmem_nx() into mmu_mark_rodata_ro() and
remove the call to strict_kernel_rwx_enabled() which is not needed
anymore.
Joel Stanley [Thu, 19 May 2022 12:57:06 +0000 (22:27 +0930)]
powerpc/microwatt: Add mmu bits to device tree
In commit 5402e239d09f ("powerpc/64s: Get LPID bit width from device
tree") the kernel tried to determine the pid and lpid bits from the
device tree. If they are not found, there is a fallback, but Microwatt
wasn't covered as it has the unusual configuration of being both !HV and
bare metal.
Set the values in the device tree to avoid having to add a special case.
The lpid value is the only one required, but add both for completeness.
Fixes: 5402e239d09f ("powerpc/64s: Get LPID bit width from device tree") Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220519125706.593532-1-joel@jms.id.au
powerpc/powernv/flash: Check OPAL flash calls exist before using
Currently only FSP based powernv systems supports firmware update
interfaces. Hence check that the token OPAL_FLASH_VALIDATE exists
before initalising the flash driver.
Reza Arbab [Tue, 3 May 2022 17:01:52 +0000 (12:01 -0500)]
powerpc: Enable the DAWR on POWER9 DD2.3 and above
The hardware bug in POWER9 preventing use of the DAWR was fixed in
DD2.3. Set the CPU_FTR_DAWR feature bit on these newer systems to start
using it again, and update the documentation accordingly.
The CPU features for DD2.3 are currently determined by "DD2.2 or later"
logic. In adding DD2.3 as a discrete case for the first time here, I'm
carrying the quirks of DD2.2 forward to keep all behavior outside of
this DAWR change the same. This leaves the assessment and potential
removal of those quirks on DD2.3 for later.
Michael Ellerman [Thu, 19 May 2022 05:03:57 +0000 (15:03 +1000)]
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
CPU_FTRS_POWER10 is missing from the CPU_FTRS_ALWAYS mask.
Currently that doesn't cause any bug, because it is a superset of the
POWER9 mask, which the exception of CPU_FTR_TM, but POWER7 doesn't have
CPU_FTR_TM, so CPU_FTR_TM is not in the ALWAYS mask to begin with.
However for consistency, and to be robust against future changes, it
should be included in the ALWAYS mask.
Michael Ellerman [Thu, 19 May 2022 04:30:56 +0000 (14:30 +1000)]
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
CPU_FTRS_POWER9_DD2_2 is missing from CPU_FTRS_ALWAYS.
That doesn't cause any bug, because CPU_FTRS_POWER9_DD2_2 adds new bits
that don't appear in other values, so when anded with the other masks
the result is the same.
But for consistency we should have all values in the CPU_FTRS_ALWAYS
mask, so that the logic is robust against the values being changed in
future.
Darrick J. Wong [Sun, 22 May 2022 05:59:48 +0000 (15:59 +1000)]
xfs: clean up state variable usage in xfs_attr_node_remove_attr
The state variable is now a local variable pointing to a heap
allocation, so we don't need to zero-initialize it, nor do we need the
conditional to decide if we should free it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 05:59:48 +0000 (15:59 +1000)]
xfs: put attr[id] log item cache init with the others
Initialize and destroy the xattr log item caches in the same places that
we do all the other log item caches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 05:59:48 +0000 (15:59 +1000)]
xfs: remove struct xfs_attr_item.xattri_flags
Nobody uses this field, so get rid of it and the unused flag definition.
Rearrange the structure layout to reduce its size from 104 to 96 bytes.
This gets us from 39 to 42 objects per page.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 05:59:48 +0000 (15:59 +1000)]
xfs: use a separate slab cache for deferred xattr work state
Create a separate slab cache for struct xfs_attr_item objects, since we
can pack the (104-byte) intent items more tightly than we can with the
general slab cache objects. On x86, this means 39 intents per memory
page instead of 32.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 05:59:48 +0000 (15:59 +1000)]
xfs: put the xattr intent item op flags in their own namespace
The flags that are stored in the extended attr intent log item really
should have a separate namespace from the rest of the XFS_ATTR_* flags.
Give them one to make it a little more obvious that they're intent item
flags.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Darrick J. Wong [Sun, 22 May 2022 05:59:34 +0000 (15:59 +1000)]
xfs: clean up xfs_attr_node_hasname
The calling conventions of this function are a mess -- callers /can/
provide a pointer to a pointer to a state structure, but it's not
required, and as evidenced by the last two patches, the callers that do
weren't be careful enough about how to deal with an existing da state.
Push the allocation and freeing responsibilty to the callers, which
means that callers from the xattr node state machine steps now have the
visibility to allocate or free the da state structure as they please.
As a bonus, the node remove/add paths for larp-mode replaces can reset
the da state structure instead of freeing and immediately reallocating
it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 3752e453f6ba ("selftests/powerpc: Add tests of PMU EBBs") added
selftest testcases to verify EBB interface. instruction_count_test.c
testcase needs a fixed loop function to count overhead. Instead of using
the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb
folder, file is linked with thirty_two_instruction_loop() in loop.S from
top folder. Since fixed_instruction_loop.S not used, patch removes the
file.
Vaibhav Jain [Wed, 11 May 2022 08:26:36 +0000 (13:56 +0530)]
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
Right now 'char *' elements allocated for individual 'stat_id' in
'papr_scm_priv.nvdimm_events_map[]' during papr_scm_pmu_check_events(), get
leaked in papr_scm_remove() and papr_scm_pmu_register(),
papr_scm_pmu_check_events() error paths.
Also individual 'stat_id' arent NULL terminated 'char *' instead they are fixed
8-byte sized identifiers. However papr_scm_pmu_register() assumes it to be a
NULL terminated 'char *' and at other places it assumes it to be a
'papr_scm_perf_stat.stat_id' sized string which is 8-byes in size.
Fix this by allocating the memory for papr_scm_priv.nvdimm_events_map to also
include space for 'stat_id' entries. This is possible since number of available
events/stat_ids are known upfront. This saves some memory and one extra level of
indirection from 'nvdimm_events_map' to 'stat_id'. Also rest of the code
can continue to call 'kfree(papr_scm_priv.nvdimm_events_map)' without needing to
iterate over the array and free up individual elements.
Miaoqian Lin [Thu, 12 May 2022 12:37:18 +0000 (16:37 +0400)]
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Miaoqian Lin [Thu, 12 May 2022 09:05:33 +0000 (13:05 +0400)]
powerpc/xive: Fix refcount leak in xive_spapr_init
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512090535.33397-1-linmq006@gmail.com
Oscar Salvador [Mon, 11 Apr 2022 07:49:34 +0000 (09:49 +0200)]
powerpc/numa: Associate numa node to its cpu earlier
powerpc is the only platform that do not rely on
cpu_up()->try_online_node() to bring up a numa node,
and special cases it, instead, deep in its own machinery:
This should not be needed, but the thing is that the try_online_node()
from cpu_up() will not apply on the right node, because cpu_to_node()
will return the old mapping numa<->cpu that gets set on boot stage
for all possible cpus.
That can be seen easily if we try to print out the numa node passed
to try_online_node() in cpu_up().
The thing is that the numa<->cpu mapping does not get updated till a much
later stage in start_secondary:
But we do not really care, as we already now the
CPU <-> NUMA associativity back in find_and_online_cpu_nid(),
so let us make use of that and set the proper numa<->cpu mapping,
so cpu_to_node() in cpu_up() returns the right node and
try_online_node() can do its work.
Signed-off-by: Oscar Salvador <osalvador@suse.de> Tested-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220411074934.4632-1-osalvador@suse.de
Randy Dunlap [Sun, 10 Apr 2022 16:10:35 +0000 (09:10 -0700)]
macintosh: via-pmu and via-cuda need RTC_LIB
Fix build when RTC_LIB is not set/enabled.
Eliminates these build errors:
m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time':
drivers/macintosh/via-pmu.c:1769: undefined reference to `rtc_tm_to_time64'
m68k-linux-ld: drivers/macintosh/via-cuda.o: in function `cuda_set_rtc_time':
drivers/macintosh/via-cuda.c:797: undefined reference to `rtc_tm_to_time64'
Fixes: 0792a2c8e0bb ("macintosh: Use common code to access RTC") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220410161035.592-1-rdunlap@infradead.org
Finn Thain [Thu, 7 Apr 2022 10:11:32 +0000 (20:11 +1000)]
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
make[1]: *** [Makefile:1155: vmlinux] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2
Don't call into the input subsystem unless CONFIG_INPUT is built-in.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
Kajol Jain [Fri, 6 May 2022 06:10:15 +0000 (11:40 +0530)]
powerpc/perf: Fix the threshold compare group constraint for power9
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9).
When scheduling events as a group, all events in that group should
match value in threshold bits (like thresh compare, thresh control,
thresh select). Otherwise event open for the sibling events should fail.
But in the current code, incase thresh compare bits are not valid,
we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and
PM_THRESH_MET (8734340101ec) is expected to fail as both event
request different thresh control bits and invalid thresh compare value.
Result before the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (r8735340401e0).
/bin/dmesg | grep -i perf may provide additional information.
Kajol Jain [Fri, 6 May 2022 06:10:14 +0000 (11:40 +0530)]
powerpc/perf: Fix the threshold compare group constraint for power10
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 8-18 bits for power10).
When scheduling events as a group, all events in that group should
match value in threshold bits. Otherwise event open for the sibling
events should fail. But in the current code, incase thresh compare bits are
not valid, we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid in group_constraint function.
Patch also fixes the p10_thresh_cmp_val function to return -1,
incase threshold bits are not valid and changes corresponding check in
is_thresh_cmp_valid function to return false only when the thresh_cmp
value is less then 0.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (3534401e0) and
PM_THRESH_MET (34340101ec) is expected to fail as both event
request different thresh control bits.
Result before the patch changes:
[command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1
Fixes: 82d2c16b350f7 ("powerpc/perf: Adds support for programming of Thresholding in P10") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506061015.43916-1-kjain@linux.ibm.com
YueHaibing [Tue, 17 May 2022 09:49:00 +0000 (17:49 +0800)]
powerpc/kaslr_booke: Fix build error
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘kaslr_get_cmdline’:
arch/powerpc/mm/nohash/kaslr_booke.c:46:2: error: implicit declaration of function ‘early_init_dt_scan_chosen’
early_init_dt_scan_chosen(boot_command_line);
^~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘get_initrd_range’:
arch/powerpc/mm/nohash/kaslr_booke.c:210:10: error: implicit declaration of function ‘of_read_number’
start = of_read_number(prop, len / 4);
^~~~~~~~~~~~~~
YueHaibing [Tue, 17 May 2022 09:48:30 +0000 (17:48 +0800)]
powerpc/book3e: Fix build error
arch/powerpc/mm/nohash/fsl_book3e.c: In function ‘relocate_init’:
arch/powerpc/mm/nohash/fsl_book3e.c:348:2: error: implicit declaration of function ‘early_get_first_memblock_info’
early_get_first_memblock_info(__va(dt_ptr), &size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add missing include file linux/of_fdt.h to fix this.
Fixes: 86c38fec69a4 ("powerpc: Remove asm/prom.h from all files that don't need it") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220517094830.27560-1-yuehaibing@huawei.com
Daniel Axtens [Wed, 18 May 2022 10:05:31 +0000 (20:05 +1000)]
powerpc: Book3S 64-bit outline-only KASAN support
Implement a limited form of KASAN for Book3S 64-bit machines running under
the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the
shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in
vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't
instrument all kernel addresses - only linear map and vmalloc. On boot,
set up a single page of read-only shadow that marks all iomap and
vmemmap accesses as valid.
- Document KASAN in powerpc docs.
Background
----------
KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to
catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot,
including a lot of generic device-tree parsing code which is used to
determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective
address c000...-c008.... This is a one-to-one mapping with physical
memory from 0000... onward. Because of how memory accesses work on
powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
same memory both with translations on (accessing as an 'effective
address'), and with translations off (accessing as a 'real
address'). This works in both guests and the hypervisor. For more
details, see s5.7 of Book III of version 3 of the ISA, in particular
the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations
off after boot.
- Therefore any offset has to point to memory that is valid with
translations on or off.
One approach is just to give up on inline instrumentation. This way
boot-time checks can be delayed until after the MMU is set is up, and we
can just not instrument any code that runs with translations off after
booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with
some unfortunate restrictions: only physically contiguous memory could be
used and it had to be specified at compile time. Maybe we can do better in
the future.
[paulus@ozlabs.org - Rebased onto 5.17. Note that a kernel with
CONFIG_KASAN=y will crash during boot on a machine using HPT
translation because not all the entry points to the generic
KASAN code are protected with a call to kasan_arch_is_ready().]
Originally-by: Balbir Singh <bsingharora@gmail.com> # ppc64 out-of-line radix version Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Update copyright year and comment formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTE69OQwiG7z+Gu@cleo
Daniel Axtens [Wed, 18 May 2022 10:07:05 +0000 (20:07 +1000)]
powerpc/kasan: Disable address sanitization in kexec paths
The kexec code paths involve code that necessarily run in real mode, as
CPUs are disabled and control is transferred to the new kernel. Disable
address sanitization for the kexec code and the functions called in real
mode on CPUs being disabled.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
Daniel Axtens [Wed, 18 May 2022 10:06:17 +0000 (20:06 +1000)]
powerpc/kasan: Don't instrument non-maskable or raw interrupts
Disable address sanitization for raw and non-maskable interrupt
handlers, because they can run in real mode, where we cannot access
the shadow memory. (Note that kasan_arch_is_ready() doesn't test for
real mode, since it is a static branch for speed, and in any case not
all the entry points to the generic KASAN code are protected by
kasan_arch_is_ready guards.)
The changes to interrupt_nmi_enter/exit_prepare() look larger than
they actually are. The changes are equivalent to adding
!IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or
nmi_exit() in real mode. That is, the code is equivalent to using the
following condition for calling nmi_enter/exit:
That unwieldy condition has been split into several statements with
comments, for easier reading.
The nmi_ipi_lock functions that call atomic functions (i.e.,
nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides
being marked noinstr, now call arch_atomic_* functions instead of
atomic_* functions because with KASAN enabled, the atomic_* functions
are wrappers which explicitly do address sanitization on their
arguments. Since we are trying to avoid address sanitization, we have
to use the lower-level arch_atomic_* versions.
In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call
has been open-coded so as to avoid having to either trust the inlining
or mark regs_set_unrecoverable() as noinstr.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
Russell Currey [Tue, 8 Jun 2021 06:48:09 +0000 (16:48 +1000)]
selftests/powerpc: Better reporting in spectre_v2
In commit f3054ffd71b5 ("selftests/powerpc: Return skip code for
spectre_v2"), the spectre_v2 selftest is updated to be aware of cases
where the vulnerability status reported in sysfs is incorrect, skipping
the test instead.
This happens because qemu can misrepresent the mitigation status of the
host to the guest. If the count cache is disabled in the host, and this
is correctly reported to the guest, then the guest won't apply
mitigations. If the guest is then migrated to a new host where
mitigations are necessary, it is now vulnerable because it has not
applied mitigations.
Update the selftest to report when we see excessive misses, indicative of
the count cache being disabled. If software flushing is enabled, also
warn that these flushes are just wasting performance.
Russell Currey [Mon, 4 Apr 2022 10:15:36 +0000 (20:15 +1000)]
powerpc/powernv: Get STF barrier requirements from device-tree
The device-tree property no-need-store-drain-on-priv-state-switch is
equivalent to H_CPU_BEHAV_NO_STF_BARRIER from the
H_CPU_GET_CHARACTERISTICS hcall on pseries.
Since commit 84ed26fd00c5 ("powerpc/security: Add a security feature for
STF barrier") powernv systems with this device-tree property have been
enabling the STF barrier when they have no need for it. This patch
fixes this by clearing the STF barrier feature on those systems.
Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-2-ruscur@russell.cc
Russell Currey [Mon, 4 Apr 2022 10:15:35 +0000 (20:15 +1000)]
powerpc/powernv: Get L1D flush requirements from device-tree
The device-tree properties no-need-l1d-flush-msr-pr-1-to-0 and
no-need-l1d-flush-kernel-on-user-access are the equivalents of
H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY and H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS
from the H_GET_CPU_CHARACTERISTICS hcall on pseries respectively.
In commit d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version
check for entry and uaccess flushes") the condition for disabling the
L1D flush on kernel entry and user access was changed from any non-P9
CPU to only checking P7 and P8. Without the appropriate device-tree
checks for newer processors on powernv, these flushes are unnecessarily
enabled on those systems. This patch corrects this.
Fixes: d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-1-ruscur@russell.cc
Pali Rohár [Fri, 6 May 2022 20:36:21 +0000 (22:36 +0200)]
powerpc/85xx/p2020: Add fsl,mpc8548-pmc node
P2020 also contains Power Management Controller and their registers at
offset 0xe0070 compatible with mpc8548. So add PMC node into DTS include
file fsl/p2020si-post.dtsi
powerpc/64: Only WARN if __pa()/__va() called with bad addresses
We added checks to __pa() / __va() to ensure they're only called with
appropriate addresses. But using BUG_ON() is too strong, it means
virt_addr_valid() will BUG when DEBUG_VIRTUAL is enabled.
Instead switch them to warnings, arm64 does the same.
arch/Kconfig: Drop references to powerpc PAGE_SIZE symbols
In the previous commit powerpc added PAGE_SIZE related config symbols
using the generic names.
So there's no need to refer to them in the definition of
PAGE_SIZE_LESS_THAN_64KB etc, the negative dependency on the generic
symbol is sufficient (in this case !PAGE_SIZE_64KB).
Haren Myneni [Sat, 9 Apr 2022 08:44:16 +0000 (01:44 -0700)]
powerpc/powernv/vas: Assign real address to rx_fifo in vas_rx_win_attr
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
The following PPC_INST_XXX macros are not used anymore
outside ppc-opcode.h:
- PPC_INST_LD
- PPC_INST_STD
- PPC_INST_ADDIS
- PPC_INST_ADD
- PPC_INST_DIVD
powerpc/ftrace: Don't use copy_from_kernel_nofault() in module_trampoline_target()
module_trampoline_target() is quite a hot path used when
activating/deactivating function tracer.
Avoid the heavy copy_from_kernel_nofault() by doing four calls
to copy_inst_from_kernel_nofault().
Use __copy_inst_from_kernel_nofault() for the 3 last calls. First call
is done to copy_from_kernel_nofault() to check address is within
kernel space. No risk to wrap out the top of kernel space because the
last page is never mapped so if address is in last page the first copy
will fails and the other ones will never be performed.
And also make it notrace just like all functions that call it.
Steve French [Sun, 22 May 2022 05:41:41 +0000 (00:41 -0500)]
smb3: add trace point for oplock not found
In order to debug problems with server potentially
sending us an oplock that we don't recognize (or a race
with close and oplock break) it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_oplock_not_found
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sun, 22 May 2022 04:56:16 +0000 (23:56 -0500)]
smb3: add trace point for lease not found issue
When trying to debug problems with server sending us a
lease we don't recognize, it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_lease_not_found
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode. But there maybe already
convert from inline to extent. To solve this issue, we call
filemap_flush first..
Ritesh Harjani [Sun, 15 May 2022 06:37:48 +0000 (12:07 +0530)]
ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.
projects / people / ms / linux.git / log
